Search Results

Search found 44907 results on 1797 pages for 'how to change the screen'.

Page 522/1797 | < Previous Page | 518 519 520 521 522 523 524 525 526 527 528 529  | Next Page >

  • Toshiba A205-5804 freezes when plugged in

    - by heron
    Well I have a Toshiba A205-5804 and the problem is that the screen freezes anytime I plug the pc into the external power supply, not as most of the computers having the same issue, my computer DOES freeze in safe mode, and I really can't bear this problem for much longer... It's not an overheating problem, the computer is not getting hot or anything related, I've already tried changing the AC adapter, booting only with AC and no battery, and also all of these suggestions: Try changing the following setting in the bios setup, under the 'Advanced' tab Dynamic CPU Frequency: Mode = Always Low (NOT DYNAMIC) My laptop has been running on AC power without a problem for 24hours, including many restarts, and when I went back to the original bios setting, the problem returned almost straight away. EDIT Other suggestions I found on the web from here and here: Set the power plan to high performance Set the power plan to "Minimal Power Management" (1 and 2 do conflict) Start - Control Panel - Device Manager -- Processor - disable one of two processors - reboot normally 4.Do this: Only plug battery into laptop Turn on the laptop and start Windows normally Plug AC adapter into laptop, the screen will freeze Leave the laptop the way it is for 12-24 hours After 12-24 hours, turn it off the hard way Once it is turned off, turn it back on. The laptop is working now. I have no idea of what can it be...

    Read the article

  • Can't see more than the first few lines in an SSH connection

    - by hello
    I need some help for SSH buffer size. I have a vista machine at home and i have installed "Free SSHD" on it. I also have Dynamic DNS setup to access some of my home lab equipment which are connected to this vista machine. From my work machine which is an XP machine I connect to my home machine using Putty. Everything up to this point is working fine without any problem. The issue is I can't see more lines than the first few lines of the output. I press the space bar to get more output off the screen and the output scrolls up and it gets lost as the more output gets displayed on the screen. The Putty client i am using on my work machine has been setup with enough buffer size but the output still only displays few lines and as it moves up, the buffer gets empty automatically. I have searched the entire web and haven’t found any proper solution any where. Can someone please help here? Thanks.

    Read the article

  • Excel chart won't update, based on calculated cells

    - by sam SJL
    I have an Excel document (2007) with a chart (Clustered Column) that gets its Data Series from cells containing calculated values The calculated values never change directly, but only as a result of other cells in the sheet changing When I change other cells in the sheet, the Data Series cells are recalculated, and show new values - but the Chart based on this Data Series refuses to update automatically I can get the Chart to update by saving/closing, or toggling one of the settings (such as reversing x/y axis and then putting it back), or by re-selecting the Data Series Every solution I have found online doesn't work - I have Calculation set to automatic - Ctrl+Alt+F9 updates everything fine, EXCEPT the chart - I have recreated the chart several times, and on different computers - I have tried VBA scripts like: Application.Calculate Application.CalculateFull Application.CalculateFullRebuild ActiveWorkbook.RefreshAll DoEvents None of these update or refresh the chart I do notice that if I type over my Data Series, actual numbers instead of calculations, it will update the chart - it's as if Excel doesn't want to recognize changes in the calculations Has anyone experienced this before or know what I might do to fix the problem? Thank you

    Read the article

  • How to redirect domain to new server?

