Search Results

Search found 18842 results on 754 pages for 'machine'.

Page 491/754 | < Previous Page | 487 488 489 490 491 492 493 494 495 496 497 498  | Next Page >

  • recent unreliable wireless connection

    - by gabkdlly
    Recently, my internet connection over wireless ( via a Netgear KWGR614 router ) has become unreliable, on both a Dell laptop running Ubuntu 10.04 as well as my Desktop running Ubuntu 10.10 . The problem does not seem to occur on a laptop running Windows Vista, nor on a Desktop running Windows 7 ( this machine is connected with an ethernet cable ). The problem does not seem to occur on my Openmoko Freerunner ( running Android 1.5 ), though I hardly ever use this device to connect over WLAN, so the problem may have just slipped by. On my main Ubuntu Desktop, I have tried the following wireless devices: a Longshine PCI card ( an old device with an RTL8180L chip ) a D-Link DWL-510 PCI card ( this device threw warnings in dmesg ) a USB device from MSI ( US54EX ). Usually my wireless network shows up in the network manager with a normal signal strength, even when the connection speed is slow or the connection gets reset ( asking me to click connect to re-authenticate my wireless connection ). I have observed this problem with a Netgear KWGR614 Router ( with the manufacturers firmware ), as well as with a TP-LINK TL-WR741ND router running OpenWrt. Taking a look at my routers logs, I find many instances of the following line: Tuesday,04 Jan 2011 03:53:01 [TCP SYN Flood][Deny access policy matched, dropping packet] I know that the Netgear router is susceptible to denial of service attacks, as I have previously been able to disrupt its operation by putting an nmap scan into a while loop. I use WEP or WPA to encrypt the wireless network. Is it possible that someone is jamming my signal ?

    Read the article

  • Adobe Illustrator - Objects are Expanded on Restart

    - by Shatou Dev
    I use Adobe Illustrator extensively for mobile development. For example, for Android app, I have many illustrations with different densities and sizes. I use many effects such as outer glow, round corners and such. However, sometimes, when I close the .ai file and re-open it later, I found all my objects expanded. Effects are expanded. For example, the round corner effect is now expanded and I cannot re-size any object. I am using a MacBook Pro. I am suspecting both Time Machine and Dropbox. As much as I can recall, it also appears with CS6 version, not CS5.

    Read the article

  • I have a server running Windows 2008 R2 Core and it needs to hosts either SVN or GIT

    - by Jason Adams
    The server allocated for our cross platform projects (both Mac & PC) source repository is running Win2008R2 Core. We're really happy with its stability and we aren't interested in moving over to non-core. We need to get either SVN or GIT installed on the aforementioned box in the shortest amount of steps. We know the advantages/disadvantages of both systems. That being said, we don't care which one we use, we're just are looking for the path of least resistance on setting up a repository on a machine running R2 core.

    Read the article

  • Unable to log into samba server

    - by Paddington
    I am unable to log into a samba server (running on fedora core 6) as it prompts for a username and password when I try to connect to the mapped drives from my windows 7 machine. I decided to reset the password using the command smbpassword paddy and when I list users using check the pdbedit -L -v I see that the password was updated at the time I made this change. However, I am still unable to log in. The log file in /var/log/samba/log.paddy shows: [2012/10/11 09:55:54.605923, 1] smbd/service.c:678(make_connection_snum) create_connection_server_info failed: NT_STATUS_ACCESS_DENIED [2012/10/11 09:55:54.606635, 1] smbd/service.c:678(make_connection_snum) create_connection_server_info failed: NT_STATUS_ACCESS_DENIED How can I resolve this so that I can log in?

