Search Results

Search found 68249 results on 2730 pages for 'sudo work'.

Page 293/2730 | < Previous Page | 289 290 291 292 293 294 295 296 297 298 299 300  | Next Page >

  • Cannot access the filesystems using LiveCD (LVM2,EXT2)

    - by ftkg
    I have to restore the /etc/passwd file I accidentally renamed in my Ubuntu Server, so I booted the machine using a LiveCD. Problem is, the system filesystem does not appear in Nautilus, under 'Devices'. Am I missing anything? ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000956dc Device Boot Start End Blocks Id System /dev/sda1 * 2048 499711 248832 83 Linux /dev/sda2 501758 625141759 312320001 5 Extended /dev/sda5 501760 625141759 312320000 8e Linux LVM ubuntu@ubuntu:~$ mount /cow on / type overlayfs (rw) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) /dev/sr0 on /cdrom type iso9660 (ro,noatime) /dev/loop0 on /rofs type squashfs (ro,noatime) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) tmpfs on /tmp type tmpfs (rw,nosuid,nodev) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu) ubuntu@ubuntu:~$ sudo blkid /dev/loop0: TYPE="squashfs" /dev/sda1: UUID="aad69790-198d-45bc-9ccd-e4cba7456914" TYPE="ext2" /dev/sda5: UUID="wbIDX7-RILL-VtFT-gX15-N1GJ-Yyfg-V8Oe5m" TYPE="LVM2_member" /dev/sr0: LABEL="Ubuntu 12.04 LTS i386" TYPE="iso9660" ubuntu@ubuntu:~$ cat /etc/fstab overlayfs / overlayfs rw 0 0 tmpfs /tmp tmpfs nosuid,nodev 0 0

    Read the article

  • 'Xojo' is the only application that I can't install

    - by Gichan
    I can't install xojo. When I click install in the software center it's not progressing. In the terminal it's stuck in : gichan02@gichan02-Latitude-D520:~$ sudo apt-get install xojo [sudo] password for gichan02: Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: xojo-bin The following NEW packages will be installed: xojo xojo-bin 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 209 MB/209 MB of archives. After this operation, 596 MB of additional disk space will be used. Do you want to continue? [Y/n] Y 0% [Working] then after waiting for an hour for progress it says: Failed to fetch https://private-ppa.launchpad.net/commercial-ppa-uploaders/xojo/ubuntu/pool/main/x/xojo/xojo-bin_2013.41-0ubuntu1_i386.deb Could not resolve host: private-ppa.launchpad.net So I added apt repository for 'private-ppa': deb https://ging-giana:[email protected]/commercial-ppa-uploaders/xojo/ubuntu trusty main Then when I try 'apt-get update': GPG error: https://private-ppa.launchpad.net trusty Release: The following signatures were invalid: NODATA 2 Then I noticed something the Software Sources:Other software TAB: Added by software-center; credentials stored in /etc/apt/auth.conf https://private-ppa.launchpad.net/commercial-ppa-uploaders/xojo/ubuntu So i go to the '/etc/apt/auth.conf' ,but It cannot be opened and it is not a keyserver. So i uncheck: Added by software-center; credentials stored in /etc/apt/auth.conf https://private-ppa.launchpad.net/commercial-ppa-uploaders/xojo/ubuntu GPG error was gone. But then again I found myself at the beginning of the problem.STUCK at '0% [Working]'. 'Xojo' is the only application that I can't install.Any explanation why is it like that?

    Read the article

  • Suddely internet is not accessible

    - by user189708
    I am going crazy here. One day everything was working fine. I turned pc off and went to sleep. Next day turn pc on and cannot access internet (from any browser). The situation is: I cannot open any webpage from browser (tried Firefox and Epiphany) and cannot receive emails in thunderbird. BUT if I run firefox from console as sudo, I can use it as usual. I can access Skype and pretty much any other network stuff (like installing software with apt-get etc.), also if I use Astrill VPN software I can access webpages even running without sudo. I haven't install any software or anything like that for several days = I have not a clue what could cause this. Just by the way, other Win PC in our home has no issue. Here is what I have tried to fix this: I have tried to restart my pc, router, modem - multiple times I have tried to change permissions to my firefox profile I have tried to completely re-install firefox and start with blank profile, thus no addons I have tried to change /etc/resolv.conf to an IP of my router (it was 127.0.1.1) I have tried to change my hostname (from tomino-NB to tominoNB) I think I might try even more stuff. None of it works. Can someone please try to help me. Thank you UPDATE 1: I have tried this: Removing resolv.conf - Didn't help Also "ping" and "dig" commands cannot resolve host UPDATE 2: I have tried to edit nameservers in resolv.conf but still no effect. I can ping router as well as I can ping outside IP. So definitely just some DNS issue. Is it possible that something is rewriting path to resolv.conf and using different file? UPDATE 3: I have just restarted PC and everything works now... resolv.conf went back to nameserver 127.0.1.1 . I have no clue what happened that it works again...

