Search Results

Search found 13860 results on 555 pages for 'core graphics'.

Page 464/555 | < Previous Page | 460 461 462 463 464 465 466 467 468 469 470 471  | Next Page >

• Analyze a BSOD (irql_less_than_or_equal)

  - by Bruno Reis

  Hello. About 2 months ago I bought a new system and built it at home: Mother board: XFX X58i Processor: Core i7 920, using the stock cooler Memory: 3x2GB Corsair DDR3 1600 Video card: NVIDIA GTS 250 (1GB) Hard disk: 2x WD 500GB, 7200rpm I have 2 screens plugged into the video card, and the system is connected to a 550W PSU. Nothing is overclocked. After building the system, I stressed it a lot with Prime95 and rthdribl to check its stability. All my tests were perfect. So I reinstalled Win 7 x64 Professional and started using it normally. The first week (2010-03-15) I got the infamous irql_less_than_or_equal BSOD. Ten days after (2010-03-24) I got another one. Then on 2010-04-09, 2010-05-04. Since 2 days ago it became worse: I got one bluescreen per day! (2010-05-12, 2010-05-13, 2010-05-14). I installed BlueScreenView to try to obtain some information, but I'm not able to extract any useful information apart from the bug check string (irql_less_than_or_equal), and that it was caused by ntoskrnl.exe (the first three at ntoskrnl.exe+71f00, the last 4 at ntoskrnl.exe+70600 -- which I suspect could be the same thing, as Microsoft could have patched this file in the mean time, so the address of the function causing it changed). Then I stressed my memory sticks with memtest, they worked perfectly. After booting, I've stressed my GPU with FurMark and RTHDRIBL, everything was fine. Then I stressed the CPU with 4 instances of Prime95 while monitoring the temperature -- that never exceeded 85oC with the case closed --, everything fine. Finally I've stressed the whole system with HeavyLoad for a looooong time, everything worked just fine. So, I have stressed most of the components of the system, but couldn't get any useful information from it. Do you have any hint on what else can I do to find the culprit? Thanks Bruno

  Read the article

• dd oflag=direct 5x fast

  - by César

  I have Centos 6.2 in server with this specs: 2xCPU 16 Core AMD Opteron 6282 SE 64GB RAM Raid controller H700 1GB cache NV - 2HD 74GB SAS 15Krpm RAID1 stripe 16k (OS Centos 6.2) sda - 4HD 146GB SAS 15Krpm RAID10 stripe 16k (ext4 bs 4096, no barriers) sdb -> /vol01 Raid controller H800 1GB cache nv - MD1200 12HD 300GB SAS 15Krpm RAID10 stripe 256k (For DB Postgres 8.3.18) (ext4 bs 4096, stride 64, stripe-width 384, no barriers) sdc -> /vol02 I'm benchmarking IO speed with dd, and view thah if in RAID10 12 disk exec: dd if=/dev/zero of=DD bs=8M count=10000 oflag=direct 10000+0 records in 10000+0 records out 83886080000 bytes (84 GB) copied, 126,03 s, 666 MB/s but if I remove "oflag=direct" option obtain about 80 MB/s. In read benchmark, results are similar: dd of=/dev/null if=DD bs=8M count=10000 iflag=direct 10000+0 records in 10000+0 records out 83886080000 bytes (84 GB) copied, 79,5918 s, 1,1 GB/s If remove iflag=direct obtain 150MB/s... I don't understand this huge differences, on other machines y don't have this behavior. Can I have some kernel parameter misconfigured? Thanks!

  Read the article

• Poor SSL performance with vsftpd

  - by petrus

  I'm trying to tweak vsftpd to achieve maximum performance for my usage: I have only one or two clients that connect to the server. File size is between ~15MB and 1GB. Typical transfer batch represent between 1 and 2GB of data. For testing purposes, I'm using a tmpfs on both sides (thus eliminating any disks bottleneck) with a single 1GB file. When SSL is disabled, performance is good, with a transfer rate at ~120MB/s (reaching the limits of gigabit networking). With SSL enabled only for control traffic (and not data traffic), performance drops at about 112MB/s, which is still within the acceptable limits. However, when SSL is enabled for data flows, the transfer speed drops dramatically: 6.7MB/s using 3DES & SHA (ssl_ciphers=DES-CBC3-SHA in vsftpd.conf) 16MB/s using DES & SHA (ssl_ciphers=DES-CBC-SHA) I didn't tested other ciphers, but from what I can see from the CPU usage during the transfer, it seems that vsftpd is only using a single cpu/core per client. While this can fit for large ftp sites with hundreds of clients, I'd like to avoid this behavior and use more ressources on the server. On a side note, if you have any ideas regarding other openssl ciphers...

