Search Results

Search found 23949 results on 958 pages for 'program crashes'.

Page 357/958 | < Previous Page | 353 354 355 356 357 358 359 360 361 362 363 364  | Next Page >

• OutOfMemoryException Processing Large File

  - by Krip

  We are loading a large flat file into BizTalk Server 2006 (Original release, not R2) - about 125 MB. We run a map against it and then take each row and make a call out to a stored procedure. We receive the OutOfMemoryException during orchestration processing, the Windows Service restarts, uses full 2 GB memory, and crashes again. The server is 32-bit and set to use the /3GB switch. Also I've separated the flow into 3 hosts - one for receive, the other for orchestration, and the third for sends. Anyone have any suggestions for getting this file to process wihout error? Thanks, Krip

  Read the article

• use of assertions for type checking in php?

  - by user151841

  I do some checking of arguments in my classes in php using exception-throwing functions. I have functions that do a basic check ( ===, in_array etc ) and throw an exception on false. So I can do assertNumeric($argument, "\$argument is not numeric."); instead of if ( ! is_numeric($argument) ) { throw new Exception("\$argument is not numeric."); } Saves some typing I was reading in the comments of the php manual page on assert() that As noted on Wikipedia - "assertions are primarily a development tool, they are often disabled when a program is released to the public." and "Assertions should be used to document logically impossible situations and discover programming errors— if the 'impossible' occurs, then something fundamental is clearly wrong. This is distinct from error handling: most error conditions are possible, although some may be extremely unlikely to occur in practice. Using assertions as a general-purpose error handling mechanism is usually unwise: assertions do not allow for graceful recovery from errors, and an assertion failure will often halt the program's execution abruptly. Assertions also do not display a user-friendly error message." This means that the advice given by "gk at proliberty dot com" to force assertions to be enabled, even when they have been disabled manually, goes against best practices of only using them as a development tool So, am I 'doing it wrong'? What other/better ways of doing this are there?

  Read the article

• UIWebView memory management

  - by wolfrevo

  Hello, I have a problem with memory management. I am developing an application that makes heavy use of UIWebView. This app generates dynamically lots of UIWebViews while loading content from my server. Some of these UIWebViews are quite large and have a lot of pictures. If I use instruments to detect leaks, I do not detect any. However, lots of objects are allocated and I suspect that has to do with the UIWebViews. When the webviews release because no longer needed, it appears that not all memory is released. I mean, after a request to my server the app creates an UITableView and many webviews (instruments say about 8Mb). When user tap back, all of them are released but memory usage only decrements about 2-3 Mb, and after 5-10 minutes using the app it crashes. Am I missing something? Anyone know what could be happening? Thank you!

  Read the article

• Embedding Perl Interpreter

  - by cam

  Hi, just downloaded ActivePerl. I want to embed the perl interpreter in a C# application (or at least call the perl interpreter from C#). I need to be able to send send out data to Perl from C#, then receive the output back into C#. I just installed ActivePerl, and added MS Script Control 1.0 as a reference. I found this code on the internet, but am having trouble getting it to work. MSScriptControl.ScriptControlClass Interpreter = new MSScriptControl.ScriptControlClass(); Interpreter.Language = @"ActivePerl"; string Program = @"reverse 'abcde'"; string Results = (string)Interpreter.Eval(Program); return Results; Originally, it had 'PerlScript' instead of 'ActivePerl', but neither work for me. I'm not entirely sure what Interpreter.Language expects. Does it require the path to the interpreter? Solved... I'm not sure how, but when I changed it back to PerlScript it works now. Still, I would like to know if MSScript Control is using ActivePerl or another interpreter.

