Search Results

Search found 10719 results on 429 pages for 'hardware failure'.

Page 283/429 | < Previous Page | 279 280 281 282 283 284 285 286 287 288 289 290  | Next Page >

• Why doesn't my sound card start? It reports code 10.

  - by Sarim Ali

  When I installed the XP for first time my sound card was working fine. But only after the first reboot it has stopped working. Under Device Manager, the section "sound video and game controller" the entry YAMAHA Native DS1 WDM Driver, has a exclamation mark on it. On left clicking and selecting properties it shows this message "This device cannot start. (Code 10)". On trying to update driver it says a better driver can not be found. Any idea how I can solve the issue? Update: As suggested by harrymc I uninstalled the device "YAMAHA Native DS1 WDM Driver" , and scanned for hardware changes. The windows detected and installed the soundcard and it started working properly.BUT, after restarting the same problem occurs. So, now everytime I reboot the computer I am stuck to, repeating the process of uninstalling the device to make it work.

  Read the article

• dell u2410 3dMark Benchmark distortion problems

  - by Scanningcrew

  Ive been doing burn in testing for a new system I have put together and I am running into some video distortion problems with running the 3DMark benchmark tools (Both 06 and Vantage). The graphics will be fine, then sometimes during a test switch the screen will light up with thin horizontal ranibow lines (Something that looks very "glitchy") If i turn the monitor off and back on it clears up. All the tests "pass" and my system gets good marks but it concerns me if I might have problems with games (The screen returns to normal if I dont resest monitor and just let tests pass). I want to return a problem component now before its too late if it is something with the new hardware. Also, I am monitoring temp with thermal laser gun and the card itself is not going above 65c. Any ideas? System: Asrock x58 Xtreme - Last BIOS (1.80) EVGA Geforce GTX 285 w/ latest nvidia drivers (Connect via DVI1) Dell U2410(Set to 59hz refresh 1900x1202 -although I believe benchmarks run 1200x1024) Windows 7 Ultimate 64 12Gb DDR3 1600 RAM

  Read the article

• RAID P410i and P812 performance issues

  - by Alexey

  I'm having much trouble with I/O performance of HP DL360 server with two RAID controllers - P410i and P812, Windows Server 2008, 36 GiB RAM and 16 x Intel Xeon x5550. The server runs a bunch of tasks producing heavy sequential I/O, and after about 20-30 minutes of intensive work it looks like the tasks are stuck, not using CPU and with enough free memory (so this cannot be a bottleneck). The same tasks were running quite well on the older server (Windows Server 2003, 4 x Intel Xeon, 12 GiB RAM). RAID cache is present, write-cache battery is installed. Cache is configured as 25% readahead/75% writeback. The swap file resides on the logical disk served by P410i and other logical disks are on P812. Can someone tell me what can be the matter of this? Is this a hardware problem or misconfiguration?

  Read the article

• How to avoid Memory "Hard Fault/sec"

  - by Flavio Oliveira

  i've a problem on my windows 2008 server x64, and i cannot understand how can i solve it. i'm looking to Resource Monitor and see about 100 to 200 hard faults/sec. and generally the machine is slow. As i've readed a bit it is caused by a "memory Page" that is no longer available on physical memory and causes a io operations (disk) and it is a problem. The current hardware is a intel core2duo E8400 (3.0GHz) with 6GB RAM on a Windows Server Web 64-bit. Actually the machine have about 2GB Ram used what having 4Gb available to use, Why is the machine requires that high level of Disk operations? what can i do to increase the performance? Im experiencing a memory issues? what should be my starting point?

  Read the article

• Linux Logitech QuickCam Pro 9000 - microphone issues

  - by drahnr

  I got a Logitech Quickcam Pro 9000, the cam itself is working as it honors the UVC spec. This fancy WebCam has a integrated mic which worked some time before but now, it does no more. (Note: I use pulseaudio as it is a USB Mic and I am not really keen on the hassle of ALSA setup) Things I check already are if it gets detected at all: $ lsusb |grep Logi Bus 002 Device 002: ID 046d:0809 Logitech, Inc. Webcam Pro 9000 is muted in alsa-mixer - not the case, volume at 100 pavucontrol shows it too, but no input level bar! On top of that, if I open the gnome3 (fallback mode) audio panel(from the desktop panel), and disabel/reenable it in the hardware tab, it works "for some time"... Any hints? Any ideas? I am really out options for now, and the fact it worked like 6 months ago (perfectly) makes it no better.