    Read the article

  • Brocken package for libavcodec54 & libx264-123 in ubuntu 14.04LTS

    - by Kachavarapu Ajay
    $ sudo apt-get install -f [sudo] password for ajay: Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: libx264-123 The following NEW packages will be installed: libx264-123 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. 2 not fully installed or removed. Need to get 0 B/345 kB of archives. After this operation, 1,005 kB of additional disk space will be used. Do you want to continue? [Y/n] y (Reading database ... 166965 files and directories currently installed.) Preparing to unpack .../libx264-123_0.123.2189+git35cf912-1ubuntu4_amd64.deb ... Unpacking libx264-123:amd64 (2:0.123.2189+git35cf912-1ubuntu4) ... dpkg-deb (subprocess): decompressing archive member: lzma error: compressed data is corrupt dpkg-deb: error: subprocess <decompress> returned error exit status 2 dpkg: error processing archive /var/cache/apt/archives/libx264-123_0.123.2189+git35cf912-1ubuntu4_amd64.deb (--unpack): cannot copy extracted data for './usr/lib/x86_64-linux-gnu/libx264.so.123' to '/usr/lib/x86_64-linux-gnu/libx264.so.123.dpkg-new': unexpected end of file or stream Errors were encountered while processing: /var/cache/apt/archives/libx264-123_0.123.2189+git35cf912-1ubuntu4_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1)

    Read the article

  • System in low-graphics mode

    - by Artem Moskalev
    I am totally new to Linux, and Ubuntu. I bought ASUS X53E Notebook, erased Windows and installed Ubuntu. First it worked ok. Then when I started working with it, i opened the terminal, entered sudo chmod 666 usr and then all the icons from the main panel disappeared + the whole system stopped responding. I decided to restart the system. When restarted, a message appears: the system is running in low graphics mode and below it: Your screen, graphics card and input device setting could not be detected correctly. You will need to configure it yourself. But the "OK" button is disabled and if I press any buttons nothing happens. If I enter Ctrl-Alt-F2 it opens the bash terminal. But there commands sudo or apt-get are not found and it says that permission denied if i try to enter any folder like cd /usr If I enter the su command it asks for the password I don't know. When encountering this problem first, I reinstalled the whole Ubuntu. but today it happened again just the same. What shall I do? maybe there is something wrong with the hardware? If I need to install another distribution of Linux could you recommend one? but I'd rather stick to Debian releases like Ubuntu. so how do I fix the problem? PS: Please give answers in simple terms because am a newbie so i don't know what goes where yet.

    Read the article

  • Hide icons encrypted file system partitions in Nautilus

    - by Eddy Pronk
    I've installed Ubuntu 10.04 from the alternate CD. It has an encrypted root and swap partition. The root partition is visible in Nautilus as 'File Syste' icon. There is another icon "216 GB Filesystem". If I click it says: Unable to mount 216 GB Filesystem. /dev/mapper/sda5_crypt is mounted. Then there is another icon "6.1 GB Swap Space". If I click it it says: Unable to mount 6.1 GB Swap Space. Not a mountable file system. How can I hide these last two icons? Partition layout: $ sudo fdisk -l /dev/sda [sudo] password for eddyp: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xa6e92df4 Device Boot Start End Blocks Id System /dev/sda1 1 11749 94373811 7 HPFS/NTFS /dev/sda2 11871 38914 217219073 5 Extended /dev/sda3 * 11750 11871 976896 83 Linux /dev/sda5 11871 38167 211220480 83 Linux /dev/sda6 38167 38914 5997568 83 Linux Partition table entries are not in disk order Mounted as: $ mount /dev/mapper/sda5_crypt on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) none on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /dev type devtmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) none on /dev/shm type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) /dev/sda3 on /boot type ext4 (rw) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) gvfs-fuse-daemon on /home/eddyp/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=eddyp) /dev/sda1 on /media/S3A6595D003 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions)

    Read the article

  • Ubuntu 9.10 + LXDE Error unmet dependencies

    - by skg
    I am working on Ubuntu 9.10 + LXDE as my current project. I am finding it difficult to install any new packages on this OS. For example, I need to install OpenCv package for qt webcam application, but every time it gives unmet dependencies error.And when i try to install dependencies it again show some more dependencies and so on and forms a circular loops. for example: sudo apt-get install libcv-dev .. .... The following packages have unmet dependencies: libcv-dev: Depends: libhighgui-dev (=1.0.0-6.2ubuntu1) but it is not going to installed. E: Broken packages Then I try to install libhighgui-dev as follow: sudo appt-get install libhighgui-dev .. ... The following packages have unmet dependencies: libhighgui-dev: Depends: libgtk2.0-dev but it is not going to installed E: Broken packages And this goes on never ending. Please suggest me something, as i have googled a lot and did not found any help. It may be , i m missing some primary packages to be installed.But how to find it? Any suggestion/help/link will be really appreciated. Thanks in Advance.

