Search Results

Search found 8731 results on 350 pages for 'l core'.

Page 204/350 | < Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >

• Hyper-V and host-installed hardware devices: can guest VMs access?

  - by gravyface

  Have a couple of servers I'd like to setup as Hyper-V Servers, with a couple of Windows 2008 Standard VMs. On the host, we have a few hardware devices we'd like to be accessible to the guest; I'm not sure if these are supported via a raw "pass-thru" on Hyper-V (which I don't have alot of experience with) if the same drivers are installed on the guest. Hardware in question is a Brooktrout fax card, a SCSI adapter for the tape drive, and a 9-pin serial connected to one of the core firewalls for management.

  Read the article

• Another "Trouble copying music files from HD to 16GB thumb drive"

  - by Ron

  I have a brand new HP Quad Core - 6GB Ram - running 64-bit Windows 7. Running Norton Internet 2010. I try copying music files from HD to 16 GB thumbdrive and get blue screen after a few files have transfered over to thumbdrive. Computer blinks once and boom - blue screen and then reboots. This is really aggravating. I stopped anti-virus, pulled other USB attached devices - still does same thing. Any solutions out there?

  Read the article

• How do you pick what server setup you need?

  - by ed209

  I recently started receiving pubsub data feed from etsy. It averages around 250 notifications per minute. But obviously, when the USA wakes up that spikes quite heavily. I want to be able to deal with those spikes (about 3 per day) but the rest of day is fine. What's the best method of getting the right server configuration. My current approach is to keep upgrading until the server stops dying... next leap is: Processor: AMD Phenom II X6-1055T HEXA Core RAM: 4GB DDR2 SDRAM HD1: SATA Drive (7,200 rpm) (+500 GB 7200 RPM SATA hard drive) HD2: SATA Backup Drive (+500 GB SATA (7,200 rpm)) OS: Linux OS (+CentOS 5 64-bit) Bandwidth: 6000GB Monthly Transfer (3000 in + 3000 out) (+100M uplink port) What's the best approach to working out what sort of server setup you need?

  Read the article

• Audio problems with asus notebook with Bluetooth and usb devices in win 7

  - by QuickSilver

  My notebook is Asus P53E - core i5 Windows 7 installed Audio from PC speakers and headphone is distorted when i turn on bluetooth or some usb device plugged in. I belive this is a software issue. I tried updating my audio drivers but nothing help. Any help will be appreciated. Update: After a few days digging I found that this problem is causing by the asus sound enhancement application SonicFocus. The distortion stops while turning off sonic focus. Can anyone help me with a solution other than turning off SonicFocus

  Read the article

• Justification of Amazon EC2 Performance

  - by Adroidist

  I have a .jar file that represents a server which receives over TCP an image in bytes (of size at most 500 kb) and writes it file. It then sobels this image and sends it over TCP socket to the client side. I ran it on my laptop and it was very fast. But when I put it on Amazon EC2 server m1.large instance, i found out it is very slow - around 10 times slower. It might be the inefficiency in the code algorithm but in fact my code is nothing but receive image (like any byte file) run the sobel algorithm and send. I have the following questions: 1- Is it normal performance of Amazon EC2 server- I have read the following links link1 and link2 2- Even if the code is not that efficient, the server is finally handling a very low load (just one client), does the "inefficient" code justify such performance? 3- My laptop is dual core only...Why would the amazon ec2 server have worse performance that my laptop? How is this explained? Excuse me for my ignorance.

  Read the article

• Snow Leopard Hangs at Login Window

  - by jessecurry

  I've had an issue for the past few months, but I rarely restart so it hasn't caused too much trouble. Basically, when I start up my Mac (iMac10,1 - 3.06GHz Intel Core 2 Duo, OS X 10.6.3) everything proceeds as usual until I reach the login window. The login window displays normally, but keyboard and mouse input seem to be ignored. This condition persists for around 5 minutes at which time everything goes back to normal. While the login window is frozen my second monitor appears entirely blue, the second monitor receives a background as soon as the login window becomes responsive. If I startup while holding SHIFT the problem still occurs, but the freeze is much shorter. Looking through my logs I see no activity during the time that the login window is frozen. I've attempted to repair disk permissions, and gone through every possible maintenance option in Cocktail.

  Read the article

• USB Hub powers down in sleep mode on Win 7 64

  - by Andy B

  This question has been asked before but not answered. I would like the USB hub to remain on in sleep so I can wake up the laptop from an external keyboard and mouse. I have set all the device drivers by unchecking allow this device to be powered down and disabled selective suspend in control panel but the hub still powers down. If I plug a keyboard or mouse directly in to the PC they remain powered and wake the computer its only when they are connected through the hub there is a problem. I have another PC running Win 7 32. If I set this up in exactly the same way the hub remains powered in sleep. Both PC's are Toshiba Satellites with multi-core celerons but one runs Win 7 32 the other Win 7 64. BIOS settings are the same. Any help would be appreciated even confirmation that this is a feature of Win 7 64.

