Search Results

Search found 31254 results on 1251 pages for 'manual hunk edit mode'.

Page 237/1251 | < Previous Page | 233 234 235 236 237 238 239 240 241 242 243 244  | Next Page >

• diagnostic software for wifi adapter

  - by Nathan Fellman

  I'm having trouble with my wifi connection. Is there any software out there that can help me determine if the problem is in the drivers or in the hardware? Regretfully, I'm working on Vista Edit: The problem I'm having is that the Vista reports that the wireless radio is connected, shows an IP and all, the router also shows that the computer is connected, but there's no connectivity. I can't logon to the router, and I can't even ping it. When I ping it I get the response: General Failure I have tried connecting with and without various wireless security protocols. I have tried disabling the wireless adapter and re-enabling it from the Device Manager I have tried updating the driver None of this has helped. When I connect via Ethernet (with a cable, that is), everything works fine. Edit: I'm not using any firewall on the computer, that I'm aware of. The IP address for the WIFI adapter is similar to the one for the LAN adapter. They differ by one.

  Read the article

• How do I get rid of this drive mount confirmation question when booting the computer?

  - by Dave M G

  With help from this site, I was able to set up an SSHFS connection between two computers on my LAN so that one auto mounts on the other at boot time. Everything works, but there is this annoying confirmation that comes up whenever I boot: An error occurred while mounting /home/dave/Mythbuntu. Press S to skip mounting or M or Manual recovery If I press S, then booting continues, and my drive is mounted as hoped, so it seems like even though I "skipped" it, maybe it tried again and succeeded later in the boot process. I followed the instructions here to set up "if up / if down" scripts, and here is my current /etc/fstab: sshfs#[email protected]:/home/mythbuntu /home/dave/Mythbuntu fuse auto,users,exec,uid=1000,gid=1000,allow_other,reconnect,transform_symlinks,BatchMode=yes 0 0 Although the mounting is working, this step of having to press S every time I boot is obviously kind of a hassle. How do I configure my computer so I don't have to do that, and so that my other computer will still automount?

  Read the article

• Oracle Identity Manager ADF Customization

  - by Arda Eralp

  This blog entry includes an example about customization Oracle Identity Manager (OIM) Self Service screen. Before customization all users that can be logged in OIM Self Service can see "Administration" tab on left menu. On this example we create "Managers" role and only users that have managers role can see "Administration" tab. Step 1: Create "Manager" role  Step 2: Create Sandbox  Step 3: Customize ADF Select "Customize" on the top menu Select "Source" instead of "Design" on top  Select "Administration" tab with blue rectangle and edit component Edit "visible" with expression builder #{oimcontext.currentUser.roles['Manager'] != null} Apply Step 4: Apply to All and Publish sandbox Notes:  This table objects can use for expression. Objects Description #{oimcontext.currentUser['ATTRIBUTE_NAME']} #{oimcontext.currentUser['UDF_NAME']} #{oimcontext.currentUser.roles} #{oimcontext.currentUser.roles['SYSTEM ADMINISTRATORS'] != null} Boolean #{oimcontext.currentUser.adminRoles['OrclOIMSystemAdministrator'] != null} Boolean

  Read the article

• Building SANE from git-source produce backend missmatch on 12.04 even if built locally