    Read the article

  • Newbie: VirtualBox "no bootable medium found"

    - by Newton Falls
    My first foray into VM land so please excuse the stupidity expressed below. Running VirtualBox on Kubuntu 9.10 and trying to set up a VM running Windows 7. Windows 7 came installed and is functional as a dual-boot but I want to stay in kubuntu hence the VM. Received "Fatal: no bootable medium found" when trying to start a VM. Not surprising since VBox never gave me an option (that I recognized anyway) to tell it to look on the hard drive. I did not receive a CD of Windows 7 with the machine. How can I tell VirtualBox to grab what it needs from the hard drive? Or am I out of luck because I don't have a CD? Update: This might not be possible. The installed Windows 7 is useful only to pull the installation key. It is easier to just to download or get an ISO from a friend and enter in your own key.

    Read the article

  • In Windows XP, is it possible to disable user credential caching for particular users

    - by kdt
    I understand that when windows caches user credentials, these can sometimes be used by malicious parties to access other machines once a machine containing cached credentials is compromised, a method known as "pass the hash"[1]. For this reason I would like to get control over what's cached to reduce the risk of cached credentials being used maliciously. It is possible to prevent all caching by zeroing HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\CachedLogonsCount, but this is too indiscriminate: laptops users need to be able to login when away from the network. What I would like to do is prevent the caching of credentials of certain users, such as administrators -- is there any way to do that in Windows XP? http://www.lbl.gov/cyber/systems/pass-the-hash.html

    Read the article

  • Host a SSTP VPN Server on Windows 8

    - by Maarten
    I have a small server computer running Windows 8 at home. Currently it is hosting a PPTP VPN server using the build-in Windows 8 functionality for that. What I would want is something more secure, like an SSTP VPN server. However, I can't find any functionality of windows 8 or 3rd party software that can HOST a SSTP vpn server on Windows 8. I've only seen Client stuff and vpn pass trough services via google, all which i don't want/need. The only HOST stuff i find via google is the PPTP i set up currently. Is there any way of hosting a SSTP VPN server on my home machine? Thanks in advance, Maarten

    Read the article

  • how to set auto redirection in tomcat

    - by Registered User
    I have a site http://social.openitup.in right now what you are seeing is a default Tomcat6 page. I am using mod_ajp as a front end and Apache vhost configuration for same is <VirtualHost *:80 > ServerName social.openitup.in ServerAdmin webmaster@localhost ProxyRequests off <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPreserveHost On ProxyPass / ajp://192.168.1.19:8009/ ProxyPassReverse / ajp://192.168.1.19:8009/ </VirtualHost> How ever I have an application running on it http://social.openitup.in/olat what I want to do is when some one opens http://social.openitup.in then rather than seeing Tomcat6 home page from /var/lib/tomcat6/webapps/ROOT/index.html the person is redirected to olat application which is in /var/lib/tomcat6/webapps/olat how can this be achived? The above vhost configuration is on a machine separate than where OLAT is running.

    Read the article

  • How do you have one IP address and many websites?

    - by johnny
    Hi, How can I have it where I have one IP address that sits on the Internet but many web names? For example, when a hosting company has a shared IP but I get unlimited domain names (along with everyone else on that box). I have a box on the Internet but I want to point to another machine that holds a different website when someone types in the different www...(it's sitting right next to it in just a different box). Is that all subdomaining? Thank you. EDIT: I am the hosting company.

    Read the article

  • Keepalived with apache unable to bind interface on Backup server

    - by davideagle
    I have two debian 6 servers running keepalived 1.1.20 with one server acting as a Master and the other as a Backup. Both servers host apache 2.4 that have a global Listener on all interfaces on port 80 (Listen *:80) how ever I have some sites that require a listener for port 443 (SSL) and that is configured for each VirtualHost in the Apache config since I do not want every VirtualHost to listen on port 443. The problem is when I try to start Apache on the Backup machine that does not hold the virtual interface the VirtualHost is supposed to be listening on, I get AH00072: make_sock: could not bind to address 1.1.1.1:443. I know this is expected behavior of Apache. The real question is are there any known workarounds or solutions to this scenario?

