Search Results

Search found 28222 results on 1129 pages for 'machine config'.

Page 279/1129 | < Previous Page | 275 276 277 278 279 280 281 282 283 284 285 286  | Next Page >

• IDE compatability with SATA image

  - by Ormis

  We had an old CNC machine's hard-drive fail recently. The hard-drive is an old 1275MB IDE (Seagate) and there were defiantly bad sectors on it. I was able to image the contents of the drive onto a drive in my computer before it became completely unusable (I used DD, replacing all bad sectors w/ 0s). After running a couple chdsks, the SATA drive will boot off of the image. This is great, but there's one problem. The CNC machine old and requires IDE, I've attempted to copy the currently booting image off of the SATA drive and onto IDE drives numerous times in numerous ways and every time I do so the machines return that a boot device cannot be found. Some other information: The file system is fat32, running windows 98 The SATA drive is an 80gb drive I have tried copying the image to three 20gb and two 80gb IDE drives I have checked the jumper on the back of the IDE drives when using them If anyone has any ideas, questions, suggestions, etc. please let me know. P.S. I would just put a fresh install of win98 on the machine if i had the installation media (so that's out of the question). And if it comes to it, this is my last week working here, so I'll leave that to my co-worker. EDIT: Also, I have tried using Clonezilla as well as straight up DD to copy the image to the IDE drives.

  Read the article

• SSH automatic logon works for one user but not the other

  - by tinmaru

  I want to enable automatic ssh login using the .ssh/config file for my git user. Here is my .ssh/config file: Host test HostName myserver.net User test IdentityFile ~/.ssh/id_rsa Host git HostName myserver.net User git IdentityFile ~/.ssh/id_rsa It works for my test user but not for my git user so my global SSH configuration is correct. The configuration are exactly the same as far as I know. It used to work with git user but I'm unable what change has broken the automatic logon. When I type: ssh -v git I get the following log: ... debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey Offering RSA public key: /Users/mylocalusername/.ssh/id_rsa debug1: Authentications that can continue: publickey,password debug1: Next authentication method: password [email protected]'s password: _ Does anyone know what could be a possible difference

  Read the article

• Intel Motherboard Lightning Victim Dies Hard

  - by Stetson RDT

  Today, I have a more hardware-related question. I have an Intel board, and I really do not know which board it is, I built the machine for a relative, but he forgot to keep the documentation. Long story short, the computer was disconnected during a lightning storm, but a lightning strike travelled in via the ethernet cable (It was directly connected to a power brick commonly seen on those long distance ISP Wireless transmitters), and the motherboard was shocked. I am attempting to get this PC going. The problem is as follows: The computer will randomly reboot, just in the middle of anything as it pleases. May load to EFI (or whatever BIOS is nowadays), may load to bootloader, may even get to the OS. But before 5 minutes is up, the system will always die. Out of curiosity, I plugged my voltmeter in to a molex connector. On the 5V side, it gets a good, consistant +5.13V. On the 12V side, it fluctuates, as follows: Upon immediate startup, it soars to 12.11-12.13V. It will now do one of two things: it will immediately jump down to 12.04-12.05V, or hover for about a minute at 12.11-12.13, then jump down. It seems the longer the voltage stays at 12.11-12.13, the shorter the machine will stay running. Also, post codes, whenever the machine locks up, but does not die hard, seem to be between "AA" and "AC". Does this make any sense to anybody? Do you all think this motherboard is salvageable? It was an expensive bugger, and I'd prefer to not replace it.

