Search Results

Search found 22585 results on 904 pages for 'message generator'.

Page 391/904 | < Previous Page | 387 388 389 390 391 392 393 394 395 396 397 398  | Next Page >

• dbus error on 14.04 after system is left idle for a few hours

  - by user281513

  I did a clean install of 14.04 on a crucial M4 64gb ssd. The system boots in less than 30 seconds now! but.. when I leave it idle for a few hours and log back in nothing works .. if I do a simple command like df ..I get a dbus error message. I also have a toshiba sata disk mounted for general storage since the ssd is so small .. nothing appears to be damaged when I reboot but it is extremely annoying .. any ideas on how to correct this will be appreciated.

  Read the article

• Best Practice to return responses from service

  - by A9S6

  I am writing a SOAP based ASP.NET Web Service having a number of methods to deal with Client objects. e.g: int AddClient(Client c) = returns Client ID when successful List GetClients() Client GetClientInfo(int clientId) In the above methods, the return value/object for each method corresponds to the "all good" scenario i.e. A client Id will be returned if AddClient was successful or a List< of Client objects will be returned by GetClients. But what if an error occurs, how do I convey the error message to the caller? I was thinking of having a Response class: Response { StatusCode, StatusMessage, Details } where Details will hold the actual response but in that case the caller will have to cast the response every time. What are your views on the above? Is there a better solution? ---------- UPDATED ----------- Is there something new in WCF for the above? What difference will it make If I change the ASP.NET Web Service to a WCF Service?

  Read the article

• Issues with external mounting after pysdm removed

  - by K. R. Huard

  So, I'm very new to ubuntu. I was having troubles getting my external hard drive to be read/write permission. It's owner is my macbook, and writing on the drive was repeatedly denied. In trying to sort this out, I tried the Nautilus commands (no success), installed the PYSDM application, changed some things (as suggested by this user in this forum http://askubuntu.com/a/113992 )but then found that I was getting an error message whenever I tried to mount an external storage device. The error is: Unable to mount DERPSTICK error mounting: mount exited with exit code 1: helper failed with: [mntent]: line 14 in etc/fstab is bad mount: only root can mount /dev/sdc1/ on /media/sdc1 Others with similar problems put their fstab up here, but I'm not sure how to bring it up, or if I should even try. Thanks for your time!

  Read the article

• phishing attack. Where do I start the cleanup?

  - by Suz

  I'm a newbie webmaster. I've got a domain and a site... and no clue about the web (I'm OK with files and programs... ) I got a message from google that my site is a possible phishing site, with a link the the suspect page: http://www.mydomain.com/~phishers/Paypal/us/Confirm.php needless to say, I didn't put that up. Can someone point me to a good tutorial on what to do now? I'd like to figure out what happened so I can defend against it the next time around. How do I identify what kind of attach this is? Also, what is the tilde doing in the URL path? I couldn't find any path like this on my hosting account, so I'm not entirely sure how to delete it.

  Read the article

• Daemon for moving files between partitions?

  - by RATHI

  I have a system with Ubuntu installed in 20GB and windows in 100 GB, two partitions - each of 100GB using NTFS. While using DC++ (multiple downloading of big file) I used to get message that system is running out of memory. Is there any way to make a deamon which will be checking the Ubuntu partition so that if its used space goes up to a certain amount (let's say 18 GB) it will automatically start a moving file from this drive to another drive (let's assume it will pick the file from movie folder or largest media file from this drive to move)? Or it prompt to ask from user which file to move? Is there any program which can do this for me? If not, can you suggest something to read so that I could make it?

  Read the article

• How to clean launch a GUI app via the Terminal (so it doesn't wait for termination)?

  - by Peter.O

  Some GUI apps launch cleanly via the Terminal command line. Some don't, and they cause the Terminal to wait for the app to terminate. ...and even then, some don't "release" the command line. The mysterious ampersand "&" suffix, seems to cause the terminal to put the process into the background... (but I'm not sure what happens there). Is there a way to launch an app via the Terminal, so that there is no "hang on" effect? ... just like launching something via F2. I'd like to have the command line available again, immediately (without something still in the background and writing out system message in the terminal).

  Read the article

• Instantiating Interfaces in C#?