  - by deinonychusaur

  It seems to me that with Ubuntu Precise Pangolin it is all but easy to do a proper install of SANE from source (git-repo). I've found other scanning issues trying to find an answer to this, where the output people posted seems to indicate they suffer the same issue (unknowingly). If I run on a fresh install of Ubuntu 12.04 with compiled SANE source from the git I get: $ scanimage -V scanimage (sane-backends) 1.0.24git; backend version 1.0.22 (I basically followed the instructions on http://ubuntuportal.com/2012/02/how-to-get-an-canon-canoscan-lide-100-scanner-to-work-in-ubuntu-11-10linux-mint-12.html since I didn't find any other information making sure that sane was not installed prior to installation.) My primary interest is the epson2-backend. In 1.0.22 it offers the wrong TPU settings for Epson V700 (TPU2-mode wasn't supported in 1.0.22, and the scanner is useless to me if I don't have the TPU2-support). Since if I ask it to enter transparency mode, it shows 1.0.22 behaviour, it implies that the epson2-backend comes from 1.0.22 and not 1.0.24 even though I just built it. If I install SANE with prefix to a local folder and run that version of scanimage it still produces the mismatch. However, on another computer where I installed a custom 1.0.22 build of SANE prior to upgrading to Ubuntu 12.04, I can build and install the same SANE-git locally and have it correctly match backends: $ ./SANE/bin/scanimage -V scanimage (sane-backends) 1.0.24git; backend version 1.0.24 $ scanimage -V scanimage (sane-backends) 1.0.22; backend version 1.0.22 On this computer the 1.0.24 works correctly in finding TPU2 on Epson V700. So what am I missing/doing wrong? (And I want to replace 1.0.22 with 1.0.24 for the whole system, the local build was just debugging.) Any help would be much appreciated. Edit 1: Just tried compiling SANE using this instruction on Ubuntu 10.04 and it worked like a charm. However, when I upgraded to 12.04 (really would like to run 12.04), SANE was downgraded to 1.0.22. When trying the same set of instructions on 12.04 I was still out of luck -- the backend missmatch was there again (and I do have libusb-dev installed) Edit 2: I updated to Ubuntu 12.10 which now has the 1.0.23 SANE drivers. I haven't dared trying to compile from source on 12.10 since 1.0.23 is good enough for me. This is just a work-around and I would still like to know what's up with Ubuntu 12.04.

  Read the article

• How to solve: "Connect to host some_hostname port 22: Connection timed out"

  - by Aufwind

  I have two Ubuntu machines. Both have openssh-client and openssh-server installed on them. ssh-ing from machine G (fresh Ubuntu 11.10 installation) to machine K works great. But ssh-ing from machine K to machine G results always in the Error: Connect to host some_hostname port 22: Connection timed out I went through the troubleshooting section of help.ubuntu.com and I got the following results: ps -A | grep sshd # results in 848 ? 00:00:00 sshd - sudo ss -lnp | grep sshd # results in 0 128 :::22 :::* users:(("sshd",848,4)) 0 128 *:22 *:* users:(("sshd",848,3)) - ssh -v localhost # works! - sudo ufw status verbose # yields: "Status: inactive" I haven't change anything in the config file. What can I do to locate the Problem and solve it? Glad about every hint! Edit: ping was succesful in both directions! I did a telnet <machineK> 22 from machin G which resulted in Trying and then in telnet: Unable to connect to remote host: Connection timed out. But telnet the other way around worked just fine! Edit 2: ssh start/running, process 966 # yields: ssh start/running, process 966 /etc/hostname # contains my hostname, let's call it blubb /etc/hosts # contains the following 127.0.0.1 localhost # 127.0.1.1 blubb 129.26.68.74 blubb # I added this! - sudo service ufw status # yields: ufw start/running I installed Gufw and set it to ON. Then I selected from Incoming the option ALLOW. Then I sshed to another machine from where I sshed back to my machine. Still the same error as above: connect to host blubb port 22: Connection timed out Any more hints, what I can check?

  Read the article

• Sharing folder in a Virtual Private Windows Server 2008 R2 ?

