Search Results

Search found 20786 results on 832 pages for 'static variables'.

Page 512/832 | < Previous Page | 508 509 510 511 512 513 514 515 516 517 518 519  | Next Page >

• Connect to wired and wireless networks at same time, Ubuntu

  - by Gary Chambers

  Currently, I have a media PC running Ubuntu 10.04 that I am trying to connect via a wired network cable directly to a NAS box, and wirelessly to the router. This works no problem after I run sudo /etc/init.d/networking restart but I can't get both interfaces to come up on system startup. My /etc/network/interfaces file reads as follows: auto eth0 iface eth0 inet static address 10.0.1.2 netmask 255.255.254.0 broadcast 10.0.1.255 network 10.0.1.0 auto wlan2 iface wlan2 inet dhcp As I say, I know this works, because I can get it to work by restarting the network interfaces, but I can't bring them both up on system startup. Does anyone know why this might be?

  Read the article

• how to change interface ip in ifconfig with /etc/network/interfaces

  - by user2478348

  Hi everybody when modifiying /etc/network/interfaces, saving it and then executing ifconfig i can't see the modification i made..for example here is part of my /etc/network/interfaces: auto wlan1 iface wlan1 inet static address 192.168.0.60 netmask 255.255.255.0 gateway 192.168.0.61 you can see that the IP address of my wlan1 is 192.168.0.60 but when typing ifconfig i have this: wlan1 Link encap:Ethernet HWaddr 00:19:70:0f:c2:9c inet adr:192.168.0.1 Bcast:192.168.0.255 Masque:255.255.255.0 adr inet6: fe80::219:70ff:fe0f:c29c/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Packets reçus:758 erreurs:0 :0 overruns:0 frame:0 TX packets:610 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 Octets reçus:73490 (73.4 KB) Octets transmis:127883 (127.8 KB) (the inet adr:192.168.0.1 and not 198.168.0.60)..if someone can help me I'll be very thankful :)

  Read the article

• What is the most efficient way to add and removed Slick2D sprites?

  - by kirchhoff

  I'm making a game in Java with Slick2D and I want to create planes which shoots: int maxBullets = 40; static int bullet = 0; Missile missile[] = new Missile[maxBullets]; I want to create/move my missiles in the most efficient way, I would appreciate your advise: public void shoot() throws SlickException{ if(bullet<maxBullets){ if(missile[bullet] != null){ missile[bullet].resetLocation(plane.getCentreX(), plane.getCentreY(), plane.image.getRotation()); }else{ missile[bullet] = new Missile("resources/missile.png", plane.getCentreX(), plane.getCentreY(), plane.image.getRotation()); } }else{ bullet = 0; missile[bullet].resetLocation(plane.getCentreX(), plane.getCentreY(), plane.image.getRotation()); } bullet++; } I created the method resetLocation in my Missile class in order to avoid loading again the resource. Is it correct? In the update method I've got this to move all the missiles: if(bullet > 0 && bullet < maxBullets){ float hyp = 0.4f * delta; if(bullet == 1){ missile[0].move(hyp); }else{ for(int x = 0; x<bullet; x++){ missile[x].move(hyp); } } }

  Read the article

• NginX : Route user request to backend

  - by xperator

  The goal is to have NginX webserver act as a very basic & simple load balancer/fail-over. But instead of fetching static files from backend and serving it to user, I just want to route/redirect user request to one of the back end servers. upstream backend { server server1.example.com:80; server server2.example.com:80; server server3.example.com:80; } location / { proxy_pass http://backend; } Instead of : User request (example.com/test.file) NginX LB Backend NginX LB User I want to have : User request (example.com/test.file) NginX LB Backend User Is this even possible with NginX ? If not then How can I achieve this goal. UPDATE 1: Is there a way to use rewrite directive with backend upstream ? UPDATE 2: It's not really necessary to use NginX. I just want to have a direct reply from backend to user.