  Read the article

• Bad HD video deinterlacing processing

  - by Guy Fawkes

  I have Ubuntu 12.04 32-bit with Unity. My system configuration is: CPU: Core 2 Quad Q6600 (2.4 GHz) RAM: 8192 Mb DDR2 Kingston Video: Palit GeForce GTX 260 216 SP, and my screen resolution is 1680x1050. I also have Window 7 Ulitimate installed, and I can see the same files in Media Player Classic without any horizontal lines. I've installed vdpau driver, NVIDIA drivers 304.51, and MPlayer 2 (within SMPlayer). I've disabled "Sync to VBlank" option in CCSM (because in other way, by default, MPlayer process use about 50-60 percents of my processor load), tried to swich between different deinterlace options in SMPlayer, used "-vc ffh264vdpau,ffmpeg12vdpau" (without quotes) parameters for MPlayer, switched to "Ubuntu 2D", but, finally, have no results. Any suggestions? How must I to set up MPlayer?

  Read the article

• JAVA vs .NET Technology - Way 2 go Futher

  - by Sarang

  I have my subject .net acedemically. I also learned core-java and did a project as well. I took training from a java firm. Now, as a skill I do have knowledge as both language. But, it is creating a large problem to me that, which field I should chhose? Even if having better OOP funda, will it be easier for me to transfer from one-another in future ? Please suggest me a way. Also, we do have may technologies available at both side, like JSP, JSF, J2ME, Share Point, SilverLight etc. Which is better as per their reliabity point of view? Which are fast growing and useful technologies used mostly in current IT corporate world ? Are they easier to learn at fresher's point of view? Please answer. Perhaps, this answer may help me mostly to create my way to learn them and go further.

  Read the article

• safari 5 doesnt work on my computer.

  - by Amairani409

  I just got the new version of safari y downloaded because my mac tell me there was new version that I should be getting. but when I try to run my this new version of the aplication .nothing happends¡ I mean the program seems to be working but nothing apears in the screen and so when I try to see my top sites a little window show up but it just dont show anything. then 3 seconds later the program shut down¡ I dont know why is happening this Im not so a expert in computers but this really is away of all I see on safari and on mac I got Mac OS X version 10.5.8 2.66ghz intel core 2 duo 4gb 1067 MHz DDR3

  Read the article

• Hyper-V and host-installed hardware devices: can guest VMs access?

  - by gravyface

  Have a couple of servers I'd like to setup as Hyper-V Servers, with a couple of Windows 2008 Standard VMs. On the host, we have a few hardware devices we'd like to be accessible to the guest; I'm not sure if these are supported via a raw "pass-thru" on Hyper-V (which I don't have a lot of experience with) if the same drivers are installed on the guest. Hardware in question is a Brooktrout fax card, a SCSI adapter for the tape drive, and a 9-pin serial connected to one of the core firewalls for management.

  Read the article

• BSOD after PC has been running for a while

  - by user1389999

  I'm having a problem where my computer is getting a blue screen. I have noticed that the BSOD happens after the PC has been running for about 2 days. The BSOD's seem to be an error with atikmpag.sys with an error code of 0x00000116. The problem started about a month ago.It has happened all five times that I left my computer on that long in the past month. Because my computer is a pre-built one from Dell, and I had upgraded the graphics card (at least a year ago) to a more demanding one, I replaced the stock 360W power supply that came with it. I replaced it with a more powerful, 680W one, because it seemed like the problem could be related to a lack of power supply wattage, but it didn't affect the problem at all. Here are the minidump files for the five BSOD's that I have experienced: https://dl.dropbox.com/u/3488338/bsoddumps.zip System info: Windows 7 Home Premium x64 Dell Studio XPS 435MT Radeon HD 5670 (Version 12.4 of the Catalyst driver) Intel Core i7 920 2.67 GHz 6GB of RAM

  Read the article

• Uncorrectable machine check

  - by GregC

  I am experiencing rare but real unrecoverable machine checks on HP DL370 G6 dual-core Xeon server. I ran memtest86+ before, and ran CPU-intensive operations without any problems. In your opinion, does this indicate a real problem, or is it normal and expected behavior? How would you approach this problem? EDIT after some troubleshooting, it seems that these machine checks, as well as problems when showing device manager can be traced back to NC375i NICs. All is well when the NICs are not in the server. Further improvements to stability of HP Gen6 with Intel Xeon have been brought in with BIOS update in September 2013 HP Update DVD. Intel's newer microcode makes these CPUs much more stable. We haven't seen hardware-related BSODs since the update in September.

