Search Results

Search found 99017 results on 3961 pages for 'server side events'.

Page 1299/3961 | < Previous Page | 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306  | Next Page >

• Understanding Linux SCSI queue depths

  - by Troels Arvin

  I'm experimenting with the effects of different SCSI queue depth values on a Dell server running CentOS Linux 5.4 (x86_64). The server has two QLogic QLE2560 FC HBAs connected via multipathing to a storage system. The storage system has allocated two LUNs to the server, each connected through four paths in an active-active-active-active round-robin configuration. All in all, the two LUNs exist as eight /dev/sdX devices, represented by two devices in /dev/mpath. I currently adjust the queue depth values in /etc/modprobe.conf and check the result (after rebooting) by looking in the seventh column of /proc/scsi/sg/devices. Two questions related to that: Is there a way to adjust queue depths without rebooting or unloading the qla2xxx kernel module? E.g., can I echo a new queue depth value into some /proc or /sys-like file to update the queue depth? If I set the queue depth to 128, is that 128 in total for all devices handled by the qla2xxx module?, or 128 for each HBA? (256 in total), or 128 for each of the eight /dev/sdX devices (1024 in toal)?, or 128 for each of the two /dev/mpath/... devices (256 in total)? This is important for me to know so that my server doesn't flood the storage system, affecting other servers connected to it.

  Read the article

• Any Recommendations for a Web Based Large File Transfer System?

  - by Glen Richards

  I'm looking for a server software product that: Allows my users to share large files with: The general public securely to 1 or more people (notification via email, optionally with a token that gives them x period of time to download) Allows anyone in the general public to share files with my users. Perhaps by invitation. Has to be user friendly enough to allow my users to use this with out having to bug me as the admin. It needs to be a system that we can install on our own server (we don't want shared data sitting on anyone else's server) A web based solution. Using some kind or secure comms channel would be good too, eg, ssh Files to share could be over 1 GB. I found the question below. WebDav does not sound user friendly enough: http://serverfault.com/questions/86878/recommendations-for-a-secure-and-simple-dropbox-system I've done a lot of searching, but I can't get the search terms right. There are too many services that provide this, but I want something we can install on our own server. A last resort would be to roll my own. Any ideas appreciated. Glen EDIT Sorry Tom and Jeff but Glen specifically says that he's looking for a 'product' so given that I specialise in this field thought that my expertise in this area may have been of use to him. I don't see how him writing services is going to be easy for him to maintain going forward (large IT admin overhead) or simple for his users and the general public to work with.

  Read the article

• Nginx dynamic upstream configuration / routing

  - by Dan Sosedoff

  I was experimenting with dynamic upstream configuration for nginx and cant find any good solution to implement upstream configuration from third-party source like redis or mysql. The idea behind it is to have a single file configuration in primary server and proxy requests to various app servers based on environment conditions. Think of dynamic deployments where you have X servers that are running Y workers on different ports. For instance, i create a new app and deploy. App manager selects a server and then rolls out a worker (Ruby/PHP/Python) and then reports the ip:port to the central database with status "up". At this time when i go to the given url nginx should proxy all requests to the specified ip:port upstream. The whole thing is pretty similar to what heroku does, except this proof-of-concept is not supposed to be production ready, mostly for internal needs. The easiest solution i found was using resolver with ruby-based DNS server. It works, nginx gets the IP address correctly, but the only problem is that you cant define port number for that IP. Second solution (which i havent tried yet) is to roll something else as a proxy server, maybe written in Erlang. In this case we need to use something to serve static content. Any ideas how to implement this in more flexible and stable way? P.S. Some research options: http://openresty.org/#DynamicRoutingBasedOnRedis https://github.com/nodejitsu/node-http-proxy

  Read the article

• How to run some commands after booting from ArchLinux disk? Or how to change some settings in .iso before booting?

  - by Alexander Ovchinnikov

  How to install Arch Linux with traditional installer with only ssh-access to server? There is nice guide: https://wiki.archlinux.org/index.php/Install_from_SSH I try test this on my home vps: Start VPS with any linux bootable cd and login to remote server (vps) wget http://mirrors.kernel.org/archlinux/iso/latest/archlinux-2010.05-netinstall-x86_64.iso dd if=archlinux-2010.05-netinstall-x86_64.iso of=/dev/sda reboot ... I see, it works but without ssh connection... I need make script, which will send this commands after reboot: aif -p partial-configure-network (and write some information about my server ip etc.) /etc/rc.d/sshd start (need to start sshd) echo "sshd: ALL" /etc/hosts.allow (to allow me login to server, by default deny all) passwd (by default its empty, can't login via ssh with empty password) Can I edit .iso or may be /dev/sda? May be I need write script, which will start after system boot and do this things or may be I can set this settings by default and system will start with correct settings (i think its possible at least in 2. and 3.). Thank you!