    Read the article

  • Canon MG6100 series USB printer receives job but doesn't physically print

    - by Old-linux-fan
    Printer MP6150 driver installed itself upon plugging in the printer. Printer is recognized (lsusb shows it) but does not mount. If the printer is recognized, the driver must be working (or?), but something is blocking the system from mounting the printer. Tried the usual things: power of printer, restart Ubuntu etc. Listed below result of lsusb and fstab: hans@kontor-linux:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 04a9:174a Canon, Inc. Bus 002 Device 002: ID 1058:1001 Western Digital Technologies, Inc. External Hard Disk [Elements] Bus 004 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser hans@kontor-linux:~$ sudo cat /etc/fstab [sudo] password for hans: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=eaf3b38d-1c81-4de9-98d4-3834d674ff6e / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=93a667d3-6132-45b5-ad51-1f8a46c5b437 none swap sw 0 0

    Read the article

  • Can't install Skype on Ubuntu 12.04 64 bit

    - by Gabriel Alvim
    I've tried many different ways: I downloaded the file on the Skype website, which returned me this error "Cannot install ia-32-libs" I followed this instructions https://help.ubuntu.com/community/Skype and here is what I got: **W: Failed to fetch http://archive.canonical.com/ubuntu/dists/precise/partner/Packages/binary-amd64/Packages 404 Not Found [IP: 91.189.92.191 80] W: Failed to fetch http://archive.canonical.com/ubuntu/dists/precise/partner/Packages/binary-i386/Packages 404 Not Found [IP: 91.189.92.191 80] E: Some index files failed to download. They have been ignored, or old ones used instead.** I even tried this command line: sudo apt-get install lib32stdc++6 lib32asound2 ia32-libs libc6-i386 lib32gcc1 skype And this is what I got: **Error: need a repository as argument pandora@ubuntu:~$ sudo apt-get install lib32stdc++6 lib32asound2 ia32-libs libc6-i386 lib32gcc1 skype Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: ia32-libs : Depends: ia32-libs-multiarch skype : Depends: skype-bin E: Unable to correct problems, you have held broken packages.** I just don't know what to do anymore, if I can't use skype, I might as well not use ubuntu at all. Please, someone help

    Read the article

  • How to auto-mount a copied encrypted home

    - by LedZ
    How can I auto-mount and use my encrypted home that I copied to another partition on the same hard disk? I'm running Ubuntu 11.10. My encrypted home is on sda1. There I've 2 users: userA and userB. Another partition is sda3 on which I have some other Data. BTW, sda1 is formatted as EXT4, sda3 is formatted as EXT3. I did the following: I logged out from GUI (Gnome) and changed (using Ctrl+Alt+F1) to the shell. From there I logged in, changed to sudo (using sudo -s) . After then I created a new mountpoint (tmp) under /mnt (mkdir /mnt/tmp) mounted /dev/sda3 on that mountpoint /mnt/tmp (mount /dev/sda3 /mnt/tmp) copied my encrypted /home to /mnt/tmp using rsync (rsync --acvxASXH --progress --stats /home/ /mnt/tmp/). After the “copy-procedure” I looked to my “new home” in /mnt/tmp and there I found the following 3 folders: userA, userB, .ecryptfs My structure for /dev/sda3 mounted on /mnt/tmp looks like the following (userB in ecryptfs I've not listed): -userA ¦ +userB ¦ +.ecryptfs ¦ +userA ¦ + auto-mount ¦ + auto-umount ¦ + Private.mnt ¦ + Private.sig ¦ + wrapped-passphrase ¦ + .wrapped-passphrase.recorded ¦ + .Private + (encrypted file_1) + (encrypted file_2) + (encrypted file_n) Now I would like that this copy of the original home-directory should act with the same behavior as the original home-directory means, that it should be auto-mounted at reboot and give me access to my unencrypted files and after logout all my files should be encrypted again. Any suggestions?

