Search Results

Search found 4482 results on 180 pages for 'mr bash'.

Page 147/180 | < Previous Page | 143 144 145 146 147 148 149 150 151 152 153 154  | Next Page >

• DIsable my nv video card driver in linux

  - by Dahaka Wang

  I'm trying to passthrough my nv video card to my domU, but I could not bind my video card to the pciback driver I only have one video card with the pci number 0000:03:00.0, so I used the following command echo -n "0000:03:00.0" > /sys/bus/pci/drivers/nouveau/bind to unbind the nouveau driver from my video card. The screen went black because I have forcefully removed the video driver, therefore I ssh'd into the computer to run further commands I ran: echo -n "0000:03:00.0" > /sys/bus/pci/drivers/pciback/bind to try to bind it to my pciback driver, but I got: bash: echo: write error: No such device I found out that this was the message shown when trying to bind a PCI device which is already bound. Therefore, I think that something was still using my video card Can anyone help me out? Thanks a lot!

  Read the article

• Automating the installation using SSH

  - by RAY

  I am running a bash script from a remote host to run a binary file which installs 64 bit JDK 6 update 29 on multiple VMs across the Environment. It is installing the file but, at the last line i have to hit a enter to complete the installation. I want to fully automate the script where i do not have to hit the enter at the last line. This is what i am using ssh ${V_TIERS}@${V_TIERS} 'cd JDK; sh jdk-6u29-solaris-sparcv9.sh' It updates as desired, but during install i have to hit enter to continue and complete the installation. Can anybody please help to fully automate the update process.

  Read the article

• I screwed up, exit in .bashrc

  - by camel_space

  I put "exit" in my .bashrc file. I don't have physical access to the machine so to connect to it I use ssh. I don't have root privileges. Every time I connect to the server, the connection automatically closes. So far, I've tried: Overwriting .bashrc with scp and sftp. The connection closes before I can do anything. Using a few different GUI programs to access ssh (connection closes) Overwriting the file with ftp. (can't use ftp) From my home computer $ ssh host "bash --noprofile --norc" (connection closes) $ ssh host "mv .bashrc bashrc_temp" (connection closes) $ ssh host "rm .bashrc" (same thing) $ ssh host -t (connection closes) Is there anything I can do to disable .bashrc or maybe overwrite the file before .bashrc is sourced?

  Read the article

• Batch converting video from avc1 to xvid

  - by Tommy Brunn

  I need a way to batch convert 720p video files from avc1 to xvid in Ubuntu 10.04. I'm not terribly concerned about file size, but I do wish to retain the picture quality as much as possible. I believe the audio is encoded as aac, which is fine for my purposes. What would be the best and easiest way to do this? I've tried using Handbrake. During my first attempt, I had it using ffmpeg to convert to MPEG-4, but that just gave me a super-low quality video at twice the file size. Trying h.264 now, so we'll see how that works out. But just in case it doesn't pan out so well, what other ways do you recommend? I was thinking I'd write a bash script to reencode the files one by one, but the problem is that I have very little knowledge about codecs and containers and whatnot - so I wouldn't know what parameters I would pass ffmpeg/mencoder.

  Read the article

• Log with iptalbes which user is delivering email to port 25

  - by Maus

  Because we got blacklisted on CBL I set up the following firewall rules with iptables: #!/bin/bash iptables -A OUTPUT -d 127.0.0.1 -p tcp -m tcp --dport 25 -j ACCEPT iptables -A OUTPUT -p tcp -m tcp --dport 25 -m owner --gid-owner mail -j ACCEPT iptables -A OUTPUT -p tcp -m tcp --dport 25 -m owner --uid-owner root -j ACCEPT iptables -A OUTPUT -p tcp -m tcp --dport 25 -m owner --uid-owner Debian-exim -j ACCEPT iptables -A OUTPUT -p tcp -m limit --limit 15/minute -m tcp --dport 25 -j LOG --log-prefix "LOCAL_DROPPED_SPAM" iptables -A OUTPUT -p tcp -m tcp --dport 25 -j REJECT --reject-with icmp-port-unreachable I'm not able to connect to port 25 from localhost with another user than root or a mail group member - So it seems to work. Still some questions remain: How effective do you rate this rule-set to prevent spam coming from bad PHP-Scripts hosted on the server? Is there a way to block port 25 and 587 within the same statement? Is the usage of /usr/sbin/sendmail also limited or blocked by this rule-set? Is there a way to log the username of all other attempts which try to deliver stuff to port 25?