  Read the article

• Restricting memory area for linux kernel

  - by user1066789

  I am running ltib linux on P1022RDK (P1022 Core) platform. I have 512 MB = 0x20000000 memory. I want my linux kernel to use second half of the board memory (i.e from 256 MB to 512 MB) and want first half of memory to be reserved for some other purpose. For this I am building linux kernel using ltib. For that purpose I am setting following kernel configuration. Please suggest if I am doing it the right way. CONFIG_LOWMEM_SIZE = 0x10000000 # 256 MB CONFIG_PHYSICAL_START = 0x10000000 # Starting from 256MB (second half of memory) On the Uboot I am loading the kernel as following way setenv loadaddr 0x11000000 # Kernel base = 0x10000000 + 0x01000000 (offset) setenv fdtaddr 0x10c00000 # Kernel base = 0x10000000 + 0x00c00000 (offset) bootm $loadaddr - $fdtaddr My kernel Load address is 0x10000000 & kernel entry point is 0x10000000 Doing above configuration / steps my kernel stuck at following on Uboot ## Booting kernel from Legacy Image at 11000000 ... Image Name: Linux-2.6.32.13 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 3352851 Bytes = 3.2 MB Load Address: 10000000 Entry Point: 10000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 10c00000 Booting using the fdt blob at 0x10c00000 Uncompressing Kernel Image ... OK ================ >> It should uncompress FDT here & continue ============== Any thoughts ?

  Read the article

• Restricting memory area for linux kernel

  - by user1066789

  I am running ltib linux on P1022RDK (P1022 Core) platform. I have 512 MB = 0x20000000 memory. I want my linux kernel to use second half of the board memory (i.e from 256 MB to 512 MB) and want first half of memory to be reserved for some other purpose. For this I am building linux kernel using ltib. For that purpose I am setting following kernel configuration. Please suggest if I am doing it the right way. CONFIG_LOWMEM_SIZE = 0x10000000 # 256 MB CONFIG_PHYSICAL_START = 0x10000000 # Starting from 256MB (second half of memory) On the Uboot I am loading the kernel as following way setenv loadaddr 0x11000000 # Kernel base = 0x10000000 + 0x01000000 (offset) setenv fdtaddr 0x10c00000 # Kernel base = 0x10000000 + 0x00c00000 (offset) bootm $loadaddr - $fdtaddr My kernel Load address is 0x10000000 & kernel entry point is 0x10000000 Doing above configuration / steps my kernel stuck at following on Uboot ## Booting kernel from Legacy Image at 11000000 ... Image Name: Linux-2.6.32.13 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 3352851 Bytes = 3.2 MB Load Address: 10000000 Entry Point: 10000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 10c00000 Booting using the fdt blob at 0x10c00000 Uncompressing Kernel Image ... OK ================ It should uncompress FDT here & continue ============== Any thoughts ?

  Read the article

• Git fails to push with error 'out of memory'

  - by jwir3

  I'm using gitosis on a server that has a low amount of memory, specifically around 512 MB. When I try to push a large folder (happens to be a backup from an android phone), I get: me@corellia:~/Configs/$ git push origin master Counting objects: 18, done. Delta compression using up to 8 threads. Compressing objects: 100% (14/14), done. fatal: Out of memory, malloc failed MiB | 685 KiB/s error: pack-objects died of signal 13 error: failed to push some refs to 'git@dagobah:Configs' I've been searching the web, and notably found: http://www.mail-archive.com/[email protected]/msg01747.html as well as http://git.661346.n2.nabble.com/Out-of-memory-error-during-git-push-td5443705.html but these don't seem to help me for two reasons: 1) I am not actually out of memory when I push. When I run 'top' during the push, I get: 24262 git 18 0 16204 6084 1096 S 2 1.2 0:00.12 git-unpack-obje Also, during the push if I run /head/meminfo, I get: MemTotal: 524288 kB MemFree: 289408 kB Buffers: 0 kB Cached: 0 kB SwapCached: 0 kB Active: 0 kB Inactive: 0 kB HighTotal: 0 kB HighFree: 0 kB LowTotal: 524288 kB So, it seems that I have enough memory free, but it's actually still failing, and I'm not enough of a git guru to figure out what is happening. I would appreciate it if someone could give me a hand here and tell me what could be causing this problem, and what I can do to solve it. Thanks! EDIT: The output of running the ulimit -a command: scottj@dagobah:~$ ulimit -a core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 204800 max locked memory (kbytes, -l) 32 max memory size (kbytes, -m) unlimited open files (-n) 1024 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 10240 cpu time (seconds, -t) unlimited max user processes (-u) 204800 virtual memory (kbytes, -v) unlimited file locks (-x) unlimited

  Read the article

• Reasonable automatic HTML to PDF conversion (in UNIX/Linux environment)

  - by Alex Balashov

  Is there a way to generate PDF documents from HTML files automatically in Linux where the PDF offers some kind of reasonable level of resemblance to the input file? A command-line tool - as opposed to an interactive GUI of some kind - is key. I have tried htmldoc and some related cousins, of course. But these tools are hopelessly stone-age; htmldoc doesn't support CSS at all. You won't find a lot of HTML documents these days that don't have at least some CSS styling. I don't really care about stupid effects or minor embellishments, but the issue is that CSS is at the core of most layouts these days; not many folks are using 6 layers of nested tables anymore. So, if the conversion tool has no grasp of CSS whatsoever, it's not just a matter of "the document doesn't look quite right"; it is likely to not meet the minimum standard of usability at all. It has been suggested to me by some folks to try to use the Gecko rendering engine to generate images that can be converted to PDFs, but I have no idea how one would go about doing this, let alone easily. I have no trouble believing that there are good commercial tools that do this, but I'm really looking for an open-source package if possible, as the endeavour itself is an open-source one and doesn't pay. Thanks in advance!

  Read the article

• Kickstart CentOS 6 prompting for TCP/IP with network set to DHCP

  - by Andy Shinn

  I am trying to stop my kickstart CentOS install prompting me for TCP/IP information. After I click through this prompt (keeping IPv4 and IPv6 to their defaults) the installation continues and completes just fine. Below is my kickstart file: # Andy's super awesome VM kickstart file install url --url=http://mirrors.kernel.org/centos/6/os/x86_64 lang en_US.UTF-8 keyboard us text %include /tmp/network.ks rootpw --iscrypted $6$RA8DyrNTsVJkGIgY$ohZ62HHiOjNnn1yDMZlIu3lQ63D3plGPcbVZtPKE8Oq6Z.IGUgN.kNLkxs/ZymZuluRDWsW2eey5zLOl2G3mp. firewall --service=ssh authconfig --enableshadow --passalgo=sha512 selinux --disabled timezone America/Los_Angeles bootloader --location=mbr --driveorder=vda --append="crashkernel=auto rhgb quiet" # The following is the partition information you requested # Note that any partitions you deleted are not expressed # here so unless you clear all partitions first, this is # not guaranteed to work zerombr clearpart --all --drives=vda --initlabel part /boot --fstype=ext4 --size=500 part pv.253002 --grow --size=1 volgroup vg1 --pesize=4096 pv.253002 logvol / --fstype=ext4 --name=lv_root --vgname=vg1 --grow --size=1024 --maxsize=51200 logvol swap --name=lv_swap --vgname=vg1 --grow --size=4032 --maxsize=4032 repo --name="CentOS" --baseurl=http://mirrors.kernel.org/centos/6/os/x86_64 --cost=100 repo --name="Puppet Labs Products" --baseurl=http://yum.puppetlabs.com/el/6/products/x86_64 repo --name="Puppet Labs Dependencies" --baseurl=http://yum.puppetlabs.com/el/6/dependencies/x86_64 repo --name="EyeFi" --baseurl=http://flexo.eye.fi/6/eye-fi-api %packages @core @server-policy puppet facter %end %pre --erroronfail #!/bin/bash for x in `cat /proc/cmdline`; do case $x in SERVERNAME*) eval $x echo "network --onboot yes --device eth0 --bootproto dhcp --hostname ${SERVERNAME}.eye.fi" /tmp/network.ks ;; esac; done %end %post puppet agent --waitforcert 10 --onetime --no-daemon --pluginsync --server puppet.eye.fi %end reboot My kernel arguments are in this following virt-install command that I use to start the install: virt-install -n zabbix -r 2048 --vcpus=2 -l http://mirrors.kernel.org/centos/6/os/x86_64 --disk /dev/vg_inf1/zabbix --network bridge=br85 --initrd-inject=/home/ashinn/vm_kickstart --extra-args "ks=file:/vm_kickstart SERVERNAME=zabbix" --autostart During the install, I can pull up a console on the second terminal and verify the contents of /tmp/network.ks are: network --onboot=yes --bootproto=dhcp --ipv6=auto --hostname=jenkins2.mydomain.com Why might Anaconda be prompting for the TCP/IP settings when they are already set to DHCP?

  Read the article

• Apache2 slow serving static while healthy

  - by user45339

  My Apache status looks like; 201 requests/sec - 98.8 kB/second - 504 B/request 85 requests currently being processed, 345 idle workers _____CCW_C_____C__C__C_R____C_WC_________C__C____CW__C__CCC_____ __C____W______C___C___CW__C_C______C__W_C__C_____CCC____C______R CC_C_______C___C____C______________C______C__C________________C_ ___________________C______________________C_______C___C_____C___ CC____C__C___R_____C_C_CC__________C___C___________R____C_C_C___ ______C______W_W__W___C____________________C__WCC__R__R_C_______ R__RC________________________C___R____W__C____.................. .................................................... Server load is average 2 on a 4 core machine. IO utilization is 10-15% and doesn't have many jumps over 70%. Machine has almost 4 gb free and uses 0 swap. The site on the machine is a PHP site. All PHP code is optimized and fast mostly when it gets accessed, however sometimes requests get stuck. Stuck meaning; no response for at least 10 sec. We debugged the PHP code, but it is quite optimal and fast. We spend a lot of time on it until we decided to test the requesting of: <html><body>test</body></html> test.html page. This static resource also gets 'stuck' in the same manner the php pages get 'stuck'. How is the possible given the health of the system? I tested the network, but, when the PHP shows 'slowness' in the site monitoring, the html test files also take (far longer) than 10 sec to load using; time lynx -dump http://127.0.0.1/test.html We are kind of desperate to solve this problem, but we cannot seem to tackle it.

  Read the article

• What does this mean: "SATP VMW_SATP_LOCAL does not support device configuration"?

  - by Jason Tan

  Can anyone tell me what this means in ESXi 5.1?: SATP VMW_SATP_LOCAL does not support device configuration I've googled it and I get a lot of results, but as yet all the pages that contain the string are discussing other matters. The storage array is a HDS HUS-VM and the hosts are HP b460c G8 blades with flex fabric and flex fabric VCs which I am in the process of commissioning and would like to get it started on the right foot - i.e. error and warning free! naa.600508b1001c56ee3d70da65f071da23 Device Display Name: HP Serial Attached SCSI Disk (naa.600508b1001c56ee3d70da65f071da23) Storage Array Type: VMW_SATP_LOCAL Storage Array Type Device Config: SATP VMW_SATP_LOCAL does not support device configuration. Path Selection Policy: VMW_PSP_FIXED Path Selection Policy Device Config: {preferred=vmhba0:C0:T0:L1;current=vmhba0:C0:T0:L1} Path Selection Policy Device Custom Config: Working Paths: vmhba0:C0:T0:L1 Is Local SAS Device: true Is Boot USB Device: false This is the same LUN: ~ # esxcli storage core device list -d naa.60060e80132757005020275700000016 naa.60060e80132757005020275700000016 Display Name: HITACHI Fibre Channel Disk (naa.60060e80132757005020275700000016) Has Settable Display Name: true Size: 204800 Device Type: Direct-Access Multipath Plugin: NMP Devfs Path: /vmfs/devices/disks/naa.60060e80132757005020275700000016 Vendor: HITACHI Model: OPEN-V Revision: 5001 SCSI Level: 2 Is Pseudo: false Status: degraded Is RDM Capable: true Is Local: false Is Removable: false Is SSD: false Is Offline: false Is Perennially Reserved: false Queue Full Sample Size: 0 Queue Full Threshold: 0 Thin Provisioning Status: unknown Attached Filters: VAAI_FILTER VAAI Status: supported Other UIDs: vml.020001000060060e801327570050202757000000164f50454e2d56 Is Local SAS Device: false Is Boot USB Device: false ~ #

  Read the article

• Why Virtual Box won't give me option to create 64 bits guests?

  - by Eduardo Born

  My host is x64 bits Windows 8.1. I downloaded the latest Virtual Box (4.3) and I'm trying to create a VM with a 64 bits Ubuntu OS (ubuntu-12.04.3-desktop-amd64). When I go to New VM wizard, it doesn't give me option to select "Ubuntu (x64)" as I have seen in other people's screenshots, only just "Ubuntu". As a result, the ISO can't boot. I tried in another PC and Virtual Box gives the x64 variants to most listed OS... Control Panel shows x64 OS, x64 processor. My host laptop is a Sony Vaio VPCZ22UGX/N, Intel® Core™ i7-2640M processor. CPUz shows Vx-t is available on my processor, of course. Here is what I tried so far: I enabled IO APIC as required in the docs. I have virtualization enabled in the BIOS. It works fine in VMware. Check that Hyper-V is not running or even installed on my Windows. Same for VMware. I also tried running the command: VBoxManage modifyvm [vmname] --longmode on for that VM, but no change.. I think the issue is really that I can't select x64 variant of the Ubuntu OS for that VM. Other people seem to indicate that's a requirement, but I don't get that option for some reason. I spent a lot of time and can't find what's wrong... Anyone knows what could be missing here? Thank you very much!! Eduardo

  Read the article

• Adobe premiere CS5 problem with the display driver

  - by user30179

  This error is really hindering our project. I get an error, it started showing-up June 16th 2010. There are no windows updates at the on the same date as the error, other than (Windows Defender) Seems to happen when working with Image overlays. ERROR: "The NVIDIA OpenGL driver detected a problem with the display driver and is unable to continue. The application must close." We opened the side of the case in the possibility there is an over heating problem. Nvidia Driver ver 8.16.11.9175 (nVidia Quadro FX 1700) I am running: Windows 7 x64 Adobe premiere CS5 Production nVidia Quadro FX 1700 (MRGA14L) 4 Gig ram RAID 10 2 750GB drives Duo core 3.0 6MB L2 Cache This is at least three other people that have come across this error: NVidia Forum EVGA Forum NVidia Forum UPDATE: Having the case open did not help. I also installed New Nvidia drivers now I get a different error: *ERROR:*Your hardware configuration does not meet minimum specifications needed to run the application. The application must close. I ran Windows Update and installed all four updates so now I am waiting to see if the error occurs again. Anything beyond this I am out of options.

  Read the article

• Windows 7 - svchost high cpu usage.

  - by Leonardo

  Hey guys! I'm having a problem with windows 7 x64 i though it was slow and all then i saw that the cpu usage was always around 80% and started digging through google. there's two svchost consuming around 30% each and in the resources monitor there's a system interrupts consuming 45% all the time, i trid closing the aplications and makes no diference. so i tried some other things that i've found on gloogle like disable system update but didn't work. i'd love some help here. i don't know if it will help but here's my specs: Core 2 duo 4400 ATI radeon 4850 4gb ram DDR2 thanks anyway for your attention :) EDIT So i run the program and i got this info, did i get it right? EDIT As you asked here it is, did i get it right now? the other tcp/ip there's nothing. thanks again! :D EDIT I tried somthing here, i run msconfig and took the services that one of the svchost was using out of the startup and now my cpu is around 50%, but i still would like to make this better, i can't lose that much cpu power just because windows... thanks. EDIT yeah there's nothing i can do here, going to install xp for a while, it's really weird...

  Read the article

• SQL Server 2008 Web VS SQL Server 2008 Enterprise

  - by Jeremy

  I wrote an application a few months ago, and was hosting it out of our offices on a workstation with an Intel Core 2 Quad Q8200 @ 2.33GHz, 8 GB RAM, Windows Server 2008 Enterprise and SQL Server 2008 Enterprise. Both the webserver and database server were run on the same machine. We had a huge influx in traffic, and moved ClubUptime.com, and got 2 of their top teir windows VMs. The Database server runs Windows 2008 R2 Standard and SQL Server 2008 R2 Web on 8 GB ram and an Intel Xeon e5620 @ 2.40GHz. Ever since switching, the database which used to run at around 400MB in RAM now runs at around 4-7GB, and there haven't been any changes to it (other than a couple columns here and there). Our traffic has quadrupled, and our DB is 6 GB on disk, why would SQL server take up 7 GB if the DB is only 6. And why would it be storing the ENTIRE database in memory? Another thing is why growing 4 times in size did the database's memory footprint grow 12 times? Last question: Why does the CPU peg at 100% now where it didn't before? The design is simple, VERY few joins, NO subqueries. I am just at a loss, unless it is the SQL server edition, or the fact that I moved from real hardware to a VM.

  Read the article

• Shared files folder in Amazon Elastic Beanstalk environment

  - by por

  I'm working on a Drupal application, which is planned to be hosted in Amazon Elastic Beanstalk environment. Basically, Elastic Beanstalk enables the application to scale automatically by starting additional web server instances based on predefined rules. The shared database is running on an Amazon RDS instance, which all instances can access properly. The problem is the shared files folder (sites/default/files). We're using git as SCM, and with it we're able to deploy new versions by executing $ git aws.push. In the background Elastic Beanstalk automatically deletes ($ rm -rf) the current codebase from all servers running in the environment, and deploys the new version. The plan was to use S3 (s3fs) for shared files in the staging environment, and NFS in the production environment. We've managed to set up the environment to the extent where the shared files folder is mounted after a reboot properly. But... The Problem is that, in this setup, the deployment of new versions on running instances fail because $ rm -rf can't remove the mounted directory, and as result, the entire environment goes down and we need restart the environment, which isn't really an elegant solution. Question #1 is that what would be the proper way to manage shared files in this kind of deployment? Are you running such an environment? How did you solve the problem? By looking at Elastic Beanstalk Hostmanager code (Ruby) there seems be a way to hook our functionality (unmount if mounted in pre-deploy and mount in post-deploy) into Hostmanager (/opt/hostmanager/srv/lib/elasticbeanstalk/hostmanager/applications/phpapplication.rb) but the scripts defined in the file (i.e. /tmp/php_post_deploy_app.sh) don't seem to be working. That might be because our Ruby skills are non-existent. Question #2 is that did you manage to hook your functionality in Hostmanager in a portable way (i.e. by not changing the core Hostmanager files)?

  Read the article

• Black Screen on Logon (windows 7 home premium)

  - by Blacknight334

  i have been having some trouble with a dell Xps 15 laptop that i recently purchased. it is under a month old, and a problem has occurred, upon logging on just after start up, the computer will just sit on a black log on screen (with the mouse still visible and active) for a few minutes. it is extremely annoying, especially when im in a rush. the laptop is under a month old. So far, i have tried to update the drivers, all windows update, and still, nothing. also, it doesnt seem to do it when i log into safe mode, or if it does, it will do it for less than 10 seconds, then load the desktop (in normal boot, it usually takes a few minutes). i have also run a number of the inbuilt diagnostics, but found no errors. i want to avoid having to do a system restore for as long as i can. does anyone know anything that can help? (the laptop is running a 500gb SSD, 2gb Nvidia 640m, 8gb ram, 3rd gen i7 quad core with 8 threads) thanks.

  Read the article

• SATA Windows 7 Problems

  - by Isaacs

  Scenario: Core 2 Duo processor, Gigabyte MB, 4 SATA Western digital 500 GB hard drives, windows 7 64 bit. Problem: Copying data from USB or among SATA hard drives is faulty. When trying to copy 20GB from one HD to another it starts off with normal ~14-15 MB/s transfer rates and eventually bogs down to < 120KB/s transfer rates. If I leave it alone over night I come back with my computer crashed and setting at BIOS detecting hard drives. Troubleshooting: Removed all but 1 HD with OS on it, everything seems to be happy. I can copy large files from USB HD to main/single HD. Ran SpinRite on all hard drives, no errors found. Tried adding one HD to machine and problem exists, tried switching SATA cables, and SATA ports on MB. Reinstalled windows 7 x2 (from different disks..). Oddly enough if I boot to a ubuntu everything works fine. Getting ready to purchase a new MB, but wanted to see if anyone had suggestions. Thanks!

  Read the article

• Chrome browser completely messing with network?

  - by kiasecto

  I have a bizare problem with Google Chrome on a intel core i5 running windows 7 32bit. Whenever chrome is installed, access to other computers in the home group becomes really slow - such as opening shares. Its becomes really slow to resolve windows names. Something goes hay-wire with the local network - pining local machines which is usually 0mS pings I get random timeouts and random successes. Whenever I try to load a local address inside of chrome (including localhost, 192.168.0.1 etc) - it always says something in the status bar about resolving proxy and times out after about 5 seconds, then seems to work fine. If I go to settings inside of chrome, it just brings up the internet explorer connection settings, where I have not set any proxy settings. One I uninstall chrome, all these problems go away. Network shares and name resolvings work instantly, pings to any machines never have a problem. Localhost and other network IP address work fine in all other browsers. Anyone heard of this problem before and know what it might be? I even tried re-installing winodws 7 and the problem came straight back when chrome was loaded on again.

  Read the article

• Get Illegal Instruction error when booting Linux in VirtualBox, works fine when booted directly

  - by rkjnsn

  I have a computer on which I am dual booting Windows 7 and Gentoo Linux (both 64-bit). I want to be able to load up my Linux installation in a VM while I am booted into Windows. I have installed VirtualBox and followed the instructions for creating a raw disk VMDK. When I start the VM, Linux starts booting, but then fails with the following error when unlocking my root partition: truecrypt[441] trap invalid opcode ip:373615538e0 sp:3dd0e0dfb60 error:0 in libpixman-1.so.0[373614d6000+8d000] Everything works fine when I boot into Linux directly. What could cause an illegal instruction to be hit in libpixman only when booting in VirtualBox? Update: As a troubleshooting step, I recompiled pixman without "-march", and no longer get an illegal instruction error in that library. (The boot fails in the same spot with the same error in a different library, however.) How can I determine the specific opcode that isn't working in VirtualBox so I can disable it in my CFLAGS without having to disable all CPU-specific optimizations? I am still confused as to why there would be any user-mode instruction that would fail to work in a VM. Is this a known limitation? My CPU is an Intel Core i7 3720QM, and I have hardware virtualization support enabled.

  Read the article

• How can I debug a port/connectivity issue?

  - by rfw21

  I am running a simple WebSocket server on Amazon EC2 (Fedora Core). I've opened the relevant port using ec2-authorize, and checked that it's opened. Iptables is definitely not running. However I can't connect to the port from outside EC2. I've tried the following (my server is running on port 7000): telnet ec2-public-dns.xx.xx.xx.amazon.com 7000 (from within EC2: connects fine) nmap localhost (output includes line: 7000/tcp open afs3-fileserver) telnet ec2-public-dns.xx.xx.xx.amazon.com 7000 (this time from my local machine: I get "connection refused: Unable to connect to remote host") The strange thing is this: if I start Nginx on port 7000 then it works and I can connect from outside EC2! And the WebSocket server fails on port 80, where Nginx works fine. To me this suggests a problem with the WebSocket server, BUT I can connect to it successfully from within EC2. (And it works fine on a different VPS account). How can I debug this further? If anybody can stop me tearing my hair out, I'd be very grateful indeed :)

  Read the article

• How to manage processes-to-CPU cores affinities ?

  - by Philippe

  I use a distributed user-space filesystem (GlusterFS) and I would like to be sure GlusterFS processes will always have the computing power they need. Each execution node of my grid have 2 CPU, with 4 cores per CPU and 2 threads per core (16 "processors" are seen by Linux). My goal is to guarantee that GlusterFS processes have enough processing power to be reliable, responsive and fast. (There is no marketing here, just the dreams of a sysadmin ;-) I consider two main points : GlusterFS processes I/O for data access (on local disks, or remote disks) I thought about binding the Linux Kernel and GlusterFS instances on a specific "processor". I would like to be sure that : No grid job will impact the kernel and the GlusterFS instances Researchers jobs won't be affected by system processes (I'd like to reserve a pool of cores to job execution and be sure that no system process will use these CPUs) But what about I/O ? As we handle a huge amount of data (several terabytes), we'll have a lot of interuptions. How can I distribute these operations on my processors ? What are the "best practices" ? Thanks for your comments!

  Read the article

• Investigating a potential CPU failure

  - by Jernej

  On a Ubuntu server that I am using for computations I have recently observed that some CPU extensive programs (GUROBI,CPLEX) often segfault. Being in correspondence with tech support of the respective programs I was suggested that it may be a hardware issue. The administrator of the server performed a detailed memtest and it turned out that the RAM modules appear to be fine. Hence I've used the tool mprime to test the CPU and the following two lines appear multiple times durring the execution of the stress tests: [Worker #4 Oct 18 18:47] FATAL ERROR: Rounding was 0.498046875, expected less than 0.4 [Worker #4 Oct 18 18:47] Hardware failure detected, consult stress.txt file. The stress.txt file in itself is not very verbose about what could be the cause of this error so I would like to ask whether anyone here happens to know what could be the cause of this issue? Is there some other test I could perform to nail the problem even further? The temperature of the system (and all cores) was fine during the entire stress test (+69.0°C (high = +80.0°C, crit = +98.0°C)) the CPU in question is a Intel Core i7-2600K CPU @ 3.40GHz and is not overclocked or modified in any way. Also what is interesting that if I run mprime to only stress the CPU all tests pass fine. The error is only triggered when I let mprime stress the CPU+RAM.

  Read the article

• Windows 7 restarts while being idle

  - by Ondrej Slinták

  My Windows 7 almost always restarts when I keep it idle for ~20-30mins. It happened randomly before, but lately, if I leave the computer I can be sure it's gonna restart after those 30mins. It never happens when I play games or work tho, just when it's idle. It's a fresh install of Windows 7 64bit. I had also problems while installing it, it always crashed while finalizing the install and I had to reinstall again. Eventually it installed on 3rd or 4th try after I deleted all of my partitions and added them again. I thought it might have been a hardware problem, but temperatures seem to be okay and I have no idea how to track what might have been causing it. Any ideas? I'm running Windows 7 64bit on: Gigabyte EX58-UD4P Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz NVIDIA GeForce GTX 260 6GB of DDR3 1066Mhz RAM WDC WD1001FALS-00J7B0 1TB SATA II I have a very bad feeling it might be something with HDD and its compatibility with Windows 7 as I haven't had those problems for 1 year while I had Vista.

  Read the article

• Why does my DSDT table is different from what I found online?

  - by Hao Shen

  I have found a field in DSDT table where I want to modify from here http://www.ztex.de/misc/c2ctl.e.html Generally, I want to modify the _PSS field about the processor so that I can have more frequency levels available in the CPUfreq driver interface. I try to use this command to dissemble the DSDT table from my Desktop(Linux2.6.29,Intel CORE 2): cat /proc/acpi/dsdt > dsdt.aml iasl -d dsdt.aml Then I have a file dsdt.dsl as following(very long, so I just show the beginning of the file): /* * Intel ACPI Component Architecture * AML Disassembler version 20090123 * * Disassembly of dsdt.aml, Mon May 6 20:41:40 2013 * * * Original Table Header: * Signature "DSDT" * Length 0x00003794 (14228) * Revision 0x01 **** ACPI 1.0, no 64-bit math support * Checksum 0x46 * OEM ID "DELL" * OEM Table ID "dt_ex" * OEM Revision 0x00001000 (4096) * Compiler ID "INTL" * Compiler Version 0x20050624 (537200164) */ DefinitionBlock ("dsdt.aml", "DSDT", 1, "DELL", "dt_ex", 0x00001000) { Method (DBIN, 0, NotSerialized) { Noop } Scope (\) { Device (_SB.VBTN) ................... But I can not find the _PSS field as shown in the website I have given above. I do not know why? I am sure the current cpufreq driver shows 4 frequency levels available. So at least there should be something in the table showing this..right? Has anybody here played with the DSDT table before? Thanks,

  Read the article

• Probability of Blade Chassis Failure

  - by ChrisZZ

  In my organisation we are thinking about buying blade servers - instead of rack servers. Of course technology vendors also make them sound very nice. A concern, that I read very often in different forums, is, that there is a theoretical possibility of the server chassis going down - which would in consequence take all the blades down. That is due to shared infrastructure. My reaction on this probability would be to have redundancy and by two chassis instead of one (very costly of course). Some people (including e.g. HP Vendors) try to convince us, that the chassis is very very unlikely to fail, due to many redundancies (redundant power supply, etc.). Another concern on my side is, that if something goes down, spare parts might be required - which is difficult in our location (Ethiopia). So I would ask to experienced administrators, that have managed blade server: What is your experience? Do they go down as a whole - and what is the sensible shared infrastructure, that might fail? That question could be extended to shared storage. Again I would say, that we need two storage units instead of only one - and again the vendors say, that this things are so rock solid, that no failure is expected. Well - I can hardly believe, that such a critical infrastructure can be very reliable without redundancy - but maybe you can tell me, whether you have successfull blade-based projects, that work without redundancy in its core parts (chassis, storage...) At the moment, we look at HP - as IBM looks much to expensive... thanks a lot best regards Christian

  Read the article

< Previous Page | 460 461 462 463 464 465 466 467 468 469 470 471  | Next Page >