  Read the article

• Universal Windows XP With Ghost and Sysprep

  - by RobertPitt

  Hey I have an idea but im not sure whether it is possible and looking for advice on how to accomplish this. If i was to try and deploy Windows XP Sysprepped image from a Lenovo Thinkcentre 6073-CTO and tried to drop it onto a Dell Optiplex for instance I would get a BSOD due to the hardware change. What im looking to do is create a few images like so: Windows XP x86 SP3 (Sysprepped) Windows XP x64 SP3 (Sysprepped) ... So that we can use throughout the organization without having to create individual images per computer type. Is there anyway's to accomplish this such as some modification of files pre-ghost, removal a certain drivers pre-sysprep Any advice is appreciated.

  Read the article

• Windows 7 Via Hyperion 4-1 drivers

  - by Gratzy

  I have a clean install of Win 7 on some relatively old hardware. Everything works pretty well however my cpu is pegged at 100% most of the time. Task Manager shows srvchost as being a main culprit of course but also system interrupts. I have a Biostar socket 478 MB with Via chipset. I have tried to find Windows 7 drivers for this but when I download and try to install what VIA/BIOSTAR say should be good for all OS's it will not load. I get a message saying can't find components for this OS. Anybody have any idea where I might find suitable drivers for the Chipset? BTW I'm not using the integrated graphics on the board but have a radeon 4500 pci-e card.

  Read the article

• Can't connect to wireless-n in dual mode.

  - by Tyllyn

  I recently purchased a Acer Aspire Revo AR3610-U9022. This little nettop uses a Atheros AR5B91 Wireless Network Adapter. I also have a Netgear RangeMax NEXT Wireless Route (model WNDR3300). I have been using this router in dual mode (11G and 11N) on my normal desktop without a problem (Mode: Up to 270Mbps at 5GHz & 54Mbps at 2.4 GHz), but doing this, my Revo won't detect the 11N network as being around... my desktop still does, but the Revo, nope... just the 11G. However, when I switch my router over to just "Up to 270Mbps at 2.4GHz", it kills the 11G entirely, but the Revo recognizes the 11N network. I'm a programmer by trade, and this hardware-y stuff confuses me more than it should. Is there any way that I could set this stuff up so my Revo can connect to the 11N part of my router, but keep the 11G around? :) Thanks!

  Read the article

• IP KVM switch, or serial console box for remote admin?

  - by grahzny

  We have a small server farm (11 now, may add more in the future) of HP Proliant DL160 G6s. They all run either Linux (server only, no X11) or VMware ESX. We had intended to get models with iLO, in case BIOS-level remote admin became an issue, but that didn't happen. I had an IP KVM switch recommended to me (along with some sort of Remote Reboot hardware.) I've since realized that none of our machines need GUI administration, so perhaps a serial console switch would be a cheaper and more appropriate option. Something like this: http://www.kvm-switches-online.com/serimux-cs-32.html Do you folks have an opinions on which way is a better choice? Should we go for the ease of setup (plug and go, instead of turning on the feature in the BIOS and making sure the serial settings are correct) and the flexibility of an IP KVM switch even with the extra cost? Or is a serial console switch just fine?

  Read the article

• Ghost Image - windows asks for activation on when deployed to VM

  - by Chris Sobolewski

  I have several images created with Ghost Solution Suite (v11 I believe), the images have been in use for a few years now, but I am finally to the point where I have enough time to attempt to virtualize them for easier updates. I am running VMWare and attempting to image the virtual machines with my ghost image files. For my images I am running sysprep with minisetup and using reseal. The image deploys successfully, however when I start the VM for the first time, it demands windows activation. This doesn't happen when I image a physical computer, even a different model with different hardware. The idea of virtualizing my images becomes rather worthless if I am unable to deploy the images without having to activate every time (especially as Microsoft keeps declaring our volume licence key as invalid for activations). Does anyone know why it is asking for activation on a virtual machine, but not a physical PC? How can I prevent this?

  Read the article

• Easily recreate a server's "state" [closed]

  - by Brandon Wamboldt

  I want the ability to setup new servers for dev/testing/prod very easily. The reasons for being able to setup a new dev VM is obvious, but for prod my concern is adding a new production server/migrating to a new server. I assume a traditional backup solution won't work as hardware may be different so the binaries/config might be different. I want to get experience with puppet anyways, so I was thinking about creating a manifest that would setup my users, install Postgres, Nginx, PHP-FPM, etc, and configure them the way I specify. Then I could install puppet on a new server, copy down my manifest and apply it locally. This would make keeping my server configs in sync easier too. Is there a better approach I'm not aware of, and does my approach have any pitfalls?

  Read the article

• [Ubuntu] How can i log-in to Ubuntu using USB-serial console (rs232) ?