  Read the article

• MvcReportViewer v.0.4.0 is available!

  - by Ilya Verbitskiy

  Originally posted on: http://geekswithblogs.net/ilich/archive/2014/06/04/mvcreportviewer-v.0.4.0-is-available.aspxToday I released new version of MvcReportViewer. This release contains mostly bug fixes reported by library users. I am glad to see that Open Source model works and people try to contribute to the project! Thank you everybody for your bug repots and help with the project. Version 0.4.0 Added support for ASP.NET MVC 5 Removed jQuery dependency. I have not tested it on IE8 or earlier versions. Any help with testing is welcome! Fixed problem with SSRS keep-alive cookies. Keep-alive cookies are issued every time a report is opened during a browser session. Many people don't restart their browsers and in my case, Chrome doesn't get rid of the cookie session data on close - had to manually delete them for the reports to start working again. I added KeepSessionAlive control settings to manage SSRS keep-alive behavior. It is set to false by default to fix Bad Request 400: Request Too Long issue. You can find usage example in Fluent.cshtml. Fixed the bug when ReportViewer Control parameters was not parsed when ShowParameterPrompts parameter had not been set. Changed public static MvcReportViewerIframe MvcReportViewer method to use IEnumerable<KeyValuePair<string, object>> reportParameters instead of simple object. The reason is users reported that they mostly use multiple report parameters’ values. Added support for SSRS hosted on Windows Azure. Users should set MvcReportViewer.IsAzureSSRS property to true in Web.config to use Windows Azure authentication. I do not have Windows Azure SSRS and build the code using http://msdn.microsoft.com/en-us/library/gg552871.aspx#Authentication article. It would be nice if somebody from community tested the change or provided me a test report on Windows Azure for testing purposes.

  Read the article

• Locking down a server for shared internet hosting.

  - by Wil

  Basically I control several servers and I only host either static websites or scripts which I have designed, so I trust them up to a point. However, I have a few customers who want to start using scripts such as Wordpress or many others - and they want full control over their account. I have started to do the basics - like on php.ini, I have locked it down and restricted commands such as proc, however, there is obviously a lot more I can do. right now, using NTFS permissions, I am trying to lock down the server by running Application Pools and individual sites in their own user, however I feel like I am hitting brick walls... (My old question on Server Fault). At the moment, the only route I can think of is either to implement an off the shelf control panel - which will be expensive and quite frankly, over the top, or look at the Microsoft guide - which is really for an entire infrastructure, not for someone who just wants to lock down a few servers. Does anyone have any guides that can put me on the correct path?

  Read the article

• Cross-Forest Trust

  - by cdalley

  I am looking at testing a cross-domain trust we can have two domain controllers (with different forests and domain names) setup so we can move everyone onto the new domain. We do NOT run exchange on site and we do not have any links to O365 to AD currently. Onto the problem: I have setup two DCs in a Virtual Machine: They are on the same network 192.168.0.* The Windows 2003 server: Name: OLDSRVR "Clone" of our current Domain Controller IP: 192.168.0.1 Domain: internal.test.com The Windows 2012 server: Name: ADCTEST01 Brand new domain setup from scratch separate to internal.test.com Domain: internal.test2.com IP: 192.168.0.2 OLDSRVR can only see ADCTEST if it has dynamic IP set. If I set a static IP it cannot see it. If I try using the dynamic IP and try to join it gets to the end then complains "??The trust relationship between this workstation and the primary domain failed" Any ideas?