  Read the article

• SSL certificates work fine from command line but fails in script

  - by jrallison

  I'm trying to setup email notifications for my continuous integration server. I have a script which uses nail to send the email when the build works: #!/bin/bash echo "Build Worked!" | nail -A myisp -s 'Build Success' [email protected] When I run this from the command line with sh build-worked, it works and I receive the email. However, when I start the continuous integration server which executes the same script, I get the following error: nail: /opt/bitnami/common/lib/libssl.so.0.9.8: no version information available (required by nail) nail: /opt/bitnami/common/lib/libcrypto.so.0.9.8: no version information available (required by nail) Error with certificate at depth: 0 issuer = /C=ZA/ST=Western Cape/L=Cape Town/O=Thawte Consulting cc/OU=Certification Services Division/CN=Thawte Premium Server CA/[email protected] subject = /C=US/ST=California/L=Mountain View/O=Google Inc/CN=smtp.gmail.com err 20: unable to get local issuer certificate Continue (y/n)? could not initiate SSL/TLS connection: error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed . . . message not sent. I must be messing some configuration, any ideas?

  Read the article

• Chunking large rsync transfers?

  - by Gabe Martin-Dempesy

  We use rsync to update a mirror of our primary file server to an off-site colocated backup server. One of the issues we currently have is that our file server has 1TB of mostly smaller files (in the 10-100kb range), and when we're transferring this much data, we often end up with the connection being dropped several hours into the transfer. Rsync doesn't have a resume/retry feature that simply reconnects to the server to pickup where it left off -- you need to go through the file comparison process, which ends up being very length with the amount of files we have. The solution that's recommended to get around is to split up your large rsync transfer into a series of smaller transfers. I've figured the best way to do this is by first letter of the top-level directory names, which doesn't give us a perfectly even distribution, but is good enough. I'd like to confirm if my methodology for doing this is sane, or if there's a more simple way to accomplish the goal. To do this, I iterate through A-Z, a-z, 0-9 to pick a one character $prefix. Initially I was thinking of just running rsync -av --delete --delete-excluded --exclude "*.mp3" "src/$prefix*" dest/ (--exclude "*.mp3" is just an example, as we have a more lengthy exclude list for removing things like temporary files) The problem with this is that any top-level directories in dest/ that are no longer present present on src will not get picked up by --delete. To get around this, I'm instead trying the following: rsync \ --filter 'S /$prefix*' \ --filter 'R /$prefix*' \ --filter 'H /*' \ --filter 'P /*' \ -av --delete --delete-excluded --exclude "*.mp3" src/ dest/ I'm using the show and hide over include and exclude, because otherwise the --delete-excluded will delete anything that doesn't match $prefix. Is this the most effective way of splitting the rsync into smaller chunks? Is there a more effective tool, or a flag that I've missed, that might make this more simple?

  Read the article

• Exchange 2007 restore - Backup Exec Unable to Attach to a resource

  - by Andy

  I have been struggling with this one for months! Grateful for any advice. The setup is a windows 2003 server network, 4xservers on the domain. Two exchange 2007 servers (only one with mailboxes still on). Backup Exec (12.5) on a non-exchange server with agents on the others. Backup exec runs a full backup of exchange across the network well, at pretty reasonable speeds. However, when you try any kind of restore (individual emails, mailboxes or whole system restore - all to same location or to alternate server, RSG etc) the following message is received within about 10-15 secs of starting the job: Job ended: 24 December 2010 at 13:28:32 Completed status: Failed Final error: 0xe000848c - Unable to attach to a resource. Make sure that all selected resources exist and are online, and then try again. If the server or resource no longer exists, remove it from the selection list. Edit the selection list properties, click the View Selection Details tab, and then remove the resource. Final error category: Resource Errors For additional information regarding this error refer to link V-79-57344-33932 Things I have already tried: Changed account to main administrator account (with all permissions) checked versions of ese.dll on both servers - both the same Checked all VSS writers on both servers are stable / normal restoring to different locations Any advice anyone could give would be much appreciated. Many thanks, Andy

  Read the article

• best practice to removing DC from Site that no longer connects via vpn in another city

  - by dasko

  hi i am looking for a recap of what i have done already to see if i missed anything. i had two cities connected by wan using a ipsec persistent tunnel between gateways. i had one DC (DOMAIN CONTROLLER) in each city that was a global catalog server (GC) they were set up to replicate and i had them configured under Sites and Servers with their own subnet etc... about 6 months ago the one city was removed and i was not able to gracefully remove, through dcpromo, the server that was there. it is no longer used and cannot be brought back. the company went from two sites down to single site. Problem is i had a whole bunch of kcc errors and replication bugs in the event viewer. i wanted to clean up my active directory and decided to use the ntdsutil metadata cleanup commands. i removed the server from the specifed site based on a procedure from petri website. I then removed the instances of the old DC and site from Sites and Servers. Then i went and cleaned up the DNS by removing Host A records, NS server name from both the local DNS forward lookup zone and the _msdcs i also removed the reverse lookup zone for the subnet that no longer exists. is there anything i missed? thanks in advance for any help. gd

  Read the article

• How to generate customized sudoers files in puppet depending on the environment they're deployed to?

