Search Results

Search found 77950 results on 3118 pages for 'large file upload'.

Page 1766/3118 | < Previous Page | 1762 1763 1764 1765 1766 1767 1768 1769 1770 1771 1772 1773  | Next Page >

• How can I setup BluePill to Monitor a Rails App Running via Passenger (mod_rails)

  - by Jim Jeffers

  I recently launched a site running phusion passenger. Unfortunately, the site went down due to a frozen thread. I was able to save the server by doing kill -9 to the specific PID. Still though, I thought passenger was able to manage this automatically. I have a server with 1GB of memory running one rails app with passenger allotted up to 7 instances. However, when I came to discover the site went down I found that passenger had spawned 6 instances with one of them using up over 800mb of memory causing the server to swap. As a result I am hoping to setup something like bluepill on the server but I'm slightly confused as to how you go about doing it. Mainly because bluepill expects to start/stop the processes it's monitoring. However, in our case, passenger already restarts processes for us so we only need to monitor the pids of passengers instances and kill them once they've gotten too large. Has anyone here setup BluePill to monitor a rails app running under phusion's passenger? Any insight would be useful.

  Read the article

• ajax.googleapis.com stopping my Firefox

  - by Oscar Reyes

  Today for some strange reason, Firefox stops working properly because it is trying to fetch something from ajax.googleapis.com. Is there something I can do to avoid this? Safari and Chrome work just fine. I tried uninstalling Firebug and clearing the cache. The only thing that worked was disabling the JavaScript altogether. This seems to be the culprit link: http://ajax.googleapis.com/ajax/libs/jquery/1.3.2/jquery.min.js What can I do? EDIT I think I have found where the problem is. My proxy is serving one byte at a time the file, so firefox consume it at that peace. What I don't understand is why Safari and Chrome takes it right away. What I did last night was, leave the FF open all the night to give him change to load the file, my hope was that I got cached and the next time there was no need to go for it. Today in the morning, the page load successfully but the page was not cached, because the next request failed the same. Here's a video showing the problem:

  Read the article

• Regular issue with keys on temp tables

  - by Christian

  We run a large forum with lots of reads and writes, particularly to the posts and topics tables which are both innodb. Last week I started doing 12 hourly backups with innobackupex because mysqldump just takes forever (7+ million rows in posts table.) It seems that something doesn't like these backups because I have a recurring problem every other day. The symptoms; The front page of the site starts throwing errors The logs start showing errors like Error: 126 - Incorrect key file for table '/tmp/mysql/#sql_4e87_14.MYI'; try to repair it The /tmp/ dir fills up and we start getting Error: 1030 - Got error 28 from storage engine in the logs. The only way to fix is to optimize table on each of the posts and topics tables. I'm trying all I can to stop MySQL using disks for temp tables, but I'd have more problems than this if it used all my memory also. My my.cnf is here; https://gist.github.com/cbiggins/0aa26f6defb7a14541d7 The box has 32GB memory and I don't come near that usually. Currently at 15GB use. Thanks in advance. Update 1: Despite the conf looking like there is replication, there isn't. This is a stand alone instance.

  Read the article

• How harmful is a hard disk spin cycle?

  - by Gilles

  It is conventional wisdom¹ that each time you spin a hard disk down and back up, you shave some time off its life expectancy. The topic has been discussed before: Is turning off hard disks harmful? What's the effect of standby (spindown) mode on modern hard drives? Common explanations for why spindowns and spinups are harmful are that they induce more stress on the mechanical parts than ordinary running, and that they cause heat variations that are harmful to the device mechanics. Is there any data showing quantitatively how bad a spin cycle is? That is, how much life expectancy does a spin cycle cost? Or, more practically, if I know that I'm not going to need a disk for X seconds, how large should X be to warrant spinning down? ¹ But conventional wisdom has been wrong before; for example, it is commonly held that hard disks should be kept as cool as possible, but the one published study on the topic shows that cooler drives actually fail more. This study is no help here since all the disks surveyed were powered on 24/7.

