Search Results

Search found 18842 results on 754 pages for 'machine'.

Page 471/754 | < Previous Page | 467 468 469 470 471 472 473 474 475 476 477 478  | Next Page >

• How do I get write access to ubuntu files from Windows?

  - by Steven

  I'm running Ubuntu 11.10 on my Virtual Machine as a web server. I've mounted the W:/ drive in Win 7 to my /www folder in Ubuntu. I can read the files, but I'm not able to write to the files. In Samba, I have created the following user: <www-data> = "<www-data>" And given guest ok for the www folder: [www] comment = Ubuntu WWW area path = /var/www browsable = yes guest ok = yes read only = no create mask = 0755 ;directory mask = 0775 force user = www-data force group = www-data I've also run sudo chmod -R 755 www to make ensure correct rw access. What am I missing in order to get write access to my ubuntu files from Windows?

  Read the article

• A simple Volume Replication Tool for large data set?

  - by Jin

  I'm looking for a solution to the following: Server A (Site A) - Win 2008 R2 - approx 10TB (15TB max) of data - well over 8 million files Server B (Site B) - Win 2008 R2 I want to assynchronously replicate Server A's volume to a volume on Server B for data redundancy. Something that I can say to my users, "go here for data" when/if Server A goes belly up due to machine problems, disaster, etc. Windows 2008 R2 does have DFS, but microsoft does not apparently support this large of a dataset (or more accurately, more than 8 million files - according to the docs I could find). I also looked at Veritas Volume Replication, but this seems almost too much as I would also require Veritas Volume Manager. There are numerous "back-up" software which makes a 1-1 backup, which would be ok, but since it will be transfering over internet, I'd like something that has compression during transfer like DFS has. Does anyone have any suggestions regarding this?

  Read the article

• safeboot and wubi

  - by G S

  Hi, Having read various posts it seems clear that installing Wubi on a machine which already has safeboot installed with disk encryption is a non-starter at the moment - nor is repartitioning the disk it would seem. However while the c: partion is encrypted - it has an NTFS formatted q: partition that is not encrypted and has about 4GB free - so I was wondering if there was any way to install WUBI using that partion. Obvisouly stil need a means of booting into it without stuffing my safeboot booting mechanism. I'm thinking that this should be possible as the safeboot booting mechanism will get me to the boot choice options and thereafter all references in the boot.ini entry for the wubi installtion should be to files on the non-encrypted NTFS partion and so it should be OK and not attempt any changes to my envrypted c: partion (other than adding the extra entry to boot.ini) ? any thoughts? ta

  Read the article

• Is there a command line (or autohotkey) way of dismounting a USB drive?

  - by justintime

  I find dismounting a USB drive takes far too many mouse clicks for my liking. Is there are command line way of doing it (XP and Vista)? Addition I have an eye condition that makes hand mouse coordination difficult so any suggestion that there aren't too many clicks will be downvoted as not answering my question. However I use AutoHotkey a lot and one use case would be to call it from an AHK script. So if there is a way to code it in AHK that will do. Added this to the tags. Further question - is it safe to remove a disk when the computer is a. on Standby or b. Hibernated. I recall that W2000 got uspet if you pulled a disk from a hibernated machine. Or is it better to explicitly dismount or sync before you hibernate or standby - prabably in a script.

  Read the article

• pip install very slow through virtual box

  - by AJP

  pip install --exists-action=w -r requirements.txt is very very slow through virtual box. Any suggests of how to diagnose and fix? Would seeing the VagrantFile be useful? VirtualBox 4.2.12 (can't upgrade to .14 as it doesn't work.) Vagrant 1.0.7 Host machine: ProductName: Mac OS X ProductVersion: 10.7.5 BuildVersion: 11G63b VagrantFile contains: Vagrant::Config.run do |config| config.vm.box = "precise64" config.vm.customize ["modifyvm", :id, "--memory", 2048] config.vm.box_url = "http://files.vagrantup.com/precise64.box" config.vm.network :hostonly, "33.33.33.21" config.vm.forward_port 5000, 5000 config.vm.forward_port 5555, 5555 config.vm.share_folder "v-root", "/vagrant", "./" Vagrant::Config.run do |config| config.vm.provision :shell, :inline => "VENV=/usr/local/venv bash /vagrant/setup_env.sh" end end Normal download speed is only about 5 times slower at 0.8 Mb per second versus 4 MB per second (as judged by curling a 50 Mb file from S3). But pip install is taking about 20 times longer from Mac (i.e. about 40 minutes) versus 2.

