Search Results

Search found 24387 results on 976 pages for 'ssh client'.

Page 257/976 | < Previous Page | 253 254 255 256 257 258 259 260 261 262 263 264  | Next Page >

• Printing on Windows 8 64-Bit through Windows Server 2008 (32 Bit) RemoteApp

  - by Chris

  We have a network where our server is running on Windows Server 2008 (32 Bit) and a client computer is running on Windows 8.1 (64 bit) with a local printer attached to the client. The printer is an HP P1006. The remote app works well but when trying to print we get an odd "error 545". We have tried both using the "connect client printer" function in remoteapp and also making the printer shared over the network and printing to it via the network from within the remoteapp. Nothing works. We can print a test page from the server to the client computer just fine, but it seems from remoteapp we cannot. We have also tried installing the 32 bit drivers on the 64 bit machine as both the primary and secondary drivers but cannot get them to install. Suggestions please? We've been going crazy over this issue.

  Read the article

• Branding/Restricting a Software by License/Serial

  - by Sid

  I have made a POS System for a client of mine using MS Access Server-Client approach. He asked me to brand his software to allow only a certain "number" of users (cashiers) to access the POS System, and must be determined to the license his client will buy. EX: 10 User License = 10 Cashiers ( not necessarily 10 users, it can be 30 users, shifting) = it means 10 PCs will be installed with the client software I made. How and where do I put the logic that will determine if it is licensed or not. What I have done: I have created a serial key generator using Name. Problem is it can be duplicated once you give than name+serial combination, it would still work. I am counting the number of users logged at a time. This could be problematic as I am using MSAccess and not MSSQL. I have scrapped this idea, He also asked me if I could just put serial+mac address combination. That I could do but he will have a hard time implementing it and selling it if he needs the mac address of every computers to be installed with my POS. I am at lost on what can I do. Would like to ask for tips and suggestions. Thank you.

  Read the article

• Adding multiple websites with different SSL certificates in IIS 7

  - by Timka

  I'm having troubles using SSL for 2 different websites on my IIS 7 server. Please see my setup below: website1: my.corporate.portal.com SSL certificate for website1: *.corporate.portal.com https/443 binded to my.corporate.portal.com website2: client.portal.com SSL certificate issued for: client.portal.com When I try to bind https in IIS7 with the client's certificate, I don't have an option to put host name(grayed out) and as soon as I select 'client.portal.com' cert, I'm getting the following error in IIS: At least one other site is using the same HTTPS binding and the binding is configured with a different certificate. Are you sure that you want to reuse this HTTPS binding and reassign the other site or sites to use the new certificate? If I click 'yes' my.corporate.portal.com website stops using the proper SSL cert. Could you suggest something?

  Read the article

• RESTful applications logic and cross resource operations

  - by Gaz_Edge

  I have an RESTful api that allows my users to receive enquiries about their business e.g. 'I would like to book service x on date y. Is this available?'. The api saves this information as a resource to the following URI users/{userId}/enquiries/{enquiryId} The information shown when this resource is retrieved are the standard sort of things you'd expect from an enquiry - email, first_name, last_name, address, message The api also allows customers to be created for a user. The customer has a login and password and also a profile. The following URIs expose these two resources PUT users/{userId}/customers/{customerId} PUT users/{userId}/customers/{customerId}/profile The problem I am having is that I would like to have the ability to allow users to create a customer from an enquiry. For example, the user is able to offer their service on the date requested and will then want to setup a customer with login details etc to allow them to manage the rest of the process. The obvious answer would be to use a URI like users/{userId}/enquiries/{enquiryId}/convert-to-client The problem with this is is that it somewhat goes against a lot of what I've been reading about how to implement REST (specifically from the book Restful Web Services which suggests that URIs should point to resources not operations on resources). The other option would be to get the client application (i.e. the code that calls the api) to handle some of this application logic. This doesn't quite feel right to me. I have implemented in my design that the client app is fairly dumb. It knows just enough to display the results from the API, and does not contain any application logic. Would be great to hear what others views are on the best way of setting this up Am I wrong to have no application logic in the client app? How would I perform this operation purely in the REST api?

  Read the article

• how to configure svn between two remote system on different network?

