Daily Archives

Articles indexed Saturday December 8 2012

Page 1/13 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• LSI RAID-on-chip with RAID6 over two SAS links goes red when HDD enclosure is powered cycled; how to recover?

  - by GregC

  I have a RAID6 array managed by LSI 9286-8e card. I also have Sans Digital 24-bay NexentaSTOR JBOD enclosure with SAS extender built-in. They are connected to separate UPS devices. Normally, I'd shut down the PC, leaving RAID6 in healthy state. But today the power to JBOD enclosure was cut but PC kept running. After restarting the PC, all disks in RAID6 have lit up RED, and the only option in LSI MegaRAID manager app was to reset each disk to unassigned, thereby loosing all data on RAID6 array. Thankfully, I am only testing, but how would I recover if this were to happen in production?

  Read the article

• Debian 3.1 (Sarge) init.d boot order

  - by Adam Lewis

  I am using a TS-7800 single board computer from Technologic Systems that ships with Debian 3.1 (Sarge). I have updated it to Squeeze, but due to various driver issues I have been forced to roll back to Sarge. I am attempting to configure the various drivers and configurations needed for my application services before they start. Ideally I would call one init.d script that contains the drivers / configurations then call the other init.d scripts (one for each process). I am left scratching my head on how to guarantee the boot sequence. I know in later versions of Debian I could use the lbs-header to achieve this; but is there anything comparable to the LBS header in Sarge?

  Read the article

• Wireshark (WinPCap) does not see Intel X520-DA2 10 GbE NIC teaming intermittently

  - by GregC

  I am running a team of two 10 GigE ports on Intel X520-DA2 network card. They work well in tandem and achieve the desired throughput. However, I see an intermittent issue whereby WireShark and my own application (using WinPCap) only show the underlying ports, failing to recognize the team adapter. Details: Intel 17.4 NIC drivers on Windows Server 2008 R2 with all patches. HP DL370 G6 server. RSS enabled on Intel both underlying Intel NICs. The exact error: Unable to open the adapter (rpcap://\Device\NPF_{401D5903-16E7-41DC-8484-5D96765B9692}). failed to set hardware filter to promiscuous mode

  Read the article

• Unix VPS server going down at almost the same time every day

  - by ronnz

  My server load seems to be really spiking and many times the server goes down at the same time each night (Around midnight). I have about 20 cPanel accounts hosted on it and have tried everything I know to try to find what is causing the issue. Some of the things I have tried: Combined all site access logs found in /etc/httpd/domlogs and cannot see anything unusual at the time of server going down. Checked most other logs in the var/log directory and found nothing indicating the issue at the time the server is going down. Checked cron logs and cannot see anything unusual.. See below. Last night CPU spiked to 7.5 at 00:14. What else can I be checking? How can I really monitor to find out the root cause? Dec 8 00:05:01 v1 crond[6082]: (root) CMD (/usr/local/cpanel/bin/dcpumon /dev/null 2&1) Dec 8 00:05:01 v1 crond[6084]: (root) CMD (/usr/local/cpanel/whostmgr/bin/dnsqueue /dev/null 2&1) Dec 8 00:10:01 v1 crond[6435]: (root) CMD (/usr/lib64/sa/sa1 1 1) Dec 8 00:10:01 v1 crond[6436]: (root) CMD (/usr/local/cpanel/bin/dcpumon /dev/null 2&1) Dec 8 00:15:12 v1 crond[6775]: (root) CMD (/usr/local/cpanel/scripts/autorepair recoverymgmt /dev/null 2&1) Dec 8 00:15:12 v1 crond[6776]: (root) CMD (/usr/local/cpanel/scripts/recoverymgmt /dev/null 2&1) Dec 8 00:15:12 v1 crond[6777]: (root) CMD (/usr/local/cpanel/bin/dbindex /dev/null 2&1) Dec 8 00:15:12 v1 crond[6781]: (root) CMD (/usr/local/cpanel/bin/dcpumon /dev/null 2&1) Dec 8 00:20:33 v1 crond[7047]: (root) CMD (/usr/lib64/sa/sa1 1 1)

  Read the article

• The World Wide Web Publishing Service (WWW Service) did not register the URL

  - by Mario

  This error is logged once I create a website: The World Wide Web Publishing Service (WWW Service) did not register the URL prefix http://*:80/ for site 6. The necessary network binding may already be in use. The site has been disabled. The data field contains the error number. I followed this link but there is no ListenOnlyList, instead I saw UrlAclInfo which contains this: Any ideas to fix this?