    - by hfidgen
    I've got a domain registered with a hosting company who I no longer wish to use. I'm happy for them to keep managing my domain, but I want my domain to point to my new (better) server which i've just bought and set up. I know my new server's IP address and Nameservers, What do I need to do in my domain management control panel to make it point to my new server? Change the "A" record to the new IP? Change the nameservers to my new hosts nameservers? Is that it? Are there no other record on either server which need changing? I always get confused by who needs to do what when it comes to domains... Thanks, Hugh

    Read the article

  • Time randomly changing itself, internet randomly dying

    - by Vee
    Operating System MS Windows 8 Enterprise 64-bit CPU Intel Core i7 2700K @ 3.50GHz 45 °C Sandy Bridge 32nm Technology RAM 8,00 GB Dual-Channel DDR3 @ 800MHz (8-8-8-24) Motherboard ASRock Z77 Extreme4-M (CPUSocket) 40 °C Graphics SMXL2270HD (1920x1080@60Hz) M2094D-PZ (1680x1050@60Hz) 896MB GeForce GTX 275 (CardExpert Technology) 57 °C Hard Drives 466GB FUJITSU MAXTOR STM3500320AS (SATA) 39 °C Optical Drives ASUS DRW-2014L1T Audio High Definition Audio Device Hello everyone, I installed Windows 8 RTM a few weeks ago. It's not my first time installing it, but it's the first time having two annoying problems: 1) Randomly, the system clock changes time all by itself - to fix it I have to open the time window and sync it with the internet. 2) Randomly, internet connection stops working - to fix I have to run troubleshooting. Windows will find a problem with IP on the "Ethernet" connection and fix it. 3) In rare occasions, my PC freezes and I need to restart it (a BSOD once happened, but after that only freezes) How can I permanently solve these problems? This is what I've already tried: Reset Virus scan Stop/reset the Windows Time service Disable/re-enable Windows Time automatic internet sync Change time from BIOS Change motherboard battery

    Read the article

  • xrandr fails when 3rd monitor has higher resolution

    - by Pi3cH
    I tried many combinations with xrandr command under lubuntu 12.04 to setup my three monitors DVI (DELL 1) left detected as HDMI1 HDMI (LG E2290) middle detected as HDMI2 VGA (DELL 2) right detected as VGA1 I can get the display with fix 1280x1024 on all the monitors. But once I setup 1280x1024 + 1920x1080 + 1280x1024, I get blank screen on all the monitors. Sometimes it throws crts fail error instead of blanking out. Anyone have similar issues? any solutions/workarounds? P.S. I can setup two monitors using 1280x1280 and 1920x1080 P.S.S. HDMI2 required at least 1920x1080 to display sharp picture. Outputs (it seems graphic card supports up to 8192x8192): xrandr Screen 0: minimum 320 x 200, current 3840 x 1024, maximum 8192 x 8192 VGA1 connected 1280x1024+2560+0 (normal left inverted right x axis y axis) 338mm x 270mm 1280x1024 60.0*+ 75.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 HDMI1 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 376mm x 301mm 1280x1024 60.0*+ 75.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 HDMI2 connected 1280x1024+1280+0 (normal left inverted right x axis y axis) 477mm x 268mm 1920x1080 60.0 + 1680x1050 60.0 1280x1024 75.0 60.0* 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 DP1 disconnected (normal left inverted right x axis y axis) DP2 disconnected (normal left inverted right x axis y axis) 3 CRTs (0,1 VGA, 0,1,2 for other HDMI) xrandr --verbose VGA1 connected 1280x1024+2560+0 (0x47) normal (normal left inverted right x axis y axis) 338mm x 270mm Identifier: 0x42 Timestamp: 51324 Subpixel: unknown Gamma: 1.0:1.0:1.0 Brightness: 1.0 Clones: CRTC: 0 CRTCs: 0 1 ... HDMI1 connected 1280x1024+0+0 (0x47) normal (normal left inverted right x axis y axis) 376mm x 301mm Identifier: 0x43 Timestamp: 51324 Subpixel: unknown Gamma: 1.0:1.0:1.0 Brightness: 1.0 Clones: CRTC: 1 CRTCs: 0 1 2 ... HDMI2 connected 1280x1024+1280+0 (0x47) normal (normal left inverted right x axis y axis) 477mm x 268mm Identifier: 0x44 Timestamp: 51324 Subpixel: unknown Gamma: 1.0:1.0:1.0 Brightness: 1.0 Clones: CRTC: 2 CRTCs: 0 1 2 Below command fails: xrandr --output VGA1 --auto --output HDMI2 --auto --left-of VGA1 --output HDMI1 --auto --left-of HDMI2 Below command passes: xrandr --output VGA1 --auto --output HDMI2 --mode 1280x1024 --rate 60.0 --left-of VGA1 --output HDMI1 --auto --left-of HDMI2 Graphic card VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09)

    Read the article

  • Are these three brand new sticks of RAM really dead?