  Read the article

• western digital caviar black. EXT4-fs error

  - by azat

  Recently I update my HDD on desktop machine, and bought WD Caviar Black. But after I format & copy information to it (using dd), and fix partitions size: I have next errors in kern.log: Aug 27 16:04:35 home-spb kernel: [148265.326264] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 9054, 32254 clusters in bitmap, 32258 in gd Aug 27 16:07:11 home-spb kernel: [148421.493483] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 9045, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:17 home-spb kernel: [148546.481693] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 10299, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:17 home-spb kernel: [148546.487147] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.258711] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 4345, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.277591] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.278202] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 4344, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.284760] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.291983] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 9051, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.297495] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.297916] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 9050, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.297940] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.303213] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 4425, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.312127] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.312487] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 4424, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.317858] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.322231] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 4336, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.326250] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.326599] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 4335, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.332397] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.341957] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 5764, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.350709] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.351127] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 5763, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.355916] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:43 home-spb kernel: [148572.401055] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 10063, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:43 home-spb kernel: [148572.404357] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:43 home-spb kernel: [148572.414699] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 10073, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:43 home-spb kernel: [148572.420411] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:43 home-spb kernel: [148572.493933] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 9059, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:43 home-spb kernel: [148572.493956] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. One time, machine rebooted (not manually), when I turn it on, it runs fsck on /dev/sdc2 and fix some errors and some files are missing on /dev/sdc2 I'v check /dev/sdc2 for badblocks, it doesn't have it ( using e2fsck -c /dev/sdc2 ) Here is the output of fsck http://pastebin.com/D5LmLVBY What else I can do to understand what's wrong here? BTW for /dev/sdc1 no message like that, in kern.log Linux version: 3.3.0 Distributive: Debian wheezy

  Read the article

• VMWare OVA file

  - by Matteo Mosca

  I've received an .OVA file and I need to be aple to open/parse it. When I try to open it with VMware player, I get the following error: "Failed to open virtual machine: Failed to query source for information." When I try to open it with the Converter standalone client I get: "Unable to parse the OVF file" The extension can be OVF or OVA so I did choose the right file tipe from the open file dialog. If anyone had similar experience and solved it, please let me know. Thanks.

  Read the article

• why is iometer performance slower after first run?

  - by Dan

  I'm doing some benchmarking with IOMeter, and I'm seeing a consistent and susbtantial drop-off in performance after running the first test. These drop-offs are about the same on the three systems I've tested on, which makes me think it's a configuration setting, or just a fact of life about using IOMeter. For example, one system (local RAID 10) went from 388 I/Os per second the first run, to about 211 I/Os per second on every run after that. Everything else about the test was identical, and I also bounced the machine in between runs. So, is this expected behavior, or am I missing something?

  Read the article

• OS X Server - setting up a share for network home directories + fast user switching

  - by sohocoke

  I'm nearly finished setting up my Open Directory master to allow users to be managed centrally and logged in on any of the client machines at home. I found discussion suggesting that using an AFP share for the 'Users' automount would result in network users (cf. users defined locally, or Portable Home Directory users) are unable to use fast user switching, as the first user logging in would trigger the automount and mount the 'Users' share with his permissions, preventing further users from using the mount. I've also found some suggestions to configure autofs such that the 'Users' share is mounted prior to any user logging in, but not great amounts of details along these lines. I'd greatly appreciate some instructions to set up autofs - ideally, on the OpenDirectory server rather than each client's etc/fstab or equivalent location, so that it isn't required per every client machine - to get fast user switching working with network users.

  Read the article

• Services filling up taskbar as applications

  - by Chris

  Windows XP, with Windows Classic theme I've had a sporradic problem, where the task bar seems to fill up with lots of tasks, which seem to be names of services. When I open Task Manager, the Applications tab is filled with these names. I can still continue to use my PC to an extent, but it's not possible to remove all these icons from the taskbar, and other Windows UI features (e.g. Start bar) tend to be 'hollow' so I only see the outline; meaning I have to restart. See screenshot: The trigger seems to be clicking on the "Show Desktop" quick link when I have several applications open (e.g. Outlook, Excel). Has anyone else come across this? It's happened to me on my home machine before, but seems to happen more frequently (2-3 times a week) at work...

