Search Results

Search found 13563 results on 543 pages for 'condition variable'.

Page 501/543 | < Previous Page | 497 498 499 500 501 502 503 504 505 506 507 508  | Next Page >

• Trouble with Debian Lenny and Sphinx

  - by Ando

  I've very basic understanding of linux systems, but I've a server which was setup a while ago to host some web apps. Recently I decided to test out and implement Sphinx but unfortunately I cant get the install to work. I'm running a Debian Lenny distro and when I try to install sphinx it says - checking MySQL include files... configure: error: missing include files. ****************************************************************************** ERROR: cannot find MySQL include files. Check that you do have MySQL include files installed. The package name is typically 'mysql-devel'. If include files are installed on your system, but you are still getting this message, you should do one of the following: 1) either specify includes location explicitly, using --with-mysql-includes; 2) or specify MySQL installation root location explicitly, using --with-mysql; 3) or make sure that the path to 'mysql_config' program is listed in your PATH environment variable. To disable MySQL support, use --without-mysql option. ****************************************************************************** I do have mysql 5.1 installed but I can't find the include files, AND one more thing.. I read around the net that I probably need libmysqlclient15-dev but when I try to install that using apt-get i receive the following error. The following packages were automatically installed and are no longer required: libxcb-aux0 libts-0.0-0 libxcb-atom1 ttf-dejavu-extra hunspell-en-us g++-4.3 libmysql++3 libnspr4-0d libdirectfb-1.0-0 libxcb-event1 libasound2 libstdc++6-4.3-dev libhunspell-1.2-0 ttf-dejavu libmozjs2d conkeror-spawn-process-helper libnss3-1d Use 'apt-get autoremove' to remove them. The following NEW packages will be installed: libmysqlclient15-dev 0 upgraded, 1 newly installed, 0 to remove and 276 not upgraded. Need to get 7590 kB of archives. After this operation, 26.3 MB of additional disk space will be used. WARNING: The following packages cannot be authenticated! libmysqlclient15-dev Install these packages without verification [y/N]? Y Err http://ftp.us.debian.org/debian/ lenny/main libmysqlclient15-dev amd64 5.0.51a-24+lenny5 404 Not Found [IP: 35.9.37.225 80] Err http://security.debian.org/ lenny/updates/main libmysqlclient15-dev amd64 5.0.51a-24+lenny5 404 Not Found [IP: 149.20.20.6 80] Failed to fetch http://security.debian.org/pool/updates/main/m/mysql-dfsg-5.0/libmysqlclient15-dev_5.0.51a-24+lenny5_amd64.deb 404 Not Found [IP: 149.20.20.6 80] E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? Can you help me out by suggesting how to install the required packages and run the Sphinx.

  Read the article

• Updating the $PATH for running an command through SSH with LDAP user account

  - by Guillaume Bodi

  Hi all, I am setting up a Mac OSX 1.6 server to host Git repositories. As such we need to push commits to the server through SSH. The server has only an admin account and uses a user list from a LDAP server. Now, since it is accessing the server through a non interactive shell, git operations are not able to complete since git executables are not in the default path. As the users are network users, they do not have a local home folder. So I cannot use a ~/.bashrc and the like solution. I browsed over several articles here and there but could not get it working in a nice and clean setup. Here are the infos on the methods I gathered so far: I could update the default PATH environment to include the git executables folder. However, I could not manage to do it successfully. Updating /etc/paths didn't change anything and since it's not an interactive shell, /etc/profile and /etc/bashrc are ignored. From the ssh manpage, I read that a BASH_ENV variable can be set to get an optional script to be executed. However I cannot figure how to set it system wide on the server. If it needs to be set up on the client machine, this is not an acceptable solution. If someone has some info on how it is supposed to be done, please, by all means! I can fix this problem by creating a .bashrc with PATH correction in the system root (since all network users would start here as they do not have home). But it just feels wrong. Additionally, if we do create a home folder for an user, then the git command would fail again. I can install a third party application to set up hooks on the login and then run a script creating a home directory with the necessary path corrections. This smells like a backyard tinkering and duct tape solution. I can install a small script on the server and ForceCommand the sshd to this script on login. This script will then look for a command to execute ($SSH_ORIGINAL_COMMAND) and trigger a login shell to run this command, or just trigger a regular login shell for an interactive session. The full details of this method can be found here: http://marc.info/?l=git&m=121378876831164 The last one is the best method I found so far. Any suggestions on how to deal with this properly?

  Read the article

• Bad disks in ancient server

  - by Joel Coel

  I have a 1998-era Netware 3.12 server that runs everything on our campus: general ledger, purchasing, payroll, student information, grades, you name it. The server has an Adaptec RAID controller with two volumes: RAID 1, 2 17GB scsi disks, Seagate ST318417W RAID 5, 3 4GB scsi disks, 2 Seagate ST34573W and 1 ST34572W. We are currently in the early stages of a project to replace this system, but you don't just jump into a new system like that and so I need to keep this server running until at least November 2011. This week we had not one but two hard drives fail. Thankfully they are from different volumes and we're able to keep running for the moment, but given the close nature of these failures I have serious doubts that I'll be able to avoid catastrophic failure from this server through the November target as is without restoring the RAID redundancy — it'll only take one more drive failure anywhere and I'm completely hosed. We are fortunate enough to have exact match "spares" lying around for both drives, but the spares are in unknown condition. I tried swapping just them in, but the RAID controller isn't smart enough to handle this and it renders the system unbootable. As for the RAID controller itself, there is utility I can get into during POST via a Ctrl-A shortcut, but I can't do much useful from there. To actually manage volumes I must first boot in to Netware, at which point I can use CI/O Array Management Software Version 2.0 to actually look at volume information. I suspect that the normal way to manage things is to boot from a special floppy with the controller software on it, but that floppy is long gone. Going through the options in the RAID software, I think the only supported way to replace a disk in an existing RAID volume is to physically add the disk, boot up and configure it as a "spare" for a volume, force the volume to use the spare to replace an existing down disk (and at this point I'm only guessing) so that the down disk becomes the spare, repair the volume, remove the spare from the volume, and then shut down and remove the disk. Then start all over for the other failed disk. All this amounts to a lot of downtime, assuming I can even make it work and that my spares are any good. As for finding reliable spares, I have no clue where to even begin looking to find a new 4GB scsi drive, or even which exact scsi system I'm looking for, as it's gone through a few different iterations over time. Another option is to migrate this to a virtual machine (hyper-v), but all previous attempts we've made in this area have failed to get very far. When this machine was installed I was just graduating from high school, and so it requires lower level knowledge of netware and dos than I ever developed, or if I did have since forgotten (I'm not exactly a dos neophyte, either). Part of my problem is this is a high-use server, and taking it down for a few days to figure things out isn't gonna fly very well. As for the question, I'm looking for anything that might be helpful in this situation: a recommendation on a place to find good spares from this era, personal experience repairing RAID volumes using a similar controller or building a hyper-v vm from an old netware server, a line on a floppy with better software for the RAID controller, recommendation on a good Novell consultant in Nebraska that would be able to put things right, a whole other option I haven't considered yet, etc. Update: For backups, we have good (recently verified via restore) backups of the data only -- nothing for the software that actually runs things. Update 2: Just a progress report that I currently have a working Netware 3.12 install in VMWare Virtual Server 2.0, thanks largely to the guide I found here: http://cerbulescubogdan.blogspot.com/2010/11/novell-netware-312-on-vmware.html The next steps are preparing empty netware volumes to match the additional volumes on my existing server, taking a dump of everything on the C:\ drive and netware volumes on my existing server, and figuring out from that information what modules need added to netware, installing my licenses (we do still have that disk, if it's any good), and moving data over. I have approval to bring the server down for a week after the first of the year (sadly not before), so, aside from creating empty volumes, the rest of the work will have to wait until then. Final Update (Jan 5, 2011): I was able to get spares working in both raid arrays without data loss this week. Both are now listed by the controller as "FAULT TOLLERANT" (yay!). I was also able to build on the progress from my last update and now have a functional "spare" server in VMWare Server 2.0. The spare can run and use our erp software, but I can't put it into production because I can't (yet) print from that box (and I have no idea why). Even so, this VM will do in a pinch if I have no other choice, and between it and the repaired RAID arrays I'm comfortable pushing on until I can junk the machine in November.

  Read the article

• batch file infinite loop when parsing file

  - by Bart

  Okay, this should be a really simple task but its proving to be more complicated than I think it should be. I'm clearly doing something wrong, and would like someone else's input. What I would like to do is parse through a file containing paths to directories and set permissions on those directories. An example line of the input file. There are several lines, all formatted the same way, with a different path to a directory. E:\stuff\Things\something else (X)\ (The file in question is generated under Cygwin using find to list all directories with "(X)" in the name. The file is then passed through unix2win to make it windows compatible. I've also tried manually creating the input file from within windows to rule out the file's creation method as the problem.) Here's where I'm stuck... I wrote the following quick and dirty batch file in Windows XP and it worked without any issues at all, but it will not work in server 2k8. Batch file code to run through the file and set permissions: FOR /F "tokens=*" %%A IN (dirlist.txt) DO echo y| cacls "%%A" /T /C /G "Domain Admins":f "Some Group":f "some-security-group":f What this is SUPPOSED to do (and does in XP) is loop through the specified file (dirlist.txt) and run cacls.exe on each directory it pulls from the file. The "echo y|" is in there to automagically confirm when cacls helpfully asks "are you sure?" for every directory in the list. Unfortunately, however, what it DOES is fall into an infinite loop. I've tried surrounding everything after "DO" with quotes, which prevents the endless loop but confuses cacls so it throws an error. Interestingly, I've tried running the code from after "DO" manually (obviously replacing the variable with the full path, copied straight from the file) at a command prompt and it runs as expected. I don't think it's the file or the loop, as adding quotes to the command to be executed prevents the loop from continuing past where it's supposed to... I really have no idea at this point. Any help would be appreciated. I have a feeling it's going to be something increadibly stupid... but I'm pulling my hair out so I thought I'd ask.

