Search Results

Search found 28388 results on 1136 pages for 'install metro apps'.

Page 327/1136 | < Previous Page | 323 324 325 326 327 328 329 330 331 332 333 334  | Next Page >

  • Audio comes out of both headphone and speaker at the same time.. Ubuntu 12.04LTS [closed]

    - by pst007x
    I have the same issue on an Aspire. Ubuntu 12.04LTS 64bit realtek audio sound chip onboard If I plug in a headset, audio does not switch from internal speaker to headset, instead plays out of both at the same time. I have looked at the alsamixer setting, all on. I installed gnome-alsamixer, and I noticed headphone was ticked, if I untick the main audio mutes, and the headphone no longer works. Headset only works with internal speaker. Audio works fine on my other desktop and laptop running this release 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) salvatore@salvatore-Aspire-7730:~$ cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.24. salvatore@salvatore-Aspire-7730:~$ head -n 1 /proc/asound/card*/codec#* ==> /proc/asound/card0/codec#0 <== Codec: Realtek ALC888 ==> /proc/asound/card0/codec#1 <== Codec: LSI ID 1040 ==> /proc/asound/card0/codec#2 <== Codec: Intel Cantiga HDMI salvatore@salvatore-Aspire-7730:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC888 Analog [ALC888 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC888 Digital [ALC888 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 salvatore@salvatore-Aspire-7730:~$ uname -a Linux salvatore-Aspire-7730 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux salvatore@salvatore-Aspire-7730:~$ The alsa-base.conf does not exist Tried this: sudo apt-get remove --purge alsa-base sudo apt-get remove --purge pulseaudio sudo apt-get install alsa-base sudo apt-get install pulseaudio sudo alsa force-reload Then: sudo apt-get purge pulseaudio gstreamer0.10-pulseaudio sudo apt-get install pulseaudio gstreamer0.10-pulseaudio indicator-sound Tred this. sudo gedit Then open terminal: sudo /etc/modprobe.d/alsa-base.conf At the end of the file add a new line: options snd-hda-intel model=generic Save and then reboot But alsa-base.conf does not exist

    Read the article

  • Does it make sense to use jQuery in modern-webkit-only web applications?

    - by futlib
    I'm lately working on a few mobile web apps for Android (2.3+) and iOS (4+). Their browsers support most of ECMAScript5, which is very powerful, and I wanted to use language features where possible, resorting to jQuery only when I had to. Turns out the only thing I use jQuery for is to have a shorter alternative for document.querySelectorAll. Might as well get rid of it. If I only have to support modern WebKit browsers, is it a good idea to get rid of jQuery (and other general-purpose libraries)? They are a layer of indirection, after all. (The apps don't have to make AJAX calls so far, I guess that's one thing that's going to get ugly. But is it worth keeping jQuery just for that?)

    Read the article

  • Ubuntu black screen after Installation of 12.10 Live USB

    - by Lime0fHint
    My computer was made in 2004, but I'm sure it doesn't matter since it's a durable machine. So recently, I decided to breathe new life to it with Linux. I tried Lubuntu 12.10, Nope. Black screen after install. So I tried Ubuntu 12.10 when I gave up, and same exact thing. Except, this time I'm fighting for it, since Ubuntu is the best OS I've ever seen. So back on-topic, when I start the installation, it says that something is already mounted (Sda or something of the sorts) So I just figure that it's the Live USB I'm using. So I let it ignore it, and move on. The rest of the installation goes smooth, all looks fine. Then I get to the screen with the introductory to Ubuntu. Meanwhile, it's still installing, but finishing up. I'm not sure if the install actually finishes, but I do know that after a bit, the screen goes back to the desktop. The install closes and I'm back at the desktop, and the cursor is showing the "loading" symbol, as if it were still working. Then the screen goes black, with the same cursor. After that, nothing. I left it over night like that thinking it was doing something, in the morning it was still black with the cursor circling or whatever. So what could be causing this? One concern I have is that I have a Nvidia graphics card (7300 GT). I heard that Nvidia isn't compatible with Linux? I did notice that it was marked as unreconigsed by Ubuntu, so is that the problem perhaps?

