Search Results

Search found 91854 results on 3675 pages for 'server hardware'.

Page 429/3675 | < Previous Page | 425 426 427 428 429 430 431 432 433 434 435 436  | Next Page >

  • (Arch)Linux board with dual ethernet

    - by tekknolagi
    I am looking for a Linux board with the following requirements: 2 ethernet ports (helpful, but only 1 required) 2 USB ports SDXC support (for SD/MicroSD) WiFi (25 concurrent users ideally) HDMI or micro HDMI out I don't know of a good way to find boards. I went through and catalogued a bunch in a spreadsheet, though: https://docs.google.com/spreadsheets/d/1ZyWvg1u5jAeCq4ghpQv3fukl78nYO64utfQgzTP1r7w/edit?usp=sharing

    Read the article

  • Compaq Presario CQ40 unexpected turn off

    - by CRoshanLG
    My Compaq Presario CQ40 (yeah, its pretty old) suddenly turns off after about 1/2 - 1 hour usage without any notice or warning. The power cable and adapter works fine (indicator bulbs show that power is given to the laptop), but it seems like machine suddenly plugged off from the power source. And when I try to switch it on, after the sudden turn off it simply won't turn on. I can only turn it on after letting it to rest for at least couple of hours! ** The battery has been dead for some time now, but it has been working fine on direct power supply until recently. Has anyone encountered this? and hopefully knows any cure?

    Read the article

  • XP Restart After Power Failure

    - by Jim
    Hello, I've almost got my power settings sorted and was hoping someone could help? If I'm running XP and the power is cut, when the power is restored my machine auto restarts (this is what I want!) However, if I shutdown my machine properly (from the start menu & without touching the PC power button!), then switch the power off at the socket, then switch the power back on, the PC does not automatically restart. It's like the bios(?) recieives a message saying "aha, genuine shutdown and not a power cut, therefore do not restart on power restore." I want my PC to restart everytime it sees power restored from the socket? Any way round this? Anyone seen this before? I've upgraded my bios. Thanks in advance, Jim

    Read the article

  • Weird DNS bug - external server resolves to internal IP

    - by emilecantin
    I have a server that is hosted by my university. I have root access, but no control over network setup, firewall, etc. This server's DNS resolves to an internal IP here on campus (10.x.x.x), and an external IP outside campus. I also have a few servers hosted at Amazon, and they mostly work well. However, one of them started to resolve the university server by its internal IP address. This causes problems, as 10.x.x.x on Amazon EC2 is someone else. I have connected to the Amazon server with SSH agent forwarding a few times in the past, to access a Git repository on the university server. Any idea what could cause this? EDIT: Here's my /etc/resolv.conf # Generated by dhcpcd for interface eth0 search ec2.internal nameserver 172.16.0.23 Here's the output of dig myserver.myuniversity.ca.: ; <<>> DiG 9.8.1-P1 <<>> myserver.myuniversity.ca. ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 34470 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;myserver.myuniversity.ca. IN A ;; ANSWER SECTION: myserver.myuniversity.ca. 537586 IN A 10.43.x.x ;; Query time: 2 msec ;; SERVER: 172.16.0.23#53(172.16.0.23) ;; WHEN: Wed Nov 28 16:07:21 2012 ;; MSG SIZE rcvd: 60 Here's the expected output (on another Amazon server): ; <<>> DiG 9.8.1-P1 <<>> myserver.myuniversity.ca. ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 8045 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;myserver.myuniversity.ca. IN A ;; ANSWER SECTION: myserver.myuniversity.ca. 601733 IN A x.x.239.1 ;; Query time: 1 msec ;; SERVER: 172.16.0.23#53(172.16.0.23) ;; WHEN: Wed Nov 28 16:09:36 2012 ;; MSG SIZE rcvd: 60

    Read the article

  • Mouse for a lefty?