  Read the article

• Rails time stamps on images in CSS

  - by brad

  Just posted this on Stack but realized it may be more appropriate here: So Rails time stamping is great. I'm using it to add expires headers to all files that end in the 10 digit timestamp. Most of my images however are referenced in my CSS. Has anyone come across any method that allows for timestamps to be added to CSS referenced images, or some funky re-write rule that achieves this? I'd love for ALL images in my site, both inline and in css to have this timestamp so I can tell the browser to cache them, but refresh any time the file itself changes. I couldn't find anything on the net regarding this and I can't believe this isn't a more frequently discussed topic. I don't think my setup will matter because the actual expiring will hopefully happen the same way, based on the 10 digit timestamp, but I'm using apache to serve all static content if that matters

  Read the article

• SharePoint For Newbie Developers: Code Scope

  - by Mark Rackley

  So, I continue to try to come up with diagrams and information to help new SharePoint developers wrap their heads around this SharePoint beast, especially when those newer to development are on my team. To that end, I drew up the below diagram to help some of our junior devs understand where/when code is being executed in SharePoint at a high level. Note that I say “High Level”… This is a simplistic diagram that can get a LOT more complicated if you want to dive in deeper.  For the purposes of my lesson it served its purpose well. So, please no comments from you peanut gallery about information 3 levels down that’s missing unless it adds to the discussion.  Thanks So, the diagram below details where code is executed on a page load and gives the basic flow of the page load. There are actually many more steps, but again, we are staying high level here. I just know someone is still going to say something like “Well.. actually… the dlls are getting executed when…”  Anyway, here’s the diagram with some information I like to point out: Code Scope / Where it is executed So, looking at the diagram we see that dlls and XSL are executed on the server and that JavaScript/jQuery are executed on the client. This is the main thing I like to point out for the following reasons: XSL (for the most part) is faster than JavaScript I actually get this question a lot. Since XSL is executed on the server less data is getting passed over the wire and a beefier machine (hopefully) is doing the processing. The outcome of course is better performance. When You are using jQuery and making Web Service calls you are building XML strings and sending them to the server, then ALL the results come back and the client machine has to parse through the XML and use what it needs and ignore the rest (and there is a lot of garbage that comes back from SharePoint Web Service calls). XSL and JavaScript cannot work together in the same scope Let me clarify. JavaScript can send data back to SharePoint in postbacks that XSL can then use. XSL can output JavaScript and initiate JavaScript variables.  However, XSL cannot call a JavaScript method to get a value and JavaScript cannot directly interact with XSL and call its templates. They are executed in there scope only. No crossing of boundaries here. So, what does this all mean? Well, nothing too deep. This is just some basic fundamental information that all SharePoint devs need to understand. It will help you determine what is the best solution for your specific development situation and it will help the new guys understand why they get an error when trying to call a JavaScript Function from within XSL.  Let me know if you think quick little blogs like this are helpful or just add to the noise. I could probably put together several more that are similar.  As always, thanks for stopping by, hope you learned something new.

  Read the article

• Staggering java linux process startup to prevent OOM

  - by ctennis

  I am running a number of java processes on a single Linux machine. From a memory and computing standpoint, everything is fine when things are static. However, periodically we use a configuration management package up upgrade the jar or war files, and restart the java process. The problem is, that is restarts them all relatively quickly, and so we get 10 or so java VMs restarting all at the same time (we use daemontools for the service stops/starts), which wreaks havoc on the machine, in terms of OOMs or just really slow. This is because it's spawning the JVM 10x at the same time. Other than trying to stagger the startups, is there a smarter way of handling this? Maybe a sysctl tuning performance parameters, or a JVM parameter?

  Read the article

• DataContractSerializer truncated string when used with MemoryStream,but works with StringWriter