  - by gozu

  the sysadmins are present in the sudoers files of all environments, but other sudoers are not. Different environments all have slightly different sudoers. Most of the time, 90% of users are the same, and 10% vary so we cannot have only one sudoers file for everything. Right now, we are using puppet with 10 different files with names like sudoers.production1, sudoers.production2, sudoers.production3, sudoers.testing1, sudoers.staging1 and so forth. Puppet then picks the file to deploy based on the server's $domain (ex: dbserver.staging1.acme.com) or $hardwaremodel. It works fine but it's a nightmare to maintain so many files. I'd like to autogenerate sudoers files based on the server's domain and have only one big file with all the sudoers permissions for all users and all environments. Something that looks like: User_Alias ADMINS = abe, bob, carol, dave case $domain { "staging1.acme.com" { #add dev1,dev2,tester1,tester2 to sudoers file } "testing2.acme.com" { #add tester1, tester3, tester4 to sudoers file } What's the best way to go about this? Suggestions for alternatives are welcome. I'd appreciate any tips. Update 1: For security reasons, we'd rather not concatenate a bunch of files from a folder located on a puppet client in case someone puts a file in there (maliciously or not) and either breaks the combined file or inserts something in it. Most importantly, for usability, we'd like to keep the number of sudoers related files (fragment or complete) on puppet server to either 3 (prod/stage/test) or preferably 1 file. this file would (somehow) generate sudoers files on the puppet server and send one customized file to each puppet client. The purpose of this would be only searching for a username in a single file and removing it quicker than doing it on 11 files. When adding a user to a bunch of environments, it won't be as quick, but only one file would need to be opened and looked at, greatly reducing the chances of an omission. our Sudo version is 1.6.9p8 so we can't use /sudoers.d folder, only a sudoers file.

  Read the article

• MAMP - Host name changes to first vhost SSL entry for project with two localhosts

  - by user1322092

  I have two projects that are a copy of each other on my Mac with MAMP. They both have SSL pages. However, whenever I hit the a secured SSL page of project 2, the base_url or host changes to project1 instead of remaining project2. I know this is an issue with the vhosts, because if I switch the order of the entries, the reverse happens. Here's my config files: /Applications/MAMP/conf/extra/httpd-ssl.conf <VirtualHost _default_:443> DocumentRoot "/Applications/MAMP/htdocs/proj1" ServerName proj1.localhost:443 ErrorLog "/Applications/MAMP/Library/logs/error_log" TransferLog "/Applications/MAMP/Library/logs/access_log" SSLEngine on SSLCertificateFile "/Applications/MAMP/conf/apache/ssl/server.crt" SSLCertificateKeyFile "/Applications/MAMP/conf/apache/ssl/server.key" </VirtualHost> <VirtualHost _default_:443> DocumentRoot "/Applications/MAMP/htdocs/proj2" ServerName proj2.localhost:443 ErrorLog "/Applications/MAMP/Library/logs/error_log" TransferLog "/Applications/MAMP/Library/logs/access_log" SSLEngine on SSLCertificateFile "/Applications/MAMP/conf/apache/ssl/server.crt" SSLCertificateKeyFile "/Applications/MAMP/conf/apache/ssl/server.key" </VirtualHost> -------------------- cat /etc/hosts ## # Host Database # # localhost is used to configure the loopback interface # when the system is booting. Do not change this entry. ## 127.0.0.1 localhost 255.255.255.255 broadcasthost ::1 localhost fe80::1%lo0 localhost 127.0.0.1 proj1.localhost 127.0.0.1 proj2.localhost

  Read the article

• Setting up multiple servers for one domain

  - by Joseph Torraca

  So I am starting up a new website and I was wondering how to set up 5 servers to host the site. I have already purchased 5 Apple XServes, one will be used as a test server and the other 4 will be for the live site. So I have read some website on the internet and they all reference using one server and installing software onto it and have that server do the load balancing. I have also read that you could use a hardware, rack-mounted system and plug the servers into that. The load balancer would then distribute the load. So I have a few questions about each: 1) How do you set up the software version and have the other servers as "slaves" and have one "master" to direct traffic? 2) Which of the two options above are more reliable, and better suited for a startup that doesn't have many users per month, yet(hopefully)? 3) Is there a theoretical max limit of servers that can be connected to a software load balancing system? Note: Obviously this will change from software to software, but in terms of the server being able to handle it? 4) In your own opinion, what are you using for your sites? Have you had any problems setting up that system or operating it once its running? Are there any things you would stay away from if you had to start over? 5) I also purchased a Apple RAID system, so if you are familiar with it, is there any way to connect it to multiple Xserves so they all serve the same data? I'm a little confused on this, so thanks for all your help and being patient with me. Note: Take it easy on me, I am learning this as I go along, so I may have used terms incorrectly or explained things that don't really make sense. Sorry. P.S. If you need me to supply the specs on the servers to determine which system makes the most sense, I can post them for you.