    Read the article

  • Package manager doesn't work anymore

    - by LukaD
    I'm using ubuntu 10.10 and recently my package manager has stopped working because of some problems with dependencies or something. I can't upgrade, install or uninstall anything at all. This is a huge problem. I couldn't find a solution to this with google so I'm asking here for help. This is what apt-get -f install outputs LANG=en_US.UTF-8 sudo apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done The following package was automatically installed and is no longer required: firefox-4.0-core Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. After this operation, 0B of additional disk space will be used. Setting up openjdk-6-jre-headless (6b20-1.9.5-0ubuntu1) ... update-alternatives: error: alternative path /usr/lib/jvm/java-6-openjdk/jre/bin/java doesn't exist. dpkg: error processing openjdk-6-jre-headless (--configure): subprocess installed post-installation script returned error exit status 2 Errors were encountered while processing: openjdk-6-jre-headless E: Sub-process /usr/bin/dpkg returned an error code (1)

    Read the article

  • Sometimes new windows don't come to the front when launched

    - by grafthez
    I'm using gnome shell with new ubuntu for few days now and have experienced really annoying behaviour with new windows. Sometimes when I use another window and press e.g. Alt Ctrl T to open new terminal window, I don't get this window being brought to front. Instead I get notification at the bottom that "New terminal window is ready to use". The same is with Pidgin being integrated with gnome shell (via extension). Every time I get new message, window pops up but doesn't show. I need to either Alt Tab it or click the notification. Is there any way to have new windows being always brought to front, and remove those annoying "Window is ready" notifications? UPDATE - gconftool-2 --search-key focus_new_windows (as severin asked): /schemas/apps/metacity/general/focus_new_windows = Schema (type: `string' list_type: '*invalid*' car_type: '*invalid*' cdr_type: '*invalid*' locale: `C') /apps/metacity/general/focus_new_windows = smart

    Read the article

  • Ubuntu server is dropping SSH connections, then not allowing me to log back on

    - by wilhil
    I have an ESX box which I have loaded with two Ubuntu Server machines. During setup, I chose no additional packages to install as I just wanted a lightweight machine for testing. The first thing I did was change the root password via sudo passwd After ESX got on my nerves through lag, I decided to install OpenSSH via apt-get install openssh-server. It did it's business, and I then opened putty and could connect in to both machines fine. The first time it connected, it asked me to add the ssh key as obviously it did not know it. Anyway, the second server is working flawlessly, but, the first seems to be giving me trouble. I was in the middle of typing a sentence when it kicked me off for no reason and when I tried to reconnect, putty gave me a warning that the ssh key had changed and it is potentially dangerous. I attempted to log in anyway and it did not work, just the standard access denied message. Using the second machine, I SSHed in to the first machine and it worked straight away, I then killed the SSH sessions (and possibly SSH server), I then reconnected via putty and I again received the security warning message, but, it allowed me to log on fine. ... I thought "glitch" and nothing more of it, but, it just happened again! I really do not understand this and was hoping someone here can help?

    Read the article

  • Why don't we use browser detection and platform-specific CSS?

    - by Pankaj Upadhyay
    Nowadays, the common phenomena is to develop a website for a browser and then corresponding apps for Android phones, iPhone, tablets and so on. Since all the platforms come with a browser, why aren't companies using CSS to accommodate them? Surely we can detect from the request which browser was used and from which platform the request came. Reading those values, why don't we just implement the corresponding CSS for different platforms. Like we do for IE, Chrome and Safari. This way we can use the platforms' browser capabilities and don't need to develop subsequent apps for a platform.

    Read the article

  • Run ClickOnce Application from CLI

    - by Badger
    I am working on an auto-install script for where I work and we have a ClickOnce type application we use from a vendor. I have looked into it and we can't automate the install but we would like to be able to at least start the install automatically. I have tried rundll32.exe dfshim.dll,ShOpenVerbApplication "%SOFTWARE%\ToolsApp.application" but it gives me an error about an invalid URI. What would probably be the easiest is to use whatever program Windows has (Windows XP in our case) to run the default "handler" for the file. I don't know if any such thing exists, but that is what comes to mind.