    Read the article

  • 12.10 Wireless hotspot configuration and internet browsing - question

    - by Indian
    In our campus we have a leased line connection from a service provider, which has an external IP W.X.Y.Z. This connection is distributed from the server several sub-networks / subnets as follows: Faculty: 172.33....../ 255.255.0.0 Administration: 172.34......./255.255.255.0 Students: 172.35...../255.255.216.0 A student has a laptop with a fixed IP address 172.35.23.123 / 255.255.216.0 where the IP address is on the ethernet port. The gateways for internet access are 172.31.1.1 and 172.31.1.2. Further the student has a wireless port which is inaccessible in the hostel area. The OS of the student is Ubuntu 12.10. The student in the possession of an android phone on which he wishes to install specific software and therefore wishes to activate the internet therein. The student has already attempted the Wireless hotspot solution which works for 12.04 but has not been successful. Various instructions on the internet have helped the student to do the following Installation of dhcp server and hostapd: sudo apt-get install isc-dhcp-server sudo apt-get install hostapd File: /etc/network/interfaces auto lo iface lo inet loopback auto wlan0 iface wlan0 inet static address 10.10.0.1 netmask 255.255.255.0 dns-nameservers 172.31.1.1 172.31.1.2 File: /etc/dhcp/dhcpd.conf subnet 10.10.0.0 netmask 255.255.255.0 { range 10.10.0.2 10.10.0.4; option routers 10.10.0.1; option domain-name-servers 172.31.1.1 172.31.1.2; default-lease-time 6000; max-lease-time 72000; } File: /etc/hostapd/hostapd.conf interface=wlan0 driver=nl80211 ssid=my_hotspot channel=1 hw_mode=g auth_algs=1 wpa=3 wpa_passphrase=1234567890 wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP CCMP rsn_pairwise=CCMP File: /etc/default/hostapd RUN_DAEMON=”yes” DAEMON_CONF=”/etc/hostapd/hostapd.conf” DAEMON_OPTS=”-dd” File: /etc/default/isc-dhcp-server INTERFACES=”wlan0” File: /etc/rc.local iptables -t nat -A POSTROUTING -s 10.10.0.0/16 -o eth0 -j MASQUERADE exit 0 After all the configuration, the computer is restarted. The student can see that the hotspot named “my_hotspot” is available. The hotspot also awards an address to the android phone. The student will now be able to browse the internet.

    Read the article

  • Fixing dpkg after installation of broken packages? [closed]

    - by Amith KK
    Possible Duplicate: How to remove all associated files and configuration settings of an app installed through 'force architecture' command I installed a broken package, and now apt-get/aptitude is failing with trying to remove it Each time I run a apt operation, this is the message I get: Removing crossplatformui ... ztemtvcdromd: no process found dpkg: error processing crossplatformui (--remove): subprocess installed post-removal script returned error exit status 1 No apport report written because MaxReports is reached already Errors were encountered while processing: crossplatformui E: Sub-process /usr/bin/dpkg returned an error code (1) running sudo apt-get install -f gives me this: amith@amith-desktop:~$ sudo apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be REMOVED: crossplatformui 0 upgraded, 0 newly installed, 1 to remove and 1123 not upgraded. 1 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? Y (Reading database ... 340804 files and directories currently installed.) Removing crossplatformui ... ztemtvcdromd: no process found dpkg: error processing crossplatformui (--remove): subprocess installed post-removal script returned error exit status 1 Errors were encountered while processing: crossplatformui E: Sub-process /usr/bin/dpkg returned an error code (1) How do I fix this?

    Read the article

  • Software Center empty "No usefulness from server" "no username in config file"

    - by Theron G. Burrough
    I upgraded to 12.04 LTS and ran Software Center while a few things were running, and crashed. (2 GB RAM on a Netbook.) On reboot, Ubuntu One interface would not find any programs, neither installed (to run) nor available for download. So I launched Software Center, which opens, but does nothing. I click "Close" button and get a "Force Quit?" box. So I quit. Did research, learned to run Software Center from Terminal: 2012-04-29 23:14:36,978 - softwarecenter.backend.reviews - WARNING - Could not get usefulness from server, no username in config file Then tried the below without success: Reinstallation of software center: sudo apt-get install --reinstall software-center Didn't work. Found this in a post: remove the config file for software-center then log out and back in sudo rm -rf ~/.config/software-center Didn't work. Reinstalled Software Center with Synaptic Package Manager. Still no dice! And I am a Linux newbie, so I don't know where the Dickens that config file is. Help appreciated.