  Read the article

• Trouble with an depreciated constrictor visual basic visual studio 2010

  - by VBPRIML

  My goal is to print labels with barcodes and a date stamp from an entry to a zebra TLP 2844 when the user clicks the ok button/hits enter. i found what i think might be the code for this from zebras site and have been integrating it into my program but part of it is depreciated and i cant quite figure out how to update it. below is what i have so far. The printer is attached via USB and the program will also store the entered numbers in a database but i have that part done. any help would be greatly Appreciated.   Public Class ScanForm      Inherits System.Windows.Forms.Form    Public Const GENERIC_WRITE = &H40000000    Public Const OPEN_EXISTING = 3    Public Const FILE_SHARE_WRITE = &H2      Dim LPTPORT As String    Dim hPort As Integer      Public Declare Function CreateFile Lib "kernel32" Alias "CreateFileA" (ByVal lpFileName As String,                                                                           ByVal dwDesiredAccess As Integer,                                                                           ByVal dwShareMode As Integer, <MarshalAs(UnmanagedType.Struct)> ByRef lpSecurityAttributes As SECURITY_ATTRIBUTES,                                                                           ByVal dwCreationDisposition As Integer, ByVal dwFlagsAndAttributes As Integer,                                                                           ByVal hTemplateFile As Integer) As Integer          Public Declare Function CloseHandle Lib "kernel32" Alias "CloseHandle" (ByVal hObject As Integer) As Integer      Dim retval As Integer           <StructLayout(LayoutKind.Sequential)> Public Structure SECURITY_ATTRIBUTES          Private nLength As Integer        Private lpSecurityDescriptor As Integer        Private bInheritHandle As Integer      End Structure            Private Sub OKButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles OKButton.Click          Dim TrNum        Dim TrDate        Dim SA As SECURITY_ATTRIBUTES        Dim outFile As FileStream, hPortP As IntPtr          LPTPORT = "USB001"        TrNum = Me.ScannedBarcodeText.Text()        TrDate = Now()          hPort = CreateFile(LPTPORT, GENERIC_WRITE, FILE_SHARE_WRITE, SA, OPEN_EXISTING, 0, 0)          hPortP = New IntPtr(hPort) 'convert Integer to IntPtr          outFile = New FileStream(hPortP, FileAccess.Write) 'Create FileStream using Handle        Dim fileWriter As New StreamWriter(outFile)          fileWriter.WriteLine(" ")        fileWriter.WriteLine("N")        fileWriter.Write("A50,50,0,4,1,1,N,")        fileWriter.Write(Chr(34))        fileWriter.Write(TrNum) 'prints the tracking number variable        fileWriter.Write(Chr(34))        fileWriter.Write(Chr(13))        fileWriter.Write(Chr(10))        fileWriter.Write("A50,100,0,4,1,1,N,")        fileWriter.Write(Chr(34))        fileWriter.Write(TrDate) 'prints the date variable        fileWriter.Write(Chr(34))        fileWriter.Write(Chr(13))        fileWriter.Write(Chr(10))        fileWriter.WriteLine("P1")        fileWriter.Flush()        fileWriter.Close()        outFile.Close()        retval = CloseHandle(hPort)          'Add entry to database        Using connection As New SqlClient.SqlConnection("Data Source=MNGD-LABS-APP02;Initial Catalog=ScannedDB;Integrated Security=True;Pooling=False;Encrypt=False"), _        cmd As New SqlClient.SqlCommand("INSERT INTO [ScannedDBTable] (TrackingNumber, Date) VALUES (@TrackingNumber, @Date)", connection)            cmd.Parameters.Add("@TrackingNumber", SqlDbType.VarChar, 50).Value = TrNum            cmd.Parameters.Add("@Date", SqlDbType.DateTime, 8).Value = TrDate            connection.Open()            cmd.ExecuteNonQuery()            connection.Close()        End Using          'Prepare data for next entry        ScannedBarcodeText.Clear()        Me.ScannedBarcodeText.Focus()      End Sub

  Read the article

• How do I set an array in one class with another array in another class

  - by Stef

  I've populated and array with data like this in one class... PowerClass.h NSMutableArray pickerArray; @property (nonatomic, retain) NSMutableArray pickerArray; - PowerClass.m @synthesize pickerArray; @implementation NSMutableArray *array = [[NSArray alloc] initWithObjects:@"stef", @"steve", @"baddamans", @"jonny", nil]; pickerArray = [NSMutableArray arrayWithArray:array]; And I'm trying to set the Array in another class WeekClass.h PowerClass *powerClass; NSMutableArray *pickerData; @property (nonatomic, retain) NSMutableArray pickerData; @property (nonatomic, retain) PowerClass *powerClass; WeekClass.m @implementation pickerData = [NSMutableArray arrayWithArray:powerClass.pickerArray]; I have no errors or warnings. It just crashes. The NSLog says that the powerClass.pickerArray is NULL. Please help point me in the right direction.

