Search Results

Search found 18842 results on 754 pages for 'machine'.

Page 420/754 | < Previous Page | 416 417 418 419 420 421 422 423 424 425 426 427  | Next Page >

  • ext4 jbd2 journaling active even on empty filesystem

    - by Paul
    I have been having several issues with my ext4 filesystems that seem to be due to jbd2 journaling. I made a related post here and am rephrasing it with the hope that someone may be able to help. For a minimal example, I start with an empty 8gb USB stick and use gparted to create one ext4 partition. The command used by gparted when creating the ext4 file system is: mkfs.ext4 -j -O extent -L DataTraveler8gb /dev/sde1 I check the filesystem with gparted: e2fsck -f -y -v /dev/sde1 and I mount it: sudo mount /dev/sde1 /media/test The disk is empty, but the journaling is very active on this disk (/dev/sde1). The other disks are ext4 SSDs formatted similarly. A snapshot of iotop: % sudo iotop -oPa Total DISK READ: 0.00 B/s | Total DISK WRITE: 2027.21 K/s PID PRIO USER DISK READ DISK WRITE SWAPIN IO COMMAND 262 be/3 root 0.00 B 56.00 K 0.00 % 0.18 % [jbd2/sda1-8] 29069 be/3 root 0.00 B 0.00 B 0.00 % 0.16 % [jbd2/sde1-8] 891 be/3 root 0.00 B 4.00 K 0.00 % 0.03 % [jbd2/sdc1-8] What is jbd2 doing with /dev/sde1? If I follow the same steps with a larger 2Tb disk, iotop indicates this empty disk is constantly being written to by jbd2 at the rate of Mb/s as soon as I mount it. On the other disks, which have the OS and /home, I have tried to find if any files are being modified by processes to cause this behavior but couldn't find any. I also moved many of the disk intensive process to use a tmpfs. And used noatime. I have another non-SSD hard disk on this machine, /dev/sdb, that is also ext4 but was not formatted by gparted (given to me by a coworker). It does not appear in iotop. So I am assuming there an issue with gparted. Any suggestions are appreciated. Also any tips on how to modify existing partitions to fix the issue without having to start from scratch would be great. There are some posts related to jbd2 but they didn't help (eg. here).

    Read the article

  • IP6tables blocks INPUT? can't connect with youtube API

    - by klaas
    I thought to have a simple ipv6 firewall, but it turned out to be hell. Somehow I really can't connect with any ipv6 from my machine unless I set INPUT Policy to ACCEPT. Below my current ip6tables ip6tables -L Chain INPUT (policy DROP) target prot opt source destination ACCEPT all anywhere anywhere state RELATED,ESTABLISHED ACCEPT ipv6-icmp anywhere anywhere ACCEPT tcp anywhere anywhere tcp dpt:http ACCEPT tcp anywhere anywhere tcp dpt:https Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination If I try to connect with any ipv6 adres it doesn't work? telnet gdata.youtube.com 80 Trying 2a00:1450:4013:c00::76... OR telnet gdata.youtube.com 443 Trying 2a00:1450:4013:c00::76... When I set: ip6tables -P INPUT ACCEPT It works.. but then.. well then everything is open? what is going on? Help?

    Read the article

  • Ethernet interface number changed, and old one does not exist, but does not leave IP address

    - by Sagar
    I have a virtual machine with Mandriva 2007.0 (yes, old - unfortunately we do not have a choice here). Anyway, the problem: Before reboot: active network interface = eth0. No other interfaces present, and network manager confirms this. Static IP address set to 172.31.2.22. No issues, everything working properly, routing et al. -------Reboot--------- After reboot: active network interface = eth1, with a DHCP address. Network manager shows eth0 as disconnected, and not connectable. When I try to set eth1 up with the static IP address (same one), it says "In Use". I then tried ifconfig eth0 172.31.2.29 just to free it up from the eth0 interface so I could use it with eth1 (since this is connected). Result: ifconfig eth0 172.31.2.29 SIOCSIFADDR: No such device eth0: unknown interface: No such device Nothing else changed. Any ideas what could be happening, or at least how I can get my IP address back?

    Read the article

  • How to stop Cairo Dock minimizing Conky on Show Desktop?