  - by Ghost Answer

  The story is that I have two systems on two different network IPs (like client on 10.0.15.24 and server on 117.152.18.140). I am communicating between them by team viewer port 80. I have installed svn subversion on server and svn client on client system. I also installed apache server on server system. Now my question is that I want to configure them. first is it possible, if yes, then please give the proper suggestion. Is there any changes to be make in firewall on server or client or both. thanks

  Read the article

• MS Access 2010 hide/show text with abutton

  - by grant

  Hi I have a problem where the user has a form in MSAccess. The form contains information about the client. The client fields are – client’s first name, client’s last name, their street address, suburb and city, their landline number and their cell phone number and their email address. However the user does not always want to see the email address and would like to have a button that will show or hide the email address. I have to write a set of instructions that will solve this problem. Can anyone help??

  Read the article

• Windows' "open with" with java and a jar file

  - by Boldewyn

  I use the rest-client to test REST APIs. It is basically just a .jar file, that is called via java -jar rest-client.jar. The rest-client uses two file extensions, in my case .rcq, to store data in files. I want to let the explorer open .rcq files with java -jar rest-client.jar <infile>, however, if I configure it (via GUI) to use the JAR alone, it obviously doesn't work. I'd be fine with touching HKEY_CLASSES_ROOT for this, as well, but don't know the exact syntax. By the way: It's WinXP.

  Read the article

• SEO and internal links

  - by hanazair

  I'm fairly new to SEO and although I've read many articles on the topic I still don't have a clear idea of how to get my client's website get to the first page of Google Search. I run MOZ competitor analysis and see that a competitor that comes up at the top of Google Search has approximately same Domain Authority, Domain Moz Rank and Trust. They have 8 External Linking Root Domains while my client's site has five. Yet the competitor comes up as one of the top sites on the first page, and my client's side is on page #3. Then I noticed one drastic difference in competitor's ranking and that is Total Links. He has 1,388! I don't understand how this could be a positive factor in Search Engine ranking and how can they legitimately have 1,388 links (while only 14 of those are external). Another competitor who is #2 in search engine rankings has 773 links total with only 14 external links. It seems fishy, but yet there they are - at the top of the search engine results. Is that some current way to trick Search Engines? What to do if I'd like to get my client's website onto the first page by some legitimate means? Thanks.

  Read the article

• How is network mounted software executed?

  - by CptSupermrkt

  I would like to understand how network mounted software works. For example, at my place of work, we have a software server. Each client machine (hundreds of them) automatically mounts directories from the software server on boot. For example, a program like Matlab is installed just once on the software server, but each client machine can start up an instance of Matlab. What is going on under the hood? Let's say I run /opt/bin/matlab and /opt/ is mounted from the software server, what happens when I press Enter to execute matlab on a client machine? The process is on the client machine, and I've already narrowed down that there isn't any implicit or hidden file transfer (i.e. copying matlab to my machine temporarily for that session) by running matlab on a computer with nearly zero disk space (i.e. not enough room to transfer). Since Matlab was installed on the server, how is my client computer executing it? What mechanism is controlling this? What is happening behind the scenes?

  Read the article

• Perfectly reproducable select statement default ordering issue....

  - by Dave

  Hi, I've recently been chasing an issue with a client's db... solution found, but impossible to recreate. Essentially, we're doing a Select * from mytable where ArbitraryColumn = 75 Where MyTable has an Identity column, called 'MyIndentityColumn' - incremented by one in each insert. Naturally, and normally I would assume that the order returned would be the order in which they are inserted (bad assumption, but one which was forced onto me, through an inherited application - which has been patched). Essentially, I would like suggestions as to why the database, when restored to my local machine (same OS, same SQL server version - 200 sp3) same collation, and same backup instance restored on it, as a test DB on the client site. When I perform the above select, I get them in order of insert (i.e. identity column ordered ascending). On the client, it seems random (but the same 'random' order each time)... A few other points: I have the same collation on my test server as client Same DB backup restored to a test only I can access Same SQL server version and service pack Same OS Test DB is a new DB - new log and MDF... I have the problem 'solved' by adding an explicit order by clause but I want to undertand the cause of the issue, given the exact nature of my attempts to recreate it beuing futile, and perfectly recreatable on the client server... Thanks in advance, Dave

  Read the article

• How to Avoid a Busy Loop Inside a Function That Returns the Object That's Being Waited For