  Read the article

• Why does RDP Licensing is licensing the same device multiple times? [closed]

  - by NeerPatel

  Possible Duplicate: Can you help me with my software licensing issue? I've got a Citrix XenApp 6.5 Farm running on Win 2008 R2 Servers. I purchased 300 Device RDP/Remote App Licenses for ~200 users. We went with Device licenses, because most of the end users use the same machines. After 1 month of operating, we started to run out of licenses. It turns out the licensing service is consuming multiple licenses for the same machine. I can revoke licenses, but there is a limit to how many I can do. Is this operating correctly? The only explanation I can come up with is that the Licensing service is giving a license to a device for every server it connects to in our Citrix farm.

  Read the article

• What can lead to a zone memory exhaustion and how Nginx reacts to it?

  - by Miles Hughes

  What is a possible scenario for exhausting the memory designated to a connection zone with limit_conn_zone directive and what are the implication in this case? Suppose I have this in my configuration: http { limit_conn_zone $binary_remote_addr zone=connzone:1m; ... server { limit_conn connzone 5; which, according to the documentation, allocates 16000 states for connzone on a 64-bit server. It also says that If the storage for a zone is exhausted, the server will return error 503 (Service Temporarily Unavailable) to all further requests. Well, Ok. But what does it mean on practice? When does this happen? Who receives those 503s? Does it mean that if the number of IPs somehow associated with connzone hits 16000 everyone gets a 503 and it's all over? How does Nginx decide? The documentation is weirdly vague on this. So, considering the example config, who would actually get a 503 and under which circumstances and how would things go from there? Same with request zones?

  Read the article

• How do projects manage chef cookbooks when multiple teams manage multiple sets of cookbooks?

  - by strife25

  I am wondering how projects that have multiple component teams manage their sets of cookbooks? We are trying to figure out how we can have an ops team provide a set of "common component" cookbooks that can be re-used by other teams that will also write their own cookbooks. For example, the ops team should own the Java cookbook, while a component manages their cookbooks written for their component or build engines. From my little experience with chef server, this kind of workflow seems to not be well supported since the server stores and manages all cookbooks - so there is a potential to overwrite a cookbook written by another team. How do other projects deal with this type of problem?

  Read the article

• Getting client denied when accessing a wsgi graphite script

  - by Dr BDO Adams

  I'm trying to set up graphite on my Mac OS X 10.7 lion, i've set up apache to call the python graphite script via WSGI, but when i try to access it, i get a forbiden from apache and in the error log. "client denied by server configuration: /opt/graphite/webapp/graphite.wsgi" I've checked that the scripts location is allowed in httpd.conf, and the permissions of the file, but they seem correct. What do i have to do to get access. Below is the httpd.conf, which is nearly the graphite example. <IfModule !wsgi_module.c> LoadModule wsgi_module modules/mod_wsgi.so </IfModule> WSGISocketPrefix /usr/local/apache/run/wigs <VirtualHost _default_:*> ServerName graphite DocumentRoot "/opt/graphite/webapp" ErrorLog /opt/graphite/storage/log/webapp/error.log CustomLog /opt/graphite/storage/log/webapp/access.log common WSGIDaemonProcess graphite processes=5 threads=5 display-name='%{GROUP}' inactivity-timeout=120 WSGIProcessGroup graphite WSGIApplicationGroup %{GLOBAL} WSGIImportScript /opt/graphite/conf/graphite.wsgi process-group=graphite application-group=%{GLOBAL} # XXX You will need to create this file! There is a graphite.wsgi.example # file in this directory that you can safely use, just copy it to graphite.wgsi WSGIScriptAlias / /opt/graphite/webapp/graphite.wsgi Alias /content/ /opt/graphite/webapp/content/ <Location "/content/"> SetHandler None </Location> # XXX In order for the django admin site media to work you Alias /media/ "/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site- packages/django/contrib/admin/media/" <Location "/media/"> SetHandler None </Location> # The graphite.wsgi file has to be accessible by apache. <Directory "/opt/graphite/webapp/"> Options +ExecCGI Order deny,allow Allow from all </Directory> </VirtualHost> Can you help?