    Read the article

  • Online Windows Server Virtual Hard Drive Images for Use with VMWare Server 1.0

    - by charfeddine.ahmed
    Hello there, I have a remote Server running the VMWare hypervisor. I want to create a virtual machine running Windows Server. However I can't upload mine since my internet connection is slow (would take me days to do the upload). Microsoft has public hard drive images with Windows Server Trial on them, but they work for Virtual PC. I am looking for such files that can be used with VMWare Server. That case I can download these files directly to the server which enjoys a fast connection. Thanks in advance.

    Read the article

  • Able to ping but does not get the data

    - by Dany
    I am facing a problem in my client server program; when using wireless I can ping but not receive any data. There is a source which receives a streaming request from client via server. This works fine when all the machines are connected through LAN cable but when I put all the computers in wi-fi network, all the machine are able to ping each other but when the client send the stream request to the server the ping request between server and client says destination unreachable. It works all well until the client does not send the streaming request. What might be the issue?

    Read the article

  • IIS FTP service - download timeouts and restarts getting the data twice

    - by accel229
    We have an IIS FTP site on a Windows Server 2003 x64 machine. Application Layer Gateway service is disabled (so http://support.microsoft.com/kb/931130 does not apply). Windows Firewall service is disabled as well. Connection timeout for the FTP site (there is only one) is set to 1,200 seconds = 20 minutes. An external client can connect to the site, list directory contents and download small files. When a client attempts to download a large file (eg, if the download continues for 3 minutes, which is still under 20 minutes, but relatively long), the server sends all data, then the connection times out, the client issues REST / RETR commands attempting to restart the download since after the last byte (which I believe should succeed and receive exactly 0 bytes), and the server behaves as if the client tried to restart after byte 0, that is, it sends the entire file all over. Any ideas on how to fix this?

    Read the article

  • Accessing a shared folder using other credentials with Windows 7

    - by Nicolas Buduroi
    I was at a client office trying to connect to a shared drive on their network but was greeted by a "you do not have permission to access" error! Couldn't find any way to enter the required credentials as this message didn't had any other options. Tried to map the drive, selected the option to enter the correct credentials (with \\HOST\user) but it wouldn't work at all. The worst thing in all of this is that my coworker who is using OS X has been able to connect to that drive without any problem, he clicked on it, entered the credentials and could open the folder! The folder is shared by a Windows Small Business Server 2008 machine.

    Read the article

  • Problems connecting Centos on VMware to the network using bridged connection.

    - by Sakin
    Hi, I installed CentOs on VMware running on windows XP. When trying to configure it to connect to the internet in a bridged configuration, I get an error message when trying to bring up the network interface: [root@VMLinux ~]# /et/init.d/network start Bringing up loopback interface: [ OK ] Bringing up interface eth0: Determining IP information for eth0... failed [FAILED] VM is running on a machine that has access to the network, I tried it on two different networks that have DHCP enabled. Everything works fine when using a NAT connection through my host. How can I make the bridge work for me? Thanks.

    Read the article

  • Major permission repair needed on Mac Os

    - by Luke1111
    I made the fatal error of copying and pasting a sudo command into my terminal without double checking it, here it is. sudo -R mysql / What this does (for those that don't know) is recursively change the owner every file from the root down to mysql!! obviously not what i was intending This has of course played havoc with my system, the first thing i did was the apple permission repair but that only works for files that it has an idea of though it has changed a lot of file ownerships back to root. It seems that many library files are still owned incorrectly, as a lot of problems don't work. What i propose doing as a temporary fix until i can reinstall mountain lion is to recursively set all ownerships that are mysql to Luke. I'm not sure what they should precisely but this is still better than nothing. Is this possible using a shell script? I realise that this won't fix the problem properly and i will have to reformat but i need the machine in a workable state just for this week.

    Read the article

  • How do I create certificates for both ends of an stunnel connection?