  Read the article

• How can a single disk in a hardware SATA RAID-10 array bring the entire array to a screeching halt?

  - by Stu Thompson

  Prelude: I'm a code-monkey that's increasingly taken on SysAdmin duties for my small company. My code is our product, and increasingly we provide the same app as SaaS. About 18 months ago I moved our servers from a premium hosting centric vendor to a barebones rack pusher in a tier IV data center. (Literally across the street.) This ment doing much more ourselves--things like networking, storage and monitoring. As part the big move, to replace our leased direct attached storage from the hosting company, I built a 9TB two-node NAS based on SuperMicro chassises, 3ware RAID cards, Ubuntu 10.04, two dozen SATA disks, DRBD and . It's all lovingly documented in three blog posts: Building up & testing a new 9TB SATA RAID10 NFSv4 NAS: Part I, Part II and Part III. We also setup a Cacit monitoring system. Recently we've been adding more and more data points, like SMART values. I could not have done all this without the awesome boffins at ServerFault. It's been a fun and educational experience. My boss is happy (we saved bucket loads of $$$), our customers are happy (storage costs are down), I'm happy (fun, fun, fun). Until yesterday. Outage & Recovery: Some time after lunch we started getting reports of sluggish performance from our application, an on-demand streaming media CMS. About the same time our Cacti monitoring system sent a blizzard of emails. One of the more telling alerts was a graph of iostat await. Performance became so degraded that Pingdom began sending "server down" notifications. The overall load was moderate, there was not traffic spike. After logging onto the application servers, NFS clients of the NAS, I confirmed that just about everything was experiencing highly intermittent and insanely long IO wait times. And once I hopped onto the primary NAS node itself, the same delays were evident when trying to navigate the problem array's file system. Time to fail over, that went well. Within 20 minuts everything was confirmed to be back up and running perfectly. Post-Mortem: After any and all system failures I perform a post-mortem to determine the cause of the failure. First thing I did was ssh back into the box and start reviewing logs. It was offline, completely. Time for a trip to the data center. Hardware reset, backup an and running. In /var/syslog I found this scary looking entry: Nov 15 06:49:44 umbilo smartd[2827]: Device: /dev/twa0 [3ware_disk_00], 6 Currently unreadable (pending) sectors Nov 15 06:49:44 umbilo smartd[2827]: Device: /dev/twa0 [3ware_disk_07], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 171 to 170 Nov 15 06:49:45 umbilo smartd[2827]: Device: /dev/twa0 [3ware_disk_10], 16 Currently unreadable (pending) sectors Nov 15 06:49:45 umbilo smartd[2827]: Device: /dev/twa0 [3ware_disk_10], 4 Offline uncorrectable sectors Nov 15 06:49:45 umbilo smartd[2827]: Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error Nov 15 06:49:45 umbilo smartd[2827]: # 1 Short offline Completed: read failure 90% 6576 3421766910 Nov 15 06:49:45 umbilo smartd[2827]: # 2 Short offline Completed: read failure 90% 6087 3421766910 Nov 15 06:49:45 umbilo smartd[2827]: # 3 Short offline Completed: read failure 10% 5901 656821791 Nov 15 06:49:45 umbilo smartd[2827]: # 4 Short offline Completed: read failure 90% 5818 651637856 Nov 15 06:49:45 umbilo smartd[2827]: So I went to check the Cacti graphs for the disks in the array. Here we see that, yes, disk 7 is slipping away just like syslog says it is. But we also see that disk 8's SMART Read Erros are fluctuating. There are no messages about disk 8 in syslog. More interesting is that the fluctuating values for disk 8 directly correlate to the high IO wait times! My interpretation is that: Disk 8 is experiencing an odd hardware fault that results in intermittent long operation times. Somehow this fault condition on the disk is locking up the entire array Maybe there is a more accurate or correct description, but the net result has been that the one disk is impacting the performance of the whole array. The Question(s) How can a single disk in a hardware SATA RAID-10 array bring the entire array to a screeching halt? Am I being naïve to think that the RAID card should have dealt with this? How can I prevent a single misbehaving disk from impacting the entire array? Am I missing something?

  Read the article

• Wireless Network Performance Issues

  - by colithium

  My brand new Dell XPS system has been running flawlessly except its abysmal download speeds. I have tried isolating every variable I could possibly think of but I can't figure out the problem. I've talked to Dell and Belkin without making progress (thought I'd try). Here are the speeds: Note that most of the time, upload speeds are actually much faster than download speeds (around 4.0 Mb/s which is better than most other devices on the network) It's not the ISP. The slowdown happens even when transferring files inside the network. Plus every other wireless device gets approximately this: It's not the wireless router. It's a Lynksis WRT160N v1 with the latest firmware (1.02.2). Plus everything else connected to it has normal speeds. It's not the browser. Speeds are the same in IE, FF, and when transferring files with Windows between computers. It's not the wireless adapter. I've tried a Belkin N Wireless USB Adapter (which works fine on another computer) and a Dell Wireless Draft 802.11n WLAN Mini-Card. They have the same slow speeds when connected to the problem computer. It's not the adapter connection. One adapter used USB and the other is a Mini-Card. It's not antenna placement. With the same antenna position and the same device, I get different speeds when connected to the problem computer vs a good computer. Plus everything reports the connection speed as at least 11Mbps and good signal strength. I've tried disabling IPv6 since it sometimes causes weird problems. I've tried disabling Windows Firewall/anti-virus. I've ensured the computer has updated drivers for both adapters. I've ensured that Windows is up to date and so is the BIOS. For the USB adapter I ensured that that USB port functioned at normal speeds with other USB devices. What else could it possibly be? I finally received my copy of Windows 7 and will be trying that. I'd rather not install Windows 7 because of a particular program that will stop working so a solution besides that is welcome. Specs: Vista x64 Core i7 920 6GB RAM 500GB HD GTX 260

  Read the article

• Nagios shell script cannot be executed

  - by MeinAccount

  I'm trying to monitor GitLab with nagios. I've created the following command definition and shell script but when checking the service I'm receiving the following e-mail. How can I solve this? The file is executable. [...] nagios : 3 incorrect password attempts ; TTY=unknown ; PWD=/ ; USER=git ; COMMAND=/bin/bash -c /var/lib/nagios/custom_plugins/check_gitlab.sh Command definition: define command { command_name custom_check_gitlab command_line /var/lib/nagios/custom_plugins/check_gitlab.sh } Shell script: #! /bin/sh # [...] RAILS_ENV="production" # Script variable names should be lower-case not to conflict with internal /bin/sh variables such as PATH, EDITOR or SHELL. app_root="/home/git/gitlab" app_user="git" unicorn_conf="$app_root/config/unicorn.rb" pid_path="$app_root/tmp/pids" socket_path="$app_root/tmp/sockets" web_server_pid_path="$pid_path/unicorn.pid" sidekiq_pid_path="$pid_path/sidekiq.pid" ### Here ends user configuration ### # Switch to the app_user if it is not he/she who is running the script. if [ "$USER" != "$app_user" ]; then sudo -u "$app_user" -H -i $0 "$@"; exit; fi # Switch to the gitlab path, if it fails exit with an error. if ! cd "$app_root" ; then echo "Failed to cd into $app_root, exiting!"; exit 1 fi ### Init Script functions check_pids(){ if ! mkdir -p "$pid_path"; then echo "Could not create the path $pid_path needed to store the pids." exit 1 fi # If there exists a file which should hold the value of the Unicorn pid: read it. if [ -f "$web_server_pid_path" ]; then wpid=$(cat "$web_server_pid_path") else wpid=0 fi if [ -f "$sidekiq_pid_path" ]; then spid=$(cat "$sidekiq_pid_path") else spid=0 fi } # Checks whether the different parts of the service are already running or not. check_status(){ check_pids # If the web server is running kill -0 $wpid returns true, or rather 0. # Checks of *_status should only check for == 0 or != 0, never anything else. if [ $wpid -ne 0 ]; then kill -0 "$wpid" 2>/dev/null web_status="$?" else web_status="-1" fi if [ $spid -ne 0 ]; then kill -0 "$spid" 2>/dev/null sidekiq_status="$?" else sidekiq_status="-1" fi } check_pids check_status if [ "$web_status" != "0" -a "$sidekiq_status" != "0" ]; then echo "GitLab is not running." exit 2 fi if [ "$web_status" != "0" ]; then printf "The GitLab Unicorn webserver is \033[31mnot running\033[0m.\n" exit 1 fi if [ "$sidekiq_status" != "0" ]; then printf "The GitLab Sidekiq job dispatcher is \033[31mnot running\033[0m.\n" exit 1 fi if [ "$web_status" = "0" -a "$sidekiq_status" = "0" ]; then printf "GitLab and all it's components are \033[32mup and running\033[0m.\n" exit 0 fi

  Read the article

• Automating silent software deployments on Solaris 10

  - by datSilencer

  Hello everyone. Essentially, the question I'd like to ask is related to the automation of software package deployments on Solaris 10. Specifically, I have a set of software components in tar files that run as daemon processes after being extracted and configured in the host environment. Pretty much like any server side software package out there, I need to ensure that a list of prerequisites are met before extracting and running the software. For example: Checking that certain users exists, and they are associated with one or many user groups. If not, then create them and their group associations. Checking that target application folders exist and if not, then create them with preconfigured path values defined when the package was assembled. Checking that such folders have the appropriate access control level and ownership for a certain user. If not, then set them. Checking that a set of environment variables are defined in /etc/profile, pointed to predefined path locations, added to the general $PATH environment variable, and finally exported into the user's environment. Other files include /etc/services and /etc/system. Obviously, doing this for many boxes (the goal in question) by hand can be slow and error prone. I believe a better alternative is to somehow automate this process. So far I have thought about the following options, and discarded them for one reason or another. 1) Traditional shell scripts. I've only troubleshooted these before, and I don't really have much experience with them. These would be my last resort. 2) Python scripts using the pexpect library for analyzing system command output. This was my initial choice since the target Solaris environments have it installed. However, I want to make sure that I'm not reinveting the wheel again :P. 3) Ant or Gradle scripts. They may be an option since the boxes also have java 1.5 enabled, and the fileset abstractions can be very useful. However, they may fall short when dealing with user and folder permissions checking/setting. It seems obvious to me that I'm not the first person in this situation, but I don't seem to find a utility framework geared towards this purpose. Please let me know if there's a better way to accomplish this. I thank you for your time and help.