  Read the article

• NGINX rewrite rules help. Redirect not working and want to get rid of index.php in urls

  - by Tamerax

  hey! I have 2 questions for nginx users. 1) I'm trying to setup my joomla server onto my new linode running NGINX and after much (like days) of searching and testing, I finally have a config that works with with SEF url plugins...sorta. I was using an apache system on the old server and it used mod_rewrite and life was fine in terms of SEF. Since NGINX doesn't have mod_rewrite, I found something that works BUT it constantly leaves index.php in the urls. ex: http://mysite.com/index.php/forum i want it to be just http://mysite.com/forum but without mod_rewrite it doesn't seem to be possible in joomla that i'm aware of. I know in wordpress it IS possible but I have to use a plugin. Here is my config file: server { listen 80; server_name mysite.com www.mysite.com; access_log /home/public_html/mysite.com/log/access.log; error_log /home/public_html/mysite.com/log/error.log; root /home/public_html/mysite.com/public/; large_client_header_buffers 4 8k; # prevent some 400 errors index index.php index.html; fastcgi_index index.php; location / { expires 30d; error_page 404 = @joomla; log_not_found off; } # Rewrite location @joomla { rewrite ^(.*)$ /index.php?q=last; } # Static Files location ~* ^.+.(jpg|jpeg|gif|css|png|js|ico)$ { access_log off; expires 30d; } # PHP location ~ \.php { keepalive_timeout 0; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; include /usr/local/nginx/conf/fastcgi_params; fastcgi_param SCRIPT_FILENAME /home/public_html/mysite.com/public /$fastcgi_script_name; } } 2) second question should be easy but i can't get it to work. I want to use the same config I posted above and have either mysite.com or www.mysite.com both forward to mysite.com/portal. Basically when you hit up the front page with or without the www, it all gets forwarded to a sub directory on the server I called Portal. I have tried several variations of: rewrite ^/(.*) http://www.example.com/portal/$1 permanent; but it usually ends with firefox telling me there is some crazy loop happening the address bar saying something like mysite.com/portalportalportalportalportal.........on and on. So, any help on either of these issues would be awesome!! Thanks!!

  Read the article

• I keep getting OpenSSL Header Version not found error when compiling OpenSSH Debian Squeeze

  - by Romoku

  I built Openssl1.0.0d ./config shared no-threads zlib It installed fine to the default /usr/local/ssl I went and downloaded OpenSSH 5.8p2 and ran ./configure but now it keeps giving me a Openssl version header not found error even when I set --with-ssl-dir= I've tried it with arguments /usr/local/ssl/include /usr/local/ssl/include/openssl /usr/include /usr/local/ssl/lib I looked in config.log and found error: openssl/opensslv.h: no such file or directory which makes little sense since I pointed openssh to where it is store. /etc/ld.so.conf include /usr/local/ssl/lib I'm at a loss at this point. Answer (maybe): Because I am an idiot. include /usr/local/ssl/lib is incorrect. /usr/local/ssl/lib is correct. It needs to be before the first include.

  Read the article

• Recent DDE / file open issue with Office 2007 affecting only a few machines, is a Windows Update to blame?

  - by kafka

  All our workstations run Windows 7 Professional 64 bit. It started with one, then another, then another couple of machines having a problem accessing Word files locally and on the network. This doesn't happen on my machine though. Affected users get the error message 'There was a problem sending the command to the program'. I've Googled for solutions, but none of the answers worked. They suggested deleting certain registry keys; unregistering and reregistering the program for DDE; resetting the way that the shell opens .docx programs etc. each to no avail. As it affects local and network shares I believe the problem lies with the clients, and not the server, and I'm starting to suspect that there could have been a recent Windows Update which has caused this. I've tried comparing the updates on my working machine with an affected machine, but I can't immediately see any major differences. Has anyone else recently encountered this problem? What are the best steps to take to further isolate what could be causing this?

  Read the article

• Xen DomU does not have network connectivity

  - by Prakashkumar Thiagarajan

  I am trying to install Xen on my Fedora box. Dom0 image has network connectivity. But when I try to create a DomU, it does not have network connectivity. I want to be able to run in bridged mode. I have the /etc/xend/xend-config.sxp file accordingly. My config file looks like kernel = "/boot/vmlinuz-2.6.18-xenU" memory = 64 name = "clientA" vif = ['bridge=xenbr0,mac=12.34.56.78.9A.BC'] root = "/dev/sda1 ro" ramdisk = "/boot/initrd-linux.img" extra = "ro selinux=0.3 initcall_debug" features = 'auto_translated_physmap' Am I missing something ?