  Read the article

• How do I protect business critical data against fire?

  - by Bill Knowles

  We have 72 hard drives that contain our webcast inventory. The number is increasing. We're located in a frame building and we are afraid of not only fire, but catastrophic fire. I've priced fireproof safes that hold to the required 125F for hard drives. Their price is through the roof. Seems to me if we made backups of each of the hard drives and stored them off-site somewhere, or contracted with an online backup storage company, we might run up a bill buying backup drives that would approach the $7,000 cost of the safe! What's the best way to protect our data from the risk of fire?

  Read the article

• Red Hat Yum not working out of the box?

  - by Tucker

  I have a server runnning Red Hat Enterprise Linux v5.6 in the cloud. My project constraints do not allow me to use another OS. When I created the cloud server, I was able to SSH into it and access the shell. I next ran the command: sudo yum update But the command failed. About a month ago I created another server with the same machine image and didn't have that error. Why is it failing now? The following is the terminal output sudo yum update Loaded plugins: security Repository rhel-server is listed more than once in the configuration Traceback (most recent call last): File "/usr/bin/yum", line 29, in ? yummain.user_main(sys.argv[1:], exit_code=True) File "/usr/share/yum-cli/yummain.py", line 309, in user_main errcode = main(args) File "/usr/share/yum-cli/yummain.py", line 178, in main result, resultmsgs = base.doCommands() File "/usr/share/yum-cli/cli.py", line 345, in doCommands self._getTs(needTsRemove) File "/usr/lib/python2.4/site-packages/yum/depsolve.py", line 101, in _getTs self._getTsInfo(remove_only) File "/usr/lib/python2.4/site-packages/yum/depsolve.py", line 112, in _getTsInfo pkgSack = self.pkgSack File "/usr/lib/python2.4/site-packages/yum/__init__.py", line 662, in <lambda> pkgSack = property(fget=lambda self: self._getSacks(), File "/usr/lib/python2.4/site-packages/yum/__init__.py", line 502, in _getSacks self.repos.populateSack(which=repos) File "/usr/lib/python2.4/site-packages/yum/repos.py", line 260, in populateSack sack.populate(repo, mdtype, callback, cacheonly) File "/usr/lib/python2.4/site-packages/yum/yumRepo.py", line 168, in populate if self._check_db_version(repo, mydbtype): File "/usr/lib/python2.4/site-packages/yum/yumRepo.py", line 226, in _check_db_version return repo._check_db_version(mdtype) File "/usr/lib/python2.4/site-packages/yum/yumRepo.py", line 1233, in _check_db_version repoXML = self.repoXML File "/usr/lib/python2.4/site-packages/yum/yumRepo.py", line 1406, in <lambda> repoXML = property(fget=lambda self: self._getRepoXML(), File "/usr/lib/python2.4/site-packages/yum/yumRepo.py", line 1398, in _getRepoXML