Search Results

Search found 26004 results on 1041 pages for 'debian based'.

Page 345/1041 | < Previous Page | 341 342 343 344 345 346 347 348 349 350 351 352  | Next Page >

• Installing VMware ESXi 4.0 on Dell 1950: Cannot open vmkboot.gz

  - by rlandster

  I am trying to install VMware ESXi 4.0.0 U1 on a Dell 1950 server via a bootable CD-ROM. I keep getting this error right at the start: Cannot open vmkboot.gz I checked that the CD-ROM drive is not to blame by installing Debian Etch using that drive. I tried several different versions of ESXi (3.5, 3.5 Dell edition, 4.0 Dell edition) and they all give me an error at the same place. I also tried installing from a USB "thumb" drive but got the same error. I checked with the VMware HCL (Hardware Compatibility List) and the Dell 1950 is listed as being compatible. Here are some server details: Two 1.6 GHz Xeon 5110 CPUs (ID: 06-0F-B) BIOS version 2.2.6 Any ideas on what might be the issue?

  Read the article

• grub crc error after decompressing linux

  - by w00t

  Hi, I have a debian with a raid1 on it. Both HDDs have bootable flags and grub setup in MBR. If I only start up with sda, linux boots. If I only start up with sdb, grub shows up and says Decompressing Linux... crc error -- System halted I have reinstalled grub a few times now but still nothing. It goes like this: /dev/md0 contains /dev/sda1 /dev/sdb1 find /boot/grub/stage1 shows (hd0,1) (hd0,1) The line that boots Linux shows: root (hd0,0) kernel /vmlinuz-2.6.26-1-686 initrd /initrd.img-2.6.26-1-686 This kind of renders my "redundant" array useless. Any clues? update: just to mention, these are 2 different HDDs, sda is 320gb and sdb is 400gb. Both are WD and both have exactly the same partitions, cloned using sfdisk.

  Read the article

• Reboot VPS by reaching memory limit

  - by Ali

  When a server uses memory more than available RAM, the system will shut down the virtual machine. Then, it is only possible to boot from outside (VPS control panel, e.g. vePortal or SolusVM). However, it should be possible to plan a reboot before possible shut down. What is the best practical method to check the used memory, and reboot the system upon reaching e.g. 90% of the allowed RAM? Is there a common program or script to do so? I am using Debian/Ubuntu.

  Read the article

• Libraries merged folder views

  - by Stigma

  So I pretty much love the Windows 7 Libraries feature, and saw one use for them that I thought would be perfect, but I can't seem to manage it. Basically, a merged view of different folder structures. Suppose I make a new generic library and add three locations to it: C:\Test\, D:\Test\ and D:\temp\Test\. Now, these may look somewhat okay as long as there are no duplicates in these folders. (It wants to group them based on the included directory, which one can work around by looking on google - I don't have the precise trick on hand I am afraid.) But when you get collisions and, say, two of those directories have a Sub directory in them, stuff becomes unusable (assuming Arrange by: Folder view). You'll have multiple folders listed named Sub, which is pretty useless when looking for data. I want folders to get 'merged', which ought to be possible somehow since it can create these merged views based on artist, album etc in other views. So all subdirectories that are double (and recursively checking for doubles inside those, etc) ought to be merged for as far the View is concerned. If files have a collision, I don't really care what happens - hide one, show both, filter out duplicates, whatever. (Although an option would be nice...) Anyhow, is there anyone who knows how to get such a 'merged folder structure' functionality for Libraries? It would be really useful for me.

  Read the article

• setting nproc in /etc/security/limit.conf prevents ssh login

  - by omry

  I am trying to use /etc/security/limit.conf on Linux (Debian) to limit the number of processes per user. for starters, I tried to limit my own user processes by adding this to /etc/security/limit.conf: omry hard nproc 100 this locked my user out of ssh. I could open new processes (verified with su omry), but could not log into ssh with that user : sshd reported this in it's log: fatal: setreuid 1000: Resource temporarily unavailable also, I am certain my user is not running anything near 100 processes (actually 6). what can be the reason for this?