    Read the article

  • Should a new programmer nowadays start with C/C++ or OOP language? [closed]

    - by deviDave
    I've been a programmer for 15+ years. In my time, we all started with C or C++ and then moved to C# or Java. At that time it was a usual practice. Now, my brother wants to follow my steps and I am not sure what advice to give him. So, I am asking the community for an opinion. Should nowadays new programmer with zero programming knowledge start with functional languages (C, C++, etc.) or he should start directly with OOP languages (Java, C#, etc.)? The reply should be considered in the context of my brother's future assignments. He will mainly work on Java mobile applications as well as ASP.NET web apps. He will have to touch with desktop apps, low level programming, drivers, etc. This is the reason I am not sure if he should ever need to learn functional languages.

    Read the article

  • PackageForTheWeb "should not be executed directly"

    - by Sergei Ousynin
    When trying to install package (specifically, chipset drivers for Nexcom PEAK-series computer, but I guess it doesn't really matters) I get "PackageForTheWeb Error" saing "This program is used internally by PackageFromTheWeb. It should not be executed directly." I get this error on both Windows 2000 (where it should be installed) and Windows 7. The original driver CD was lost long time ago, so the package was downloaded from the Nexcom website, found no info about installer prerequisites there. What should I install (or anything else) to install this package? UPD: I found a solution - unpacked the package and executed setup.exe that was inside. But I'm pretty sure it's not an action supposed by vendor, so answers are still welcome.

    Read the article

  • Is there a NVIDIA driver (for a 7-series card) that will actually work for 12.10?

    - by DS13
    I see many similar topics on this, but I've tried all their suggestions, and nothing has worked. ISSUE: I do a clean install of Ubuntu 12.10. Boots fine with the “nouveau” graphics driver – graphics are very slow and choppy. The three other driver options in Ubuntu (official NVIDIA drivers), all result in a variation of the black screen on boot up. There will be NO access to a command line/GUI in anyway what-so-ever (tried every option recommended out there, but the system is unusable at this stage). I can only reinstall, and try different drivers…and I only ever get one shot at it. QUESTIONS: Does anyone know of a NVIDIA driver that will actually work with a Nvidia GeForce 7350LE? Or a 7-series card in general? This is my second computer, and I’m just trying to get a working install of Ubuntu on it. I don’t want to put much money into it, as I have seen Ubuntu run great on much older/less capable machines. I’ve got a decent Intel processor (2.3Ghz), 2GB of RAM, 320GB hard drive, 32-bit architecture, and there is no other O/S installed. It appears as if the graphics card is holding me back. Should I just buy a cheap graphics card (non-NVIDIA) to put in as a replacement? TRIED SO FAR: -all drivers available in Ubuntu *all fail -manual install of some different NVIDIA drivers *all fail -also tried installing the generic kernel, Nvidia driver doesn't work in 12.10 *no difference -every method suggested to at least get a command line after switching to a NVIDIA driver *all fail

    Read the article

  • Problems after installing a plethora of updates

    - by box
    yesterday I decided to install 32-bit Ubuntu on my 64-bit desktop, first of all, is that a problem? After installing, i had around 270 updates to install, according to the update manager. I was having trouble launching a game with WINE, so I thought updating might help. After updating, I restarted my computer, and after a long while it showed me my desktop and the icon's on it, but I didn't get anything else. I didn't have the "taskbar" (not sure what it's called, sue me) on the left side, nor the bar at the top. I also received an error message saying some program had stopped working. I decided to restart my computer again, and that was when it told me that i have to re-configure my drivers, or run in "Low Graphics" mode for one session, amongst other options. Well, I decided to try to revert to the "basic video drivers", which was an option it gave. Restarting the computer gave me the same problem as in the second paragraph. After a few more restarts and a night of restless sleep, here I am trying to start my computer again, only to receive a black screen, and my monitor "going to sleep". I'm sort of stumped here, being new to Ubuntu (desktop, at least) and I really hope this gets fixed without me having to install Ubuntu on yet another partition (I have three other partitions for various things already) tl;dr: Black screen on boot after installing updates.

