Search Results

Search found 12836 results on 514 pages for 'isp org'.

Page 308/514 | < Previous Page | 304 305 306 307 308 309 310 311 312 313 314 315  | Next Page >

• OpenWrt logging: how to find out "wifi deauthentication"

  - by user62367

  If someone starts to use the wifi, i can see that with logread: Jan 23 21:04:47 router daemon.info hostapd: wlan0: STA XX:XX:XX:XX:XX:XX IEEE 802.11: authenticated But how can i see, that he/she's disconnecting? Theres no "bla-bla deauthenticated bla" line in logread, or even a thing that points to that someone get's disconnected.. I tried to google: http://wiki.openwrt.org/doc/uci/system But it doesn't writes about loglevel. Can anyone help me find out, how to find out that someone disconnects it's wifi from the router? The logread doesn't even writes a line when someone disconnects. Please help!! It's important! Thank you!:\

  Read the article

• JMeter Stress testing

  - by mcondiff

  MAMP server hosting a Joomla instance. I'd like to hear the community's thoughts on the best way to stress test the server and find it's breaking point on concurrent users etc. Currently I have setup a test plan which I have going to the home page, grabbing the index.php, css, js and all images and have run tests on 1 to 100 users and a varying number of loops. What I'd like to know is how do I determine at what number of concurrent requests or looping requests is a good way to gauge if my server can handle the proposed increase in traffic? What is a good KB/sec, Throughput, Average, Max, Min via the Aggregate Report and at what number of threads/loops etc? I have googled and have not found immediate answers to these questions and thought to come here. More or less I have just used this http://jakarta.apache.org/jmeter/usermanual/jmeter_proxy_step_by_step.pdf to guide me and then I have been winging it in terms of Thread and Loop numbers. Any light shed on these subject would be much appreciated.

  Read the article

• Icinga error "Icinga Startup Delay does not exist" although it does

  - by aaron

  I just installed icinga to monitor my server following this guide: http://docs.icinga.org/0.8.1/en/wb_quickstart-idoutils.html Everything built and installed correctly, but icinga is reporting a critical error with the reason: "The command defined for service Icinga Startup Delay does not exist" However, I can see that ${ICINGA_BASE}/etc/objects/localhost.cfg contains: define service{ use local-service ; Name of service template to use host_name localhost service_description Icinga Startup Delay check_command check_icinga_startup_delay notifications_enabled 0 } and ${ICINGA_BASE}/etc/objects/commands.cfg contains: define command { command_name check_icinga_startup_delay command_line $USER1$/check_dummy 0 "Icinga started with $$(($EVENTSTARTTIME$-$PROCESSSTARTTIME$)) seconds delay | delay=$$(($EVENTSTARTTIME$-$PROCESSSTARTTIME$))" } both of these files had not been modified since the whole make/install process. I am running on Ubuntu 10.04, most recent build of icinga-core, and apache2 2.2.14 What must I do to tell Icinga that the command exists? Or is the problem that check_dummy does not exist? Where or how would I define that?

  Read the article

• How do I run a non-service program as a service on Windows 2008 Server?

  - by Lasse V. Karlsen

  I found this page that tells me how to set up Windows Live Sync as a background service on Windows 2003 Server, unfortunately the resource kit tools for 2003 that are mentioned does not work on 2008 server. http://mswhs.freeforums.org/windows-live-sync-as-a-service-on-whs-t623.html Also, apparently there is no resource kit tools downloadable for Windows 2008 Server that I can find. Perhaps someone has a link to the relevant tools? (INSTSRV.EXE and SRVANY.EXE.) Using just plain SC.EXE doesn't work as I assume that the program is then required to be a normal service, and not just any executable. What other options do I have? Can I use the task scheduler on 2008 server to start the WindowsLiveSync executable, will that work? I need the executable to stay running even after I've logged off from the server.

  Read the article

• Asterisk - Trying to use call files to create a conference call between two dynamic numbers

  - by Hank

  I'm trying to setup an Asterisk system that will allow me to create a conference call between two dynamic numbers. It seems I can use 'call files' to make Asterisk initiate the call without needing an incoming call - http://www.voip-info.org/tiki-index.php?page=Asterisk+auto-dial+out This example seems to be what I'd need: Channel: SIP/mytrunk/12345678 MaxRetries: 2 RetryTime: 60 WaitTime: 30 Context: callme Extension: 800 Priority: 2 I can generate this file with some scripting language and then place it into the Asterisk Call File folder. The problem I'm having is: How do I call out to two numbers and join them in a conference call? The MeetMe plugin/extension seems to be what I need in terms of conference calling, I'm just unsure as to how I'd use the two together and join them. Also, is it possible to have multiple 2-person conference calls at the same time? Is setting this up as simple as setting aside X amount of 'channels' in the meetme.conf?