  Read the article

• Why use FQDN as DNS-server option in DHCP?

  - by Filip Haglund

  I've seen multiple default configurations of DHCP-servers with a FQDN set as the DNS-server option. Doesn't this imply a catch-22, or the need for that DNS-server to be in the hosts file of every single client? example from dhcp3-server in debian 6: option domain-name-servers ns1.internal.example.org; I can see how using a dns name is convenient because it's only an A-record to change, and they can be load balanced if wanted, but I don't see how the client is going to resolve the name. Why are people using FQDN's as DNS-server addresses in DHCP?

  Read the article

• Best suited multi-function printer for Linux usage from a few choices

  - by Nakedible

  I want a cheap multi-function printer for Linux usage. I'm looking for rock solid scanning and printing that works with big images. I'd prefer drivers that are available in Debian, or other drivers that are open source, but will settle for proprietary drivers if they are well contained and clean. Some choices I have are: Samsung SCX-4300 HP LaserJet M1120 MFP Samsung SCX-4500 Canon i-SENSYS MF4010 Brother DCP-7040 I am also interested in opinions what printer communication language is best for Linux usage for cheap printers. PostScript is nice, of course, but low-end PostScript printers often have problems when printing complex (large) PostScript files. It seems Samsung printers use SPL for communication, HP uses XQX and ZJS, then there's ofcourse PCL.

  Read the article

• Why are my files in /var/lock and where did they just go?!

  - by Nicky Hajal

  I am hosting a website on Debian 5.0 & Apache2. Today one of my websites was down, Apache said it couldn't find the directory. I located the files and the whole site once in /var/www/site was now /var/lock/site. All the files were present. I was confused, but figured I'd just move it back. mv /var/lock/site /var/www All looked fine... Except that only the directories moved and the files appear to be lost! I am working on restoring from backups but I would really love to know what happened and where my files went (the backups are a few days old). Thanks for your help!

  Read the article

• Problem with gmailfs

  - by user35529

  Hello(????????????) I've got a little with gmailfs. I'm trying to mount gmail accout as a local file system on my Debian Lenny using the following command. mount -t gmailfs none /mnt/gmail -o [email protected],password=mypassword,fsname=SixSixSix But it gives my garbage like this Ignored option :rw Traceback (most recent call last): File "/sbin/mount.gmailfs", line 166, in <module> main(mountpoint, namedOptions, useEncfs) File "/sbin/mount.gmailfs", line 92, in main gmailfs.main(mountpoint, namedOptions) File "/usr/lib/python2.5/site-packages/gmailfs.py", line 1175, in main server = Gmailfs(namedOptions,mountpoint,version="gmailfs 0.8.0",usage='',dash_s_do='setsingle') File "/usr/lib/python2.5/site-packages/gmailfs.py", line 611, in __init__ self.ga.login() File "/usr/lib/python2.5/site-packages/libgmail.py", line 316, in login raise GmailLoginFailure("Login failed. (Wrong username/password?)") libgmail.GmailLoginFailure: 'Login failed. (Wrong username/password?)' Username and Password are totally correct.

  Read the article

• Download acceleration with jigdo?

  - by james

  Im using jigdo-lite to download a Debian DVD ISO. I already have the CD version of the image, so I added the CD files to the task. Now I need to download many files (not all) of the DVD ISO. The default jigdo-lite uses wget to download files. It seems jigdo (wget) downloads only one file at a time with one connection. So I'm getting a low download speed. How can I accelerate the download speed using jigdo? Possible Solutions: Using different download manager with jigdo. Is it possible? If yes, How? Using jigdo (wget) to download multiple files at once. How? Getting download links of remaining files to download so that they can be downloaded with a download manager and later added to jigdo iso. How?