self._loadRepoXML(text=self) File "/usr/lib/python2.4/site-packages/yum/yumRepo.py", line 1388, in _loadRepoXML return self._groupLoadRepoXML(text, ["primary"]) File "/usr/lib/python2.4/site-packages/yum/yumRepo.py", line 1372, in _groupLoadRepoXML if self._commonLoadRepoXML(text): File "/usr/lib/python2.4/site-packages/yum/yumRepo.py", line 1208, in _commonLoadRepoXML result = self._getFileRepoXML(local, text) File "/usr/lib/python2.4/site-packages/yum/yumRepo.py", line 989, in _getFileRepoXML cache=self.http_caching == 'all') File "/usr/lib/python2.4/site-packages/yum/yumRepo.py", line 826, in _getFile http_headers=headers, File "/usr/lib/python2.4/site-packages/urlgrabber/mirror.py", line 412, in urlgrab return self._mirror_try(func, url, kw) File "/usr/lib/python2.4/site-packages/urlgrabber/mirror.py", line 398, in _mirror_try return func_ref( *(fullurl,), **kwargs ) File "/usr/lib/python2.4/site-packages/urlgrabber/grabber.py", line 936, in urlgrab return self._retry(opts, retryfunc, url, filename) File "/usr/lib/python2.4/site-packages/urlgrabber/grabber.py", line 854, in _retry r = apply(func, (opts,) + args, {}) File "/usr/lib/python2.4/site-packages/urlgrabber/grabber.py", line 922, in retryfunc fo = URLGrabberFileObject(url, filename, opts) File "/usr/lib/python2.4/site-packages/urlgrabber/grabber.py", line 1010, in __init__ self._do_open() File "/usr/lib/python2.4/site-packages/urlgrabber/grabber.py", line 1093, in _do_open fo, hdr = self._make_request(req, opener) File "/usr/lib/python2.4/site-packages/urlgrabber/grabber.py", line 1202, in _make_request fo = opener.open(req) File "/usr/lib64/python2.4/urllib2.py", line 358, in open response = self._open(req, data) File "/usr/lib64/python2.4/urllib2.py", line 376, in _open '_open', req) File "/usr/lib64/python2.4/urllib2.py", line 337, in _call_chain result = func(*args) File "/usr/lib64/python2.4/site-packages/M2Crypto/m2urllib2.py", line 82, in https_open h.request(req.get_method(), req.get_selector(), req.data, headers) File "/usr/lib64/python2.4/httplib.py", line 810, in request self._send_request(method, url, body, headers) File "/usr/lib64/python2.4/httplib.py", line 833, in _send_request self.endheaders() File "/usr/lib64/python2.4/httplib.py", line 804, in endheaders self._send_output() File "/usr/lib64/python2.4/httplib.py", line 685, in _send_output self.send(msg) File "/usr/lib64/python2.4/httplib.py", line 652, in send self.connect() File "/usr/lib64/python2.4/site-packages/M2Crypto/httpslib.py", line 47, in connect self.sock.connect((self.host, self.port)) File "/usr/lib64/python2.4/site-packages/M2Crypto/SSL/Connection.py", line 174, in connect ret = self.connect_ssl() File "/usr/lib64/python2.4/site-packages/M2Crypto/SSL/Connection.py", line 167, in connect_ssl return m2.ssl_connect(self.ssl, self._timeout) M2Crypto.SSL.SSLError: certificate verify failed