    - by David Brown
    I'm working on a Dell Dimension 4700 desktop for a friend. It came with 512MB of DDR2 RAM (two sticks of 256MB). One morning, it started blue screening on startup with no helpful error messages. It refused to boot into any form of Windows installation, including Safe Mode, original recovery disk, and my custom Windows PE disk. It did boot into the Ultimate Boot CD, so I ran memtest86, which reported errors everywhere. I removed one stick of RAM and the system booted up just fine. I moved the remaining stick into each slot and the system continued to operate normally, so I came to the conclusion that the stick that I removed was dead. I ordered an exact replacement, along with 2 more sticks of 256MB DDR2 (again, exactly the same as the original), bringing the total system memory to 1GB. Upon installing the three brand new sticks, the system blue screened again, this time stating that win32k.sys attempted to write to read-only memory. I inserted my custom Windows PE disk in order to get a better look at the memory dump with BlueScreenView, but it refused to boot and produced another blue screen, but without an error message. I removed each new stick one-by-one, restarting each time. It continued to blue screen until I was left with only the original stick. I then tried inserting the new sticks in various different orders, but this only produced more blue screens. I reinserted all three sticks (along with the original) and ran memtest86 again, which reported errors all over the place. So, now I'm right back where I started. I don't think it could be the slots themselves, because I can plug the original stick into any slot and it works just fine. System setup reports each stick correctly and shows the total as 1GB, however. It just seems strange to me that all three brand new sticks of RAM could be dead on arrival. Is there something I missed? Or should I just go ahead and RMA them?

    Read the article

  • Outlook 2007 panes keep moving when changing resolution

    - by SilverbackNet
    This problem is really bugging one of our users ever since he got a larger monitor. Now that the monitor has a different resolution than his laptop, every time he unplugs it to go home, the three Outlook panes get all jumbled up. The navigation is huge, the list is shoved over, and the reading pane is almost smushed out of existence, the the opposite when he comes back in and the reading pane fills the screen. He's sick of adjusting it every day. He always runs it maximized, for maximum reading area. Keeping the application within a 1024x768 window wouldn't really be an option for him. Is there any way built into Outlook to automatically adjust pane sizes when the resolution changes? If not, is there a third-party app that can help, or a way to script the changes into the registry somehow? (I can do running the script whenever the screen state changes.) If this is fixed in 2010 I might be able to convince the other admin that this is a good enough reason to allow it (which will require a new beta version of our archiving software).

    Read the article

  • IBM WebSphere Host On-Demand (HoD): Cannot run program with "runprogram" command. What can I do?

    - by kokbira
    I access a system that uses an IBM Host on Demand client. I am tryig to create a macro to do a hard task (more than 90,000 keys must be pressed to complete it), but to do it easier I need to call some "external" aplications using "runprogram" tag. But I don't know why it does not function (following IBM help - http://publib.boulder.ibm.com/infocenter/hodhelp/v11r0/index.jsp?topic=/com.ibm.hod.doc/doc/macro/macro.html - did not help...). I am running in Firefox 3.6 and my Java version is jdk1.6.0_20. Below, an example of macro that should function, but didn't. <HAScript name="TEST4" description="" timeout="60000" pausetime="300" promptall="true" blockinput="false" author="wingman" creationdate="05/05/2011 16:14:31" supressclearevents="false" usevars="false" ignorepauseforenhancedtn="true" delayifnotenhancedtn="0" ignorepausetimeforenhancedtn="true"> <vars> <create name="$intReturn$" type="integer" value="0" /> </vars> <screen name="Tela1" entryscreen="true" exitscreen="false" transient="false"> <description > <oia status="NOTINHIBITED" optional="false" invertmatch="false" /> </description> <actions> <runprogram exe= "'c:\\Program Files\\Windows NT\\Accessories\\Wordpad.exe'" param="'c:\\a.txt'" wait="true" assignexitvalue="$intReturn$" /> <message title="" value="'Return value is '+$intReturn$" /> </actions> <nextscreens timeout="0" > </nextscreens> </screen> </HAScript>