    - by César
    Every time I use Cairo Dock Show Desktop add-on Conky minimizes: I've read about the own_window_type override option on .conkyrc and it seems to work for some people but it doesn't work for me. Conky won't show up if I use this option (it is currently set to own_window_type normal). Any suggestions? .conkyrc # Conky settings # background no update_interval 1 cpu_avg_samples 2 net_avg_samples 2 override_utf8_locale yes double_buffer yes no_buffers yes text_buffer_size 2048 #imlib_cache_size 0 temperature_unit fahrenheit # Window specifications # own_window yes own_window_type normal own_window_transparent yes own_window_hints undecorate,sticky,skip_taskbar,skip_pager,below border_inner_margin 0 border_outer_margin 0 minimum_size 200 250 maximum_width 200 alignment tr gap_x 35 gap_y 55 # Graphics settings # draw_shades no draw_outline no draw_borders no draw_graph_borders no # Text settings # use_xft yes override_utf8_locale yes xftfont Neuropolitical:size=8 xftalpha 0.8 uppercase no temperature_unit celsius default_color FFFFFF # Lua Load # lua_load ~/.lua/scripts/clock_rings.lua lua_draw_hook_pre clock_rings TEXT ${font Neuropolitical:size=42}${time %e} ${goto 100}${font Neuropolitical:size=18}${color FF3300}${voffset -75}${time %b} ${font Neuropolitical:size=10}${color FF3300}${voffset 15}${time %A}${color FF3300}${hr} ${goto 100}${font Neuropolitical:size=15}${color FFFFFF}${voffset -35}${time %Y} ${font Neuropolitical:size=30}${voffset 40}${alignc}${time %H}:${time %M} ${goto 175}${voffset -30}${font Neuropolitical:size=10}${time %S} ${voffset 10}${font Neuropolitical:size=11}${color FF3300}${alignr}HOME${font} ${font Neuropolitical:size=13}${color FFFFFF}${alignr}temp: ${weather http://weather.noaa.gov/pub/data/observations/metar/stations/ LQBK temperature temperature 30} °C${font} ${hr} ${image ~/.conky/logo.png -p 165,10 -s 35x35} ${color FFFFFF}${font Neuropolitical:size=8}Uptime: ${uptime_short} ${color FFFFFF}${font Neuropolitical:size=8}Processes: ${processes} ${color FFFFFF}${font Neuropolitical:size=8}Running: ${running_processes} ${color FF3300}${goto 125}${voffset 27}CPU ${color FFFFFF}${goto 125}${cpu cpu0}% ${color FF3300}${goto 125}${voffset 55}RAM ${color FFFFFF}${goto 125}${memperc}% ${color FF3300}${goto 125}${voffset 56}Swap ${color FFFFFF}${goto 125}${swapperc}% ${color FF3300}${goto 125}${voffset 57}Disk ${color FFFFFF}${goto 125}${fs_used_perc /}% ${color FF3300}${goto 130}${voffset 55}Net ${color FFFFFF}${goto 130}${downspeed eth0} ${color FFFFFF}${goto 130}${upspeed eth0} ${color FF3300}${font Neuropolitical:size=8}${alignr}${nodename} ${color FF3300}${font Neuropolitical:size=8}${alignr}${pre_exec cat /etc/issue.net} $machine ${color FF3300}${font Neuropolitical:size=8}${alignr}Kernel: ${kernel} ${hr}

    Read the article

  • MSCC: Purpose and benefits of Version Control Systems (VCS)

    You're working in IT and not using any kind of version control system? Sorry, then you're doing something wrong! RSVP for MSCC meetup of June This month's meetup will be an introduction into the mechanics of version control systems (VCS) like git, Mercurial, TFS, and others in general. VCS are not optional but compulsory in any area of IT. Whether you're developing source code for the next buzz app, writing SQL scripts for your database, or automating your administrative tasks with shell scripts it's better to have a "time machine" in order to keep multiple version, stay organised and leverage the power of differences. git - a modern approach to VCS - Nayar Nayar is going to give us a brief overview of the basic principles of working with git. Which are the necessary steps to get started and which are the usual commands in order to get the most out of git. Visual Studio Online (VSO) - Jochen Are you mainly rooted on the Windows platform and looking for a good alternative to Team Foundation Services (TFS), then VSO might give you hand at achieving this. Similar to git VSO is an open infrastructure but plays very well together with the Microsoft Azure cloud infrastructure. Recent and upcoming events in Mauritius Let's have a chat about recent events like WebCup 2014 or Emtel Knowledge Series and have a head start on upcoming events like Code Challenge, and others to come. Networking and general discussions Of course, there will be plenty of time to chat and exchange with other like-minded craftsmen. Bring your topics and discuss various issues with other professionals. Share your experience and use the ability to learn from others. Looking forward to meet soon.