  Read the article

• Windows clients unable to access Samba share on AD joined Linux box every 7 days

  - by Hassle2

  The problem: Every 7 days, 2 Windows Servers are unable to access a SMB/CIFS share. It will start working after a handful of hours. The environment: OpenFiler Linux box joined to 2003 AD Domain Foreground app on Win2003 server access the SMB/CIFS share with windows credentials Another process on Win2008 access the share via SQL Server with windows credentials The Samba version on the Linux box is 3.4.5. Security is set to ADS wbinfo and getent return back expected users and groups Does not look to be a double hop issue as it's always the 2 accounts, regardless of the calling user. There is a DNS entry in both forward and reverse lookup zone for the linux box The linux box's computer object in active directory shows that it was modified around/at the same time that the two clients started failing to access the share Trying to access the share via IP works when by name does not Rebooting the Windows server takes care of it (it's production and only restarted it once) Restarting smbd, winbind, nmbd had no effect Error in samba log for the client in question: smbd/sesssetup.c:342(reply_spnego_kerberos) Failed to verify incoming ticket with error NT_STATUS_LOGON_FAILURE! The Question: Does this look like the machine account password is changing (hence the AD object showing the updated modified date) or are the two windows clients unable to request a new ticket that works against this linux box?

  Read the article

• Bind ADFS 2.0 service to a specific IP address

  - by ccellar

  I have one server with ADFS-2.0 and a few websites on it. One of the websites is Dynamics CRM which listens on a specific IP address on port 443. Dynamics CRM provides a metadata file for configuration purposes which could be used to configure a relaying party trust with ADFS. It is accessible with the URL https://auth.contoso.com/FederationMetadata/2007-06/federationmetadata.xml The problem is that ADFS-2.0 installs a service which registers following urlacl https://+:443/FederationMetadata/2007-06/ This means the result of accessing the URL https://auth.contoso.com/FederationMetadata/2007-06/federationmetadata.xml is the metadata file of ADFS, not the one of Dynamics CRM. I've tried to delete the default urlacl and added (one of them at a time) https://192.168.1.2:443/FederationMetadata/2007-06/ https://adfs.mydomain.com:443/FederationMetadata/2007-06/ but neither of them worked. Instead the ADFS-service failed to startup complete. Is there any way to bind this service to a IP address? At the moment I see only two alternatives Bind the service to a non standard port. This leads to problems because this means that also the ADFS website has to use a non-standard HTTPS-port. Install ADFS-2.0 on a different server (this is my favorite alternative - however it is not possible in every situation...)

  Read the article

• Is it possible to skip .rvmrc confirmation?

  - by Viacheslav Molokov

  We are using RVM for managing Ruby installations and environments. Usually we are using this .rvmrc script: #!/bin/bash if [ ! -e '.version' ]; then VERSION=`pwd | sed 's/[a-z/-]//g'` echo $VERSION > .version rvm gemset create $VERSION fi VERSION=`cat .version` rvm use 1.9.2@$VERSION This script forces RVM to create new gem environment for each our project/version. But each time we was deploying new version RVM asks us to confirm new .rvmrc file. When we cd to this directory first time, we are getting something like: =============================================================== = NOTICE: = =============================================================== = RVM has encountered a not yet trusted .rvmrc file in the = = current working directory which may contain nasty code. = = = = Examine the contents of this file to be sure the contents = = are good before trusting it! = = = = Press 'q' to exit the reader when finished reading the file = =============================================================== (press enter to continue when ready) This is not as bad for development environments, but with auto deploy it require to manually confirm each new version on each server. Is it possible to skip this confirmation?

  Read the article

• SQL Server Installation: Is it 32 or 64 bit?

  - by CapBBeard

  Recently I was performing an OS upgrade on one of our DB servers, moving from Server 2003 to Server 2008. The DBMS is SQL Server 2005. While reinstalling SQL on the new Windows installation, I went to another of our DB servers to verify a couple of settings. Now, I always thought this second server was Server 2003 x64 + SQL 2005 x64 (from what I'd been told), but I now have my doubts about this. I now suspect that it is in fact only 32 bit SQL, however I'd like to verify this. Here's some details: The OS is definitely 64 bit. xp_msver shows Platform as NT INTEL X86 SELECT @@VERSION shows Microsoft SQL Server 2005 - 9.00.4035.00 (Intel X86)... However sqlservr.exe is not shown with '* 32' in taskmgr, does anyone know why this is the case, if it is in fact 32 bit as claimed? Despite this, it does seem to be running out of the x86 program files folder. If I do the same checks on a confirmed 64 bit installation, it does give back the expected 64 bit readings, which can only prove that this server in question is only running in 32 bit. Now, that being the case, the question arises about how much memory this '32 bit' install can use. Task manager reports about 3.5GB memory usage for sqlservr.exe (The server has 16GB physical). I suspect that AWE has not been configured at all, and therefore the server will be significantly under-utilised (remembering that the OS is 64 bit) if SQL is simply using a 32bit address space. Is this assumption correct? I feel the server should have SQL reinstalled as 64 bit in order to fully utilise the hardware platform, however it is currently heavily in production; this will be no easy task. I suspect we may just have to configure AWE correctly and let it be for the time being (Unless this is a bad idea?). I apologise that this question is a little vague/lost; I'm no SQL expert, just trying to get a handle on what's going on here.

  Read the article

• Should I use SSD Caching on non bootable HD?