  Read the article

• How to force laptop mode on/off

  - by Vi

  root@vi-notebook:/home/vi# laptop_mode start force Laptop mode enabled, not active How to start laptop mode? It starts successfully when AC adapter is removed, but not by explicit command. The system is GNU/Linux Debian i386 squeeze (not up to date), 2.6.30-zen2-31270-gc7099db-dirty, Acer Extensa 5220. Update: Changed to ENABLE_LAPTOP_MODE_ON_AC=1 in /etc/laptop_mode/laptop-mode.conf, now it is turned on always. But I can't turn it off with laptop_mode stop force, it stays turned on anyway. How do I turn it off again?

  Read the article

• Raspberry Pi stuck at splash screen

  - by Matthew

  I have a raspberry pi and I am stuck at the splash screen. In the top right of the screen there is an image of a Raspberry. When I first power on the device, I get the colored screen, and then I get the image of the raspberry followed by a white cursor which quickly freezes or disappears. I put on the debian version of wheezy that allows java. (the soft float version) Any assistance would be greatly appreciated. BTW I did have it working at one point in time and all I did was go to the terminal (logged out of the GUI) and did a shutdown -h now command. But since then I've even started with a brand new version of the image and it is still not working. Oh and I did try the same SD card with a version of arch linux and it worked fine.

  Read the article

• Set Users as chrooted for sftp, but allow user to login in SSH

  - by Eghes

  I have setup a ssh server on debian 7, to use sftp connection. I chrooted some user, with this config: Match Group sftpusers ChrootDirectory /sftp/%u ForceCommand internal-sftp But if i want login with one of this chrooted users in ssh console, they get logged, but autoclose the connection. In logs I see: Oct 17 13:39:32 xxxxxx sshd[31100]: Accepted password for yyyyyy from zzz.zzz.zzz.zzz port 7855 ssh2 Oct 17 13:39:32 xxxxxx[31100]: pam_unix(sshd:session): session opened for user yyyyyyyyyyyy by (uid=0) Oct 17 13:39:32 d00hyr-ea1 sshd[31100]: pam_unix(sshd:session): session closed for user yyyyyyyyyyyy How can I chroot a user only for sftp, and use it as a normal user for ssh?

  Read the article

• Apache stops responding to http requests -- https continues to work

  - by Apropos

  Okay. Very strange problem that I'm having here. I just recently updated to Apache 2.4.2 from 2.2.17, mostly to try to get name-based SSL VirtualHosts working (although they should have been working on 2.2.17). Server is Win2008 R2 (so x64 by definition) running with PHP 5.4.3 and MySQL 5.1.40 (outdated, I know). When I launch the server, it initially works fine. Responds to all requests, VirtualHosts all in order. However, after an uncertain amount of time (appears to only take a few minutes for the most part, but sometimes takes hours), it stops responding to regular HTTP requests (on any VirtualHost). HTTPS continues to work. No errors in the log, and nothing in the access logs when I attempt to connect. I'm having a hard time finding the source of this error given its intermittent nature. When removing all SSL-based VirtualHosts, it seemingly increased stability (still responding to HTTP requests twelve hours later). This could be mere coincidence, though. Entirety of SSL VirtualHost is as follows, should there happen to be a problem with it. <VirtualHost *:443> DocumentRoot "C:\Server\www\virtualhosts\mysite.net" ErrorLog logs/ssl.mysite.net-error_log CustomLog logs/ssl.mysite.net-access_log common env=!dontlog SSLEngine on SSLProtocol all -SSLv2 SSLCipherSuite ALL:!ADH:!EXPORT:!SSLv2:RC4+RSA:+HIGH:+MEDIUM SSLCertificateFile C:/Server/bin/apache/apache2.4.2/conf/ssl/server.crt SSLCertificateKeyFile C:/Server/bin/apache/apache2.4.2/conf/ssl/server.key SSLCertificateChainFile C:/Server/bin/apache/Apache2.4.2/conf/ssl/sub.class1.server.ca.pem SSLCACertificateFile C:/Server/bin/apache/Apache2.4.2/conf/ssl/ca.pem </VirtualHost> Any ideas what I'm missing?