  Read the article

• Why do I sometimes get 'sh: $'\302\211 ... ': command not found' in xterm/sh?

  - by amn

  Sometimes when I simply type a valid command like 'find ...', or anything really, I get back the following, which is completely unexpected and confusing (... is command name I type): sh: $'\302\211...': command not found There is some corruption going on I think. I don't use color in my prompt, I am using the Bash shell in POSIX mode as sh (chsh to /bin/sh and so on - $SHELL is sh). What is going on and why does this keep happening? Anything I can debug? I think this is more of an xterm issue than sh, or at least a combination of the two. Files, for context: My /etc/profile, as distributed with Arch Linux x86-64: # /etc/profile #Set our umask umask 022 # Set our default path PATH="/usr/local/sbin:/usr/local/bin:/usr/bin" export PATH # Load profiles from /etc/profile.d if test -d /etc/profile.d/; then for profile in /etc/profile.d/*.sh; do test -r "$profile" && . "$profile" done unset profile fi # Source global bash config if test "$PS1" && test "$BASH" && test -r /etc/bash.bashrc; then . /etc/bash.bashrc fi # Termcap is outdated, old, and crusty, kill it. unset TERMCAP # Man is much better than us at figuring this out unset MANPATH My /etc/shrc, which I created as a way to have sh parse some file on startup, when non-login shell. This is achieved using ENV variable set in /etc/environment with the line ENV=/etc/shrc: PS1='\u@\H \w \$ ' alias ls='ls -F --color' alias grep='grep -i --color' [ -f ~/.shrc ] && . ~/.shrc My ~/.profile, I am launching X when logging in through first virtual tty: [[ -z $DISPLAY && $XDG_VTNR -eq 1 ]] && exec xinit -- -dpi 111 My ~/.xinitc, as you can see I am using the system as a Virtual Box guest: xrdb -merge ~/.Xresources VBoxClient-all awesome & exec xterm And finally, my ~/.Xresources, no fancy stuff here I guess: *faceName: Inconsolata *faceSize: 10 xterm*VT100*translations: #override <Btn1Up>: select-end(PRIMARY, CLIPBOARD, CUT_BUFFER0) xterm*colorBDMode: true xterm*colorBD: #ff8000 xterm*cursorColor: S_red Since ~/.profile references among other things /etc/bash.bashrc, here is its content: # # /etc/bash.bashrc # # If not running interactively, don't do anything [[ $- != *i* ]] && return PS1='[\u@\h \W]\$ ' PS2='> ' PS3='> ' PS4='+ ' case ${TERM} in xterm*|rxvt*|Eterm|aterm|kterm|gnome*) PROMPT_COMMAND=${PROMPT_COMMAND:+$PROMPT_COMMAND; }'printf "\033]0;%s@%s:%s\007" "${USER}" "${HOSTNAME%%.*}" "${PWD/#$HOME/~}"' ;; screen) PROMPT_COMMAND=${PROMPT_COMMAND:+$PROMPT_COMMAND; }'printf "\033_%s@%s:%s\033\\" "${USER}" "${HOSTNAME%%.*}" "${PWD/#$HOME/~}"' ;; esac [ -r /usr/share/bash-completion/bash_completion ] && . /usr/share/bash-completion/bash_completion I have no idea what that case statement does, by the way, it does look a bit suspicious though, but then again, who am I to know.

  Read the article

• Installing and configuring Zend Framework 2 server-wide [Ubuntu] and test driving ZendSkeletonApplication

  - by kinologik

  I'm trying to have ZF2 installed for all my subdomains at once (Ubuntu 12.04). ZF2 just launched its first stable version, so I wanted to install it on my development server and finally get my hands dirty with it. I downloaded ZF2 and unzipped the files in /var/ZF2/ (which now contains Zend/[all components]). I then edited /etc/php5/apache2/php.ini and added the path to the ZF2 files: include_path = ".:/var/ZF2" I then downloaded the ZendSkeletonApplication and unzipped it in /var/www/skeleton. I know it is suggested to composer.phar to install ZF2 application, but: I don't want to make a local installation of ZF2... I want to make a server-wide installation be able to use my Zend components on all my domains/subdomains on my development server. Before using any automatic installation process, I'd really like to understand that process by doing it manually at first. Obviously, something goes wrong when I fire ZendSkeletonApplication, and I get the following when hit the following URL: http://www.myDevServer.com/skeleton/public/ Fatal error: Uncaught exception 'RuntimeException' with message 'Unable to load ZF2. Run `php composer.phar install` or define a ZF2_PATH environment variable.' in /var/www/skeleton/init_autoloader.php:48 Stack trace: #0 /var/www/skeleton/public/index.php(9): include() #1 {main} thrown in /var/www/skeleton/init_autoloader.php on line 48 I have skimmed through the docs, tutorials and the like, but there are no straight forward answer to this kind of configuration. In the official doc, in the (very short) installation chapter, I see a reference to adding an include path in PHP. But no example... http://zf2.readthedocs.org/en/latest/ref/installation.html Once you have a copy of Zend Framework available, your application needs to be able to access the framework classes found in the library folder. Though there are several ways to achieve this, your PHP include_path needs to contain the path to Zend Framework’s library. But then, when I get to the "Getting Started" chapter, it's all composer.phar and nothing else... http://zf2.readthedocs.org/en/latest/user-guide/skeleton-application.html I'm no sysAdmin, just a Zend enthusiast. I'm pretty sure this PEBKAC problem might be obvious for those who already got in ZF2 previous betas. Thanks for helping my out. EDIT: Problem was resolved, thanks to Daniel M. Just setting up ZF2_PATH in httpd.conf was all that was needed. SetEnv ZF2_PATH /var/ZF2 I also removed the include_path reference in php.ini and everything works just fine. So I have no idea why Zend suggested to include it there in their official docs.

  Read the article

• Local dns for testing websites using mobile devices

  - by Morpheu5

  Hi. I have no idea where to start from so sorry in advance if this topic has already been discussed. I usually develop web sites using my laptop as a development server, and recently I needed to test a web site using various mobile devices that can connect via wifi. Having no real AP, I set up a ad-hoc network using my laptop's wireless card and the devices can correctly browse the Internet and access the laptop's web server. The setup is as follows: subnet: 192.168.1.0/24 gateway to the Internet (wired adsl router/modem): 192.168.1.1 laptop: 192.168.1.64 (eth0, wired if connected to the gateway) and 192.168.1.32 (eth1, wifi if somewhat bridged to eth0) mobile devices (same for all, I only use one of them at any time for simplicity): 192.168.1.11 with default gw 192.168.1.1 Now, if I open either 192.168.1.32 or 192.168.1.64 from the mobile devices, I correctly get the default host of my Apache configuration. However I usually work with virtual hosts for many practical reasons, one of which being Drupal's peculiar implementation of multi-sites. For those who don't know how this works, Drupal takes the request's hostname and searches into its sites/ subdirectories for an appropriate configuration file. So, for example, suppose I request www.example.com, then Drupal would search for a config file in the following directories: sites/www.example.com/ sites/example.com/ sites/com/ sites/default/ So I decided to adopt the following style of virtual hosts: if the website I'm working on will be accessible using www.example.com I set up a sites/www.example.com/ directory and create a virtual host for local.www.example.com so Drupal have no trouble finding it. I've been told this is suboptimal from a dns point of view since I'd have to create an authoritative entry for example.com and turn Bind on only when I'm supposed to access the local copy, which is weird. However, if this is the only path I can follow, I still have some problems with Bind's configuration, as I couldn't find any guide that tells me in a clear, noob-friendly way, how to set up such an entry. On the other hand, I was wondering if I could set up an authoritative entry for local, so I could access www.example.com.local and tell in some way (which I don't even know if this is possible) Apache to put www.example.com instead of www.example.com.local in the relevant environment variable. Anyway, I have a last problem, sort of: when I launch Bind in debug mode with high verbosity, and make 192.168.1.32 as the primary dns for the devices, the output doesn't say anything about requests being made from the devices to Bind, so I'm not even sure it comes into play. As you can see, I'm a complete noob at these matters, but I'm eager to learn, so any help/pointer will be appreciated.

  Read the article

• How can I minimize the amount my router slows down my Internet connection speed?