  Read the article

• Invalid Parameter on node puppet

  - by chandank

  I am getting an error of err: Could not retrieve catalog from remote server: Error 400 on SERVER: Invalid parameter port at /etc/puppet/manifests/nodes/node.pp:652 on node test-puppet My puppet class: (The Line 652 at node.pp) node 'test-puppet' { class { 'syslog_ng': host => "newhost", ip => "192.168.1.10", port => "1999", logfile => "/var/log/test.log", } } On the module side class syslog_ng::config ( $host , $ip , $port, $logfile){ file {'/etc/syslog-ng/syslog-ng.conf': ensure => present, owner => 'root', group => 'root', content => template('syslog-ng/syslog-ng.conf.erb'), notify => Service['syslog-ng'], require => Class['syslog_ng::install'], } file {"/etc/syslog-ng/conf/${host}.conf": ensure => present, owner => 'root', group => 'root', notify => Service['syslog-ng'], content => template("syslog-ng/${host}.conf.erb"), require => Class['syslog_ng::install'], } } I think I am doing it as per the puppet documentation.

  Read the article

• Passenger not booting Rails App

  - by firecall

  I'm at the end of ability, so time to ask for help. My hosting company are moving me to a new server. I've got my own VPS. It's a fresh CentOS 5 install with Plesk 9.5.2 Essentially Passenger just doesnt seem to be booting the Rails app. It's like it doesnt see it's a Rails app to be booted. I've got Rails 3.0 install with Ruby 1.9.2 built from source. I can run Bundle Install and that works. I've currently got Passenger 3 RC1 installed as per here, but have tried v2 as well. My conf/vhost.conf file looks like this: DocumentRoot /var/www/vhosts/foosite.com.au/httpdocs/public/ RackEnv development #Options Indexes I've got a /etc/httpd/conf.d/passenger.conf file which looks like this: LoadModule passenger_module /usr/local/lib/ruby/gems/1.9.1/gems/passenger-3.0.0.pre4/ext/apache2/mod_passenger.so PassengerRoot /usr/local/lib/ruby/gems/1.9.1/gems/passenger-3.0.0.pre4 PassengerRuby /usr/local/bin/ruby PassengerLogLevel 2 and all I get is a 403 forbidden or the directory listing if I enable Indexes. I dont know what else to do! Yikes. There's nothing in the Apache error log that I can see. The new server admin isnt much help as I think he's a bit junior and says he doesnt know about Rails... sigh :/ I'm a programmer and server admin isnt my bag :(

  Read the article

• What's the state of the art in image upscaling?

  - by monov

  I like to collect cool pics and use them as wallpapers or for other things. Often, artists publish only low-res versions, probably for fear of theft. Example: Gabriel Pulecio's BIRDS Now, if I want to use that as a wallpaper, I'd have to upscale it, and obviously that'd make it look blurry because of the bicubic interpolation. I realize there's no real way to get a high-res version from a low-res pic, because the information is not simply there. That said, I'm wondering if heuristics have been developed for upscaling with less apparent loss of quality. Those would probably be optimized for specific image types. For photorealistic pictures, for cartoons with large flat areas, for pixel art... One algorithm I'm aware of is Seam Carving. It works for some kinds of pics, especially ones with a plain, undetailed or uninteresting background, and a subject that strongly stands out. But it's far from being general-purpose. Applying it to the above pic produces this. It looks quite sharp, but the proportions are horribly distorted because the algorithm is not designed for this kind of pic. Another is Pixel art scaling algorithms. Those are completely unfit for anything other than actual pixel art that's pixelized to begin with. For example, I tried the scale2x windows binary on my pic, but its output was nearly indistinguishable from nearest-neighbour scaling because the algorithm didn't detect any isolated pixely fragments to work from. Something else I tried was: I enlarged the image in Photoshop with bicubic interpolation, then I applied unsharp mask. The result looks pretty bad. The red blotch is actually resized reasonably well, but the dove is far from it. What I'm looking for is some app that makes a best-effort attempt at upscaling any input image while minimizing blurriness. If you know of any, I'll be thankful. Note that the subjective prettiness and sharpness of the result is what matters... the result doesn't need to be completely faithful to the original small image.