  Read the article

• PATH env variable on Mac OS X and/or Eclipse

  - by Jason S

  When I print out the path in bash, it prints this: /usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin When I run System.out.println(System.getenv("PATH")); in Java running under Eclipse, it prints /usr/bin:/bin:/usr/sbin:/sbin How can I figure out why there is this discrepancy? I need to add /usr/local/bin to the PATH and make it available to Java apps under Eclipse. (note: I have made no modifications system paths, so these are the defaults set by the OS or perhaps by one or more of the applications i've installed.)

  Read the article

• How to setup IP alias on bridged interface in Ubuntu

  - by Anonymouslemming

  How do I setup an IP alias on a bridge (br0) device on Ubuntu ? If I wait for br0 to come up and then do /sbin/ifconfig br0:0 192.168.10.1 netmask 255.255.255.0 then it works fine. If however I add the following to my /etc/network/interfaces file, it does not work and the network fails to start: auto br0:0 iface br0:0 inet static address 192.168.10.1 netmask 255.255.255.0 At the moment, I have a script in /etc/network/if-up.d/bridge_alias that does this as follows: #!/bin/bash if [ "${LOGICAL}" == "br0" ] && [ "${PHASE}" = "post-up" ]; then echo -n "Starting br0:0 ... " /sbin/ifconfig br0:0 192.168.10.2 netmask 255.255.255.0 echo "Done!" fi What is the right way of doing this though, just using the OS network config files ?

  Read the article

• How can I remap control+e to escape+control+e in iTerm2?

  - by cwd

  I have set up a few custom keyboard shortcuts in iTerm2 to easily move the cursor around with the arrow keys, but now I'd like to remap control+e to be escape, control+e because bash 4.2 no longer auto-expands variables using the tab key. I know I've done the first part correctly in choosing the keyboard shortcut to remap, but I don't understand how to look up the correct escape sequence (or hex codes) to send in the bottom section: I reference they keyboard codes but that wasn't much help. How can I remap this, and how can I look up the codes in the future? (No luck with Google) Update @db - thanks. To save others trouble I also found a cool util Key Codes.app which can be used to find key codes:

  Read the article

• How to harden windows 2003 service account

  - by ITMan

  I remember there was a tech-net or WindowsITpro article about how to harden windows 2003 service accounts a couple of years ago. For backup software purposes (such as BackupExec / AppAsure / Etc.. , please don't bash these) I have to create a domain admin account (usually called something such as "backup") and have the services run from that account. In this article I remember you can create the domain admin user "Backup" however have it not able to login interactively. Do any of you remember such an article or have the knowledge on how to do it?

  Read the article

• Desktop directory disappears in gnome-terminal, then appears again, but all files in it are deleted

  - by Ingen

  I am able to see my Desktop and with all its various links and files. But in the terminal when I try to access the Desktop directory: cd ~/Desktop I get: bash: cd: /home/administrator/Desktop: No such file or directory Then I find I am unable to access any of the files on the Desktop when I click on them although the file icons are there. Then the icons disappear after my clicking on them. Then I am able to access the Desktop directory in the terminal but the directory is empty i.e. all the files/folders have been deleted. What's going on? How can I fix this?