  Read the article

• why assign null value or another default value firstly?

  - by Phsika

  i try to generate some codes. i face to face delegates. Everythings is ok.(Look below) But appearing a warning: you shold assing value why? but second code below is ok. namespace Delegates { class Program { static void Main(string[] args) { HesapMak hesapla = new HesapMak(); hesapla.Calculator = new HesapMak.Hesap(hesapla.Sum); double sonuc = hesapla.Calculator(34, 2); Console.WriteLine("Toplama Sonucu:{0}",sonuc.ToString()); Console.ReadKey(); } } class HesapMak { public double Sum(double s1, double s2) { return s1 + s2; } public double Cikarma(double s1, double s2) { return s1 - s2; } public double Multiply(double s1, double s2) { return s1 * s2; } public double Divide(double s1, double s2) { return s1 / s2; } public delegate double Hesap(double s1, double s2); public Hesap Calculator; ----&#60; they want me assingn value } } namespace Delegates { class Program { static void Main(string[] args) { HesapMak hesapla = new HesapMak(); hesapla.Calculator = new HesapMak.Hesap(hesapla.Sum); double sonuc = hesapla.Calculator(34, 2); Console.WriteLine("Toplama Sonucu:{0}",sonuc.ToString()); Console.ReadKey(); } } class HesapMak { public double Sum(double s1, double s2) { return s1 + s2; } public double Cikarma(double s1, double s2) { return s1 - s2; } public double Multiply(double s1, double s2) { return s1 * s2; } public double Divide(double s1, double s2) { return s1 / s2; } public delegate double Hesap(double s1, double s2); public Hesap Calculator=null; } }

  Read the article

• Beginner python - stuck in a loop

  - by Jeremy

  I have two begininer programs, both using the 'while' function, one works correctly, and the other gets me stuck in a loop. The first program is this; num=54 bob = True print('The guess a number Game!') while bob == True: guess = int(input('What is your guess? ')) if guess==num: print('wow! You\'re awesome!') print('but don\'t worry, you still suck') bob = False elif guess>num: print('try a lower number') else: print('close, but too low') print('game over')`` and it gives the predictable output of; The guess a number Game! What is your guess? 12 close, but too low What is your guess? 56 try a lower number What is your guess? 54 wow! You're awesome! but don't worry, you still suck game over However, I also have this program, which doesn't work; #define vars a = int(input('Please insert a number: ')) b = int(input('Please insert a second number: ')) #try a function def func_tim(a,b): bob = True while bob == True: if a == b: print('nice and equal') bob = False elif b > a: print('b is picking on a!') else: print('a is picking on b!') #call a function func_tim(a,b) Which outputs; Please insert a number: 12 Please insert a second number: 14 b is picking on a! b is picking on a! b is picking on a! ...(repeat in a loop).... Can someone please let me know why these programs are different? Thank you!

  Read the article

• Best Practice: QT4 QList<Mything*>... on Heap, or QList<Mything> using reference?

  - by Mike Crowe

  Hi Folks, Learning C++, so be gentle :)... I have been designing my application primarily using heap variables (coming from C), so I've designed structures like this: QList<Criteria*> _Criteria; // ... Criteria *c = new Criteria(....); _Criteria.append(c); All through my program, I'm passing pointers to specific Criteria, or often the list. So, I have a function declared like this: QList<Criteria*> Decision::addCriteria(int row,QString cname,QString ctype); Criteria * Decision::getCriteria(int row,int col) which inserts a Criteria into a list, and returns the list so my GUI can display it. I'm wondering if I should have used references, somehow. Since I'm always wanting that exact Criteria back, should I have done: QList<Criteria> _Criteria; // .... Criteria c(....); _Criteria.append(c); ... QList<Criteria>& Decision::addCriteria(int row,QString cname,QString ctype); Criteria& Decision::getCriteria(int row,int col) (not sure if the latter line is syntactically correct yet, but you get the drift). All these items are specific, quasi-global items that are the core of my program. So, the question is this: I can certainly allocate/free all my memory w/o an issue in the method I'm using now, but is there are more C++ way? Would references have been a better choice (it's not too late to change on my side). TIA Mike

  Read the article

• Is there a programming toolkit for converting "any file type" to a TIFF image?