    - by Kyralessa
    As a programmer, I'm fairly particular about my keyboard and mouse. One thing I've only recently noticed is that the mice I tend to prefer don't work well for my five-year-old. He's left-handed, but ends up mousing with his right hand on the computer because (a) that's where the mouse is, and (b) most mice are designed for right-handed people anyway. So, a couple of questions: If you're left-handed and you mouse with your left hand, do you have any recommendations on good mice? If you have a lefty in your household (whether or not it's you), is there an easy way to swap settings between left-handed and right-handed mouse buttons? One way is Control Panel Mouse Check the box on the first tab OK. Do you know of anything faster? Or, better yet, what I'd really like is a way to reverse those settings on only one particular mouse, which would be designated as my son's mouse.

    Read the article

  • is my touchpad dying? Gentoo Linux

    - by Walter White
    Hi all, My touchpad on my laptop appears to be no longer functioning. I typically use an external keyboard and mouse so I didn't notice the problem until I tried to use the touchpad. Even after toggling the on/off switch several times, the touchpad still doesn't work. In the logs, I see something about cannot read byte from synaptics device. I will post the full logs when I am in front of my machine. Thanks, Walter

    Read the article

  • Restore single users Exchange 2003 mailbox from backup

    - by Campo
    I take weekly backups of exchange in full. I also take complete weekly backups of the entire server. It is a Server 2003 R2 with AD and Exchange 2003 all on one box. One users inbox has disappeared. She has 19000+ junk items now. It is possible the inbox got mixed into the junk. Regardless it is such a huge mess she is not going to go through all of that.... I want to restore he mailbox from the backup. I followed this MS KB http://support.microsoft.com/kb/823176 I had to use Method 3. I have a VM of Server 2003 R2 with exchange but I am having failures on the restore from NT backup. The backup log just states to check the application log.... Application log points to backup log... Only info Is failed to restore Only thing different is the computer name... The only error I can find is in the Application log. Information Store Database not found All others just say that the backup failed. Any assistance is greatly appreciated. UPDATE I have successfully proven I can restore the DB into a recovery storage group in my VM Unfortunately due to the actual account being on a different store I am unable to do the recovery... Error is The attempt to log on to the Microsoft Exchange Server computer has failed. The MAPI provider failed. Microsoft Exchange Server Information Store ID no: 8004011d-0512-00000000 Two questions QUESTION 1 Should I repeat my steps on the production exchange server in the recover storage group? then merge into her original account? I am just concerned with doing recovery like that on the live server.... QUESTION 2 Is there any way I can extract her .PST from my recovery VM and then import into her outlook? On the Recovery VM: I restored the raw DB from my full backup repaired it with ESEUTIL then mounted in the recovery store. Was thinking I could just repeat and mount in the main store on the VM? Thanks for the suggestions.

    Read the article

  • What would make a noise in a PC on graphics operations on a passively-cooled system?

    - by T.J. Crowder
    I have this system based on the Intel D510MO motherboard, which is basically an Atom D510 (dual-core HT Atom w/built-in GPU), an Intel NM10 chipset, and a Realtek Gigabit LAN controller. It's entirely passively cooled. I noticed almost immediately that there was a kind of very, very soft noise that corresponded with graphics operations, sort of the noise you'd get if you had a sheet of flat paper and slid something really light across it — but more electronic than that. I wrote it off as observation error and/or disk activity triggered by the graphics operation (although the latter seemed like a lot of unnecessary disk activity). It isn't. I got curious enough that I finally did a few controlled experiments, and here's what I've determined: It isn't the HDD. For one thing, the sounds the HDD makes (when seeking, when reading or writing, when just sitting there spinning) is different. For another, I used sudo hdparm -y /dev/sda (I'm using Ubuntu 10.04 LTS) to temporarily put the disk on standby while making sure that non-disk graphics op was happening in a loop. The disk spun down, but the other sound continued, corresponding perfectly with the timing of the graphics op. (Then the disk spun up again, but it takes long enough that I could rule out the HDD.) It isn't the monitor; I ensured the two were well physically-separated and the sound was definitely coming from the main box. It isn't something else in the room; the sound is coming from the box. It isn't cross-talk to an audio circuit coming out the speakers. (It doesn't have any speakers.) It isn't my mouse (e.g., when I'm trying to make graphics ops happen); the sound happens if I set up a recurring operation and don't use the mouse at all, or if I lift the mouse off the table slightly (but enough that the laser still registers movement). It isn't the voices in my head; they never whisper like that. Other observations: It doesn't seem to matter what the graphics operation is; anything that changes what's on the screen seems to do it. I get the sound when moving the mouse over the Chromium tab bar (which makes the tab backgrounds change); I get it when a web page has a counter on it that changes the text on the page: I get it when dragging window contents around. The sound is very, very slightly louder if the graphics op is larger, like scrolling a text area when writing a question on superuser.com, than for smaller operations like the tick counter on the web page. But it's very slight. It's fairly loud (and of good duration) when the op involves color changes to substantial surface areas. For instance, when asking a question here on superuser and you move the cursor between the question box and the tag box, and the help to the right fades out, changes, and fades back in. (Yet another example related to the web browser, so let me say: I hear it when operations completely unrelated to the web browser as well.) It doesn't sound like arcing or anything like that (I'd've shut off the machine Right Quick Like if it did). Moving windows does it. Scrolling windows (by and large) doesn't. I have the feeling I've heard this sort of thing before, when all system fans were on low and such, with other systems — but (again) written it off as observational error. For all the world it's like I'm hearing the CPU working (as opposed to the GPU; note the window scroll thing above) or data being transferred somewhere, but that just seems...unlikely. So what am I hearing? This may seem like a very localized question, but perhaps other silent PC enthusiasts may be interested as well...

    Read the article

  • Is surge protection actually needed?

    - by andrew
    Am I am an idiot for not using a surge protected powerboard? Does this mean my computer gets fried in a power outage? Which particular parts of the computer are most vulnerable to damage if I get a 'surge'? Sorry for being a newb.

    Read the article

  • CPU Temperature required for auto-shutdown.

    - by ULTRA_POROV
    At what temperature do most motherboards/cpus power down to prevent damage? And what determines this? Is it the bios, the motherboard, the cpu itself? I have a cpu that stays on in the bios until about 105 C and then shuts down. I am not sure if this is correct? Maybe the sensors are wrong. I think 105 is a bit high. I guess 80-90 would be more reasonable for an auto shutdown.

    Read the article

  • postfix mail server and spam

    - by darko petreski
    Hi, I have a postfix mail server for our firm. The mails sent from this server to gmail and yahoo goes in spam. The postfix is configured on our server and it has never been used for spamming. Everything is configured as is should. The server works fine, the headers are as they should be. What should I do in order the messages not to go in spam ? Regards

    Read the article

  • How to stop Windows Server Standard from booting me while remoted in?

    - by Mike Pateras
    I'm using Remote Desktop connection to connect to a Windows Server box, on which I am an admit. If I'm idle for a few minutes, it locks me out (killing file transfers, which is a problem), and a few minutes after that, it severs my connection. Where can I find the settings that govern these things to stop that from happening? I want it to let me stay connected, regardless if I'm idle.

    Read the article

  • Cloning hard drive -- data, operating system settings, everything

    - by Salman A
    I am using Windows XP. My hard drive (Seagate 160gig Barracuda) is about to fail. Its already developed bad sectors and it seems to get worse everyday. Data transfer mode is down to PIO mode 2, chkdsk runs every now and then, registry and important windows files get corrupted and I spend 30-60 minutes running chkdsk /f /r from the recovery console. I've got a replacement (Seagate 5000gig Barracuda) and now i want to transfer each and every thing on to the new drive. I don't want to go through windows and software installation, I spent ages getting all those software installed and configured on that hard drive. Need advice: whats the best way to transfer everything onto the new drive so that it behaves just like the old one. And are there any "gotchas".

    Read the article

  • iMac goes black, makes clicking sound... thoughts?

    - by Josh
    This is the second time this has happened. The display on my Apple iMac (20-inch Late 2006) just went black, system was completely unresponsive to mouse/keyboard input, I could not SSH into nor ping the machine, and it didn't show up in ARD. I could hear a fairly loud clicking noise from inside which sounded like the DVD drive trying to seek -- but there is no disc in the drive. It could possibly be the hard drive... I pressed the power button and the system powered off, and now will not power on again. Thoughts / suggestions as to next course of action?

    Read the article

  • Matte or non-widescreen laptop? Do they exist?

    - by Alan Harris-Reid
    Does anyone know of any matte-screen laptops being sold now (15.6 or 17") in the UK? All I can find is the Dell Vostro 3500/3700 range, but there is a premium of around £200 over the price of their Inspiron range (for the 17" model), and I find it hard justifying the extra cost just to have a matte screen. I do not like glossy screens, but it seems the laptop industry has gone the way of "glossy is better - let's get rid of matte". I have read and heard from other developers that as long as there are no strong light sources to reflect off the screen, one can soon get used to a glossy screen, but I am yet to be convinced. I would also be interested if anyone knows of any non 16:9 screen laptops. I find this ratio too wide and not high-enough for the work I do. 16:10 or lower would be better. Any opinions would be appreciated. Alan

    Read the article

  • Upgrade the Graphics Card for a Dell Dimension 3100

    - by Pat Foran
    Hi, I have a Dell Dimension 3100 Desktop with a 128MB Graphics Card Integrated into the Mother Board. I need to upgrade this 128MB to at least 256MB or 512MB if the system will support same. I am told by Dell that all I have is a PCIx1 slot and that they do not stock a Graphics Card for this. I was told to shop around at Amazon and ebay etc and I would find one there. I have shopped around for some time now and do not know exactly what I am looking for. There are several PCI Graphics Card out there but which one would be the correct one for a Dell Dimension 3100. Can you help me resolve this problem. If you know of a PCIx1 card that will sort out my problem you might please let me have all the details for to purchase it. Regards, Pat,

    Read the article

  • Sun Solaris Server Voltage issue

    - by dcd
    I have a sun solaris server which die off recently due to voltage issue Checking with sun solaris support personnel the cost is like 5k or 6k per maintence year support. I am wondering whether it is worth the price or should i instead purchase a new solaris server and redo the setup etc. Any advise anyone? And also is there anyaway i can remove the harddisk in the existing solaris server and put into the new server?

    Read the article

  • Aliased network interfaces and isc dhcp server

    - by Jonatan
    I have been banging my head on this for a long time now. There are many discussions on the net about this and similar problems, but none of the solutions seems to work for me. I have a Debian server with two ethernet network interfaces. One of them is connected to internet, while the other is connected to my LAN. The LAN network is 10.11.100.0 (netmask 255.255.255.0). We have some custom hardware that use network 10.4.1.0 (netmask 255.255.255.0) and we can't change that. But we need all hosts on 10.11.100.0 to be able to connect to devices on 10.4.1.0. So I added an alias for the LAN network interface so that the Debian server acts as a gateway between 10.11.100.0 and 10.4.1.0. But then the dhcp server stopped working. The log says: No subnet declaration for eth1:0 (no IPv4 addresses). ** Ignoring requests on eth1:0. If this is not what you want, please write a subnet declaration in your dhcpd.conf file for the network segment to which interface eth1:1 is attached. ** No subnet declaration for eth1:1 (no IPv4 addresses). ** Ignoring requests on eth1:1. If this is not what you want, please write a subnet declaration in your dhcpd.conf file for the network segment to which interface eth1:1 is attached. ** I had another server before, also running Debian but with the older dhcp3 server, and it worked without any problems. I've tried everything I can think of in dhcpd.conf etc, and I've also compared with the working configuration in the old server. The dhcp server need only handle devices on 10.11.100.0. Any hints? Here's all relevant config files: /etc/default/isc-dhcp-server INTERFACES="eth1" /etc/network/interfaces (I've left out eth0, that connects to the Internet, since there is no problem with that.) auto eth1:0 iface eth1:0 inet static address 10.11.100.202 netmask 255.255.255.0 auto eth1:1 iface eth1:1 inet static address 10.4.1.248 netmask 255.255.255.0 /etc/dhcp/dhcpd.conf ddns-update-style none; option domain-name "???.com"; option domain-name-servers ?.?.?.?; default-lease-time 86400; max-lease-time 604800; authorative; subnet 10.11.100.0 netmask 255.255.255.0 { option subnet-mask 255.255.255.0; pool { range 10.11.100.50 10.11.100.99; } option routers 10.11.100.102; } I have tried to add shared-network etc, but didn't manage to get that to work. I get the same error message no matter what...

    Read the article

  • Crashes and freezes after fixing "BOOTMGR is missing" error

    - by Greg-J
    I came back from a 3-day weekend to a computer that was off. I leave my PC on 24/7, so this was odd. Turn it on to get the dreaded "BOOTMGR is missing" screen. Two attempts at Windows Recovery and it booted into Windows fine. After an hour or so, I get a frozen Chrome and my start bar disappears. Ctrl+Alt+Del brings up an error box telling me that Ctrl+Alt+Del failed to work properly. Clicking on any open application triggers an error (I can't recall the error now, but it essentially just said that the application couldn't be found running or something along those lines). I restart, and again, the same thing happens after a while of use. I turn it on, install the 47 updates I have or so, and then restart it. After a while of use (under an hour), it just freezes completely. My thoughts are: SSDs, RAM or PS. My system specs below: (RAID0) 2 x Crucial M4 CT128M4SSD2 2.5" 128GB SATA III MLC Internal Solid State Drive (SSD) CORSAIR Vengeance 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model CML16GX3M4A1600C9 CORSAIR HX Series HX750 750W ATX12V 2.3 / EPS12V 2.91 SLI Ready CrossFire Ready 80 PLUS GOLD Certified Modular Active 1 x ASUS Maximus IV Gene-Z/GEN3 LGA 1155 Intel Z68 HDMI SATA 6Gb/s USB 3.0 Micro ATX Intel Motherboard 1 x Hitachi GST Deskstar 7K1000.C 0F10383 1TB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive 1 x Intel Core i7-2600K Sandy Bridge 3.4GHz (3.8GHz Turbo Boost) LGA 1155 95W Quad-Core Desktop Processor Intel HD Graphics 1 x SAPPHIRE 21197-00-40G Radeon HD 7970 3GB 384-bit GDDR5 PCI Express 3.0 x16 HDCP Ready CrossFireX Support Video Card 1 x Noctua NH-D14 120mm & 140mm SSO CPU Cooler This is all crammed in a pretty small case (NZXT Vulcan) and has been running perfectly problem-free since January. The only thing out of the ordinary is that there is a fan in the case that is now making noise whereas the case has previously been completely silent. I have no reason to believe this is anything more then correlation, but felt it is worth mentioning. I believe it MAY be the SSDs simply because of the BOOTMGR error, but not sure how to test that theory. My belief that it may be the RAM is simply from experience with frozen machines. I haven't had the time to memtest it, but will. The PS being the culprit is something I've picked up by reading similar threads on various forums, and it seems plausible. I am unsure how to test this though. ANY insight whatsover would be greatly appreciated!

    Read the article

  • How can I find a laptop if it has a different name all over the world?

    - by Mike
    CONUNDRUM: A laptop review in the UK talks about how brilliant the "ASUS ABCDE 55" is, but in America, France, etc there is no such laptop name. In fact it's called "ASUS 12345 AB" - AAARRGH! QUESTION: Is there a way of finding out all the diverse names for the same laptop all over the world? Example: if Samsung create a R2D2500, then what is that spec laptop called in all the other countries (if they release it of course). Or if it's not released, what is their similar spec laptop called in the other countries? I understand that specs may be different, but if I read a review on my trusted UK website, but live in say Australia, I want to be able to find the name of the same laptop in Australia and then check out local places to buy it. So if anyone knows if there is a technique, specific website, or even how to use a company website to find out these annoying name changes I'd really appreciate it.

    Read the article

< Previous Page | 425 426 427 428 429 430 431 432 433 434 435 436  | Next Page >