  - by marc

  Welcome, How can enable remote terminal login into Ubuntu 9.10 using usb-serial terminal ? I got created device ttyUSB0 and i want allow to log-in using hyper-terminal. I found some resources but they are related to real! hardware rs232 ports, i can't find any information about USB converter. Right now i have established connection between that usb-serial port and my laptop (i can send text writing to port cp sometext.txt /dev/ttyUSB0 and read using hyperterminal). Any idea ? Regards

  Read the article

• Mac Book Pro SSD

  - by LiamB

  I have a Mac Book Pro (I7 and 8 Gig Ram). I'm a developer - do a fair amount of .net via VMware but lots of Ruby and NodeJs on the Mac. I'm looking to extract some more performance and i think a SSD might be a good option. So I have 2 questions, Can I straight up replace the drive thats in there with a SSD or will this cause me problems? I have files on there as well as apps. What are my options in terms of available hardware.

  Read the article

• How do I set up a shared internet on a network using computer hooked up to a router

  - by Skadlig

  I got a wireless broadband modem (Huawei E1750) hooked up to my computer (call it A., running Windows-7) whose internet I wish to share to my other computer (call it B., also running Windows-7). A. is hooked up to my d-link DIR-600 router using a wired connection to port 1 on the router. B. is connected to the router using a wireless connection. Now I have tried setting up the sharing according to the help files for ICS but I have not been able to get it working. I suspect that there is something in my hardware configuration that is making it difficult. I would appreciate some tips and pointers as to what could be the reason to my problems.

  Read the article

• External hard drive doesn't appear in Computer

  - by Thomas Clayson

  I cannot work out why this is happening. I have an external hard drive (which is an old laptop hard drive with an IDE to USB adapter). Plugging it into my computer powers it up. It spins correctly and the lights on the adapter flash normally. Uninstalling from hardware manager and plugging it back in causes Windows to "install new software", and it says it has installed properly. In Disk Management it comes up in the bottom part as Disk 2 with the right size (~60 GB), but not in the top half. There are three empty drives in the top half. They don't have titles or drive letters. Right clicking them bring up slightly varying context menus, but all with the options disabled. Here is a picture of my Disk Management screen: How do I make this drive show up in My Computer? I need to format it and use it as an external hard drive.

  Read the article

• Windows 2003 shutdown instead of reboot

  - by The_cobra666

  Hi all, I've got a very strange problem. On the net I can only find problems with Server 2003 pc's, that reboot instead of shutting down, but in my case... (go figure) it does the opposite. When I choose to reboot, the system shutdown. Yes I am sure I used the reboot button. It happens via start == reboot and it happens when clicking on the reboot button when the update's have been installed. Nothing changed to the system's hardware. Only update's have been installed on the system. I did notice something odd in the logs when rebooting: Description: Timed out sending notification of target device change to window of "C:\WINDOWS\Explorer.EXE" KB: http://support.microsoft.com/kb/924390 They talk about a removable drive, but in my case, it's explorer.exe :s it appears 4 times. OS: Windows Server 2003 R2. Services: AD, DNS, DHCP, WSUS. Thanks in advance! Greetings from Belgium Shane

  Read the article

• video streaming infrastructure advice

  - by Alchemical

  We would like to set-up a live video-chat web site and are looking for basic recomendations for software and hardware set-up. Most streams will be broadcast live from a single person with a web cam, etc., and viewed by typically 1-10 people, although there could be up to 100+ viewers on the high side. Audio and video do not have to be super-high quality, but do need to be "good enough". The main point is to convey the basic info in the video (and audio). If occasionally the frame-rate drops low and then goes back to normal fairly soon, we could live with that. Budget is an issue, so we are in general looking for a lower cost solution that will give us most of what we need in temers of performance and quality. We are looking at Peer1 for co-lo. The rest of our web site will be .Net / Windows platform. We are open to looking at any platform for the best streaming solution, although our technical expertise is currently more on the Windows side.

  Read the article

• SNMP - Value of CPU processor load not reflecting reality

  - by Ovesh

  Trying to plot CPU load on my server, with the following hardware: ProLiant DL360p Gen8 (same behavior on ProLiant DL360 G7). The machine is running VMWare ESXi5.1 To create a CPU spike I run dd if=/dev/zero of=/dev/null, and I know the CPU is overloaded, because I can see a correlating spike in the graphs displayed on vCenter. However, running this snmpwalk: snmpwalk -v 1 -c ******** 192.168.MY_IP 1.3.6.1.2.1.25.3.3.1.2 Shows the following results: iso.3.6.1.2.1.25.3.3.1.2.1 = INTEGER: 3 iso.3.6.1.2.1.25.3.3.1.2.2 = INTEGER: 2 iso.3.6.1.2.1.25.3.3.1.2.3 = INTEGER: 2 iso.3.6.1.2.1.25.3.3.1.2.4 = INTEGER: 3 Am I not looking into the right MIB? Should I be multiplying these by a constant? By the way, using HP Agentless Monitoring I was able to get some cpu stats, but not what I'm looking for, at least nothing I could find wading through these MIBs.