    Read the article

  • HTC Android device mounted as USB drive is read-only unless I'm root

    - by Ian Dickinson
    When I connect my HTC Incredible S to my Ubuntu 10.10 system as a USB drive, the device seems to mount OK, but is read-only unless I access it as root. For example, if I run nautilus, I can't drag and drop files to the SD-card in the phone, but if I run sudo nautilus I can. I have USB debug support set on the phone (Applications > Development > USB debugging) and I have added a rule for the device in /etc/udev/rules.d/51-android.rules on my Ubuntu system. Any suggestions as to how I can mount the drive so that I can copy content to the SD card without needing to sudo? Update Following advice from waltinator, I added the following line to my /etc/fstab: UUID=3537-3834 /media/usb1 vfat rw,user,noexec,nodev,nosuid,noauto However, the Android device is still being auto-mounted on /media/usb1 with uid and gid root. Update 2 syslog output: Nov 21 23:38:40 rowan-15 usbmount[4352]: executing command: mount -tvfat -osync,noexec,nodev,noatime,nodiratime /dev/sdd1 /media/usb1 Nov 21 23:38:40 rowan-15 usbmount[4352]: executing command: run-parts /etc/usbmount/mount.d

    Read the article

  • Couldn't pass the signin screen on ubuntu

    - by Amokrane
    I have an issue here with my computer using ubuntu 10.10 on a 64 bits machine. When I start it, I have the login screen, I enter my credentials but instead of starting the session it reloads the login screen again. I checked the disc using fsck and it seems clean. How should I proceed to diagnose and repair this issue? Thanks! [Edit] I went to the log files, this is what I got: auth.log pam_unix (gdm:session): session opened for user amokrane by (uid=0) pam_ck_connector (gdm:session): nox11 mode, ignoring PAM_TTY :0 pam_unix (gdm:session) :session closed for user amokrane messages.log No ACPI video bus found I also took a shot with my camera of the black screen that appears between the two login screens, it says something like: fsck from util-linux-ng 2.17.2 /dev/sdc4 : propre, xxxx files, xxxx blocs Starting AppArmor profiles Skipping profiles in /etc/apparmor.d/disable: usr.bin.firefox Setting sensors limits Starting postgreSQL ... /var/log/Xorg.0.log [ 25.375] (II) intel(0): Modeline "1920x1080"x60.0 172.80 ... [ 28.850] (II) Power Button: Close [ 28.850] (II) UnloadModule: "evdev" [ 29.910] (II) Power Button: Close [ 28.910] (II) UnloadModule: "evdev" [ 28.941] (II) AT Translated Set 2 keyboard: Close [ 29.000] (II) ImPS/2 Generic Wheel Mouse: Close [ 29.000] (II) UnloadModule: "evdev" [ 29.039] ddxSigGiveUp: Closing log Update I tried the following: Ctrl-Alt-F1 on the login screen (to runt the console). sudo pkill startx sudo rm /tmp/.X0-locl startx But it tells me that the x server is already running.

    Read the article

  • Update kernel patch for VMware Player 4.0.3

    As I stated some days ago, after upgrading to Ubuntu Precise Pangolin, aka 12.04 LTS, I had a minor obstacle with VMware products. Today, VMware offered to upgrade to Player 4.0.3 due to security-related reasons. Initially, I thought that this update might have the patch for kernel 3.2.0 integrated but sadly that is not the case. 'Hacking' the kernel patch My first intuitive try to run the existing patch against the sources of VMware Player 4.0.3 failed, as the patch by Stefano Angeleri (weltall) is originally written explicitely against Workstation 8.0.2 and Player 4.0.2. But this is nothing to worry about seriously. Just fire up your favourite editor of choice and modify the version signature for VMware Player, like so: nano patch-modules_3.2.0.sh And update line 8 for the new version: plreqver=4.0.3 Save the shell script and run it as super-user (root): sudo ./patch-modules_3.2.0.sh In case that you previously patched your VMware sources you have to remove some artifacts beforehand. Otherwise, the patch script will inform you like so: /usr/lib/vmware/modules/source/.patched found. You have already patched your sources. Exiting In that case, simply remove the 'hidden' file and run the shell script again: sudo rm /usr/lib/vmware/modules/source/.patchedsudo ./patch-modules_3.2.0.sh To finalise your installation either restart the vmware service or reboot your machine. On first start VMware will present you their EULA which you have to accept, and everything gets back to normal operation mode. Currently, I would assume that in case of VMware Workstation 8.0.3 you can follow the same steps as just described.

    Read the article

  • How to install nvidia drivers (GT 440 ) on Xubuntu 12.10 , screen res gone to 640x480 :(

    - by shaggyjack
    Hi all after days of endless googling I finally gave in and decided to try and directly ask for help. I have just installed Xubuntu and updated to 12.10 on a pretty old (12 years) machine, and I am now struggling to install the correct drivers for the nvidia 440 gt card.. I have managed to get "additional drivers" but the app does not show in the menu, I went through a few procedures which ended up in my screen going no higher than 640x480, and tried all the sudo apt-get variations with nvidia-current and current updates... I think I got the right version of the drivers ( 93.43.07 ) but they won't install from terminal as they say I am running an X server. So I learnt how to shut the graphic interface but then I try and install them from there but after I write the exact same command (sudo home/username/Downloads/NVIDIA-Linux-x86-96.43.07.pkg1.run ) nothing happens and the terminal says something like command not found. I am desperate for help if anybody could point me in the right direction that would be greatly appreciated. There are lots of similar topics on installing nvidia drivers but I seem to understand that current drivers are no good for my old GPU. So if anybody could show me how to install the right version that would be excellent. Thanks in advance! Jack

