Search Results

Search found 18937 results on 758 pages for 'missing controls'.

Page 535/758 | < Previous Page | 531 532 533 534 535 536 537 538 539 540 541 542  | Next Page >

• Wired and Wireless Network Issues with PPPoE

  - by user9054

  down vote favorite Hi Friends, I have got this issue with Ubuntu 10.10. I have been with ubuntu 8.04 and then decided to try out ubuntu 10.10 . I booted with a LiveCD and was able to configure the wireless network painlessly using the livecd. So happily i installed ubuntu 10.10. As soon as ubuntu came up it detected the wireless network and i was able to assign a static IP to eth1 (i dont use DHCP option on my ADSL router) and enter a wap key and use pppoeconf to configure the dialer. The net was on and i was able to surf the net. All hunky dory so far. However on the next boot the fun started. It did not detect the wireless network. I could not see the network manager icon in the systray. I used ifconfig and saw that the entry for eth1 was missing. I used ifup eth1 and it said that eth1 was already up . Then i installed wifi-radar. Wifi-Radar detected the wireless network. I configured wifi-radar for the detected wireless network , set the wap driver as wext and used the manual IP settings. However on clicking connect wifi-radar started looking for a DHCP IP , needless to say it failed. For the love of god i cannot understand why wifi-radar is using DHCP when i have specified manual settings . Next i decided to use the wired network to surf the net looking for a solution . So i plugged in the network cable from my modem , it detected the plugged in connection , i configured eth0 , used pppoeconf and connected to the net. Then i foolishly decided to reboot my PC. And wonders of wonders , the same problem appeared. I cannot see eth0 in my ifconfig anymore. I used pon to start the dsl-provider connection and it said something about network error or something . Now my ifconfig shows only lo , both eth0 and eth1 have disappeared. Can anybody help me on this ? Is it a problem with ipv6 , if so how do you disable ipv6 on ubuntu 10.10 ? OR is this is a known issue with ubuntu 10.10 ? PS : 1) i tried linux mint 10 and had the same issue. On rebooting wireless network was not getting detected . 2) i have made myself the administrator so that there is no issue of rights or anything. Any help is appreciated.

  Read the article

• Another question about handling game states

  - by Eva

  I'm making a game designed with the entity-component paradigm that uses systems to communicate between components as explained here. I've reached the point in my development that I need to add game states (such as paused, playing, level start, round start, game over, etc.), but I'm not sure how to do it with my framework. I've looked at this code example on game states which everyone seems to reference, but I don't think it fits with my framework. It seems to have each state handling its own drawing and updating. My framework has a SystemManager that handles all the updating using systems. For example, here's my RenderingSystem class: public class RenderingSystem extends GameSystem { private GameView gameView_; /** * Constructor * Creates a new RenderingSystem. * @param gameManager The game manager. Used to get the game components. */ public RenderingSystem(GameManager gameManager) { super(gameManager); } /** * Method: registerGameView * Registers gameView into the RenderingSystem. * @param gameView The game view registered. */ public void registerGameView(GameView gameView) { gameView_ = gameView; } /** * Method: triggerRender * Adds a repaint call to the event queue for the dirty rectangle. */ public void triggerRender() { Rectangle dirtyRect = new Rectangle(); for (GameObject object : getRenderableObjects()) { GraphicsComponent graphicsComponent = object.getComponent(GraphicsComponent.class); dirtyRect.add(graphicsComponent.getDirtyRect()); } gameView_.repaint(dirtyRect); } /** * Method: renderGameView * Renders the game objects onto the game view. * @param g The graphics object that draws the game objects. */ public void renderGameView(Graphics g) { for (GameObject object : getRenderableObjects()) { GraphicsComponent graphicsComponent = object.getComponent(GraphicsComponent.class); if (!graphicsComponent.isVisible()) continue; GraphicsComponent.Shape shape = graphicsComponent.getShape(); BoundsComponent boundsComponent = object.getComponent(BoundsComponent.class); Rectangle bounds = boundsComponent.getBounds(); g.setColor(graphicsComponent.getColor()); if (shape == GraphicsComponent.Shape.RECTANGULAR) { g.fill3DRect(bounds.x, bounds.y, bounds.width, bounds.height, true); } else if (shape == GraphicsComponent.Shape.CIRCULAR) { g.fillOval(bounds.x, bounds.y, bounds.width, bounds.height); } } } /** * Method: getRenderableObjects * @return The renderable game objects. */ private HashSet<GameObject> getRenderableObjects() { return gameManager.getGameObjectManager().getRelevantObjects( getClass()); } } Also all the updating in my game is event-driven. I don't have a loop like theirs that simply updates everything at the same time. I like my framework because it makes it easy to add new GameObjects, but doesn't have the problems some component-based designs encounter when communicating between components. I would hate to chuck it just to get pause to work. Is there a way I can add game states to my game without removing the entity-component design? Does the game state example actually fit my framework, and I'm just missing something?