  Read the article

• Recommended setting for using Apache mod_mono with a different user

  - by Korrupzion

  Hello, I'm setting up an ASP.net script in my linux machine using mod_mono. The script spawn procceses of a bin that belongs to another user, but the proccess is spawned by www-data because apache runs with that user, and i need to spawn the proccess with the user that owns the file. I tried setuid bit but it doesn't make any effect. I discovered that if I kill mod-mono-server2.exe and I run it with the user that I need, everything works right, but I want to know the proper way to do this, because after a while apache runs mod-mono-server2.exe as www-data again. Mono-Project webpage says: How can I Run mod-mono-server as a different user? Due to apache's design, there is no straightforward way to start processes from inside of a apache child as a specific user. Apache's SuExec wrapper is targeting CGI and is useless for modules. Mod_mono provides the MonoStartXSP option. You can set it to "False" and start mod-mono-server manually as the specific user. Some tinkering with the Unix socket's permissions might be necessary, unless MonoListenPort is used, which turns on TCP between mod_mono and mod-mono-server. Another (very risky) way: use a setuid 'root' wrapper for the mono executable, inspired by the sources of Apache's SuExec. I want to know how to use the setuid wrapper, because I tried adding the setuid to 'mono' bin and changing the owner to the user that I want, but that made mono crash. Or maybe a way to keep running mono-mod-server2.exe separated from apache without being closed (anyone has a script?) My environment: Debian Lenny 2.6.26-2-amd64 Mono 1.9.1 mod_mono from debian repository Dedicated server (root access and stuff) Using apache vhosts -I use mono for only that script Thanks!

  Read the article

• OpenVPN via DD-WRT

  - by user140491

  I am using DD-WRT with my Buffalo G300NH. I notice in my log files: Wed Oct 10 01:08:25 2012 us=343000 Cannot open /tmp/openvpn/dh.pem for DH parameters: error:02001003:system library:fopen:No such process: error:2006D080:BIO routines:BIO_new_file:no such file I have looked at other answers regarding this error. I have tried to no avail. 755 are chmod rights to /tmp/openvpn. At this point, I can not connect outside my LAN via OpenVPN. My server config looks like this: #mode server #tls-server push "route 192.168.11.1 255.255.255.0" push "dhcp-option DNS 10.8.0.1" server 10.8.0.0 255.255.255.0 port 1194 proto udp dev tun0 ifconfig 10.8.0.1 10.8.0.2 #secret /tmp/static.key ca /tmp/openvpn/ca.crt cert /tmp/openvpn/cert.pem key /tmp/openvpn/key.pem dh /tmp/openvpn/dh.pem keepalive 10 120 comp-lzo persist-key persist-tun verb 5 management localhost 5001 Can someone, knowledgeable, of this error kindly help? i have been going on several days, trying to sort it out. I like all nighters though!!

  Read the article

• Network cabling with multiple patch panels?

  - by dannymcc

  I am in the very early stages of planning a network cabling upgrade in our office, mainly to upgrade the old cables from Cat5 to either 5e or 6. I am also planning on upgrading all of our 10/100 switches to 10/100/1000 switches. I would like to have three small wall mounted cabinets spread around the building, each with a patch panel and switch. These would all lead back to our server room. The question is; should I have two patch panels in each wall cabinet, one with 24 or 48 ports that are connected to a matching patch panel in the server room. The second patch panel would then link to each device in that cabinets area. Then I wouldn't put a switch in the small cabinets. All switching would be done in the server room. Or, should I have one main cable from the server room to each of the cabinets - plugged straight into the switch and the patch panel is for devices in the cabinets area? I hope that makes sense!

  Read the article

• Apache, Tomcat 5 and problem with HTTP basic auth

  - by Juha Syrjälä

  I have setup a Tomcat with a webapp that uses http basic auth in some of its URLs. There is a Apache server in front of the Tomcat. I have setup Apache as a proxy like this (all traffic should go directly to tomcat): /etc/httpd/conf.d/proxy_ajp.conf: LoadModule proxy_ajp_module modules/mod_proxy_ajp.so ProxyPass / ajp://localhost:8009/ ProxyPassReverse / ajp://localhost:8009/ There is a webapp installed to root of Tomcat (ROOT.war), so I should be able to use http://localhost/ to access my webapp. But it is not working with http basic auth. The problem is that everything works until I try to access URL that are protected by the HTTP basic auth. URLs without authentication work just fine. When accessing this url via apache I am getting an error message from Apache. If I access the same URL directly from tomcat, everything works just fine. I am getting this to Apache error log: [Wed Sep 01 21:34:01 2010] [error] proxy: dialog to [::1]:8009 (localhost) failed access log looks like this: ::1 - - [01/Sep/2010:21:34:01 +0300] "GET /protected_path/ HTTP/1.0" 503 360 "-" "w3m/0.5.2" I am using: Fedora release 13 (Goddard) httpd-2.2.16-1.fc13.x86_64 tomcat5-5.5.27-7.4.fc12.noarch The basic auth is implemented in the webapp (not in Apache or Tomcat). The webapp is actually implemented in Scala/Lift, but that shouldn't matter. The auth works if I access the tomcat directly. Error message that I am getting from Apache. It is curious that the title is Unauthorized and not Internal error: Unauthorized The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later. Apache/2.2.16 (Fedora) Server at my.server.name.com Port 80 It could be that Apache is seeing a some thing else than 200 OK response and thinks that it is an error when it actually should pass the received 401 Unauthorized response directly to browser. If this is the problem, how to fix it?