  Read the article

• CPU Usage at 100% with "Hardware Interrupts"

  - by eventualEntropy

  After turning on my desktop one day, I found that my CPU usage was maxed out at 100%, with 99% of that going to hardware "Interrupts". I tried to enable/disable all my devices one by one through the device manager, and found that I could get the CPU usage used by the Interrupts down to 50% by disabling all devices labelled "USB Host Controller" (except the ones for the mouse/keyboard). I found that I also got 10-20% more from disabling "High Definition Audio Controller". Following the tutorial at: http://www.msfn.org/board/topic/140263-how-to-get-the-cause-of-high-cpu-usage-by-dpc-interrupt/ Led me to similar conclusions (that is, that the culprit is mostly "USB Host Controller"): I've tried updating my asus motherboard driver and my video card driver. This is on Windows 7 64 bit. I've spent hours trying to figure this out and I'm running out of ideas short of formatting (which might still not fix it!).

  Read the article

• iis not listening on port 80

  - by user57467

  We have server 2003 and ISA 2004 with IIS 6 on same machnie. Everything worked well till yesterday, when we try to make some new rule in ISA..but this is a long story... Unfortunatelly something happend with our intranet site. Our site is on the port 80, but if we try to open on this client machines then we got and error page (which error page is our provider): 403-forbidden; Remote host not listening, the remote host is not prepared to acceppt the connection request. On the server i can open the site with port 80. If i change the port number in the iis and try to open the site with the port, then works well. I try to shut down IIS and start apache with a simple page. On the server works well but in clients the problem is the same, so i think this is not an IIS related problem. In the ISA we have a web pub rule, with port 80, no auth. Im pulling out my hair, please help. after uninstall and reinstall ISA, de sites work well, till i configure the upstream proxy in the conf/network/web chaining menu and then everything went same... So something wrong with the web-proxy / upstream function... (all my http request forward to my upstream proxy). That was the set long time ago...but a few day ago somehing went wrong... I think maybee our ISP spoiled something..tomorrow i try to figure out... But one more thing: I make a new rule before the default rule in the conf/network/web chaining menu. Every request go to the server not redirected.. Redirect to upstream server.... So if the request goes to our server (our site) then handled locally, and if not then go to upstream proxy and voilllaaa....i tougth... But unfortunatelly: our website work well, but internet work extreamly slowly..:( Maybee with single adapter i can made this? I have to handle all request locally or i have to send all to upstream? I cant filter it?

  Read the article

• Recommended SpamAssassin update channels?

  - by Timo Geusch

  I'm currently using SpamAssassin on a couple of mail servers that I look after. SpamAssassin runs in the context of amavisd-new on those servers and with the usual bunch of plugins (FuzzyOCR, DCC, pyzor, razor). Currently the servers are getting their rule updates from the default SpamAssassin update channel (updates.spamassassin.org). Overall the setup seems to be reasonably effective but some types of spam seem to wander right through it even though I've made repeated attempts at training spamassassin. My guesstimate is that about 85%-90% of the spam that gets through policyd-weight makes it through the filters and it's been getting a lot worse recently as spammers are getting better at working their way through filters. Can someone recommend additional sources of filters to make SpamAssassin more effective? So far I've found OpenProtect's update channel but are there others worth looking at?

  Read the article

• Trying to configure domain-based access via htaccess file.

  - by kenja

  I've created an account with no-ip.com that registers my ip with a subdomain of their service. When I do an nslookup, I see that the service is working and that my domain is being shown. Now I want to provide access to that subdomain on the admin site of our server which is protected by htaccess IP restrictions. When I try to add the new domain to my script it does not work. Am I doing something wrong? I'm basically trying to make my laptop so it can log in from no matter when I'm at while still preventing all other IPs from accessing the site. ## password begin ## AuthName "Restricted Access" AuthUserFile /usr/www/users/site/.passwd AuthType Basic Require valid-user Order deny,allow Deny from all Allow from 69.1.122.161 mysubdomain.no-ip.org Satisfy All

