Search Results

Search found 15209 results on 609 pages for 'configuration'.

Page 380/609 | < Previous Page | 376 377 378 379 380 381 382 383 384 385 386 387  | Next Page >

• Enterprise Portal Issue with the Ax Demo VPCs

  - by ssmantha

  Microsoft’s Ax Demo VPC is basically configured for a static IP address 192.168.0.1, this is due to the fact that the VPC has Domain Controlller configured in it which requires a static IP. When we put this VPC on a network with a different subnet and change the IP you can observer that the site http://sharepoint and http://sharepoint/EP cease to function and show “Page Not Found” errors in the browser. This is mainly due to the DNS configuration which is not updated. Below is the screen shot of the changes that needs to be done to make the site functioning properly. Change the following entries in the Forward Lookup Zones of DNS management: These websites default, SharePoint and projectserver are all mapped to a single port in the IIS i.e. port number 80. These websites are recognised with host headers. These host headers are configured in DNS with incorrect IP address entries in DNS when you change the IP address of the VPC. Just change these values to point to the Local Loop Adapter (127.0.0.1) and change the DNS to point to this address in the TCP/IP properties as shown below: This will resolve the issue with the website rendering. Initially you may get time out errors while browsing these website. be patient and try again this would work.

  Read the article

• ssh freezes when trying to connect to some hosts

  - by NS Gopikrishnan

  When I try to ssh to particular machine/s in a list, The SSH command happens to be freezing. I tried out setting ssh timeout. But then also it's freezes even after the timeout. In verbose mode : OpenSSH_3.9p1, OpenSSL 0.9.7a Feb 19 2003 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to x358.x.server.com [10.x.x.x] port 22. debug1: fd 3 clearing O_NONBLOCK debug1: Connection established. debug1: identity file /export/home/sqlrpt/.ssh/identity type -1 debug1: identity file /export/home/sqlrpt/.ssh/id_rsa type -1 debug1: identity file /export/home/sqlrpt/.ssh/id_dsa type 2 At this point it freezes. A work around I thought was to create a child process for each ssh calls and if the process doesn't respond after a timeout - Kill it. But are there any less complex ways, so that I can accommodate it in a shell script itself rather than going for a C/C++ program ?

  Read the article

• FreePBX: Asterisk in the Cloud (EC2) Audio Problems

  - by neezer

  Please pardon the newbie question, but I can't seem to figure this out. I followed the Voxilla's tut to the tee: http://voxilla.com/2009/10/15/voxill...p-by-step-1457 But in making calls, my softphones connect, yet no audio (in either direction). I know from poking around the forums that this is generally caused by two factors: NAT and audio codecs. I (being new to the arena), however, don't know which. I believe I have Asterisk and the clients restricted to just ulaw, and I also believe I have the correct ports open, and my externip set correctly (I think the Voxilla AMI does this automatically, since it's in the cloud). I'm a bit lost. I'd be happy to post whatever configuration files that might help, provided you tell me where they are on the filesystem. But like I said before, this is effectively a vanilla install of Voxilla's own FreePBX AMI. I'd appreciate any help or guidance here. Thanks!

  Read the article

• SSRS report on SharePoint Web Part

  - by MicroSumol

  I have this configuration: DBK- SQL/SSRS/SSAS (includes SharePoint databases) SPK- SharePoint I created a SharePoint Site with an SSL certificate. Then on DBK I setup the SSRS with an SSL. Finaly went back to SharePoint and setup a webpart on a subsite to connect to the SSRS report. The problem comes that the user is asked 2 times to authenticate. Once when he logs into sharepoint, then when he wants to see the SSRS report. Since I am not an expert on SSRS, I am asking is there an easy way to pass the SharePoint credentials to the SSRS report. Would it be easier to install SSRS on SPK? Would that even work or solve my problem?

  Read the article

• Dropbox fails to install on Ubuntu 13.10

  - by Fraxav

  I've done some research and it seems Dropbox has some problems with the status icon on Ubuntu 13.10, but I can't even manage to install it. The very first time, I installed nautilus-dropbox from the app center on a freshly installed Saucy, but I couldn't see the status icon and clicking the app icon wouldn't help, so I uninstalled and rebooted. The second and third time, the app just freezed at about 75% while installing from app manager, so I had to shut down the computer and uninstall. Next I tried to install dropbox from the .deb (from website): it installed (the launcher?) from app manager, then the dialog prompted me to start dropbox and finally to download the official daemon, but the download freezed at 0% and made everything else buggy/laggy (probably also because I restarted nautilus, as required, at that point). After a purge and clean from terminal, some icons and this file (which I suspect is somehow responsible, but of course is locked) are still present on my computer. Can anyone help me figure how how to install it? How could I remove that configuration file so I can give it a last shot?