  - by Ryan

  Hello, I've written several variations of a program. The purpose of the program is to convert "any file type" to a TIFF image represenation of that file, as if it were being printed using a printer. I'm currently using a third party printer driver that I send files to, and it outputs a TIFF image. This is nice, but it requires me to use Office Interop files, and interact with each individual processing application in order to print the files. I had previously tried a toolkit, called Apose .NET, which did not rely on Office Interop, and did not require any printer driver. It did the conversion all on its own and would create a TIFF image. The problem with Aspose .NET was that it did not support a wide variety of input file types. Most notably, it can't do Visio files. My project calls for the ability to create a TIFF image for virtually "any file type". (excluding exes, music files, and stuff) I know that finding something that handles literally any file type is probably not a very feasible task, so I figure if it can at least handle all the Office file types, Adobe types, and other major standard file types, then I can write a custom extension parsing module that uses those processing applications to do the printing of any file type that can be viewed using those applications. So, does anyone know of a toolkit that can do this? Preferably one that does not rely on Office or a printer driver. It does not have to be free, or open source. Or, if you know of an amazing printer driver that does this, I'm open to that too. Thanks in advance, Ryan

  Read the article

• Is it possible to access a Silverlight control via the COM automation model?

  - by dlanod

  What I'm trying to attempt is to access methods on a Silverlight control via the COM automation model. Theoretically it should be possible, as exposing the Silverlight control's methods as scriptable members exposes them through an IDispatch interface. I have been able to access the IDispatch interface through the automation model correctly but when I attempt to call a method on the exposed interface via Invoke it crashes. I was wondering if anyone knew whether this was expected behaviour, i.e. I'm violating some basic sandboxing requirement, or whether this should work and it is just something in my implementation that needs correcting? Cheers.

  Read the article

• Downloading a Directory Tree with FTPLIB

  - by Anthony Lemmer

  I'd like to download a directory and all of its contents to the local HD. Here's the code I have thus far (crashes if there's a sub-directory, else grabs all the files): import ftplib import configparser import os def runBackups(): #Load INI filename = 'connections.ini' config = configparser.SafeConfigParser() config.read(filename) connections = config.sections() i = 0 while i < len(connections): #Load Settings uri = config.get(connections[i], "uri") username = config.get(connections[i], "username") password = config.get(connections[i], "password") backupPath = config.get(connections[i], "backuppath") archiveTo = config.get(connections[i], "archiveto") #Start Back-ups ftp = ftplib.FTP(uri) ftp.login(username, password) ftp.set_debuglevel(2) ftp.cwd(backupPath) files = ftp.nlst() for filename in files: ftp.retrbinary('RETR %s' % filename, open(os.path.join(archiveTo, filename), 'wb').write) ftp.quit() i += 1 print() print("Back-ups complete.") print()

  Read the article

• Getting DirectoryNotFoundException when trying to Connect to Device with CoreCon API