    Read the article

  • Stop Windows 7 from installing critical updates

    - by Rico
    I have disabled Windows Update on Windows 7, but it still downloads and installs critical updates. As with Windows XP, these updates occasionally create problems. But in XP, once I disabled automatic updates, the OS did not override my settings and continue to download and install critical updates. After the most recent critical update to Windows 7, every time I boot up, the USB devices connected to a single port through 4-way hub don't install. I have to unplug the hub from the computer then plug it back in. Then the devices install. I can use System Recovery to solve the immediate problem, but I'd like to disable automatic updates entirely. Why does Windows 7 not respect my settings like Windows XP did?

    Read the article

  • Office 365 : première mise à jour majeure, la suite Cloud de Microsoft s'enrichit d'une trentaine de fonctionnalités

    Première mise à jour majeure pour Office 365 La suite d'outils de productivité hébergée de Microsoft s'enrichit d'une trentaine de fonctionnalités [IMG]http://ftp-developpez.com/gordon-fowler/Office%20365/Office%20365%20logo%202.jpg[/IMG] Alors que la compétition se fait de plus en plus forte avec Google et ses Google Apps, Microsoft vient d'annoncer la première mise à jour majeure d'Office 365. Pour mémoire, Office 365fonctionne par abonnement mensuel. Le service donne accès à Microsoft Office Professionnel Plus 2010 et à un ensemble complet d'outils en mode hébergé : Office Web Apps (version en ligne et simplifiée de Office 2010), Sharepoint Online 2010 (sites collaboratifs, sit...

    Read the article

  • Apache Issues on Windows Server 2008

    - by dlackey
    I'm looking to reinstall Apache 2.2.25 since I continue to get these errors in the Windows Application log every 2-5 minutes: Faulting application name: httpd.exe, version: 2.2.25.0, time stamp: 0x51dd049c Faulting module name: zlib1.dll, version: 1.2.3.0, time stamp: 0x4790446a Exception code: 0xc0000005 Fault offset: 0x00002bad Faulting process id: 0x38e8 Faulting application start time: 0x01cfbfd70cdfbc4f Faulting application path: C:\Apache2\bin\httpd.exe Faulting module path: C:\Apache2\bin\zlib1.dll Report Id: 745f20de-2bca-11e4-bd5d-002590f28d7e If the new install doesn't work or if there are some "issues", can I simply restore the Apache2 directory from backup and then I'll just be back where I started? I thought about just renaming the current install to something like c:\apache2_old and if something fails, I can delete the new install and rename c:\apace2_old back to c:\apache. What do you all think?

    Read the article

  • Installing raid controller forces reinstall of Windows Server 2008

    - by Tyler
    So, I've tried two different RAID controllers that have external SATA connections on my Server 2008 machine. I can install the hardware, boot into Windows, install the drivers and reboot again. No problems. However, as soon as I try to use eSATA-connected drives and reboot something happens to the Windows install and I can no longer boot into Windows. I tried repairing from the command line, and the end result is that repair console tells me I have 0 Windows installations (?). I end up having no choice but to reinstall Windows to get back on track. I must be doing something fundamentally wrong here, but I don't know what :(

    Read the article

  • Debian 6 or CentOS 6 - which one is easiest for latest versions of Ruby and Postgres?

    - by A4J
    I am getting a new server as I've messed up my current box, while trying to install Postgres 9 (on my CentOS 5.8 box). To cut a long story short, I removed postgres but yum decided to remove virtualmin-base as well, which broke my virtualmin install (postfix/dovcot stopped working). Virtualmin advise a fresh install once virtualmin-base has been removed/reinstalled. So I'll probably make a decision based on this simple criteria: which distro out of the two makes it easiest for installing the latest versions of Ruby and Postgres? They are both equally respected as web servers, so I really don't mind either way - I just want to use the one that will work best with the software I need.

    Read the article

  • How to properly uninstall/reinstall Ubuntu One on Windows XP?

    - by user73303
    I had previously installed an Ubuntu One client as a test on a Windows XP machine. Now I wanted to change the account for the client to a production one but had problems changing the email address so decided to do a reinstall. Ran uninstall. Downloaded ubuntuone-3.0.2-windows-installer.exe. It downloads, goes through the unpacking/install – strangely some of the messages say updating as if it was replacing something that was already there. I do not get the setup/signin screen. There is no ubuntu% processes running. The Program files/ubuntuone directory exists with data and dist folders. The U icon is on the desktop – pointing at ubuntuone/dist/ubuntuone-control-panel-qt.exe but this does not run. Ran uninstall again, deleted Program files/ubuntuone directory, removed any ubuntu entries for registry, rebooted. Downloaded install again - exactly the same as above. How can I uninstall Ubuntu One to get a clean reinstall? Or force the install to continue after downloading/unpacking?