    Read the article

  • SQL SERVER – Fix: Error: Compatibility Level Drop Down is Empty

    - by Pinal Dave
    I currently have SQL Server 2012 and SQL Server 2014 both installed on the same machine. My job requires me to travel a lot and I like to travel light. Hence, I have only one computer with all the software installed in it. I can install Virtual Machines but as I was able to install SQL Server 2012 and SQL Server 2014 side by side, I just went ahead with that option. Now one day when I opened up my SQL Server 2014 and went to the properties of the my database, I realized that the dropdown box for Compatibility level is empty. I just can’t select anything there or see what is the current Compatibility level of the database. This was the first time for me so I was bit confused and I tried to search online. Upon searching online I realize that if I was not the first, there are very few questions on this subject on various forums as well as there is no convincing answer to this problem online. That means, I was pretty much first one to face this error. See the image of the situation I was facing. Now I decided to resolve this issue as soon as I can. I spent a few minutes here and there and realize my mistake. I had connected to SQL Server 2014 instance from SQL Server 2012 Management Studio. Hence, I was not able to see any compatibility related settings. Once I connected to SQL Server 2014 instance with SQL Server 2014 Management Studio – this issue was resolved. Well, simple things sometimes keep us very busy. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Error Messages, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

    Read the article

  • How to list my harddrives in OpenSolaris?

    - by Sanoj
    I have a machine with two harddrives. I have installed OpenSolaris on one of them and now I want to add the other one as a mirror-drive in my zpool. But to do that I have to know the name of my drive, something like c7d0s0. Using the command zpool status can I see the harddrives already in use in my zpool but not the hard-drives that are not in use. How can I list the names of the hard-drives that are not in use in any zpool or list the name of all my hard-drives?

    Read the article

  • A client wants us to screen work machines for pornography. Is it possible?

    - by Scant Roger
    A long-time client has asked us to help screen their work machines for pornography. They're worried about liability if sensitive materials were found. Their main concerns (for obvious reasons) are video, audio, and image files. If possible, they'd also like to scan text-based documents for inappropriate content. They have a hierarchy of not-for-work content starting with blatantly illegal (I don't have to list details), moving down to obviously offensive, and also including things that may be offensive to some - think lingerie ads, joke cards featuring butt cracks, and anything related to Howie Mandel. My questions are: Is this ethical? I think it is since every employee legally agrees that their work machine belongs to the company and is subject to search. The screenings are not to occur on personal machines brought to work. Is it feasible? I've done a lot of image processing/indexing but this seems like a whole new world of complexity. Any references to successful techniques for discovering porn? Is it appropriate for me to archive the results when something is discovered?

    Read the article

  • How do you configure Perl CPAN in Solaris?

    - by Casey
    I can't seem to get CPAN installs working on a Solaris machine. Here is my current output. ~# perl -MCPAN -eshell Terminal does not support AddHistory. cpan shell -- CPAN exploration and modules installation (v1.7601) ReadLine support available (try 'install Bundle::CPAN') cpan> install Bundle::LWP CPAN: Storable loaded ok LWP not available CPAN: Net::FTP loaded ok Fetching with Net::FTP: ftp://ftp.dti.ad.jp/pub/lang/CPAN/authors/01mailrc.txt.gz Couldn't fetch 01mailrc.txt.gz from ftp.dti.ad.jp ... ... This output is repeated for every mirror. Any ideas why this doesn't work?

    Read the article

  • Problems with mailenable when sending to yahoo mail

    - by Mee
    I'm testing sending emails from mailenable webmail. I have no problems sending mail to gmail or hotmail, both work fine, but yahoo mail sends my messages to the spam folder and shows the attachment icon for the message even though the message doesn't contain any attachments, it's just plain text. It only includes a reply to a previous message, like this: message text ----- Original Message ----- original message text I copied the message content and sent it from gmail to yahoo and the attachment icon didn't show which makes me believe it's something with mailenable. What could possibly be wrong? Also, is there a white list for yahoo mail that I can join? And also for other popular webmail? I'm going to use this on a production website (site visitors use the contact us form to send messages to the site - the mail enable server running on the same machine as the web server - then I check the messages using the mailenable webmail and reply them). This is really important to me, your help would be really appreciated ...