  Read the article

• Getting list of opened ssh connections by name

  - by lyrae

  I have a config file in my .ssh dir that looks like this Host somehostA HostName 123.45.67.89 User katsh So from my local machine, i can ssh into multiple machines by their name in the config file, like so ssh somehostA ssh somehostB ssh somehostC ... etc Is it possible to get a list of all machines i am connected to, by their name? I know I can do: lsof -i tcp -n | grep '\<ssh\>' and i'll get something like ssh 9871 katsh 3u IPv4 400199 0t0 TCP 987.654.2.2:47329->987.654.2.2:47329:ssh (ESTABLISHED) ssh 20554 katsh 3u IPv4 443965 0t0 TCP 123.456.7.8:41923->123.456.7.8:ssh (ESTABLISHED) But it does not list their names, just IP

  Read the article

• Xen find VBD id for physical disks

  - by Joe

  I'm starting a xen domU using xm create config.cfg. Within the config file are a number of physical block devices (LVs) which are added to the guest and can be accessed fine when it boots. However, at a point in the future I need to be able to hot unplug one of these disks using the xm block-detach command. This command, however, requires the vbd id of the device to be detached and I can't find a way to find the device id for a particular disk 'plugged in' at start up. Any help is much appreciated!

  Read the article

• nginx deny directory and files to be downloaded

  - by YeppThat'sMe

  gurus. I have a problem and i dont know how to solve it. I am working with Git and Compass/SASS on some projects. Now i want to protect those directories. When i go only to the folder its all fine – i get what i expected a 403 forbidden. location ~ /\.git { deny all; } But when i try use the full path to the config file from git the browser start to download it. Same scenario with compass. There is a config.rb file within the folder which also starts to download it. How can i prevent this behaviour? How can i deny downloading specific files?

  Read the article

• IP Masquerade and forwarding

  - by poelinca

  Hi all , i got a dedicated server running ubuntu server 10.10 with 3 ip adresses on the same eth card ( example: eth0 192.168.0.1 , eth0:0 188.78.45.0 , eth0:1 ... ) with a 3 virtual machines running ( virtualization technologi used is lxc but i don't think this matters too much ) . Now i need to redirect all ports opened ( using ufw to close/open ports ) from the ip 188.78.54.0 ( eth0:0 ) to a virtual machine ip ( let's say for example 192.168.2.3 ) , all requests made by a virtual machine should be redirected back to the virtual machine that made the request ( in this example 192.168.2.3 ) . Lets say the second vm has the ip 192.168.2.4 now i need to redirect all opened ports to from eth0:1 to this ip and viceversa . And so on and so on , what are the iptables/ufw rules to get this done ? and where to save them ( witch config file ) so they stay the same after reboot . In a few words redirect all requests comming from/to eth0:0 to a certan ip , all requests comming from/to eth0:1 to another ip ... Remember i'm saying all ports opened becouse they might be dynamicly changed . p.s. please excuse my bad english

  Read the article

• Fresh install CentOS 6.4 64b with directadmin slowly consumes all memory and crashes