  Read the article

• Squid3 not working. Access denied

  - by Nitish

  I installed SQUID3 on a Linux machine with two ethernet interfaces (eth0 and eth1). I used the default settings in the squid.conf file and uncommented the two lines acl localnet src 192.168.0.0/16 and http_access allow localnet. eth0 is connected to a router, which provides Internet access. It is assigned an IP 192.168.1.2 by the router. I manually configured eth1 to have an IP address 192.168.5.1. It is connected to a switch. Systems having IP addresses 192.168.5.x are connected to this switch. I ran these two commands for NAT: iptables -t nat -A PREROUTING -i eth1 -p tcp -m tcp --dport 80 -j DNAT --to-destination 192.168.5.1:3128 iptables -t nat -A PREROUTING -i eth0 -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 3128 But when I try to access internet from a system having IP 192.168.5.2 through the proxy I get an error that says "Access denied". What is wrong with my configuration?

  Read the article

• Logical move of a server to UK, what do I do with the SSL certificates

  - by flyfishr64

  I have been asked to move a rails application from the US to the UK. This involves bringing up the rails stack on Ubuntu 8.04.4; that's completed. I'm stumped with the SSL configuration though. The plan was to bring this server up with the same domain name but temporarily use a subdomain (app2.xxx.com instead of app.xxx.com) during the move and for testing, then rename it to app.xxx.com when we're ready for the cutover (does that make sense?). In the meantime, we need a new cert for the app2 subdomain. So to generate a CSR, I need a server key but do I need a new one, or should I copy the one from the existing production server?

  Read the article

• Remove a known network from Windows 8

  - by Edward Brey

  When Windows 8 detects a network based on the assigned IP address, netmask, default gateway, etc., it remembers the network along with the setting you give it as a public or private network. If you change the configuration of a network (e.g. reconfigure your router), Windows may determine you are on a new network and assign it a name of Network 2 or YourAPN 2. This less-than-friendly name shows up in many places in the Windows 8 UI, but unlike the good old days of Windows 7, there doesn't appear to be any UI to merge or delete these networks. What's the best way to merge or delete networks you don't want?

  Read the article

• Local Group Policy Editor reverting setting to default

  - by Timur Aydin

  On my Windows 7 Ultimate 32bit system, I have changed the following setting: Local Computer Policy - Computer Configuration - Windows Settings - Security Settings - Local Policies - User Right Assignment - Deny access to this computer from the network This setting was by default "Guest" and I deleted this so that Guest can access a defined network share over the LAN. But later, I have changed my mind and wanted to return this setting to its default. So I edited that setting and specified Guest. But the setting became MYWINPC\Guest. So my question is, what is the difference between the previous setting "Guest" and MYWINPC\Guest? And how do I return this setting to its default value, "Guest"?

  Read the article

• fastcgi-mono-server with Nginx is much slower than xsp4

  - by marxin

  We started testing our MVC4 app on xsp4 server compiled with mono-3.0.3, speed was enough and we decided to set up production fastcgi-mono-server4 (version 2.11.0.0) with nginx (1.2.6-r1). Single query that loads some JSON query took ~200ms on XSP4, but Nginx serves the query in about 1.2s and I am wondering where could be such a slow down? I followed nginx configuration: http://www.mono-project.com/FastCGI_Nginx and fastcgi-mono-server4 uses socket for listening nginx. Do you have any ideas how to log some time stamp which will help me? Thanks

  Read the article

• Basic Puppet installation with Solaris 11.2 beta

  - by user13366125

  At the recent announcement we talked a lot about the Puppet integration. But how do you set it up? I want to show this in this blog entry. However this example i'm using is even useful in practice. Due to the extremely low overhead of zones i'm frequently seeing really large numbers of zones on a single system. Changing /etc/hosts or changing an SMF service property on 3 systems is not that hard. Doing it on a system with 500 zones is ... let say it diplomatic ... a job you give to someone you want to punish. Puppet can help in this case making of managing the configuration and to ease the distribution. You describe the changes you want to make in a file or set of file called manifest in the Puppet world and then roll them out to your servers, no matter if they are virtual or physical. A warning at first: Puppet is a really,really vast topic. This article is really basic and it doesn't goes more than just even toe's deep into the possibilities and capabilities of Puppet. It doesn't try to explain Puppet ... just how you get it up and running and do basic tests. There are many good books on Puppet. Please read one of them, and the concepts and the example will get much clearer immediately. (more)

  Read the article

• How to secure Apache for shared hosting environment? (chrooting, avoid symlinking...)