  Read the article

• VSFTPD 530 Login incorrect

  - by sc.

  I'm trying to get a vsftpd server set up on CentOS 5.3 x64. I'm not able to get any local user login's to work. Here is my vsftpd.conf: local_enable=YES write_enable=YES pam_service_name=vsftpd connect_from_port_20=YES listen=YES pam_service_name=vsftpd xferlog_std_format=NO log_ftp_protocol=YES chroot_local_user=YES Here is the output of vsftp.log: Mon Sep 13 23:34:44 2010 [pid 19243] CONNECT: Client "10.0.1.138" Mon Sep 13 23:34:44 2010 [pid 19243] FTP response: Client "10.0.1.138", "220 (vsFTPd 2.0.5)" Mon Sep 13 23:34:44 2010 [pid 19243] FTP command: Client "10.0.1.138", "USER dwelch" Mon Sep 13 23:34:44 2010 [pid 19243] [dwelch] FTP response: Client "10.0.1.138", "331 Please specify the password." Mon Sep 13 23:34:44 2010 [pid 19243] [dwelch] FTP command: Client "10.0.1.138", "PASS <password>" Mon Sep 13 23:34:44 2010 [pid 19242] [dwelch] FAIL LOGIN: Client "10.0.1.138" Mon Sep 13 23:34:45 2010 [pid 19243] [dwelch] FTP response: Client "10.0.1.138", "530 Login incorrect." And the output of the secure log: Sep 13 17:40:50 intra vsftpd: pam_unix(vsftpd:auth): authentication failure; logname= uid=0 euid=0 tty=ftp ruser=dwelch rhost=10.0.1.138 user=dwelch It looks like pam is not authenticating the user. Here is my /etc/pam.d/vsftp file: #%PAM-1.0 session optional pam_keyinit.so force revoke auth required pam_listfile.so item=user sense=deny file=/etc/vsftpd/ftpusers onerr=succeed auth required pam_shells.so auth include system-auth account include system-auth session include system-auth session required pam_loginuid.so Can anyone see what I'm missing? Thanks.

  Read the article

• Networking - intermittent, slow speeds

  - by jack

  Hi all I'm a novice when it comes to networking. I live in a large two storey building that used to be a school and we have an internet connection with BT (british telecoms provider), the connection speed is 12Mb.. Basically our connection is slow and very intermittent and I was wondering if anybody here could provide some help or ideas. There are about 11 people in the building who could be online at any time. We have a router on the ground floor which is bog standard supplied by BT. To provide Broadband access to the 1st and 2nd floors, we used an old switch that the school left, we have a cable running from the router on the first floor to the switch which connects to a wireless router which is configured as a bridge on the 2nd floor supplying broadband access to the 1st and 2nd floors. Additionally we have 3 computers that are connected via the switch through the ethernet sockets left by the school on the ground floor. The router we use on the 2nd floor came in a pack of 2 and cost about £15 (bought by another person). Sometimes the connection is perfectly fine, i.e. early hours of the morning or when everybody is out, we have rang BT who say that the connection cannot cope with the numbers of people online, plus I'm not sure whether each person is streaming etc. Can anybody offer any advice?

  Read the article

• ntpd on Fedora Core 6 with high negative time reset values

  - by Mark White

  The basic problem is we have a FC6 server instance running on a virtual machine, and the system time seems to have been slowly varying until it is now causing a problem. The server runs 24/7 and has been up for 155 days. It has been changed to show GMT, and reports the time as (example) 00:15:15 GMT whereas the actual time is 00:00:00 GMT. This is an offset of 915 seconds. selinux has been changed to 'setenforce 0' for testing and I am running as root. I stop the ntpd service and change the time in System|Administration|Date & Time. The time still shows the same with 'date' in bash. There are no error logs. I change the date with 'date --set' in bash. The response confirms the changed date. I run 'date' and the incorrect date is shown. There are no error logs. I start the ntpd service and /var/log/messages shows success with 'time reset -915.720139s'. The date remains unchanged. ntpq -p shows three three time servers all have offsets of around -915 seconds. I stop ntpd service and try 'ntpd -gqx' and get the same result as above - success, but a large negative time reset. I've tried varying combinations of the above, and a few more settings in System|Administration|Date & Time - no change. I just need to reset the system time to GMT. No offset. But I can't wait for ntpd to slew the time over the next few weeks. Any advice is welcome, cheers! Surely this shouldn't be this difficult... Mark...