  Read the article

• Going by the eBook

  - by Tony Davis

  The book and magazine publishing world is rapidly going digital, and the industry is faced with making drastic changes to their ways of doing business. The sudden take-up of digital readers by the book-buying public has surprised even the most technological-savvy of the industry. Printed books just aren't selling like they did. In contrast, eBooks are doing well. The ePub file format is the standard around which all publishers are converging. ePub is a standard for formatting book content, so that it can be reflowed for various devices, with their widely differing screen-sizes, and can be read offline. If you unzip an ePub file, you'll find familiar formats such as XML, XHTML and CSS. This is both a blessing and a curse. Whilst it is good to be able to use familiar technologies that have been developed to a level of considerable sophistication, it doesn't get us all the way to producing a viable publication. XHTML is a page-description language, not a book-description language, as we soon found out during our initial experiments, when trying to specify headers, footers, indexes and chaptering. As a result, it is difficult to predict how any particular eBook application will decide to render a book. There isn't even a consensus as to how the cover image is specified. All of this is awkward for the publisher. Each book must be created and revised in a form from which can be generated a whole range of 'printed media', from print books, to Mobi for kindles, ePub for most Tablets and SmartPhones, HTML for excerpted chapters on websites, and a plethora of other formats for other eBook readers, each with its own idiosyncrasies. In theory, if we can get our content into a clean, semantic XML form, such as DOCBOOKS, we can, from there, after every revision, perform a series of relatively simple XSLT transformations to output anything from a HTML article, to an ePub file for reading on an iPad, to an ICML file (an XML-based file format supported by the InDesign tool), ready for print publication. As always, however, the task looks bigger the closer you get to the detail. On the way to the utopian world of an XML-based book format that encompasses all the diverse requirements of the different publication media, ePub looks like a reasonable format to adopt. Its forthcoming support for HTML 5 and CSS 3, with ePub 3.0, means that features, such as widow-and-orphan controls, multi-column flow and multi-media graphics can be incorporated into eBooks. This starts to make it possible to build an "app-like" experience into the eBook and to free publishers to think of putting context before container; to think of what content is required, be it graphical, textual or audio, from the point of view of the user, rather than what's possible in a given, traditional book "Container". In the meantime, there is a gap between what publishers require and what current technology can provide and, of course building this app-like experience is far from plain sailing. Real portability between devices is still a big challenge, and achieving the sort of wizardry seen in the likes of Theodore Grey's "Elements" eBook will require some serious device-specific programming skills. Cheers, Tony.

  Read the article

• The only metric with any value

  - by Malcolm Anderson

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} There's a lot of talk in the Scrum world about metrics. What's the velocity? How big is a story point?  How many story points is that team producing per man hour?   People are sadly missing the whole point.  Take your measurements up a level or two.  When you get down to it, the only metric that makes any difference, is ROI.   The problem is that often times, the developers work in a dark hole, far removed from the realities of how exactly they get paid.  A bigger problem is that mid-level managers tend to be further removed from the realities of ROI.  A lot of times mid-level managers get tasked with tracking their teams "productivity" using things like, "lines of code", or "completeness of the productivity reports."   Monetize your projects and then track your velocity against business value (real dollars).    When your development teams can say, "Last year, our team cost the business 2 million dollars and we know that because of our efforts, the company saved 2 million dollars in waste and increased revenues by another 4 million dollars." At that point you have just moved your development team from a cost center, to a profit center.  You might have to give them a raise, but they have demonstrated that they have earned it.

  Read the article

• How to handle encryption key conflicts when synchronizing data?

