Search Results

Search found 94030 results on 3762 pages for 'user tips'.

Page 2039/3762 | < Previous Page | 2035 2036 2037 2038 2039 2040 2041 2042 2043 2044 2045 2046  | Next Page >

  • Windows 7 File Transfer Speed over Gigabit is slow

    - by Adam Haile
    I've got windows 7 pro running on my file server and my main desktop. Each has a gigabit network connection and I'm connected to a gigabit switch. However, when trying to copy some large files, it's running pretty slow at a measly 12-15 MB/s The data is coming from a 7200RPM SATA drive (which I think should be good for almost 150MB/s) and going to a Drobo on the server connected via FireWire 800, so I can't think of any bottlenecks I might have in the hardware. But TeraCopy still says it's only going at 12-15 MB/s What else could be wrong here?

    Read the article

  • Why is the System process listening on Port 443?

    - by Cornelius
    I am having problems starting my apache server, because port 443 is already in use. It turns out, the system process (PID 4) uses the port 443. I don't have IIS installed, the services.msc shows (predicatbly) no Exchange server running, nor WWW-Services, nor IIS. I have no idea how to find out what service uses that port short of just disabling each service one after the other, and I am not even sure that would help. I would be grateful if someone could point me towards how I can get my SSL port back, thank you :) P.S.: Of course "just switch apache to another port for SSL" would solve the problem of not being able to start apache. But I'd still like to know what is so insistent about hogging port 443. :) Edit: I by now took the 'hard route' and disabled services one after the other. It turned out that the "Routing and RAS" service was the culprit. Thank you all for the valuable input and the new tools in the combat against "WTF does my system do now".

    Read the article

  • Windows 7 can't reconnect network drives on startup

    - by Znarkus
    Hi! I have this annoying problem that Windows 7 won't reconnect to my network drives on startup. The shares are on an Ubuntu machine. I've tried every possible solution I've found: Enable password on logon to give the network interface time to boot up Check Connect using different credentials Tried both options in this screen Sorry for the long post. Can You please help me to solve this?

    Read the article

  • VMWare Input/Output error on ubuntu host Win7 guest

    - by CShipley
    I am running ubuntu 10.10 as my host with Windows 7 as the guest. About a couple weeks ago I started getting error pop-ups from vmware reporting inability to read or write to a particular file. On futher investigation, I've noticed that I cannot copy that particular file from the linux command line even as root. I get the same input/output error. The SMART utility tells me I have 69 bad sectors on the disk (it is 1 TB) So my question is 1) How do I tell if that HD is going bad? 2) How can I move the VM files to a different part of the disk if I get read/write errors when I try to copy?

    Read the article

  • kernel 2.6.36 not booting

    - by Saumitra
    Hi, I m a newbie to kernel programming. I am trying to boot the kernel 2.6.36 on my ECG machine.It was working perfectly on 2.6.33.2. It is getting stuck on this step: ## Booting kernel from Legacy Image at 81000000 ... Image Name: Created: 2010-12-27 5:55:56 UTC Image Type: MIPS Linux Kernel Image (gzip compressed) Data Size: 1974278 Bytes = 1.9 MB Load Address: 80100000 Entry Point: 80104730 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Starting kernel ... After this the system either resets or it hangs. I have also checked the configuration & set it properly.Please let me know.

    Read the article

  • Maker/ Checker Design Module

    - by user288198
    i want to design maker/ checker module in my project like if user A add new user so the another User B will approve or reject this adding. i want to know the best practices of design for this module in the database ....... any help

    Read the article

  • Change windows default path or last used path for saving files? Is that possible?

    - by Mark
    I'm trying to change the default saving path to my specfied path for example if the file is picture (.jpg .gif etc..) and using google chrome I save an image the path can be anything from default or last used so I want it to be mine specfied for example I choose "C:\SaveHerePics" I don't know how you can change it maybe Registry? Dll? I would like to create vb.net program with textbox you choose the new location to be located every time for example "C:\SaveHerePics" and it should not have anything to do with this program even if you close the program the default location for pictures saved via any program or source saved to "C:\SaveHerePics" Thanks a lot for your help!

    Read the article

  • Where can I get a Linux distro iso based on a 2.4 kernel?

    - by Mike
    I need to get my hands on an ISO file for a Linux distribution with a 2.4 kernel. I'm looking for an ISO specifically so I can use it with my Oracle VirtualBox. Since 2.4 is so old these days, I'll explain that I'm looking for it because my company uses an ancient 2.4 uClinux distro on our ancient hardware in our devices. I'd like to run some "desktop" tests using the same kernel version as what's in the hardware. As far as I can tell I can't run uCLinux on a desktop, so next best thing, I'd like to get anything running 2.4.