  - by Onema

  I have an asus 9p79x pro which allows me to do SSD Caching. I have a 256 GB SSD drive that I use an my primary boot drive, and I have a 1 TB disk where I put most of my games, music, videos, dowloads, pictures, etc. I also have an extra 64 GB SSD Drive that I'm currently not using. I thought it would be a good idea to use it as my 1 TB disk cache and improve the load time of games and programs that are installed on the 1 TB disk; but will this work correctly? It seems from all that I have read online about this board that it is used to cache a boot drive. Any thoughts? Thank you

  Read the article

• Unable to stop chrome.exe *32

  - by chipperyman573

  So I was installing roboform today and was unable to stop the process chrome.exe *32... Even when I uninstalled chrome. This is the error I got: I used lockhunter and it said it was located in %appdata%\Local\Google\Chrome. However, it was unable to unlock, delete or rename. When I use explorer to delete or rename that folder, it says it's being used by Chrome. Even after restarting my computer it still does this. I've tried using the built in chrome task manager (Wrench View Background Pages) and I can't seem to find a process there that has the same amount of memory. I have run many, many virus scans, by: Microsoft security essentials AVG (Free version) Malwarebytes (Pro version) Norton 360 (Pro version) McAfee (Pro Version) Avira (Free version) Avast! Antivirus (Free version) None of which returned with any viruses. Chrome info: Google Chrome 23.0.1271.95 (Official Build 169798) OS Windows 7 Professional WebKit 537.11 (@135931) JavaScript V8 3.13.7.5 Flash 11.5.31.2 User Agent Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.11 (KHTML, like Gecko) Chrome/23.0.1271.95 Safari/537.11

  Read the article

• How to get AMD Catalyst working on Arch x86_64

  - by gh403

  I've got a Dell Inspiron 15R 7520 with AMD's hybrid "PowerXpress" graphics. The integrated graphics card is (if I understand it correctly) integrated with the i7-3612QM processor, and the discrete graphics card is a "Southern Islands" Radeon HD 7730M. The integrated graphics work perfectly under Arch. However, the discrete graphics don't. I have tried several different methods, and the one that seems to get me the farthest with the least effort is the AUR package catalyst-total-pxp. After installing, rebooting, and issuing the commands # aticonfig --initial # pxp_switch_catalyst amd # X X completely fails to start. The X log can be found here. I don't understand what is failing; potentially, it has something to do with the way my card is hooked up--I think it's muxless, but I really don't know. What is the matter here? Any help would be appreciated.

  Read the article

• What would I need to do to clone a Linux install to another machine?

  - by Marcus Hughes

  Basically, I want to make an image of one Linux install I have, and distribute it over similar (if not identical) spec machines on a network. I know it is possible, however am unsure of what needs to be done before I make the image of the install to ensure it works correctly on all machines. First think I know needs to be done, is remove all interface configuration, as I assume it would just jump to eth1 (and possibly use the same MAC), as it wont locate the network interface it had before, how would I do this so it auto detects and goes to eth0 again? Is there anything else I would need to do to the install before I make its image?

  Read the article

• Debian 3.1 (Sarge) init.d boot order

  - by Adam Lewis

  I am using a TS-7800 single board computer from Technologic Systems that ships with Debian 3.1 (Sarge). I have updated it to Squeeze, but due to various driver issues I have been forced to roll back to Sarge. I am attempting to configure the various drivers and configurations needed for my application services before they start. Ideally I would call one init.d script that contains the drivers / configurations then call the other init.d scripts (one for each process). I am left scratching my head on how to guarantee the boot sequence. I know in later versions of Debian I could use the lbs-header to achieve this; but is there anything comparable to the LBS header in Sarge?