  - by Rafael

  Assume that there is data that gets synchronized between several devices. The data is protected with a symmetric encryption algorithm and a key. The key is stored on each device and encrypted with a password. When a user changes the password only the key gets re-encrypted. Under normal circumstances, when there is a good network connection to other peers, the current key gets synchronized and all data on the new device gets encrypted with the same key. But how to handle situations where a new device doesn’t have a network connection and e.g. creates its own new, but incompatible key? How to keep the usability as high as possible under such circumstances? The application could detect that there is no network and hence refuse to start. That’s very bad usability in my opinion, because the application isn’t functional at all in this case. I don’t consider this a solution. The application could ignore the missing network connection and create a new key. But what to do when the application gains a network connection? There will be several incompatible keys and some parts of the underlying data could only be encrypted with one key and other parts with another key. The situation would get worse if there would be more keys than just two and the application would’ve to ask every time for a password when another object that should get decrypted with another key would be needed. It is very messy and time consuming to try to re-encrypt all data that is encrypted with another key with a main key. What should be the main key at all in this case? The oldest key? The key with the most encrypted objects? What if the key got synchronized but not all objects that got encrypted with this particular key? How should the user know for which particular password the application asks and why it takes probably very long to re-encrypt the data? It’s very hard to describe encryption “issues” to users. So far I didn’t find an acceptable solution, nor some kind of generic strategy. Do you have some hints about a concrete strategy or some books / papers that describe synchronization of symmetrically encrypted data with keys that could cause conflicts?

  Read the article

• Drawing 2D Grid in 3D View - Need help with method

  - by Deukalion

  I'm trying to draw a simple 2D grid for an editor, to able to navigate more clearly around the 3D space, but I can't render it: Grid2D class, creates a grid of a certain size at a location and should just draw lines. public class Grid2D : IShape { private VertexPositionColor[] _vertices; private Vector2 _size; private Vector3 _location; private int _faces; public Grid2D(Vector2 size, Vector3 location, Color color) { float x = 0, y = 0; if (size.X < 1f) { size.X = 1f; } if (size.Y < 1f) { size.Y = 1f; } _size = size; _location = location; List<VertexPositionColor> vertices = new List<VertexPositionColor>(); _faces = 0; for (y = -size.Y; y <= size.Y; y++) { vertices.Add(new VertexPositionColor(location + new Vector3(-size.X, y, 0), color)); vertices.Add(new VertexPositionColor(location + new Vector3(size.X, y, 0), color)); _faces++; } for (x = -size.X; x <= size.X; x++) { vertices.Add(new VertexPositionColor(location + new Vector3(x, -size.Y, 0), color)); vertices.Add(new VertexPositionColor(location + new Vector3(x, size.Y, 0), color)); _faces++; } _vertices = vertices.ToArray(); } public void Render(GraphicsDevice device) { device.DrawUserPrimitives<VertexPositionColor>(PrimitiveType.LineList, _vertices, 0, _faces); } } Like this: +----+----+----+----+ | | | | | +----+----+----+----+ | | | | | +----+----+----+----+ | | | | | +----+----+----+----+ | | | | | +----+----+----+----+ Anyone knows what I'm doing wrong? If I add a Shape without texture, it's set automatically to VertexColorEnabled and TextureEnabled = false. This is how I render it: foreach (RenderObject render in _renderObjects) { render.Effect.Projection = projection; render.Effect.View = view; render.Effect.World = world; foreach (EffectPass pass in render.Effect.CurrentTechnique.Passes) { pass.Apply(); try { // Could be a Grid2D render.Shape.Render(_device); } catch { throw; } } } Exception is thrown: The current vertex shader declaration does not include all the elements required by the current Vertex Shader. Normal0 is missing. Simply put, I can't figure out how to draw a few lines. I want to draw them one at a time and I guess that's the problem I haven't figured out, and even when I tried rendering vertices[i], vertices[i+1] and primitiveCount = 1, vertices = 2, and so on it didn't work either. Any suggestions?

  Read the article

• Notes - Part II - Play with JavaFX

  - by Silviu Turuga

  Open the project from last lesson Double click on NotesUI.fmxl, this will open the JavaFX Scene Builder On the left side you have a area called Hierarchy, from there press Del or Shift+Backspace on Mac to delete the Button and the Label. You'll receive a warning, that some components have been assigned an fx:id, click Delete as we don't need them anymore. Resize the AnchorPane to have enough room for our design, eg. 820x550px From the top left pick the Container called Accordion and drag over the AnchorPane design Chose then from Controls a List View and drag inside the Accordion. You'll notice that by default the Accordion has 2 TitledPane, and you can switch between them by clicking on their name. I'll let you the pleasure to do the rest in order to get the following result  Here is the list of objects used Save it and then return to NetBeans Run the application and it should be run without any issue. If you click on buttons they all are functional, but nothing happens as we didn't link them with any action. We'll see this in the next episode. Now, let's play a little bit with the application and try to resize it… Have you notice the behavior? If the form is too small, some objects aren't visible, if it is too large there is too much space . That's for sure something that your users won't like and you as a programmer have to care about this. From NetBeans double click NotesUI.fmxl so to return back to JavaFX Scene Builder Select the TextField from bottom left of Notes, the one where I put the text Category and then from the right part of JavaFX Scene Builder you'll notice a panel called Inspector. Chose Layout and then click on the dotted lines from left and bottom of the square, like you see in the below image This will make the textfield to have always the same distance from left and bottom no matter the size of the form. Save and run the application. Note that whenever the form is changing the Height, the Category TextField has the same distance from the bottom. Select Accordion and do the same steps but also check the top dotted line, because we want the Accordion to have the same height as the main form has. I'll let you the pleasure to do the same for the rest of components. It's very important to design an application that can be resize by user and in the same time, all the buttons are on place. Last step is to make sure our application is not getting smaller then a certain size, as this will hide parts of our layout. So select the AnchorPane and from Inspector go to Layout and note down the Width and Height. Go back to NetBeans and open the file Main.java and add the following code just after stage.setScene(scene); (around line 26) stage.setMinWidth(820); stage.setMinHeight(550); Use your own width and height. This will prevent user to reduce the width or height of your application to a value that will hide parts of your layout. So now you should have done most of the design part and next time we'll see how can we enter some data into our newly created application… Note: in case you miss something, here are the source files of the project till this point. 