  - by Triztian

  See Edit 2: Hello all, seems my involvement with computers has grown and I've found my self in the need to access a shared folder on a server. I've read some documentation and managed to set up the folder as a share, for this I created a local group and for now just one local user that has access to the share, the folder is in the public user folder and it's permissions should be (and I believe they are) read/write. The problem is that I can't connect from a remote machine I mean I don't know how the way it should be accessed, the server has a public IP and we use it also as a host to our website I don't know if that affects it though, the folder will be used as the "keeper" for the QuickBooks company files and has the database server manager installed. I've tried setting up a VPN Connection to the but no success. The server has a domain name a "http://www.example.com" that redirects to our website, I am unsure if it could be accessed that way, also the share has a location displayed when I right-click properties Heres what I've tried Setting up a VPN Connection (Windows Vista and 7) Got to the point where I got asked for credential and entered the user I created (which is not an admin) but I got a "Connection fail error 800" I suppose this is because in the domain field I entered the servers workgroup. right-click add network connection (Windows 7) Went through the wizard until I reached the point of entering the location, tried many things, the name in the share's properties(\\SOMETHING\Share), the http://www.example.com , the IP address I'm quite unfamiliar with this, so I have my guesses: Since the group and user are local they do not have access to the folder. The firewall in the server is blocking my connection. Anyways, any help and guidence is truly appreciated. EDIT 1: As @tony roth pointed out it may be a security fail, an I commented it out to management and said that that is not an issue, so please bare with me. EDIT 2: I've found out that the real question could be streamlined to "Sharing folder in a Virtual Private Server?", as thats what we have, a virtual private windows server 2008 R2, and I would like to know how to make it show like a normal folder in the client computer. Thanks again for all of your support.

  Read the article

• Not able to access other machines on network

  - by TheVillageIdiot

  Hi I'm running Windows 7 Enterprise (32bit) on my laptop. For some time I'm not able to access other machines using \\192.168.xxx.xxx. I've installed VM Ware player on my machine few days back but I don't remember if it happened just after that or there is some other reason behind it. EDIT:- I've disabled VMWare Bridge Protocol but still no effect. Please help me. PS:- I've used both wireless and wired networks. Network sharing is enabled and I can ping other machines but cannot access network shares. I get following message: \\xxx.xxx.xxx.xxx You might not have permission to use this network resource. Contact the administrator of this server to find out if you have acess permissions. The request is not supported. EDIT (2):- Network Discovery, File and Printer Sharing, Folder sharing are all on.

  Read the article

• Kalculate = math + fun

  - by Devin A. Rychetnik

  Kalculate is a you vs. the Internet style game for math lovers. The rules are simple: answer as many math problems as you can in 90 seconds. At the end of each round, Kalculate will tally up all the scores and show you where you ranked relative to others currently playing.Tip: answering 3 questions in 10 seconds earns you a score multiplier      If you prefer to just practice and stay out of the competition, there's an offline mode that allows you to play solo.Kalculate is free (ad-supported) and can be downloaded here.

  Read the article

• 'dock' working in simple words

  - by Shirish11

  I would like to know the idea behind the working of 'docking' in applications. I have worked with applications where components from individual forms are docked on a single main form to provide the necessary GUI. But I don't have any idea whats happening in the background. According to Wikipedia A dock is a graphical user interface element that typically provides the user with a way of launching, switching between, and monitoring running programs or applications. Now I am a bit confused if it is some component or an event or a property or something else. EDIT : The applications was developed in Delphi on windows platform. There is something more in Delphi (manual dock and automatic dock).

  Read the article

• Input/Output console window in XNA

  - by Will Bagley

  I am currently making a simple game in XNA but am at a point where testing various aspect gets a bit tricky, especially when you have to wait till you have 1000 score to see if your animation is playing correctly etc. Of course i could just edit the starting variable in the code before I launched but I have recently been interested in trying to implement a console style window which can print out values and take input to alter public variables during run-time. I am aware that VS has the immediate window which achieves a similar thing but i would prefer mine is an actual part of the game with the intention that the user may have limited access to it in the future. Some of the key things i have yet to find an answer to after looking around for a while are: how i would support free text entry how i would access variables during runtime how i would edit these variable I have also read about using a property grid from windows form aps (and partially reflection) which looked like it could simplify a lot of things but i am not sure how I would get that running inside my XNA game window or how i would get it to not look out of place (as the visual aspect of is seems to be aimed just for development time viewing). All in all I'm quite open to any suggestions on how to approach this task as currently I'm not sure where to start. Thanks in advance.

  Read the article

• Should I Adjust the Volume by Software or Hardware?