  - by Carl Smith

  I have a function which has the same interface as Python's input builtin, but it works in a client-server environment. When it's called, the function, which runs in the server, sends a message to the client, asking it to get some input from the user. The user enters some stuff, or dismisses the prompt, and the result is passed back to the server, which passes it to the function. The function then returns the result. The function must work like Python's input [that's the spec], so it must block until it has the result. This is all working, but it uses a busy loop, which, in practice, could easily be spinning for many minutes. Currently, the function tells the client to get the input, passing an id. The client returns the result with the id. The server puts the result in a dictionary, with the id as the key. The function basically waits for that key to exist. def input(): '''simplified example''' key = unique_key() tell_client_to_get_input(key) while key not in dictionary: pass return dictionary.pop(pin) Using a callback would be the normal way to go, but the input function must block until the result is available, so I can't see how that could work. The spec can't change, as Python will be using the new input function for stuff like help and pdb, which provide their own little REPLs. I have a lot of flexibility in terms of how everything works overall, but just can't budge on the function acting exactly like Python's. Is there any way to return the result as soon as it's available, without the busy loop?

  Read the article

• got VPN l2l connect between a site & HQ but not traffice using ASA5505 on both ends

  - by vinlata

  Hi, Could anyone see what did I do wrong here? this is one configuration of site1 to HQ on ASA5505, I can get connected but seems like no traffic going (allowed) between them, could it be a NAT issue? any helps would much be appreciated Thanks interface Vlan1 nameif inside security-level 100 ip address 172.30.205.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address pppoe setroute ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 shutdown ! interface Ethernet0/3 shutdown ! interface Ethernet0/4 shutdown ! interface Ethernet0/5 shutdown ! interface Ethernet0/6 shutdown ! interface Ethernet0/7 shutdown ! passwd .dIuXDIYzD6RSHz7 encrypted ftp mode passive dns server-group DefaultDNS domain-name errg.net object-group network HQ network-object 172.22.0.0 255.255.0.0 network-object 172.22.0.0 255.255.128.0 network-object 172.22.0.0 255.255.255.128 network-object 172.22.1.0 255.255.255.128 network-object 172.22.1.0 255.255.255.0 access-list inside_access_in extended permit ip any any access-list outside_access_in extended permit icmp any any echo-reply access-list outside_20_cryptomap extended permit ip 172.30.205.0 255.255.255.0 o bject-group HQ access-list inside_nat0_outbound extended permit ip 172.30.205.0 255.255.255.0 o bject-group HQ access-list policy-nat extended permit ip 172.30.205.0 255.255.255.0 172.22.0.0 255.255.0.0 pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 nat-control global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) 172.30.205.0 access-list policy-nat access-group inside_access_in in interface inside access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout uauth 0:05:00 absolute username errgadmin password Os98gTdF8BZ0X2Px encrypted privilege 15 http server enable http 64.42.2.224 255.255.255.240 outside http 172.22.0.0 255.255.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto map outside_map 190 match address outside_20_cryptomap crypto map outside_map 190 set pfs crypto map outside_map 190 set peer 66.7.249.109 crypto map outside_map 190 set transform-set ESP-3DES-SHA crypto map outside_map 190 set phase1-mode aggressive crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 30 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 65535 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp nat-traversal 190 crypto isakmp ipsec-over-tcp port 10000 tunnel-group 66.7.249.109 type ipsec-l2l tunnel-group 66.7.249.109 ipsec-attributes pre-shared-key * telnet timeout 5 ssh 172.30.205.0 255.255.255.0 inside ssh 172.22.0.0 255.255.0.0 outside ssh 64.42.2.224 255.255.255.240 outside ssh 172.25.0.0 255.255.128.0 outside ssh timeout 5 console timeout 0 management-access inside vpdn group PPPoEx request dialout pppoe vpdn group PPPoEx localname [email protected] vpdn group PPPoEx ppp authentication pap vpdn username [email protected] password ********* dhcpd address 172.30.205.100-172.30.205.131 inside dhcpd dns 172.22.0.133 68.94.156.1 interface inside dhcpd wins 172.22.0.133 interface inside dhcpd domain errg.net interface inside dhcpd enable inside ! ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect netbios inspect rsh inspect rtsp inspect skinny inspect esmtp inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp ! end

  Read the article

• Apache mod_remoteip and access logs

  - by GioMac

  Since Apache 2.4 I've started using mod_remoteip instead of mod_extract_forwarded for rewriting client address from x-forwarded-for provided by frontend servers (varnish, squid, apache etc). So far everything works fine with the modules, i.e. php, cgi, wsgi etc... - client addresses are shown as they should be, but I couldn't write client address in access logs (%a, %h, %{c}a). No luck - I'm always getting 127.0.0.1 (localhost forward ex.). How to log client's ip address when using mod_remoteip?