    Read the article

  • Hibernation to a swap file 12.04, fragfile output

    - by MrHug10
    I've been trying for some time now, to get hibernation working in Ubuntu 12.04 on my Dell XPS17. I dualboot Windows 7 and Ubuntu, each having their own partition and one shared partition for all my data and documents. As I would like to be able to swtich from ubuntu to windows without losing all the things I was currently doing in Ubuntu, I would like to be able to use hibernation. In order to achieve this I've followed the information at http://ubuntuforums.org/showthread.php?t=1042946. Only instead of creating my swap file on my linux partition (which is formatted: ext4), I've chosen to create one on my shared partition (which is formatted: ntfs). There is a problem with this though (at least, that's what I think the problem is), because when I call: sudo filefrag -v /media/data/Ubuntu_Swap_Space/6GiB.swap, I get the following output: Filesystem type is: 65735546 File size of /media/Data/Ubuntu_Swap_Space/6GiB.swap is 6442450944 (1572864 blocks, blocksize 4096) Discontinuity: Block 22 is at 25829097 (was 232498) /media/Data/Ubuntu_Swap_Space/6GiB.swap: 2 extents found So I'm not sure what I need to fill in as an offset to follow the rest of the earlier mentioned information. I've tried both the location of block 22 and the number that is listed after that, but when I then try sudo pm-hibernate nothing happens and this shows up in my /var/log/pm-suspend.log s2disk: Could not use the resume device (try swapon -a). Reason: No such device Hope someone can help me out with this! If you need more information about anything, please let me know!

    Read the article

  • Routing tables don't show ppp0 after 12.04 kernel upgrade to 3.5.0: Haier CE682 modem configuration

    - by ubunsteve
    I'm trying to get my Haier CE682 EVDO modem, model number 201e:1022 to work in ubuntu 12.04 kernel 3.5.0-030500-generic #201207211835 . I had it working in a previous 12.04 kernel, using compat-wireless and these instructions http://zulkhamsyahmh.blogspot.com/2012/05/install-smartfren-haier-ce682-on-ubuntu.html, and to get it working had to edit the routing tables so that there was a ppp0 showing up, as suggested at http://www.linuxquestions.org/questions/slackware-14/wvdial-is-connecting-but-im-unable-to-do-anything-714861/ Network manager doesn't work with this modem, so I use either wvdial or gpppon to connect to it, both which work (after I run the command sudo modprobe usbserial vendor=0x201e product=0x1022 ) This is the output of when I connect with gpppon to the modem: Using interface ppp0 Connect: ppp0 <-- /dev/ttyUSB0 sent [LCP ConfReq id=0x1 ] rcvd [LCP ConfAck id=0x1 ] rcvd [LCP ConfReq id=0x2 ] sent [LCP ConfAck id=0x2 ] sent [LCP EchoReq id=0x0 magic=0x819c86db] rcvd [CHAP Challenge id=0x1 <1ac8f12799e953967a3cc222c9254690, name = ""] sent [CHAP Response id=0x1 <6f12a903dc40915ca2761c17b87f8fbd, name = "smart"] rcvd [LCP EchoRep id=0x0 magic=0x0] rcvd [CHAP Success id=0x1 ""] CHAP authentication succeeded CHAP authentication succeeded sent [CCP ConfReq id=0x1 ] sent [IPCP ConfReq id=0x1 ] rcvd [IPCP ConfReq id=0x1 ] sent [IPCP ConfAck id=0x1 ] rcvd [CCP ConfReq id=0x1] sent [CCP ConfAck id=0x1] rcvd [CCP ConfRej id=0x1 ] sent [CCP ConfReq id=0x2] rcvd [IPCP ConfRej id=0x1 ] sent [IPCP ConfReq id=0x2 ] rcvd [CCP ConfAck id=0x2] rcvd [IPCP ConfNak id=0x2 ] sent [IPCP ConfReq id=0x3 ] rcvd [IPCP ConfAck id=0x3 ] not replacing existing default route via 192.168.3.1 local IP address 10.191.248.154 remote IP address 10.17.95.25 primary DNS address 10.17.3.244 secondary DNS address 10.17.3.245 as you can see there is a problem with "not replacing existing default route via 192.168.3.1" This it the out put of route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 192.168.3.1 0.0.0.0 UG 0 0 0 wlan0 link-local * 255.255.0.0 U 1000 0 0 wlan0 192.168.3.0 * 255.255.255.0 U 2 0 0 wlan0 I had tried these commands, which had previously worked in the earlier kernel: route del default route add default ppp0 but that broke my wireless internet connection. I then added the default routing as shown above with sudo route add default gw 192.168.3.1 wlan0 So it seems I need to add or change the routing to show a ppp0 connection, but I don't know how to do that.