  - by Coen Ponsen

  Dear server fault community, This is my first question on server fault, i'm new to server (mis)configuration so please forgive me for asking something stupid :) I'm running Directadmin on a CentOS 6.4 64b with 4GB memory and over 10000Gh virtual machine. I migrated my websites because my former vps couldn't keep up anymore. Only half of the websites from this 1GB machine were migrated jet. So the migration is still in progress and already my server crashes every day. The server performance up until that moment is perfect. The directadmin log files show nothing out of the ordinary. Yesterday only the mysql server crashed but it also crashed the entire machine before. The memory usage in DA seems to be normal: directadmin directadmin (pid 3923 22158 22159 22160 22161 22162 )8.75 MB dovecot dovecot (pid 3851 ) 47.8 MB exim exim (pid 1350 ) 1.29 MB httpd (pid 21525 21528 21529 21530 21531 21532 21546 21571 21742 21743 21744 )490.4 MB mysqld mysqld (pid 1299 ) 287.8 MB named named (pid 3807 ) 16.3 MB proftpd proftpd (pid 1481 ) 1.91 MB sshd sshd (pid 1173 21494 ) 5.16 MB Restarting services immediately frees up memory, but slowly over time the memory usage increases(about 24 hours to crash). The commands: # sync # echo 3 > /proc/sys/vm/drop_caches Will free al memory correct. I could just create a cronjob but it seems the wrong way around to me. I can't seem to pinpoint the cause. Any advices, references or tips are highly appreciated! Greetings, Coen edit: free -m : after drop_caches: total used free shared buffers cached Mem: 3830 735 3095 0 0 21 -/+ buffers/cache: 712 3117 Swap: 991 0 991 I'll post another one this evening.

  Read the article

• How does one debug Windows network share authentication?

  - by ajs410

  I have machine0 with 32-bit Vista, logged in as a domain user, running a VMWare image of 32-bit Vista, logged in as a local user, with the VM set to bridge the network. From an administrator account (called admin) within the VM, I try to access the hidden C$ share on machine0 (i.e. start - run - "\\machine0\C$\"). I get no prompts for credentials. Worse, machine0 has an admin account (different password), and machine0\admin gets locked out when VM\admin tries to access the network share. I get a message several seconds later, which feels like a cached credential failure leading to the lockout. I have checked several places for cached credentials; net use, Stored Usernames and Passwords, mapped shares. I rebooted (both machine0 and VM) to make sure the session was clear of any cached credentials. I can force net use to use my domain credentials when accessing machine0, and then I can see the share. I can also see shares that do not require credentials. I decided to try another machine on the network (machine1), 64-bit Vista, local user. This machine has no lockout policy, and after several seconds (feels like failed cached credentials again) it prompts me for credentials. After I enter them, it re-prompts me, saying "logon unsuccessful" (tried my domain credentials, and also machine1\admin's). Which is bogus, because I proceed to log on with remote desktop using the machine1\admin credentials. I have tried this on another machine (machine2, 64-bit Vista), running a copy of the same 32-bit VM, and I don't remember having this problem. machine0 has a fingerprint reader...could that try storing passwords and interfere? Are there any places I'm missing where there could be cached credentials? Is there a way to see what credentials are flying around when I try to connect?

  Read the article

• Directory "Bookmarking" in Linux

  - by Jason R. Mick

  Aside from aliasing and links, is there an easy way in Linux to tag commonly used directories and to navigate to a commonly used directory from the terminal. To be clear the disadvantages I see with alternative approaches, and why I want a bookmark/favorites like system: alias Cons: Too specific (every new favorite requires a new alias...although you could in theory make an alias that echo append your dir as a new alias, which would be sort of clever). Can't nest favorites in folders (can't think of a simple solution to this outside of heavy config scripting). links Cons: Clutter directory make ls a headache. pushd/popd Cons: Non-permanent (without shell config file scripting), can't nest favorites in directories, etc. Granted I have multiple ideas for making my own non-standard solution, but before I have at it I wanted to get some perspective on what's out there and if there is nothing, what is a recommended approach. Does anyone know of such a favorites/bookmark-like terminal solution?