  Read the article

• PuTTY/SSH: How to Prevent Auto-Logout?

  - by feklee

  My ISP's SSH server (Debian 2.0) logs me out after 35 minutes of inactivity, when connected with PuTTY (Windows XP). This is a big problem when I utilize the server for port-forwarding. The final messages displayed in the terminal: This terminal has been idle 30 minutes. If it remains idle for 5 more minutes it will be logged out by the system. Logged out by the system. PuTTY options that do not help: Sending of null packets to keep session active. Seconds between keepalives (0 to turn off): 30 [x] Enable TCP keepalives (SO_KEEPALIVE option) Any idea how to avoid the auto-log-out? Should I try another SSH client?

  Read the article

• Send one invalid email response to sender

  - by Kafuka

  I discovered that my postfix/dovecot configuration isn't rejecting emails. If a person sends an email to an invalid email-address, it just drops it. I am fine with this behavior since I think it discourages spammers from mining emails (I have had some success). Recently a person I did not want to talk to emailed an address I cut off and didn't receive a response back. It would have saved me some problems if they knew to call me instead of sending 50+ emails. How would I configure Dovecot/postfix to send a message back to a sender of an email address and then limit this 1 per domain or unique email. Debian Stable Linux 3.6.5-linode47 Dovecot 1.2.15 Postfix 2.7.1 PSQL - backend if that matters

  Read the article

• Postfix - How to configure to send these emails?

  - by Jon

  I want my mailserver to send mail from my local application "from" any user supplied email address "to" my own address, say "[email protected]". The MX records for "mysite.com" actually point to a different server, even though the outgoing mainserver is running with mydomain set as "mysite.com". Perhaps this is part of the problem? postfix is currently causing a SMTPRecipientsRefused error within the python application. Can anyone point me to what to change in the configuration? Thanks postconf -n: alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no config_directory = /etc/postfix inet_interfaces = all mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 mydestination = mysite.com, localhost.com, , localhost, * myhostname = mysite.com mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 myorigin = /etc/mailname readme_directory = no recipient_delimiter = + relayhost = smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes

  Read the article

• Can't find netbooted for Kerrighed pxe boot with Ubuntu Lucid Server

  - by Pengin

  I'm following installation guides for pxe booting and kerrighed. I can't find the package nfsbooted for Ubuntu 10.04. Where did it go? Context: At work I have access to 8 mini-ITX PCs and am trying to build a cluster. My plans include trying Condor, GridGain, Hadoop, and recently Kerrighed has caught my eye. (I reaslise these are all for different kinds of things, I'm just evaluating). Ideally, I'd like to have all the nodes network boot from a single server, since that seems so much easier to manage, plus I can 'borrow' additional PCs for a while without touching their HD. I've been getting on great with Ubuntu Lucid Server (10.04), trying to follow the only guides I can find to get pxe booting (and ultimately kerrighed) to work. This guide is for Ubuntu 8.04 and this one is for Debian. They both refer to a package I can't seem to find, nfsbooted. Has this package been replaced? Am I doing something daft?

  Read the article

• NIC bonding with two uplinks

  - by Karolis T.

  Is bonding the preferred way of implementing ISP redundancy? In the texts I've seen, bond device has a netmask, gateway of it's own. How can this be obtained if there are two different gateways from two uplinks, which one to choose? Do I need any special routing rules to go with it or does simply configuring separate interfaces (using Debian, /etc/network/interfaces), i.e eth1, eth2 for their corresponding uplinks and bonding them to bond0 handle routing automatically? If I want to NAT client machines, do they use bond device's IP as a gateway? Does the bond0 device is the device that goes into iptables nat rules? Thanks

  Read the article

• Can I take my ReadyNAS drive in Raid1 and plug it straight into new different machine?