  Read the article

• haproxy and tomcat intermittent hangs

  - by user7347

  I am trying to run haproxy in front of tomcat on a Solaris x86 box, but I am getting intermittent failures. At seemingly random intervals, the request just hangs until haproxy times out the connection. I thought maybe it was my app, but I've been able to reproduce it with the tomcat manager app, and hitting tomcat directly there is no problems at all. Hitting it repeatedly with curl will cause the error within 10-15 tries curl -ikL http://admin:admin@<my server>:81/manager/status haproxy is running on port 81, tomcat on port 7000. haproxy returns a 504 gateway timeout to the client, and puts this into the log file: Sep 7 21:39:53 localhost haproxy[16887]: xxx.xxx.xxx.xxx:65168 [07/Sep/2009:21:39:23.005] http_proxy http_proxy/tomcat7000 5/0/0/-1/30014 504 194 - - sHNN 0/0/0/0/0 0/0 "GET /manager/status HTTP/1.1" Tomcat shows nothing, no error in the logs and no indication that the request ever makes it to the tomcat server. The request count is not incremented, the manager app only shows activity on one thread, serving up the manager app. Here are my haproxy and tomcat connector settings, I've been playing with both a good deal trying to chase down the issue, so they may not be ideal, but they definitely don't seem like they should cause this error. server.xml <Connector port="7000" protocol="HTTP/1.1" enableLookups="false" maxKeepAliveRequests="1" connectionLinger="10" /> haproxy config global log loghost local0 chroot /var/haproxy listen http_proxy :81 mode http log global option httplog option httpclose clitimeout 150000 srvtimeout 30000 contimeout 3000 balance roundrobin cookie SERVERID insert server tomcat7000 127.0.0.1:7000 cookie server00 check inter 2000

  Read the article

• Exim rejects recipient address on my domain

  - by Nicolas

  Hi, I have a dedicated server (debian) on which I have installed Exim and Dovecot. Everything worked fine until around a month ago. I tried to reinstall and reconfigure exim but I keep having all the incoming emails rejected. Outlook says: A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed: [email protected] SMTP error from remote mail server after RCPT TO:: host mail.mydomain.com [94.76.##.##]: 550 relay not permitted GMAIL: Delivery to the following recipient failed permanently: [email protected] Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 550 550 relay not permitted (state 14). On the server side, my rejectlog file shows: 2011-01-04 17:09:21 H=mail-qw0-f53.google.com [209.85.216.53] F=<####@gmail.com rejected RCPT : relay not permitted ... and the mainlog file: 2011-01-04 17:00:01 1PaAEr-0007vN-DX <= root@ETC_MAILNAME U=root P=local S=869 2011-01-04 17:00:01 1PaAEr-0007vN-DX ** root@etc_mailname: Unrouteable address 2011-01-04 17:00:01 1PaAEr-0007vY-Kn Error while reading message with no usable sender address (R=1PaAEr-0007vN-DX): at least one malformed recipient address: root@ETC_MAILNAME - malformed address: _MAILNAME may not follow root@ETC 2011-01-04 17:00:01 1PaAEr-0007vN-DX Process failed (1) when writing error message to root@ETC_MAILNAME (frozen) 2011-01-04 17:09:21 no IP address found for host MAIN_RELAY_NETS (during SMTP connection from mail-qw0-f53.google.com [209.85.216.53]) 2011-01-04 17:09:21 H=mail-qw0-f53.google.com [209.85.216.53] F=<####@gmail.com rejected RCPT : relay not permitted then after the message becomes frozen: 2011-01-04 17:28:44 1PaAEr-0007vN-DX Message is frozen Thank you for your help, any idea/comment is welcomed as I am really running out of idea to fix this issue, Nicolas. Oh and the PHP mail() function does not do anything as well, would it be linked to? I think mail() uses sendmail from my php.ini.