  Read the article

• Wireless printer going offline upon entering power save mode

  - by Regmi

  I recently bought a printer, Samsung ML1865W, a wireless laser printer. It works very well, wirelessly until after a while, it goes to power save mode when the printer goes offline. I then cannot connect to the printer (pinging the ip and various ports associated with it do not give any response) until I power cycle the printer. I have checked my wireless settings and my router, I have installed the printer software in WinXP, Win2000 and in Mac and the printer behaves just the same. Any ideas if the printer hardware itself is broken or that its something on my network/application side that's the culprit. If you own the printer, have you had any trouble like that at any time?

  Read the article

• Should my servers boot from VHD?

  - by tony roth

  I've been testing native vhd boot on several servers. It seems to be pretty transparent in terms of deployment and with my seat of the pants testing I have not noticed any difference in performance. The main reason that I want to boot vhd is due to their transportablility between different hardware and to hyper-v servers. the following roles will be installed. dfsr dhcp iis application server dc <- haven't tested this yet but see no reason why it won't work. With the above low impact (in terms of performance) roles do you thing booting from VHD is appropriate. thx

  Read the article

• After installing Windows Phone 8 SDK, Connectify doesn't work

  - by Pratyush Nalam

  Today I installed Windows Phone 8 SDK from the official site. After installing and a couple of restarts (it restarted the PC to enable Hyper-V), I opened Connectify. I use Connectify Hotspot to connect my iPod to the internet as I have an ethernet connection and no wireless router. The problem is that now, Connectify doesn't show WiFi in Share Over. The attached screenshot shows this. Previously, before I installed the SDK, it would show Ethernet and Wi-Fi. I would select WiFi and share my internet. Now, this is completely screwed. EDIT: I found out that the Microsoft Virtual Wi-Fi Miniport Driver has got disabled and I am not able to enable it again. Please advise. Please advise on what to do Hardware: Windows 8 Pro with Media Center, Apple MacBook Pro 9,1 15 inch Mid-2012 (non retina)

  Read the article

• Rugged Netbook and software options for Running R statistical software?

  - by Thomas

  I am interested in purchasing a netbook to do field research in another country. My hardware specifications for the nebtook: -Be rugged enough to survive a bit of wear and tear -Fairly fast processing (the ability to upgrade from 1GB of RAM to 2GB) -A battery life of longer than 6 hours -At least a 10 inch screen -A decent camera for Skyping My software needs: -Be able run a Spreadsheet program to do basic data input (like Excel or Open Office) -Use the Open Source Statistical Program R to do basic data analysis (Regression, data analysis etc.) -Word Processing (Word or Open Office) Do you have any suggestions on which models or brands my fit my needs? Some of the models I was considering: Samsung NB-30 Toshiba NB 305 Asus Eee PC 1005HA Lenovo S10-2 Also any recommendations on the best software to load on the aforementioned Netbooks. I saw this resource from [livehacker][6] Any comments. Thanks for your help! -Thomas

  Read the article

• Elantech touchpad: Right + Left click doesn't work

  - by Robert Kilar

  This is very common problem and till yet unresolved. The Elantech driver disables right button + left button touchpad click. In the result you cannot aim and shoot in games also you cannot code that kind of interaction in your applications. Driver detects LMB+RMB click but it somehow filters it. I could not find correct entry in the registry to disable that obviously horrible setting. Please notice: 1. I have the latest drivers the problem existed with really old ones, a year old, on Windows 7, 8 and 8.1 ones and current. 2. It has nothing to do with the Windows or hardware but only with the Elantech driver settings. 3. Driver detects LMB+RMB click - it is shown on a dynamic icon on a task bar also uninstalling drivers fix the problem, but then you can't use your touchpad fully.

  Read the article

• How can I access shared XP files over wifi with an Archos 5 Internet Tablet with Android?

  - by Fred

  I have an Archos 5 Internet tablet with Android. I have been using it to stream video over my XP wifi network. Yesterday the Archos stopped seeing any of my computers. I have found some programs that allow me to see the network, so I know the hardware works. However, this program does not allow me to pick the correct program to play the files I want. I suspect the problem lies somewhere on the XP side. This would probably work better if the Archos 5 allowed me to manually input the IP address. Help?

  Read the article

• How can I access shared XP files over wifi with an Archos 5 Internet Tablet with Android?

  - by Fred

  I have an Archos 5 Internet tablet with Android. I have been using it to stream video over my XP wifi network. Yesterday the Archos stopped seeing any of my computers. I have found some programs that allow me to see the network, so I know the hardware works. However, this program does not allow me to pick the correct program to play the files I want. I suspect the problem lies somewhere on the XP side. This would probably work better if the Archos 5 allowed me to manually input the IP address. Help?

  Read the article

< Previous Page | 279 280 281 282 283 284 285 286 287 288 289 290  | Next Page >