  - by jacko

  I would assume that I can just take my HDD out of my NAS (in raid1 mirror) and plug it into another enclosure and have it work off the bat but I'd like to make sure... Any ideas? Edit: My current setup is a Netgear ReadyNAS in (hardware) raid1. I'm hoping to replace this with a home theatre type PC (possibly running Ubuntu), and would like to migrate my data without having to do a bulk transfer over my network between the 2 machines. Can anyone confirm the case for the Netgear ReadyNAS? Edit: Ok after further reading it seems that the ReadyNAS Duo formats my drive as ext3 in 16k blocks. There are instructions for mounting a drive into a linux box here: Mounting Sparc-based ReadyNAS Drives in x86-based Linux There is also talk about a linux image here: ReadyNAS Data Recovery - VMware recovery tool I'm not sure whether this means they ReadyNAS actually implements software raid under the hood, or what? So it appears like it IS do-able, but do any of you linux guru's know whether this is viable and whether the fact that they are in raid 1 affect matters?

  Read the article

• Ubuntu 12.04 suddenly cannot connect to WPA2/WPA Personal protected connection. Windows 7 can

  - by d4ryl3

  I have a laptop with Windows 7 and Ubuntu 12.04. I have a Cisco E1200 and when I set it up, it created 2 SSIDs. Let's name them: MyConnection (WPA/WPA2 personal), and MyConnection-Guest (no authentication, guest password entered via web browser). I had no problem connecting to MyConnection before, either in Windows 7 and Ubuntu. But now, I can't access MyConnection on Ubuntu. It just says "connecting..." then disconnects after a while. But I'm able to access the internet (on Ubuntu) when I connect to MyConnection-Guest. MAC filtering is off (even if it's on its MAC address is in the white list). Any idea why I'm unable to connect to MyConnection in Ubuntu? Thanks. Update: My Ubuntu installation can connect to ANY WiFi connection (WPA/WEP/no auth), except for MyConnection. Update2: This is what "The not so easy way" returned: Initializing interface 'eth1' conf '/etc/wpa_supplicant.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A' Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf' Reading configuration file '/etc/wpa_supplicant.conf' Priority group 0 id=0 ssid='MyConnection' id=1 ssid='MyConnection' id=2 ssid='MyConnection' id=3 ssid='MyConnection' WEXT: cfg80211-based driver detected SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf capabilities: key_mgmt 0xf enc 0xf flags 0x0 netlink: Operstate: linkmode=1, operstate=5 Own MAC address: xx:xx:xx:xx:xx:xx wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=4 set_tx=0 seq_len=0 key_len=0 ioctl[SIOCSIWENCODEEXT]: Invalid argument Driver did not support SIOCSIWENCODEEXT wpa_driver_wext_set_key: alg=0 key_idx=5 set_tx=0 seq_len=0 key_len=0 ioctl[SIOCSIWENCODEEXT]: Invalid argument Driver did not support SIOCSIWENCODEEXT wpa_driver_wext_set_countermeasures RSN: flushing PMKID list in the driver Setting scan request: 0 sec 100000 usec WPS: UUID based on MAC address - hexdump(len=16): 16 3b d8 47 9e 24 50 89 96 16 6d 66 35 f3 58 37 EAPOL: SUPP_PAE entering state DISCONNECTED EAPOL: Supplicant port status: Unauthorized EAPOL: KEY_RX entering state NO_KEY_RECEIVE EAPOL: SUPP_BE entering state INITIALIZE EAP: EAP entering state DISABLED EAPOL: Supplicant port status: Unauthorized EAPOL: Supplicant port status: Unauthorized Added interface eth1

  Read the article

• Fixed Resource Monitor Graph Scale in Windows Server 2008 R2

  - by Clever Human

  In Windows Server 2008 R2's Resource Monitor, is there a way to set the scale of the various graphs to be constant values instead of variable based on data? It seems to me that the utility of a graph is to get a quick overview glance at the values those graphs are showing. So if I look at the CPU graph and the line is up near the top, I can know immediately that something is using all my CPU and go investigate what. I don't really care if the CPU is jumping between .01% and 2%. Or if the network usage monitor is up near the top, I will know that all my bandwidth is being used up, and go figure out what. But the way things are now, the graphs are meaningless because the scales constantly shift. If you look at the network usage graph in one second it might have a scale out of 100kbps, and the next second have a scale based on 1mbps! So... is there a registry key or something that will peg the scale of these graphs to logical maximums?