  - by RealityDysfunction

  I am reading/learning about interfaces in C# at the moment, and thus far I managed to understand how it differs from an abstract class. In the book I am reading the author explains that interfaces are the ultimate abstract class and that it simply sets the standard of certain methods the inheriting class will have, but then provides the following example... static void Main(string[] args) { ... Circle c = new Circle("Lisa"); IPointy itPt = null; try { itPt = (IPointy)c; Console.WriteLine.(itPt.Points); } catch (InvalidCastException e) { Console.WriteLine(e.Message); } ... } The line that absolutely throws me off is the "IPointy itfPt=null;" did he just declare an interface??? I thought interfaces are abstract and can only be inherited? What kind of sorcery is going on here? Thanks for any help, I

  Read the article

• C# Image Download

  - by Nouman Zakir

  A C# class that makes it easier to download images from the web. Use the following code in your program to download image files such as JPG, GIF, PNG, etc from the internet using WebClient class. using System;using System.Drawing;using System.Drawing.Imaging;using System.IO;using System.Net;public class DownloadImage { private string imageUrl; private Bitmap bitmap; public DownloadImage(string imageUrl) { this.imageUrl = imageUrl; } public void Download() { try { WebClient client = new WebClient(); Stream stream = client.OpenRead(imageUrl); bitmap = new Bitmap(stream); stream.Flush(); stream.Close(); } catch (Exception e) { Console.WriteLine(e.Message); } } public Bitmap GetImage() { return bitmap; } public void SaveImage(string filename, ImageFormat format) { if (bitmap != null) { bitmap.Save(filename, format); } }}

  Read the article

• Will GMails Greasemoney API help me: composing and sending messages, adding a button to the compose view, listing and sending drafts [migrated]

  - by Kent

  I want to create a Greasemonkey script for GMail and I've browsed through the GMail Greasemonkey 1.0 API documentation. I haven't fully understood what the API actually provides, which leads me to ask a few concrete questions. How will the API help if I want to: Add a button to the Compose view which executes some of my code. Compose and send a new message from scratch. List the current drafts. Pick a draft and send it. From what I can see it'll help me with 1 above, but I don't see any real interaction API parts which can help me with 2-4.

  Read the article

• How to recover Wordpress on GoDaddy hosting after reseting database password? [migrated]

  - by Tom Brito

  I did reset my database password, so I could enter the phpMyAdmin, but now my Wordpress installation can't connect to the database. I tried to access the "wp-config.php" (should be at http://mysite.com/wp-config.php right?) but, again, I get the "can't connect to database" message. Also, now when I try to access the file manager on the GoDaddy hosting, I get "The page isn't redirecting properly". I did e-mail the GoDaddy support, and I'm researching while they do not answer. Not sure if it's a GoDaddy or Wordpress issue. Is there any way to fix Wordpress, or I'll need to re-install it?

  Read the article

• after login, the desktop remains blank.

  - by MobileDev123

  Hi, I have installed Ubuntu 10 last night and finished all upgrading stuff, in the time when updates are applied I downloaded a torrent file. As soon as download is finished I rebooted my system. As usual at start up it asked my login and I did the same. After a successful login It should show me the desktop, or show an error message in case anything has gone wrong. But what I had is only a cursor and a blank wall paper. Can anybody tell me what is the problem and how to resolve this? Thanks

  Read the article

• Constant noise in speakers and headphones

  - by user103978

  On my laptop, Samsung 300V5A-S19 I have the constant noise from the speakers. If I wear headphones, the sound becomes more pronounced (at half volume it mutes the music). The noise level is independent of the volume control. The noise disappears only when volume is completely muted. For the record, the sound is reminiscent of the noise of the waves or something like that. System information: Ubuntu 12.10, kernel 3.5.0-18 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) All packages in the system updated. PS: Following the advice from this message (click) yielded no result.

  Read the article

• How do I set a custom resolution in 12.04 with a nVidia video card (9600 GSO)?

  - by Aaron Agarunov

  I have 32 bit 12.04 and my video card drivers are up to date at "304.64" yet my resolution appears capped at 1920x1080. I am trying to get the resolution to 2560x1440 or even higher, as I am running this machine on a 42" LCD through HDMI and the 1920x1080 resolution will not stretch to fit the screen and is therefore fairly zoomed in. The 9600 GSO supports up to 2560x1600, so this should be no problem for the card itself. I have tried using xrandr, which successfully creates the 2560x1440 60 hertz mode but does not allow me to --addmode or --output it in. I have tried working with the xorg.conf, but I actually can not find a way to create the file since when I try to, I am given an error message stating that the # of monitors I have does not match the # of screens I have. Can anyone provide some help or insight?