  Read the article

• Dynamic DNS with Comcast

  - by colithium

  I've just recently moved across town. Previously, I had Dynamic DNS set up so I could remotely connect to my desktop (primarily to use TightVNC). My ISP was Comcast and I'm in the Denver, Colorado area. Currently, I'm still with Comcast and still in Denver. My router connects to the internet just fine and my Dynamic DNS record over at DynDNS did get updated with my router's current external IP address. So my router, DynDNS, and public DNS records all agree what my IP address is. However, I can't actually connect to anything from the outside world. My trace route to Google looks something like: Tracing route to google.com [74.125.19.147] 1 3 ms 1 ms 1 ms 192.168.1.1 (this is the internal IP address of my router) 2 * * * Request timed out. 3 9 ms 8 ms 10 ms te-8-2-ur02.wheatridge.co.denver.comcast.net [68.85.221.177] 4 12 ms 12 ms 19 ms te-0-8-0-2-ar02.aurora.co.denver.comcast.net [68.86.103.97] 5 16 ms 13 ms 11 ms pos-0-3-0-0-cr01.denver.co.ibone.comcast.net [68.86.91.1] 6 28 ms 28 ms 27 ms pos-0-9-0-0-cr01.dallas.tx.ibone.comcast.net [68.86.85.174] 7 29 ms 27 ms 28 ms pos-0-1-0-0-pe01.1950stemmons.tx.ibone.comcast.net [68.86.86.94] 8 66 ms 108 ms * 75.149.231.70 9 65 ms 68 ms 93 ms 72.14.233.77 10 67 ms 66 ms 66 ms 72.14.233.111 11 67 ms 67 ms 69 ms 216.239.43.144 12 68 ms 71 ms 73 ms 209.85.249.30 13 66 ms 66 ms 68 ms nuq04s01-in-f147.1e100.net [74.125.19.147] This is what the trace route looks like from an outside source to my DynDNS domain name: traceroute to 98.245.67.65 (98.245.67.65) 1 illuminati-130 138.67.130.61 2 138.67.63.253 138.67.63.253 3 vermiculite 138.67.253.20 4 csm-ct-gw 138.67.253.244 5 138.67.253.2 138.67.253.2 6 ge-7-24-ar01.denver.co.denver.comcast.net 68.86.128.17 7 te-0-4-0-0-ar02.denver.co.denver.comcast.net 68.86.179.21 8 te-9-3-ur01.wheatridge.co.denver.comcast.net 68.86.103.18 9 * * * {Times Out} Now my guess is, whatever is sitting just beyond my router (what the modem connects to) is gumming things up. Even though the routes aren't EXACTLY the same, that appears to be the spot that the trace route either stops or doesn't get a response. My question is, for Comcast networks (particularly in Denver), what would be the device that typically sits there? Is there anything I can do about it? That device seems to not respond to PING but does forward it along when I'm going outwards. But it looks like it eats it when the request is coming in. It's hard to prove that from these logs but I'm assuming that's the case because my router used to accept connections from the outside and I haven't changed anything on it.

  Read the article

• Windows explorer locks files

  - by John Prince

  I'm using Office 2010 & Windows 7 Home Premium 64-bit. My problem starts when I attempt to save e-mail messages to my PC that I have received via Outlook (my ISP is Comcast). I'm using the default .msg file extension option when I attempt to save these e-mails. The resultant files are locked and do not show the normal "envelope" icon. Instead, it’s a “blank page” icon with the right upper corner folded in. These files refuse to open either by double clicking on them or right clicking and trying to open them with Outlook. And when I return to Outlook, I discover that Outlook is now hung up and I have to close it via the Task Manager. To make matters worse, I’ve also discovered that every e-mail message that I've saved on my PC over the years has also somehow become locked and their original "envelope" icon has been replaced with the "blank page" icon. I found and installed an application called LockHunter. As a result, when I right click on a saved and locked e-mail message, I’ve given an option to find out what's locking it. Each time I'm told that the culprit is Windows explorer.exe. When I unlock the file the normal envelope icon is sometimes displayed (but not always) but at least the file can then be opened. But the file is still “squirrely” as it can’t be moved or saved to a folder until it’s unlocked again. On this second attempt, LockHunter says it’s now locked by Outlook.exe. By the way, I don't have this issue when I save Word, Excel & PowerPoint files; only with Outlook. I've exhausted every remedy that I can think of including: making sure that the file and folder options are checked to always show icons and not thumbnails; running the Windows 7 & Office 2010 repair options which find nothing amiss; running a complete system scan with Windows Malicious Software Removal Tool with negative results; verifying that Outlook is the default for opening e-mails; updating all of my applications via Secunia Personal Software Inspector; uninstalling every application that I felt was unnecessary; doing a registry cleanup via CC Cleaner; having Windows Security Essentials always on (it did find one Java Trojan recently which was quarantined and then deleted); uninstalling a bunch of non-Microsoft shell extensions; and deactivating all of the Outlook Add-ins and then re-activating each one. None of this solves the problem. I’d welcome any advice on how to resolve this.

  Read the article

• How to enable catch-all email in iRedMail Open Source edition?

  - by Matthias

  How to create catch-all email alias for domain in iRedMail Open Source edition? I know that's possible via LDAP and found the following instructions: http://iredmail.org/wiki/index.php?title=Addition/OpenLDAP/Catch-all The problem is how exactly to add this parameters via phpLDAPAdmin? I select "Create new entry here" and choose mailUser type. Then in step 2 first question is about "RDN" with select box "select RDN attribute". What should I choose as RDN? Which fields of the "Create Object" form should be filled? Unfortunetly there is completely no validation of user input and final errors does not contain explanation what's wrong Also when I try to import example from iredmail wiki phpldapadmin it gives LDIF Import Parse Error Description: A valid dn line is required [] dn line is: dn: [email protected],ou=Users,domainName=mydomain.eu,o=domains,dc=myserver,dc=pl

  Read the article

• How to setup VIM for php development?

  - by Ashwin kumar

  I have been trying a lot (but not smartly) to figure out setting up VIM, ctags, omnicomple for PHP development. On Googling I found this file. But have no clue how to use it. What have I done until now? Here it is: I am on Fedora 17 64-bit OS Logged in as root Found my VIM version to be VIM - Vi IMproved 7.3 (2010 Aug 15, compiled May 8 2012 15:05:51) Followed the install details as here http://www.vim.org/scripts/script.php?script_id=3171 install details Place in $HOME/.vim/autoload/phpcomplete.vim and enable the php ftplugin What else I am missing? How do I start using omnicomplete. (this is the first time I am using omnicomplete) Why didn't I try IDE's? I have a single core machine running LAMP stack. Didn't wanted to slow down everything and hence sticking to command line environment.