  Read the article

• Can't successfully run Sharepoint Foundation 2010 first time configuration

  - by Robert Koritnik

  I'm trying to run the non-GUI version of configuration wizard using power shell because I would like to set config and admin database names. GUI wizard doesn't give you all possible options for configuration (but even though it doesn't do it either). I run this command: New-SPConfigurationDatabase -DatabaseName "Sharepoint2010Config" -DatabaseServer "developer.mydomain.pri" -AdministrationContentDatabaseName "Sharepoint2010Admin" -DatabaseCredentials (Get-Credential) -Passphrase (ConvertTo-SecureString "%h4r3p0int" -AsPlainText -Force) Of course all these are in the same line. I've broken them down into separate lines to make it easier to read. When I run this command I get this error: New-SPConfigurationDatabase : Cannot connect to database master at SQL server a t developer.mydomain.pri. The database might not exist, or the current user does not have permission to connect to it. At line:1 char:28 + New-SPConfigurationDatabase <<<< -DatabaseName "Sharepoint2010Config" -Datab aseServer "developer.mydomain.pri" -AdministrationContentDatabaseName "Sharepoint 2010Admin" -DatabaseCredentials (Get-Credential) -Passphrase (ConvertTo-SecureS tring "%h4r3p0int" -AsPlainText -Force) + CategoryInfo : InvalidData: (Microsoft.Share...urationDatabase: SPCmdletNewSPConfigurationDatabase) [New-SPConfigurationDatabase], SPExcep tion + FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletNewSPCon figurationDatabase I created two domain accounts and haven't added them to any group: SPF_DATABASE - database account SPF_ADMIN - farm account I'm running powershell console as domain administrator. I've tried to run SQL Management studio as domain admin and created a dummy database and it worked without a problem. I'm running: Windows 7 x64 on the machine where Sharepoint Foundation 2010 should be installed and also has preinstalled SQL Server 2008 R2 database Windows Server 2008 R2 Server Core is my domain controller that just serves domain features and nothing else I've installed Sharepoint according to MS guides http://msdn.microsoft.com/en-us/library/ee554869%28office.14%29.aspx installing all additional patches that are related to my configuration. Any ideas what should I do to make it work?

  Read the article

• Web Deploy 3.0 Installation Fails

  - by jkarpilo

  I am having difficulty installing Microsoft Web Deploy 3.0 to a Windows Server 2008 R2 box. I have tried installing with both the Web Platform Installer and the MSI package but installation fails while trying to execute the MSI custom action ExecuteRegisterUIModuleCA. This server is a VM and a member of a farm but shared config is disabled while I'm installing. Here's the point at which it fails in the MSI log (starting at line 1875): MSI (s) (80:FC) [15:29:01:358]: Executing op: ActionStart(Name=IISBeginTransactionCA,,) MSI (s) (80:FC) [15:29:01:374]: Executing op: CustomActionSchedule(Action=IISBeginTransactionCA,ActionType=3073,Source=BinaryData,Target=IISBeginTransactionCA,) MSI (s) (80:A8) [15:29:01:374]: Invoking remote custom action. DLL: C:\Windows\Installer\MSI6C6A.tmp, Entrypoint: IISBeginTransactionCA MSI (s) (80:FC) [15:29:01:436]: Executing op: ActionStart(Name=IISRollbackTransactionCA,,) MSI (s) (80:FC) [15:29:01:436]: Executing op: CustomActionSchedule(Action=IISRollbackTransactionCA,ActionType=3329,Source=BinaryData,Target=IISRollbackTransactionCA,) MSI (s) (80:FC) [15:29:01:436]: Executing op: ActionStart(Name=IISCommitTransactionCA,,) MSI (s) (80:FC) [15:29:01:436]: Executing op: CustomActionSchedule(Action=IISCommitTransactionCA,ActionType=3585,Source=BinaryData,Target=IISCommitTransactionCA,) MSI (s) (80:FC) [15:29:01:436]: Executing op: ActionStart(Name=IISExecuteCA,,) MSI (s) (80:FC) [15:29:01:452]: Executing op: CustomActionSchedule(Action=IISExecuteCA,ActionType=3073,Source=BinaryData,Target=IISExecuteCA,CustomActionData=1^3^21^WebDeployment_Current^154^Microsoft.Web.Deployment.UI.PackagingModuleProvider, Microsoft.Web.Deployment.UI.Server, Version=9.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35^1^1^0^^1^3^28^DelegationManagement_Current^171^Microsoft.Web.Management.Delegation.DelegationModuleProvider, Microsoft.Web.Management.Delegation.Server, Version=9.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35^1^1^0^^1^7^38^system.webServer/management/delegation^4^Deny^16^MachineToWebRoot^0^^3^yes^1^7^31^system.webServer/wdeploy/backup^4^Deny^20^MachineToApplication^0^^2^no^) MSI (s) (80:84) [15:29:01:452]: Invoking remote custom action. DLL: C:\Windows\Installer\MSI6CB9.tmp, Entrypoint: IISExecuteCA 1: IISCA IISExecuteCA : Begin CA Setup 1: IISCA IISExecuteCA : CA 'ExecuteRegisterUIModuleCA' completed with return code hr=0x8007000d 1: IISCA IISExecuteCA : CA 'IISExecuteCA' completed with return code hr=0x8007000d 1: IISCA IISExecuteCA : End CA Setup CustomAction IISExecuteCA returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox) Action ended 15:29:05: InstallFinalize. Return value 3. I can't seem to find any information regarding this particular issue; can someone help point me in the right direction?