  Read the article

• Cisco NAC: help with enabling FTP or moving update files

  - by kyoung

  Hi, So this is a LINUX question, and a Cisco NAC question. I'm trying to update our server from 4.1 to 4.7, and i need to move some tarball files to the NAC. the NAC Appliance runs some strange stripped down version of Fedora Core 4 copying the upgrade: The instructions say to FTP the file to the NAC appliance, however whenever i use WinSCP with root credentials, i get a notice informing me the connection was actively refused. I can't for the life of me find any .conf files that sound like winners, so I don't know how to change the settings, however the ftp command does seem to work. what exactly should I do here?

  Read the article

• Video/Image processing on Apple iPhone4 [closed]

  - by goldenmean

  Hello, I know apple iPhone4 support H.264 and MPEG-4 as the supported video codecs, and JPEG,M-JPEG as image codecs. I was looking to get some information on Apple iPhone4 Video, Image Codec and Processing Chips/SoC parts. 1] Does anyone know, Which vendor provides the SoC's to enable this image / video compression and processing solutions in iPhone4. 2] Are the video/image codec solutions - 'Software codecs' on a specialized dsp-core/processor or hard wired as in a FPGA/ASIC solution. Any pointers would be useful. thank you. -AD.

  Read the article

• Apache Request IP Based Security

  - by connec

  I run an Apache server on my home system that I've made available over the internet as I'm not always at my home system. Naturally I don't want all my home server files public, so until now I've simply had: Order allow, deny Deny from all Allow from 127.0.0.1 in my core configuration and just Allow from all in the htaccess of any directories I wanted publicly viewable. However I've decided a better system would be to centralise all the access control and just require authentication (HTTP basic) for requests not to 127.0.0.1/localhost. Is this achievable with Apache/modules? If so how would I go about it? Cheers.

  Read the article

• High Load average threshold in linux

  - by user2481010

  My one of friend said that his server load average sometime goes above 500-1000, for me it is strange value because I never saw load average more than 10. I asked him give me some snapshot of top and memory usages, he gave following details: TOP USAGES top - 06:06:03 up 117 days, 23:02, 2 users, load average: 147.37, 44.57, 15.95 Tasks: 116 total, 2 running, 113 sleeping, 0 stopped, 1 zombie Cpu(s): 16.6%us, 6.9%sy, 0.0%ni, 9.2%id, 66.5%wa, 0.0%hi, 0.8%si, 0.0%st Mem: 8161648k total, 7779528k used, 382120k free, 3296k buffers Swap: 5242872k total, 1293072k used, 3949800k free, 168660k cached Free $ free -gt total used free shared buffers cached Mem: 7 6 1 0 0 4 -/+ buffers/cache: 1 5 Swap: 4 0 4 Total: 12 6 6 Total cpu $ nproc 8 my question is it possible load average more than 100 on 8 core,12 GB mem Server? because I read many tutorial,article on load average, it said that thumb rule is "number of cores = max load" according to thumb rule here is max load average 16 then how his server running with 147.37 load server? he said that it is least value (147.37) some time goes more than 500.

  Read the article

• Will this RAM work well in an iMac?

  - by sala_7

  I want to increase the RAM of my 2.4GHz Intel Core 2 Duo 24" iMac. I currently have 1GB of RAM DDR2 SDRAM 667 MHz. I really want to upgrade, but know nothing about RAM or hardware in general... These are the cards I found: http://www.crucial.com/eu/store/mpartspecs.aspx?mtbpoid=D4B6F603A5CA7304 Are these of quality or should I look at something else? Finally, I have 800MHz of Bus speed, couldn't I get faster RAM? Thanks for taking the time to read, and hoping you take the time to answer.

  Read the article

• Pause Nagios reloading in web interface

  - by 2rec

  Is there any option how could I turn off reloading of web page in Nagios web interface? Many times I checked many services and I needed the webpage to stay static and don't reload. One solution come to my mind - turn off the whole reloading for a while. Problem is that other people are using it too and they may want it at the time I don't want it. If anybody know about any kind of workaround or solution, please don't hesitate to write an answer. ;-) EDIT (+ reaction to the first answer): Maybe there could be a better way how to do it instead of modyfying nagios core. Interesting is, that I tried to disable javascript, it refreshed. I tried to disable http refreshing, it refreshed anyway. Has anybody know how and where is the refresh implemented?