  Read the article

• Need help connecting to NAS externally-port forwarding and DDNS newbie

  - by Joel

  Hi folks, I just picked up a synology NAS, and I'm loving it for internal use, but I want to be able to access the NAS externally-both from my iPhone (3G) and from the net. I have a Linksys WRT54G-TM router. My first question is whether I have set up the dyndns correctly. On my computer that is on my network, if I put in mydomain.dyndns.org, I am taken to a password popup and when I enter my router login and password, my router admin page opens up. On the same computer, I get the same results if I use my external IP address, and if I use my internal IP 192.168.0.1 So that is all as expected. However, when I go to my iphone and turn off wifi, and try to connect with 3g to the external IP or the dnydns domain, I just get an error "Safari could not open the page because the server stopped responding". What's up?

  Read the article

• Snort: not logging anything

  - by ethrbunny

  My site seems to be the target of quite a bit of probing over the last few months. In an attempt to get a better handle on this I installed SNORT on one of the machines that has external exposure. Something must not be installed correctly as I see lots of probing in /var/log/messages but snort isn't logging anything. System: CentOS 6.2 (32 bit) Snort: (latest build and rules) Snort configured from this v excellent site: http://nachum234.no-ip.org/security/snort/001-snort-installation-on-centos-6-2/ snort running as daemon: /usr/local/bin/snort -d -D -i bond0 -u snort -g snort -c /etc/snort.d/snort.conf -l /var/log/snort The snort.log file is empty despite hundreds (or more) failed login attempts from individual IP addresses. Maybe Im missing the purpose of SNORT? I was hoping it would log this sort of info.

  Read the article

• Tomcat 6 IP restrictions

  - by KB22

  I need to protect a certain folder within a web application of mine from access from outside of an defined IP range. With O'Reilly's Tomcat Tips I figured that: <Context path="/path/to/secret_files" ...> <Valve className="org.apache.catalina.valves.RemoteAddrValve" allow="127.0.0.1" deny=""/> </Context> Is the way to go? I'm not that much into tomcat configuration so I'm dazzled a little as to where to put these restrictions. Do I put this Within my web.xml or is this a thing I need to add to some general tomcat conf file?