  Read the article

• can't register a soft phone to asterisk11

  - by Tom

  I have a VM (on oracle vbox) running Fedora17. I've installed asterisk 11 on it from sources. I've followed the wiki for installation (https://wiki.asterisk.org/wiki/display/AST/Creating+SIP+Accounts) to the letter. The ip on the VM machine running fedora is 192.168.1.7 and I can ping it from the host machine (Ubuntu 12.04), which is at 192.168.1.2 I've tried registering with ekiga with the following settings: user: [email protected]. Password: verysecretpassword registar: 192.168.1.7 but I'm getting an error "transport fail". Also, while trying to register I'm logged in to the asterisk CLI with verbose level 3 and debug level 4 and nothing appears. some more relevant data: I've added the following code to the end of my sip.conf.sample file: [demo-alice] type=friend host=dynamic secret=verysecretpassword context=users deny=0.0.0.0/0 permit=192.168.1.0/255.255.255.0 [demo-bob] type=friend host=dynamic secret=othersecretpassword context=users deny=0.0.0.0/0 permit=192.168.1.0/255.255.255.0 After I changed the sip.conf.sample file, I've created a copy of it and named it sip.conf. then I logged in to the asterisk CLI and typed sip reload. Then I'm trying to register and ekiga client from my host machine at 192.168.1.2 but it doesn't work and nothing appears on the asterisk CLI while in verbose mode level 3. BTW, If there is missing information about my question, please don't close it. comment about what you need to know and I'll edit it in to the question. tnx.

  Read the article

• XP - ping changes routing table?

  - by Corelgott

  Hey Folks, I have got a real strange behaviour with one of my XP-Sp3 machines. Setup: A Server in the lan (192.168.5.0) proviedes access to all roadwarriors in 10.8.0.0 The DCHP has a static route for all clients pronouncing 192.168.5.235 as gateway for 10.8.0.0 All Clients can ping & access the vpn-machines; everything works like a charm But one Xp-Sp3 is not willing to connect to them. It gets all the same routes as any other sytem in the lan and I trippel-checked - there are no static routes on this machine When I ping any 10.8.0.0 device from this machine, the first two packaged work like a charm; but the next two (and any package after them) fail and get lost. When I look back into the routing table: There is a new route; a special one just for the device I pinged, which points to the right gateway - but which wasn't there earlier... As Long as this route exists the machine can't ping anything on 10.8.0.0. But if I remove the route by hand: The next to ping packages work fine... Has anybody got an idea about that? Anybody every seen such a behaviour? Any hint / help / tip is greatly appreachiated! thx in advance Corelgott Ps: I attach an image of the cmd to clarify things - its in german, but reading a routing table shouldn't be that hard...

  Read the article

• Vagrant VM Fails to Boot

  - by Rob Wilkerson

  I have a Vagrant environment that requires me to forward port 80 so I bring it up under sudo on an OS X machine. This has always been fine until I recently upgraded to Vagrant 1.2.2. Now it fails to boot. [default] Waiting for VM to boot. This can take a few minutes. [default] Failed to connect to VM! Failed to connect to VM via SSH. Please verify the VM successfully booted by looking at the VirtualBox GUI. Because I'm running under sudo, the machine never gets added to the Virtualbox GUI, but that's always been the case for this environment. I don't get any indication that there was a problem with the additions -- a potential source of this error, from what I've read. I can bring things up just fine if I change to using port 8080 on the host machine. I can't use the app, but the VM itself loads up and provisions nicely. As far as I can tell, the only thing that's changed is: I upgraded my Vagrant version I updated the project's Vagrantfile to use v2 syntax. Anyone have any idea what I might be missing? I thought I'd be able to find this pretty easily, but it's quickly becoming a very real problem.

  Read the article

• Nginx PHP-FPM Basic Auth

  - by Lari13

  I have nginx with php-fpm installed on Debian Squeeze. Directory tree is: /var/www/mysite index.php secret_folder_1 admin.php static.html secret_folder_2 admin.php static.html pictures img01.jpg I need to close secret_folder_1 and secret_folder_2 with basic_auth. Now config looks like: location ~ /secret_folder_1/.+\.php$ { root /var/www/mysite/; fastcgi_pass 127.0.0.1:9000; fastcgi_param SCRIPT_FILENAME /var/www/mysite$fastcgi_script_name; include fastcgi_params; auth_basic "Restricted Access"; auth_basic_user_file /path/to/.passwd; } location ~ /secret_folder_1/.* { root /var/www/mysite/; auth_basic "Restricted Access"; auth_basic_user_file /path/to/.passwd; } Same config for secret_folder_2. Is it normal? I mean, first location for serving php files in restricted folder, and second location for serving static files. Can it be simplified?