  - by Lord Torgamus

  Background I'm working with what I assume is a pretty common Internet setup: a cable modem, a wireless router and a few Internet-connected devices. Lately, I've started being more demanding on my Internet connection, and noticed that using my router slows down my download speeds considerably. I just kind of dealt with it until Zune Marketplace on the Xbox 360 told me that a movie was going to take well over ten hours to download, and I just didn't want to wait that long. Good little scientist that I am, I tried to reduce the problem down to one variable. The test As a control, I turned off all the devices in the house that use wireless Internet, and unplugged all the wired devices except for the Xbox. I also power-cycled both the modem and the router. I then tried to download the movie again, and was told that it would still take over ten hours. Next, I unplugged the router, and connected the Xbox directly to the modem. The movie downloaded in just over one hour. As far as I can tell, this means that my ISP, other cable users near me, the remote servers, anything wireless-related and my machines' disk speeds can't be at fault. A similar experiment that replaced the Xbox with a wired laptop produced similar results. To me, this says "the router is responsible for things taking around ten times longer to download." My question I'd still prefer to use the router for a few reasons: it's a pain to connect and disconnect everything every time there's a big file to download direct connection to the modem isn't good for security only one machine can be connected directly to the modem at a time What can I do to have fast connection speeds while still using the router? I don't mind turning other machines off, as long as I don't have to mess with power and ethernet cables. EDIT : After asking this followup question and then this one, I installed dd-wrt on my router, and I seem to be getting higher and more consistent speeds. Perhaps more importantly, my memory use is fairly constant. I know this isn't an answer — which is why I'm not posting it as an answer — but it is how I resolved the situation, and hopefully it'll be helpful for someone.

  Read the article

• data validation on wpf passwordbox:type password, re-type password

  - by black sensei

  Hello Experts !! I've built a wpf windows application in with there is a registration form. Using IDataErrorInfo i could successfully bind the field to a class property and with the help of styles display meaningful information about the error to users.About the submit button i use the MultiDataTrigger with conditions (Based on a post here on stackoverflow).All went well. Now i need to do the same for the passwordbox and apparently it's not as straight forward.I found on wpftutorial an article and gave it a try but for some reason it wasn't working. i've tried another one from functionalfun. And in this Functionalfun case the properties(databind,databound) are not recognized as dependencyproperty even after i've changed their name as suggested somewhere in the comments plus i don't have an idea whether it will work for a windows application, since it's designed for web. to give you an idea here is some code on textboxes <Window.Resources> <data:General x:Key="recharge" /> <Style x:Key="validButton" TargetType="{x:Type Button}" BasedOn="{StaticResource {x:Type Button}}" > <Setter Property="IsEnabled" Value="False"/> <Style.Triggers> <MultiDataTrigger> <MultiDataTrigger.Conditions> <Condition Binding="{Binding ElementName=txtRecharge, Path=(Validation.HasError)}" Value="false" /> </MultiDataTrigger.Conditions> <Setter Property="IsEnabled" Value="True" /> </MultiDataTrigger> </Style.Triggers> </Style> <Style x:Key="txtboxerrors" TargetType="{x:Type TextBox}" BasedOn="{StaticResource {x:Type TextBox}}"> <Style.Triggers> <Trigger Property="Validation.HasError" Value="true"> <Setter Property="ToolTip" Value="{Binding RelativeSource={RelativeSource Self}, Path=(Validation.Errors)[0].ErrorContent}"/> <Setter Property="Validation.ErrorTemplate"> <Setter.Value> <ControlTemplate> <DockPanel LastChildFill="True"> <TextBlock DockPanel.Dock="Bottom" FontSize="8" FontWeight="ExtraBold" Foreground="red" Padding="5 0 0 0" Text="{Binding ElementName=showerror, Path=AdornedElement.(Validation.Errors)[0].ErrorContent}"></TextBlock> <Border BorderBrush="Red" BorderThickness="2"> <AdornedElementPlaceholder Name="showerror" /> </Border> </DockPanel> </ControlTemplate> </Setter.Value> </Setter> </Trigger> </Style.Triggers> </Style> </Window.Resources> <TextBox Margin="12,69,12,70" Name="txtRecharge" Style="{StaticResource txtboxerrors}"> <TextBox.Text> <Binding Path="Field" Source="{StaticResource recharge}" ValidatesOnDataErrors="True" UpdateSourceTrigger="PropertyChanged"> <Binding.ValidationRules> <ExceptionValidationRule /> </Binding.ValidationRules> </Binding> </TextBox.Text> </TextBox> <Button Height="23" Margin="98,0,0,12" Name="btnRecharge" VerticalAlignment="Bottom" Click="btnRecharge_Click" HorizontalAlignment="Left" Width="75" Style="{StaticResource validButton}">Recharge</Button> some C# : class General : IDataErrorInfo { private string _field; public string this[string columnName] { get { string result = null; if(columnName == "Field") { if(Util.NullOrEmtpyCheck(this._field)) { result = "Field cannot be Empty"; } } return result; } } public string Error { get { return null; } } public string Field { get { return _field; } set { _field = value; } } } So what are suggestion you guys have for me? I mean how would you go about this? how do you do this since the databinding first purpose here is not to load data onto the fields they are just (for now) for data validation. thanks for reading this.

  Read the article

• dynatree: how can i select child node programmatically

  - by Muhammad Adeel Zahid

  hello everyone i m using jquery's dynaTree in my application and i want to select the all the child nodes programmably when a node is selected. the structure of my tree is as follows <div id = "tree"> <ul> <li>package 1 <ul> <li>module 1.1 <ul> <li> document 1.1.1</li> <li> document 1.1.2</li> </ul> </li> <li>module 1.2 <ul> <li>document 1.2.1</li> <li>document 1.2.2</li> </ul> </li> </ul> </li> <li> package 2 <ul> <li> module 2.1 <ul> <li>document 2.1.1</li> <li>document 2.1.1</li> </ul> </li> </ul> </li> </ul> </div> now what i want is that when i click on tree node with title "package 1" all its child nodes i.e (module 1.1, document 1.1.1, document 1.1.2, module 1.2, document 1.2.1, document 1.2.2) should also be selected below is the approach i tried to use $("#tree").dynatree({ onSelect: function(flag, dtnode) { // This will happen each time a check box is selected/deselected var selectedNodes = dtnode.tree.getSelectedNodes(); var selectedKeys = $.map(selectedNodes, function(node) { //alert(node.data.key); return node.data.key; }); // Set the hidden input field's value to the selected items $('#SelectedItems').val(selectedKeys.join(",")); if (flag) { child = dtnode.childList; alert(child.length); for (i = 0; i < child.length; i++) { var x = child[i].select(true); alert(i); } } }, checkbox: true, onActivate: function(dtnode) { //alert("You activated " + dtnode.data.key); } }); in the if(flag) condition i get all the child nodes of element that is selected by user and it gives me the correct value that i can see from alert(child.length) statement. then i run the loop to select all the children but loop never goes beyond the statement var x = child[i].select(true); and i can never see the statement alert(i) being executed. the result of above statement is that if i select package 1, module 1.1 and document 1.1.1 is also selected but never does it execute alert(i) statement neither other children of package 1 are selected. in my view when first time child[i].select(true) statement is executed it also triggers the on select event of its children thus making a recursion kind of thing is my thinking correct? no matter recursion or what why on earth does it not complete the loop and execute very next instruction alert(i). please help me in solving this problem. i m dying to see that alert any suggestion and help is highly appriciated thanks Adeel

  Read the article

• Is there a C pre-processor which eliminates #ifdef blocks based on values defined/undefined?

  - by Jonathan Leffler

  Original Question What I'd like is not a standard C pre-processor, but a variation on it which would accept from somewhere - probably the command line via -DNAME1 and -UNAME2 options - a specification of which macros are defined, and would then eliminate dead code. It may be easier to understand what I'm after with some examples: #ifdef NAME1 #define ALBUQUERQUE "ambidextrous" #else #define PHANTASMAGORIA "ghostly" #endif If the command were run with '-DNAME1', the output would be: #define ALBUQUERQUE "ambidextrous" If the command were run with '-UNAME1', the output would be: #define PHANTASMAGORIA "ghostly" If the command were run with neither option, the output would be the same as the input. This is a simple case - I'd be hoping that the code could handle more complex cases too. To illustrate with a real-world but still simple example: #ifdef USE_VOID #ifdef PLATFORM1 #define VOID void #else #undef VOID typedef void VOID; #endif /* PLATFORM1 */ typedef void * VOIDPTR; #else typedef mint VOID; typedef char * VOIDPTR; #endif /* USE_VOID */ I'd like to run the command with -DUSE_VOID -UPLATFORM1 and get the output: #undef VOID typedef void VOID; typedef void * VOIDPTR; Another example: #ifndef DOUBLEPAD #if (defined NT) || (defined OLDUNIX) #define DOUBLEPAD 8 #else #define DOUBLEPAD 0 #endif /* NT */ #endif /* !DOUBLEPAD */ Ideally, I'd like to run with -UOLDUNIX and get the output: #ifndef DOUBLEPAD #if (defined NT) #define DOUBLEPAD 8 #else #define DOUBLEPAD 0 #endif /* NT */ #endif /* !DOUBLEPAD */ This may be pushing my luck! Motivation: large, ancient code base with lots of conditional code. Many of the conditions no longer apply - the OLDUNIX platform, for example, is no longer made and no longer supported, so there is no need to have references to it in the code. Other conditions are always true. For example, features are added with conditional compilation so that a single version of the code can be used for both older versions of the software where the feature is not available and newer versions where it is available (more or less). Eventually, the old versions without the feature are no longer supported - everything uses the feature - so the condition on whether the feature is present or not should be removed, and the 'when feature is absent' code should be removed too. I'd like to have a tool to do the job automatically because it will be faster and more reliable than doing it manually (which is rather critical when the code base includes 21,500 source files). (A really clever version of the tool might read #include'd files to determine whether the control macros - those specified by -D or -U on the command line - are defined in those files. I'm not sure whether that's truly helpful except as a backup diagnostic. Whatever else it does, though, the pseudo-pre-processor must not expand macros or include files verbatim. The output must be source similar to, but usually simpler than, the input code.) Status Report (one year later) After a year of use, I am very happy with 'sunifdef' recommended by the selected answer. It hasn't made a mistake yet, and I don't expect it to. The only quibble I have with it is stylistic. Given an input such as: #if (defined(A) && defined(B)) || defined(C) || (defined(D) && defined(E)) and run with '-UC' (C is never defined), the output is: #if defined(A) && defined(B) || defined(D) && defined(E) This is technically correct because '&&' binds tighter than '||', but it is an open invitation to confusion. I would much prefer it to include parentheses around the sets of '&&' conditions, as in the original: #if (defined(A) && defined(B)) || (defined(D) && defined(E)) However, given the obscurity of some of the code I have to work with, for that to be the biggest nit-pick is a strong compliment; it is valuable tool to me. The New Kid on the Block Having checked the URL for inclusion in the information above, I see that (as predicted) there is an new program called Coan that is the successor to 'sunifdef'. It is available on SourceForge and has been since January 2010. I'll be checking it out...further reports later this year, or maybe next year, or sometime, or never.