  Read the article

• How do I effectively use WinSCP on my GoDaddy Dedicated Hosting

  - by Scott

  After being told that Virtual Private Servers would not fit the scope of my project, I have timidly entered the world of dedicated hosting. Unfortunately, this is forcing me how to learn the basics of being a Linux server admin. GoDaddy has a master account for the server. When you use SSH, they want you to use "su" to switch to the root user. Thus far, I have been able to do everything I have needed to thus far via the command line as this root user. However, now I need to upload files to my server. I'm used to using WinSCP to upload files. I can use my general server account to view the files but when I try to drag or create files its says that I cannot because I do not have permission to do so. I have researched the WinSCP documentation and it seems that this "su" function is beyond the scope of the program. How am I to grant myself access to upload these files using SSH? Should I create a user with the proper permissions? I'm happy to do this but thus far I have not been able to make sense of what I have found online. I'm going to try and move forward but any help and/or insight is appreciated.

  Read the article

• Online Storage and security concerns

  - by Megge

  I plan to set up a small fileserver. I already own a small server at HostEurope (VirtualServer L, 250GB space), but they don't offer enough space (there is the HostEurope Cloud, but paying for bandwidth isn't an option here, video-streaming should be possible) Requirements summarized: Storage: 2TB, Users: ~15, Filesizes: < 100GB, should be easily reachable (Mount as a networkdrive or at least have solid "communication" software) My first question would be: Where can I get halfway affordable online storages? And how should I connect them to my server? Getting an additional server is a bit overkill, as I know no hoster which allows 2 TB on a small 2 Ghz Dual Core 2 GB RAM thingy (that would be enough by far, I just need much space), and connecting it via NFS or FTP over Internet seems a bit strange and cripples performance. Do you have any advice where I could get that storage service from? (I sent HostEurope a custom request today, but they didn't answer till now. If they can provide me with that space, this question will be irrelevant, but the 2nd one is the more important one anway, don't do much more than recommend me some based on experience, you don't have to crawl hours through hosting services) livedrive for example offers 5 TB for 17€ / month, I'd be happy with 2 TB for 20 €, the caveat is: It doesn't allow multiple users, which leads me to my second question: Where are the security problems? Which protocol is sufficient (I want private and "public" folders etc. the usual "every user has its own and a public space"-thing), secure and fast? (I'd tend to (S)FTP, problem with FTP is: Most of those hosting services don't even allow FTP with mutliple users and single users lead me into "hacking" a solution (you could map the basic folder structure on the main server and just mount every subfolder from the storage, things get difficult with a public folder with 644 permissions though) Is useing something like PKI or 802.1X overkill for private uses?

  Read the article

• Sshfs is not working..

  - by Devrim

  Hi, When I run sshpass -p 'mypass' sshfs 'root'@'68.19.40.16':/ '/dir' -o StrictHostKeyChecking=no,debug It successfully mounts but it runs on foreground. When I run without 'debug' parameter, it doesn't mount at all. Server is ubuntu 8.04 Any ideas why? UPDATE: When I run the command as ROOT it does mount. It doesn't work with other users. here is the output of an unsuccessful mount $ sshpass -p 'pass' sshfs 'root'@'68.1.1.1':/ '/s6' -o StrictHostKeyChecking=no,sshfs_debug,loglevel=debug debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to 68.1.1.1 [68.1.1.1] port 22. debug1: Connection established. debug1: identity file /var/www/vhosts/devrim.kodingen.com/.ssh/id_rsa type -1 debug1: identity file /var/www/vhosts/devrim.kodingen.com/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.1p1 Debian-5 debug1: match: OpenSSH_5.1p1 Debian-5 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_4.7p1 Debian-8ubuntu1.2 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-cbc hmac-md5 none debug1: kex: client->server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY Warning: Permanently added '68.1.1.1' (RSA) to the list of known hosts. debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Trying private key: /var/www/vhosts/devrim.kodingen.com/.ssh/id_rsa debug1: Trying private key: /var/www/vhosts/devrim.kodingen.com/.ssh/id_dsa debug1: Next authentication method: password debug1: Authentication succeeded (password). debug1: channel 0: new [client-session] debug1: Entering interactive session. debug1: Sending environment. debug1: Sending env LANG = en_GB.UTF-8 debug1: Sending subsystem: sftp Server version: 3 debug1: channel 0: free: client-session, nchannels 1 debug1: fd 0 clearing O_NONBLOCK debug1: Killed by signal 1.