  Read the article

• In GNU Screen, Recalled bash history command displays one character position to the left of actual location

  - by vergueishon

  I am running Red Hat 5 32-bit (2.6.18-194.26.1.el5). The issue is that when I recall any previous command in bash's history, the first character in the command is displayed immediately after the shell prompt, without any intervening space, likeso: \[me@mymachine tmp]$man mysql If I enter a Ctrl-C, and retype the command, it looks likeso: \[me@mymachine tmp]$ man mysql This makes recalling a command and editing it before re-entering a real pain. Basically, if I try to edit a recalled command, my changes occur one character position to the left (I believe) of what I see on the screen. It's a bit tedious to describe, and appears to only happen with commands with a large number of arguments. UPDATE: The contents of /etc/sysconfig/bash-prompt-screen, 1 #!/bin/bash 2 echo -n $'\033'"_${USER}@${HOSTNAME%%.*}:${PWD/#$HOME/~}"$'\033\\\\' and the contents of /etc/bashrc, 24 screen) 25 if [ -e /etc/sysconfig/bash-prompt-screen ]; then 26 PROMPT_COMMAND=/etc/sysconfig/bash-prompt-screen 27 else 28 PROMPT_COMMAND='echo -ne "\033_${USER}@${HOSTNAME%%.*}:${PWD/#$HOME/~}"; echo -ne "\033\\"' 29 fi 30 ;; I've disable bash-prompt-screen by renaming it--this fixed it. It's entirely possible that there is a fix to the bash-prompt-screen prompt line in the latest version of screen for RHEL 5. The error is seen under Screen version 4.00.03 (FAU) 23-Oct-06. (I noticed an update in the queue, which is installing as I write this.)

  Read the article

• How can I parse/ transform text log data before it gets captured in SCOM 2007 R2?

  - by Abs

  I'm pretty much a noob with System Center Operations Manager 2007, and I'm probably missing something pretty basic, but I'm stumped anyway. We're setting up monitoring on some of our servers, and we'd like to capture data from some plain text log files (e.g. DNS debug logs, DHCP logs). It looks to me like I can set up a generic text file monitoring rule and get events captured into the main Ops Manager database, but my understanding is that the whole line of text from the plain text log gets captured as one field. In an ideal world, we'd be able to parse or transform that log file data to make it easier to query later. Is this possible? Is it easy? Do I have to buy expensive 3rd-party software to do it? One more thing: it would be even better if there was a way to stuff this data into the Audit Collection Services (ACS) database instead of the main one, but I'll take what I can get. Any help would be greatly appreciated.

  Read the article

• Is there a quick way of undoing a folder change in Far Manager?

  - by Johannes Rössel

  I love Far Manager. However, it has a feature to quickly go to the root directory of a drive with Ctrl+\. I do sometimes need and use this feature, but more frequently I use Ctrl+? to quickly insert the file name under the cursor into the command line. As it so happens, the ? key is located dangerously close to \ which is why I sometimes erroneously go the root directory (which then is doubly unfortunate since I originally wanted to work with a file in the directory I was in). Now I could probably just redefine Ctrl+\ to do nothing, although I still sometimes need that (can be replicated with a quick cd\, though). But Windows Explorer, in the wake of the WWW, provided us with a handy directory history and two separate ways of navigating backwards: backwards through the history and backwards through the hierarchy. Is there something quick and easy to get back to the folder I were in? This is less of an issue in C:\Users\Me (still nagging) but more so in deeper hierarchies.

