Search Results

Search found 58734 results on 2350 pages for 'windows batch'.

Page 1069/2350 | < Previous Page | 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076  | Next Page >

  • How to "restart/repair" an USB port?

    - by Click Ok
    My laptop have 2 usb ports, but one is broken, so I use an USB hub in the another good USB port. In that USB hub, I use a mouse and keyboard. Suddenly, that USB port doesn't detects the mouse and keyboard (even with the light of the hub is on), and the only solution that I found is restarting the laptop. But just some minutes and the keyboard and mouse goes undetected again... So, I wonder if there is some method/software/etc to "restart/repair" the USB port without restart the PC. Thanks for all!

    Read the article

  • How to check use of userva boot option on Win 2K3 server

    - by Tim Sylvester
    I have some 32-bit Win2K3 servers running an application that fails now and then apparently due to heap fragmentation. (Process virtual bytes grows, private bytes does not) I do not have access to the source code or build process of this application. I have modified the boot.ini file on one of these servers to include /userva=2560, half way between the normal mode of operation and the /3GB option. Normally it takes weeks to reach the point of failure, but I'd like to see right away whether this has actually had any effect. As I understand it, this option limits the kernel to the remaining address space (1536MB instead of 2048), but does not necessarily give an application the extra address space, depending on the flags in the application's PE header. How can I determine whether the O/S is allowing a particular application, running in production, to access address space above 2GB? Additionally, what's the best way to monitor the system to ensure that the kernel is not starved for address space, and more generally how should I go about finding the optimal value for this setting?

    Read the article

  • How do I start silverlight on netflix in full screen automatically?

    - by KronoS
    I know that there this great big button that I can click for full screen on the bottom left of the screen. What I'm doing though is launching the direct movie/tv episode in chrome from XBMC using XBMCflicks. It's like pasting the video html address in the address bar and going directly to the video feed. Here's my dilemma, I want a fully working, no need for a keyboard/mouse HTPC, which means I don't want to have to click on the 'full screen' button. Is there a way to run chrome and silverlight automatically in full screen mode when launched?

    Read the article

  • Two screens hooked to one laptop

    - by mplacona
    Hi, I'm thinking of getting rid of my desktop, and using my (much better) laptop instead. I'm only wondering if I would be able to hook the two screens I have with it, so I'd end up with three screens. I've seen people doing it to desktops, but am not sure the same could be accomplished with a laptop. My laptop is a sony vaio, and it's got both a VGA output, and an HDMI output. It'd be great is I could simply hook two screens to it, and have three independent screens (not mirrored). on my desktop, I have pretty much the same thing, but with an extra DVI port. I connect the DVI to one screen, and the VGA to an older one. Trying to connect anything to the HDMI simply mirrors whatever is on the DVI (I've tried it a long time ago) So I was wondering if with the laptop I'd be able to do it, and end up with three independent screens. I don't know if there's anything else I could be using instead (i.e. any extra hardware), so recommendations are more than welcome. Thanks in advance, Marcos

    Read the article

  • Photo organization software

    - by Aaron
    I am looking for photo organization software for family albums that meets the following requirements: Online Gallery Synchronized Searchable Access Controls Local Copies Synchronized Searchable Multiple individuals Multiple people have local copies All can contribute to tagging It syncs additions/changes/tags to the online gallery, which in turn syncs to other local copies Powerful Tagging Entity based (support multiple people with the same name) Multiple Types of Tags (People, Pets, Things) Coordinate or Full Image Tag can focus on certain area in picture, or reference the full picture Facial Recognition Does anyone know of a piece of software like this? I will pay!!!

    Read the article

  • Virtual PC 2007 Full Screen Resolution

    - by Swami
    I have a laptop (1440 x 900) and an external monitor (1920 x 1200), and I'm running Virtual PC 2007. Initially, my VPC could not switch to fullscreen mode on my external monitor because the max resolution for VPC was only 1600 x 1200. I installed a hotfix (http://support.microsoft.com/kb/958162) and after the hotfix, I was able to view VPC in fullscreen mode on my external monitor, but now I'm unable to view fullscreen on my laptop. It says "please check that the resolution of the guest is not higher than that of the host". I even tried to decrease the resolution of my Virtual PC to less than than of my laptop, but it always resets it back up. So now after the hotfix, I can view fullscreen mode only when my external monitor is plugged in. Any way I can resolve this?

    Read the article

  • How can I run 2 already installed OS at the same time?

    - by eran
    I have Win7 and Ubuntu installed on my PC, and I can choose which to run at boot time. I would like to be able to run the Ubuntu from within the Win7. Tools like VMWare allows one to create a new installation of a guest OS, which could then be run alongside the hosting OS. However, I already have the Ubuntu fully installed on my hard drive, and I'd like to maintain the dual boot option. Ideally, I'd like to be able to create a new virtual machine on my Win7, but instead of installing a new guest OS, just direct it to the existing installation. Is that possible?