  - by Jason Fitzpatrick

  You can adjust the your speaker volume in-app, operating system-wide, or by the physical controls on your speaker setup. Which method is best for optimum sound? Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-drive grouping of Q&A web sites. Our Geek Trivia App for Windows 8 is Now Available Everywhere How To Boot Your Android Phone or Tablet Into Safe Mode HTG Explains: Does Your Android Phone Need an Antivirus?

  Read the article

• Why are notifications appearing in the invisible black zone above my monitor ?

  - by Capt.Nemo

  I've got two monitors, with the right side one being slightly lower in the display settings. However any notifications I receive from notify-osd (including pidgin, notify-send etc) are sent to the top-most part of the right monitor screen, which results it in being invisible. And here's a pic of my monitor preferences : I'd earlier used the Wallpaper plugin in compiz to stitch my desktops, and then uninstalled compiz-extras. I'm using Ubuntu 11.04 in classic mode.

  Read the article

• Use PathModifier of MoveModifier for Tower of Defense Game

  - by Siddharth

  In my game I want to move enemy on the fixed path so that I have establish manual grid structure for that purpose not used tile map. Game contain multiple level and the path will be different for each level and also multiple fixed path exist for each level. So my question is, What I have to use MoveModifier or PathModifier for my game ? Also mention I have to use WayPoint or not. Further detail you all are free to ask. Please help me to decide what to do.

  Read the article

• Nvidia GT218 repository drivers don't work

  - by user1042840

  I upgraded all packages with sudo apt-get upgrade command on my Ubuntu 10.04 box and I have Ubuntu 12.04 3.2.0-29-generic-pae now. I have two monitors and the following GPU: 01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [NVS 300] (rev a2) After upgrading to 12.04, I somehow lost my previous setup with one common workspace stretched across two monitors. When Ubuntu starts only one monitor is on. I can see the message on the active monitor: Not optimum mode. Recommended mode: 1680x1050 60Hz I used Nvidia proprietary drivers on 10.04 but now jockey-text --list shows: xorg:nvidia_current - NVIDIA accelerated graphics driver (Proprietary, Disabled, Not in use) xorg:nvidia_current_updates - NVIDIA accelerated graphics driver (post-release updates) (Proprietary, Enabled, Not in use) When I run sudo nvidia-settings it says You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server.' I typed nvidia-xconfig and rebooted, but jockey-text --list says the same after the reboot: Not in use. The same with nvidia-current - Enabled but Not in use. I also tried nvidia-173 but I ended up in tty immediately at startup so I removed it. I used to have some problems with Nvidia proprietary drivers on 10.04, I had to put paths to EDID files in /etc/X11/xorg.conf explicitly, but the resolution was as recommended and both monitors were working. If I understand correctly, nouveau drivers are used now by default because the resolution is still quite high, definitely not 800x600, xrandr showed: xrandr: Failed to get size of gamma for output default Screen 0: minimum 320 x 400, current 1600 x 1200, maximum 1600 x 1200 default connected 1600x1200+0+0 0mm x 0mm 1600x1200 66.0* 1280x1024 76.0 1024x768 76.0 800x600 73.0 640x480 73.0 640x400 0.0 320x400 0.0 1680x1050_60.00 (0x4f) 146.2MHz h: width 1680 start 1784 end 1960 total 2240 skew 0 clock 65.3KHz v: height 1050 start 1053 end 1059 total 1089 clock 60.0Hz However, colors seem a bit faded and blurry with nouveau drivers. Mouse cursor is invisible if it's placed inside Firefox window, and only one monitor is working. I like open source and if it's possible I'd prefer to use nouveau drivers but a few things should be fixed. I'm curious why nvidia-current drivers from the repository don't work now. I read it has something to do with the new X11 server in Ubuntu 12.04, is it true? How can I get it back to work?

  Read the article

• typeset: not found error when executing shell script. Am I missing a package or something?