  Read the article

• Getting Windows (VMware) to load from OSX's localhost without an Internet Connection

  - by Jonah Goldstein

  I'm using MAMP to host my local sites, and VirtualHostX so that I can access sites during local development via a convenient URL like mysite.dev I'm also running Windows XP via VirtualBox, and it would be great to be able to load up any of my local sites within windows while offline as currently often working without access, on the move, unfortunately. I know that I can append my IP and a nice domain name to the host file in C:/WINDOWS/system32/drivers/etc ... and i can find my IP simply through terminal with "ifconfig" while I'm online. The problem is that when I'm not online, there's no IP. Even if there is an IP (when i have a connection), I still have grab it and update the windows hosts' file all the time, since I'm developing from a laptop and have a new IP at the drop of a dime. I found a tutorial where the author is able to get a permanent IP. He uses VMware Fusion as his VMachine, which is the only difference between his setup and mine. By running the terminal command "ifconfig vmnet1" he gets: a secret IP the virtual machine uses to talk to OSX And that doesn't change - which is awesome. I'm assuming it exists even if he's offline. His tutorial is here, http://bit.ly/U2lq It would be pretty fantabulous if I could replicate this with virtualBox. Anyone have ideas? Thanks:)

  Read the article

• Asterisk, IAXModem & Hylafax how-tos?

  - by Brian Postow

  I'm trying to set up Asterisk and IAXModem to send faxes via T38 (Yes, I know I'm swatting a fly with a Buick...) However, since I'm trying to do something so small with a product so large, I'm having trouble finding samples or how-tos that show me how to set this up. I've got all three installed, and I THINK I have my IAXModem config correct. I'm pretty sure that I have Hylafax correct (I've used it with T38Modem) so, I need to know which of the Asterisk samples I need to use, and how to use them. I think I want to use some combination of iax.conf, iaxprov.conf, sip.conf and sip_notify.conf. But I'm not sure where to put them, or what to change... I'm sure that the answer is RTFM, but I'm not sure WHICH M, or where in it to R... thanks. EDIT On a mailing list, someone told me that this actually WON'T WORK because IAX doesn't do T38. So, is there some other way to get Asterisk to work with Hylafax and send T38? I know that Asterisk does T38, the question is how to get the data from Hylafax and back...

  Read the article

• MySQL Master-Master w/ multiple read slave cost effective setup in AWS

  - by Ross

  I've been evaluating Amazon Web Services RDS for MySQL and costing out potential scenarios involving a simple multi-AZ deployment read/write setup vs. a multi-AZ deployment mysql master (hot-standby) with additional read-only slaves. the issue I'm trying to cost-optimize includes their reserved instance vs on-demand instances. Situation 1: purchase reserved multi-az setup for Extra-large-hi-mem(17GB RAM) instance for $5200/yr and have my application query the master all the time. the problem is, if I don't need all the resources of the (17GB RAM) all the time and therefore, especially not a hot-standby, what alternatives for savings can a better topology create, like potentially situation 2 below: Situation 2: purchase reserved multi-az setup using smaller master instances than above for the master-master hot-standby to receive the writes only. Then create and load balance several read-only slaves off the master and add/remove and/or scale up/down the read slaves based on demand. This might only cost $1000 + the on-demand usage of the read slaves. My thinking is, if I have a variable read-intensive application load, with low write load, the single level topology in situation 1 means I'm paying for a lot of resources at the write level of topology when I don't need them there. My hope is that situation 2 can yield cost savings from smaller reserved instances on the master-master resource level allowing me to scale up and down and/or out on the read-level according to demand as needed. Does anyone see a downside to doing this or know of some reason this isn't possible with RDS? Any other thoughts or advice always welcome of course. Thanks in advance, R

  Read the article

• New hard drive for backup? [closed]

  - by glaeven

  I have come to realize that I need another external drive to use with my MacBook Pro. I currently have a 1TB WD MyBook Essential that I have been using for about a year and a half. I have it currently partitioned into two drives, one for backup (I named it Leonov) and one for movies, TV shows and other large files I don't need very often (I call that side Discovery One). I use Time Machine for backups since it is completely automated and I can restore from it without much trouble (I have had to at least three times now). As of now, Leonov is full enough that every backup deletes an old one and Discovery One is approaching it's limits. I would like to get a new drive and move one of the sides to it. What are some reliable, external (~1TB) drives for under or around $100? Would it be easier to move the movies (et al.) or the backups to the new drive? I also feel like I should say that all of my important documents (for school and the like, just not my music) are also synced to Dropbox as another form of backup and access.