    - by unixman83
    Hi. I am using stunnel to authenticate RDP (Remote Desktop) and I need to verify that a client possesses the proper credentials. So people cannot brute force into the machine. I am also using a bad (outdated) version of RDP that has security vulnerabilities, so stunnel is a must. I will preshare the necessary .pem's between machines. What are the openssl commands I need to create the right .pem files on both the client and on the server? What files need to be shared?

    Read the article

  • Disable NSS LDAP IPv6 (AAAA) lookups

    - by pilcrow
    Question: How can I disable inet6 AAAA queries for my LDAP server during (LDAP-backed) NSS lookups on a CentOS (RHEL) 5 machine? Background: I've servers configured to consult ldap://ldap.internal for NSS passwd and group lookups. Every relevant NSS lookup, for example the getpwuid(3) implied by an ls -l which needs to translate UIDs to network user names, performs the following DNS dance before connecting to the ldap server: AAAA? ldap.internal -> (no records) AAAA? ldap.internal.internal -> NXDomain A? ldap.internal -> 192.168.3.89 I'd like to skip the first two queries completely. Configuration: [server]$ cat /etc/redhat-release CentOS release 5.4 (Final) [server]$ grep ^passwd /etc/nsswitch.conf passwd: files ldap [server]$ grep ^uri /etc/ldap.conf uri ldap://ldap.internal/ For what it's worth, IPv6 support is otherwise disabled on these systems: [server]$ grep off /etc/modprobe.conf alias ipv6 off alias net-pf-10 off [server]$ echo "$(ip a | grep -c inet6) IPv6-enabled interfaces" 0 IPv6-enabled interfaces

    Read the article

  • Best Usage of Multiple Computers For a Developer

    - by whaley
    I have two Macbook Pros - both are comparable in hardware. One is a 17" and the other a 15". The 17" has a slightly swifter CPU clock speed, but beyond that the differences are completely negligible. I tried a setup a while back where I had the 17" hooked up to an external monitor in the middle of my desk with the 15" laptop immediately to the right of it, and was using teleport to control the 15" from my 17". All development, terminal usage, etc. etc. was being done on the 17" and the 15" was primarily used for email / IM / IRC... or anything secondary to what I was working on. I have a MobileMe account so preferences were synced, but otherwise I didn't really use anything else to keep the computers in sync (I use dropbox/git but probably not optimally). For reasons I can't put my finger on, this setup never felt quite right. A few things that irked me was the 15" was way under-utlized and the 17" was overutilized having 2 laptops and a 21" monitor all on one desk actually took up lots of desk space and it felt like I had too much to look at. I reverted back to just using the 17" and the external monitor and keeping the 15" around the house (and using it very sparingly). For those of you who are using multiple laptops (or just multiple machines for that matter), I'd like to see setups that work for you for when you have 2 or more machines that gives you optimal productivity and why. I'd like to give this one more shot but with a different approach than my previous - which was using the 15" as a machine for secondary things (communication, reading documentation, etc. etc).

    Read the article

  • Are .NET versions backwards compatible?

    - by Boden
    Over the years various versions of .NET have been deployed to my client machines via WSUS. Now it seems that on many machines these installations have hosed eachother, and certain .NET security updates are failing. I verified that I can run the .NET cleanup tool to get rid of all the .NET installations on a client, and I can then push out .NET 3.5 via WSUS. This seems to have solved the problems I'm having on the machine I tried it on. So the question is: if I've got .NET 3.5, is there any reason to also have previous versions installed?

    Read the article

  • Cannot deploy reports on localhost/reports

    - by Jackson Sunuwar
    I am using Microsoft SQL Server 2008 R2, Sql Server Reporting Services(SSRS) on an xp virtual machine.. I have created a report and am trying to deploy it... but getting this error... The specified report server URL http://localhost/Reports could not be found. Verify the syntax of the URL and that the report server exists. I went to see my "services".... SQL Server (SQLEXPRESS) is "started", but SQL Server (MSSQLSERVER) is not. When I try to start it, it says windows could not start the sql server on local computer error code 10048 I tried to go in cmd and tried C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Binn\sqlservr.exe -sMSSQLSERVER I get this, Server Error: 17058, Severity: 16, State: 1. can someone please help me...