  Read the article

• HOWTO: disable jmx in activemq network of brokers (spring, xbean)

  - by subes

  Since I've struggled a lot with this problem, I am posting my solution. Disabling jmx in an activemq network of brokers removes race conditions about the registration of the jmx connector. When starting multiple activemq servers on the same machine: Failed to start jmx connector: Cannot bind to URL [rmi://localhost:1099/jmxrmi]: javax.naming.NameAlreadyBoundException: jmxrmi [Root exception is java.rmi.AlreadyBoundException: jmxrmi] Another problem with this is, that even if you don't cause a race condition, this exception can still occur. Even when starting one broker after another while waiting for them to initialize properly in between. If one process is run by root as the first instance and the other as a normal user, somehow the user process tries to register its own jmx connector, though there already is one. Or another exception which happens when the broker that successfully registered the jmx connector goes down: Failed to start jmx connector: Cannot bind to URL [rmi://localhost:1099/jmxrmi]: javax.naming.ServiceUnavailableException [Root exception is java.rmi.ConnectException: Connection refused to host: localhost; nested exception is: java.net.ConnectException: Connection refused] Those exceptions cause the network of brokers to stop working, or to not work at all. The trick to disable jmx was, that jmx had to be disabled in the connectionfactory aswell. The documentation http://activemq.apache.org/jmx.html does not say that this is needed explicitly. So I had to struggle for 2 days until I found the solution: <beans xmlns="http://www.springframework.org/schema/beans" xmlns:amq="http://activemq.apache.org/schema/core" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-3.0.xsd http://activemq.apache.org/schema/core http://activemq.apache.org/schema/core/activemq-core-5.3.1.xsd"> <!-- Spring JMS Template --> <bean id="jmsTemplate" class="org.springframework.jms.core.JmsTemplate"> <constructor-arg ref="connectionFactory" /> </bean> <!-- Caching, sodass das jms template überhaupt nutzbar ist in sachen performance --> <bean id="connectionFactory" class="org.springframework.jms.connection.CachingConnectionFactory"> <constructor-arg ref="amqConnectionFactory" /> <property name="exceptionListener" ref="jmsExceptionListener" /> <property name="sessionCacheSize" value="1" /> </bean> <!-- Jeder Client verbindet sich mit seinem eigenen broker, broker sind untereinander vernetzt. Nur wenn hier nochmals jmx deaktiviert wird, bleibt es auch deaktiviert... --> <amq:connectionFactory id="amqConnectionFactory" brokerURL="vm://broker:default?useJmx=false" /> <!-- Broker suchen sich einen eigenen Port und sind gegenseitig verbunden, ergeben dadurch ein Grid. Dies zwar etwas langsamer, aber dafür ausfallsicherer. Siehe http://activemq.apache.org/networks-of-brokers.html --> <amq:broker useJmx="false" persistent="false"> <!-- Wird benötigt um JMX endgültig zu deaktivieren --> <amq:managementContext> <amq:managementContext connectorHost="localhost" createConnector="false" /> </amq:managementContext> <!-- Nun die normale Konfiguration für Network of Brokers --> <amq:networkConnectors> <amq:networkConnector networkTTL="1" duplex="true" dynamicOnly="true" uri="multicast://default" /> </amq:networkConnectors> <amq:persistenceAdapter> <amq:memoryPersistenceAdapter /> </amq:persistenceAdapter> <amq:transportConnectors> <amq:transportConnector uri="tcp://localhost:0" discoveryUri="multicast://default" /> </amq:transportConnectors> </amq:broker> With this, there is no need to specify -Dcom.sun.management.jmxremote=false for the jvm. Which somehow also didn't work for me, because the connectionfactory started the jmx connector.

  Read the article

• Treeview - Hierarchical Data Template - Binding does not update on source change?

  - by ClearsTheScreen

  Greetings! I ran into this problem in my project (Silverlight 3 with C#): I have a TreeView which is data bound to, well, a tree. This TreeView has a HierarchicalDataTamplate in a resource dictionary, that defines various controls. Now I want to hide (Visibility.Collapse) some items depending on wether a node has children or not. Other items shall be visible under the same condition. It works like charm when I first bind the source tree to the TreeView, but when I change the source tree, the visibility in the treeview does not change. XAML - page: <controls:TreeView x:Name="SankeyTreeView" ItemContainerStyle="{StaticResource expandedTreeViewItemStyle}" ItemTemplate="{StaticResource SankeyTreeTemplate}"> <controls:TreeViewItem IsExpanded="True"> <controls:TreeViewItem.HeaderTemplate> <DataTemplate> <TextBlock Text="This is just for loading and will be replaced directly after the data becomes available..."/> </DataTemplate> </controls:TreeViewItem.HeaderTemplate> </controls:TreeViewItem> </controls:TreeView> XAML - ResourceDictionary <!-- Each node in the tree is structurally identical, hence only one Hierarchical Data Template that'll use itself on the children. --> <Data:HierarchicalDataTemplate x:Key="SankeyTreeTemplate" ItemsSource="{Binding Children}"> <Grid Height="24"> <TextBlock x:Name="TextBlockName" Text="{Binding Path=Value.name, Mode=TwoWay}" VerticalAlignment="Center" Foreground="Black"/> <TextBox x:Name="TextBoxFlow" Text="{Binding Path=Value.flow, Mode=TwoWay}" Grid.Column="1" Visibility="{Binding Children, Converter={StaticResource BoxConverter}, ConverterParameter=\{box\}}"/> <TextBlock x:Name="TextBlockThroughput" Text="{Binding Path=Value.throughput, Mode=TwoWay}" Grid.Column="1" Visibility="{Binding Children, Converter={StaticResource BoxConverter}, ConverterParameter=\{block\}}"/> <Button x:Name="ButtonAddNode"/> <Button x:Name="ButtonDeleteNode"/> <Button x:Name="ButtonEditNode"/> </Grid> </Data:HierarchicalDataTemplate> Now, as you can see, the TextBoxFlow and the TextBlockThroughput share the same space. What I aim at: The "Throughput" value of a node is how much of something 'flows' through this node from its children. It can't be changed directly, so I want to display a text block. Only leaf nodes have a TextBox to let someone enter the 'flow' that is generated in this leaf node. (I.E.: Node.Throughput = Node.Flow + Sum(Children.Throughput), where Node.Flow = 0 for each non-leaf.) What the BoxConverter (silly name -.-) does: public object Convert(object value, Type targetType, object parameter, System.Globalization.CultureInfo culture) { if ((value as NodeList<TreeItem>).Count > 1) // Node has Children? { if ((parameter as String) == "{box}") { return Visibility.Collapsed; } else ((parameter as String) == "{block}") { return Visibility.Visible; } } else { /* * As above, just with Collapsed and Visible switched */ } } The structure of the tree that is bound to the TreeView is essentially stolen from Dan Vanderboom (a bit too much to dump the whole code here), except that I here of course use an ObservableCollection for the children and the value items implement INotifyPropertyChanged. I would be very grateful if someone could explain to me, why inserting items into the underlying tree does not update the visibility for box and block. Thank you in advance!