  Read the article

• backuppc - how to backup remote (over the internet) clients?

  - by Scott

  I am testing out backuppc, which works great so far backing up windows clients on a LAN via SMB (no backup client/agent required). However I have quite a few laptops and desktops that are in various remote locations - some of which move around. I need some way to have that remote computer create an outgoing connection for backup purposes (Windows XP/7). I know backuppc supports smb, rsync and 'tar', but I believe these are all connections going from the server TO the client. SO, I either need a way to vpn the client on a timed basis, or it would be a lot better if the client could some how connect to the server (ssh?) and initiate it's own backup somehow (rsync?). Of course this all needs to be pre-installed by me and require no maintenance by the end user, no dialogs on their side. What do you think?

  Read the article

• Email bounce back 550 5.1.1 recipient rejected

  - by Stan

  A client recently switched to Exchange Server / Outlook for their email. Since then emails from my company to any email address at their company bounce back from the System Administrator with this error: Your message did not reach some or all of the intended recipients. Subject: Email Solution Sent: 12/12/2012 11:08 AM The following recipient(s) cannot be reached: '[email protected]' on 12/12/2012 11:08 AM 550 5.1.1 <[email protected]> recipient rejected Looking in the Message Options of the bounce back email shows no data in the Internet Header field. My client's IT guy says we're not being blocked, but I cant think of any other reason the bounce would occur. Any suggestions on what questions to ask or how to fix this would be helpful. I'm using a desktop version of Outlook 2007 and connecting through my ISP. Thanks.

  Read the article

• Trying to Set up SMTP Server on WIndows Server 2012

  - by datc

  I'm working on a website, and I need to test the functionality of sending email messages from ASP.NET, something like this: Dim msg As New MailMessage("email1", "email2") msg.Subject = "Subject"<br> msg.IsBodyHtml = True<br> msg.Body = "Click <a href='site'>here</a>." Dim client As SmtpClient = New SmtpClient() client.Host = "My-Server"<br> client.Port = 25<br> client.DeliveryMethod = SmtpDeliveryMethod.Network<br> client.Send(msg) This is running from a Windows 8 workstation. I've installed SMTP server on my Windows Server 2012 machine. The mail shows up in the mailroot/Queue folder and sits there, eventually getting deposited into Badmail. Now I have AT&T U-verse at home, and a few devices connected to the gateway, including let's call it "My-Server." When I run SmtpDiag from say, datc@... to [email protected] I get SOA serial number match passed, Local DNS (99-135-60-233.lightspeed.bcvloh.sbcglobal.net) & Remote DNS (hotmail.com) tests *not* passed, and ultimately, Connecting to the server failed. Error: 10060. Failed to submit mail to mx2.hotmail.com error. When I set My-Server's IP to static and equal to the external IP, 99.135.60.233, and again run SmtpDiag, I get SOA, Local DNS, and Remote DNS tests passed, but the same 10060 error. Same for yahoo.com, gmail.com, and so forth. Is it my ISP's job to fix this? Some PTR record missing somewhere? Is it at all possible to have a home-based SMTP server? All I want is to test my email code. Perhaps, my IP address is just not "trusted" somehow. Thanks.

  Read the article

• Inaccurate bandwidth limiting in altq queues

  - by overkordbaever

  I'm setting up an environment where I have one Linux server, one OpenBSD router and one Linux client and I want to be able to limit how much bandwidth the client should be able to use. I've been performing these tests with "netcat" and "time" (using time to measure the time of the transfer with netcat), and what happens when trying these tests (using the TCP protocol, the queues will for some reason not work with UDP) is that the queues aren't exact at all. For example: when setting a bandwidth limit of 10mbit, the client cannot use more than five mbits, when setting a limit of 100mbit, the client cannot use more than around 50mbit. The config looks like (using a 100mbit limit in the example): #queue rules altq on { $int_if, $ext_if } cbq bandwidth 100Mb queue { def, low } queue def bandwidth 0Mb cbq(default) queue low bandwidth 100Mb cbq(default) #Passrules test pass out quick from $int_if to $ext_if queue low pass in quick from $ext_if to $int_if queue low pass out quick from $ext_if to $int_if queue low pass in quick from $int_if to $ext_if queue low

  Read the article

• When can an FTP server close its passive connections?