  - by ageektrapped

  I'm trying to use the CoreCon API in Visual Studio 2008 to programmatically launch device emulators. When I call device.Connect(), I inexplicably get a DirectoryNotFoundException. I get it if I try it in PowerShell or in C# Console Application. Here's the code I'm using: static void Main(string[] args) { DatastoreManager dm = new DatastoreManager(1033); Collection<Platform> platforms = dm.GetPlatforms(); foreach (var p in platforms) { Console.WriteLine("{0} {1}", p.Name, p.Id); } Platform platform = platforms[3]; Console.WriteLine("Selected {0}", platform.Name); Device device = platform.GetDevices()[0]; device.Connect(); Console.WriteLine("Device Connected"); SystemInfo info = device.GetSystemInfo(); Console.WriteLine("System OS Version:{0}.{1}.{2}", info.OSMajor, info.OSMinor, info.OSBuildNo); Console.ReadLine(); } My question: Does anyone know why I'm getting this error? I'm running this on WinXP 32-bit, plain jane Visual Studio 2008 Pro. I imagine it's some config issue since I can't do it from a Console app or PowerShell. Here's the stack trace as requested: System.IO.DirectoryNotFoundException was unhandled Message="The system cannot find the path specified.\r\n" Source="Device Connection Manager" StackTrace: at Microsoft.VisualStudio.DeviceConnectivity.Interop.ConManServerClass.ConnectDevice() at Microsoft.SmartDevice.Connectivity.Device.Connect() at ConsoleApplication1.Program.Main(String[] args) in C:\Documents and Settings\Thomas\Local Settings\Application Data\Temporary Projects\ConsoleApplication1\Program.cs:line 23 at System.AppDomain._nExecuteAssembly(Assembly assembly, String[] args) at System.AppDomain.ExecuteAssembly(String assemblyFile, Evidence assemblySecurity, String[] args) at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly() at System.Threading.ThreadHelper.ThreadStart_Context(Object state) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Threading.ThreadHelper.ThreadStart() InnerException:

  Read the article

• Calculate car filled up times

  - by Ivan

  Here is the question: The driving distance between Perth and Adelaide is 1996 miles. On the average, the fuel consumption of a 2.0 litre 4 cylinder car is 8 litres per 100 kilometres. The fuel tank capacity of such a car is 60 litres. Design and implement a JAVA program that prompts for the fuel consumption and fuel tank capacity of the aforementioned car. The program then displays the minimum number of times the car’s fuel tank has to be filled up to drive from Perth to Adelaide. Note that 62 miles is equal to 100 kilometres. What data will you use to test that your algorithm works correctly? Here is what I've done so far: import java.util.Scanner;// public class Ex4{ public static void main( String args[] ){ Scanner input = new Scanner( System.in ); double distance, consumption, capacity, time; distance = Math.sqrt(1996/62*100); consumption = Math.sqrt(8/100); capacity = 60; time = Math.sqrt(distance*consumption/capacity); System.out.println("The car's fuel tank need to be filled up:" + time + "times"); } } I can compile it but the problem is that the result is always 0.0, can anyone help me what's wrong with it ?

  Read the article

• How to disable multitouch?

  - by cannyboy

  My app has several buttons which trigger different events. The user should NOT be able to hold down several buttons. Anyhow, holding down several buttons crashes the app. And so, I'm trying to disable multi-touch in my app. I've unchecked 'Multiple Touch' in all the xib files, and as far as I can work out, the properties 'multipleTouchEnabled' and 'exclusiveTouch' control whether the view uses multitouch. So in my applicationDidFinishLaunching I've put this: self.mainViewController.view.multipleTouchEnabled=NO; self.mainViewController.view.exclusiveTouch =YES; And in each of my view controllers I've put this in the viewDidLoad self.view.multipleTouchEnabled=NO; self.view.exclusiveTouch=YES; However, it still accepts multiple touches. I could do something like disable other buttons after getting a touch down event, but this would be an ugly hack. Surely there is a way to properly disable multi-touch?

  Read the article

• Average performance of binary search algorithm?

  - by Passionate Learner

  http://en.wikipedia.org/wiki/Binary_search_algorithm#Average_performance BinarySearch(int A[], int value, int low, int high) { int mid; if (high < low) return -1; mid = (low + high) / 2; if (A[mid] > value) return BinarySearch(A, value, low, mid-1); else if (A[mid] < value) return BinarySearch(A, value, mid+1, high); else return mid; } If the integer I'm trying to find is always in the array, can anyone help me write a program that can calculate the average performance of binary search algorithm? I know I can do this by actually running the program and counting the number of calls, but what I'm trying to do here is to do it without calling the function. I'm not asking for a time complexity, I'm trying to calculate the average number of calls. For example, the average number of calls to find a integer in A[2], it would be 1.67 (5/3).