  Read the article

• Event Driven Behavior Tree: deterministic traversal order with parallel

  - by Heisenbug

  I've studied several articles and listen some talks about behavior trees (mostly the resources available on AIGameDev by Alex J. Champandard). I'm particularly interested on event driven behavior trees, but I have still some doubts on how to implement them correctly using a scheduler. Just a quick recap: Standard Behavior Tree Each execution tick the tree is traversed from the root in depth-first order The execution order is implicitly expressed by the tree structure. So in the case of behaviors parented to a parallel node, even if both children are executed during the same traversing, the first leaf is always evaluated first. Event Driven BT During the first traversal the nodes (tasks) are enqueued using a scheduler which is responsible for updating only running ones every update The first traversal implicitly produce a depth-first ordered queue in the scheduler Non leaf nodes stays suspended mostly of the time. When a leaf node terminate(either with success or fail status) the parent (observer) is waked up allowing the tree traversing to continue and new tasks will be enqueued in the scheduler Without parallel nodes in the tree there will be up to 1 task running in the scheduler Without parallel nodes, the tasks in the queue(excluding dynamic priority implementation) will be always ordered in a depth-first order (is this right?) Now, from what is my understanding of a possible implementation, there are 2 requirements I think must be respected(I'm not sure though): Now, some requirements I think needs to be guaranteed by a correct implementation are: The result of the traversing should be independent from which implementation strategy is used. The traversing result must be deterministic. I'm struggling trying to guarantee both in the case of parallel nodes. Here's an example: Parallel_1 -->Sequence_1 ---->leaf_A ---->leaf_B -->leaf_C Considering a FIFO policy of the scheduler, before leaf_A node terminates the tasks in the scheduler are: P1(suspended),S1(suspended),leaf_A(running),leaf_C(running) When leaf_A terminate leaf_B will be scheduled (at the end of the queue), so the queue will become: P1(suspended),S1(suspended),leaf_C(running),leaf_B(running) In this case leaf_B will be executed after leaf_C at every update, meanwhile with a non event-driven traversing from the root node, the leaf_B will always be evaluated before leaf_A. So I have a couple of question: do I have understand correctly how event driven BT work? How can I guarantee the depth first order is respected with such an implementation? is this a common issue or am I missing something?

  Read the article

• Unity Dash and top toolbar won't open after updating to 12.10

  - by pgrytdal

  Today, I updated to Ubuntu 12.10. After re-starting, like the updater suggested, the toolbar on the top of the screen, and the dash won't load. I seem to be missing other features, as well, like alttab to switch windows, etc. I am able to access the Terminal, by typing CtrlAltT, which is how I was bale to access Firefox. How do I fix this problem? Edit: 2:10 PM on 10/19/12 As Chris Carter suggested, I'm including the results of the teminal command lspci (Sorry... I dont know how to format between Back-tics): 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge 00:01.0 PCI bridge: Acer Incorporated [ALI] AMD RS780/RS880 PCI to PCI bridge (int gfx) 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) 00:07.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3) 00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] 00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller 00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 3a) 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller 00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor HyperTransport Configuration (rev 40) 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Link Control 01:05.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RS780M/RS780MN [Mobility Radeon HD 3200 Graphics] 01:05.1 Audio device: Advanced Micro Devices [AMD] nee ATI RS780 HDMI Audio [Radeon HD 3000-3300 Series] 03:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe (rev 10) 09:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)