  Read the article

• VMWare Newbie - looking for hardware recommendations and help :) [closed]

  - by Dan

  I am looking for some hardware recommendations on an upcoming virtualization project. We are a small company (80 users - 25 in site 1, 55 in site 2) currently using Windows Server 2003 - no VM servers yet. Our AD is setup where site 1 is the root domain and site 2 is a subdomain/subnet - connected by T1 and VPN for failover. The current DC's also server as file servers, print servers, AntiVirus servers. Email is in the cloud. Additionally then in site 1 we have 3 additional member servers - one running IBM Websphere for a customer specific app, one running Infor PowerLink (no real heavy load) and another that we use for Virtual Studio apps and also runs DirSync for Exchange Online. No heavy workloads on any of these machines really. We also have an AS400 box that we run ERP/CRM software on that site 2 connects to over the WAN link. In site 2 we also have a SQL machine that runs on Win2K server. Database files are not large less than 5 GB. Light to Medium workload on this machine. File servers in each site store less than 500 GB data and probably won't grow to more than 1TB in the next 5 years. I am looking to go to VMWare in both sites and virtualize all servers. What recommendations do you have for server, storage hardware? Is it safe to virtualize all of your DC's? Any help or advice would be greatly appreciated. Thanks.

  Read the article

• Ruby Passeger + Nginx or lighthttpi + fgci for shared hosting

  - by devnull

  I have set up a passenger + nginx setup and I plan to offer a free non-commercial hosting (or in fact on the fly deployment) for rack-based frameworks (e.g. camping, sinatra). I am facing an "issue" with passenger. For each application you need to configure nginx.conf (it would be the same with apache so it is not an nginx issue) with: server { ... passenger_base_uri /app1; passenger_base_uri /app2; passenger_base_uri /app3; } Now this is not inherently bad as, in theory, I could allow a user to run just one app on his webspace but even in this case I need to create a new server directory on nginx e.g. (user.domain.com). As this will mainly be used to deploy apps the behavior I am looking at is more the possibility to auto map several apps (e.g. app1, app2, app3, app4) under the same server (your app.com/app1 yourapp.com/app2) without having to update the nginx or apache file each time. This seems to be a limitation in passenger. As such I am thinking about an alternative with lighttpd and fastcgi. Would this allow immediate deployment without touching the lighttpd config file e.g. I create a new directory with app2 and it will run immediately ? What is your experience in performance difference between passenger + nginx vs. lighttpd + fastcgi ? thanks in advance scenario details: on nginx + passenger - user cannot add a new sub-folder and run another sinatra/camping app without declaring the path on nginx.conf and restarting the server; wished behavior with the new setup: - user can add a new folder with a new app and it would run on lighttpd+fcgi without any extra configuration of the web server;

  Read the article

• How to send Content-Disposition headers in apache for files?

  - by Rory McCann

  I have a directory of text files that I'm serving out with apache 2. Normally when I (or any user) access the files they see them in their browser. I want to 'force'* the web browser to pop up a 'Save as' dialog box. I know this is possible to do with the Content-Disposition headers (more info). Is there some way to turn that on for each file? Ideally I'd like something like this: <Directory textfiles> AutoAddContentDispositionHeaders On </Directory> And then apache would set the correct content disposition header, including using the same filename. Something like this might be possible with the apache Header directive. Bonus points if it's included by standing in apache in debian. I could do a simple PHP wrapper script that takes in a filename argument, makes the call to header(...) and then prints the file, but then i have to validdate input etc. that's work I'm trying to avoid. * I know you can't actually force things when it comes to the web