  Read the article

• Configure X connections over TCP without using an X connection

  - by Darren Cook

  I want to run a GUI application on a remote machine I only have ssh access to. I don't need to, or want to, see the GUI window. (I know I could use something like ssh -C -X remote_server if I wanted the GUI to be on my client.) I know X is running on the remote machine, as ps shows this: root ... /usr/bin/Xorg :0 -br -audit 0 -auth /var/gdm/:0.Xauth -nolisten tcp vt7 I set DISPLAY=:0.0 but I then get "Xlib: connection to ":0.0" refused by server" when I try to use it. At Get remote x display working in linux without ssh tunneling and Xserver doesn't work unless DISPLAY=0.0 I see the advice to use gdmsetup to allow X to listen on TCP. But, gdmsetup is a GUI application! And trying to run it over ssh -X did not work ("X11 connection rejected because of wrong authentication"). So, is there a text file I can edit to remove -nolisten? And, after editing it, how do I safely restart X, remotely? (There is other stuff running on this machine, so requesting a reboot is possible, but undesirable.) If not, should gdmsetup be able to run over ssh and I should persevere in that direction? UPDATE: I had to do the ssh -X session as root (ssh as a normal user, then sudo or su, does not work.) So, I did the edit with gdmsetup. I then restarted X with gdm-restart. I've also done xhost + from that ssh -X session. The ps line no longer shows the -nolisten tcp part. But still no luck connecting to it, with either DISPLAY=:0 or DISPLAY=localhost:0

  Read the article

• ASPX code too run query

  - by Akoori

  I have web.config like below : </appSettings> <authentication mode="Windows" /> <authorization> <allow users="*" /> <!-- Allow all users --> </authorization> <trace enabled="false" requestLimit="10" pageOutput="false" traceMode="SortByTime" localOnly="true" /> <sessionState mode="InProc" stateConnectionString="tcpip=127.0.0.1:42424" sqlConnectionString="data source=127.0.0.1;Trusted_Connection=yes" ****ieless="false" timeout="30" /> <globalization requestEncoding="utf-8" responseEncoding="utf-8" / I need an aspx code to run query with this connection string that there in this web.config Regards

  Read the article

• How to resolve 'No internet connectivity issues' with a Virtualised 2008 R2 Server using Forefront UAG

  - by user684589

  I have spent some considerable time reading up on as many possible blogs and articles as I can to help me solve why my VM (Running on Hyper-V) for DirectAccess has suddenly stopped being able to access the internet. The VM setup shares the same internet connection on which I have written and submitted this question so I know that the actual underlying internet connection is fully functional. Previous to last week the DirectAccess was fully functional and had no issues. This is a recent problem which was led up to by a number of consistent crashes on the DA machine when access was attempted. Upon reboot all seemed well until recently. I am not certain whether it is relevant, but previously to this I had a number of power issues where the entire VM host shutdown unexpectedly leaving around 8 VM's in a bad way. Upon restart, the UAG DirectAccess machine was unable to access its configuration service (although the service was started) but this seemed to relate to the Light-Weight Active Directory Service AD LDS which had a corrupted database. Having repaired this database, I restarted the service and could subsequently reconnect to the configuration service again. For good measure I re-bound the network adapters (virtualised through Hyper-V) and DirectAccess claimed to be all happy again. However as it stands my machine is still unable to access the internet showing the "No internet connectivity" exclamation mark for the external facing NIC. I have also tried removing the adapters, disabling, re-enabling and the problem persists. The intranet part of the VM CorpNet seems to be fully functional as before and I'm running out of ideas. Any input would be greatly appreciated. I am not an advanced Domain Administrator so please be gentle.