  Read the article

• Opengl-es picking object

  - by lacas

  I saw a lot of picking code opengl-es, but nothing worked. Can someone give me what am I missing? My code is (from tutorials/forums) Vec3 far = Camera.getPosition(); Vec3 near = Shared.opengl().getPickingRay(ev.getX(), ev.getY(), 0); Vec3 direction = far.sub(near); direction.normalize(); Log.e("direction", direction.x+" "+direction.y+" "+direction.z); Ray mouseRay = new Ray(near, direction); for (int n=0; n<ObjectFactory.objects.size(); n++) { if (ObjectFactory.objects.get(n)!=null) { IObject obj = ObjectFactory.objects.get(n); float discriminant, b; float radius=0.1f; b = -mouseRay.getOrigin().dot(mouseRay.getDirection()); discriminant = b * b - mouseRay.getOrigin().dot(mouseRay.getOrigin()) + radius*radius; discriminant = FloatMath.sqrt(discriminant); double x1 = b - discriminant; double x2 = b + discriminant; Log.e("asd", obj.getName() + " "+discriminant+" "+x1+" "+x2); } } my camera vectors: //cam Vec3 position =new Vec3(-obj.getPosX()+x, obj.getPosZ()-0.3f, obj.getPosY()+z); Vec3 direction =new Vec3(-obj.getPosX(), obj.getPosZ(), obj.getPosY()); Vec3 up =new Vec3(0.0f, -1.0f, 0.0f); Camera.set(position, direction, up); and my picking code: public Vec3 getPickingRay(float mouseX, float mouseY, float mouseZ) { int[] viewport = getViewport(); float[] modelview = getModelView(); float[] projection = getProjection(); float winX, winY; float[] position = new float[4]; winX = (float)mouseX; winY = (float)Shared.screen.width - (float)mouseY; GLU.gluUnProject(winX, winY, mouseZ, modelview, 0, projection, 0, viewport, 0, position, 0); return new Vec3(position[0], position[1], position[2]); } My camera moving all the time in 3d space. and my actors/modells moving too. my camera is following one actor/modell and the user can move the camera on a circle on this model. How can I change the above code to working?

  Read the article

• In what oreder does the Asset-Pipeline in Ruby on Rails load JavaScript Files?

  - by psycatham

  Hello, So, when I decided to remove the tags <script></script> and benefit from the asset-pipeline instead, complications took place. I am working with Google Maps' API V3, and to benefit from their functions and objects that their code provides, you have load the link first <script src="https://maps.googleapis.com/maps/api/js?v=3.exp&libraries=places"></script> Basically, If I put this line before their code, and put their code in script tags, things work out pretty perfecty, but when I use javascript_include_tag instead of script tag in html and copy my code to the file I pointed at -Like This - <script src="https://maps.googleapis.com/maps/api/js?v=3.exp&libraries=places"></script> <%=javascript_include_tag "map_new_marker_drag"%> , the asset-pipeline seems to load That file before loading the link of Google Maps API, thus I get the error : - Uncaught ReferenceError : google is undefined I tried putting the link in javascript_include_tag too -Like this- <%=javascript_include_tag "https://maps.googleapis.com/maps/api/js?v=3.exp&libraries=places" %> <%=javascript_include_tag "map_new_marker_drag"%> , and it generated this <script src="https://maps.googleapis.com/maps/api/js?v=3.exp&amp;libraries=places"></script> <script src="https://maps.gstatic.com/cat_js/intl/en_us/mapfiles/api-3/17/2/%7Bmain,places%7D.js" type="text/javascript"></script> <script src="/assets/map_new_marker_drag.js?body=1"></script> and the same error Uncaught ReferenceError : google is undefined. Do I have to put it in another order? what am I missing about the asset-pipeline mechanisms ? What should I do to make the link load before the code so to benefit from their objects and get rid of the error? PS : I tried using jquery functions and so , but I seem not to make it happen. If you still think this is a proper solution, please provide me some code I can use this is the jquery function I used jQuery(function($) { // Asynchronously Load the map API var script = document.createElement('script'); script.src = "http://maps.googleapis.com/maps/api/js?sensor=false&callback=initialize"; document.body.appendChild(script); var scriptTwo = document.createElement('script'); scriptTwo.src = "https://maps.googleapis.com/maps/api/js?v=3.exp&libraries=places"; document.body.appendChild(scripTwo); });

  Read the article

• Do you know about the Visual Studio 2010 Database Projects Guidance?