  Read the article

• To store images from UIGetScreenImage() in NSMutable Array

  - by sujyanarayan

  Hi, I'm getting images from UIGetScreenImage() and storing directly in mutable array like:- image = [UIImage imageWithScreenContents]; [array addObject:image]; [image release]; I've set this code in timer so I cant use UIImagePNGRepresentation() to store as NSData as it reduces the performance. I want to use this array directly after sometime i.e after capturing 1000 images in 100 seconds. When I use the code below:- UIImage *im = [[UIImage alloc] init]; im = [array objectAtIndex:i]; UIImageWriteToSavedPhotosAlbum(im, nil, nil, nil); the application crashes. And I dont want to use UIImagePNG or JPGRepresentation() in timer as it reduces performance. My problem is how to use this array so that it is converted into image. If anybody has idea related to it please share with me. Thanks in Advance.

  Read the article

• PIC C - USB_CDC_GETC() and retrieving strings.

  - by Adam

  Hi all, I'm programming a PIC18F4455 Microcontroller using PIC C. I'm using the USB_CDC.h header file. I have a program on the computer sending a string such as "W250025". However, when I use usb_cdc_getc() to get the first char, it freezes. Sometimes the program sends only 'T', so I really want to just get the first character. Why does my code never execute past received=usb_cdc_getc(); when I send "W250025"? if (usb_cdc_kbhit()) { //printf(lcd_putc, "Check 3"); delay_ms(3000); printf(lcd_putc, "\f"); received = usb_cdc_getc(); printf(lcd_putc, "Received "); lcd_putc(received); delay_ms(3000); printf(lcd_putc, "\f"); if (received == 'W'){ //waveform disable_interrupts(INT_TIMER1); set_adc_channel(0); load_and_print_array(read_into_int(), read_into_int());} else if (received == 'T'){ //temperature set_adc_channel(1); enable_interrupts(INT_TIMER1);} }

  Read the article

• Uncaught OAuthException

  - by Christopher 'Cj' Jesudas

  Guys please help me out with this...the error which my program gives is "Fatal error: Uncaught OAuthException: Error validating application"... My program code is : require ("src/facebook.php"); $appapikey = '132347710178087'; $appsecret = 'e27456d003801ae145a77ab28904fca0'; $facebook = new Facebook($appapikey, $appsecret); $user_id = $facebook->getUser(); $friends = $facebook->api('friends.get'); echo "<p>Hello <fb:name uid=\"$user_id\" useyou=\"false\" linked=\"false\" firstnameonly=\"true\"></fb:name>, you have ".count($friends)." friends"; foreach($friends as $friend){ $infos.=$friend.","; } $infos = substr($infos,0,strlen($infos)-1); $gender=$facebook->api_client->users_getInfo($infos,'sex'); $gender_array = array(); foreach($gender as $gendervalue){ $gender_array[$gendervalue[sex]]++; } $male = round($gender_array[male]*100/($gender_array[male]+$gender_array[female]),2); $female = 100-$male; echo "<ul><li>Males: $male%</li><li>Females: $female%</li></ul>";

  Read the article

• How to make designer generated .Net application settings portable

  - by Ville Koskinen

  Hello, I've been looking at modifying the source of the Doppler podcast aggregator with the goal of being able to run the program directly from my mp3 player. Doppler stores application settings using a Visual Studio designer generated Settings class, which by default serializes user settings to the user's home directory. I'd like to change this so that all settings would be stored in the same directory as the exe. It seems that this would be possible by creating a custom provider class which inherits the SettingsProvider class. Has anyone created such a provider and would like to share code? Update: I was able to get a custom settings provider nearly working by using this MSDN sample, i.e. with simple inheritance. I was initially confused as Windows Forms designer stopped working until I did this trick suggested at Codeproject: internal sealed partial class Settings { private MySettingsProvider settingsprovider = new MySettingsProvider(); public Settings() { foreach (SettingsProperty property in this.Properties) { property.Provider = settingsprovider; } ... The program still starts with window size 0;0 though. Anyone with any insight to this? Why the need to assing the provider in runtime---instead of using attributes as suggested by MSDN? Why the changes in how the default settings are passed to the application with the default settings provider vs. the custom one?