    Read the article

  • How do I split a large MySql backup file into multiple files?

    - by Brian T Hannan
    I have a 250 MB backup SQL file but the limit on the new hosting is only 100 MB ... Is there a program that let's you split an SQL file into multiple SQL files? It seems like people are answering the wrong question ... so I will clarify more: I ONLY have the 250 MB file and only have the new hosting using phpMyAdmin which currently has no data in the database. I need to take the 250 MB file and upload it to the new host but there is a 100 MB SQL backup file upload size limit. I simply need to take one file that is too large and split it out into multiple files each containing only full valid SQL statements (no statements can be split between two files).

    Read the article

  • What is the best file system to use for a second hard drive when dual booting between WinXP and Win7

    - by Corey
    I am dual booting for legacy reasons, and I have a 2nd internal drive that I would like to use from both XP and 7. Should I go with the standard NTFS? (will the secuirty features be an issue, with different SIDs from the different users) Should I go with FAT32? Should I try out the new exFAT? Also, I curently have two of my 3 drives as "dynamic disks" and 1 spaned volume created on them. (i did this from XP) Win7 can see them/it fine. Is this an ok thing to do?

    Read the article

  • Windows: Create shortcut to changing folder name

    - by mikeparkie
    I have some portable apps and when I download them they extract to a normal directory structure, but the structure includes a version number, How do I create a start-up shortcut to the program so it doesn’t break when the application is updated? For example: I can create a shortcut to “D:\PortableApp\V1\prog.exe” and place the shortcut into Startup items and it works fine. Now the program is updated to V1.1. How do I get the shortcut to update to “D:\PortableApp\V1.1\prog.exe”without manually updating the shortcut? Thanks in advance mikeparkie

    Read the article

  • Can I extend my total RAM by buying more, and what kind do I need to buy

    - by Xeon06
    I currently have 4 GB total RAM and I would like to get some more, to bring it to a total of 8 GB. Is it possible to simply buy another 4 GB and bring it to 8? If so, what kind should I be buying? There is a lot of different possibilities, DDR3, DDR2, clock speed, etc. I am kind of lost among all this. My current setup goes like this: ACER EG43M mainboard Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz 4 total RAM slots, 2 occupied by 2 GB sticks According to CPU-Z, my memory type is DDR3 (not sure how reliable that is) Full CPU-Z dump Windows 7 64-bit So basically, I want to know whether it's possible to extend my current RAM to get 8 GB total by buying another 4, and if so, what kind of RAM do I need? Note that I am not looking for shopping recommendations. I'm worried about the hardware compatibility.

    Read the article

  • Will an SSD help prevent laptop overheating?

    - by alex
    My laptop has a severe overheating problem, even though it's quite new (< 6 month). It's still regularly overheating to the point where it shuts down. This usually happens while playing games but sometimes while watching videos or using Skype video calls for a long time. I'm already keeping it mid-air on a cooling tray with 2 external coolers, but that doesn't seem to help. The only other thing I can think of is installing an SSD instead of the current HDD. I've read up that they generate less heat then hard drives, but can it actually make a serious difference to the heat level of the laptop? If there are any other suggestions, please feel free to comment. The laptop is a Toshiba Satellite L650D-11R.

    Read the article

  • How to reduce Fedora's disk size in VMware player.

    - by user428862
    I'm new to Fedora 14, vmware player. After getting Fedora up and running in VMware player. The disk size was 2.7 GB. After three hours of working with it, the disk size has bloated to 4.3 GB. I havent added software to account for the near doubling in size. How do I reduce the size back to 2.7GB range or lower. Im new to Fedora and superuser controls. Im removing more software than adding software. Is this a VMWARE problem or Fedora problem?

    Read the article

  • Windows command FOR /F isn't working?

    - by Mark Ransom
    I'm trying to use the FOR command in Windows XP's command line. I have a file temp.txt with 3 lines: temp1 temp2 temp3 And I'm typing the following command at the prompt: for /F %p in (temp.txt) do echo Testing %p Nothing comes back. If I remove the /F parameter, the output is Testing temp.txt. As far as I can determine, I'm using the command exactly as it is documented by Microsoft. I've checked my registry to make sure Command Extensions are on, and even started a new shell with cmd /e:on to be doubly sure. What am I doing wrong? Yes, I was doing something wrong. The file temp.txt wasn't created from scratch, I just edited it to put in my test content. Unfortunately when I created the file the first time, I saved it with a UTF-8 marker at the front. Recreating the file as plain text solved the problem.