  Read the article

• Shell Script to Start Mysql Server if not running

  - by user103373

  I have written a shell script to start mysql server & send a mail to admin user if it's restarted via shell script. What i am facing an issue if I run this shell script on terminal it's work perfectly & If same script runs via cronjob it's only sending the mail to the user & problem remains same. Is this problem relates to permission & how can i resolve it. Shell Script-------- #!/bin/bash EMAIL="[email protected]" SERVICE='mysql' if ps ax | grep -v grep | grep $SERVICE > /dev/null then echo "$SERVICE service running, everything is fine" else echo "$SERVICE is not running" /etc/init.d/mysql start cat <<EOF | msmtp -a gmail $EMAIL Subject: "Alert (Test Server) : Mysql Service is not running (Manually Restarted)" Mysql Server Restarted at: `date` EOF EXIT I am using msmtp for sending mail to the user on ubuntu 12.04 Server.

  Read the article

• Run command on startup / login (Mac OS X)

  - by Wolfy87

  I was not sure if this was for StackOverflow or here, I settled for here. I was wondering which file I should place this bash command in so it will be run on startup. # Start the MongoDB server /Applications/MongoDB/bin/mongod --dbpath /usr/local/mongo/data --fork --logpath /usr/local/mongo/log I have been scouring the net and think it is between ~/.bashrc, ~/profile, /etc/bashrc, /etc/profile or ~/.bash_profile. Although I have tried these and they seem to run on terminal startup not Mac startup. Am I missing a file here? Thanks for any help you can give.

  Read the article

• Cron job failing to backing up a Postgres database

  - by user705142

  I'm unsure what's going on here: I've got a backup script which runs fine under root. It produces a 300kb database dump in the proper directory. When running it as a cron job with exactly the same command however, an empty gzip file appears with nothing in it. The cron log shows no error, just that the command has been run. This is the script: #! /bin/bash DIR="/opt/backup" YMD=$(date "+%Y-%m-%d") su -c "pg_dump -U postgres mydatabasename | gzip -6 > "$DIR/database_backup.$YMD.gz" " postgres # delete backup files older than 60 days OLD=$(find $DIR -type d -mtime +60) if [ -n "$OLD" ] ; then echo deleting old backup files: $OLD echo $OLD | xargs rm -rfv fi And the cron job: 01 10 * * * root sh /opt/daily_backup_script.sh It produces a database_backup file, just an empty one. Anyone know what's going on here?

  Read the article

• How can I apply proxy settings system-wide on Linux?

  - by Sravan

  Our campus employs proxy server with authentication. So, I have to apply http://username:password@proxyIp:port/ bash configure file(suppose for wget or curl) or manually entering details for every graphical application (like gtalk).And also if I work with localhost (XAMPP), I have to configure XAMPP, and so on. If I have my proxy password changed I have to change it everywhere on the system! Is there a way I can apply proxy settings system-wide at one place.Even though I am asking for Linux, I would like to know it on windows also.

  Read the article

• how to get a decent emacs setup on linux

  - by Hersheezy

  I am currently interested in switching from vim to emacs. One of the more compelling reasons for this is the smooth integration with a unix environment. The most experienced emacs users I have seen have a bash prompt at the bottom of their window, with stdout going to a buffer right above it. They then interact with the output of programs such as grep in interesting ways. I am on Ubuntu 10.04 and the default emacs environment does not seem to do much for me in the way of integration. For example, in the M-x shell mode, output from basic commands like ls produce lots of strange characters and hitting the up arrow does not go to previous commands. Any recommendations on a good direction to go in?

  Read the article

• Open Terminal Here, as Root (OS X)

  - by cwd

  There is a pretty awesome applescript called "Open Terminal Here" ( http://www.entropy.ch/software/applescript/ ) which you can add to your finder's toolbar and click when you want to launch a terminal console which is set to that directory. Sometimes I need to be root, and so I end up starting terminal, doing something like sudo -i and then I have to change back to the previous directory because the sudo command is landing me in /var/root. I'm using sudo -i because I like it to load things like aliases / the bash profile. The script is applescript, and here's the important part of how it works: ... set cmd to "cd " & quoted form of the_path & " && echo $'\\ec'" ... tell application "Terminal" activate do script with command cmd How do I get this to load as root?