    Read the article

  • how to remotely setup powershell to accept Enter-PSSession

    - by user1399195
    I have some computers I'm trying to remotely execute powershell commands but I'm running into some snags. For one thing, the computers do not have Enable-PSRemoting enabled so I am unable to simply Enter-PSSession. I tried to run a powershell script through psexec but I have yet to Set-Execution Policy on the machine. My thoughts were to execute a powershell logon script that accomplished this but before I tried this I was going to see if there were any other methods to enable-psremoting on a machine. Thanks in advance!

    Read the article

  • using wbadmin to backup and recover

    - by g7rpo
    HI I am using wbadmin to perform backups of a specific folder, primarily to backup my VHD files this is working fine but I tried to recover the files today using a different machine to the one which created the backup and couldnt get the machine doing the recovery to 'see' the backups. Is there a way to do this as my worry is that if I have a failure on the host which is perfmorming the backups I need to be able to install hyper-v on another host and recover the backed up VMs to there until I can rebuild the host. It appears that this isnt possible, I am hoping I am missing something. Any help would be greatly appreciated.

    Read the article

  • Way to wake up win-xp pc, without hibernate or network?

    - by crosenblum
    I have no need to wake up a remote pc, just the pc I use at work. I want to wake it up, by itself, without having to use hibernate, which I am not comfortable with, or have ever used. Then I can have the "System Scheduler" freeware that I use, to automatically do anti-virus updates, anti-malware updates, ccleaner /auto of course... It just would make my day's easier if it was already on by the time I arrived, I usually always turn my pc off when I am done with work, or if I didn't, I have a scheduled task to auto-shutdown pc 1 hour after my normal work hours... Without using hibernate, can i get my pc to wake up on it's own at a certain time each weekday?

    Read the article

  • Which project management software for technophobes who've never worked with something like that?

    - by Ernst
    Hi, Our director has asked me to get something to manage projects. Note that so far we haven't used anything of the sort. I did not get very clear instructions yet, probably because she doesn't know exactly what we need either. My guess is, we'll only find out while using something. I've looked at some, openworkbench, ganttproject, and microsoft project. The latter has the advantage of easy importing of users from exchange, are there others that do that (even if not directly, easily)? I don't think it's a critical requirement though. We're using some other custom software where I have to add users manually anyway and we're small enough that it's maybe once a month that I have to add or remove a user. In any case, I'm not in favour of buying anything, since I'm skeptic about us actually succeeding in putting it to good use, and even if we do, we will only during usage discover what we need. We're also not a tech shop, most people vary from not very technically adept to technophobic. This means we need something very userfriendly. I prefer to stay away from online solutions, since we deal with sensitive information and I prefer to keep that in house, but I guess it would be acceptable for the trial period. An intranet site is an option though, but preferably something that is easy to set up with IIS. Xplanner plus and redmine I found too hard to set up for this experiment. Some other options I haven't yet tried to install, but which look to complex for our technophobes: Endeavour Software Project Management, Project-Open, Trac. Any suggestions? Thanks, Ernst

    Read the article

  • How to know which disk has failed on a Mirrored Raid? marked as DR0

    - by Saariko
    Our 2ndry DC, which is on a W2K8R2 Mirrored software raid has lost it's sync, and disk management displays the failed redundancy error How do I know which of the disks has failed? (beside to try and replace one - and see if it loads and syncs) On the device manager, under disks I see both disks, one of them has an icon of: Disable, while the other doesn't Event log displays an event id 7 - bad block on Hard disk DR0 The thing is that looking in device manager, both disks are located in '0' location, which is bizzare

    Read the article

  • Too many Tunnel Adapter Interfaces

    - by Tomas Lycken
    If I open a command prompt on my machine and type ipconfig /all, I see lots of Tunnel adapter Local Area Connection* 9: Media state . . . . . . . . . . . . . : Media disconnected Connection-specific DNS Sufficx . . . : Description . . . . . . . . . . . . . : Microsoft 6to4 Adapter #5 Physical address. . . . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . . . : No Autoconfiguration Enabled . . . . . . : Yes In fact, they're so many that my "real" adapters are pushed out of the stack, and can't be seen anymore. Is there any flag I can use on ipconfig to hide all virtual interfaces? Or is there some other way around this problem? Since they always say "Media disconnected" I suppose disabling could be an option, but if possible I'd rather not turn any functionality off. I just want to control what output I get from ipconfig. Also, I know these are related to IPv6 stuff. However, most of what I find on google merely states what these are, and that they're harmless - nothing about hiding/removing them.