  - by Martin Hinshelwood

  Early on in the Team System (now Visual Studio ALM) cycle a new product surfaced within Team System that was affectionately called “Data Dude”, but had the more formal name of “Visual Studio 2005 Team Edition for Database Professionals”. The purpose of this product was to try and make the database a “first class citizen” in the development world. Those that started using Visual Studio 2005 Team Edition for Database Professionals (Data Dude) loved it, but everyone else did not get it. The capabilities were a little patchy, but the one thing it did bring to the party was the ability to put your database schema under source control. This was revolutionary as previously your DBA sat as far away from the team as possible, and usually in a dark cupboard, now they could partake of all the goodness of Version Control, Work Item Tracking and automated builds. The problem was that the understanding required to manage these projects was very different to that needed previously. Then the Visual Studio ALM Rangers got a hold of it…and produced some of the best guidance available. Figure: Download the guidance from http://vsdatabaseguide.codeplex.com/ This guidance discusses scenarios and approaches of using the Database Projects in Visual Studio 2010 to help you use the tools more effectively and maximize their value to your organization This guidance is focused on these five areas: Solution and Project Management Source Code Control and Configuration Management Integrating External Changes with the Project System Build and Deployment Automation with Visual Studio Database Projects Database Testing and Deployment Verification Each of these areas has common guidance, usage scenarios, hands on labs, and lessons learned from real world engagements and the community discussions.   The guidance is broken down into three packages: Guidance documentation Hands-on-lab (HOL) documentation note: The documentation is available in XPS-only format packages or complete XPS,PDF,DOCX format packages HOL Package If you need assistance and no one else can help, then you may need to call the Visual Studio ALM Rangers. The Visual Studio ALM Rangers have the mission to provide out of band solutions for missing features or guidance. They are supported by Microsoft Product Group, Microsoft Consulting Services, Microsoft Most Valued Professionals (MVPs) and technical specialists from technology communities around the globe, giving you a real-world view from the field, where the technology has been tested and used. For more information on the Rangers please visit http://msdn.microsoft.com/en-us/vstudio/ee358786.aspx and for more a list of other Rangers projects please see http://msdn.microsoft.com/en-us/vstudio/ee358787.aspx.

  Read the article

• Building SANE from git-source produce backend missmatch on 12.04 even if built locally

  - by deinonychusaur

  It seems to me that with Ubuntu Precise Pangolin it is all but easy to do a proper install of SANE from source (git-repo). I've found other scanning issues trying to find an answer to this, where the output people posted seems to indicate they suffer the same issue (unknowingly). If I run on a fresh install of Ubuntu 12.04 with compiled SANE source from the git I get: $ scanimage -V scanimage (sane-backends) 1.0.24git; backend version 1.0.22 (I basically followed the instructions on http://ubuntuportal.com/2012/02/how-to-get-an-canon-canoscan-lide-100-scanner-to-work-in-ubuntu-11-10linux-mint-12.html since I didn't find any other information making sure that sane was not installed prior to installation.) My primary interest is the epson2-backend. In 1.0.22 it offers the wrong TPU settings for Epson V700 (TPU2-mode wasn't supported in 1.0.22, and the scanner is useless to me if I don't have the TPU2-support). Since if I ask it to enter transparency mode, it shows 1.0.22 behaviour, it implies that the epson2-backend comes from 1.0.22 and not 1.0.24 even though I just built it. If I install SANE with prefix to a local folder and run that version of scanimage it still produces the mismatch. However, on another computer where I installed a custom 1.0.22 build of SANE prior to upgrading to Ubuntu 12.04, I can build and install the same SANE-git locally and have it correctly match backends: $ ./SANE/bin/scanimage -V scanimage (sane-backends) 1.0.24git; backend version 1.0.24 $ scanimage -V scanimage (sane-backends) 1.0.22; backend version 1.0.22 On this computer the 1.0.24 works correctly in finding TPU2 on Epson V700. So what am I missing/doing wrong? (And I want to replace 1.0.22 with 1.0.24 for the whole system, the local build was just debugging.) Any help would be much appreciated. Edit 1: Just tried compiling SANE using this instruction on Ubuntu 10.04 and it worked like a charm. However, when I upgraded to 12.04 (really would like to run 12.04), SANE was downgraded to 1.0.22. When trying the same set of instructions on 12.04 I was still out of luck -- the backend missmatch was there again (and I do have libusb-dev installed) Edit 2: I updated to Ubuntu 12.10 which now has the 1.0.23 SANE drivers. I haven't dared trying to compile from source on 12.10 since 1.0.23 is good enough for me. This is just a work-around and I would still like to know what's up with Ubuntu 12.04.