    Read the article

  • Blocking RDP connections from secondary IP addresses

    - by user73995
    Hi, I have a webserver running Windows 2008 R2 with multiple IPs assigned to it. I want to be able to RDP to the box via the main IP assigned to the box but not from any of the secondary IPs (ie... the websites IPs). I assume if I had control of the Firewall I could shut off the RDP port to the secondary IPs but it's in a hosted environment and I don't have access to the firewall. I'll contact the host to see if that's available but was hoping there was a setting I could set on the machine itself to not resolve RDP requests from the additional IPs. Any advice?

    Read the article

  • Wireless Access Point - Can't ping other machines on the wireless network

    - by Surfer513
    I have a wireless access point (Netgear), and I have it setup so that it has an IP address in the current subnet (let's say 192.168.2.0, subnet mask of 255.255.255.0). The machine that it is connected to via ethernet cable has an IP in the same subnet as the AP. The machines that are connected to the AP via the wireless connection also have an IP address in the same subnet as the rest of the network (192.168.2.0). All machines can ping the access point, but they cannot ping each other. I don't totally understand why, because there is connection and all of the machines are in the same subnet. I realize this is a layer 3 device, but is there an issue because of this AP's lack of gateway capabilities? (i.e. no routing table, etc.)

    Read the article

  • Linksys Router/Tomato Firmware DNS issues

    - by jasonh
    I've got a WRT54GS that I've loaded the current version of Tomato onto. I entered static DHCP addresses in for the devices on my network, released and renewed the address on my desktop and tried to ping another computer. All I got was The request could not find host blah. Please check the name and try again. Now, I verified that my desktop and the target machine I'm trying to ping have both received their proper static DHCP lease and that their DNS server is the IP address of my router. What am I missing?

    Read the article

  • How to config DLink DSL-2640T to allow access from DynDNS route to specific port on my PC?

    - by Greendog
    Hi, everyone. I think you can help me out from this little problem. I am trying to setup an Apache web server on my PC and let the other remotes to this machine via DynDNS.com. I found that DLink DSL-2640T make me confuse about how to configure the routing from http://myhostname.dyndns.org:80 to 192.168.1.13:80. At the moment when I browse the URL http://myhostname.dyndns.org, it will lead me to router's admin control panel. Could you help me out by giving your guideline or suggestion?

    Read the article

  • Cygwin Python and Windows Ruby

    - by Cheezo
    I have a peculiar setup as follows: I have cygwin installed on a Windows 7 machine. I need execute a python script setup in cygwin from the windows CLI. This works fine : c:\cygwin\bin\python2.6.exe c:\cygwin\bin\python-script This python-script accesses a file: ~/.some_config_file which translates to /home/user-name when i execute it from Windows as above. So this works as expected. Now, the next step is to execute this python script from ruby(which is setup on Windows natively w/o Cygwin). When i execute the script from ruby, the ~/.some_config_file translates to /cygdrive/c/Users/user-name instead of the expected /home/user-name leading to the script failing. I understand that something in the environment, PATH etc needs to be set correctly although i cannot seem to find what exactly.

    Read the article

  • Symmetrix gatekeepers on Solaris 10

    - by Milner
    I have some Solaris machines that are connected to EMC Symmetrix for SAN storage. Apparently the Symm has a gatekeeper device that is used with the symmetrix CLI. We don't need the CLI, but I have these gatekeeper devices that constantly fill /var/adm/messages and the like with corrupt label errors. Is there anything I can do (short of deleting the devices on machine start) to get rid of them? Or should I just try to get our SAN guy to get the installer for the CLI? These things are getting annoying, and the devfsadmd daemon keeps rediscovering them on boot.