    Read the article

  • Wireless is connected but no internet when PC Turns on

    - by mhesabi
    I have a PC that is connected to ADSL Modem router (linksys WAG54g2) directly via Ethernet cable And a laptop and also other devices such as another laptops and smarth phones. However when I turn On the PC or turn it off, some strange problem happens. My wireless network seems connected on laptop but there is no internet activity and can't open a webpage until I turn router off and on again manually. (other devices including the PC itself can't use the internet either) My router configured this way: Encapsulation: RFC 2516 PPPoE Multiplexing: LLC DHCP Server: Enabled and network sharing center IPv4 configuration is obtain IP address automatically How Can I fix this issue?

    Read the article

  • Cannot create persistent "open with" association for Photoshop CS4

    - by mark
    I'm trying to fix a computer from a friend, which has for some unknonwn reason installed the 64bit and 32bit version of CS4. The 64bit version does not work, the 32bit does. However it seems that the 64bit version was the first installed one, associations to the .psd files are going to the 64bit version. There seems no way to create an association with only the 32bit version. When I select open with` and I browse to the 32bit version and select open, it does not get added to the list of applications? Update: Unfortunately the problem just went away. It's annoying as the root cause is likely never to be found, I'm accepting Fopedush's answer for this "detailness".

    Read the article

  • Two screens hooked to one laptop

    - by mplacona
    Hi, I'm thinking of getting rid of my desktop, and using my (much better) laptop instead. I'm only wondering if I would be able to hook the two screens I have with it, so I'd end up with three screens. I've seen people doing it to desktops, but am not sure the same could be accomplished with a laptop. My laptop is a sony vaio, and it's got both a VGA output, and an HDMI output. It'd be great is I could simply hook two screens to it, and have three independent screens (not mirrored). on my desktop, I have pretty much the same thing, but with an extra DVI port. I connect the DVI to one screen, and the VGA to an older one. Trying to connect anything to the HDMI simply mirrors whatever is on the DVI (I've tried it a long time ago) So I was wondering if with the laptop I'd be able to do it, and end up with three independent screens. I don't know if there's anything else I could be using instead (i.e. any extra hardware), so recommendations are more than welcome. Thanks in advance, Marcos

    Read the article

  • Exceptional slowdown of robocopy copying from VM to DFS array

    - by user1588867
    I've got an old win 2003 VM (VMware) on a blade cluster of VMs that I'm moving a considerable amount of files to our new DFS array. There are two main folders with about 1.7 million and half a million smaller files (letters, memos, and other smaller files) respectively. Total size is ~420 GB and ~100 GB. We're using the gui version of robocopy on the server to copy the files. We had initiated a file copy about a month ago to test the process and found that it was taking around 4 hours for the large file. Now that I'm in the process of actually switching the files over it has been taking 18-20 hours. Nothing has changed on the server side and nothing has changed on the settings of the copy (no logs, 1 retry with a wait of 1 second). Our intent is to shut off the share and force the copy over again to get all the files that have been left out of the copy due to being locked by users. I can't take a 20 hour outage to do that though. Does anyone have any theories about what could be causing such a delay for robocopy compared to previously shorter runs?

    Read the article

  • How do I add permissions via command line for "everyone" on external HDD

    - by acidzombie24
    I have an external HDD and I kind of messed up the file permissions but when fixing it I thought it is ok bc with my username I can access the files perfectly fine. Now that I use this with two PC (actually ATM I don't have access to my other PC) I can't access these files. The problem is this directory has hundreds of folders with no permission for "everyone". I would like to give it the default permissions including have all access for the user "everyone". How do I do that via command line for these hundreds of folders?

    Read the article

  • DVI-D Splitter Not Working with GeForce 8400gs

    - by jimdrang
    I have a GeForce 8400gs and it has a DVI and VGA port on the back. I was using dual monitors with one VGA and one DVI cable. I wanted both displays to be digital so I bought a DVI-D splitter and put one DVI cable in each monitor, connected them to the splitter and put the single merged connection in the back of the cards DVI connection. It will not recognize the second monitor (I'm not even sure how it determined which one was the first monitor). The tech specs state that it supports "Two dual-link DVI outputs for digital flat panel display resolutions up to 2560x1600" http://www.nvidia.com/object/geforce_8400_tech_specs.html. Do I need a different converter or is my only option for dual monitors with this card one VGA, one DVI?

    Read the article

  • Robocopy for Windows 2003 doesn't support /DST option

    - by Jon
    Does anyone know if it is possible to download the latest robocopy for Windows 2003. The latest version provides the /DST option which ignores time stamps changed due to BST (British Summer Time). Every time we do a build and sync our servers when we go +1/-1 hour it takes hours instead of minutes because it sees everything as changed. I noticed it is included automatically with Vista/Win7 but the Resource toolkit that I downloaded doesn't include a new version of robocopy for Win Server 2003. If there is a place to download it from & will it also work on Windows Server 2003? Thanks.

    Read the article

< Previous Page | 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076  | Next Page >