  - by Michael Freidgeim

  We've used the following DataContractSerializeToXml method for a long time, but recently noticed, that it doesn't return full XML for a long object, but  truncated it and returns XML string with the length of  multiple-of-1024 , but the reminder is not included. internal static string DataContractSerializeToXml<T>(T obj) { string strXml = ""; Type type= obj.GetType();//typeof(T) DataContractSerializer serializer = new DataContractSerializer(type); System.IO.MemoryStream aMemStr = new System.IO.MemoryStream(); System.Xml.XmlTextWriter writer = new System.Xml.XmlTextWriter(aMemStr, null); serializer.WriteObject(writer, obj); strXml = System.Text.Encoding.UTF8.GetString(aMemStr.ToArray()); return strXml; }   I tried to debug and searched Google for similar problems, but didn't find explanation of the error. The most closed http://forums.codeguru.com/showthread.php?309479-MemoryStream-allocates-size-multiple-of-1024-( talking about incorrect length, but not about truncated string.fortunately replacing MemoryStream to StringWriter according to http://billrob.com/archive/2010/02/09/datacontractserializer-converting-objects-to-xml-string.aspxfixed the issue.   1: var serializer = new DataContractSerializer(tempData.GetType());   2: using (var backing = new System.IO.StringWriter())   3: using (var writer = new System.Xml.XmlTextWriter(backing))   4: {   5:     serializer.WriteObject(writer, tempData);   6:     data.XmlData = backing.ToString();   7: }v

  Read the article

• Postfix - exclude messages with specific header values from relayhost?

  - by Kyle MacFarlane

  Starting with the following basic configuration to relay all messages in Postfix to PostMarkApp.com: #start postmarkapps settings smtp_sasl_auth_enable = yes smtp_sasl_password_maps = static:secret:secret (where "secret is your API key") smtp_sasl_security_options = noanonymous relayhost = [smtp.postmarkapp.com]:25 #end postmarkapp settings The problem with this is if for example something starts spitting our error messages they will all go through PostMark and cost money. One way to bypass relayhost is to setup sender_dependent_relayhost_maps and have certain addresses map back to yourdomain.com. But this doesn't work in web apps where all messages are sent by the same user but with varying From headers. So how can I achieve the same effect as sender_dependent_relayhost_maps but looking at the From or Subject headers instead of merely the user?

  Read the article

• Routing Essentials

  - by zharvey

  I'm a programmer trying to fill a big hole in my understanding of networking basics. I've been reading a good book (Networking Bible by Sosinki) but I have been finding that there is a lot of "assumed" information contained, where terms/concepts are thrown at the reader without a proper introduction to them. I understand that a "route" is a path through a network. But I am struggling with visualizing some routing-based concepts. Namely: How do routes actually manifest themselves in the hardware? Are they just a list of IP addresses that get computed at the network layer, and then executed by the transport? What kind of data exists in a so-caleld routing table? Is a routing-table just the mechanism for holding these lists of IP address (read above)? What are the performance pros/cons for having a static route, as opposed to a dynamic route?

  Read the article

• set tap0 using virt-manager for bridged wireless

  - by DaveO

  After 3 days I finally have kvm guests working on the network via wireless (link below - thanks!): My network is 192.168.1.0/24 on the host: sudo sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward" sudo tunctl -t tap0 sudo ip link set tap0 up sudo ip addr add 192.168.1.25/24 dev tap0 sudo route add -host 192.168.1.30 dev tap0 sudo parprouted wlan0 tap0 on the guest: auto eth0 iface eth0 inet static address 192.168.1.30 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.25 and start the guest: sudo kvm /path/to/guest.img -net nic,macaddr=DE:AD:BE:EF:90:26 -net tap,ifname=tap0,script=no This works great and I can ping the local network and the internet back and forth between the guest. But how do I add these settings to the guest's xml config so I can start the guest via virt-manager with the same nic settings? ref: http://www.linuxquestions.org/questions/debian-26/kvm-wireless-bridge-network-691953/

  Read the article

• LinkSys WRT54GL + AM200 in half-bridge mode - UK setup guide recommendations?