  Read the article

• Linux - Only first virtual interface can ping external gateway

  - by husvar

  I created 3 virtual interfaces with different mac addresses all linked to the same physical interface. I see that they successfully arp for the gw and they can ping (the request is coming in the packet capture in wireshark). However the ping utility does not count the responses. Does anyone knows the issue? I am running Ubuntu 14.04 in a VmWare. root@ubuntu:~# ip link sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 link/ether 00:0c:29:bc:fc:8b brd ff:ff:ff:ff:ff:ff root@ubuntu:~# ip addr sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 00:0c:29:bc:fc:8b brd ff:ff:ff:ff:ff:ff inet6 fe80::20c:29ff:febc:fc8b/64 scope link valid_lft forever preferred_lft forever root@ubuntu:~# ip route sh root@ubuntu:~# ip link add link eth0 eth0.1 addr 00:00:00:00:00:11 type macvlan root@ubuntu:~# ip link add link eth0 eth0.2 addr 00:00:00:00:00:22 type macvlan root@ubuntu:~# ip link add link eth0 eth0.3 addr 00:00:00:00:00:33 type macvlan root@ubuntu:~# ip -4 link sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 link/ether 00:0c:29:bc:fc:8b brd ff:ff:ff:ff:ff:ff 18: eth0.1@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default link/ether 00:00:00:00:00:11 brd ff:ff:ff:ff:ff:ff 19: eth0.2@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default link/ether 00:00:00:00:00:22 brd ff:ff:ff:ff:ff:ff 20: eth0.3@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default link/ether 00:00:00:00:00:33 brd ff:ff:ff:ff:ff:ff root@ubuntu:~# ip -4 addr sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever root@ubuntu:~# ip -4 route sh root@ubuntu:~# dhclient -v eth0.1 Internet Systems Consortium DHCP Client 4.2.4 Copyright 2004-2012 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0.1/00:00:00:00:00:11 Sending on LPF/eth0.1/00:00:00:00:00:11 Sending on Socket/fallback DHCPDISCOVER on eth0.1 to 255.255.255.255 port 67 interval 3 (xid=0x568eac05) DHCPREQUEST of 192.168.1.145 on eth0.1 to 255.255.255.255 port 67 (xid=0x568eac05) DHCPOFFER of 192.168.1.145 from 192.168.1.254 DHCPACK of 192.168.1.145 from 192.168.1.254 bound to 192.168.1.145 -- renewal in 1473 seconds. root@ubuntu:~# dhclient -v eth0.2 Internet Systems Consortium DHCP Client 4.2.4 Copyright 2004-2012 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0.2/00:00:00:00:00:22 Sending on LPF/eth0.2/00:00:00:00:00:22 Sending on Socket/fallback DHCPDISCOVER on eth0.2 to 255.255.255.255 port 67 interval 3 (xid=0x21e3114e) DHCPREQUEST of 192.168.1.146 on eth0.2 to 255.255.255.255 port 67 (xid=0x21e3114e) DHCPOFFER of 192.168.1.146 from 192.168.1.254 DHCPACK of 192.168.1.146 from 192.168.1.254 bound to 192.168.1.146 -- renewal in 1366 seconds. root@ubuntu:~# dhclient -v eth0.3 Internet Systems Consortium DHCP Client 4.2.4 Copyright 2004-2012 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0.3/00:00:00:00:00:33 Sending on LPF/eth0.3/00:00:00:00:00:33 Sending on Socket/fallback DHCPDISCOVER on eth0.3 to 255.255.255.255 port 67 interval 3 (xid=0x11dc5f03) DHCPREQUEST of 192.168.1.147 on eth0.3 to 255.255.255.255 port 67 (xid=0x11dc5f03) DHCPOFFER of 192.168.1.147 from 192.168.1.254 DHCPACK of 192.168.1.147 from 192.168.1.254 bound to 192.168.1.147 -- renewal in 1657 seconds. root@ubuntu:~# ip -4 link sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 link/ether 00:0c:29:bc:fc:8b brd ff:ff:ff:ff:ff:ff 18: eth0.1@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether 00:00:00:00:00:11 brd ff:ff:ff:ff:ff:ff 19: eth0.2@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether 00:00:00:00:00:22 brd ff:ff:ff:ff:ff:ff 20: eth0.3@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether 00:00:00:00:00:33 brd ff:ff:ff:ff:ff:ff root@ubuntu:~# ip -4 addr sh 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever 18: eth0.1@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default inet 192.168.1.145/24 brd 192.168.1.255 scope global eth0.1 valid_lft forever preferred_lft forever 19: eth0.2@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default inet 192.168.1.146/24 brd 192.168.1.255 scope global eth0.2 valid_lft forever preferred_lft forever 20: eth0.3@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default inet 192.168.1.147/24 brd 192.168.1.255 scope global eth0.3 valid_lft forever preferred_lft forever root@ubuntu:~# ip -4 route sh default via 192.168.1.254 dev eth0.1 192.168.1.0/24 dev eth0.1 proto kernel scope link src 192.168.1.145 192.168.1.0/24 dev eth0.2 proto kernel scope link src 192.168.1.146 192.168.1.0/24 dev eth0.3 proto kernel scope link src 192.168.1.147 root@ubuntu:~# arping -c 5 -I eth0.1 192.168.1.254 ARPING 192.168.1.254 from 192.168.1.145 eth0.1 Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 6.936ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.986ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 0.654ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 5.137ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.426ms Sent 5 probes (1 broadcast(s)) Received 5 response(s) root@ubuntu:~# arping -c 5 -I eth0.2 192.168.1.254 ARPING 192.168.1.254 from 192.168.1.146 eth0.2 Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 5.665ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 3.753ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 16.500ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 3.287ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 32.438ms Sent 5 probes (1 broadcast(s)) Received 5 response(s) root@ubuntu:~# arping -c 5 -I eth0.3 192.168.1.254 ARPING 192.168.1.254 from 192.168.1.147 eth0.3 Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 4.422ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.429ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.321ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 40.423ms Unicast reply from 192.168.1.254 [58:98:35:57:a0:70] 2.268ms Sent 5 probes (1 broadcast(s)) Received 5 response(s) root@ubuntu:~# tcpdump -n -i eth0.1 -v & [1] 5317 root@ubuntu:~# ping -c5 -q -I eth0.1 192.168.1.254 PING 192.168.1.254 (192.168.1.254) from 192.168.1.145 eth0.1: 56(84) bytes of data. tcpdump: listening on eth0.1, link-type EN10MB (Ethernet), capture size 65535 bytes 13:18:37.612558 IP (tos 0x0, ttl 64, id 2595, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.145 > 192.168.1.254: ICMP echo request, id 5318, seq 2, length 64 13:18:37.618864 IP (tos 0x68, ttl 64, id 14493, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.145: ICMP echo reply, id 5318, seq 2, length 64 13:18:37.743650 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 13:18:38.134997 IP (tos 0x0, ttl 128, id 23547, offset 0, flags [none], proto UDP (17), length 229) 192.168.1.86.138 > 192.168.1.255.138: NBT UDP PACKET(138) 13:18:38.614580 IP (tos 0x0, ttl 64, id 2596, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.145 > 192.168.1.254: ICMP echo request, id 5318, seq 3, length 64 13:18:38.793479 IP (tos 0x68, ttl 64, id 14495, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.145: ICMP echo reply, id 5318, seq 3, length 64 13:18:39.151282 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:39.615612 IP (tos 0x0, ttl 64, id 2597, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.145 > 192.168.1.254: ICMP echo request, id 5318, seq 4, length 64 13:18:39.746981 IP (tos 0x68, ttl 64, id 14496, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.145: ICMP echo reply, id 5318, seq 4, length 64 --- 192.168.1.254 ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4008ms rtt min/avg/max/mdev = 2.793/67.810/178.934/73.108 ms root@ubuntu:~# killall tcpdump >> /dev/null 2>&1 9 packets captured 12 packets received by filter 0 packets dropped by kernel [1]+ Done tcpdump -n -i eth0.1 -v root@ubuntu:~# tcpdump -n -i eth0.2 -v & [1] 5320 root@ubuntu:~# ping -c5 -q -I eth0.2 192.168.1.254 PING 192.168.1.254 (192.168.1.254) from 192.168.1.146 eth0.2: 56(84) bytes of data. tcpdump: listening on eth0.2, link-type EN10MB (Ethernet), capture size 65535 bytes 13:18:41.536874 ARP, Ethernet (len 6), IPv4 (len 4), Reply 192.168.1.254 is-at 58:98:35:57:a0:70, length 46 13:18:41.536933 IP (tos 0x0, ttl 64, id 2599, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 1, length 64 13:18:41.539255 IP (tos 0x68, ttl 64, id 14507, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 1, length 64 13:18:42.127715 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 13:18:42.511725 IP (tos 0x0, ttl 64, id 2600, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 2, length 64 13:18:42.514385 IP (tos 0x68, ttl 64, id 14527, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 2, length 64 13:18:42.743856 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 13:18:43.511727 IP (tos 0x0, ttl 64, id 2601, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 3, length 64 13:18:43.513768 IP (tos 0x68, ttl 64, id 14528, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 3, length 64 13:18:43.637598 IP (tos 0x0, ttl 128, id 23551, offset 0, flags [none], proto UDP (17), length 225) 192.168.1.86.17500 > 255.255.255.255.17500: UDP, length 197 13:18:43.641185 IP (tos 0x0, ttl 128, id 23552, offset 0, flags [none], proto UDP (17), length 225) 192.168.1.86.17500 > 192.168.1.255.17500: UDP, length 197 13:18:43.641201 IP (tos 0x0, ttl 128, id 23553, offset 0, flags [none], proto UDP (17), length 225) 192.168.1.86.17500 > 255.255.255.255.17500: UDP, length 197 13:18:43.743890 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 13:18:44.510758 IP (tos 0x0, ttl 64, id 2602, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 4, length 64 13:18:44.512892 IP (tos 0x68, ttl 64, id 14538, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 4, length 64 13:18:45.510794 IP (tos 0x0, ttl 64, id 2603, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.1.146 > 192.168.1.254: ICMP echo request, id 5321, seq 5, length 64 13:18:45.519701 IP (tos 0x68, ttl 64, id 14539, offset 0, flags [none], proto ICMP (1), length 84) 192.168.1.254 > 192.168.1.146: ICMP echo reply, id 5321, seq 5, length 64 13:18:49.287554 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:50.013463 IP (tos 0x0, ttl 255, id 50737, offset 0, flags [DF], proto UDP (17), length 73) 192.168.1.146.5353 > 224.0.0.251.5353: 0 [2q] PTR (QM)? _ipps._tcp.local. PTR (QM)? _ipp._tcp.local. (45) 13:18:50.218874 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:51.129961 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:52.197074 IP6 (hlim 255, next-header UDP (17) payload length: 53) 2001:818:d812:da00:200:ff:fe00:22.5353 > ff02::fb.5353: [udp sum ok] 0 [2q] PTR (QM)? _ipps._tcp.local. PTR (QM)? _ipp._tcp.local. (45) 13:18:54.128240 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 --- 192.168.1.254 ping statistics --- 5 packets transmitted, 0 received, 100% packet loss, time 4000ms root@ubuntu:~# killall tcpdump >> /dev/null 2>&1 13:18:54.657731 IP6 (class 0x68, hlim 255, next-header ICMPv6 (58) payload length: 32) fe80::5a98:35ff:fe57:e070 > ff02::1:ff6b:e9b4: [icmp6 sum ok] ICMP6, neighbor solicitation, length 32, who has 2001:818:d812:da00:8ae3:abff:fe6b:e9b4 source link-address option (1), length 8 (1): 58:98:35:57:a0:70 13:18:54.743174 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.87 tell 192.168.1.86, length 46 25 packets captured 26 packets received by filter 0 packets dropped by kernel [1]+ Done tcpdump -n -i eth0.2 -v root@ubuntu:~# tcpdump -n -i eth0.3 icmp & [1] 5324 root@ubuntu:~# ping -c5 -q -I eth0.3 192.168.1.254 PING 192.168.1.254 (192.168.1.254) from 192.168.1.147 eth0.3: 56(84) bytes of data. tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0.3, link-type EN10MB (Ethernet), capture size 65535 bytes 13:18:56.373434 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 1, length 64 13:18:57.372116 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 2, length 64 13:18:57.381263 IP 192.168.1.254 > 192.168.1.147: ICMP echo reply, id 5325, seq 2, length 64 13:18:58.371141 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 3, length 64 13:18:58.373275 IP 192.168.1.254 > 192.168.1.147: ICMP echo reply, id 5325, seq 3, length 64 13:18:59.371165 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 4, length 64 13:18:59.373259 IP 192.168.1.254 > 192.168.1.147: ICMP echo reply, id 5325, seq 4, length 64 13:19:00.371211 IP 192.168.1.147 > 192.168.1.254: ICMP echo request, id 5325, seq 5, length 64 13:19:00.373278 IP 192.168.1.254 > 192.168.1.147: ICMP echo reply, id 5325, seq 5, length 64 --- 192.168.1.254 ping statistics --- 5 packets transmitted, 1 received, 80% packet loss, time 4001ms rtt min/avg/max/mdev = 13.666/13.666/13.666/0.000 ms root@ubuntu:~# killall tcpdump >> /dev/null 2>&1 9 packets captured 10 packets received by filter 0 packets dropped by kernel [1]+ Done tcpdump -n -i eth0.3 icmp root@ubuntu:~# arp -n Address HWtype HWaddress Flags Mask Iface 192.168.1.254 ether 58:98:35:57:a0:70 C eth0.1 192.168.1.254 ether 58:98:35:57:a0:70 C eth0.2 192.168.1.254 ether 58:98:35:57:a0:70 C eth0.3