    Read the article

  • How small can/should I make my partitions?

    - by Pureferret
    My machine is currently split into 3 user partitions (plus however many Windows and Linux have decided to slyly create) Which are C: Windows 7, D: Data, and E(?): Ubuntu. I'm considering wiping my Windows 7 Install (stupid Skyrim not installing) and restructuring the way my machine operates. I want the partitions for the Windows and Linux install to be as small as possible while still able to function well, and be able to install games on my Windows C: drive. I then want to link from both Win7 and Linux drives to the middle D drive so that the in built My Documents (and etc on windows) folder and my Home folder (linux) share a common location, rather than my current situation which is 3 separate file locations. Something like this: I have 1 TB to play with and I want to know the 'best' sizes to make these partitions when I reinstall Windows (which I need to do anyway) and re-jig everything.

    Read the article

  • CentOS 5.5 Package documentation

    - by fthinker
    Usually when I install a common package like PostgreSQL or MySQL or Python etc using Yum it installs the files held within those packages into locations specific to CentOS itself. It may also install scripts specific to CentOS only. These paths may not be the same as the defaults found within the source distributions found on the PostgreSQL, MySQL, Python etc project websites and the scripts are usually unique to CentOS. Recently when I installed PostgreSQL under Ubuntu I found some very nice distribution specific information about how the install was organized and how to use the package in a Ubuntu way. I found this information in /usr/share/doc/ Is there any such information included within CentOS?

    Read the article

  • Installing DB2 in Windows 2003 Cluster

    - by radoslawc
    How can I install db2 with already created domain user? Or maybe there is no need, just install with local user db2admin and then create instance using existing domain user? This is how it looks I've got win 2003 cluster single quorum, I have to move db2 database to another cluster in same domain. I've added resources to new cluster like in IBM redbook, and I have problem adding db2 resource. I've got service account DOMAIN\serviceaccount and DOMAIN\db2_instance owner, to install db2 do I have to log in as db2_instance_owner? Thanks in advance

    Read the article

  • Crossplatform "jail" for an application

    - by Alexander
    We currently have a variety of systems (Linux, Solarix, *BSD, HP-UX ...) on which we are not allowed to install anything into / (but I have root access. That's strange, I know). But we'd like to run Puppet on all of them. So, the obvious idea is to install Puppet with all prebuilt dependencies into some isolated tree, something like "jail", which will allow to use dependences from some prefix and to access the host system. The big advatanges would be uniform deployment and updates. One solution that came to my mind is to deploy Gentoo Prefix, and install Puppet there with package manager. However, this requires a lot of extra space and some manual patching for each system. Maybe there are some more elegant and simple solutions?

    Read the article

  • Partition tool with console UI (as in server installation)?

    - by lepe
    Back in 2006, Ray (3DLover) posted the same question in: http://ubuntuforums.org/showthread.php?t=309680 but none of the answers were really useful. Now with a little help from AskUbuntu community, I would like to repeat his question again to see if this time it can be answered correctly. So this is the question (and what I wish too): I'm looking for a UI tool for managing partitions in a console. I have installed Ubuntu Server, so I don't have X Windows at all. fdisk and sfdisk are entirely command line. parted is slightly better, but it's not really a UI. cfdisk has somewhat of a UI, but it only works on one disk at a time, and there's no advanced options like configuring LVM or RAID. Just partitioning. I love the partition tool that is available during the OS install procedure. You can partition, configure RAID's and LMV sets. It can format the partitions with several different file systems, it can set labels, mount options and it can insert your volumes into your fstab. Is this tool available as a stand-alone program? I can't find it anywhere. I think it's called parted_server, but I can't find much information about where to get it. In the past, I have run the Ubuntu install procedure just to use the partition manager that comes with it. (canceling the install after making my partition edits) Anyone help me on this? Thanks -Ray Thanks in advance.

    Read the article

< Previous Page | 323 324 325 326 327 328 329 330 331 332 333 334  | Next Page >