  - by Don Kirkby

  Does the FTP protocol allow the server to close any of its passive connections while the client is still connected? Can it tell when the client is finished receiving and then close the connection? I'm including an FTP server in my application using the pyftpdlib Python project. I've got it to work in active and passive mode, but I'm a bit concerned about when it closes its passive connections. I've tried connecting to it with both FileZilla and the default ftp command in Ubuntu, and in both cases, I get a new passive port for every request. That is, if I sit in the root folder and type ls 10 times, I use up 10 ports. This means that I have to allocate a big block of passive ports for the FTP server to use so it won't run out. As soon as the client disconnects, the server releases all the passive connections associated with that client and those ports can be reused. However, a long-running connection could use up a lot of ports.

  Read the article

• Outlook and exchange 2010 stalls email

  - by lbanz

  User found an old pst file which is around 15GB and imported to his exchange mailbox. It imported fine. Outlook client starts syncing the emails to exchange. It stalls and then the user will need to reopen the client for it to sync again. The client doesn't crash and still continues to receive new emails but it just doesn't sync the old emails. Sits on Updating folders but doesn't do anything. Shows no sync or conflicts in the client. No errors on progress and Outlook network connection seems fine.

  Read the article

• Let varnish send old data from cache while it's fetching a new one?

  - by mark

  I'm caching dynamically generated pages (PHP-FPM, NGINX) and have varnish in front of them, this works very well. However, once the cache timeout is reached, I see this: new client requests page varnish recognizes the cache timeout client waits varnish fetches new page from backend varnish delivers new page to the client (and has page cached, too, for the next request which gets it instantly) What I would like to do is: client requests page varnish recognizes the timeout varnish delivers old page to the client varnish fetches new page from backend and puts it into the cache In my case it's not site where outdated information is such a big problem, especially not when we're talking about cache timeout from a few minutes. However, I don't want punish user to wait in line and rather deliver something immediate. Is that possible in some way? To illustrate, here's a sample output of running siege 5 minutes against my server which was configured to cache for one minute: HTTP/1.1,200, 1.97, 12710,/,1,2013-06-24 00:21:06 ... HTTP/1.1,200, 1.88, 12710,/,1,2013-06-24 00:21:20 ... HTTP/1.1,200, 1.93, 12710,/,1,2013-06-24 00:22:08 ... HTTP/1.1,200, 1.89, 12710,/,1,2013-06-24 00:22:22 ... HTTP/1.1,200, 1.94, 12710,/,1,2013-06-24 00:23:10 ... HTTP/1.1,200, 1.91, 12709,/,1,2013-06-24 00:23:23 ... HTTP/1.1,200, 1.93, 12710,/,1,2013-06-24 00:24:12 ... I left out the hundreds of requests running in 0.02 or so. But it still concerns me that there are going to be users having to wait almost 2 seconds for their raw HTML. Can't we do any better here? (I came across Varnish send while cache , it sounded similar but not exactly what I'm trying to do.)

  Read the article

• Thunderbird 15.0.1 cannot use Exchange 2003 SMTP

  - by speedreeder

  I'm having the strangest time getting a Thunderbird email client to connect to my Exchange 2003 server. I got the incoming IMAP account set up no problem, and I can receive mail. However sending mail will not work no matter what SMTP settings I enter. After checking the server, the proper settings should be port 25 with no authentication or connection security, which I have entered. I can ping the hostname of the server from the client machine in question. The Thunderbird error message I get is: "Sending of message failed. The message could not be sent because the connection to SMTP server -hostname omitted- was lost in the middle of the transaction." So I went to the server and double checked the settings for Exchange's SMTP stuff. I have it correct. I tried to telnet (on the server) to localhost 25. It appears to connect and then disconnect immediately, no message, no nothing. When I telnet to other ports (POP-110 for example) I get proper connection messages and a stable connection. There are no firewalls on either the client or the server. There's a firewall on the network but LAN-LAN traffic is unrestricted. I can reproduce the Thunderbird error on a second client, and I can't get any client to be able to telnet in. Anyone have any ideas?