  Read the article

• Unable to extend desktop

  - by CSharperWithJava

  I'm trying to hook up my TV to my computer as a gaming/multimedia center but I'm having troubles setting it up. I have a custom built machine running Windows 7 RC. It has an ATI Radeon 4800 video card with 2 dvi output and 1 S-video output. I have an s-video to composite adapter that connects to my tv. (It's an old TV with only Cable, composite, and s-video connections). I can switch the desktop to my TV without a problem, but I can't duplicate or extend my desktop onto it. I've installed the latest drivers and Catalyst Control Center, but it won't let it work any more readily than Windows would. Any suggestions? Would using an s-video cable instead of the adapter change anything? (The only reason I use the adapter is because it came with the graphics card) (Edit) I installed the latest drivers and I can now duplicate the screen (show on one monitor and on the TV), but I still can't extend the desktop.

  Read the article

• ubuntu mass deployment kickstart file how/where?

  - by gkrawiec

  i've succesfully been able to prepare an OEM image that is ready to be cloned and installed in about 1100 machines. My only issue right now is that when the machine boots for the first time it asks for the basic setup questions. I think I have the kickstart file ready, but I dont know how to call it. My logic says that before I run the "prepare to ship to end user" script that I have to modify the boot parameters to call the ks file so the ks.cfg file goes with each drive. My issue is I cant figure out how to modify the boot parameters. Also, i dont know if there is a log i can check to see if its actually calling it or not. I am using ubuntu 12.04 desktop x64. I am trying on /etc/default/grub by modifying one line from GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" to GRUB_CMDLINE_LINUX_DEFAULT="quiet splash ks=file:/ks.cfg" then I run an update-grub but its not working. My ks.cfg file is: ----------------------- #Generated by Kickstart Configurator #System language lang en_US #System keyboard keyboard us #System timezone timezone America/Tijuana Initial user user mytestuser --fullname "Test User" --iscrypted --password $sdfsfsdgthrttyujtkyktru #Rebootafter installation reboot ------------------------- what am I doing wrong? thanks, -gk

  Read the article

• How to monitor the network traffic on a router?

  - by Adi

  Here's my current network set-up: we have 3 users connecting to a Thomson Gateway router (TG585 v8) provided by my ISP. We are connecting over an ADSL line. The problem is that we have a limited data allowance (60GB) and we always exceed it. I would like to monitor how much traffic each computer makes. The best solution would be to install a software on the router (like OpenWRT) which would monitor how much traffic each computer makes. But I couldn't find any replacement firmware that would support my router. The other solution would be to install a software on each machine and then collect all the data at the end of the mount. But that's not a very good think to do. Plus, the users can always shut down the application. Any suggestions?

  Read the article

• Zero bytes on home partition

  - by Michael Z

  I decided to replace the hard drive on my machine running Ubuntu 12.04 LTS . After using the new hard drive for a few days, I noticed that the new hard drive has bad sectors. So I decided to plug my old hard drive back in. First, I plugged both hard drives in and copied some data files from the new hard drive to the old one. After unplugging the new hard drive, I booted the computer with the old hard drive, and here I got a surprise: I can see 0 bytes available on my /home partition! The df utility shows that the /home partition has 0 available bytes. I have tried to move some files. But I still has 0 bytes on /home! However, GParted correctly shows that the available size is near 2Gb. UPDATE 1: To my surprise, System Monitor shows me that approximately 2 Gb are free and 0 bytes are available on the /home partition. It's slightly shocked me! Are "free" and "available" not the same? Any help is really appreciated!

  Read the article

• How to set up wireless access on a Cisco router

  - by Carlos

  Hi, I've set up my 877W according to the configuration listed in this forum post: IPTV over Cisco 877 (It's the working configuration at the bottom of the post) Note that I have an 877W, so it also has a wireless radio. Now, I've gotten the whole setup to work, so IPTV is working, and I can access the internet via the ethernet ports. Now I'm trying to figure out how to allow access via the dot11radio interface. I've gathered that I basically need to create a bridge group, and bridge the radio to the internet VLAN. However, when I add a bridge-group 2 command to VLAN1, it seems to take down the whole internet VLAN. (The IPTV continues to work.) This makes the router itself inaccessible (I've got a laptop, so no serial) and I end up having to reboot the router. Can anyone tell me how to a) Allow wireless access to the internet (preferably with WEP, to match my old router) b) Determine what makes the router inaccessible when I add the new bridge group c) Forward the IPTV traffic onto a machine on my internet VLAN

  Read the article

• How to properly use windows xp mode

  - by user23950

  I just want to know how could I access the applications installed on xp mode in windows 7. I just installed the application in the default location in xp mode which is c:\program files Do I have to install it on the drive where windows 7 is installed so that I could access it quickly? Because I still have to wait for about 2-4 minutes just to open up a word document(ms office installed in xp mode) that is saved in my desktop in my physical machine. Please help. Details: 2Gb of Ram Pentium Dual Core processor 250GB of HDD

  Read the article

• Keeping packages on a large number of openSUSE servers updated

  - by Kamil Kisiel

  Question for anyone out there managing a network of openSUSE machines. How do you keep track of and apply updates? I know about YaST Online Update (YOU) but it seems more geared towards keeping a single machine up to date. It doesn't seem to scale well to a larger number of machines. How do you keep your machines updated? Our network is fairly heterogenous in terms of package installation as the servers are mostly infrastructure machines with varying roles. I know that SUSE Linux Enterprise has tools to manage updates network-wide, but updating to that is currently not an option for budget reasons.