  Read the article

• overload environment

  - by Richo

  I've recently switched across to nesting my home directory across all my machines in an svn repo, meaning that my utility scripts, configuration (irssi, vim, zsh, screen etc) as well as my .profile and so forth are easier to keep up to date across all the places I login. I use a set of sourced .local files to override them on a per site basis as required. As it stands, many of my scripts inherit some form of configuration, and for the most part I've been setting an environment variable in .profile, and then if needed on a per site basis overriding it in .profile.local This works great, but are there pitfalls in having a stack of environment variables? If I take my default environment from within an X session before any of my personal configuration I have not even increased it by 50% but some of the machines I work on are low resource, am I bloating my system unneccessarily, or being needlessly paranoid? Should I start moving this config into seperate flatfiles that are loaded as needed? This means extra infrastructure, or alternately writing a single module for storing config that all of my utilities can inherit.

  Read the article

• Cannot ssh into server

  - by revolver

  I am trying to SSH into a linux machine running ubuntu, but the interactive shell stuck somewhere and I can't key in anything. I am on Mac OS X Lion. This only happens when I am trying to access via an external IP. Local LAN SSH is working perfectly. macbook:~ user$ ssh -v -v user@serverip // i skipped the rest of the log, but I can paste it here again if needed. Authenticated to serverip debug1: channel 0: new [client-session] debug2: channel 0: send open debug1: Requesting [email protected] debug1: Entering interactive session. debug2: callback start debug2: client_session2_setup: id 0 debug2: channel 0: request pty-req confirm 1 debug1: Sending environment. debug1: Sending env LC_CTYPE = UTF-8 debug2: channel 0: request env confirm 0 debug2: channel 0: request shell confirm 1 debug2: fd 3 setting TCP_NODELAY debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 My terminal shell just hang after this, and I can't key in anything. I checked var/log/auth on the server and saw that the a session is being created and I had already logged in, but I don't see any responses on my client machine. I googled around and a lot of the solution had to do with the Broadcom wireless driver, but I am not even using one, so I am pretty clueless here. To give you more information, the linux machine is also running a web server, and I have no problem accessing the web server. Thanks. Any help is appreciated.

  Read the article

• Transfer of ownership of Windows 7

  - by ziggy

  I am thinking of purchasing a copy of Windows 7 via either ebay or GumTree. I am unsure as to how the product key works. A close friend of mine is warning me against buying it from ebay as he is suggesting that once it has been used, the operating system registers itself on microsoft servers using the serial number of the motherboard of the system where it has been installed. This means once installed on one machine you wont be able to install it on another machine. Now i am struggling to believe that an operating system can only be installed on one machine. Can someone please explain exactly how this works. I can see a lot of copies being sold on Ebay which are used. I used the 'Ask a question' option and the majority of the users are saying that i should be able to use it. If someone buys Windows 7 from the shop, installs it on his PC but then decides that he wants to sell it can he not sell it? Will the person buying it not be able to use it? Does the person selling it have to somehow unregister it first? What do i need to look out for if buying it from Ebay? Thanks

  Read the article

• Restoring openldap configuration from ldif file?

  - by Solignis

  I am trying to restore my OpenLDAP server from an ldif file I made before it went horribly wrong. All of the websites I found talk about using slapadd but when I run slapadd -v -l ~ns01/openldap_config.ldif it returns the error Could not stat config file "/etc/ldap/slapd.conf" : No such file or directory (2) slapadd: bad configuration file! When I look in the directory indeed the file does not exist, but this is because Ubuntu 11.10 is running in RTC mode, my LDAP server uses the /etc/slapd.d/cn=config for the configuration. So? What am I missing? Is slapadd the wrong tool to use? As I said above I running on Ubuntu 11.10 server edition 64-bit.

  Read the article

< Previous Page | 275 276 277 278 279 280 281 282 283 284 285 286  | Next Page >