  Read the article

• freebsd dev server on virtualbox over windows

  - by g_kaya

  I need a unixy environment for development purposes. I hate doing things on windows but it is more stable for daily use and I don't have a mac, so I'm having to use windows (7). I want to run freebsd in a virtual machine, configure it to be the localhost server, be able to connect using ssh (within my home-network) and be able to install vbox guest addons. If guest additions aren't the best, I can use solaris or linux flavours. I need no gui. I don't know anything about network stuff, so I need a detailed explanation from vise people here, or a nice doc to read. Edit : To be more specific as requested, I use following on unices: *django 1.4 *apache *python (2.7) *emacs *mysql *probably node.js *bash scripting I use windows to be able to do daily things easily, like connecting to my tablet, browsing and learning java. And I don't want to use linux as my desktop os, beacuse it gets broken a lot, it's annoying to maintain wlan problems and some more.

  Read the article

• When I auto-start Supervisord on boot, the [program:start_gunicorn] don't start

  - by Charlesliam

  The [program:start_gunicorn] is running with no error when I manually start supervisord with this setup. [program:start_gunicorn] command=/env/nafd/bin/gunicorn_start priority=1 autostart=true autorestart=unexpected user=nafd_it redirect_stderr=true stdout_logfile=/env/nafd/logs/gunicorn_supervisor.log stderr_logfile=/env/nafd/logs/gunicorn_supervisor_err.log I successfully run this init script for my supervisord. But when I used auto-start init script for supervisord the gunicorn is not running. ]# service gunicorn status gunicorn: unrecognized service What do I need to do to make the [program:start_gunicorn] run when using auto-start supervisord on boot? Here's my gunicorn config. /env/nafd/bin/gunicorn_start #!/bin/bash NAME="nafd_proj" DJANGODIR=/env/nafd/nafd_proj SOCKFILE=/env/nafd/run/gunicorn.sock NUM_WORKERS=1 DJANGO_SETTINGS_MODULE=nafd_proj.settings DJANGO_WSGI_MODULE=nafd_proj.wsgi echo "Starting $NAME as 'NAFD Web Server'" source /env/nafd/bin/activate export DJANGO_SETTINGS_MODULE=$DJANGO_SETTINGS_MODULE export PYTHONPATH=$DJANGODIR:$PYTHONPATH RUNDIR=$(dirname $SOCKFILE) test -d $RUNDIR || mkdir -p $RUNDIR cd /env/nafd/nafd_proj exec ../bin/gunicorn ${DJANGO_WSGI_MODULE}:application --bind=127.0.0.1:8001 \ --name $NAME \ --workers $NUM_WORKERS \ --log-level=debug \` Any idea is really appreciated.

  Read the article

• How to run long time process on Udev event?

  - by neclude

  (sorry for my bad english) I want run ppp connection when my usb modem is connect. so i use next udev rule: ACTION=="add", SUBSYSTEM=="tty", ATTRS{idVendor}=="16d8",\ RUN+="/usr/local/bin/newPPP.sh $env{DEVNAME}" (my modem appear in /dev as ttyACM0) newPPP.sh: #!/bin/bash /usr/bin/pon prov $1 >/dev/null 2>&1 & Problem: udev event fire, newPPP.sh running, BUT newPPP.sh process will be killed after ~4-5s. ppp not have time to connect. (in it params is timeout 10s for dial up). How can i run long time process, that will not be killed? (I was try nohup. It don't work too.) System: Arch Linux