  Read the article

• bluetooth connection using pybluez

  - by srj0408

  I am working on bluetooth not exactly on bluetooth stack-development but to use bluetooth in one of my project. I had done all that before using some of the py-bluez commands like hciconfig, hcitool scan , then simple-agents and using serial module inside python. But that was quite random. We were able to connect only one specific device based on its bluetooth address and there was no facility of reconnection once the devices are disconnected. Now i want to try out this stuff in a sequential manner like this (i am doing that all on a RPI and for at present on ubuntu 12.04.) i) Store some names in a file along with some other information with respect to that device. ii) Run a script to find out the device in locality with those names and if any one if found, report that. For this step, i had taken a reference from BTBook , made available from MIT. Below is the script for the same, but that script only search for the single name. from bluetooth import * target_name = "XT1033" target_address = None nearby_devices = discover_devices() for address in nearby_devices: if target_name == lookup_name( address ): target_address = address break if target_address is not None: print "found target bluetooth device with address ", target_address connect_socket(target_address); else: print "could not find target bluetooth device nearby" iii) Connect the device using client sock. But i dont have any device on which i can write a simple python script. My client can be any device that will be publishing data. Now i came through a script in the same book, that actually connect to a client requesting permission to connect to server. from bluetooth import * port = 1 server_sock=BluetoothSocket( RFCOMM ) server_sock.bind(("",port)) server_sock.listen(1) client_sock, client_info = server_sock.accept() print "Accepted connection from ", client_info data = client_sock.recv(1024) print "received [%s]" % data client_sock.close() server_sock.close() here client_sock, client_info = server_sock.accept() provide the client address and port requested to be connected. Can i pass address obtained from the earlier script to this, so that it connect server to the client? iv) Then if client get disconnected, re-connect(a simple polling can be used.) All this stuff can be done using bash and py-bluez functions but i want to do that in a sequential manner.I am not a master in python but i can do some small stuff. Can any one guide me for the same or can direct me to more usefull resource through which i can continue my coding part after finding the "X", "Y" named devices.

  Read the article

• Do you think we will ever settle on a "standard" platform? [closed]

  - by GazTheDestroyer

  The recent explosion of phone platforms has depressed me (slightly), and made me wonder if we will ever reach any kind of standard for presentation? I don't mean language or IDE. Different languages have different strengths and I can see that there may always be a need for disparity, although I do note that languages are merging somewhat in functionality, with traditional imperitive languages like C++ now supporting things like lambdas. What I'm really talking about is a common presentation mechanism. Before smart phones and tablets came along, the web seemed to be finally becoming a reasonable platform for presenting an application that was globally accessible, not just geographically, but by platform too. Sure there are still (sometimes infuriating) implementation differences and quirks, but if you wrote a decent site you knew it could be accessed on anything from a PC to a phone to a C64 running the right software. "Write Once Run Anywhere" seemed to finally be becoming a reality. However, in the last few years we've seen an explosion of mobile operating systems, and the ubiquitous "app". A good site is no longer enough, you need a native "app", and of course we have a sudden massive disparity in OS, language, and APIs needed to write them as each battles for supremecy. It's kind of weird how the cycle of popularity goes. Mainframes with terminals - thin client. PC - thick client. Web browser - thin client. Phone app - thick(ish) client. I just wonder if you think there will ever be a global standard for clients, or whether the "shiny and different" cycle will always continue along with the battle of the tech du jour.

  Read the article

• Gathering application architecture

  - by userbb

  Suppose there is system for gathering info about system activities. There is a client part with an interface and there are agent parts that are installed on each machine. I estimate that there could be max 20 computers now. Later could be more like 50. My solutions: Agent stores data into local database e.g. sqlite. There is also a service which can be used by a client to query data. So if a client wants to display data for 50 computers, he sends a query to 50 computers. I'am on that solution now but maybe it's totally wrong. Agent stores data into local database (I don't known good one for that). There is also server (main database) and local databases are synchronized with the server. In this case, a client connects to the main database to display data. Agent sends data in realtime to main database. So same as point 2, but there is no sync. Like in point 3, but agent buffers data in local database and sends it in small chunks to main database. What is the best approach?

  Read the article

• Remotely Managing Storage on Hyper-V 2012 Core

  - by Vazgen

  I have a core Hyper-V Server 2012 that I am remotely managing from a Windows 8 client. I can connect in Hyper-V Manager, Server Manager, and MMC. However, I don't understand how I can manage the physical hard drive (for ex, deleting vhdx files, creating folders, etc) from my Windows 8 client. I tried to attach the remote share as follows: q: \\MyServer\c$ It said command completed successfully, but I don't see the drive on my client's Explorer. I can get to it in cmd.exe on the client but how can I manage it in a GUI? explorer q: Throws error:

  Read the article

< Previous Page | 253 254 255 256 257 258 259 260 261 262 263 264  | Next Page >