  Read the article

• FormatException with IsolatedStorageSettings

  - by Jurgen Camilleri

  I have a problem when serializing a Dictionary<string,Person> to IsolatedStorageSettings. I'm doing the following: public Dictionary<string, Person> Names = new Dictionary<string, Person>(); if (!IsolatedStorageSettings.ApplicationSettings.Contains("Names")) { //Add to dictionary Names.Add("key", new Person(false, new System.Device.Location.GeoCoordinate(0, 0), new List<GeoCoordinate>() { new GeoCoordinate(35.8974, 14.5099), new GeoCoordinate(35.8974, 14.5099), new GeoCoordinate(35.8973, 14.5100), new GeoCoordinate(35.8973, 14.5099) })); //Serialize dictionary to IsolatedStorage IsolatedStorageSettings.ApplicationSettings.Add("Names", Names); IsolatedStorageSettings.ApplicationSettings.Save(); } Here is my Person class: [DataContract] public class Person { [DataMember] public bool Unlocked { get; set; } [DataMember] public GeoCoordinate Location { get; set; } [DataMember] public List<GeoCoordinate> Bounds { get; set; } public Person(bool unlocked, GeoCoordinate location, List<GeoCoordinate> bounds) { this.Unlocked = unlocked; this.Location = location; this.Bounds = bounds; } } The code works the first time, however on the second run I get a System.FormatException at the if condition. Any help would be highly appreciated thanks. P.S.: I tried an IsolatedStorageSettings.ApplicationSettings.Clear() but the call to Clear also gives a FormatException. I have found something new...the exception occurs twenty-five times, or at least that's how many times it shows up in the Output window. However after that, the data is deserialized perfectly. Should I be worried about the exceptions if they do not stop the execution of the program? EDIT: Here's the call stack when the exception occurs: mscorlib.dll!double.Parse(string s, System.Globalization.NumberStyles style, System.IFormatProvider provider) + 0x17 bytes System.Xml.dll!System.Xml.XmlConvert.ToDouble(string s) + 0x4b bytes System.Xml.dll!System.Xml.XmlReader.ReadContentAsDouble() + 0x1f bytes System.Runtime.Serialization.dll!System.Xml.XmlDictionaryReader.XmlWrappedReader.ReadContentAsDouble() + 0xb bytes System.Runtime.Serialization.dll!System.Xml.XmlDictionaryReader.ReadElementContentAsDouble() + 0x35 bytes System.Runtime.Serialization.dll!System.Runtime.Serialization.XmlReaderDelegator.ReadElementContentAsDouble() + 0x19 bytes mscorlib.dll!System.Reflection.RuntimeMethodInfo.InternalInvoke(System.Reflection.RuntimeMethodInfo rtmi, object obj, System.Reflection.BindingFlags invokeAttr, System.Reflection.Binder binder, object parameters, System.Globalization.CultureInfo culture, bool isBinderDefault, System.Reflection.Assembly caller, bool verifyAccess, ref System.Threading.StackCrawlMark stackMark) mscorlib.dll!System.Reflection.RuntimeMethodInfo.InternalInvoke(object obj, System.Reflection.BindingFlags invokeAttr, System.Reflection.Binder binder, object[] parameters, System.Globalization.CultureInfo culture, ref System.Threading.StackCrawlMark stackMark) + 0x168 bytes mscorlib.dll!System.Reflection.MethodBase.Invoke(object obj, object[] parameters) + 0xa bytes System.Runtime.Serialization.dll!System.Runtime.Serialization.XmlFormatReader.ReadValue(System.Type type, string name, string ns, System.Runtime.Serialization.XmlObjectSerializerReadContext context, System.Runtime.Serialization.XmlReaderDelegator xmlReader) + 0x138 bytes System.Runtime.Serialization.dll!System.Runtime.Serialization.XmlFormatReader.ReadMemberAtMemberIndex(System.Runtime.Serialization.ClassDataContract classContract, ref object objectLocal, System.Runtime.Serialization.DeserializedObject desObj) + 0xc4 bytes System.Runtime.Serialization.dll!System.Runtime.Serialization.XmlFormatReader.ReadClass(System.Runtime.Serialization.DeserializedObject desObj, System.Runtime.Serialization.ClassDataContract classContract, int membersRead) + 0xf3 bytes System.Runtime.Serialization.dll!System.Runtime.Serialization.XmlFormatReader.Deserialize(System.Runtime.Serialization.XmlObjectSerializerReadContext context) + 0x36 bytes System.Runtime.Serialization.dll!System.Runtime.Serialization.XmlFormatReader.InitializeCallStack(System.Runtime.Serialization.DataContract clContract, System.Runtime.Serialization.XmlReaderDelegator xmlReaderDelegator, System.Runtime.Serialization.XmlObjectSerializerReadContext xmlObjContext, System.Xml.XmlDictionaryString[] memberNamesColl, System.Xml.XmlDictionaryString[] memberNamespacesColl) + 0x77 bytes System.Runtime.Serialization.dll!System.Runtime.Serialization.CollectionDataContract.ReadXmlValue(System.Runtime.Serialization.XmlReaderDelegator xmlReader, System.Runtime.Serialization.XmlObjectSerializerReadContext context) + 0x5d bytes System.Runtime.Serialization.dll!System.Runtime.Serialization.XmlObjectSerializerReadContext.ReadDataContractValue(System.Runtime.Serialization.DataContract dataContract, System.Runtime.Serialization.XmlReaderDelegator reader) + 0x3 bytes System.Runtime.Serialization.dll!System.Runtime.Serialization.XmlObjectSerializerReadContext.InternalDeserialize(System.Runtime.Serialization.XmlReaderDelegator reader, string name, string ns, ref System.Runtime.Serialization.DataContract dataContract) + 0x10e bytes System.Runtime.Serialization.dll!System.Runtime.Serialization.XmlObjectSerializerReadContext.InternalDeserialize(System.Runtime.Serialization.XmlReaderDelegator xmlReader, System.Type declaredType, System.Runtime.Serialization.DataContract dataContract, string name, string ns) + 0xb bytes System.Runtime.Serialization.dll!System.Runtime.Serialization.DataContractSerializer.InternalReadObject(System.Runtime.Serialization.XmlReaderDelegator xmlReader, bool verifyObjectName) + 0x124 bytes System.Runtime.Serialization.dll!System.Runtime.Serialization.XmlObjectSerializer.ReadObjectHandleExceptions(System.Runtime.Serialization.XmlReaderDelegator reader, bool verifyObjectName) + 0xe bytes System.Runtime.Serialization.dll!System.Runtime.Serialization.XmlObjectSerializer.ReadObject(System.Xml.XmlDictionaryReader reader) + 0x7 bytes System.Runtime.Serialization.dll!System.Runtime.Serialization.XmlObjectSerializer.ReadObject(System.IO.Stream stream) + 0x17 bytes System.Windows.dll!System.IO.IsolatedStorage.IsolatedStorageSettings.Reload() + 0xa3 bytes System.Windows.dll!System.IO.IsolatedStorage.IsolatedStorageSettings.IsolatedStorageSettings(bool useSiteSettings) + 0x20 bytes System.Windows.dll!System.IO.IsolatedStorage.IsolatedStorageSettings.ApplicationSettings.get() + 0xd bytes

  Read the article

• php script gets two ajax requests, only returns one?

  - by Dan.StackOverflow

  I'll start from the beginning. I'm building a wordpress plugin that does double duty, in that it can be inserted in to a post via a shortcode, or added as a sidebar widget. All it does is output some js to make jquery.post requests to a local php file. The local php file makes a request to a webservice for some data. (I had to do it this way instead of directly querying the web service with jquery.ajax because the url contains a license key that would be public if put in the js). Anyway, When I am viewing a page in the wordpress blog that has both the sidebar widget and the plugin output via shortcode only one of the requests work. I mean it works in that it gets a response back from the php script. Once the page is loaded they both work normally when manually told to. Webpage view - send 2 post requests to my php script - both elements should be filed in, but only one is. My php script is just: <?php if(isset($_POST["zip"])) { // build a curl object, execute the request, // and basically just echo what the curl request returns. } ?> Pretty basic. here is some js some people wanted to see: function widget_getActivities( zip ){ jQuery("#widget_active_list").text(""); jQuery.post("http://localhost/wordpress/wp-content/ActiveAjax.php", { zip: zip}, function(text) { jQuery(text).find("asset").each(function(j, aval){ var html = ""; html += "<a href='" + jQuery(aval).find("trackback").text() + "' target='new'> " + jQuery(aval).find("assetName").text() + "</a><b> at </b>"; jQuery("location", aval).each(function(i, val){ html += jQuery("locationName", val).text() + " <b> on </b>"; }); jQuery("date", aval).each(function(){ html += jQuery("startDate", aval).text(); <!--jQuery("#widget_active_list").append("<div id='ActivityEntry'>" + html + " </div>");--> jQuery("#widget_active_list") .append(jQuery("<div>") .addClass("widget_ActivityEntry") .html(html) .bind("mouseenter", function(){ jQuery(this).animate({ fontSize: "20px", lineHeight: "1.2em" }, 50); }) .bind("mouseleave", function(){ jQuery(this).animate({ fontSize: "10px", lineHeight: "1.2em" }, 50); }) ); }); }); }); } Now imagine there is another function identical to this one except everything that is prepended with 'widget_' isn't prepended. These two functions get called separately via: jQuery(document).ready(function(){ w_zip = jQuery("#widget_zip").val(); widget_getActivities( w_zip ); jQuery("#widget_updateZipLink").click(function() { //start function when any update link is clicked widget_c_zip = jQuery("#widget_zip").val(); if (undefined == widget_c_zip || widget_c_zip == "" || widget_c_zip.length != 5) jQuery("#widget_zipError").text("Bad zip code"); else widget_getActivities( widget_c_zip ); }); }) I can see in my apache logs that both requests are being made. I'm guessing it is some sort of race condition but that doesn't make ANY sense. I'm new to all this, any ideas? EDIT: I've come up with a sub-optimal solution. I have my widget detect if the plugin is also being used on the page, and if so it waits for 3 seconds before performing the request. But I have a feeling this same thing is going to happen if multiple clients perform a page request at the same time that triggers one of the requests to my php script, because I believe the problem is in the php script, which is scary.