  - by Alessio Periloso

  I'm having problems dealing with Apache configuration: the problem is that I want to limit each user to his own docroot (so, a chroot() would be what I'm looking for), but: Mod_chroot works only globally and not for each virtualhost: i have the users in a path like the following one /home/vhosts/xxxxx/domains/domain.tld/public_html (xxxxx is the user), and can't solve the problem chrooting /home/vhosts, because the users would still be allowed to see each other. Using apache-mod-itk would slow down the websites too much, and I'm not sure if it would solve anything Without using any of the previous two, I think the only thing left is avoiding symlinking, not allowing the users to link to something that doesn't belong to them. So, I think I'm going to follow the third point but... how to efficiently avoid symlinking while still keeping mod_rewrite working?! The php has already been chrooted with php-fpm, so my only concern is about Apache itself.

  Read the article

• Linux IO scheduler on databases with RAID

  - by Raghu

  Hi, I have a linux database(MySQL) server(Dell 2950) with a 6-disk RAID 10. The default IO scheduler on it is CFQ. However, from what I have read and heard, there is no need for a scheduler like CFQ when reordering/scheduling is also done by underlying RAID controller; on the contrary since it does not account underlying RAID configuration into account performance may actually degrade with CFQ. The primary concern is to reduce CPU usage and improve throughput. Also, I have seen recommendations of using noop/deadline IO scheduler for databases primarily because of the nature of their R/W access.

  Read the article

• snort-mysql not starting on Ubuntu server

  - by Rsaesha

  I am following this tutorial: https://help.ubuntu.com/community/SnortIDS I've set up the database, everything has installed correctly, and I've configured the snort.conf file so it outputs to a database (with creds all filled out ok). When I run /etc/init.d/snort start, it fails but does not produce any error message other than [fail]. The last few lines of /var/log/syslog are: snort[5687]: database: must enter database name in configuration file#012 snort[5687]: FATAL ERROR: My output database line in the snort.conf file is: output database: log, mysql, user=snort password=... dbname=snort host=localhost I have tried it with the commas separating everything, putting quotes around stuff, etc. The password is only made up of letters (after I thought maybe a number was throwing it off).

  Read the article

• Cannot connect to wireless network

  - by smr

  I am quite new to using Ubuntu 12.10. All I remember while installing Ubuntu 12.10 was that I didn't check any box specifically to enable wireless connectivity. I tried looking into the various questions posted here - most of them refer to certain commands (redundantly sudo) and things of that sort. I am quite new and wasn't sure of understanding what those commands were trying to do (the network configuration settings - showed up different options, like 'Wireless', 'Wired', 'IPv4', 'IPv6' etc -- I am not sure of what sort of settings are to be made - like for example what sort of 'WEP' settings etc are to be made. Although I wasn't able to connect to the wireless network, I was able to connect to the internet, once I plugged in the ethernet cable. Can someone help me with: 1) Understandng a way to see if Ubuntu is configured to connect to a wireless network. 2) If so - Getting to configure to a wireless network (setting up a new one). 3) Where in ubuntu, should I look for seeing if there are any hardware devices (such as the Broadcom wireless adapter or things of that sort - like the way we use the 'Device manager' in Windows to look into the adapter settings). 4) Reference material to learn and understand the various ubuntu commands. (things like the -lshw etc).

  Read the article

• Install ubuntu on MacBook Pro

  - by n179911

  Hi, Can you please tell me what is the preferred way to install Ubuntu on MacBook Pro? I have a MacBook Pro with MacOSX 10.5. I need a Linux environment some times. So what is the best way to achieve that? 1. Make it dual boot? (but I don't know if that is possible with MacBook) 2. Install Virtual Box and then put Ununtu on top of it? (But I am not sure if this configuration will be slow, so I need a Linux environment for coding, so it needs to do compiling and debugging and stuff). Thank you for any tips.