  Read the article

• Permission denied when trying to execute a binary burned to a CD-R

  - by user16654

  On an Ubuntu 9.10 (Karmic Koala) machine, I burned a CD from the command prompt using: cdrecord -v speed=16 dev=0,1,0 /FPS.iso The CD now contains an executable and some files. I tested the CD by loading it onto another machine (Red Hat 5.3) and when I try to run the program I get the following message: bash: ./FPS1_1: Permission denied I can open other files like text documents (the executable also comes with shared libraries). I realized I had burned the CD as root so I burned another one as another user but I still have the same problem. How can I remove this permission or what is the problem? P.S. the image was in / if that helps

  Read the article

• Setting JAVA_HOME on Ubuntu 10.x

  - by user20285

  I'm trying to get the Rhodes framework installed so I can develop Android apps. This requires that I install the SUN JDK and add JAVA_HOME and JAVA_HOME/bin to path. I thought I could solve this by editing my bash.bashrc file: JAVA_HOME="/usr/lib/jvm/java-6-sun/jre/bin/java" export JAVA_HOME PATH=$PATH:$JAVA_HOME/bin This still doesn't work, because when I run: rake run:android I get a prompt in the console that says the Java bin was not found in my path. However, running echo $PATH gets me: usernamee@ubuntu:~$ echo $PATH /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/home/username/ruby/gems/bin:/usr/lib/jvm/java-6-sun/jre/bin/java/bin:/home/username/ruby_files/android-sdk-linux_86/tools What are my options here? Edit: If the problem is not the export statement, how can I ensure that the Sun JDK is properly installed and that I am, in fact, pointing to the correct path in bashrc?

  Read the article

• Under *nix, how can I find a string within a file within a directory ?

  - by roberto

  Hi all. I'm using ubuntu linux, and I use bash from with a terminal emulator every day for many tasks. I would like to know how to find a string or a substring within a file that is within a particular directory. If I was knew the file which contained my target substring, I would just cat the file and pipe it through grep, thus: cat file | grep mysubstring But in this case, the pesky substring could be anywhere within a known directory. How do I hunt down my substring ?

  Read the article

• Specific cron at time point [closed]

  - by ARTI

  I have a very specific task, but can't handle it. I am not a programmer and totally n00b on bash scritps. So the question is, how to create a cron job like this: Script A.sh could be called at any time by hands, and it should create cron job to run script B.sh once at the nearest time point. For example I will have 4 time points: 10.00pm, 10.15pm, 10.30pm, 10.45pm. So if trigger a script A.sh at 10.07pm it should creat cron job to run ONCE script B.sh at 10.15h, because 10.15h is the nearest time point in future. Is it possible? How can I write such script A.sh? I use Centos 6 It is very important and urgent for me. Thank you very much.

  Read the article

• How do I debug an upstart job?

  - by Cerales

  I have the following job in /etc/init/collector: start on runlevel [2345] stop on runlevel [!2345] expect daemon exec /usr/bin/twistd -y /path/to/my/tac/file When I start the job with sudo service collector start, it hangs. If I ctrl-c and run initctl list, I see this: collector start/killed, process 616 I can't see an instance of the twistd daemon in ps, and the HTTP server it's supposed to be providing does not exist. I even tried this without 'expect daemon' and with a simple call to a one-line bash script using a script stanza, and it still doesn't work. I think I'm doing something very wrong. What could it be?

  Read the article

• Open application in background without losing current window focus. Fedora 17, Gnome 3

  - by Ishan

  I'm running a script in the background which loads an image with feh depending on which application is currently in focus. However, whenever the script opens the image, window focus is lost to feh. I was able to circumvent this by using xdotool to switch back to the application that was originally in focus, but this introduces a short annoying period of time where the focus is switched from feh to the application. My question is this: is there any way to launch feh in the background such that window focus is NOT lost? System: Fedora 17, Gnome 3, Bash Thanks a ton!

  Read the article

< Previous Page | 143 144 145 146 147 148 149 150 151 152 153 154  | Next Page >