  Read the article

• Wiki & issue-tracking in one system?

  - by torbengb

  I'm looking for an integrated solution that combines documentation of a software system with tracking of bugs, change requests and feature requests. Requirements: Documentation using a wiki would be nice, preferably one supporting CamelCase or other automatic linking. Issue tracking must allow a customizable workflow and optional e-mail notifications. Known alternatives: FogBugz is an awesome issue tracker, but the wiki appears to be somewhat awkward. Trac's wiki is average (though not as nice as Foswiki.org) but I don't know how good the integrated issue tracker is. What would you recommend? What systems offer the best combination of documentation and issue tracking?

  Read the article

• DNS problems with Google on Windows 7

  - by awishformore

  Hello dear superuser community. I had no idea where to post this because it is a problem that completely baffles me. I have a lot of experience with network configuration, but I am completely out of ideas on how to fix this. I have a Fritz!Box branded router on my ISP 1&1 in Germany. My computer is connected to it with a normal Ethernet cable. I always manually set my IP on the computer and use the Google DNS servers for name resolution. I also tried OpenDNS and the result is the same. With that configuration the following happens: Google search responds with big delay Gmail, Google Calendar & Google Drive requests time out the majority of the time In order to troubleshoot, I set the network connection to DHCP for both IP & DNS. At that point, what happens is the following: Google search times out most of the time Gmail, Google Calendar & Google Drive work most of the time Sometimes, it happens that the sites that time out will come up, but weirdly enough, the pictures on the buttons will be missing. For instance, the magnifying glass on Google will be gone or the circle arrow on Gmail (but all buttons of course). All other websites load just fine - and very quickly. All other network functionality is completely unimpacted. The behaviour of fixed IP & Google DNS vs automatic IP & DNS is easily reproducible. I am going crazy trying to fix this as I have no idea what the hell is going on at this point. Here a list of the things I have tried thus far: Flushed the DNS Tried on different browsers (Works fine on my laptop by the way) Tried disabling Teredo & IPv6 stack Emptied all caches Checked the HOSTS file Rebooted the router Reset the router Reinstalled the network adapter Tracert displayes normal route until timing out at one point Ping usually doesn't work for the unreachable sites either Ran both complete Norton 360 & Kaspersky 2012 scan Ran Kaspersky Virus Removal Tool in safe mode Tried connection in safe mode & networking enabled If you have any ideas, please let me know. I'm getting desperate...

  Read the article

• How to recover bitlocker encrypted partition that is now 'unallocated'/'free space'?

  - by Atishay Jain

  My hard drive had 5 partitions(including 1(some 4-5GB) bit locker encrypted one). When I used disk mgmt I could view 2 partitions(24.4GB and 8.94GB) in green colour labeled Empty space. So, I wanted to merge them and I used minitool partition wizard for the purpose. I don't know, what that software did, but all I was left with 2 partitions and lots of green free space. I recovered 2 partitions using EaseUS partition master, but the bitlocker encrypted partition cannot be searched by it(and also minitool partition recovery). Now, the disk mgmt shows 2 free space partitions of 28.36GB and 8.94GB respectively. Here is a screenshot http://s14.postimage.org/4tvij041t/Screen_Shot003.jpg Please, tell me a way to recover the bitlocker encrypted partition that is showing as a free space in disk management. P.S. - It contains very important data.

  Read the article

• slow network in centos5 VM with centos5 host running KVM

  - by dan

  I setup KVM following the guide here: http://www.cyberciti.biz/faq/centos-rhel-linux-kvm-virtulization-tutorial/ I setup a bridged network and it worked fine except that the transfer speed is 200KB/s instead of the gigabit speed that I get on the host machine by itself. I tried editing the guest network settings to set "model=virtio" http://wiki.libvirt.org/page/Virtio but this just moves ifconfig-eth0 to ifconfig-eth0.bak in the VM and networking doesn't work at all. I tried moving ifconfig-eth0 back and starting up eth0, which works, but now the transfer speed is ~ 60KB/s I have no idea what else to try. Any suggestions would be greatly appreciated.