  - by Peter Mounce

  I am basically looking for a good guide on how to set up my home network with this set of hardware. I need: Dynamic DNS Firewall + port-forwarding VPN Wake-on-LAN from outside firewall VOIP would be nice QoS would be nice (make torrents take lower priority to other services when those other services are happening) DHCP Wireless + WPA2 security Ability to play multiplayer computer games I am not a networking or computing neophyte, but the last time I messed with network gear was a few years ago, so am needing to dust off knowledge I kinda half have. I have read that I should be wanting to set up the AM200 in half-bridge mode, so that the WRT54GL gets the WAN IP - this sounds like a good idea, but I'd still like to be advised. I have read that the dd-wrt firmware will meet my needs (though I gather I'll need the vpn-specific build, which appears to preclude supporting VOIP), but I'm not wedded to using it. I live in the UK and my ISP supplies me with: a block of 8 static IPs, of which 5 are usable to me a PPPoA ADSL2+ connection

  Read the article

• LinkSys WRT54GL + AM200 in half-bridge mode - UK setup guide recommendations?

  - by Peter Mounce

  Crossposted from here I am basically looking for a good guide on how to set up my home network with this set of hardware. I need: Dynamic DNS Firewall + port-forwarding VPN Wake-on-LAN from outside firewall VOIP would be nice QoS would be nice (make torrents take lower priority to other services when those other services are happening) DHCP Wireless + WPA2 security Ability to play multiplayer computer games I am not a networking or computing neophyte, but the last time I messed with network gear was a few years ago, so am needing to dust off knowledge I kinda half have. I have read that I should be wanting to set up the AM200 in half-bridge mode, so that the WRT54GL gets the WAN IP - this sounds like a good idea, but I'd still like to be advised. I have read that the dd-wrt firmware will meet my needs (though I gather I'll need the vpn-specific build, which appears to preclude supporting VOIP), but I'm not wedded to using it. I live in the UK and my ISP supplies me with: a block of 8 static IPs, of which 5 are usable to me a PPPoA ADSL2+ connection

  Read the article

• What Should I Do? [closed]

  - by Laxmidi

  What is a reasonable goal in terms of traffic for my Flex 3 site: www.brainpinata.com Since I began a couple of months ago, I've gotten roughly 5500 ad views and 280 ad clicks. And the ad revenue is a whopping $4.80. (I don't use Google Adsense). I advertise my site using Google Adwords to try to build traffic. My budget is $10/day. What should I do? a) Push the marketing. Add a blog. Try to get backlinks, contact blogs, start a Facebook page, tweet, etc. b) Google is only indexing the static content in the SWF. The questions/answers are pulled from a mySQL database. So, Google doesn't index 99% of the content. Should I re-do the site in HTML/Javascript and hard-code the questions for each puzzle? (This would be a challenge as I don't know javascript worth squat.) Or should I hard-code the questions in XML and put them in the Flex app? If I put the questions in an XML file it's roughly 500 KB. Other ideas? c) Should I switch ad networks? (I currently get about 100 visitors a day). My ad network pays so little that if I were to make even $500/month, I would need 550,000 ad views/month, which seems impossible. If I go ahead and switch ad networks, I need to find one that allows iFrames as I've got a Flex website. Which ad networks permit their ads to be shown in iFrames? d) Should I cut and run? I put a lot of work into this project and it would really stink to get nothing out of it. I'm looking for some good advice. Looking forward to your suggestions. Thank you. -Laxmidi

  Read the article

• How can I make permanent death in a MUD seem acceptable and fair to players?

  - by Luke Laupheimer

  I have considered writing a MUD for years, and I have a lot of ideas my friends think are really cool (and that's how I'd hope to get anywhere -- word of mouth). Thing is, there's one thing I have always wanted, that my friends and strangers hated: permanent death. Now, the emotional response I get to this is visceral revulsion, every time. I'm pretty sure I am the only person that wants this, or if I'm not, I'm a tiny minority. Now, the reason I want it is because I want the actions of the players to matter. Unlike a lot of other MUDs, which have a set of static city-states and social institutions etc, I want the things my players do, should I get any, to actually change the situation. And that includes killing people. If you kill someone, you didn't send them to time out, you killed them. What happens when you kill people? They go away. They don't come back in half an hour to smack talk you some more. They're gone. Forever. By making death non-permanent, you make death not matter. It would be similar if a climax to a character's arc is getting a speeding ticket. It cheapens it. Non-permanent death cheapens death. How can I: 1) Convince my players (and random people!) that this is actually a good idea?, or 2) Find some other way to make death and violence matter as much as it does in real life (except within the game, of course) sans character deletion? What alternatives are there out there?