  Read the article

• Where to Store the Protection Trial Info for Software Protection Purpose

  - by Peter Lee

  It might be duplicate with other questions, but I swear that I googled a lot and search at StackOverflow.com a lot, and I cannot find the answer to my question: In a C#.Net application, where to store the protection trial info, such as Expiration Date, Number of Used Times? I understand that, all kinds of Software Protection strategies can be cracked by a sophiscated hacker (because they can almost always get around the expiration checking step). But what I'm now going to do is just to protect it in a reasonable manner that a "common"/"advanced" user cannot screw it up. OK, in order to proof that I have googled and searched a lot at StackOverflow.com, I'm listing all the possible strategies I got: 1. Registry Entry First, some users might not have the access to even read the Registry table. Second, if we put the Protection Trial Info in a Registry Entry, the user can always find it out where it is by comparing the differences before and after the software installation. They can just simply change it. OK, you might say that we should encrypt the Protection Trial Info, yes we can do that. But what if the user just change their system date before installing? OK, you might say that we should also put a last-used date, if something is wrong, the last-used date could work as a protection guide. But what if the user just uninstall the software and delete all Registry Entries related to this software, and then reinstall the software? I have no idea on how to deal with this. Please help. A Plain File First, there are some places to put the plain file: 2.a) a simple XML file under software installation path 2.b) configuration file Again, the user can just uninstall the software and remove these plain file(s), and reinstall the software. - The Software Itself If we put the protection trial info (Expiration Date, we cannot put Number of Used Times) in the software itself, it is still susceptible to the cases I mentioned above. Furthermore, it's not even cool to do so. - A Trial Product-Key It works like a licensing process, that is, we put the Trial info into an RSA-signed string. However, it requires too many steps for a user to have a try of using the software (they might lose patience): 4.a) The user downloads the software; 4.b) The user sends an email to request a Trial Product-Key by providing user name (or email) or hardware info; 4.c) The server receives the request, RSA-signs it and send back to the user; 4.d) The user can now use it under the condition of (Expiration Date & Number of Used Times). Now, the server has a record of the user's username or hardware info, so the user will be rejected to request a second trial. Is it legal to collection hardware info? In a word, the user has to do one more extra step (request a Trial Product Key) just for having a try of using the software, which is not cool (thinking myself as a user). NOTE: This question is not about the Licensing, instead, it's about where to store the TRIAL info. After the trial expires, the user should ask for a license (CD-Key/Product-Key). I'm going to use RSA signature (bound to User Hardware)

  Read the article

• Using SQLXML Bulk Load in .NET Environment - Error with One to Many relationship on Complex Type

  - by user331111

  Hi, I have an error when I am importing an XML file using SQLXMLBulkLoad, wondering if anyone could help. Error: Data mapping to column 'Attribute' was already found in the data. Make sure that no two schema definitions map to the same column Full files and details can be found here http://www.experts-exchange.com/Microsoft/Development/MS-SQL-Server/SQL-Server-2005/Q_26102239.html Exert from XSD: <sql:relationship name="EnvironmentDECAttributes" parent="Environment" parent-key="intEnvironmentID" child="DECAttributes" child-key="intEnvironmentID"/> <complexType name="Environment"> <sequence> <element name="ESANumber" minOccurs="0"> <annotation> <documentation> Environmentally Sensitive Area Number </documentation> </annotation> <simpleType> <restriction base="string"> <maxLength value="15"/> <whiteSpace value="collapse"/> </restriction> </simpleType> </element> <element name="Conditions" minOccurs="0" sql:relation="Conditions" sql:relationship="EnvironmentConditions"> <complexType> <sequence> <element name="Condition" type="vms:EnvironmentalConditions" minOccurs="0" maxOccurs="5"/> </sequence> </complexType> </element> <element name="DECDistrict" minOccurs="0"> <annotation> <documentation> Department of Environment &amp; Conservation District </documentation> </annotation> <simpleType> <restriction base="string"> <maxLength value="31"/> <whiteSpace value="collapse"/> </restriction> </simpleType> </element> <element name="DECAttributes" minOccurs="0" maxOccurs="1" sql:relation="DECAttributes" sql:relationship="EnvironmentDECAttributes"> <complexType> <sequence> <element name="Attribute" type="vms:DECAttributes" minOccurs="0" maxOccurs="unbounded" sql:field="Attribute"> <annotation> <documentation> Department of Environment &amp; Conservation attributes. </documentation> </annotation> </element> </sequence> </complexType> </element> </sequence> </complexType> Exert from XML: <Environment> <DECAttributes> <Attribute>WA</Attribute> <Attribute>SA</Attribute> </DECAttributes> </Environment> Any help/ comments would be appreciated Thanks C

  Read the article

• Tiered Design With Analytical Widgets - Is This Code Smell?

  - by Repo Man

  The idea I'm playing with right now is having a multi-leveled "tier" system of analytical objects which perform a certain computation on a common object and then create a new set of analytical objects depending on their outcome. The newly created analytical objects will then get their own turn to run and optionally create more analytical objects, and so on and so on. The point being that the child analytical objects will always execute after the objects that created them, which is relatively important. The whole apparatus will be called by a single thread so I'm not concerned with thread safety at the moment. As long as a certain base condition is met, I don't see this being an unstable design but I'm still a little bit queasy about it. Is this some serious code smell or should I go ahead and implement it this way? Is there a better way? Here is a sample implementation: namespace WidgetTier { public class Widget { private string _name; public string Name { get { return _name; } } private TierManager _tm; private static readonly Random random = new Random(); static Widget() { } public Widget(string name, TierManager tm) { _name = name; _tm = tm; } public void DoMyThing() { if (random.Next(1000) > 1) { _tm.Add(); } } } //NOT thread-safe! public class TierManager { private Dictionary<int, List<Widget>> _tiers; private int _tierCount = 0; private int _currentTier = -1; private int _childCount = 0; public TierManager() { _tiers = new Dictionary<int, List<Widget>>(); } public void Add() { if (_currentTier + 1 >= _tierCount) { _tierCount++; _tiers.Add(_currentTier + 1, new List<Widget>()); } _tiers[_currentTier + 1].Add(new Widget(string.Format("({0})", _childCount), this)); _childCount++; } //Dangerous? public void Sweep() { _currentTier = 0; while (_currentTier < _tierCount) //_tierCount will start at 1 but keep increasing because child objects will keep adding more tiers. { foreach (Widget w in _tiers[_currentTier]) { w.DoMyThing(); } _currentTier++; } } public void PrintAll() { for (int t = 0; t < _tierCount; t++) { Console.Write("Tier #{0}: ", t); foreach (Widget w in _tiers[t]) { Console.Write(w.Name + " "); } Console.WriteLine(); } } } class Program { static void Main(string[] args) { TierManager tm = new TierManager(); for (int c = 0; c < 10; c++) { tm.Add(); //create base widgets; } tm.Sweep(); tm.PrintAll(); Console.ReadLine(); } } }

  Read the article

• Unable to launch onscreen keyboard (osk.exe) from a 32-bit process on Win7 x64

  - by Steven Robbins

  90% of the time I am unable to launch osk.exe from a 32bit process on Win7 x64. Originally the code was just using: Process.Launch("osk.exe"); Which won't work on x64 because of the directory virtualization. Not a problem I thought, I'll just disable virtualization, launch the app, and enable it again, which I thought was the correct way to do things. I also added some code to bring the keyboard back up if it has been minimized (which works fine) - the code (in a sample WPF app) now looks as follows: using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Windows; using System.Windows.Controls; using System.Windows.Data; using System.Windows.Documents; using System.Windows.Input; using System.Windows.Media; using System.Windows.Media.Imaging; using System.Windows.Navigation;using System.Diagnostics; using System.Runtime.InteropServices; namespace KeyboardTest { /// <summary> /// Interaction logic for MainWindow.xaml /// </summary> public partial class MainWindow : Window { [DllImport("kernel32.dll", SetLastError = true)] private static extern bool Wow64DisableWow64FsRedirection(ref IntPtr ptr); [DllImport("kernel32.dll", SetLastError = true)] public static extern bool Wow64RevertWow64FsRedirection(IntPtr ptr); private const UInt32 WM_SYSCOMMAND = 0x112; private const UInt32 SC_RESTORE = 0xf120; [DllImport("user32.dll", CharSet = CharSet.Auto)] static extern IntPtr SendMessage(IntPtr hWnd, UInt32 Msg, IntPtr wParam, IntPtr lParam); private string OnScreenKeyboadApplication = "osk.exe"; public MainWindow() { InitializeComponent(); } private void KeyboardButton_Click(object sender, RoutedEventArgs e) { // Get the name of the On screen keyboard string processName = System.IO.Path.GetFileNameWithoutExtension(OnScreenKeyboadApplication); // Check whether the application is not running var query = from process in Process.GetProcesses() where process.ProcessName == processName select process; var keyboardProcess = query.FirstOrDefault(); // launch it if it doesn't exist if (keyboardProcess == null) { IntPtr ptr = new IntPtr(); ; bool sucessfullyDisabledWow64Redirect = false; // Disable x64 directory virtualization if we're on x64, // otherwise keyboard launch will fail. if (System.Environment.Is64BitOperatingSystem) { sucessfullyDisabledWow64Redirect = Wow64DisableWow64FsRedirection(ref ptr); } // osk.exe is in windows/system folder. So we can directky call it without path using (Process osk = new Process()) { osk.StartInfo.FileName = OnScreenKeyboadApplication; osk.Start(); osk.WaitForInputIdle(2000); } // Re-enable directory virtualisation if it was disabled. if (System.Environment.Is64BitOperatingSystem) if (sucessfullyDisabledWow64Redirect) Wow64RevertWow64FsRedirection(ptr); } else { // Bring keyboard to the front if it's already running var windowHandle = keyboardProcess.MainWindowHandle; SendMessage(windowHandle, WM_SYSCOMMAND, new IntPtr(SC_RESTORE), new IntPtr(0)); } } } } But this code, most of the time, throws the following exception on osk.Start(): The specified procedure could not be found at System.Diagnostics.Process.StartWithShellExecuteEx(ProcessStartInfo startInfo) I've tried putting long Thread.Sleep commands in around the osk.Start line, just to make sure it wasn't a race condition, but the same problem persists. Can anyone spot where I'm doing something wrong, or provide an alternative solution for this? It seems to work fine launching Notepad, it just won't play ball with the onscreen keyboard.