  Read the article

• Am I sending large amounts of data sensibly?

  - by Sofus Albertsen

  I am about to design a video conversion service, that is scalable on the conversion side. The architecture is as follows: Webpage for video upload When done, a message gets sent out to one of several resizing servers The server locates the video, saves it on disk, and converts it to several formats and resolutions The resizing server uploads the output to a content server, and messages back that the conversion is done. Messaging is something I have covered, but right now I am transferring via FTP, and wonder if there is a better way? is there something faster, or more reliable? All the servers will be sitting in the same gigabit switch or neighboring switch, so fast transfer is expected.

  Read the article

• Can anyone recommend a good SMS gateway for PHP?

  - by Nick

  I'm looking for an SMS gateway that has the following criteria: Supports sending from short codes Opt-in capabilities for end-user (will require user to opt in before sending message) Has a clean API, preferably an XML/ REST API, although SOAP is fine The cheaper the better Honestly, I keep searching and searching all permutations of "SMS Gateway API" etc... on Google and I can't find any great services that can support all of these criteria. There are a lot of really SEO optimized sites and I can't tell which of them are legit. I'm looking for something that will be easy and quick to implement, and none of my colleagues have any recommendations. What APIs have you used (preferably with PHP) that have gotten this job done? Which services have been the most pleasant to deal with, both technically and support-wise? Update: Will be sending primarily (probably solely) in the US.

  Read the article

• Spaces in type attribute for Behavior Extension Configuration Issues

  - by Shawn Cicoria

  If you’ve deployed your WCF Behavior Extension, and you get a Configuration Error, it might just be you’re lacking a space between your “Type” name and the “Assembly” name. You'll get the following error message: Verify that the extension is registered in the extension collection at system.serviceModel/extensions/behaviorExtensions So, if you’ve entered as below without <system.serviceModel> <extensions> <behaviorExtensions> <add name="appFabricE2E" type="Fabrikam.Services.AppFabricE2EBehaviorElement,Fabrikam.Services, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null"/> </behaviorExtensions> </extensions> The following will work – notice the additional space between the Type name and the Assembly name: <system.serviceModel> <extensions> <behaviorExtensions> <add name="appFabricE2E" type="Fabrikam.Services.AppFabricE2EBehaviorElement,Fabrikam.Services, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null"/> </behaviorExtensions> </extensions>

  Read the article

• htaccess allow default page

  - by Jan De Laet

  Having a problem with my .htaccess. I have this to secure all my documents: Order Deny,Allow Deny from all Allow from 127.0.0.1 <FilesMatch "\.(htm|html|css|js|php)$"> Order Allow,Deny Allow from all Allow from 127.0.0.1 </FilesMatch> Now everything works fine, but only my default page www.mysite.com doesn't work and gives me the notification: You don't have permission to access / on this server. what is normal accroding to my coding. But how can you fix this? If there stands www.example.com/index.php it works but if you surf to www.example.com I get this message.

  Read the article

• Problem on application with asp in IIS 7.5 with oracle 11g

  - by Hichem

  We have an application developed with .Net on server 2008 R2 and IIS 7.5 wich is linked liked to oracle 11g on another server. Our problem is that we lose the service every two or three or more. The application stops and we have to restart IIS or the server to continue the job (the number of users is less then 50). We have no error message. Do you know anything to do to avoid this situation, something like: A parameter to put on asp pages A parameter to switch on or off on the server or on the database

  Read the article

• Compiz using 40% CPU on Ubuntu 13.10

  - by Olli

  After upgrading to 13.10, compiz process has started taking up to 40% of CPU resources. In addition, Unity is sluggish just like in this recent question Compiz at 30% of CPU on Thinkpad T420. My PC is HP Compaq NX6310 and Compiz version is 0.9.10.2. First I had error message during boot, but did find solution for that (Bug #1014289) by updating the kernel to newer 3.11.4, it did not change the CPU usage. For the CPU problem I tried solution for Bug #1221837 by adding the line MESA_GL_VERSION_OVERRIDE=1.4 in the file /etc/environment - that did not help me, so my problem seems not to be the same bug. Any suggestions on how to resolve this issue?