    Read the article

  • Failed to fetch *.deb Size mismatch, then packages with unmet dependencies [solved]

    - by user113907
    I recently bought the wonderfully looking and reviewed Amnesia The Dark Descent and I'm trying to install it. The first time I tried to download it, I had to stop in the middle of the download (may have broken something). The second time I tried to download, at the end of the download it gave me the following error: Failed to fetch https://private-ppa.launchpad.net/commercial-ppa-uploaders/amnesia/ubuntu/pool/main/a/amnesia/amnesia_1.2.1-0ubuntu2_i386.deb Size mismatch Now, whenever I try to download it, it gives me this error: The following packages have unmet dependencies: amnesia: Depends: libalut0 (>= 1.0.1) but it is not going to be installed Depends: libc6 (>= 2.4) but 2.15-0ubuntu10.3 is to be installed Depends: libfontconfig1 (>= 2.8.0) but 2.8.0-3ubuntu9.1 is to be installed Depends: libfreetype6 (>= 2.2.1) but 2.4.8-1ubuntu2 is to be installed Depends: libgcc1 (>= 1:4.1.1) but 1:4.6.3-1ubuntu5 is to be installed Depends: libopenal1 (>= 1:1.13) but 1:1.13-4ubuntu3 is to be installed Depends: libsdl1.2debian (>= 1.2.10-1) but 1.2.14-6.4ubuntu3 is to be installed Depends: libstdc++6 (>= 4.1.1) but 4.6.3-1ubuntu5 is to be installed Depends: libxft2 (> 2.1.1) but 2.2.0-3ubuntu2 is to be installed Depends: zlib1g (>= 1:1.1.4) but 1:1.2.3.4.dfsg-3ubuntu4 is to be installed I already searched the net and ran a few command line commands. Ex: sudo dpkg --configure -a sudo apt-get install -f Or configure the software packages to download from Main instead of the local UK server. But I'm really not figuring out a solution. I have a fresh install of the latest LTS (12.04). The only non-standard thing so far is that I installed gnome-shell (?) because I really can't stand Unity. Help would be much appreciated. I am currently more than entertained enough with World of Goo and Command & Conquer, but I will want to play Amnesia in the close future.

    Read the article

  • wireless card not detected

    - by user281219
    i have a old HP Compaq NX6125 with a new lunbuntu 14.04 32 bits install , but the wireless card is not working I have already done this steps and the wireless leds on the laptop are on but can't see any where the wireless interface , cloud`t do the last two steps . sudo apt-get remove bcmwl-kernel-source sudo apt-get install firmware-b43-installer b43-fwcutter Then Reboot And you need to activate the card from settings/network/wireless make it ON After this search for wireless icon at the task bar and look for your wifi. lshw -class network: *-network:0 description: Ethernet interface product: NetXtreme BCM5788 Gigabit Ethernet vendor: Broadcom Corporation physical id: 1 bus info: pci@0000:02:01.0 logical name: eth0 version: 03 serial: 00:0f:b0:f7:d1:0f size: 100Mbit/s capacity: 1Gbit/s width: 32 bits clock: 66MHz capabilities: pm vpd msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.134 duplex=full firmware=5788-v3.26 ip=192.168.1.120 latency=64 link=yes mingnt=64 multicast=yes port=twisted pair speed=100Mbit/s resources: irq:23 memory:d0000000-d000ffff *-network:1 description: Network controller product: BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller vendor: Broadcom Corporation physical id: 2 bus info: pci@0000:02:02.0 version: 02 width: 32 bits clock: 33MHz capabilities: bus_master configuration: driver=b43-pci-bridge latency=64 resources: irq:22 memory:d0010000-d0011fff *-network description: Wireless interface physical id: 1 logical name: wlan2 serial: 00:14:a5:77:9e:10 capabilities: ethernet physical wireless configuration: broadcast=yes driver=b43 driverversion=3.13.0-29-generic firmware=666.2 link=no multicast=yes wireless=IEEE 802.11bg

    Read the article

  • Why is LSHW Only listing one of my two HDDs?