  Read the article

• IIS NLB Web Farm to front Single Tomcat Instance

  - by Brent Pabst

  I've got a single Tomcat 6 server that hosts a JSP app. We just spun up a new IIS 7.5 web farm to host our other internal apps. Currently the machine that hosts Tomcat is also running IIS 7 with the ISAPI filter loaded to provide front-end handling for the JSP app. I'd like to move the IIS portion to the web farm to consolidate our IIS presence and let the Tomcat server just serve and run Java and Tomcat. Has anyone done this, is it even possible while ensuring session state is properly maintained? I had it up and running using the IIS Tomcat Connector http://tomcatiis.riaforge.org/ but after a while the communication between the boxes slowed and pages would not load. In addition it seemed like some of our authentication tickets were timing out. Thanks for any ideas or reference material!

  Read the article

• Shared block device file system (cluster file system without networking)

  - by fungs

  Is there any file system that can be mounted multiple times and supports concurrent file access for Linux? Basically I want something like a cluster file system but without the need to have a running network for a distributed lock manager. That can be very handy in connection with virtual machines that can share data with the host or another VM without the need to create a network link. This I want to avoid to keep the network architecture secure (virtual machine in DMZ) but share large files. No need to scale it up, just two machines that mount the same block device. Shouldn't it be possible to have file locking information right on the disk?

  Read the article

• How to best migrate one Windows 2008 R2 / SharePoint / Exchange / Terminal Services (All-in-one) int

  - by MadBoy

  Hello, My client has one machine with Windows 2008 R2 and everything on it. By everything I mean AD, DNS, SharePoint 2010 Standard, Exchange 2010 Standard, Terminal Services, Office 2010 and a bunch of additional apps. Everything stands on I7 x 2 and 36gb ram for 7 people total. I've decided that we should virtualize it and split things into 4 VM's and keep host only with Hyper-V installed to host all the machines. What problems should I expect? What good advices can you give. My plan is that when i move everything to VM's i will move vm's to safe place and format the host as it has a lot of really bad things happening on it. But this also means that everything will be wiped from current solution so I have to be sure that Exchange etc will work when host gets wiped. MadBoy

  Read the article

• How do I add unmet dependencies for unity-lens-music autogen.sh?

  - by nickform

  I would like to build unity-lens-music on my newly-upgraded Ubuntu 12.10 machine. I followed these instructions from the unity website to get the code. The README was empty but I guessed that ./autogen.sh would be a sensible place to start. Unfortunately it exits with the following error: checking for LENS_DAEMON... no configure: error: Package requirements (glib-2.0 >= 2.27 gobject-2.0 >= 2.27 gio-2.0 >= 2.27 gio-unix-2.0 >= 2.27 dee-1.0 >= 1.0.7 sqlite3 >= 3.7.7 gee-1.0 json-glib-1.0 unity >= 6.90.0 unity-extras >= 6.90.0 tdb >= 1.2.6) were not met: No package 'dee-1.0' found No package 'sqlite3' found No package 'gee-1.0' found No package 'json-glib-1.0' found No package 'unity' found No package 'unity-extras' found No package 'tdb' found When I attempt to satisfy the dependencies that aren't found using apt-get install I either find that there is no exact match (e.g. 'dee-1.0' which matches several packages), I already have the latest version (e.g. sqlite3, unity) or there is no match at all (e.g. unity-extras and tdb). There is a later suggestion to modify PKG_CONFIG_PATH if I have installed software in a non-standard location but, to my knowledge, I have not. How should I proceed?

  Read the article

• OS X Snow Leopard, change file permissions on copy

  - by Francesco K

  I work with OS X, Snow Leopard and need to allow users to make copies of files (templates) located in a read-only repository for subsequent editing. The repository is located on a separate physical drive mounted to the OS X boot volume. As this is a shared computer in a school environment, all users access the machine via a single login ("user_local"). Whether using POSIX permissions or ACLs, the use case requires the file permissions to change from "read" to "read write" as they get copied to the "user_local" home directory. Googling around has not yielded anything that would indicate that this is possible via the Snow Leopard permission system. Question 1: Is this in fact possible via the permission system? If so, how? Question 2: If not possible, how would one go about solving this problem? I imagine this to be a fairly common use case so there must be a workable solution for it out there. Thanks.