  Read the article

• Virtualized Screen Resolution

  - by Jim R

  I have a 64 bit Ubuntu 9.10 workstation with two virtualized guest OSes using KVM/QEMU. Also both 64-bit. One is Fedora 12 the other is beta of Ubuntu 10.04. The problem is that I would like to use a larger size display that is configured by default. Both guest OSes have a maximum screen resolution of 1024x768. I would like to increase this to something like 1280x900 or 1440x900. The resolution of the host system is 1920x1080. This configuration appears to be a result of the installation detecting the resolution being reported by the virtual screen during installation. The only information I have found on the subject suggests modifying the xorg.conf file in the /etc/X11 directory. Neither guest system has this file. I tried creating one by hand in the Fedora system and managed to render it completely unusable. Not a big deal as this is recently installed and can be reinstalled easily. Is what I want to do possible? If so, how do I accomplish it?

  Read the article

• FreeBSD slow transfers - RFC 1323 scaling issue?

  - by Trey

  I think I may be having an issue with window scaling (RFC 1323) and am hoping that someone can enlighten me on what's going on. Server: FreeBSD 9, apache22, serving a static 100MB zip file. 192.168.18.30 Client: Mac OS X 10.6, Firefox 192.168.17.47 Network: Only a switch between them - the subnet is 192.168.16/22 (In this test, I also have dummynet filtering simulating an 80ms ping time on all IP traffic. I've seen nearly identical traces with a "real" setup, with real internet traffic/latency also) Questions: Does this look normal? Is packet #2 specifying a window size of 65535 and a scale of 512? Is packet #5 then shrinking the window size so it can use the 512 scale and still keep the overall calculated window size near 64K? Why is the window scale so high? Here are the first 6 packets from wireshark. For packets 5 and 6 I've included the details showing the window size and scaling factor being used for the data transfer. Code: No. Time Source Destination Protocol Length Info 108 6.699922 192.168.17.47 192.168.18.30 TCP 78 49190 http [SYN] Seq=0 Win=65535 Len=0 MSS=1460 WS=8 TSval=945617489 TSecr=0 SACK_PERM=1 115 6.781971 192.168.18.30 192.168.17.47 TCP 74 http 49190 [SYN, ACK] Seq=0 Ack=1 Win=65535 Len=0 MSS=1460 WS=512 SACK_PERM=1 TSval=2617517338 TSecr=945617489 116 6.782218 192.168.17.47 192.168.18.30 TCP 66 49190 http [ACK] Seq=1 Ack=1 Win=524280 Len=0 TSval=945617490 TSecr=2617517338 117 6.782220 192.168.17.47 192.168.18.30 HTTP 490 GET /utils/speedtest/large.file.zip HTTP/1.1 118 6.867070 192.168.18.30 192.168.17.47 TCP 375 [TCP segment of a reassembled PDU] Details: Transmission Control Protocol, Src Port: http (80), Dst Port: 49190 (49190), Seq: 1, Ack: 425, Len: 309 Source port: http (80) Destination port: 49190 (49190) [Stream index: 4] Sequence number: 1 (relative sequence number) [Next sequence number: 310 (relative sequence number)] Acknowledgement number: 425 (relative ack number) Header length: 32 bytes Flags: 0x018 (PSH, ACK) Window size value: 130 [Calculated window size: 66560] [Window size scaling factor: 512] Checksum: 0xd182 [validation disabled] Options: (12 bytes) No-Operation (NOP) No-Operation (NOP) Timestamps: TSval 2617517423, TSecr 945617490 [SEQ/ACK analysis] TCP segment data (309 bytes) Note: originally posted http://forums.freebsd.org/showthread.php?t=32552