    Read the article

  • Acer Aspire Touchscreen Not Responding

    - by Jerry
    I have an Acer Aspire z3101 all-in-one Touch screen running Windows 7 Home Premium. I am unable to get the screen to respond to my touch. I have checked the system and all drivers are ok according to comp. Using the settings to setup the pen and touch and to calibrate does not work. My touch brings no response at all. I had reinstalled the applications - Windows Touch Pack and Acer Touch Portal which didn't help. Today I done a complete reinstall returning comp back to factory settings and still there is no response. At first I thought that perhaps a driver or file was missing but now doubt that due to the reinstall not helping. Have you any idea what could be causing this problem? I am now at the stage of pulling my hair out and haven't had too much help from Acer. I have had the computer for just over a year now and so it is no longer under guarantee and this has me very worried due to my being unemployed. Any help is much appreciated. Thank you.

    Read the article

  • Dell laptop keyboard doesn't work

    - by Tam
    I'm trying to fix my in-laws laptop, it's a Dell Studio 1745 that's running Windows 7 64 bit. The problem is that most of the keys on the keyboard do not work. The function keys work and the caps lock and numpad keys work, but no other keys do. If I hit the F2 key enough times when starting up, I can get to the BIOS, but after that even the function keys stop working. If I let it go all the way to the Windows login screen, I can see that the caps lock and num lock work - little images on screen actually appear, but they don't toggle the state of the key, i.e.,capslock is always off, numlock is always off. Using the fn+function combo works, so changing the brightness, etc. works fine. I'm stumped. I've tried disconnecting power and battery and leaving it for an hour or so before starting up but that hasn't helped either. Also - this might be a red herring - the touchpad is failing as well, the MS Device Manager says that it's failing with status 10, "unable to start device"

    Read the article

  • How to diagnose issue between mobo, RAID, and SSD cache drive? [migrated]

    - by goober
    Background This issue is happening on my custom-built desktop. Relevant specs: Motherboard: ASUS P8Z68-V PRO Utilizing Intel RST technology (application that uses unused SSD as cache) Processor: Intel core i7-2600k (not overclocked) HDDs: RAID1 of 2x Seagate Barracuda 1TB (ST31000524AS) (RAID performed via z68 chipset) Machine has run fine for ~1 year with no issues, and has been well-maintained (dust, etc.) What Happened Random Freezing issues -- intermittent Looked at the RST application screen to see that the acceleration cache was listed as "unavailable" -- recommended that I power down and reconnect the drive. Reconnected the drive to no avail. Attempted to move the drive to another SATA port. Acceleration option disappeared from RST software. Now, the freeze happens whenever loading something particularly data-driven (a video, a game, etc.) Steps Attempted Reconnected the drive to no avail. Updated Intel RST software to v. 11.6.0.1030 to see if that made a difference. Attempted to move the drive to another SATA port. Acceleration option disappeared from RST software. Connected the drive as its own volume. Formatted it, ran disk check errors -- all seems fine. Reconnected the drive and selected it again as the cache drive. Now, what happens when there is a freeze: Machine freezes I am unable to perform any command Screen then goes black I hit the reset button During boot, all drives show as "Disabled" and I am told no volume can be found I then hit the reset button (or power off/on) again. Either the next time (or sometimes after repeating this once more), the metadata cache is reconstructed and the system boots fine, showing the SSD as a cache. Question I believe this is an issue with the SSD itself, but how can I be sure since connecting it separately appeared to show no problems? I want to make sure it's not an issue with the motherboard, SATA ports, etc.