  Read the article

• IIS7 failover cluster across datacenters

  - by Scott

  Hello, I have servers in two different datacenters with each datacenter getting static IPs. What I would like to do is setup the servers as IIS7 servers and allowing them to failover from datacenter to datacenter with little (or preferably) no interruption. Servers on both sides are running Windows Server 2008 x64 with IIS7 (or 7.5 if needed). I am interested in how to point DNS traffic to the new datacenter without manual human intervention. For example: Datacenter A: IP: 192.168.1.115 Servers: Server 2008 x64 w/ IIS 7 Datacenter B: IP: 192.168.1.220 Servers: Server 2008 x64 w/ IIS 7 Other information: Domain Name: Example.org Domain DNS: 192.168.1.115 If Datacenter A connectivity went down (broken service line, etc.) how does the traffic know to route to Datacenter B on 192.168.1.220? Thanks, Scott

  Read the article

• Best Practise: DNS and VPN (with private network IPs)

  - by ribx

  I am trying to find the best solution for my DNS problem. We are running several services in our company that you can reach only over VPN. Other services, that are reachable through the internet got the domain ... At the moment all services inside the VPN network go by .local... These have an VPN IP of the private network 192.168.252.0/24. Clients reach from Linux over OSX to Windows. I can think of 4 possibilities to implement a DNS infrastructure: Most common: an internal DNS Server, that is pushed by the VPN. But this has several drawbacks: your DNS responses are limited to the speed of the VPN Connection and your own DNS server. Because of very complex websites, this can increase the time for a page to load quite a lot. Also: we have several VPNs that are not connected to each other and all of them have their own DNS server. Several DNS servers locally. These have to be configured by hand. And you have to use some third party tool like dnsmasq. If you start a DNS request, you ask your locally running DNS server, which decides which server to ask for which domain name. One college of mine uses such a solution with this OSX (I am sorry, I don't remember the name of the application). You use your domain hoster. Most of them have APIs available to manipulate your DNS entries. So you could pull your private network informations to your domain hoster. I am not sure whether they all accept private network IPs. But I guess there will be some problems in the same way as in number 4. The one we currently use, because it's for us the most logical choice: we forward the sub domain *.local.. to our own public DNS Server. This works quite good for some public DNS Servers like Google. But most ISPs do not forward the answers. Or don't do that always. Like my ISP sends me a positive result of the a DNS request of a *.local.. domain only every 10th time I make a nslookup. (Can someone explain this?) Here the real Question: Is there another solution we were not thinking about? Or: What of these methods do you use?

  Read the article

• Are there any tools for monitoring individual Apache virtual hosts in real-time?

  - by Dave Forgac

  I'm looking for a way to monitor and record Apache traffic, separated by virtual host. I am currently using Munin to capture this and other data for the entire server however I can't seem to find a way to do this by vhost. This link describes using a module called mod_watch which is apparently no longer in development: http://www.freshnet.org/wordpress/2007/03/08/monitoring-apaches-virtualhost-with-munin/ The file that is listed as being compatible with Apache 2.x is reported to have problems with missing vhosts an reporting data correctly. Does anyone know of a reliable way to determine real-time traffic per vhost? If I can find this it should be easy enough to write a new Munin plugin. Edit: What I'd really like to see is something similar to the Apache server-status scoreboard page with the number of connections / requests separated by virtual host. This would give me the ability to check which vhost may be experiencing a spike in traffic in real time and would also provide the data needed for a Munin module (or some alternative performance monitoring / analysis system.)

  Read the article

• Recovering Ubuntu 9.10 /Windows 7 dual boot with Wubi

  - by user56110

  I had installed Ubuntu 9.10 /Windows 7 dual boot with Wubi. I had no issues for about 9 months, and then after having to do a force reboot after ubuntu got hunng, and never goes past boot-up. On boot up, and selecting ubuntu, I get this error message: One or more of the mounts listed in /etc/fstab cannot yet be mounted: /: waiting for /dev/loop0 /tmp: waiting for (null) Press ESC to enter a recovery shell When I enter the recovery shell, I get this error message: General error mounting filesystem A maintainance shell will be started The maintenace shell does start- and I am able to access files. However, X-server does not work, so gedit, and similar applications does not work. I have done chkdsk on Windows, and this didnt solve nmy problem. From what I have been reading online,I have seen quite a few posts advising against wubi ubuntu installation, and generally to the effect that 'do a clean install' I found that the person on this thread has faced an identical issue, but he had to do a re-install http://ubuntuforums.org/archive/index.php/t-1051277.html Can I make my ubuntu box work right, as it was before? :-)

  Read the article

< Previous Page | 304 305 306 307 308 309 310 311 312 313 314 315  | Next Page >