    - by Mark
    I have a 120GB HDD and a 1TB HDD in the system. I installed Ubuntu Server using LVM on the 120GB. After installation I added the 1TB to the existing volume group and added 10GB to /home as a test. My understanding is that lshw is supposed to list hardware. What's the difference here? mark@server:~$ sudo lshw -short -c disk H/W path Device Class Description ========================================================= /0/100/1f.2/0 /dev/sda disk 120GB ST3120026AS /0/100/1f.2/1 /dev/cdrom disk DVD+-RW GH50N /0/1/0.0.0 /dev/sdc disk SCSI Disk /0/1/0.0.1 /dev/sdd disk SCSI Disk /0/1/0.0.2 /dev/sde disk SCSI Disk /0/1/0.0.3 /dev/sdf disk SCSI Disk The 1TB only shows up as a volume, not as a disk. mark@server:~$ sudo lshw -short .... /0/100/1f.2/0 /dev/sda disk 120GB ST3120026AS /0/100/1f.2/0/1 /dev/sda1 volume 476MiB Linux filesystem partition /0/100/1f.2/0/2 /dev/sda2 volume 111GiB Linux LVM Physical Volume partition /0/100/1f.2/1 /dev/cdrom disk DVD+-RW GH50N /0/100/1f.2/0.0.0 /dev/sdb volume 931GiB WDC WD1001FALS-0 Thanks, Mark

    Read the article

  • VMware Kernel Module Updater hangs on Ubuntu 13.04

    VMware Player has a nice auto-detection of kernel changes, and requests the user to compile the required modules in order to load them. This happens from time to time after a regular update of your system. Usually, the dialog of VMware Kernel Module Updater pops up, asks for root access authentication, and completes the compilation. VMware Player or Workstation checks if modules for the active kernel are available. In theory this is supposed to work flawlessly but in reality there are pitfalls occassionally. With the recent upgrade to Ubuntu 13.04 Raring Ringtail and the latest kernel 3.8.0-21 the actual VMware Kernel Module Updater simply disappeared and the application wouldn't start as expected. When you launch VMware Player as super user (root) the dialog would stall like so: VMware Kernel Module Updater stalls while stopping the services Prior to version 5.x of VMware Player or version 7.x of VMware Workstation you would run a command like: $ sudo vmware-config.pl to resolve the module version conflict but this doesn't work anyway. Solution Instead, you have to execute the following line in a terminal or console window: $ sudo vmware-modconfig --console --install-all Those switches are (as of writing this article) not documented in the output of the --help switch. But VMware already documented this procedure in their knowledge base: VMware Workstation stops functioning after updating the kernel on a Linux host (1002411). Update As of today I had the first kernel upgrade to version 3.8.0-22 in Ubuntu 13.04. Don't even try it without vmware-modconfig...

    Read the article

  • Init.d script gets return code 1 when calling itself, how can I get output?

    - by Per
    My question is, how can I modify the script so that it will tell me what goes wrong? The scenario is this: I'm trying to get Sonatype Nexus to start as a service in Ubuntu 10.04, and it just will not work. (I'm not looking for help on how to run Nexus, but on how to get some useful output from a script) It works when invoking it with sudo /etc/init.d/nexus start but fails when using sudo service nexus start I have run the update-rc.d command on it, and done everything according to instructions. The nexus init.d-script has a point where it calls itself when it detects that it should run as another user ('nexus'): su -m $RUN_AS_USER -c "\"$REALPATH\" $2" which expands to su -m nexus -c '"/opt/nexus-2.0.2/bin/jsw/linux-x86-64/nexus" start' when adding the -x debug flag to the script. This command results in return code 1. It never executes - I've set -x debug flag on the script, placed echo commands with redirect to file at the start of script to trace, etc. I cannot get any output telling me why the command will not execute. I've tried appending redirect to file after the above script line, inside the quotes, outside, any way I could imagine. All info I can get is by inserting a line echo $? after the su line, which outputs '1'. Is there a way I can see what happens when the su command runs?

    Read the article

  • Issues in pulse audio in Ubuntu 11.10

    - by Kamal
    Good Morning All. I am a new ubuntu user. So please forgive me if this question is too basic. I have installed Ubuntu 11.10 in my machine. I have logged in as USER_A. My external audio device is a Headset and I was able to hear the audio properly. I need to join my Ubuntu machine to a window's domain (my office server). I followed the steps explained in http://www.ghacks.net/2010/04/21/join-a-ubuntu-machine-to-a-windows-domain/ and was successful in joining my ubuntu machine to the windows domain. sudo apt-get install likewise-open5 sudo domainjoin-cli join DOMAIN USER_B Now when I logged in as USER_B, there is no audio for this user in the same machine. I crossed check with my User_A account. There is no issues with the sound for User_A. Only for User_B, there is no audio. When I checked the sound settings of User_B, there is no device listed in Hardware, Input and Output. Whereas for User A, my Headset is listed in Input and Output. Can anyone please help me on this. Why there is no sound for User_B? Thank you.

    Read the article

< Previous Page | 289 290 291 292 293 294 295 296 297 298 299 300  | Next Page >