    Read the article

  • OEM sound card with no drivers or support

    - by randy
    I thought my sound card was going out so I bought a sound card online. Everything seemed to work ok, I do have sound. But after a few months, I noticed the extra software that downloaded with the sound card drivers didn't work. I ended up contacting creative and after a month of e-mail support, they asked for the serial number and/or model number. Their reply back was I had purchased an OEM sound card and they could not provide support for that, and informed me that that is why their drivers and software didn't work. They informed me that I had to contact the company that distributed the sound card and install their software. Is there anything I can do to find out who distributed this sound card, or is there anything I can do to get other features to work? I have 4 speakers and a sub but only 2 speakers produce sound. The only control I have is the volume. Creative's driver update program will find my sound card, download updates and even added software, but if I try to click on a downloaded program like Creative's Toolbox or Media Center, I get an error that it cannot find the devise. That is why I contacted creative in the first place. EDIT Thanks for the responses everyone. Here's an update. I thought I'd go thru my old computer stuff for my classes at school. I have a lot of old stuff saved, boxes and cables and stuff. I found the box the sound card came in. It looks like a box you'd buy at the store, like Best Buy or CompUSA. I worked with creative for such a long time, it went past the point of being able to return it to the junk online store this shipped from. The box did have an install CD, so I thought I'd start over to reinstall the drivers and software that shipped with the card. I noticed that the install would uninstall a program, then reinstall it. so I thought things were working out. But no good. Everything still works but the programs were still bad. I'd get an error trying to load them - not found. I'll look on the card the next time I get a chance and see if I can spot any kind of name on it.

    Read the article

  • Uuntu 9.10 will not boot

    - by Jim
    After an update yesterday my Dell X300 will only boot to a screen with an option to perform 2 memory tests. If I perform these tests, it will only go back to this same screen, offering a choice of memory test again, 86+ or 86+ serial console 115200. This screen is headed - GNU Grub version 1.97 beta 4. This is a full install on my hard drive. How can I get back to booting normally?

    Read the article

  • How to open the built-in task manager when it's replaced by Process Explorer?

    - by AgreeOrNot
    I want to open the built-in task manager with Process Explorer's Replace Task Manager option checked. I've tried: Running taskmgr.exe from the run dialog. PE was opened instead. Creating a copy of taskmgr.exe in the same folder. Then run it. The built-in task manager was opened, but not working properly(its window was blank). Creating a symbolic link (using mklink) of taskmgr.exe in the same folder. Then run it. PE was opened instead. Is there any other method I can try? Thanks.

    Read the article

  • How to output a simple network activity plot in console in Linux?

    - by Vi.
    There's tload that plots load average. There's iftop that network usage as bars. How to do something like this: # tcpdump -i eth0 --plot 'host 1.2.3.4' 13:45:03 | | 0 in 0 out 13:45:04 |O | 0 in 1MB out 13:45:05 |OOOI | 500 KB in 4MB out 13:45:06 |OIIII | 6MB in 1MB out 13:45:07 | | 0 in 0 out 13:45:08 |IIIIIIIIIIII | 53M in 0 out

    Read the article

  • Do control groups improve system performances?

    - by qdii
    According to this website, enabling cgroups in the kernel can boost performances by sharing resources in a better way. In particular, the conclusion states that:  Nevertheless, with a little trial and error, cgroups can help you improve the efficiency of your systems’ resource usage and avoid downtime due to overusage of a single service. Kernel seeds, however, recommend to deactivate them altogether. They say: Consider these [kernel] settings poison. They remain nothing but system slow-downs. They are all off by default [in the proposed kernel config file]. Who should I trust?

    Read the article

  • 2 identical PCs - can I swap a single hard drive between and expect Windows 7/XP to work?

    - by rgvcorley
    I currently work in 2 different locations, traveling between the 2 every few weeks or so. I currently have screens, kb, mouse etc... in both locations, so I just pick up my tower case when I want to move to the other location. However to make moving easier I was thinking of buying 2 tower cases with hot swappable drive bays on the front and installing identical hardware in each one. This would allow me to pull the drives out and just take them with me and plug them into the PC at the other location. Would windows 7 complain? I'm not fussed about buying licenses for both PCs, but would I have any problems with drivers due to the different serial numbers of the components?

    Read the article

  • Automatically save attachments from mail on a network drive

    - by user269646
    Every morning I receive an automatically generated e-mail from a server, it includes a spreadsheet attachment. I made a rule in outlook that captures these emails. Now, I would like to make a macro to rename the attached file (. Xls) to =today() and saves it in a folder on a network drive. This macro must run every weekday at 8:00. I've made a lot of VBA in Excel, but have no experience in outlook. Might this be possible? And does anyone know how to do it? Kind regards Staal

    Read the article

< Previous Page | 2035 2036 2037 2038 2039 2040 2041 2042 2043 2044 2045 2046  | Next Page >