  Read the article

• Secure copying (file transfer) between two Linux servers in the same datacenter (Linode)

  - by MountainX

  I have two Linodes in the same data center. I want to copy files from one to the other each night or on demand (for about the next month, until this project is finished). So I'm thinking about using rsync. My question is how do I set up the two Linode servers to communicate via private IP addresses securely? Both servers are SSH hardened, they use denyhosts and have a fairly restrictive iptables setup. I know I need to first assign private IP addresses to each server, then configure static networking according to this guide. What is next? What SSH or iptables settings are needed to allow these two servers to communicate? What further info do I need to supply in this question? I'm looking for a basic step-by-step guide for how to do this.

  Read the article

• Passenger, Apache and avoiding page caching

  - by user38382

  I'm hosting a rack application with passenger and apache. The application is setup to cache the content of each request to the public directory after each request. This allows apache to serve the content directly as a static page for future requests. I would like to tell Apache, presumably through some rewrite rules that any requests with query parameters should not be cached, but instead passed down to the rack application. With a mongrel setup I would just redirect it to the balancer if it meets my rewrite conditions. How do you do the same with passenger?

  Read the article

• Setting up wifi router as a switch for Internet Connection Sharing

  - by William C

  Can my laptop with a 3G connection share its Internet via a Wifi router (Dlink DIR-615)? I turned Internet Connection Sharing on and Windows assigned 192.168.137.1 to my laptop's LAN adapter. Do I connect my laptop to the WAN port or to the LAN port of the router? What should I set as my router's IP address? Do I turn DHCP on my router on? Do I assign 192.168.137.x as static addresses on the other computers? If not, what? Is there anything else I need to set on my router? Thank you!

  Read the article

• dd-wrt switch for PfSense

  - by Kmao

  I currently have eth2 on my pfsense set up, and configured as 192.168.1.1, it has dhcp setup with allocation being 192.168.1.10 - 192.168.1.245. On my dd-wrt box, i disabled the WAN, and set it to act as a port for the switch. I disabled dhcp, dnsmasq, spi firewall, Wlan0 and set a static IP for the router being 192.168.1.10 Pfsense is plugged into lan0 and pc plugged into lan1 (wan port is empty) I have followed a few different guides, but i can't seem to get my router to act as a switch. Anyone have success using DD-WRT as a switch while using pfsense as your dhcp/dns/gateway. Any advice would help :)

  Read the article

• OpenBSD has open ports in default installation

  - by celil

  I have been considering replacing Ubuntu with OpenBSD to improve the security on my local server. I need to have ssh access to it, and I also need it to serve static web content - so the only ports I need open are 22 and 80. However, when I scan my server for open ports after installing OpenBSD 4.8, and enabling ssh and http at /etc/rc.conf httpd_flags="" sshd_flags="" I discovered that it had several other open ports: Port Scan has started… Port Scanning host: 192.168.56.102 Open TCP Port: 13 daytime Open TCP Port: 22 ssh Open TCP Port: 37 time Open TCP Port: 80 http Open TCP Port: 113 ident ssh (22) and http (80) should be open as I enabled httpd and sshd, but why are the other ports open, and should I worry about them creating additional security vulnerabilities? Should they be open in a default installation?