  Read the article

• What's necessary for automatic IPv6 tunnel configurations?

  - by deceze

  What kind of (server) infrastructure is necessary for automatic IPv6 tunneling to work? How would a client automatically find an endpoint? I'm not even sure if this is a standard feature of IPv6 or not, but setting up an IPv6 tunnel using an Apple Airport base station I noticed that it offers IPv6 tunneling with automatic configuration. Trying it, it didn't work (i.e. it failed to establish a tunnel). I'd imagine the ISP would need to run some sort of server advertising where an endpoint can be found? How is this supposed to work exactly?

  Read the article

• PHP 5.4.7 and Apache 2.2 Trouble under Windows XP

  - by IssamTP

  I'm trying to setup a test enviroment on a virtual machine running Windows XP Home (totally updated), with Apache 2.2 and PHP 5.4.7. I can load the PHP 5 module inside httpd.conf and if I don't rename php.ini-DEVELOPMENT (or -PRODUCTION) file to php.ini, the engine works fine. This basic configuration doesn't have MySQL module loaded, so I have to rename rename the .ini-DEVELOPMENT into .ini and edit as follows: ; Directory in which the loadable extensions (modules) reside. ; http://php.net/extension-dir ; extension_dir = "./" ; On windows: extension_dir = "C:/php/ext/" ... extension=php_mysql.dll extension=php_mysqli.dll Restart Apache with no problems and... all I can get is a blank page. Where can I see some error or do you know where is the trouble? Tell me if I need to post something else to give you more details.

  Read the article

• How do you pick what server setup you need?

  - by ed209

  I recently started receiving pubsub data feed from etsy. It averages around 250 notifications per minute. But obviously, when the USA wakes up that spikes quite heavily. I want to be able to deal with those spikes (about 3 per day) but the rest of day is fine. What's the best method of getting the right server configuration. My current approach is to keep upgrading until the server stops dying... next leap is: Processor: AMD Phenom II X6-1055T HEXA Core RAM: 4GB DDR2 SDRAM HD1: SATA Drive (7,200 rpm) (+500 GB 7200 RPM SATA hard drive) HD2: SATA Backup Drive (+500 GB SATA (7,200 rpm)) OS: Linux OS (+CentOS 5 64-bit) Bandwidth: 6000GB Monthly Transfer (3000 in + 3000 out) (+100M uplink port) What's the best approach to working out what sort of server setup you need?

  Read the article

• smartOS HPC config suggestion

  - by Andrew B.

  I'm configuring a brand new HPC server and am interested in using SmartOS because of it's virtualization control and zfs features. Does this configuration make sense for a SmartOS HPC, or would you recommend an alternative? System Specs: 2x 8-core xeon 384 GB RAM 30 TB HDs with 2x512GB SSDs Uses: - zfs for serving data to different vms, and over the network; 1 SSD for L2ARC and 1 for ZIL - typically 1-2 ubuntu instances running R and custom C/C++ code My biggest concerns as a newbie to SmartOS and ZFS are: (1) will I get near-metal performance from ubuntu running on SmartOS if it is the only active vm? (2) how do I serve data from the global zfs pool to the containers and other network devices?

  Read the article

• Is there any chance that my data will get silently corrupted with a robocopy SMB network transfer?

  - by Archagon

  I'm setting up a NAS box for the first time. At the moment, I have most of my data backed up to a few local hard drives, and I intend to transfer all the data to my NAS over ethernet once the RAID array is setup. Since this is all happening over the network, I'm a bit worried about my data getting corrupted silently during transfer. From what I understand, data generally doesn't get corrupted without notice on local transfers because a checksum is performed at some point by the drive or the OS. (This could be totally wrong.) Does the same thing happen with SMB, or is it up to the transferrer to check the integrity of their data? And if it doesn't happen with SMB, is there a protocol that does ensure data integrity? I know that rsync can checksum a transfer, but I'm on Windows and I already have a robocopy configuration that I like. Will my data be safe or do I have to use an external checksum tool to make sure?