    Read the article

  • Brightness Controls not working on HP Dm3t

    - by Karim
    i have an HP dm3t notebook which normally comes with windows 7. after some time i figured out how to install Windows XP on it. but now i am facing a problem that the brightess controls dont work so i am unable to change the brightess. the strange thing is that all the other buttons (sound volume, mute, sleep , etc... ) works but not the 2 brightess controls. i already downloaded the "HP Quick Launch Buttons" so i am asking about suggesitions how can i enable these two buttons in windows XP or even if i can change the brightess using some kind of software. thanks

    Read the article

  • System randomly freezes yet mouse still moves, SSD out of reallocatable sectors, should I replace it?

    - by user784446
    This problem has lasted for the past 48 hours. The first time it happened, a program I was running stopped responding, so I tried to end it from task manager. The processes at first were listed fine until hovered upon. Eventually, despite the mouse still being able to move, after a few persisting clicks the mouse finally stopped moving. The screen went blank shortly thereafter. The second time it occurred, items on the screen stopped responding - hovering over the taskbar or such wouldn't elicit a response. Sound would still play however. Eventually, the mouse became unresponsive and the system restarted itself. I suspect that it may be a problem of my SSD drive. After looking through some Google search results, I downloaded HDTunePro to determine if there's a problem with the drive. Results returned a problem of reallocated sector count. An error scan also revealed 48 bad sectors. Also, an attempt to backup the contents of the most important areas of the drive returned a few explorer "Error: cannot read source from disk" errors. Should I ditch the drive and use another drive or is there anything that can be done to repair the drive? SSD: OCZ Petrol 64gb CPU: AMD Athlon II X4 640 RAM: Generic 3GB DDR2 Motherboard: Gigabyte MA74GM-S2H OS: Windows 7 Ultimate x64 Thanks!

    Read the article

  • How can I get Windows to apply its settings?

    - by Jouke van der Maas
    I have a computer with a major problem; it gives a blue screen when the login screen loads. I've been using this guide to troubleshoot the issue, and now I've run into a problem. I have determined the issue is not bad memory or a bad hard drive. According to the guide, this means the problem is in the OS. I've tried to follow the steps, but Windows (Vista SP1) somehow doesn't remember any changes. On every reboot, the computer is in exactly the same state it was in before. Any changes to system settings or files won't be recorded. As this means I can't check what is causing the problem, I can't fix my PC. Is there a way to find out what's causing this? Is it just a mode Windows goes into to protect itself, or is it some other problem? Anything to help troubleshoot will be of great help here. PS. I'm kind of new to this site. If I messed up, please tell me in the comments.

    Read the article

  • AA doesn't work due to monitor?

    - by MikeQ
    I have a monitor (with TV tuner - Philips 221T1SB), native resolution of 1920x1080, but there is an Overscan in Catalyst. It says from left to right '10%' and '0%', if i set it (all the way to the left) on 10%, i get screen with black borders (you know what i mean), but if i set it to 0%, i get a filled monitor. It does make sense, but why the hell is there such an option? I never had any AA issues before, but now, with this monitor, here they go. I can't find any solution, i have only one lead = overscan, or pretty much anything with the CCC settings. Yes, i almost forgot. After a bit of trying to configure the monitor with remote, i found there is a PC channel option, few other channels, and then a HDMI option. I have monitor through HDMI, but why i get black screen when i select the PC channel? That might be another problem. I tried almost everything. Please guys, give me a hand. I don't want jaggies! CPU: Intel I5-750 @4,0GHz RAM: Corsair Vengeance 8GB 1600MHz GPU: AMD Gigabyte HD 7950 Windforce @1100/1400, 1,174V Motherboard: ASUS P7P55D-E EVO