    Read the article

  • Resizing an iscsi LUN on an EMC under Linux RHEL 5

    - by niXar
    I expanded a LUN on my SAN (from 30G to 50G), and tried all kind of voodoo but it looks like the system still believes the device is still small, despite showing me the new size alright. # blockdev --getsize64 /dev/sdl 53687091200 # dd if=/dev/sdl skip=$(( 31*1024*1024*1024/512 )) count=1|hexdump -C dd: reading `/dev/sdl': Input/output error The dd line works for blocks below the 30G original size. If I reboot, the problem goes away, but I don't want to since the machine has a dozen VMs running. I tried various magic, such as: iscsiadm -m node -R -I iface0 ... to no avail. Note: I'm not using multipath.

    Read the article

  • Error 0x8007007e When trying to mount WinPE 5 wim in Windows 7 using Powershell

    - by BigHomie
    Using ADK for Windows 8.1, and the DISM cmdlets that come with them. I have WMF 4.0 installed. My machine is Windows 7 x64 SP1, and I'm trying to mount the wim using PS C:\Users\BigHomie> Mount-WindowsImage -ImagePath 'C:\Program Files (x86)\Windows Kits\8.1\Assessment and Deployment Kit\Windows Preinstallation Environment\x86\ en-us\winpe.wim' -Path C:\WinPE_x86 -index 1 And receive the following error: Mount-WindowsImage : DismInitialize failed. Error code = 0x8007007e At line:1 char:1 + Mount-WindowsImage -ImagePath 'C:\Program Files (x86)\Windows Kits\8.1\Assessmen ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~ + CategoryInfo : NotSpecified: (:) [Mount-WindowsImage], COMExcep tion + FullyQualifiedErrorId : Microsoft.Dism.Commands.MountWindowsImageCommand Using dism.exe works fine. Update Forgetting I had this problem, I went to mount a wim using the Powershell ISE and actuallygot a visual error message about "C:\Program Files (x86)\Windows Kits\8.1\Assessment and Deployment Kit\Deployment Tools\x86\DISM\api-ms-win-downlevel-advapi32-l4-1-0.dll" not being installed. After checking that the dll did in fact exist in the folder I called regsvr32 and received another error message Will try reinstalling as recommended.

    Read the article

  • If Nvidia Shield can stream a game via WiFi (~150-300Mbps), where is the 1-10Gbps wired streaming?

    - by Enigma
    Facts: It is surprising and uncharacteristic that a wireless game streaming solution is the *first to hit the market when a 1000mbps+ Ethernet connection would accomplish the same feat with roughly 6x the available bandwidth. 150-300mbps WiFi is in no way superior to a 1000mbps+ LAN connection aside from well wireless mobility. Throughout time, (since the internet was created) wired services have **always come first yet in this particular case, the opposite seems to be true. We had wired internet first, wired audio streaming, and wired video streaming all before their wireless counterparts. Why? Largely because the wireless bandwidth was and is inferior. Even today despite being significantly better and capable of a lot more, it is still inferior to a wired connection. Situation: Chief among these is that NVIDIA’s Shield handheld game console will be getting a microconsole-like mode, dubbed “Shield Console Mode”, that will allow the handheld to be converted into a more traditional TV-connected console. In console mode Shield can be controlled with a Bluetooth controller, and in accordance with the higher resolution of TVs will accept 1080p game streaming from a suitably equipped PC, versus 720p in handheld mode. With that said 1080p streaming will require additional bandwidth, and while 720p can be done over WiFi NVIDIA will be requiring a hardline GigE connection for 1080p streaming (note that Shield doesn’t have Ethernet, so this is presumably being done over USB). Streaming aside, in console mode Shield will also support its traditional local gaming/application functionality. - http://www.anandtech.com/show/7435/nvidia-consolidates-game-streaming-tech-under-gamestream-brand-announces-shield-console-mode ^ This is not acceptable to me for a number of reasons not to mention the ridiculousness of having a little screen+controller unit sitting there while using a secondary controller and screen instead. That kind of redundant absurdity exemplifies how wrong of a solution that is. They need a second product for this solution without the screen or controller for it to make sense... at which point your just buying a little computer that does what most other larger computers do better. While this secondary project will provide a wired connection, it still shouldn't be necessary to purchase a Shield to have this benefit. Not only this but Intel's WiDi claims game streaming support as well - wirelessly. Where is the wired streaming? All that is required, by my understanding, is the ability to decode H.264 video compression and transmit control/feedback so by any logical comparison, one (Nvidia especially) should have no difficulty in creating an application for PC's (win32/64 environment) that does the exact same thing their android app does. I have 2 video cards capable of streaming (encoding) H.264 so by right they must be capable of decoding it I would think. I should be able to stream to my second desktop or my laptop both of which by hardware comparison are superior to the Shield. I haven't found anything stating plans to allow non-shield owners to do this. Can a third party create this software or does it hinge on some limitation that only Nvidia can overcome? Reiteration of questions: Is there a technical reason (non marketing) for why Nvidia opted to bottleneck the streaming service with a wireless connection limiting the resolution to 720p and introducing intermittent video choppiness when on a wired connection one could achieve, presumably, 1080p with significantly less or zero choppiness? Is there anything limiting developers from creating a PC/Desktop application emulating the same H.264 decoding functionality that circumvents the need to get an Nvidia Shield altogether? (It is not a matter of being too cheap to support Nvidia - I have many Nvidia cards that aren't being used. One should not have to purchase specialty hardware when = hardware already exists) Same questions go for Intel Widi also. I am just utterly perplexed that there are wireless live streaming solution and yet no wired. How on earth can wireless be the goto transmission medium? Is there another solution that takes advantage of H.264 video compression allowing live streaming over a wired connection? (*) - Perhaps this isn't the first but afaik it is the first complete package. (**) - I cant back that up with hard evidence/links but someone probably could. Edit: Maybe this will be the solution I am looking for but I still find it hard to believe that they would be the first and after wireless solutions already exist. In-home Streaming You can play all your Windows and Mac games on your SteamOS machine, too. Just turn on your existing computer and run Steam as you always have - then your SteamOS machine can stream those games over your home network straight to your TV! - http://store.steampowered.com/livingroom/SteamOS/

    Read the article

  • Using old code on new version of Visual Studio [migrated]

    - by Tu Tran
    I have a project which was started from 90s in C/C++. Therefore, it contains many old coding styles such as K&R-style function declaration, obsolete function, ... The project works fine in Visual Studio 2008, but now I want to use it in the new version of Visual Studio (specifically VS 2010) because we have other projects in Visual Studio 2010/2012. I don't want to have too many versions of Visual Studio on my machine. When I try to compile the old project, Visual Studio throws too many errors. I can fix all of them but I am scared to edit the source code and I want other people to be able to pen it in the old version of VS too. I want the project to remain backwards compatible with VS. My question is how to use the old code in Visual Studio 2010/2012 without changing the code. Or if necessary how do I just fix a few lines of code, but make sure it won't cause an error if someone else opens that code in the older version of VS. Is there a way to tell newer Visual Studio versions to use older compiler flags or something like that?

    Read the article

  • Creating Java Neural Networks

    - by Tori Wieldt
    A new article on OTN/Java, titled “Neural Networks on the NetBeans Platform,” by Zoran Sevarac, reports on Neuroph Studio, an open source Java neural network development environment built on top of the NetBeans Platform. This article shows how to create Java neural networks for classification.From the article:“Neural networks are artificial intelligence (machine learning technology) suitable for ill-defined problems, such as recognition, prediction, classification, and control. This article shows how to create some Java neural networks for classification. Note that Neuroph Studio also has support for image recognition, text character recognition, and handwritten letter recognition...”“Neuroph Studio is a Java neural network development environment built on top of the NetBeans Platform and Neuroph Framework. It is an IDE-like environment customized for neural network development. Neuroph Studio is a GUI that sits on top of Neuroph Framework. Neuroph Framework is a full-featured Java framework that provides classes for building neural networks…”The author, Zoran Sevarac, is a teaching assistant at Belgrade University, Department for Software Engineering, and a researcher at the Laboratory for Artificial Intelligence at Belgrade University. He is also a member of GOAI Research Network. Through his research, he has been working on the development of a Java neural network framework, which was released as the open source project Neuroph.Brainy stuff. Read the article here.

    Read the article

  • "Breadcrumbs" for series of hostnames?

    - by Hamy
    Does anyone know of a shell that would show a series of breadcrumbs as I navigate into/out of various servers, like this: Home > Build Machine > Vagrant > Docker-base Hopefully it could auto-detect logging in and out of various boxes and display the hostnames. Perhaps with a simple "no circular links", one could just try and monitor the hostname, but I don't know if there is a shell that can easily act as a 'parent' to the other shells on these various systems so that it can query hostname and/or other item. Any thoughts?