  - by user11045

  Hi, below is the error and corresponding script lines: spec@Lucifer:~/Documents/seagull.svn.LINUX$ ./build.ksh ./build.ksh: 36: typeset: not found ./build.ksh: 39: typeset: not found ./build.ksh: 44: function: not found Command line syntax of - options -exec : mode used for compilation (default RELEASE) -target : target used for compilation (default all) -help : display the command line syntax ./build.ksh: 52: function: not found ERROR: spec@Lucifer:~/Documents/seagull.svn.LINUX$ Script Init of variables BUILD_TARGET=${BUILD_DEFAULT_TARGET} BUILD_EXEC=${BUILD_DEFAULT_EXEC} typeset -u BUILD_OS=uname -s | tr '-' '_' | tr '.' '_' | tr '/' '_' BUILD_CODE_DIRECTORY=code BUILD_DIRECTORY=pwd typeset -u BUILD_ARCH=uname -m | tr '-' '_' | tr '.' '_' | tr '/' '_' BUILD_VERSION_FILE=build.conf BUILD_DIST_MODE=0 BUILD_FORCE_MODE=0

  Read the article

• Using PHP Redirect Script together with Custom Fields (WordPress)? [on hold]

  - by Alex Scherer

  I am currently trying to make yoast's link cloaking script ( Yoast.com script manual // Github Script files ) work together with the Wordpress plugin Advanced Custom Fields. The script fetches 2 values (redirect id, redirect url) via GET and then redirects to this particular URL which is defined in a .txt file called redirects.txt I would like to change the script, so that I can define both the id and redirection URL via custom fields on each post in my WP dashboard.. I would be really happy if someone could help me to code something that does the same as the script above but without using a redirects.txt file to save the values but furthermore gets those values from custom fields. Best regards ! Alex

  Read the article

• How to customize live Ubuntu CD with my own branding?

  - by Ahash

  I would like to create a customized UbuntuOS (Live CD/DVD) for my office and house by installing some additional packages. I have followed this link but it doesn't seems to work. Can anyone provide clear instructions? Customize Packages that I want to install: KDE Desktop Enviornment Thunderbird VLC Player WIne Programme Loader Skype Playmouth Manager Super Boot Manager Synaptic Package Manager Changes that I need: Different default Ubuntu wallpaper Installing KDE Environment Changing Boot (Splash) Screen with my customize theme I want to installing ubuntu With 2 Language, Bangla & English Please Note, I do not prefer Remastersys, manual way will be appreciated.

  Read the article

• dhcp configuration not working ubuntu 11.10

  - by Vivek Pradhan

  I am usually behind a proxy server in college so I connect to the ethernet or wifi using manual IPv4 addresses only inside college. I have been trying really hard to get the internet work at home, there is no proxy and I have set the network to use automatic dhcp. It seems like it is not able to connect to the port, It gets disconnected after some time automatically and then tries to reconnect. The same thing is happening with wifi networks also, after some time i see a pop up asking for authentication and ultimately its not able to connect. What might be the problem here. I looked up some similar questions and checked the /etc/network/interfaces file and looks like this: auto lo iface lo inet loopback I have no idea what those lines mean but there is no configuration for eth0 or wlan0. Any help is deeply appreciated. Ubuntu loses it charms due to these small glitches.

  Read the article

• Week in Geek: Free Version of Google Apps for Business has been Discontinued

  - by Asian Angel

  This week’s edition of WIG is filled with news link coverage on topics such as Android’s ‘Google Now’ services are headed for Chrome, Microsoft is ready to push Hotmail users to Outlook.com, a 25 GPU setup devours password hashes at up to 348 billion per second, and more. How to Factory Reset Your Android Phone or Tablet When It Won’t Boot Our Geek Trivia App for Windows 8 is Now Available Everywhere How To Boot Your Android Phone or Tablet Into Safe Mode

  Read the article

• iwconfig, iw not displaying wireless information

  - by Srivatsa Kanchi

  after fresh install to 12.10, the wireless information is not shown by both iwconfig and iw. The wireless sets up successfully and able to connect This is what i get $ iwconfig wlan0 wlan0 IEEE 802.11abgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=14 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off $ iw wlan0 link Not connected. $ uname -a Linux srivatsa-ThinkPad-T61 3.5.0-18-generic #29-Ubuntu SMP Fri Oct 19 10:26:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux

  Read the article

• Is there a way to obtain a Dell server's RAID configuration/level using only winrm/wsman? (ESXi servers)

  - by EGr

  I've seen videos describing how to configure RAID using wsman/winrm commands run against a server's iDRAC, but I can't seem to find anything that will just give me the current configuration and RAID levels. Is this possible? What uri would I use? If it matters, this is being run against M610s. Edit: If there is an easier way to obtain this information by running a script against the iDRAC, I'm not opposed to switching my methods. EDIT: The server is running ESXi, so if there is a way to obtain this through the vSphere client or PowerCLI, I can do that too. Overall, I just need a way to obtain the RAID configuration for multiple servers without having to query against the actual server (eg: via the iDRAC).

  Read the article

• Week in Geek: Microsoft Warns of First Critical Security Flaws in Windows 8 & RT

  - by Asian Angel

  This week’s edition of WIG is filled with news link coverage on topics such as Mozilla Firefox turns 8 and Android turns 5, Windows (File) Explorer is the app that crashes most on Windows 8, Classic Mode (Session) will be dropped from GNOME 3.8, and more. 6 Ways Windows 8 Is More Secure Than Windows 7 HTG Explains: Why It’s Good That Your Computer’s RAM Is Full 10 Awesome Improvements For Desktop Users in Windows 8

  Read the article

• free Raw-File Converter/Editor

  - by RCIX

  I have RAW files output by a program with a specific set of properties (Photoshop RAW, 16 bits, IBM PC byte order, no header, 1 non-interleaved channel, variable sizes like 257X257 or 129X513); does anyone know of a free tool that will allow me to convert to and from this format, and possibly do basic editing (selection, copy/paste, rotation of selection)? I've tried Picasa, XNView, and Paint Shop Pro 7 and none of them work properly. The closest i get is Paint Shop Pro which will at least make a serviceable attempt to open these files but i can't set all of the proper settings. XNView just might be able to edit it if i can figure out how to change the open settings for a particular raw file. So my questions at current are: how do i tell XNView to open a raw file a particular way? Failing that, is there any free tool that can open Photoshop-RAW files with the above settings (that's not photoshop)? If it helps, i'm trying to import/export/edit hieghtmap data for maps for Supreme Commander.

  Read the article

• What can I use to set up a 100% cloud based python IDE + Hosting environment?

  - by PhD

  I'm working a side project and I can't always be on "my" machine to code/deploy the web application. I am aware of various cloud IDEs (e.g., Cloud 9 IDE) and independent Django/Flask etc., hosting services (e.g., Heroku). What is the best way to completely shift my development/deployment environment to the cloud so that I can code/deploy from anywhere? I don't mind using paid services but I'm not sure which cloud IDEs play nice with which hosting services. Has anyone tried this setup before? What has or hasn't worked? I want to minimize the manual intervention in 'connecting the two services' as much as possible. I'm going to be using Django, MySQL and Redis for the web-app

  Read the article

• Simpler Times

  - by Simon Moon

  Does anyone else out there long for the simpler days where you needed to move a jumper in the jumper block to set your modem card to use IRQ7 so it would not conflict with the interrupts used by other boards in your PC and your modem card came with a 78 page manual telling you everything you would need to know to write your own driver for the board including a full schematic along with the board layout showing every chip, capacitor, and resistor?  Ahhhhh, the simplicity!I am wrestling with UserPnp issues for a USB software licensing dongle that is needed by some third party software in one of our production applications. Of course, every machine in production is virtual, so it could be anything in the chain of the software application library to the device driver running on the VM to the configuration of the simulated USB port to the implementation of the USB connection and transport in the virtual host to the physical electrical connections in the USB port on the hypervisor.If only there were the virtual analog to a set of needle-nose pliers to move a virtual jumper.Come to think of it, I always used to drop those damn things such that they would land in an irretrievable position under the motherboard anyway.

  Read the article

< Previous Page | 233 234 235 236 237 238 239 240 241 242 243 244  | Next Page >