  Read the article

• Nginx + PHP5-FPM repeated cut outs 502

  - by James

  I've seen a number of questions here that highlight random 502 (Nginx + PHP-FPM = "Random" 502 Bad Gateway) and similar time outs when using Nginx + PHP-FPM. Even with all the questions, I'm still unable to find a solution. Using Ubuntu 10.10 + Nginx + PHP5-FPM + APC and every 1 out of 4 requests ends in a timeout and failure. This isn't a load issue or large traffic, it happens even in dev environment with one person. I am doing this across 3 1GB machines, each with the same configurations and same problems. fastcgi_params fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param REQUEST_URI $request_uri; fastcgi_param DOCUMENT_URI $document_uri; fastcgi_param DOCUMENT_ROOT $document_root; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param GATEWAY_INTERFACE CGI/1.1; fastcgi_param SERVER_SOFTWARE nginx/$nginx_version; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; fastcgi_param REDIRECT_STATUS 200; /etc/php5/fpm/main.conf ; FPM Configuration ; ;include=/etc/php5/fpm/*.conf ; Global Options ; pid = /var/run/php5-fpm.pid error_log = /var/log/php5-fpm.log ;log_level = notice ;emergency_restart_threshold = 0 ;emergency_restart_interval = 0 ;process_control_timeout = 0 ;daemonize = yes ; Pool Definitions ; include=/etc/php5/fpm/pool.d/*.conf /etc/php5/fpm/pool.d/www.conf [www] listen = 127.0.0.1:9000 ;listen.backlog = -1 ;listen.allowed_clients = 127.0.0.1 ;listen.owner = www-data ;listen.group = www-data ;listen.mode = 0666 user = www-data group = www-data ;pm.max_children = 50 pm.max_children = 15 ;pm.start_servers = 20 pm.min_spare_servers = 5 ;pm.max_spare_servers = 35 pm.max_spare_servers = 10 ;pm.max_requests = 500 ;pm.status_path = /status ;ping.path = /ping ;ping.response = pong request_terminate_timeout = 30 ;request_slowlog_timeout = 0 ;slowlog = /var/log/php-fpm.log.slow ;rlimit_files = 1024 ;rlimit_core = 0 ;chroot = chdir = /var/www ;catch_workers_output = yes

  Read the article

• apache 2.4, mod_proxy_fcgi not honouring .htaccess, work around needed

  - by user229874

  I am using apache 2.4.7 with mod_proxy_fcgi for purpose of passing through php to php-fpm (this will be used for shared hosting environment). The htaccess works fine for non php files, but once it hit rewrite rule that proxies through the php requests, the htaccess is ignored. I know why it is happening. The question is: how do I work around it? The question how do I force apache to treat the request to php file as a request to local file, and then proxy it through? I have spent substantial time in researching on this problem, and following "answers" were given as solution: 1) "use apache configuration instead of .htaccess" it is valid solution, but not for shared hosting environment (I am not going to give access to apache configuration to shared hosting customers ;)). 2) "don't use .htaccess, as it has performance/security/other issues", well how else would shared hosting customers control access/url rewriting on their site? Besides if the .htaccess was not a requirement I would simply use nginx. 3) "put rewrite rule for proxy inside of " - this is incorrect, and it does not work. This behaviour appears to be not a bug but a "feature" as per https://issues.apache.org/bugzilla/show_bug.cgi?id=54887

  Read the article

• Virtualized Screen Resolution

  - by Jim R

  I have a 64 bit Ubuntu 9.10 workstation with two virtualized guest OSes using KVM/QEMU. Also both 64-bit. One is Fedora 12 the other is beta of Ubuntu 10.04. The problem is that I would like to use a larger size display that is configured by default. Both guest OSes have a maximum screen resolution of 1024x768. I would like to increase this to something like 1280x900 or 1440x900. The resolution of the host system is 1920x1080. This configuration appears to be a result of the installation detecting the resolution being reported by the virtual screen during installation. The only information I have found on the subject suggests modifying the xorg.conf file in the /etc/X11 directory. Neither guest system has this file. I tried creating one by hand in the Fedora system and managed to render it completely unusable. Not a big deal as this is recently installed and can be reinstalled easily. Is what I want to do possible? If so, how do I accomplish it?

  Read the article

< Previous Page | 1762 1763 1764 1765 1766 1767 1768 1769 1770 1771 1772 1773  | Next Page >