  Read the article

• Breakout ball collision detection, bouncing against the walls [solved]

  - by Sri Harsha Chilakapati

  I'm currently trying to program a breakout game to distribute it as an example game for my own game engine. http://game-engine-for-java.googlecode.com/ But the problem here is that I can't get the bouncing condition working properly. Here's what I'm using. public void collision(GObject other){ if (other instanceof Bat || other instanceof Block){ bounce(); } else if (other instanceof Stone){ other.destroy(); bounce(); } //Breakout.HIT.play(); } And here's by bounce() method public void bounce(){ boolean left = false; boolean right = false; boolean up = false; boolean down = false; if (dx < 0) { left = true; } else if (dx > 0) { right = true; } if (dy < 0) { up = true; } else if (dy > 0) { down = true; } if (left && up) { dx = -dx; } if (left && down) { dy = -dy; } if (right && up) { dx = -dx; } if (right && down) { dy = -dy; } } The ball bounces the bat and blocks but when the block is on top of the ball, it won't bounce and moves upwards out of the game. What I'm missing? Is there anything to implement? Please help me.. Thanks EDIT: Have changed the bounce method. public void bounce(GObject other){ //System.out.println("y : " + getY() + " other.y + other.height - 2 : " + (other.getY() + other.getHeight() - 2)); if (getX()+getWidth()>other.getX()+2){ setHorizontalDirection(Direction.DIRECTION_RIGHT); } else if (getX()<(other.getX()+other.getWidth()-2)){ setHorizontalDirection(Direction.DIRECTION_LEFT); } if (getY()+getHeight()>other.getY()+2){ setVerticalDirection(Direction.DIRECTION_UP); } else if (getY()<(other.getY()+other.getHeight()-2)){ setVerticalDirection(Direction.DIRECTION_DOWN); } } EDIT: Solved now. See the changed method in my answer.

  Read the article

• Security Access Control With Solaris Virtualization

  - by Thierry Manfe-Oracle

  Numerous Solaris customers consolidate multiple applications or servers on a single platform. The resulting configuration consists of many environments hosted on a single infrastructure and security constraints sometimes exist between these environments. Recently, a customer consolidated many virtual machines belonging to both their Intranet and Extranet on a pair of SPARC Solaris servers interconnected through Infiniband. Virtual Machines were mapped to Solaris Zones and one security constraint was to prevent SSH connections between the Intranet and the Extranet. This case study gives us the opportunity to understand how the Oracle Solaris Network Virtualization Technology —a.k.a. Project Crossbow— can be used to control outbound traffic from Solaris Zones. Solaris Zones from both the Intranet and Extranet use an Infiniband network to access a ZFS Storage Appliance that exports NFS shares. Solaris global zones on both SPARC servers mount iSCSI LU exported by the Storage Appliance.  Non-global zones are installed on these iSCSI LU. With no security hardening, if an Extranet zone gets compromised, the attacker could try to use the Storage Appliance as a gateway to the Intranet zones, or even worse, to the global zones as all the zones are reachable from this node. One solution consists in using Solaris Network Virtualization Technology to stop outbound SSH traffic from the Solaris Zones. The virtualized network stack provides per-network link flows. A flow classifies network traffic on a specific link. As an example, on the network link used by a Solaris Zone to connect to the Infiniband, a flow can be created for TCP traffic on port 22, thereby a flow for the ssh traffic. A bandwidth can be specified for that flow and, if set to zero, the traffic is blocked. Last but not least, flows are created from the global zone, which means that even with root privileges in a Solaris zone an attacker cannot disable or delete a flow. With the flow approach, the outbound traffic of a Solaris zone is controlled from outside the zone. Schema 1 describes the new network setting once the security has been put in place. Here are the instructions to create a Crossbow flow as used in Schema 1 : (GZ)# zoneadm -z zonename halt ...halts the Solaris Zone. (GZ)# flowadm add-flow -l iblink -a transport=TCP,remote_port=22 -p maxbw=0 sshFilter  ...creates a flow on the IB partition "iblink" used by the zone to connect to the Infiniband.  This IB partition can be identified by intersecting the output of the commands 'zonecfg -z zonename info net' and 'dladm show-part'.  The flow is created on port 22, for the TCP traffic with a zero maximum bandwidth.  The name given to the flow is "sshFilter". (GZ)# zoneadm -z zonename boot  ...restarts the Solaris zone now that the flow is in place.Solaris Zones and Solaris Network Virtualization enable SSH access control on Infiniband (and on Ethernet) without the extra cost of a firewall. With this approach, no change is required on the Infiniband switch. All the security enforcements are put in place at the Solaris level, minimizing the impact on the overall infrastructure. The Crossbow flows come in addition to many other security controls available with Oracle Solaris such as IPFilter and Role Based Access Control, and that can be used to tackle security challenges.