  Read the article

• sSMTP Configuration Question

  - by SevenCentral

  I've installed sSMTP on Ubuntu 10.04 via: sudo apt-get install ssmtp My configuration file is: # # Config file for sSMTP sendmail # # The person who gets all mail for userids < 1000 # Make this empty to disable rewriting. [email protected] # The place where the mail goes. The actual machine name is required no # MX records are consulted. Commonly mailhosts are named mail.domain.com mailhub=smtp.gmail.com:587 # Where will the mail seem to come from? #rewriteDomain= # The full hostname hostname=somedomain.com # Are users allowed to set their own From: address? # YES - Allow the user to specify their own From: address # NO - Use the system generated From: address #FromLineOverride=YES [email protected] authpass=**** usestarttls=yes Am I transmitting my credentials in clear text? Is calling ssmtp a secure operation? Thanks.

  Read the article

• Script language native extensions - avoiding name collisions and cluttering others' namespace

  - by H2CO3

  I have developed a small scripting language and I've just started writing the very first native library bindings. This is practically the first time I'm writing a native extension to a script language, so I've run into a conceptual issue. I'd like to write glue code for popular libraries so that they can be used from this language, and because of the design of the engine I've written, this is achieved using an array of C structs describing the function name visible by the virtual machine, along with a function pointer. Thus, a native binding is really just a global array variable, and now I must obviously give it a (preferably good) name. In C, it's idiomatic to put one's own functions in a "namespace" by prepending a custom prefix to function names, as in myscript_parse_source() or myscript_run_bytecode(). The custom name shall ideally describe the name of the library which it is part of. Here arises the confusion. Let's say I'm writing a binding for libcURL. In this case, it seems reasonable to call my extension library curl_myscript_binding, like this: MYSCRIPT_API const MyScriptExtFunc curl_myscript_lib[10]; But now this collides with the curl namespace. (I have even thought about calling it curlmyscript_lib but unfortunately, libcURL does not exclusively use the curl_ prefix -- the public APIs contain macros like CURLCODE_* and CURLOPT_*, so I assume this would clutter the namespace as well.) Another option would be to declare it as myscript_curl_lib, but that's good only as long as I'm the only one who writes bindings (since I know what I am doing with my namespace). As soon as other contributors start to add their own native bindings, they now clutter the myscript namespace. (I've done some research, and it seems that for example the Perl cURL binding follows this pattern. Not sure what I should think about that...) So how do you suggest I name my variables? Are there any general guidelines that should be followed?

  Read the article

• How to Archive, Search, and View Your Tweet Statistics with ThinkUp

  - by YatriTrivedi

  Worried about archiving your tweets? Want a more powerful search? Want to see your tweet statistics? You can do all of that and more by installing ThinkUp on your home server. ThinkUp is a brilliant application (currently in beta) that will archive all of your tweets, your replies, responses, etc. so that you can search through them and find out some helpful usage statistics. It has quite a few plugins, including one that adds full Facebook support, too. It’s designed to be installed on a LAMP server; that is, Linux, Apache, MySQL, and PHP is what will provide the backbone for it. While it’s possible to install it on a Windows- or Mac-based machine, it’s most easily handled in Linux, so we’ll be using Ubuntu to show you how to get it up and running. It’s in very active development by the founder, Gina Trapani, and by many users in the community Latest Features How-To Geek ETC How to Recover that Photo, Picture or File You Deleted Accidentally How To Colorize Black and White Vintage Photographs in Photoshop How To Get SSH Command-Line Access to Windows 7 Using Cygwin The How-To Geek Video Guide to Using Windows 7 Speech Recognition How To Create Your Own Custom ASCII Art from Any Image How To Process Camera Raw Without Paying for Adobe Photoshop What is the Internet? From the Today Show January 1994 [Historical Video] Take Screenshots and Edit Them in Chrome and Iron Using Aviary Screen Capture Run Android 3.0 on a Hacked Nook Google Art Project Takes You Inside World Famous Museums Emerald Waves and Moody Skies Wallpaper Change Your MAC Address to Avoid Free Internet Restrictions

  Read the article

< Previous Page | 467 468 469 470 471 472 473 474 475 476 477 478  | Next Page >