  Read the article

• Help me alter this query to get the desired results - New*

  - by sandeepan

  Please dump these data first CREATE TABLE IF NOT EXISTS `all_tag_relations` ( `id_tag_rel` int(10) NOT NULL AUTO_INCREMENT, `id_tag` int(10) unsigned NOT NULL DEFAULT '0', `id_tutor` int(10) DEFAULT NULL, `id_wc` int(10) unsigned DEFAULT NULL, PRIMARY KEY (`id_tag_rel`), KEY `All_Tag_Relations_FKIndex1` (`id_tag`), KEY `id_wc` (`id_wc`) ) ENGINE=InnoDB DEFAULT CHARSET=latin1 AUTO_INCREMENT=19 ; INSERT INTO `all_tag_relations` (`id_tag_rel`, `id_tag`, `id_tutor`, `id_wc`) VALUES (1, 1, 1, NULL), (2, 2, 1, NULL), (3, 6, 2, NULL), (4, 7, 2, NULL), (8, 3, 1, 1), (9, 4, 1, 1), (10, 5, 2, 2), (11, 4, 2, 2), (15, 8, 1, 3), (16, 9, 1, 3), (17, 10, 1, 4), (18, 4, 1, 4), (19, 1, 2, 5), (20, 4, 2, 5); CREATE TABLE IF NOT EXISTS `tags` ( `id_tag` int(10) unsigned NOT NULL AUTO_INCREMENT, `tag` varchar(255) DEFAULT NULL, PRIMARY KEY (`id_tag`), UNIQUE KEY `tag` (`tag`), KEY `id_tag` (`id_tag`), KEY `tag_2` (`tag`), KEY `tag_3` (`tag`), KEY `tag_4` (`tag`), FULLTEXT KEY `tag_5` (`tag`) ) ENGINE=MyISAM DEFAULT CHARSET=latin1 AUTO_INCREMENT=11 ; INSERT INTO `tags` (`id_tag`, `tag`) VALUES (1, 'Sandeepan'), (2, 'Nath'), (3, 'first'), (4, 'class'), (5, 'new'), (6, 'Bob'), (7, 'Cratchit'), (8, 'more'), (9, 'fresh'), (10, 'second'); CREATE TABLE IF NOT EXISTS `webclasses` ( `id_wc` int(10) NOT NULL AUTO_INCREMENT, `id_author` int(10) NOT NULL, `name` varchar(50) DEFAULT NULL, PRIMARY KEY (`id_wc`) ) ENGINE=InnoDB DEFAULT CHARSET=latin1 AUTO_INCREMENT=5 ; INSERT INTO `webclasses` (`id_wc`, `id_author`, `name`) VALUES (1, 1, 'first class'), (2, 2, 'new class'), (3, 1, 'more fresh'), (4, 1, 'second class'), (5, 2, 'sandeepan class'); About the system - The system consists of tutors and classes. - The data in the table All_Tag_Relations stores tag relations for each tutor registered and each class created by a tutor. The tag relations are used for searching classes. The current data dump corresponds to tutor "Sandeepan Nath" who has created classes named "first class", "more fresh", "second class" and tutor "Bob Cratchit" who has created classes "new class" and "Sandeepan class". I am trying for a search query performs AND logic on the search keywords and returns wvery such class for which the search terms are present in the class name or its tutor name To make it easy, following is the list of search terms and desired results:- Search term result classes (check the id_wc in the results) first class 1 Sandeepan Nath class 1 Sandeepan Nath 1,3 Bob Cratchit 2 Sandeepan Nath bob none Sandeepan Class 1,4,5 I have so far reached upto this query -- Two keywords search SET @tag1 = 4, @tag2 = 1; -- Setting some user variables to see where the ids go. SELECT wc.id_wc, sum( DISTINCT ( wtagrels.id_tag = @tag1 ) ) AS key_1_class_matches, sum( DISTINCT ( wtagrels.id_tag = @tag2 ) ) AS key_2_class_matches, sum( DISTINCT ( ttagrels.id_tag = @tag1 ) ) AS key_1_tutor_matches, sum( DISTINCT ( ttagrels.id_tag = @tag2 ) ) AS key_2_tutor_matches, sum( DISTINCT ( ttagrels.id_tag = wtagrels.id_tag ) ) AS key_class_tutor_matches FROM WebClasses as wc join all_tag_relations AS wtagrels on wc.id_wc = wtagrels.id_wc join all_tag_relations as ttagrels on (wc.id_author = ttagrels.id_tutor) WHERE ( wtagrels.id_tag = @tag1 OR wtagrels.id_tag = @tag2 OR ttagrels.id_tag = @tag1 OR ttagrels.id_tag = @tag2 ) GROUP BY wtagrels.id_wc LIMIT 0 , 20 For search with 1 or 3 terms, remove/add the variable part in this query. Tabulating my observation of the values of key_1_class_matches, key_2_class_matches,key_1_tutor_matches (say, class keys),key_2_tutor_matches for various cases (say, tutor keys). Search term expected result Observation first class 1 for class 1, all class keys+all tutor keys =1 Sandeepan Nath class 1 for class 1, one class key+ all tutor keys = 1 Sandeepan Nath 1,3 both tutor keys =1 for these classes Bob Cratchit 2 both tutor keys = 1 Sandeepan Nath bob none no complete tutor matches for any class I found a pattern that, for any case, the class(es) which should appear in the result have the highest number of matches (all class keys and tutor keys). E.g. searching "first class", only for class =1, total of key matches = 4(1+1+1+1) searching "Sandeepan Nath", for classes 1, 3,4(all classes by Sandeepan Nath) have all the tutor keys matching. But no pattern in the search for "Sandeepan Class" - classes 1,4,5 should match. Now, how do I put a condition into the query, based on that pattern so that only those classes are returned. Do I need to use full text search here because it gives a scoring/rank value indicating the strength of the match? Any sample query would help. Please note - I have already found solution for showing classes when any/all of the search terms match with the class name. http://stackoverflow.com/questions/3030022/mysql-help-me-alter-this-search-query-to-get-desired-results But if all the search terms are in tutor name, it does not work. So, I am modifying the query and experimenting.

  Read the article

• Error Handling without Exceptions

  - by James

  While searching SO for approaches to error handling related to business rule validation , all I encounter are examples of structured exception handling. MSDN and many other reputable development resources are very clear that exceptions are not to be used to handle routine error cases. They are only to be used for exceptional circumstances and unexpected errors that may occur from improper use by the programmer (but not the user.) In many cases, user errors such as fields that are left blank are common, and things which our program should expect, and therefore are not exceptional and not candidates for use of exceptions. QUOTE: Remember that the use of the term exception in programming has to do with the thinking that an exception should represent an exceptional condition. Exceptional conditions, by their very nature, do not normally occur; so your code should not throw exceptions as part of its everyday operations. Do not throw exceptions to signal commonly occurring events. Consider using alternate methods to communicate to a caller the occurrence of those events and leave the exception throwing for when something truly out of the ordinary happens. For example, proper use: private void DoSomething(string requiredParameter) { if (requiredParameter == null) throw new ArgumentExpcetion("requiredParameter cannot be null"); // Remainder of method body... } Improper use: // Renames item to a name supplied by the user. Name must begin with an "F". public void RenameItem(string newName) { // Items must have names that begin with "F" if (!newName.StartsWith("F")) throw new RenameException("New name must begin with /"F/""); // Remainder of method body... } In the above case, according to best practices, it would have been better to pass the error up to the UI without involving/requiring .NET's exception handling mechanisms. Using the same example above, suppose one were to need to enforce a set of naming rules against items. What approach would be best? Having the method return a enumerated result? RenameResult.Success, RenameResult.TooShort, RenameResult.TooLong, RenameResult.InvalidCharacters, etc. Using an event in a controller class to report to the UI class? The UI calls the controller's RenameItem method, and then handles an AfterRename event that the controller raises and that has rename status as part of the event args? The controlling class directly references and calls a method from the UI class that handles the error, e.g. ReportError(string text). Something else... ? Essentially, I want to know how to perform complex validation in classes that may not be the Form class itself, and pass the errors back to the Form class for display -- but I do not want to involve exception handling where it should not be used (even though it seems much easier!) Based on responses to the question, I feel that I'll have to state the problem in terms that are more concrete: UI = User Interface, BLL = Business Logic Layer (in this case, just a different class) User enters value within UI. UI reports value to BLL. BLL performs routine validation of the value. BLL discovers rule violation. BLL returns rule violation to UI. UI recieves return from BLL and reports error to user. Since it is routine for a user to enter invalid values, exceptions should not be used. What is the right way to do this without exceptions?

  Read the article

< Previous Page | 497 498 499 500 501 502 503 504 505 506 507 508  | Next Page >