  Read the article

• Package temperature above threshold, cpu clock throttled

  - by drN

  I am running 64 bit Ubuntu 11.10 on an i7 with 8gigs of ram. I thought of putting this on askubuntu.com but decided that maybe the question has a much broader appeal. I have the following error message popping up when I run math simulations. CPUn: Core temperature above threshold, cpu clock throttled (total events = xxxxxxx) CPUn: Package temperature above threshold, cpu clock throttled (total events = xxxxxxx) I realize that this is a hardware warning message (machine check exception, correct me if I am wrong). How do I turn these messages off? Since it doesn't seem to have a detrimental effect of my calculations or my computer (presumably), I don't like it cluttering up my virtual console screen with hundreds of these messages.

  Read the article

• Why Java applicaiton is running slow for clients on Linux

  - by Darshani

  We have two linux servers which have Apache Tomcat Installed. One is running the Database, the other is running with Java application. More than 100 users are connected to the servers. Server machines are quad core normal PC's which have 4 GB memory. It was running properly for the last 6 months but the application has recently started to run slowly . Suddenly the Java application is getting stuck & users cannot work for some time. There is no network issue. I am trying to identify the reason for this, whether it is a machine problem or the problem is in the Java application. Can any body help me with this?

  Read the article

• Mouse Hang with voltage fluctuation

  - by user265495

  I bought a new assembled PC about a month ago, but for the past 7 or 8 days I found my mouse cursor hangs every time there is a voltage fluctuation on my UPS (I guess it as when sound comes from ups then mouse hang for 2 or 3 sec. and them it goes normal again). My PC also seems to shut down while I'm working and it refuses to boot again - I end up needing to switch off my UPS and press and hold the power button for 30 seconds. It will then boot as per normal. Could the trouble be with my PSU? Am I potentially damaging my computer by pressing and holding the power button? I have : Motheboard : intel Chipset Model - DH61WWAAG23116-303 Processor : Intel Core i3 3.20 Ghz RAM : Zion 4 gb DDR3 HDD : 1 tb GRAPHICS : 2 gb NVIDIA GeForce GT-610 CABINET : Frontech Rock OS : Win 7 32 Bit

  Read the article

• what to use instead of laptop-mode?

  - by playcat

  hello, i have ubuntu 10.10 64bit on hp 6735s (turion processor). it overheats, and i'm forced to use turion power control in order to keep core temperature to a reasonable level. one more measure that i use is putting my processors to conservative mode. that way, i'm perfectly happy with its performance, and heat is where it should be. however, after my latest upgrade, something happened - cores are back to ondemand by default, and i'm not sure if turionpowercontrol is working any more (ps axu | grep urion shows no process). in addition, i read somewhere that laptop-mode uses hdd spindown for preserving data/energy, and that hdds have only a limited amount of those spindowns, so laptop-mode usage can actually shorten the life of my hdd. i'm wondering if there is a good way to set my cores to automatically go to conservative mode? also, what's the good way to see what is the voltage my cores use? on windows i use cpuz tools. thx and sorry for the long explanation.

  Read the article

• Unauthorized access error to html pages in IIS 7.0

  - by George2

  I am using VSTS 2008 + C# + .Net 3.5 + IIS 7.0. I have created a new web site and put an html file into the directory. And when I use browse function in IIS manager to browse the html file, I met with the following error, any ideas what is wrong? BTW: I am very confused about unauthorized error since I run the worker process under administrator account. From the error message, I am confused why the logon method is anonymous and not using administrator account? HTTP Error 401.3 - Unauthorized You do not have permission to view this directory or page because of the access control list (ACL) configuration or encryption settings for this resource on the Web server. Module IIS Web Core Notification AuthenticateRequest Handler StaticFile Error Code 0x80070005 Requested URL http://localhost:80/a.html Physical Path C:\test\simplehosttest\a.html Logon Method Anonymous Logon User Anonymous thanks in advance, George

  Read the article

• Is it safe to compress my Windows 7 %USERPROFILE%\AppData folder?

  - by Kev

  Having just read Scott Hanselman's latest blog entry, Guide to Freeing up Disk Space under Windows 7, he suggests turning on NTFS compression which I already do for a number of less travelled folders that contain static files such as downloads or images. However I am wondering if it's wise to turn on NTFS compression for the whole of my %USERPROFILE%\AppData folder? My system drive is a 128 GB SSD residing in a Dell Precision T5400 3Ghz Quad Core Xeon workstation so I ought not to notice the extra cycles used to compress and decompress files on their way to and from the disk. However would there be any good reasons not to do this? In fact could I safely compress the whole of my %USERPROFILE% folder?

  Read the article

< Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >