Search Results

Search found 15665 results on 627 pages for 'inno setup'.

Page 464/627 | < Previous Page | 460 461 462 463 464 465 466 467 468 469 470 471  | Next Page >

• What benchmark tool to use to benchmark hardware for VM server?

  - by Mark0978

  We are setting up a new piece of hardware to virtualize several of our servers on. Choices are RAID 5, RAID 6, and RAID 0+1. We are wanting to benchmark all three before we go live with the machine, but I'm not sure how to test the speed. Since we will be using it to host VMs, what will the actual disk traffic look like? What can I use to see if RAID 6 is too slow? Short of setting up the system with all the VM's on it and running that way, then redoing on all the work, I'm not sure how to test it. It them becomes more of a subjective test than an objective one. I'm worried that RAID6 will have too much overhead, that RAID5 will be to fragile with 3TB drives and I've never worked with 0+1 at all. So in short I'd like to setup the base machine (which will be running Linux) and then test the underlying SW RAID for speed. What kind of tool exists to simulate this kind of load? Barring the lack of a specific tool, how about a generic FS testing tool that will simulate different loads?

  Read the article

• AjaxControlToolkit JavaScript is not pointing correctly on IIS7 running behind Apache mod_proxy

  - by sohum

  So here's my setup. I've got a DynDNS account since I have a dynamic IP. I have Apache listening on port 80 and IIS7 on port 8080. I don't want users to have to enter in mydyndns.dyndns.com:8080 to get to IIS7, so I've added the following code to my Apache httpd.conf file to enable a proxy/reverse proxy: <VirtualHost *:80> ProxyPass / http://localhost:8080/myASPSite/ ProxyPassReverse / http://localhost:8080/myASPSite/ ServerName myaspsite.mydomain.com </VirtualHost> I've got a CNAME record set up on my DNS so that myaspsite.mydomain.com redirects to mydyndns.dyndns.com. When I type in myaspsite.mydomain.com into my browser, everything works beautifully... mostly. IIS7 serves up the ASPX pages and visitors to the site don't know any better. A problem arises, however, when I add Ajax Control Toolkit controls into my ASPX website, because these generate JavaScript and apparently mod_proxy_html isn't geared to handle the JS URIs properly. Sure enough, when I open up the source of my ASPX page, it has script elements as follows: <script src="/myASPSite/WebResource.axd?xyz" type="text/javascript"></script> <script src="/myASPSite/ScriptResource.axd?xyz" type="text/javascript"></script> Sure enough, these scripts are attempting to be resolved at http://myaspsite.mydomain.com/myASPSite/WebResource..., which through the proxy translates to localhost:8080/myASPSite/myASPSite/.... How can I solve this problem. The couple of websites I found suggested turning on ProxyHTMLExtended but when I tried doing that, the server did not start. I'm guessing I didn't know how to do it properly. Anyone has a handy couple of config lines that I can add to my Apache conf file to get this working as I need? I'm using Apache 2.2.11. Thanks!

  Read the article

• nginx inserting extra characters in Multi-status reply body

  - by user125011

  Here's the setup. I've got one server running apache/php hosting ownCloud. Among other things, I'm using to do CardDAV contact syncing. In order to make things work with my domain I have an nginx server running on the frontend as a reverse-proxy to the ownCloud server. My nginx config is as follows: server { listen 80; server_name cloud.mydomain.com; location / { proxy_set_header X-Forwarded-Host cloud.mydomain.com; proxy_set_header X-Forwarded-Proto http; proxy_set_header X-Forwarded-For $remote_addr; client_max_body_size 0; proxy_redirect off; proxy_pass http://server; } } The problem is that when my phone does a PROPFIND on the server, nginx adds extra characters to the content body that throw the phone off. Specifically, it prepends d611\r\n at the front of the body and appends 0\r\n\r\n to the end of the content. (I got this from wireshark.) It also re-chunks the result. How do I get nginx to send the original content as-is?

  Read the article

• 4.00gb (3.25gb usable) in Windows 7 x64

  - by dotnetdev

  Hi, I have setup Windows 7 Ultimate x64 on my PC. I have 4gb RAM and my BIOS states the correct amount (4096mb), but I cannot Windows (System Manager) says I have 4.00gb (3.25gb usable). This seems to be a popular issue, and I have looked for an integrated video card (integrated with my chipset) to disable but haven't found anything. What else can be preventing me from seeing all 4gb? When I had Vista 32bit, it would say 3.25gb RAM not 4.00gb (3.25gb usable). I have an x64 CPU and when I brought my RAM, I used a compatibility tool from Crucial (the memory vendor) to test how much memory my PC can support and 4gb was the answer (this was a windows app I think). Chipset is Intel(R) G33/G31/P35/P31 Express Chipset PCI Express In the bios, I looked for an onboard video card (integrated) and there was no such thing, but a couple of other onboard devices. There are also no "Resource Mappings" settings. FURHTER DETAILS: Chipset North Bridge: Intel Bearlake G33 South Bridge: Intel 82801IR ICH9R Maximum Memory Amount 8 GB Graphics Controller Type Intel GMA 3100 (Enabled) I guess the first thing is, how do I disable the graphics controller? EDIT: This thread (http://forums.legitreviews.com/about23417.html) indicates the issue is with memory mapped devices, but someone on this thread says that does not apply to x64. The rest of the comments points to a mobo issue for the guy who started that thread. Thanks

  Read the article

• Joining Samba to Active Directory with local user authentication

  - by Ansel Pol

  I apologise that this is somewhat incoherent, but hopefully someone will be able to make enough sense of this to understand what I'm trying to achieve and provide pointers. I have a machine with two network interfaces connected to two different networks (one of which it's providing several other services for, such as DNS), running two separate instances of Samba, one bound to each interface. One of the instances is just a workgroup-style setup using share-level authentication, which is all working fine. The problem is that I'm looking to join the other instance to an MS Active Directory domain (provided by MS Windows Small Business Server 2003) to enable a subset of the domain users to access the shares from Windows machines on the other network. The users who need access from the domain environment have accounts (whose names are all-lowercase versions of their domain usernames) on the machine running Samba, but I'm not sure about how to map the UIDs and everything I've read concerns authenticating accounts on that machine against either AD or another LDAP server. To clarify: I only want the credentials for AD users accessing the non-workgroup Samba instance to be authenticated against AD, not the accounts on the machine running Samba. I hope this is sufficiently clear. EDIT: In addition to being able to access the Samba shares from AD, I do also need to be able to access a share on the domain from the machine running Samba but would still like everything non-Samba-related to authenticate locally.

  Read the article

• Accessing SSH_AUTH_SOCK from another non-root user

  - by Danny F

  The Scenario: I am running ssh-agent on my local PC, and all my servers/clients are setup to forward SSH agent auth. I can hop between all my machines using the ssh-agent on my local PC. That works. I need to be able to SSH to a machine as myself (user1), change to another user named user2 (sudo -i -u user2), and then ssh to another box using the ssh-agent I have running on my local PC. Lets say I want to do something like ssh user3@machine2 (assuming that user3 has my public SSH key in their authorized_keys file). I have sudo configured to keep the SSH_AUTH_SOCK environment variable. All users involved (user[1-3]), are non privileged users (not root). The Problem: When I change to another user, even though the SSH_AUTH_SOCK variable is set correctly, (lets say its set to: /tmp/ssh-HbKVFL7799/agent.13799) user2 does not have access to the socket that was created by user1 - Which of course makes sense, otherwise user2 could hijack user1's private key and hop around as that user. This scenario works just fine if instead of getting a shell via sudo for user2, I get a shell via sudo for root. Because naturally root has access to all the files on the machine. The question: Preferably using sudo, how can I change from user1 to user2, but still have access to user1's SSH_AUTH_SOCK?

  Read the article

• Troubleshooting wireless connection problem / site survey?

  - by johnnyb10

  I just started in the IT department of a small company (200 users) and it's clear that one of the main problems that is driving everyone crazy is the spotty nature of the wireless connectivity throughout the office, particularly in certain conference rooms. This is a huge problem because the connection often drops during important presentations to clients. I was hired to help ease the load on the existing IT admin, who has done a great job, but is overloaded with many other tasks to deal with. So I would like to try to help out with this wireless issue. I am looking for advice on the best way to solve this problem--a realistic troubleshooting methodology that does not require me to spend any money. So far, I've experimented with Ekahau Heat Mapper, which is free and helps create a site survey. But I'm not exactly sure what I'm looking for or if there are other programs/tools/methods I should try as well. Any advice would be greatly appreciated. [Some background: The wireless setup consists of an HP ProCurve Mobility MSM (710?) controller that controls 10 access points throughout the building. There are three virtual wireless networks configured on the controller: one seems to be a default that cannot be changed, one is for internal employees and authenticates via Active Directory, and the third is a guest network for visitors. When I use HeatMapper, these show up as three different SSIDs, with different MAC addresses, all on the same channel. At first I thought maybe this would cause interference, but this seems to be the way the controller works;apparently, it automatically configures the channels to avoid interference from the other APs on the network.]

  Read the article

• connect server to server on secondary NIC

  - by microchasm

  Hi, I have a CentOS box with multiple NIC's running Apache. I also have another box running RHEL that will be the MySQL server. I'm trying to use the secondary NIC on the Apache box to connect directly to the MySQL server, but so far no luck. I want to isolate the MySQL box as much as possible which is why I'm going for a direct connection as opposed to running through a switch. I have a crossover cable running between them. IP configs: Apache box eth0 [to lan] ip addr: 192.168.200.100 netmask: 255.255.0.0 gateway: 192.168.111.1 eth1 [to mysql] ip addr: 192.168.200.101 netmask: 255.255.0.0 gateway: [blank] MySQL box eth0 [to apache] ip addr: 192.168.200.203 netmask: 255.255.0.0 gateway: 192.168.200.201 The rest of our network is on 192.168.111.0/24 subnet. Ping only returns Destination Host Unreachable. I've tried various variations of this setup (including straight through cable), and I can't seem to get them to talk to each other. Any help appreciated.

  Read the article

• How to speed up a HP M9517C

  - by Jen

  I bought a system with 8GB RAM, 1TB HD, Quad-Core AMD Phenom 9550, Nvidia Geforce 9300GE, 64-bit Windows Vista Machine. Bought it primarily because it was cheap and came with 25.5 inch screen. Problem: It's slow - if you can believe it. My Dell laptop 1525 is faster and more stable! I tried installing and dual-booting Linux Mint and ran into video and audio troubles. I need fast and stable and I'm going for awesome. Anyone have some suggestions on making this thing smoking hot? Vista is fine, but slows over time - suspect virus/spyware/etc.. But I need to use Photoshop, Fireworks, Dreamweaver, Illustrator. I've tried the alternatives and I just don't like them. When you've got deadlines looming you want to work with what you know. Also use Skype (and I had audio problems with it in Linux), gotomeeting, gotowebinar. Don't need MS Office. Tried VMWare, Virtualbox and again - I keep getting audio/video problems. I'd love someone's input on THEIR setup and how they got there. I'm sure I need to upgrade my video card, but what should I go to?

  Read the article

• Mouse click-focus wanders in vmPlayer 3.0 dual-monitor

  - by Gary M. Mugford

  Previously, a WinXPSP3 session running on a WinXPSP3 host computer ran perfectly fine in a dual monitor setup. No issues with vmPlayer 2.x. BEFORE updating to vmPlayer 3, the following problem cropped up. When clicking in a single monitor, you would get exactly what you expected. However, when the display was stretched across two monitors, the clicking would be to the left of the mouse cursor. The farther RIGHT you were, the farther left the click would occur. In other words, if you clicked on the system menu of a window in the upper left of a window on the left monitor, you would get the system menu. Move half a screen to your right and the click would be on an item about a quarter of the way over, rather than where you were clicking. And by going all the way to the far right of the right monitor, you could bring up a right-click menu on the far right of the LEFT monitor. I Hope I have described this properly. It's confusing, even in words. In single monitor mode, everything works perfectly fine. If, instead of using either UltraMon or DisplayFusion, you run a single desktop across both monitors (3200x1600), there are no mousing issues. Unfortunately, having two 1600x1200 monitors, that depth of 1600 makes that hack less than useable. My graphic card won't offer anything resembling 3200x1200. vmPlayer 3.0 did not alleviate the situation. The microsoft mouse drivers are up to date and so are the nVidia card drivers. Any ideas?

  Read the article

• Domain authentication over OPEN wireless pre-logon (Windows 7 Pro) - No logon servers avail

  - by Shadow00Caster

  I have a plethora of laptops that are joined to an AD domain. I have an enterprise wireless system setup, the users of these laptops will be using an OPEN unsecured SSID which will ultimately have a captive portal that uses Radius-AD auth and firewall rules to allow access pre-captive portal auth to the proper ip's/ports of DC's etc for auth etc. I already have other laptops/users connecting to another SSID with 802.11x and SSO, all works perfectly pre-logon etc. My problem is with this open network, for some reason I cannot get the machines to auth to AD. The laptops connect to the wireless network, I confirm this on the controller and can ping the laptop at startup. I sharked the wires on the 2 DC's that these machines auth to, I can see a DNS SOA update from a laptop im testing with and can ping that test laptop from both DC's. When I try to logon, "There are currently no logon servers available to service the logon request." The shark shows no incoming connections to either DC even though the laptop is connected and pingable. Any help is greatly appreciated.

  Read the article

• How to wire 20 computers and 20 phones and 1 server into LAN?

  - by John Smith

  I have currently 3 switches Two Netgear JFS524 with 24 slots, One Belkin with 16 slots. Server DSL Internet Router. Main question is how to connect switches together, two Netgear's are next to each other, yet one is about 100 feet away and holds about 5 computer and 5 phones. If i connect them with only 1 wire will that limit bandwidth? e.g. all 23 computers will be limited to speed of one CAT5e cable? If i connect switches with 2 cables will this give speed boost? What's the ideal scenario should i just move the third switch next to other two? Will the speed of computer connected to white switch be same as computer connected to top switch? Will moving white switch right next top switch and having 16 wires comming 100 feet instead of 1 wire comming 100 feet make it faster? EDIT 1: I actually have NETGEAR ProSafe GS105 Gigabit switch its only has 4 ports in it though, you think i can have use of it in current setup? Like connect all 3 switches and server into it and keep internet router and phone server on one of the slower switches EDIT 2: Everyone mention gigabit switches, but will they do any difference with 10/100 network cards? I then have to use gigabit cards in every computer too? I could in server perhaps, but users will be 10/100

  Read the article

• Sophos UTM in Hyper-V

  - by TheD

  So, I had a previous thread about this Virtualizing Firewalls/UTM. Essentially, I have configured what I think would work, but networking isn't my strong point! Two Virtual Adapters - with IP addresses 192.168.0.2 (External) and 192.168.0.3 (Internal) respectively. The External Adapater looks at 192.168.0.1 (my Zyxel) for it's default gateway. The Internal Adapter, 192.168.0.3, which is what the Sophos UTM listens on, has it's default gateway set to 192.168.0.2, the IP of the External Lan interface. So, PC (192.168.0.11, DHCP) --> (LAN) --> Switch --> 192.168.0.3 (Internal LAN Interface IP) --> Sophos UTM --> 192.168.0.2 (External LAN Interface IP) --> 192.168.0.1 --> Internet Would this be the correct setup, or am I completely out of the game here? Cheers!

  Read the article

• OS X can't copy files from Windows Home Server...over wifi.

  - by John Clayton

  I'm a brand spanking new user of OS X, coming from a lifetime of Windows use. I've been setting up my new Macbook Pro and have run into a very unusual problem. Over wifi, I am unable to copy files to or from my Windows Home Server. The problem seems to exist only over wifi, and only to WHS. Here are the details of my setup: 2010 Macbook Pro (Core i7), OS X 10.6.3 Windows Home Server PP3 (virtualized in XenServer 5.5) Windows 7 Ultimate x64 desktop Windows 7 Ultimate x64 in Boot Camp D-Link DIR-655 wireless N router Here is what I've done to narrow down the problem: Files copy fine from WHS to OS X when using gigabit ethernet Files copy fine from desktop to OS X when using gigabit ethernet Files fail to copy from WHS to OS X when using wifi (error -51) Files copy fine from desktop to OS X when using wifi Files copy fine from WHS to Boot Camp when using wifi Files copy fine from desktop to Boot Camp when using wifi From what I can tell, it seems to be some sort of issue between OS X and WHS, but I can't for the life of me see what would be different between shares on WHS and my desktop. They are both connected using smb://ADDRESS (I've tried both by IP and name). I can browse the shares on the WHS, but copying to OS X fails. I originally found the issue while installing VS2010 off an ISO from WHS, mounted to a Windows 7 VM using VMware Fusion. During the installation the VM was unusable - even the clock got behind the host be about 8 minutes. Once I plugged in the ethernet and disabled the wifi things picked up and finished quickly. The Fusion 3.1 RC is the only I think of that I installed that may have messed with the wifi driver. I've also tried resetting the wifi router, and have changed it from being G & N to N-only. Under Boot Camp I get similar speeds as my wife's N laptop. Any ideas? Thanks!

  Read the article

• Hard Disk:S.M.A.R.T. Stas BAD, Back up and replace

  - by Nick

  I have an laptop top hard drive I was trying to use to my new media computer. The case is small and can accommodate for 2 2.5" drives, no 3.5" drives. I had been using the hard drive as storage hard drive until now. When I go to install Windows on the hard drive first I'm prompted at the bios of: Hard Disk:S.M.A.R.T. Stas BAD, Back up and replace. And then again in the Windows Setup, informing me that the hard drive is bad. So I did a full format of the drive and tried again. Same error. So I took it out and hooked it back up to my other computer via an Sata usb adapter kit (maybe the cause?). The hard drive is recognized fine and when I scanned it for errors by going: right click -> properties -> tools -> error checking It returns that the hard drive is fine. I have tried 3 different SATA cables and multiple jumpers. When I plugged in my 1.5 tb 3.5" drive the computer that gives me the S.M.A.R.T. error on the 2.5" drive, recognizes it with no problems. Any ideas on why this is happening and how I can fix it?

  Read the article

• HTPC/DVR computer won't go into standby

  - by Robert

  When I select Start-Turn off computer-Standby the 'turn off computer' option window closes, and then nothing else happens. I can start new applications, and Windows acts like I never selected standby. I ran it for several hours after that. If I have a TV program scheduled to record when I select standby I get a window (the Pinnacle TV software) asking if I'm sure, there are programs scheduled to record - and the computer just keeps running after I select yes, never going into standby. I added that detail as it shows the standby process is starting. [This problem also happens if a TV program is not scheduled, so the scheduler task in not running/in memory. This problem happens regardless of whether I'm not watching TV. This problem happens regardless of whether Media Center is running (it usually isn't, I'm using Pinnacle to watch TV).] I looked at "How to troubleshoot hibernation and standby issues in Windows XP" http://support.microsoft.com/kb/907477 - ACPI is enabled, and "standby" is an option in "Power Options Properties." So it appears to be setup correctly. Windows XP SP3 Media Center Edition, all current updates installed.

  Read the article

• A separate user for each task?

  - by Mark Tomlin

  I just got a VPS sver the other day, I'm new to server administration, but not that new to Ubuntu (11.04). I use it in my living room as the HTPC, and I had a previous VPS that I used on and off for a team speak server. This one I'm setting up for long term use. So I would like to know the best practice when it comes to websites and tasks that I have the server proforming. I understand that it could be beneficial to separate each website into it's own usergroup or under its own username. I would setup nginx so that it could read all of the users directors (and thus each website) but could not touch anything else. The same with the TeamSpeak, should I make a user for TeamSpeak so that it operates within its own confined area or is this overkill? I do have access to root on the sever and my current plan is to run about 4 websites and a TeamSpeak server. My stack is Linux (Ubuntu 11.04 LTS), nginx, and PHP 5.4.3 (using the PDO SQLite 3 built in driver for the database). Should PHP have it's own user group or is it ok to place it in with nginx?

  Read the article

• SQL Server 2008 Remote Access

  - by Timothy Strimple

  I'm having problems connecting to my SQL Server 2008 database from my computer. I have enabled remote connections as described in this answer (http://serverfault.com/questions/7798/how-to-enable-remote-connections-for-sql-server-2008). And I have added the ports listed on the microsoft support page to our Cisco Asa firewall and I'm still unable to connect. The error I'm getting from the SQL Management Studio is: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) (Microsoft SQL Server, Error: 10060) Once again, I have double and triple checked that remote connections are enabled under the database properties and that TCP is enabled on the configuration page. I've added tcp ports 135, 1433, 1434, 2382, 2383, and 4022 as well as udp 1434 to the firewall. I've also checked to make sure that 1433 is the static port that is set in the tcp section of the database server configuration. The ports should be configured correctly in the firewall since http/https and rdp are all working and the sql server ports are setup the same way. What am I missing here? Any help you could offer would be greatly appreciated. Edit: I can connect to the server via TCP on the internal network. The servers are colocated in a datacenter and I can connect from my production box to my development box and vice versa. To me that indicates a firewall issue, but I've no idea what else to open. I've even tried allowing all tcp ports to that server without success.

  Read the article

• Intermittent unavailability of an instance in a failover cluster while a standby node is offline in

  - by Emil Fridriksson

  Hi everyone. I've got a small failover cluster that I run for the websites my company has. During a RAM upgrade of the standby server, our websites started to show errors about not being able to access the database server. I verified that the instance was indeed up and the server accessable via remote desktop. I also tried a SQL connection to it and it worked, but that might have been after it became available again. This happened on and off until we were able to roll back the hardware changes that were in progress on the standby server and we were able to bring it back up. There was nothing of interest in the SQL Server log, but there is a continous log for the whole duration of the problem, so there was no restart of the SQL Server service. The event viewer is of more interest, since it shows events relating to the heartbeat network card, but I don't know how that would affect the availability of the server, since the standby node is offline. I'd appreciate any help you can provide, it's not very redundant if the setup depends on the standby server being up. :) Here are the event logs from the time of the problem, I include all of them since I can't seem to see what could possibly be the cause of the problem. Event log: http://hlekkir.com:800/htmltable.htm

  Read the article

• How do I make dnsmasq serve IP addresses via IPoIB?

  - by Matt

  I have a cluster farm that I'm setting up. The nodes (computers in the farm) are connected via ethernet & IP over Infiniband. I'm needing to netboot the nodes and thought dnsmasq would fit well as it provides all the features including support for DHCP over IB and it works great for our ethernet setup. However, I can't seem to get it to provide IP addresses to the infiniband adaptors on the nodes. Each node is running an Ubuntu desktop 12.04 LTS. The dnsmasq server is running on ubuntu server 12.04LTS and has the following test config: dhcp-authoritative domain-needed bogus-priv expand-hosts no-hosts domain=local dhcp-range=eth0,10.0.0.10,10.0.0.255,12h dhcp-option=eth0,3,10.0.0.1 dhcp-range=ib0,10.1.1.10,10.1.1.255,12h dhcp-option=ib0,3,10.1.1.1 log-queries log-dhcp IPoIB works between nodes when configured statically but not with dhcp. On the nodes the file /etc/network/interfaces contains auto lo iface lo inet loopback auto ib0 iface ib0 inet dhcp #iface ib0 inet static #address 10.1.1.5 #netmask 255.0.0.0 up echo connected >`find /sys -name mode | grep ib0` Is there something I need to do on the client or server end to make this work?

  Read the article

• Huh? JDK not found? (on Windows 7 64-bit)

  - by Android Eve

  I am setting up a development environment for the latest Android 2.3 on a fresh install of Windows 7 64-bit. I first installed the 64-bit JDK 6 (jdk-6u23-windows-x64.exe). Then, I installed 64-bit Eclipse Classic 3.6 (eclipse-SDK-3.6.1-win32-x86_64.zip). Then, I proceed to install the Android SDK Starter Package: installer_r08-windows.exe. But... upon start it says: "Java SE Development Kit (JDK) not found." Why? I just installed it. Is this a mismatch between 32-bit and 64-bit? How do I solve this? Update (1): I tried setting the %JAVA_HOME% environment variable, as well as setting the Installed JREs in Eclipse, as suggested below. None of these solved the problem. It appears that I am not the only experiencing the problem, as this thread suggests: http://stackoverflow.com/questions/1919340/android-sdk-setup-under-windows-7-pro-64-bit I wonder whether there is a 64-bit version of the Android SDK. Update (2): I used the zip version instead (android-sdk_r08-windows.zip), ran android.bat, updated all SDK packages, and installed the ADT plugin (8.0.1), not before having to check: 'Contact all update sites during install to find required software'. We'll see how this goes... Update (3): It worked! (going to accept @bubu's answer shortly) -- but why doesn't the emulator include the HelloAndroid app when I run it (Ctrl+F11) from Eclipse?

  Read the article

• Samba between Ubuntu server 10.10 and Windows Vista, Windows 7

  - by chepukha

  Hi all, I have a linux box running Linux server ubuntu 10.10. I have installed Samba on this linux box and want to share files with my laptops which run Windows Vista home and Windows 7 home. I have been struggling with the setup for almost a month but couldn't get it right. If I try to access share folder from Windows Vista, I get message "Windows cannot access \\server_ip_address". Error code: 0x80070035. The network path was not found. If I access from Windows 7, then after entering password to login I can see the list of share folders on Linux box. But if I click on a share folder, I get the same error message as above. Tail /var/log/samba/log.windows7-pc I got the following message: [2011/03/16 00:17:41.427238, 0] smbd/service.c:988(make_connection_snum) canonicalize_connect_path failed for service sharemedia, path /root/sharemedia Here is my setting in smb.conf [global] share modes = yes netbios name = Samba workgroup = WORKGROUP wins support = yes encrypt passwords = true [sharemedia] comment = Tesing sharing using Samba path=/root/sharemedia/ public = yes valid users = samba_usr_name ; make sure all files are sensible permissions create mask = 0660 force create mask = 0660 directory mask = 2770 force directory mask = 2770 directory security mask = 0000 ; Normal share parameters read only = no browseable = yes writable = yes guest ok = no

  Read the article

• LCD monitor flicker when connected to a laptop using VGA

  - by Björn Lindqvist

  I have a dual screen setup with two AOC e2450Sw monitors connected to a laptop. The laptop has one HDMI and one VGA output. When one of the monitors is connected using VGA, it flickers or displays static noise. The flickering is fairly subtle and only visible on darker colors. But it is there and noticable and appears like horizontal lines. The problem only appears on the monitor connected to the laptop using the VGA cable. If I swap the monitors, the one connected using VGA is displaying the flicker but not the one connected using HDMI. The simple solution would ofcourse be to connect both monitors using HDMI, but since the laptop only has one VGA and one HDMI out that isn't possible. I've tried tweaking the monitor setting using the OSD menu, but it had little or no effect. Update: After several more trouble shooting hours, it seems the problem is not related to the monitor or VGA cable as the problem persists even if I swap the display with another brand and different cables. So it may be the graphics card? Intel HD Graphics 4000. The laptop is Acer Aspire E1-571.

  Read the article

• ghettoVCB issue

  - by romgo75

  Hi, I setup ghettoVCB script in order to backup 3 VM. I put it in a crontab but I have an issue. In my backup folder I have 3 different folder, one for each VM. For each Folder I have th following files : -rw-r--r-- 1 root root 1263 Mar 17 01:51 vm1-2010-03-16--2.gz -rw-r--r-- 1 root root 1263 Mar 17 00:41 vm1-2010-03-16--3.gz -rw-r--r-- 1 root root 1261 Mar 18 01:22 vm1-2010-03-17--1.gz drwxr-xr-x 1 root root 980 Mar 19 23:39 vm1-2010-03-19 The problem is the last folder. It seems that a backup didn't finished the process. When I read the logs concerned by this folder I get : 2010-03-19 23:00:01 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/datastore1/backup/ 2010-03-19 23:00:01 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3 2010-03-19 23:00:01 -- info: CONFIG - DISK_BACKUP_FORMAT = zeroedthick 2010-03-19 23:00:01 -- info: CONFIG - ADAPTER_FORMAT = buslogic 2010-03-19 23:00:01 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0 2010-03-19 23:00:01 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0 2010-03-19 23:00:01 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 3 2010-03-19 23:00:01 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5 2010-03-19 23:00:01 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15 2010-03-19 23:00:01 -- info: CONFIG - LOG_LEVEL = info 2010-03-19 23:00:01 -- info: CONFIG - BACKUP_LOG_OUTPUT = stdout 2010-03-19 23:00:01 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0 2010-03-19 23:00:01 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0 2010-03-19 23:00:01 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all http://... 2010-03-19 23:39:35 -- info: Initiate backup for vm1 2010-03-19 23:39:35 -- info: Creating Snapshot "ghettoVCB-snapshot-2010-03-19" for vm1 Destination disk format: VMFS zeroedthick Cloning disk '/vmfs/volumes/datastore1/vm1/vm1_1.vmdk'... ^MClone: 0% done.^MClone: 1% done.^MClone: 2% done.^MClone: 3% done.^MClone: 4% done.^MClone: 5% done.^MClone: 6% done.^MClone: 7% done.^MClone: 8% done.^MClone: 9% done.^MClone Failed to clone disk : The file already exists (39). Destination disk format: VMFS zeroedthick Cloning disk '/vmfs/volumes/datastore1/vm1/vm1.vmdk'... 2010-03-20 00:46:20 -- info: Removing snapshot from vm1 ... one: 7% done.^MClone: 8% done.^MClone: 9% done.^MClone: 10% done.^MClone: 11% done.^MClone: 12% done.^MClone: 13% done.^MClone: 14% done.^MClone: 15% done.^MClone: 16% done.^MCl 2010-03-19 23:51:19 -- info: Removing snapshot from vm1 ... I can't run anymore ghetto VCB because the VM has a snapshot which has not been deleted. I know how to delete the snapshot, but I don't know why the VCB script is not able to handle vm abckup rotate ? Any idea ? Thanks !

  Read the article

• How can I "share" a network share over the internet to multiple operating systems?

  - by Minsc

  Hello all, We have a network share accessible through our intranet that is widely used. This share has it's own set of fine tuned permissions. I have been tasked with allowing A.D. authenticated access to this share over the internet without the use of VPN. The internet access has to mimic the NTSF permissions in place on the share. Another piece of the puzzle is that the access over the internet has to allow perusal of the share from Windows and Mac OS systems. I had envisioned a web front end that would facilitate downloading to and uploading from the share via a web browser. I'm trying to ask for some suggestions about what type of setup is necessary to achieve this. I've done loads of testing and searching for solutions but I can't seem to get anything to work as I hope. The web server that will be handing all of this is a Windows 2K8 box with IIS 7. How can I allow the users to authenticate against Active Directory when coming from the internet even when coming from a Mac system? I hope my question is not too broad, I'm sorry if I should have broken it up into multiple questions. It all is just tied together in my head. Thank you all for your time and aid.

  Read the article

< Previous Page | 460 461 462 463 464 465 466 467 468 469 470 471  | Next Page >