  Read the article

• http://localhost/~admin/ gets a 403

  - by Pavan Katepalli

  When I go to localhost/~admin/ or 127.0.0.1/~admin/ my browser says: "Forbidden You don't have permission to access /~admin/ on this server." How do I change this?!??!?! It's driving me nuts! when I go to localhost or 127.0.0.1/ my browser says: "It Works!". I'm running mac osx 10.8. I created aliases in my .bash_profile file so that I can start, restart and stop Apache quickly: alias startApache="sudo apachectl start" alias stopApache="sudo apachectl stop" alias restartApache="sudo apachectl restart" In my /etc/apache2/httpd.conf file I turned on php5: LoadModule php5_module libexec/apache2/libphp5.so I also made sure to change the permissions for my admin.conf file with this command in terminal: sudo chmod 644 username.conf This is my /etc/apache2/users/admin.conf: <Directory "/Users/admin/Sites/"> Options Indexes MultiViews AllowOverride All Order allow,deny Allow from all </Directory>

  Read the article

• Select a word using keyboard special case

  - by wataka

  I know the Ctrl+Shift+Arrow_Key to select a word. But suppose this is the case: "Hello!, my na|me is Peter" Where the cursor is where the pipe is. I'm looking for some keyboard shorcut that select the word "name". The only way I found was: Ctrl+Right, Left, Ctrl+Shift+Left. But it isn't practical. Any hint? Edit: I'm on Windows 7, and I'd like some generic solution if exists (not software dependent)

  Read the article

• Can I use a mini PCI-E card in a standard motherboard with PCI/PCI Express slots?

  - by White Phoenix

  I'm helping someone build a computer and they absolutely insist on having an internal Bluetooth adapter. I've been searching around for a PCI-E/PCI based Bluetooth adapter but I've had no luck finding one - I've found some discontinued ones but they have giant antennas coming out the back - the person I'm building the computer for doesn't want that. I've been repeatedly insisting on him simply getting a USB Bluetooth dongle, but he doesn't want one taking up his external USB slots. This is the motherboard I'm using for his build: http://www.newegg.com/Product/Product.aspx?Item=N82E16813157303 My question is if it's possible to use one of those laptop PCI-E cards in a motherboard like this that has PCI-E and PCI slots, or if the form factor is completely different and won't fit?

  Read the article

• CHKDSK error code 766f6c756d652e63 3f1

  - by BenjiWiebe

  On a Windows 7 computer, running chkdsk /r /f C: in repair mode, it gives the error, Unspecified error 766f6c756d652e63 3f1. or something like that. I have tried the following: uninstalling all antivirus software scanning with MalwareByte's Anti-Malware doing a Disk Cleanup running Disk Defrag booting TRK and running fsck -t ntfs (gives error Unsupported case. and not implemented). I have also tried a System Restore, but there is a Temporary Internet file that appears to be in all restore points, and that file must be corrupted or something, because System Restore always grinds to a halt when it gets to that file. What should I try next? Thanks in advance.

  Read the article

• Where / how does Apache generate the HTML code used in the default directory listing?

  - by Ellen B

  I am looking to modify the HTML that apache generates for its default directory listing. I already know how to create a HEADER.html file that gets included for every directory listing. I am attempting to change the actual html that Apache generates for the file listing itself; right now my MacOS apache generates this for example: <table><tr><th><img src="/icons/blank.gif" alt="[ICO]"></th><th><a href="?C=N;O=D">Name</a></th><th><a href="?C=M;O=A">Last modified</a></th><th><a href="?C=S;O=A">Size</a></th><th><a href="?C=D;O=A">Description</a></th></tr><tr><th colspan="5"><hr></th></tr> <tr><td valign="top"><img src="/icons/folder.gif" alt="[DIR]"></td><td><a href="ios-prototype/">ios-prototype/</a> </td><td align="right">07-Dec-2012 16:47 </td><td align="right"> - </td><td>&nbsp;</td></tr> <tr><td valign="top"><img src="/icons/folder.gif" alt="[DIR]"></td><td><a href="magneto-git/">magneto-git/</a> </td><td align="right">07-Dec-2012 16:46 </td><td align="right"> - </td><td>&nbsp;</td></tr> <tr><th colspan="5"><hr></th></tr> </table> I want a different HTML structure (like, say, an OL) generated when my server spits back directory listings. (FYI I'm doing a bunch of mobile browser prototyping with my local webserver & need to make it not totally horrible to browse with fingers to the right test directory — the table structure sucks, and while I can mod a lot of it with CSS it's still going to be ganky.)

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >