Search Results

Search found 9128 results on 366 pages for 'hardware infrastructure'.

Page 223/366 | < Previous Page | 219 220 221 222 223 224 225 226 227 228 229 230  | Next Page >

• Barriers to IPv6 deployment: addressing

  - by sysadmin1138

  There are several things that are keeping IPv6 deployment from being a topic of active discussion here at my work. There are the usual technical issues, but one non-technical one appears to be a major stumbling block on the path to actually getting a deployment project going. Addresses, memorizing of. Specifically, IPv4 addresses are comprehensible, and IPv6 addresses just look like a big long string of hex. The human mind has real trouble memorizing lists of more than 7-8 items, and an IPv4 address (192.168.231.148) has four items in it which makes it easy for us to memorize. A fully populated IPv6 address has not only 8 sections, but each section has 4 hex digits in it. IPv6 addresses were not designed for memorization. To the technician who knows that the DNS server is at 192.168.42.42 (or more likely "42.42", since the company prefix is likely memorized), the idea of memorizing an IPv6 address fills them with dread. Which in turn makes them much less enthusiastic about participating in an IPv6 deployment project. Because of how our network works we're not fully dynamic in terms of v4 addressing. We have several to many subnets that are entirely statically assigned for a variety of reasons, chief among them being that the overhead of static DHCP assignments is perceived as being too great. Also, some devices still aren't smart enough to pull DNS addresses out of DHCP while also having a static assignment, and therefore require manually configured DNS settings. Therefore, some v6 address memorization will have to be done. We're not under any mandate to get v6 out the door, so we don't have pressure from the top. However, it is time to start prepping our infrastructure to handle IPv6 even if we don't convert wholesale. For those of you who have been in IPv6-land for a while, what short-cut methods do you use to discuss or keep track of subnets and specific/critical IP addresses? If I can help reduce some of the dread surrounding IPv6 we might get the project going.

  Read the article

• EMC VNX iSCSI setup - unsure about SP/port assignment

  - by pauska

  We have a new VNX5300 waiting to get configured, and I need to plan out the network infrastructure before the EMC tech arrives. It has 4x1gbit iSCSI per SP (8 ports in total), and I'd like to get the most out of the performance until we jump over to 10gig iSCSI. From what I can read from the docs - the recommendation is to use only two ports per SP, with 1 active and 1 passive. Why is this? It seems kind of pointless to have quad-port i/o-modules and then recommend to not use more than two of them? Also - I'm a bit unsure about the zoning. The best practices guide state that you should separate each port on each SP from each other on different logical networks. Does this mean that I have to create 4 logical networks to be able to use all 8 ports? It also gives the following example: Does this mean that A0 and B0 should sit on the same physical switch aswell? Won't this make all traffic go on one switch (if both A1 and B1 are passive)? Edit: Another brainpuzzle I don't get it - each host (as in server) should not have more iSCSI bandwidth available than the storage processor. What on earth does this matter? If serverA have 1gbit and serverB have 100mbit, then the resulting bandwith between them is 100mbit. How can this result in some kind of oversubscription? Edit4: Wait, what. Active and passive ports? The VNX runs in a ALUA configuration with asymmetrical active/active.. there shouldn't be any passive ports, only preferred ones..

  Read the article

• Can't ping guest OS from Windows XP SP3 host running VIC.

  - by Vittal

  Hi, I am running VMware ESX Server 3i Version 3.5.0 and accessing this server using VMware Infrastructure Client Version 2.5.0 on a Windows XP SP3 machine. I have enabled the Microsoft TCP/IP version 6 stack and assigned an IPv6 address (using the netsh command) to the network adapter. The guest OS'es running on ESX Server (includes Win7, W2K8, WinXP) also have IPv6 addresses enabled on their adapters. The adapters are configured to be in VM Network (Bridged mode) and hence have connectivity to the Internet. The VMs are able to ping each other using IPv6 addresses and are also able to ping a physical Win7 machine using IPv6 addresses. However, the Windows XP SP3 machine on which the Client is running is not able to ping any hosts running on ESX Server while the VMs are able to ping this host. Whenever I try to ping from WXP box I get the "Invalid source route specified." error. The WinXP machine is not able to ping the Win7 physical machine too (the same error as above is thrown). Can someone help me understand why I am receiving this error and what I need to do to resolve this error? Thanks, Vittal

  Read the article

• How to organize deployment process in Chef-controlled environment?

  - by Alex

  I have a web Linux-based infrastructure which consists of 15 virtual machines and over 50 various services. It is fully controlled by Chef. Most of the services are developed internally. Basically the current deployment process is triggered by a shell script. A build system (a mix of Python and shell scripts) packages the services as .deb files and puts these packages into a repo. It runs apt-get update on all 15 nodes then because the standard Chef apt cookbook only runs apt-get once per day and we definitely do not want to run apt-get update unconditionally on each chef-client wake. The build system restarts chef-client daemons on all 15 nodes finally (we need this step because of pull Chef nature). The current process has a number of drawbacks we want to address. First off, it is asynchronous because the deployment script does not check chef-client logs after restart so we don't even know if the deployment was successful. It does not even wait for Chef clients to complete the cycle. Second, we definitely do not want to force chef-client restarts on all nodes because we usually deploy only a small number of packages. And third, I am not quite sure using chef-client for deployment is legitimate, probably we are just doing it wrong from the start. Please share your thoughts/experience.

  Read the article

• Does my Oracle DBA need root access?

  - by Dr I

  I'm currently discussing with my Oracle DBA Collegue that request a root access on our production servers. I'm not so hot to let him use the root access on our production servers. He is arguing that he need it to perform some operations like restarting the server and some other obscure arguments. The point is that I'm not agree with him because I've set him a Oracle user/group and a dba group where Oracle user belong. Everything is running smoothy and without any root permissions for now. I also think that all administrative tasks like scheduled server restart and so one need to be operated by the proper administrator (The Systems administrator on our case) to avoid any kind of issues related to a misunderstanding of the infrastructure interactions. So, I need the help of both, sysadmins and Oracle DBAs to lead me on the correct direction. If my collegue really need this rights I'll give him, but I'm just basically quite affraid of that because of security and integrity concerns. I know that my collegue is really good as a Oracle DBA and he know is work very well, but I also know that I've very few cases where a software and its admin really need root access. Once again, I'm not looking for pros/cons but rather an advice on the way that I should take to deal with this situation.

  Read the article

• Automated Linux VMs on Hyper-V 2012

  - by Mick

  I have a requirement to create a ton of linux VMs for our customers (we run managed infrastructure) on Hyper-V 2012 in the coming months and I have an issue with automating it. Here is how I need it to work: User accesses their web page and creates a VM. VM is created with a unique IP and name User logs in over SSH I know Hyper-V quite well and can work with powershell and am a C# programmer so the development side of things is taken care of. I also know enough about Linux to be at least competent: I have used it on and off for a number of years but not done anything Enterprise-level with it. All this can be done easily by manual processes but I need to be able to script or program this to automate it as there could be hundreds of them being created but I don't know how. My first thought is to have a database with random-generated names and IPs already created but I don't know how to get a Linux VM to boot up and grab one from the database... I suppose a Kickstart script would take care of it but I don't know what to do from there. Here is what is bouncing around in my head: Create a std linux build. - Easy to do Someone clicks "Create VM" and I pull a name and IP from the database and write it to a kickstart script. - Easy to do I could then open the template VHDX file and copy in the script and then save it. - Not sure if possible User boots up new VM and the kickstart script gives it the name and IP I assigned it. My problem is that I don't know how to open a VHDX file and insert a kickstart script into it... can't figure it out. I am reaching here and this solution may be miles off... I am more used to creating Windows VMs with scripts and so on which i am more familiar with... any help would be appreciated. Thanks Mick

  Read the article

• SharePoint 2010 Enterprise wiki - [New page] missing

  - by icelava

  I am trying to ramp up knowledge on SharePoint deployment and usage (never did before), due to a direction to use SharePoint 2010 as a repository platform (wiki format) for our customer's infrastructure documentation. In my test virtual server, a new site of Enterprise wiki template was setup. Went into Site Actions Manage Site Features to activate Wiki Page Home Page. The default sub-web then went from /Pages to /SitePages and looks like the default Team template. The odd thing is the Site Actions is missing the New Page option. My colleague does not understand why this is the case, as it ought to be there. The original /Pages sub-web does have the option. What conditions are in play that influences the appearance of that option? UPDATE Another phenomenon observed is in the Site Actions View All Site Content view, the wiki document libraries listed in the grid will have their hyperlink (e.g. "Site Pages") lead straight to the direct default page. It would not show its own table listing of pages under that document library, unlike the original Pages document library, which expectedly show up as a listing. I wonder if this hints to any problems.

  Read the article

• XP/Intel wirelss only showing 'hpsetup' ad-hoc network that isn't there

  - by ewall

  Trying to help my friend with her work XP laptop, which recently stopped seeing any wireless SSIDs except the SSID 'hpsetup' (presumably from a wireless-enabled HP printer). Relevant information: The laptop is a Lenovo T500 (Centrino 2 chipset) with XP SP3. The network adapter is Intel WiFi Link 5300 AGN (built-in). The latest version (13.5) of the Intel drivers only are installed, not the Intel config software, so XP is using the Wireless Zero-Config manager. The wireless router is a NetGear WGR614 v7 with 802.11b/g. The SSID is broadcasting, and all the other laptops in the house can see and connect to it. On the laptop, I have tried repairing the network connection, disabling power management, turning off 802.11a & n radio, and more... but it didn't help. Some of the wireless settings are managed by Group Policy from her office (I get the "At least one of your changes was not applied successfully to your wireless configuration" message). It is enforced to connect to "Access point (infrastructure) networks only". The real kicker is that my laptop does not an SSID named 'hpsetup' here, but it can see several broadcasted SSIDs including the one we want, while my friend's laptop doesn't see any SSID except 'hpsetup'. Any suggestions?

  Read the article

• IIS 7.5 fails to open database after computer machine on that database server is working restarts.

  - by Jenea

  Hi. I decided to post this question also here in case the issues we have is related to sql server. There is a problem that bother me for some time. I have an asp.net mvc that uses NHibernate for modeling the database. The infrastructure is the following: Windows 2008 R2 for all virtual machines. IIS 7.5 is working on one virtual machine. Sql Server 2008 is working on another virtual machine. We have couple of databases, two that stores application data and one that registers all unhandled exceptions. Sometimes virtual machine that hosts database server restarts (in the middle of the night, not quite sure about the reason) after that connection to the databases that stores application data is not working and as result there are thousands of unhandled exceptions that get registered in the third database. Important to mention that databases are accessible from Management Studio. The problem is solved by resetting IIS. Connetion are handled via NHibernateUtil class which opens and closes session at each request.

  Read the article

• Method to integrate Powershell scripts with non-Windows workflow?

  - by Matt Simmons

  I love the smell of new machines in the morning. I'm automating a machine creation workflow that involves several separate systems across my infrastructure, some of which involve 15 year old perl scripts on Solaris hosts, PXE Booting Linux systems, and Powershell on Windows Server 2008. I can script each of the individual parts, and integrating the Linux and Unix automation is fairly straightforward, but I'm at a loss as to how to reliably tie together the Powershell scripts to the rest of the processes. I would prefer if the process began on a Linux host, since I imagine that it will end up as a web application living on an Apache server, but if it needs to begin on Windows, I am hesitantly okay with that. I would ideally like something along the lines of psexec for Linux to run against Windows, but the answer in that direction appears to by Cygwin, and as much as I appreciate all of the hard work that they put in, it has never felt right, if you know what I mean. It's great for a desktop and gives a lot of functionality, but I feel like Windows servers should be treated like Windows servers and not bastardized Unix machines (which, incidentally, is my argument against OSX servers, too, and they're actually Unix). Anyway, I don't want to go with Cygwin unless that's the last and only option. So I guess what I'm asking is if there is a way to execute jobs on Windows machines from Linux. Without Cygwin. I'm open to ideas and suggestions, including "Look idiot, everyone uses Cygwin, so suck it up and deal with it". Thanks in advance!

  Read the article

• IPv6 Addresses causing Exchange Relay whitelists to fail

  - by makerofthings7

  Several of our new Exchange servers are failing to relay messages because it is communicating over IPv6 and not matching any receive connector I previously set up. I'm not sure how we are using IP6 since we only have a IPv4 network and we are routing across subnets. I discovered this by typing helo in from the source to the server that is confused by my IP6 address. I saw the IPv6 message and the custom message I gave this receive connector. (connectors with more permission have a different helo) 220 HUB01 client helo asdf 250 HUB01.nfp.com Hello [fe80::cd8:6087:7b1e:99d4%11] More info about my environment: I have two dedicated Exchange forests each with a distinct purpose. They have no trust and only communicate by SMTP. They both share the same DNS infrastructure via stub zones. What are my options? This is my guess, but I'm no IPv6 expert so I don't know which one is the best option Disable IPv6 Add the IPv6 address to the whitelist (isn't that IP dynamic?) Tell Exchange to use IPv4 instead Figure out why we are using IPv6 instead of IP4

  Read the article

• How can the route between two private IPs go via public IPs?

  - by Gilles

  I'm trying to understand what this output from traceroute means. I changed the IP addresses for privacy but retained the public/private IP range distinction. traceroute.db -e -n 10.1.1.9 traceroute to (10.1.1.9), 30 hops max, 60 byte packets 1 10.0.0.1 0.596 ms 0.588 ms 0.577 ms 2 10.0.0.2 1.032 ms 1.029 ms 1.084 ms 3 10.0.0.3 3.360 ms 3.355 ms 3.338 ms 4 23.0.0.4 3.974 ms 4.592 ms 4.584 ms 5 23.0.0.5 13.442 ms 13.445 ms 13.434 ms 6 45.0.0.6 13.195 ms 12.924 ms 12.913 ms 7 67.0.0.7 52.088 ms 51.683 ms 52.040 ms 8 10.1.1.8 46.878 ms 44.575 ms 44.815 ms 9 10.1.1.9 45.932 ms 45.603 ms 45.593 ms The first 10.0.* range is inside my organisation. The last 10.1.* range is another site of my organisation. The intermediate addresses belong to various ISPs. I expect that there is some kind of VPN between the two sites, but I don't know much about our network topology. What I don't understand is how the route can go from a private address through public addresses back into private addresses. Searching led me to Public IPs on MPLS Traceroute, which gives a possible explanation: MPLS. Is MPLS the only possible or most likely explanation? Otherwise what does this tell me about our network infrastructure? Bonus question for my edification: in this scenario, who is generating the ICMP TTL exceeded packets and if relevant mangling their source and destination addresses?

  Read the article

• Autounmounting USB keys with FAT filesystem on Linux (RHEL5)

  - by niXar

  For security reasons, I have two workstations i front of me, and I can only transfer data between them through a USB key. As you can imagine, it can get quickly tiresome, but the most annoying is having to unmount the things before removing them. Not umounting them results in missing files most of the time, even if I remove them a while after having last written to them. Now, since they're only used for transferring smallish files, and each are basically written once and read once, I don't need the fancy pansy caching infrastructure that makes clean unmounting a necessary step. And since the data is always a copy of something I have at hand, I don't care if the filesystem croaks from time to time. But anyway the system doesn't need to force that on me, it could simply make sure everything is committed with a second, and works synchronously. Then when I remove the key, nothing is lost. Is there a way to do this? I would appreciate any other tips on handling this situation. Edit: it appears the situation has changed between RHEL5 and Fedora up to F11 on one hand, and F12 on the other. The latter use DeviceKit-disk, and I haven't quite figured out how to do this. The method provided below in gconf does not work anymore.

  Read the article

• Looking for ballpark pricing on an affordable a Cisco VOIP solution for our office

  - by guytech

  We have about 8 incoming PSTN lines that are currently on an old and antiquated Nortel Meridian ICS system. This system has been giving us some grief. We're looking for a new VOIP solution. I've been looking at a Cisco solution and it does seem pricey but I'm sure effective. Unfortunately, we probably can't afford a Cisco Unified Communications 520 which seems to be the ideal solution. We have about 15 people who need an extension and voicemail. We really don't have any need for a fancy system just an auto attendant of some sort when people call us. It looks like we'll have to get an older router and an addon card for what we're looking for to get best value pricing. However, I don't know a a lot about Cisco voice products so I'm a bit lost as to what to get. The only thing I am sure on is the pricing on VOIP phones which we expect to be about ~$100-200. However, I'm not sure what pieces of VOIP infrastructure to get. Any advice? I am familiar with Asterisk but right now I'm looking on pricing concerning a Cisco solution.

  Read the article

• Does a VPN requirement kill the concept of having a Web Application in the Cloud?

  - by Christian

  Recently I posted a question in SO, but so far I got no answers. I wonder if I'm asking the wrong question. This is the problem: We need to design an application which offers a public http web service, but at the same time it must consume some services through a VPN connection from other existing company. There is no other alternative but to use a VPN connection to access those services. We want to host our application in some cloud infrastructure like Heroku or Amazon EC2. But there is no direct way to access the VPN services of the other company from there. The solution I'm thinking, but I don't like is to have a different server to expose the services from that VPN. But this will require the setup of another server which I prefer to avoid. In the case this is the solution, can I use an Amazon EC2 instance to connect to a VPN? This is what I was thinking, is it correct? I don't have experience using VPNs, tunnels or those kind of networking stuff. I will really appreciate if you can propose me an alternative solution, or just give me a comment.

  Read the article

• Technology mash: is this possible?

  - by Jon Story

  I'm in the process of setting up my own DNS+hosting on a couple of VPS and my home machines, mostly for academic/learning purposes, but also for convenient accessing of my files, hosting my personal websites, private git repositories etc. I've got a main web server with DNS, and a slave DNS server. I've also got a couple of machines at home doing file hosting, video streaming and all that fun stuff. I'm intending to use my VPS's to provide myself with a dynamic DNS system so that I can point mydomain.com at my DNS servers, with home.mydomain.com going into my home network via a raspberry pi. HOWEVER.... I've not got access to the network infrastructure at home (rented accommodation with managed internet), so I can't forward the ports on the router to my own machines. As such, I'm wondering if it's possible to route all the traffic via an SSH/HTTP tunnel through one of the VPS? My plan is to have the raspberry pi provide a VPN into my home network. The raspberry pi uses SSH to connect to the VPS, and the VPS forwards any traffic to home.mydomain.com via the tunnel to the raspberry pi. Is this even possible, and how do I go about it? I don't mind getting my hands dirty with coding and low level tools, I'm just not sure where to start or what the best way to go about it is.

  Read the article

• Are there any viable DNS or LDAP alternatives for distributed key/value storage and retrieval?

  - by makerofthings7

  I'm working on a software app that needs distributed decentralized name resolution, and isn't bound to TCP/IP. Or more precisely, I need to store a "key" and look up it's value, and the key may be a string, a number, or any other realistic data type. Examples: With a phone number, look up a name. (or with an area code, redirect to the server that handles that exchange) With an IP Address get a DNS name, or a Whois contact (string value) With a string, get an IP, ( like a DNS TXT or SRV record). I'm thinking out of the box here and looking for any software that allows for this. (more info below) Are there any secure, scalable DNS alternatives that have gained notoriety? I could ask on StackOverflow, but think the infrastructure groups would have better insight on this. Edit More info: I'm looking at "Namecoin" the DNS version of Bitcoin, and since that project is faltering, I'm looking at alternative ways to store name-value pairs, with an optional qualifier. I think a name value pair is of global interest is useful, but on a limited scale. Namecoin tried to be too much, and ended up becoming nothing. I'm trying to solve that problem in researching alternatives and applying distributed technologies where applicable. Bitcoin/Namecoin offers a Distributed Hash Table, which has some positive aspects, but not useful for DNS, except for root servers.

  Read the article

• Did my registrar screw up or is this how name server propagation works?

  - by Brad

  So my company has a number of domains with a large registrar that shall go unnamed. We are making some changes to our DNS infrastructure and the first of those is we are moving our secondary DNS from one server on site to four servers offsite. So we updated the name servers for each domain at the registrar by removing the entry for the old secondary name server and adding the four new ones. I monitored the old secondary server for requests and when I saw no new requests had been made for 24 hours I shut it down. That was this morning. I assumed at this point everything was good. Unfortunately this was my mistake. I should have gone and made sure name servers at large were returning the correct NS records. So this afternoon we were performing maintenance on our primary DNS server and we shut it down. This is when I started getting alerts from our external monitoring. I checked and sure enough, the DNS server used there reported the only NS record for our primary domain was the primary name server. The new secondary servers were not listed and neither was the old secondary. Is it unreasonable of me to have assumed that because the update was from ns1.mydomain.com ns2.mydomain.com to ns1.mydomain.com ns1.backupdns.com ns2.backupdns.com ns3.backupdns.com ns4.backupdns.com in one step at the registrar that there should be no intermediate state where the only NS record was for ns1.mydomain.com? Going forward to be safe obviously I will always leave the old name servers alone until after I'm 100% sure the new ones have propagated and only then remove the old name servers from the registrar. However, I'd still like to know if my registrar screwed up or if my expectation was unreasonable.

  Read the article

• A router that supports connecting with 2 different wifi networks

  - by Allan Deamon

  I Have the following setup in one place: We have a small local ISP through wireless. I have a external parabolic antenna, connected to a external usb wifi radio, connected through USB to a desktop old PC. The pc connects do the ISP wiki network, then do a Dial Up (PPPoE) connection through the this wifi setup. This will expand with others mobiles devices to be used. When I need, I take my home wireless router and connect though Ethernet in the PC, which is shares the internet. The problem is that the PC must be always ON and working. I would like to buy a wireless router which could be an AP to the mobile devices, notebooks, etc, as also could connect to the ISP Wifi/PPPoE network. So, this device must: Have one radio with detachable antenna to connect to the external antenna. It must connect as client to a network and then dial up the PPP Have another radio serving as AP (infrastructure) to the local place This can't be very expensive. I found a candidate: ( http://www.tp-link.com/en/products/details/?categoryid=1682&model=TL-WR2543ND ) It have 3 deatachable antennas, working with dual band. Officially, his firmware doesn't support it. My supposition: If internally there is 3 or 2 distinct wlan ports (like wlan0, wlan1), and there is support, i could use a OpenWRT, DD-WRT or Tomato to make this works. It also have 1 USB port, which I cold use to connect my actual USB Wifi card on it instead to the old PC. Another alternative, is a router that can do this out of box, with the original firmware. But I don't think this is a easy thing to find.

  Read the article

• Recommended programming language for linux server management and web ui integration.

  - by Brendan Martens

  I am interested in making an in house web ui to ease some of the management tasks I face with administrating many servers; think Canonical's Landscape. This means doing things like, applying package updates simultaneously across servers, perhaps installing a custom .deb (I use ubuntu/debian.) Reviewing server logs, executing custom scripts, viewing status information for all my servers. I hope to be able to reuse existing command line tools instead of rewriting the exact same operations in a different language myself. I really want to develop something that allows me to continue managing on the ssh level but offers the power of a web interface for easily applying the same infrastructure wide changes. They should not be mutually exclusive. What are some recommended programming languages to use for doing this kind of development and tying it into a web ui? Why do you recommend the language(s) you do? I am not an experienced programmer, but view this as an opportunity to scratch some of my own itches as well as become a better programmer. I do not care specifically if one language is harder than another, but am more interested in picking the best tools for the job from the beginning. Feel free to recommend any existing projects except Landscape (not free,) Ebox (not entirely free, and more than I am looking for,) and webmin (I don't like it, feels clunky and does not integrate well with the "debian way" of maintaining a server, imo.) Thanks for any ideas!

  Read the article

• Possible Solution for Setting up a Linux VPN Server to Encrypt WLAN Traffic of Macs and iPhones on

  - by GorillaPatch

  I would like to set up a VPN server on debian linux to encrypt wireless traffic coming from my Mac or iOS device. I would like to use a certificate-based solution. Setting up a PKI infrastructure and managing certificates is OK for me. 1. Which server to pick? By looking through the internet and here on stackoverflow I found the following possible solutions: strongSwan IPSec and racoon Which solution is feasible for a linode running debian squeeze? 2. How to configure the network? If I understood correctly a VPN has a virtual network interface as an endpoint on the server side. Naively I would think that I need a DHCP server running on the server to assign a dynamic private IP (like of the class C network 192.168.xxx.xxx) to the connecting clients. Next I think I would need to set up masquerading to NAT the incoming VPN traffic to the real interface directly connected to the internet. Is this the right way to go? Do you have any configuration examples? I often saw VPN configurations used to connect to your home network, but that is not what I am looking for. I have a server up in the internet and want to use it as a proxy to encrypt traffic in insecure network environments like public WLANs.

  Read the article

• Connection failed between Windows Servers

  - by Kerby82

  I'm setting up an infrastructure based on Windows Server 2012. The firewall is turned off and I can't access the Domain controller to check for the group policy. I'm experiencing some connection problem between servers. All the servers are running a site on the TCP Port 80 and I check with netstat that the web server is binding on every Ip of the servers. If i try to telnet from the server itself on the port 80 it works (using DNS name) if I try same telnet from another machine I get connection failed. The DNS works, the ping is successfull, the servers are on the same subnet, the firewall is turned off (even though windows advanced firewall says that some settings can be managed by the System Administrator, i guess group policy). I don't know how to troubleshoot further. Do you have any idea? Is that possible that the FW looks turned off but there are some group policy blocking the connections? (I also check group policy-Administrative Template-Network Connections- Windows FW everything is not configured) I need some hint on how to keep troubleshooting such a problem.

  Read the article

• Incredble low disk performance on HP DL385 G7

  - by 3molo

  Hi, As a test of the Opteron processor family, I bought a HP DL385 G7 6128 with HP Smart Array P410i Controller - no memory. The machine has 20GB ram 2x146GB 15k rpm SAS + 2x250GB SATA2, both in Raid 1 configurations. I run Vmware ESXi 4.1. Problem: Even with one virtual machine only, tried Linux 2.6/Windows server 2008/Windows 7, the VMs' feel really sluggish. With windows 7, the vmware converter installation even timed out. Tried both SATA and SAS disks and SATA disks are nearly unsusable, while SAS disks feels extremely slow.I can't see a lot of disk activity in the infrastructure client, but I haven't been looking for causes or even tried diagnostics because I have a feeling that it's either because of the cheap raid controller - or simply because of the lack of memory for it. Despite the problems, I continued and installed a virtual machine that serves a key function, so it's not easy to take it down and run diagnostics. Would very much like to know what you guys have to say of it, is it more likely to be a problem with the controller/disks or is it low performance because of budget components? Thanks in advance,

  Read the article

• central apache log analysis of many hosts

  - by Jason Antman

  We have 30+ apache httpd servers, and are looking to perform analysis on the logs both for historical trending and near "real time" monitoring/alerting. I'm mainly interested in things like error rates (4xx/5xx), response time, overall request rate, etc. but it would also be very useful to pull out more compute-intensive statistics like unique client IPs and user agents per unit of time. I'm leaning towards building this as a centralized collector/server/storage, and am also considering the possibility of storing non-apache logs (i.e. general syslog, firewall logs, etc.) in the same system. Obviously a large part of this will probably have to be custom (at least the connection between pieces and the parsing/analysis we do), but I haven't been able to find much information on people who have done stuff like this, at least at shops smaller than Google/Facebook/etc. who can throw their log data into a hundred-node compute cluster and run Map/Reduce on it. The main things I'm looking for are: - All open source - Some way of collecting logs from apache machines that isn't too resource-intensive, and transports them relatively quickly over the network - Some way of storing them (NoSQL? key-value store?) on the backend, for a given amount of time (and then rolling them up into historical averages) - In the middle of this, a way of graphing in near-real-time (probably also with some statistical analysis on it) and hopefully alerting off of those graphs. Any suggestions/pointers/ideas, to either "products"/projects or descriptions of how other people do this would be greatly helpful. Unfortunately, we're not exactly a new-age-y devops shop, lots of old stuff, homogeneous infrastructure, and strained boxes.

  Read the article

• Issues connecting to HP ProCurve switches

  - by BriGuy

  We are having a very strange issue trying to connect to our infrastructure switches via SSH. When you first try connecting to them, the switches will prompt for the password - and then just sit there after it is entered. If you create a second SSH session to the switch (while letting the first one remain open and just sitting there) it will let you log right in. The switches are doing the same thing with RADIUS and local authentication. The other strange part to all of this, is that about 10 switches started doing it all at the same time. As far as actual configuration of the switches, nothing has changed. Occasionally, one switch will start working like normal, but then stop again. These are all HP ProCurve managed switches, but all different models/firmware. Some switches that are not working are using the same firmware as others that are working. UPDATE: 20130312 I am also seeing this same behavior when trying to use telnet. The first telnet session just hangs there, and the second telnet session will let me log in. Rebooting the switches seems to get them working, but I still have 5 production switches that cannot easily be rebooted because of their production roles. Is anyone aware of anything else that can be switched on/off that may reset the logon for remote management or something like that?

  Read the article

< Previous Page | 219 220 221 222 223 224 225 226 227 228 229 230  | Next Page >