  Read the article

• Wifi doesn't connect if I'm upstairs

  - by user11233

  Hello there, I'm finding that Wifi connects when I'm in the living room, where the internet router etc is. But if I try to connect upstairs it is a no go. Booting in Windows 7 (dual boot :D ) I find that Wifi connects. I find this very confusing and have it since the install. Please help! Kind regards. #sudo lshw -c network *-network description: Wireless interface product: PRO/Wireless 5100 AGN [Shiloh] Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 00 serial: 00:21:5d:1a:63:58 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=2.6.35-26-generic firmware=8.24.2.12 ip=10.0.0.4 latency=0 link=yes multicast=yes wireless=IEEE 802.11abg resources: irq:49 memory:de200000-de201fff Hope it helps! Hello guys, just tried to connect internet upstairs and to my surprise it does connect. Don't know exactly why. Only thing I've done recently is input the codes said bij Oli. Two things I've done on my own 1: installed Jupiter and 2: installed laptop-mode-tools. I really don't know if this can effect my internet but it's the only thing I can think of. Thanks for all the help, really appreciate it :) PS If someone thinks it might be helpful for others I would like to help find a 'real' solution to this problem. Just post down what I need to post here and I will try my best to help.

  Read the article

• StarterSTS 1.1 CTP &ndash; ActAs Support

  - by Your DisplayName here!

  Due to popular demand, I added identity delegation (aka ActAs) support to StarterSTS. To give this feature a try, first download the new bits and add a enableActAs = true to startersts.config. You then have to configure which user account is allowed to delegate, as well as the target realm to delegate to. This is done in usermappings.config, e.g.: <userMappings xmlns="http://www.thinktecture.com/configuration/usermappings">     <user name="middletier">       <mappings>         <mapping type="ActAs"                  value="https://server/service.svc" />       </mappings>     </user>   </users> </userMappings> Please use the forum for any feedback. thanks!

  Read the article

• Is there a way how to customize my keyboard layout in Xubuntu in a graphical way (by clicking)?

  - by Honza Javorek

  Possible duplicate, but I really couldn't find a solution. I would like to adjust my US keyboard layout, e.g. to add possibility to type some special characters on combination of right Alt + another character, etc. Moreover, my arrow up is dead, so until I buy another keyboard, I'd like to use my right shift as my arrow up, ASAP. However, there seems to be no way how to edit my keyboard layout easily in Xubuntu :( I found no editor and I really don't want to spend years in some configuration files and terminal (not that I can't, but I really really don't want). KLE - the only editor I could find, but no installation guide, no package, no PPA, no idea how to make it working (and uninstallable if not needed one day) Editor in Ubuntu - apparently not present in Xubuntu I found several tutorials how to change the layout, but they all seems to be complicated and not easy to follow. I don't want to spend a weekend in terminal or so, I am looking for an app to launch, make some clicking, finish my work by hitting Save button and - done! Please, is there such solution? For humans?

  Read the article

• Unable to start Ubuntu 12.04. The system is running in low-graphics

  - by kaleidoscpicsoul

  I am a newbie to Ubuntu. I installed Ubuntu 12.04 using a USB Stick and it was running all fine for a few weeks and this error popped up. According to one of my friend, the best way was to re-install Ubuntu. Being from a non unix background i thought the same too and after the second install it happened again, but only this time was much quicker, in 3 days. I don't want to re-install Ubuntu every time this happens. I am a complete newbie to Linux which means that i am really bad at using terminal. I know there are other people who fixed this issue using this very same forum, but unfortunately the answers provided are too complex for me to understand. Please let me know how to do this. Things I want to let you know: I would need help step by step if that is alright with you. After i get the error i get the options and i click exit to console login I get the following message in a black screen (which i think is a command line sort of thing): * Stopping save kernel messages [OK] apache2: Could not reliably determine the server's fully qualified domain name,using 127.0.1.1 for ServerName [OK] * Starting web server apache2 and a blinking cursor. So basically it looks like a dead end for my non unixy eye. And one final thing is before this issue had happened i had tried configuring Python to Apache2. For that i had uninstalled and installed LAMP server several time and edited the configuration files too. I don't know if this really is a concern, but I don't know.. I have a USB with Ubuntu 12.04 in it so i can install it anytime. (But i want to know what the issue is rather than running away) . I migrated to Ubuntu from Windows and i have no plans to go back. I think that's from my side. Please let me know if there are any questions.

  Read the article

< Previous Page | 376 377 378 379 380 381 382 383 384 385 386 387  | Next Page >