    Read the article

  • CMD file time not always matching windows explorer file time

    - by skyrail
    I have a set of file I need to set the created, modified and last access date to exif date taken value, after a copy between 2 folders (might be fat32 on memory card or ntfs on fixed or usb disk). When I copy a file, the date and time switch to the current date. Then I change all 3 dates manually, either with change attributes in windows explorer or far manager on the command line. To make it faster I wrote a batch script getting original file dates (with php and function stat), building a batch script that invoke nircmd setfiletime for each file. Then I apply this batch to the copied version. The operation is relatively fast and reliable. Unfortunately, a bunch of files have last access and created time different in cmd and windows explorer (1H difference). Very strangely, it happens with dates between november and february, which make the operation unreliable. Why is this happening, and how can I fix it?

    Read the article

  • Installed Windows 7 Ultimate on D Drive and previous Windows 7 Enterprise on C Drive has stopped starting up

    - by teenup
    Please please help! I have installed Windows 7 Ultimate on same hard drive on D Drive on my laptop and the previous Windows 7 Enterprise which was installed on C Drive is not booting up now. When I turn on my laptop, I see two Windows 7 on the screen, when I select newer one, it starts, but when I select older one which is Enterprise edition, system won't start and I get the DOS black screen with this error message: Windows Boot Manager Windows failed to start. A recent hardware or software change might be the cause. To fix the problem: Insert your Windows installation disc and restart your computer. Choose your language settings, and then click "Next." Click "repair your computer." Info: The boot selection failed because a required device is inaccessible. I notice that when I run the newer OS installed, the previous OS's drive (Which is D: now instead of C:) has become unusable and when I double click it, it asks me to format the drive. The data, that I had on my D Drive (Which is now C Drive for new OS), I had copied it to a network path and it is available. It was containing Windows 7 Users folder which I copied at that time when installing new windows. I have copied that Users folder again to the new OS's C Drive thinking it would run again, but of no use. Please please please...if someone can help...It is extremely required for me. Thanks a lot in advance.

    Read the article

  • DRBD as a block device for XEN VM (Centos 5.3)

    - by SaberTooth
    Hi all, I have setup a drbd resource between 2 server nodes - everything works correctly when doing sync tests between the two. (I want to create a HA cluster using drbd,xen and heartbeat) However, when I try and create a XEN VM with Centos as guest operating system, I get through to the partitioning screen on the install but when I select a partitioning type the next screen gives me the following error : "An error has occurred - no valid devices were found on which to create new file systems. Please check your hardware for the cause of this problem." This is the first time attempting create a setup like this and searching Google does not help much... my config files for DRBD and XEN.... DRBD (just the section that is pertinent) on xennode0 { device /dev/drbd0; disk /dev/sda5; address X.X.X.X:7788; flexible-meta-disk internal; } on xennode1 { device /dev/drbd0; disk /dev/sda5; address X.X.X.X:7788; meta-disk internal; } XEN kernel = "/boot/xeninstall/vmlinuz" ramdisk = "/boot/xeninstall/initrd.img" extra = "text" name = "VM" maxmem = 3000 memory = 3000 vcpus = 4 on_poweroff = "destroy" on_reboot = "restart" on_crash = "restart" vfb = [ ] disk = [ "phy:/dev/drbd0,sda1,w", "tap:aio:/srv/xen/xenswap.img,sda2,w" ] vif = [ "mac=00:16:3e:11:67:ae,bridge=xenbr0" ] root = "/dev/sda1 ro" Thanks in advance!

    Read the article

  • TrueCrypt with blank password

    - by TheSavo
    This might sound like an odd question, but please hear me out. I want to setup my laptop to use TrueCrypt, but without a password. My wife doesn't travel much with her notebook. There are occasions where we will have to travel and bring the notebook with us. This is when we would like the have the encryption. The time it takes to to change the unlock pass-phrase is considerably less than it takes to encrypt the drive. My thoughts are to leave the disk encrypted but with no password. Then when it's time to pack for a trip and bring the laptop, we would then change the pass-phrase and create a rescue disk.