  Read the article

• SSL on local sub-domain and sub-sub-domain

  - by Eduard Luca

  I have both local.domain.com and lmarket.local.domain.com pointing to my localhost from etc/hosts. The problem is that I am using XAMPP on Windows 7, and have 2 SSL VirtualHosts in my apache config, but no matter which one I access, I am taken to local.domain.com. On non-HTTPS requests all works fine, and the vhosts are basically the same. Here is the relevant part of my vhosts: <VirtualHost local.domain.com:443> DocumentRoot "C:/xampp/htdocs/local" ServerName local.domain.com ServerAdmin webmaster@localhost ErrorLog "logs/error.log" <IfModule log_config_module> CustomLog "logs/access.log" combined </IfModule> SSLEngine on SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL SSLCertificateFile "conf/ssl.crt/server.crt" SSLCertificateKeyFile "conf/ssl.key/server.key" <FilesMatch "\.(cgi|shtml|pl|asp|php)$"> SSLOptions +StdEnvVars </FilesMatch> <Directory "C:/xampp/cgi-bin"> SSLOptions +StdEnvVars </Directory> BrowserMatch ".*MSIE.*" nokeepalive ssl-unclean-shutdown downgrade-1.0 force-response-1.0 CustomLog "logs/ssl_request.log" "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b" </VirtualHost> <VirtualHost lmarket.local.domain.com:443> DocumentRoot "C:/xampp/htdocs/lmarket.local" ServerName lmarket.local.domain.com ServerAdmin webmaster@localhost ErrorLog "logs/error.log" <IfModule log_config_module> CustomLog "logs/access.log" combined </IfModule> SSLEngine on SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL SSLCertificateFile "conf/ssl.crt/server.crt" SSLCertificateKeyFile "conf/ssl.key/server.key" <FilesMatch "\.(cgi|shtml|pl|asp|php)$"> SSLOptions +StdEnvVars </FilesMatch> <Directory "C:/xampp/cgi-bin"> SSLOptions +StdEnvVars </Directory> BrowserMatch ".*MSIE.*" nokeepalive ssl-unclean-shutdown downgrade-1.0 force-response-1.0 CustomLog "logs/ssl_request.log" "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b" </VirtualHost> If I invert these blocks, then the opposite happens: local.domain.com goes to lmarket.local.domain.com. Any help would be appreciated.

  Read the article

• Poor NFS Performance: OpenFiler

  - by Safin09

  Good Day Everyone, I have an issue with OpenFiler, a Linux-based operating that converts a computer system into a SAN/NAS appliance. Here is the problem. In my environment we have two Netapp Storevault 500 appliances that I normally perform backups to a NFS share. There are two backup cronjobs that use ghettoVCB to backup two groups of VM's. One group is a pool of 3 VMs. This takes 13 mins to complete. A second job that backups a pool of 5 VMs to a 2nd Storevault appliance which takes 2 hours. We then installed Openfiler on a old server that has 2 core Xeon processors. There is a software RAID 5 process in place. When performing the same backups to a NFS Openfiler share, the first backup job, which takes 13 mins, takes around 4 hours. The second backup job, which takes 2 hours, takes almost 10 hours to complete. This is unacceptable!!!! Especially considering the strain placed on the host ESX Server. I assumed that because of the software RAID 5, the overhead on the CPU explained the long backup times. I then installed Openfiler on a 2nd server, an IBM x306 machine which has a P4 Intel processor. This time no software RAID or any RAID at all. A single 750GB hard drive that contained the OS and the rest of the disk uses to backup VMs to a NFS share. I performed the first backup job of the pool of 3 VMs. This time the backup job took 1 and 1/2 hours to complete instead of 13 mins!!!!!!!!!! Is Openfiler simply poor at being an NFS Server!!!!!!!!!!!!! Has anyone else had these issues with Openfiler?

  Read the article

• How to fix a Postfix/MySQL/Dovecot Unknown Host Issue?

  - by thiesdiggity

  I am having an issue with one of my Postfix/Dovecot mail servers and I'm unsure how to fix the problem. I will try to explain it in detail, here it goes: I have an Ubuntu server setup using Virtual hosting with Postfix, Dovecot and MySQL. We have one domain setup as a virtual domain, for this example I am going to use mail.example.com. Under that domain we have one email address. I have another server (MS Exchange) setup using another one of my sub-domains, ex.example.com. The problem is that when I SMTP into the account on mail.example.com and try to send an email to an account on ex.example.com, I get the email returned back to us with an "unknown host" error. Now, I know that the mail.example.com server can resolve the ex.example.com domain because I can ping/dig while SSH'd into it. I can also log into Postfix via Telnet and send an email to an ex.example.com mailbox. I'm guessing that it has something to do with Postfix/Dovecot looking locally for the domain in the virtual domain list because of the tld domain (example.com)? If that's the case, how do I get Postfix/Dovecot to only look locally for the entire URL (mail.example.com) and if it doesn't find it, send it to the correct server by looking up the MX/A records (which I know exist and are setup correctly)? I have been working on this all day and any guidance would be GREATLY appreciated! Thanks for your time!

  Read the article

< Previous Page | 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306  | Next Page >