  Read the article

• Is this a solution for having multiple SSL certificates on the same IP

  - by Saif Bechan

  I am running CentOS running on a VPS. I read some guides on having multiple SSL certificates on the same system, but I can not get the basics to work. The guide I got that makes the most sense to me is the doing the following. In CentOS I can make virtual NIC's. So I made 2 virtual NIC's to start with. 192.168.10.1, 192.168.10.2. Now I work in ISP manager Pro, so this is listening on my primary ip 1.1.1.1 For each website I have them listening on 192.168.10.1:80, 192.168.10.1:443 In the hosts file I made the following 2 entries 192.168.10.1 1st.com 192.168.10.2 2nd.com Now the strange thing is that when I browser to 1st.com I do not get the website located at 192.168.10.1, I get the website located at my prim IP 1.1.1.1 Should I do something like forwarding or routing for this setup to work? And the basic question: Will this setup even work? Are the SSL certificates based on the IP adress, or are the based on the host name, 1st.com and 2nd.com.

  Read the article

• Exim4: Deny outgoing emails with specific destination domains to being sent to the smarthost

  - by Yoann P

  I try to deny outgoing emails with specific destination domains to being sent to the smarthost but unsuccessfully. I'm on a debian "squeeze" configured to use a smarthost. vi /etc/exim4/conf.d/acl/30_exim4-config_check_rcpt Add right after "acl_check_rcpt:" deny message = Domain $domain is prohibited for outgoing mails domains = lsearch;/etc/exim4/restricted_domains Reload exim, but the mails to the restricted domains continue to go out I also tried to add the acl_not_smtp after reading this post but without success either. vi /etc/exim4/conf.d/main/02_exim4-config_options Add "acl_not_smtp = acl_check_not_smtp" vi /etc/exim4/conf.d/acl/30_exim4-config_check_rcpt And add at the top of the file acl_check_not_smtp: deny message = Domain $domain is prohibited for outgoing mails domains = lsearch;/etc/exim4/restricted_domains Can anybody point me what i'm doing wrong please? Thanks, Best regards,

  Read the article

• IP Blacklists and suspicious inbound and outbound traffic

  - by Pantelis Sopasakis

  I administer a web server and recently we had our IP banned (!) from our host after they received a notification e-mail for abuse. In particular our server is allegedly involved in spam attacks over HTTP. The content of the abuse report email we received was not much informative - for example the IP addresses our server is supposed to have attacked against are not included - so I started a wireshark session checking for suspicious traffic over TCP/HTTP while trying to locate possible security holes on the system. (Let me note that the machine runs a Debian OS). Here is an example of such a request... Source: 89.74.188.233 Destination: 12.34.56.78 // my ip Protocol: HTTP Info: GET 'http://www.media.apniworld.com/image.php?type=hv' HTTP/1.0 I manually blacklisted this host (as well as some other ones) blocking them with iptables, but I can't keep on doing manually all day long... I'm looking for an automated way to block such IPs based on: Statistical analysis, pattern recognition or other AI-based analysis (Though, I'm reluctant to trust such a solution, if exists) Public blacklists Using DNSBL I actually found out that 89.74.188.233 is blacklisted. However other IPs which are strongly suspicious like 93.199.112.126 (i.e. http://www.pornstarnetwork.com/account/signin), unfortunately were not blacklisted! What I would like to do is to automatically connect my firewall with DNSBL (or some other blacklist database) and block all traffic towards blacklisted IPs or somehow have my local blacklist automatically updated.

  Read the article

< Previous Page | 341 342 343 344 345 346 347 348 349 350 351 352  | Next Page >