    Read the article

  • Is an eee-pc with an Atom N550 dual core OK for Rails 3 development?

    - by dan
    I'm buying an Asus eee-pc 1015PEM and hope to do test-driven Rails 3 development on it. Is the CPU fast enough or too painfully slow for this? I plan on installing Ubuntu. I currently develop on a 11 inch Macbook Air 2010 model. It works fine as a Rails development machine. But for some reason I'm drawn to developing on a cheap little netbook. I don't use any IDE's, and my development workflow is mostly switching between Vim, Gnu Screen, and bash.

    Read the article

  • Cannot Boot, How to recover

    - by Kendor
    Am running 11.10 64-bit with Gnome-shell. Something happened late Friday whereby my machine never gets to the login screen. I do get to an Ubuntu splash logo, after that I get a text screen that it hangs on. The screen is referring to issues with mounting various network resources, including VMWare and also some references to my NAS that are in fstab. If I hit "esc" I can get to the GRUB menu and into recovery console. If I try to do a file system check, I run into a similar error screen that I see when trying to boot normally. A possible clue here is that during my last good session I made some mods to the /etc/hosts file to reference another system which I'm connecting to with Synergy. I don't believe I have hardware issues as I'm able to boot properly with a Live USB and connect to my network/Internet. A few more tidbits. I have regular Dejadups backups on my NAS. I have a good Clonezilla whole drive image which is 4-6 weeks old.. My home is encrypted. I thought I'd try blowing away my hosts file via live USB, but when I mounted the hard drive everything was read-only and I couldn't figure out how to replace it. P.S. I logged in via CLI and modded the host file to remove the entry I'd made, to no avail. System continue to gets stuck on the following: CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel version 3.1s Would love some sober advice on how to attack this.

    Read the article

  • Can't write to disk

    - by nofacts
    I have seen questions similar to this, but the answers are either beyond me or the situation doesn't quite match mine. Would appreciate some direction. I recently installed Ubuntu 12.04 LTS. The OS is on a disk formatted as ext4. I added another disk to the system and formatted it as W95 FAT 32 (LBA) (0x0c). I did this because I am moving from Windows to Linux, will be needing to go back and forth with data for a while, and might need to move the disk to a Windows machine. There may have been a better format to use, but if so I didn't know any better. I was able to transfer data from an external drive to this FAT32 drive with no problem. Now, though, when I try to create a new folder or write a file to the disk I get a message that the disk is read-only. If I go to the properties, permissions for the disk, for Folder Access it says 'create and delete files'. If I try to change File Access underneath to 'read and write', either nothing happens or I get a message it can't be done. Thank you for any help.

    Read the article

  • Understanding why a 450W power supply is destroying my ATX motherboards but not mATX

    - by T. Webster
    Maybe I'm missing something really obvious here, but after going through 3 new motherboards in trying to build my new machine, I'm finally certain that the 450W power supply I bought has been destroying them. It seems like it should be simple: just connect the connectors where they fit and switch the thing on. But today after hooking it to my ASUS Sabertooth 990FX TUF Series Motherboard and switching it on, I could see and smell the smoke coming out of the motherboard. What I don't get is why I can hook this same 450W power supply up to my mATX motherboard and not run into the same problem. What am I missing here? Where on the box or manual is this? (I have 8x2 GB RAM, AMD FX-4100 3.6GHz CPU, 1 512MB ATI graphics card, 1 WD 7200 RPM SATA hard drive. )

    Read the article

< Previous Page | 487 488 489 490 491 492 493 494 495 496 497 498  | Next Page >