  Read the article

• 12.10 Wireless hotspot configuration and internet browsing - question

  - by Indian

  In our campus we have a leased line connection from a service provider, which has an external IP W.X.Y.Z. This connection is distributed from the server several sub-networks / subnets as follows: Faculty: 172.33....../ 255.255.0.0 Administration: 172.34......./255.255.255.0 Students: 172.35...../255.255.216.0 A student has a laptop with a fixed IP address 172.35.23.123 / 255.255.216.0 where the IP address is on the ethernet port. The gateways for internet access are 172.31.1.1 and 172.31.1.2. Further the student has a wireless port which is inaccessible in the hostel area. The OS of the student is Ubuntu 12.10. The student in the possession of an android phone on which he wishes to install specific software and therefore wishes to activate the internet therein. The student has already attempted the Wireless hotspot solution which works for 12.04 but has not been successful. Various instructions on the internet have helped the student to do the following Installation of dhcp server and hostapd: sudo apt-get install isc-dhcp-server sudo apt-get install hostapd File: /etc/network/interfaces auto lo iface lo inet loopback auto wlan0 iface wlan0 inet static address 10.10.0.1 netmask 255.255.255.0 dns-nameservers 172.31.1.1 172.31.1.2 File: /etc/dhcp/dhcpd.conf subnet 10.10.0.0 netmask 255.255.255.0 { range 10.10.0.2 10.10.0.4; option routers 10.10.0.1; option domain-name-servers 172.31.1.1 172.31.1.2; default-lease-time 6000; max-lease-time 72000; } File: /etc/hostapd/hostapd.conf interface=wlan0 driver=nl80211 ssid=my_hotspot channel=1 hw_mode=g auth_algs=1 wpa=3 wpa_passphrase=1234567890 wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP CCMP rsn_pairwise=CCMP File: /etc/default/hostapd RUN_DAEMON=”yes” DAEMON_CONF=”/etc/hostapd/hostapd.conf” DAEMON_OPTS=”-dd” File: /etc/default/isc-dhcp-server INTERFACES=”wlan0” File: /etc/rc.local iptables -t nat -A POSTROUTING -s 10.10.0.0/16 -o eth0 -j MASQUERADE exit 0 After all the configuration, the computer is restarted. The student can see that the hotspot named “my_hotspot” is available. The hotspot also awards an address to the android phone. The student will now be able to browse the internet.

  Read the article

• What is bondib1 used for on SPARC SuperCluster with InfiniBand, Solaris 11 networking & Oracle RAC?