    Read the article

  • PATH variable recently changed

    - by Dan
    $ loopy Command 'loopy' is available in '/usr/games/loopy' The command could not be located because '/usr/games' is not included in the PATH environment variable. loopy: command not found Every answer I've found just says to add it to my .profile... but this should be be in the PATH for all users, and was up until recently (I have no idea what would have caused it to change). How can I solve this on my system for all users? What could have caused this to change? Thanks.

    Read the article

  • NVidia TwinView - slow rendering on dual desktop [closed]

    - by lisak
    Hey, does anybody have experience with it ? I've set it up 4 times on 4 different machines. And there was always problems with slow rendering ( for instance : scrolling pages in browser is not fluent). But there always was something that finally made it work perfectly... I remember that one time this option helped, but not now Option "RenderAccel" "1" Nvidia geforce 8400GS or Zotac geforce 9500GT Monitors connected via dvi and hdmi connectors proper nvidia driver installed Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" Option "Xinerama" "0" EndSection Section "Files" ModulePath "/usr/lib64/xorg/modules" FontPath "/usr/share/fonts/local" FontPath "/usr/share/fonts/TTF" FontPath "/usr/share/fonts/OTF" FontPath "/usr/share/fonts/Type1" FontPath "/usr/share/fonts/misc" FontPath "/usr/share/fonts/CID" FontPath "/usr/share/fonts/75dpi/:unscaled" FontPath "/usr/share/fonts/100dpi/:unscaled" FontPath "/usr/share/fonts/75dpi" FontPath "/usr/share/fonts/100dpi" FontPath "/usr/share/fonts/cyrillic" EndSection Section "Module" Load "dri2" Load "glx" Load "extmod" Load "record" Load "dbe" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Acer AL1715" HorizSync 30.0 - 83.0 VertRefresh 50.0 - 75.0 EndSection Section "Device" Identifier "Nvidia" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "MSI big bang-fuzion" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 8400 GS" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "RenderAccel" "1" Option "AllowGLXWithComposite" "1" Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-1" Option "metamodes" "CRT: 1280x1024 +1920+0, DFP: 1920x1080 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

    Read the article

  • some keys don't appear in xev

    - by sazary
    i can't change my screen brightness by pressing brightness keys on the keyboard, but they change through /sys/class/backlight/acpi_video0/brightness. so i started to diagnose the issue, ran xev and trying to see what happens when i press Fn+F5 or Fn+F6 which are brightness controls, and xev didn't show anything. i must note that it notifies my when i press volume controls, for example. are F5 and F6 keys working? yes, but not when i press them with Fn key. do i have any entry in xmodmap for brightness? yes: keycode 232 = XF86MonBrightnessDown NoSymbol XF86MonBrightnessDown keycode 233 = XF86MonBrightnessUp NoSymbol XF86MonBrightnessUp what's happening? and what should i do to correct it? i'm using vaio s series laptop with kubuntu precise on it. thanx ;)

    Read the article

  • System x3550 M2 stuck on system initializing after firmware upgrades

    - by itmanager223
    Hey guys so i have been having this major issue for the last few hours now. I have a system x 3550M2 server and i ran the UEFI and IMM firmware upgrades within windows server 2008 R2 x64. All upgrades went fine and i was told to reboot. I performed the reboot cleanly using the OS restart option. Upon restarting it showed the system initializing screen and it stayed there for a good hour. After that hour i figured it froze and so i powered down and power up again. Now i can not boot back up to even see the IBM splash screen or the OS... I have tried switching the Jumpers to go to the backup UEFI and backup IMM and no luck. I have also reset the CMOS power and i have pressed the reset button 3 times on the light path and no luck. There are no lights light on the light path to indicate anything is broken. The only thing i see on the light path is the number 0.5. Any ideas guys i am quite stumped with this problem. Thanks a lot, Dani Cela

    Read the article

< Previous Page | 518 519 520 521 522 523 524 525 526 527 528 529  | Next Page >