  Read the article

• Continual crashing in MKMapView annotationContainer:viewForAnnotation

  - by Oscar Goldman

  I've looked at other reports on this, and none seems to apply. Our app is being crippled by frequent (but not reliably reproducible) crashes like this: Reports of this turn up a lot on the Web, but many seem to go unsolved. I'm not doing anything crazy, just showing the user position and one marker on the map. I followed the examples I could find, and I've looked at the code for goofs but can't find any. Here's how my MapView delegate handles viewForAnnotation: The crash appears to be associated with a change in the user's location, but once the user-location marker is added, I don't mess with it. When I need to refresh the one other map marker, I skip the user marker when removing the other one: The delegate is the controller for the whole screen, so it's not being deallocated; the crash occurs while the screen is up. Not that it matters, but the map display looks like this: Any guesses or insight would be much appreciated! This is on iOS 5.0.1.

  Read the article

• write() causes fatal crash when filedescriptor becomes invalid

  - by ckrames1234

  I'm writing an iPhone App with a webserver in it. To handle a web request, I take the web request and write() to it the data that I want to send back. When I try to download a moderately sized file (3-6MB) it works fine, but if I cancel the download halfway through, the app crashes and leaves no trace of an error. I'm thinking that the file descriptor becomes invalid halfway through the write, and causes the crash. I really don't know if this is what causes the crash, i'm just assuming. I'm basing my webserver off of this example. NSString *header = @""; NSData *data = [NSData dataWithContentsOfFile:fullPath]; write (fd, [header UTF8String], [header length]); write(fd, [data bytes], [data length]); close(fd); Does anyone know how to fix this? I was thinking about chunking the data and then writing each part, but I don't think it would help.

  Read the article

• Super wide, but not so tall, bitmap?

  - by Erik Karlsson

  Howdy folks. Is there any way to create a more space/resource efficient bitmap? Currently i try to render a file, approx 800 px high but around 720000px wide. It crashes my application, presumebly because of the share memory-size of the bitmap. Can i do it more efficient, like creating it as an gif directly and not later when i save it? I try to save a series of lines/rectangles from a real world reading, and i want it to be 1px per 1/100th of a second. Any input? And btw, i never manage to ogon using google open id : /

  Read the article

• objective c id *

  - by joels

  I am using the KVO validations in my cocoa app. I have a method - (BOOL)validateName:(id *)ioValue error:(NSError **)outError My controls can now have their bindings validate. How do I invoke that method with a id * NOT id To use the value that is passed in (a pointer to a string pointer) I call this: NSString * newName = (NSString *)*ioValue; if ([newName length] < 4) { otherwise i get bad exec crashes... passing in with type casting doesnt work: (id *)myStringVar passing in with a regular id doesnt work either : (id) myStringVar

  Read the article

• Can't access CodeBase from a dynamically generated assembly.

  - by Michael Meadows

  I'm trying to create an assembly dynamically in .Net. I can't seem to figure out how to get the CodeBase property to return a value, however. Here's an example: var assemblyName = new AssemblyName { Name = "Whatever", CodeBase = Directory.GetCurrentDirectory() }; var assemblyBuilder = AppDomain.CurrentDomain .DefineDynamicAssembly(assemblyName, AssemblyBuilderAccess.RunAndSave); var moduleBuilder = assemblyBuilder.DefineDynamicModule("WhateverModule", "Whatever.dll"); var typeBuilder = moduleBuilder.DefineType("WhateverType", TypeAttributes.Public); var type = typeBuilder.CreateType(); assemblyBuilder.Save("Whatever.dll"); var codeBase = type.Assembly.CodeBase; // throws the below exception System.NotSupportedException was unhandled Message=The invoked member is not supported in a dynamic assembly. Source=mscorlib StackTrace: at System.Reflection.Emit.InternalAssemblyBuilder.get_CodeBase() at Stupid.Program.Main(String[] args) in C:\Users\Walking Disaster\Documents\Visual Studio 10\Projects\Lingual.Proxy\Stupid\Program.cs:line 25 at System.AppDomain._nExecuteAssembly(RuntimeAssembly assembly, String[] args) at System.AppDomain.ExecuteAssembly(String assemblyFile, Evidence assemblySecurity, String[] args) at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly() at System.Threading.ThreadHelper.ThreadStart_Context(Object state) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Threading.ThreadHelper.ThreadStart() Can anyone see what I'm doing wrong?

  Read the article

< Previous Page | 353 354 355 356 357 358 359 360 361 362 363 364  | Next Page >