  Read the article

• How know if migrate Wubi to partition is successful

  - by meotimdihia

  I run this script https://help.ubuntu.com/community/MigrateWubi and reveiced a message : Found Ubuntu 12.04.1 LTS (12.04) on /dev/sda7 ... migration completed successfully. Then i restarted computer and choose ubuntu from 2 lines Windows Ubuntu . But i don't see what changed, if i am on a partition with Ubuntu or Wubi . @ubuntu:~/sudo fdisk -l /dev/sda1 * 63 167782859 83891398+ 7 HPFS/NTFS/exFAT /dev/sda2 167782860 976768064 404492602+ 5 Extended /dev/sda5 167782923 284337032 58277055 7 HPFS/NTFS/exFAT /dev/sda6 587224008 669566016 41171004+ 7 HPFS/NTFS/exFAT /dev/sda7 284340224 587223039 151441408 83 Linux /dev/sda8 669569024 710529023 20480000 82 Linux swap / Solaris EDIT: I download proposed pack from issue 1.

  Read the article

• How to build a list from Postfix maillog

  - by dstonek

  I want to build a list from maillog, maillog.x containing something like Date, Sender's email, Recipient's Email and subject of the message filtering output emails and output domain. I've read about importing from spreadsheet program a cvs file. The issue is I have to add field separators in log file. I couldn't find how to customize that. How can I do that, the list and the separator? This is an example of sending mail log Jun 11 15:24:58 host postfix/cleanup[19060]: F41C660D98A0: warning: header Subject: TESTING SUBJECT from unknown[XXX.XXX.XXX.XXX]; [email protected] [email protected] proto=ESMTP helo=<[192.168.1.91] Jun 11 15:25:01 host postfix/smtp[19062]: F41C660D98A0: to=, relay=mx-rl.com[xxx.xxx.xxx.xxx]:25, delay=3.4, delays=0.66/0.01/0.86/1.9, dsn=2.0.0, status=sent (250 <538E30D9000A1DD8 Mail accepted) The list would contain the three bold fields filtering by to = [email protected]

  Read the article

• GPG and libpcap help

  - by Johnq

  I was trying to install the newest version of libpcap (as the version in the repositories doesn't seem current) and ran into the following problem. I copied the tcpdump-workers.asc text from the tcpdump website (which hosts libpcap as well) and imported the key to my keyring using gpg --import tcpdump-workers.asc. That when all well and fine but when I tried to verify the libpcap-1.4.0.tar.gz file against the key with gpg --verify, I ended up getting the message that unexpected data. was found. I am wondering if anyone else has run into this problem as the ancient technique of googling my problem has done little to answer my question.

  Read the article

• Instalar o Ubuntu / Install Ubuntu

  - by Joaquim Venâncio

  10:10 I installed Ubuntu alongside Windows 7, after the installation was able to upgrade to version 4.11. Now I'm trying to update to version 11.10 but I get an error message saying it is not possible to upgrade, I decided to install a partition that I created the part, but when I start the PC directly opens Windows 7 does not appear to me the option to choose which want to start the operating system. I formatted the partition where you had installed ubuntu, I've been looking for tutorials where you learn how to install ubuntu on a partition part to try to understand what my problem. I wonder if I can explain how to install ubuntu on a partition that part so that when I connect the PC to show me the option to choose which system I want to start.

  Read the article

• Login and redirect to user home page [migrated]

  - by Rich

  The problem I can't currently solve is when a user logs in. They arrive at the site (index.php) and enter username and password, which gets submitted via a Post form back to index.php - if there are incorrect details then they get an error message. But if successful then I would like them to be taken to their user home page - but I can't do this! I am left presenting them with a link to the home page, which is more than a little clunky. Seems there must be an obviously solution - never seen a site before that didn't redirect! Not sure is the answer is PHp, HTML, or Javascript.

  Read the article

• How do I do a B43 Legacy install on Ubuntu 11.10?

  - by Gozzy

  I recently installed ubuntu onto an extra hard drive and everything booted correctly. However, my Linksys wireless card is not working. I went though all the forums and walk throughs and I know that I need to install the b43 legacy firmware to get the card to work. When I try to install the files, I keep getting the message in Terminal saying "No such file or directory" for every file i need to run. It's Ubuntu 11.10 on a dell optiplex gx280. Also, the "pool" file that is supposed to be on the file system is not there

  Read the article

< Previous Page | 387 388 389 390 391 392 393 394 395 396 397 398  | Next Page >