    Read the article

  • Bind9 as a caching resolver fails with mismatch ID on localhost but not external IP

    - by argibbs
    I'm running Ubuntu 12.04 LTS on a machine on my private network. I have bind9 installed (v9.8.1-P1) via aptitude, so it appears to have put all the bits in the right places and the service starts automatically. I plan on adding some zones later, but first I'm just trying to get it working as a caching resolver. I installed bind, configured it, and starting using it. Initially I thought it was working ok, but then I found some sites weren't being resolved. I've pinned it down to being linked to the size of the result and bind failing-over to TCP mode. So: I'm trying to find out why bind is failing when I query for domain info and the result is 512 bytes (causing a truncation and retry on TCP). Specifically it fails with ID mismatches if I point dig at localhost, but works when I query the machine's own IP (192.168.0.2). This appears to be backwards to the problem that most people have when using bind (fails on external ip, works on localhost). If I do dig @localhost google.com (which has a response of <512 bytes) then it works; I get no warnings, and plenty of output. $ dig @localhost google.com ; <<>> DiG 9.8.1-P1 <<>> @localhost google.com [snip lots of output] ;; Query time: 39 msec ;; SERVER: 127.0.0.1#53(127.0.0.1) ;; WHEN: Thu Oct 17 23:08:34 2013 ;; MSG SIZE rcvd: 495 If I do dig @localhost play.google.com (which has a larger response) then I get back something like: $ dig @localhost play.google.com ;; Truncated, retrying in TCP mode. ;; ERROR: ID mismatch: expected ID 3696, got 27130 This seems to be standard, documented behaviour - when the UDP response is large (here 'large' == 512 bytes) it falls back to TCP. The ID mismatch is not expected though. If I do dig @192.168.0.2 play.google.com then I still get the warning about using TCP mode, but it otherwise works $ dig @192.168.0.2 play.google.com ;; Truncated, retrying in TCP mode. ; <<>> DiG 9.8.1-P1 <<>> @192.168.0.2 play.google.com [snip most of the output] ;; Query time: 5 msec ;; SERVER: 192.168.0.2#53(192.168.0.2) ;; WHEN: Thu Oct 17 23:05:55 2013 ;; MSG SIZE rcvd: 521 At the moment I've not set up any zones in my local instance, so it's just acting as a caching resolver. My options config is pretty much unchanged from standard, I've got the following set: options { directory "/var/cache/bind"; allow-query { 192.168/16; 127.0.0.1; }; forwarders { 8.8.8.8; 8.8.4.4; }; dnssec-validation auto; edns-udp-size 4096 ; allow-transfer { any; }; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; And my /etc/resolv.conf is just nameserver 127.0.0.1 search .local The problem definitely seems linked to the failover to TCP mode: if I do dig +bufsize=4096 @localhost play.google.com then it works; no warning about failover to TCP, no ID mismatch, and a standard looking result. To be honest, if there was a way to force bind to use a much larger UDP buffer, that'd probably be good enough for me, but all I've been able to find mention of is max-udp-size 4096 and that doesn't change the behaviour in any way. I've also tried setting edns-udp-size 512 in case the problem is some weird EDNS issue with my router (which seems unlikely since the +bufsize=4096 flag works fine). I've also tried dig +trace @localhost play.google.com; this works. No truncation/TCP warning, and a full result. I've also tried changing the servers used in the forwarder (e.g. to OpenDNS), but that makes no difference. There's one last data point: if I repetitively do dig @localhost play.google.com I don't always get an ID mismatch, but sometimes a REFUSED error. I'm much more likely to get a REFUSED error if I dig the non-localhost IP (192.168.0.2) first: $ dig @localhost play.google.com ;; Truncated, retrying in TCP mode. ; <<>> DiG 9.8.1-P1 <<>> @localhost play.google.com ; (1 server found) ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: REFUSED, id: 35104 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;play.google.com. IN A ;; Query time: 4 msec ;; SERVER: 127.0.0.1#53(127.0.0.1) ;; WHEN: Thu Oct 17 23:20:13 2013 ;; MSG SIZE rcvd: 33 Any insights or things to try would be much appreciated.

    Read the article

  • CUPS basic auth error through web interface

    - by Inaimathi
    I'm trying to configure CUPS to allow remote administration through the web interface. There's enough documentation out there that I can figure out what to change in my cupsd.conf (changing Listen localhost:631 to Port 631, and adding Allow @LOCAL to the /, /admin and /admin/conf sections). I'm now at the point where I can see the CUPS interface from another machine on the same network. The trouble is, when I try to Add Printer, I'm asked for a username and password, but my response is rejected even when I know I've gotten it right (I assume it's asking for the username and password of someone in the lpadmin group on the server machine; I've sshed in with credentials its rejecting, and the user I'm using has been added to the lpadmin group). If I disable auth outright, by changing DefaultAuthType Basic to DefaultAuthType None, I get an "Unauthorized" error instead of a password request when I try to Add Printer. What am I doing wrong? Is there a way of letting users from the local network to administer the print server through the CUPS web interface? EDIT: By request, my complete cupsd.conf (spoiler: minimally edited default config file that comes with the edition of CUPS from the Debian wheezy repos): LogLevel warn MaxLogSize 0 SystemGroup lpadmin Port 631 # Listen localhost:631 Listen /var/run/cups/cups.sock Browsing On BrowseOrder allow,deny BrowseAllow all BrowseLocalProtocols CUPS dnssd # DefaultAuthType Basic DefaultAuthType None WebInterface Yes <Location /> Order allow,deny Allow @LOCAL </Location> <Location /admin> Order allow,deny Allow @LOCAL </Location> <Location /admin/conf> AuthType Default Require user @SYSTEM Order allow,deny Allow @LOCAL </Location> # Set the default printer/job policies... <Policy default> # Job/subscription privacy... JobPrivateAccess default JobPrivateValues default SubscriptionPrivateAccess default SubscriptionPrivateValues default # Job-related operations must be done by the owner or an administrator... <Limit Create-Job Print-Job Print-URI Validate-Job> Order deny,allow </Limit> <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document> Require user @OWNER @SYSTEM Order deny,allow </Limit> # All administration operations require an administrator to authenticate... <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default CUPS-Get-Devices> AuthType Default Require user @SYSTEM Order deny,allow </Limit> # All printer operations require a printer operator to authenticate... <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs> AuthType Default Require user @SYSTEM Order deny,allow </Limit> # Only the owner or an administrator can cancel or authenticate a job... <Limit Cancel-Job CUPS-Authenticate-Job> Require user @OWNER @SYSTEM Order deny,allow </Limit> <Limit All> Order deny,allow </Limit> </Policy> # Set the authenticated printer/job policies... <Policy authenticated> # Job/subscription privacy... JobPrivateAccess default JobPrivateValues default SubscriptionPrivateAccess default SubscriptionPrivateValues default # Job-related operations must be done by the owner or an administrator... <Limit Create-Job Print-Job Print-URI Validate-Job> AuthType Default Order deny,allow </Limit> <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document> AuthType Default Require user @OWNER @SYSTEM Order deny,allow </Limit> # All administration operations require an administrator to authenticate... <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default> AuthType Default Require user @SYSTEM Order deny,allow </Limit> # All printer operations require a printer operator to authenticate... <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs> AuthType Default Require user @SYSTEM Order deny,allow </Limit> # Only the owner or an administrator can cancel or authenticate a job... <Limit Cancel-Job CUPS-Authenticate-Job> AuthType Default Require user @OWNER @SYSTEM Order deny,allow </Limit> <Limit All> Order deny,allow </Limit> </Policy>

    Read the article

  • Can't find instructions how to use Windows 7 drivers on Windows Server 2008 R2

    - by Robert Koritnik
    Windows 7 x64 comes with all sorts of signed drivers so there's high probability that all drivers for your machine will be installed during system setup. On the other hand Windows Server 2008 R2 doesn't. Event though it's practically the same OS when it comes to drivers. I know there's a very good reason for this difference. It's a server product, not a desktop one. But the thing is that many power users and developers use server OS on their workstations which are usually desktop machines (a bit more powerful though) and would benefit from the whole driver spectrum that Windows 7 offers... Question I know I've been reading on the internet about some trick where you first install Windows 7, than do something to get either all Windows 7 drivers or just those installed, and then install Windows Server 2008 R2 and use those drivers of Windows 7. The thing is I can't find these instructions on the internet any more. If anybody knows where they are please provide the link for the rest of us.

    Read the article

< Previous Page | 416 417 418 419 420 421 422 423 424 425 426 427  | Next Page >