  - by user12620111

  A co-worker asked the following question about a SPARC SuperCluster InfiniBand network: > on the database nodes the RAC nodes communicate over the cluster_interconnect. This is the > 192.168.10.0 network on bondib0. (according to ./crs/install/crsconfig_params NETWORKS> setting) > What is bondib1 used for? Is it a HA counterpart in case bondib0 dies? This is my response: Summary: bondib1 is currently only being used for outbound cluster interconnect interconnect traffic. Details: bondib0 is the cluster_interconnect $ oifcfg getif            bondeth0  10.129.184.0  global  public bondib0  192.168.10.0  global  cluster_interconnect ipmpapp0  192.168.30.0  global  public bondib0 and bondib1 are on 192.168.10.1 and 192.168.10.2 respectively. # ipadm show-addr | grep bondi bondib0/v4static  static   ok           192.168.10.1/24 bondib1/v4static  static   ok           192.168.10.2/24 Hostnames tied to the IPs are node1-priv1 and node1-priv2  # grep 192.168.10 /etc/hosts 192.168.10.1    node1-priv1.us.oracle.com   node1-priv1 192.168.10.2    node1-priv2.us.oracle.com   node1-priv2 For the 4 node RAC interconnect: Each node has 2 private IP address on the 192.168.10.0 network. Each IP address has an active InfiniBand link and a failover InfiniBand link. Thus, the 4 node RAC interconnect is using a total of 8 IP addresses and 16 InfiniBand links. bondib1 isn't being used for the Virtual IP (VIP): $ srvctl config vip -n node1 VIP exists: /node1-ib-vip/192.168.30.25/192.168.30.0/255.255.255.0/ipmpapp0, hosting node node1 VIP exists: /node1-vip/10.55.184.15/10.55.184.0/255.255.255.0/bondeth0, hosting node node1 bondib1 is on bondib1_0 and fails over to bondib1_1: # ipmpstat -g GROUP       GROUPNAME   STATE     FDT       INTERFACES ipmpapp0    ipmpapp0    ok        --        ipmpapp_0 (ipmpapp_1) bondeth0    bondeth0    degraded  --        net2 [net5] bondib1     bondib1     ok        --        bondib1_0 (bondib1_1) bondib0     bondib0     ok        --        bondib0_0 (bondib0_1) bondib1_0 goes over net24 # dladm show-link | grep bond LINK                CLASS     MTU    STATE    OVER bondib0_0           part      65520  up       net21 bondib0_1           part      65520  up       net22 bondib1_0           part      65520  up       net24 bondib1_1           part      65520  up       net23 net24 is IB Partition FFFF # dladm show-ib LINK         HCAGUID         PORTGUID        PORT STATE  PKEYS net24        21280001A1868A  21280001A1868C  2    up     FFFF net22        21280001CEBBDE  21280001CEBBE0  2    up     FFFF,8503 net23        21280001A1868A  21280001A1868B  1    up     FFFF,8503 net21        21280001CEBBDE  21280001CEBBDF  1    up     FFFF On Express Module 9 port 2: # dladm show-phys -L LINK              DEVICE       LOC net21             ibp4         PCI-EM1/PORT1 net22             ibp5         PCI-EM1/PORT2 net23             ibp6         PCI-EM9/PORT1 net24             ibp7         PCI-EM9/PORT2 Outbound traffic on the 192.168.10.0 network will be multiplexed between bondib0 & bondib1 # netstat -rn Routing Table: IPv4   Destination           Gateway           Flags  Ref     Use     Interface -------------------- -------------------- ----- ----- ---------- --------- 192.168.10.0         192.168.10.2         U        16    6551834 bondib1   192.168.10.0         192.168.10.1         U         9    5708924 bondib0   There is a lot more traffic on bondib0 than bondib1 # /bin/time snoop -I bondib0 -c 100 > /dev/null Using device ipnet/bondib0 (promiscuous mode) 100 packets captured real        4.3 user        0.0 sys         0.0 (100 packets in 4.3 seconds = 23.3 pkts/sec) # /bin/time snoop -I bondib1 -c 100 > /dev/null Using device ipnet/bondib1 (promiscuous mode) 100 packets captured real       13.3 user        0.0 sys         0.0 (100 packets in 13.3 seconds = 7.5 pkts/sec) Half of the packets on bondib0 are outbound (from self). The remaining packet are split evenly, from the other nodes in the cluster. # snoop -I bondib0 -c 100 | awk '{print $1}' | sort | uniq -c Using device ipnet/bondib0 (promiscuous mode) 100 packets captured   49 node1-priv1.us.oracle.com   24 node2-priv1.us.oracle.com   14 node3-priv1.us.oracle.com   13 node4-priv1.us.oracle.com 100% of the packets on bondib1 are outbound (from self), but the headers in the packets indicate that they are from the IP address associated with bondib0: # snoop -I bondib1 -c 100 | awk '{print $1}' | sort | uniq -c Using device ipnet/bondib1 (promiscuous mode) 100 packets captured  100 node1-priv1.us.oracle.com The destination of the bondib1 outbound packets are split evenly, to node3 and node 4. # snoop -I bondib1 -c 100 | awk '{print $3}' | sort | uniq -c Using device ipnet/bondib1 (promiscuous mode) 100 packets captured   51 node3-priv1.us.oracle.com   49 node4-priv1.us.oracle.com Conclusion: bondib1 is currently only being used for outbound cluster interconnect interconnect traffic.

  Read the article

< Previous Page | 508 509 510 511 512 513 514 515 516 517 518 519  | Next Page >