  Read the article

• Dadaism and Agility

  - by alexhildyard

  We all have our little bugbears, and something that has given me particular pause over the years is the place of Agility in the software development life cycle. While I have seen it used successfully on both small and Enterprise-level projects, I have also seen many instances in which long-standing technical debt has also originated under its watch. Ironically the problem in such cases seems to me not that the practitioners in question have failed to follow due process (Test, Develop, Refactor -- a common "what" of Agile), but basically that they have missed the point (the "why" of Agile). It's probably a sign of my age that I'm much more interested in the "why" than the "what", since I feel that the latter falls out naturally from the former, but that this is not a reciprocal relationship.Consider Dadaism, precursor to the Surrealist movement in the early part of the twentieth century. Anyone could stand up and proclaim he or she was Dada; anyone could write cut-ups, or pull words out a hat, or produce gibberish on duelling typewriters under the inspiration of Dada. And all that took place at such performances was a manifestation of Dada, and all the artefacts that resulted were also Dada. Hence one commentator's engimatic observation that 'when one speaks of Dada, then one speaks of Dada. But when one does not speak of Dada, one still speaks of Dada.'What is Dada? Literally, Dada is what you say it is. But that's also missing the point. Dada is about erecting a framework within which utterances like this are valid; Dada is about preparing a stage for itself. Dadaism exemplifies the purity of a process-driven ideology -- in fact an ideology that is almost pure process, with nothing extraneous in the way of formal method, and while perhaps Agile delivery should not embrace the liberties of Dadaism too literally, some of the similarities nevertheless are salutary.Agile -- like Dada -- is an attitude; it is about *being* agile; it is not really about doing a specific set of things that are somehow *part* of being Agile. It is an abstract base rather than an implementation, a characteristic rather than a factor. It is the pragmatic response to the need for change in the face of partial information, ephemeral requirements and a healthy dose of systematic uncertainty. In practice this will usually mean repeatedly making the smallest useful changes to a system, recognising that systems evolve, and that all change carries risk. It will usually mean that instead of investing effort in future-proofing a system against a known technology roadmap, one instead invests one's energies in the daily repetition and incremental development of processes best designed to accommodate change quickly. But though it may mean these things in practice, it isn't actually *about* either of these things; it's about the mindset, the attitude that conceives of such responses as sensible solutions given the larger and ultimately unclassifiable thing that constitutes the development lifecycle of a specific project.

  Read the article

• Still prompted for a password after adding SSH public key to a server

  - by Nathan Arthur

  I'm attempting to setup a git repository on my Dreamhost web server by following the "Setup: For the Impatient" instructions here. I'm having difficulty setting up public key access to the server. After successfully creating my public key, I ran the following command: cat ~/.ssh/[MY KEY].pub | ssh [USER]@[MACHINE] "mkdir ~/.ssh; cat >> ~/.ssh/authorized_keys" ...replacing the appropriate placeholders with the correct values. Everything seemed to go through fine. The server asked for my password, and, as far as I can tell, executed the command. There is indeed a ~/.ssh/authorized_keys file on the server. The problem: When I try to SSH into the server, it still asks for my password. My understanding is that it shouldn't be asking for my password anymore. What am I missing? EDIT: SSH -v Log: Macbook:~ michaeleckert$ ssh -v [USER]@[SERVER URL] OpenSSH_6.2p2, OSSLShim 0.9.8r 8 Dec 2011 debug1: Reading configuration data /etc/ssh_config debug1: /etc/ssh_config line 20: Applying options for * debug1: /etc/ssh_config line 53: Applying options for * debug1: Connecting to [SERVER URL] [[SERVER IP]] port 22. debug1: Connection established. debug1: identity file /Users/michaeleckert/.ssh/id_rsa type -1 debug1: identity file /Users/michaeleckert/.ssh/id_rsa-cert type -1 debug1: identity file /Users/michaeleckert/.ssh/id_dsa type -1 debug1: identity file /Users/michaeleckert/.ssh/id_dsa-cert type -1 debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_6.2 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.5p1 Debian-6+squeeze3 debug1: match: OpenSSH_5.5p1 Debian-6+squeeze3 pat OpenSSH_5* debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA [STRING OF NUMBERS AND LETTERS SEPARATED BY SEMI-COLONS] debug1: Host ‘[SERVER URL]' is known and matches the RSA host key. debug1: Found key in /Users/michaeleckert/.ssh/known_hosts:2 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Trying private key: /Users/michaeleckert/.ssh/id_rsa debug1: Trying private key: /Users/michaeleckert/.ssh/id_dsa debug1: Next authentication method: password [USER]@[SERVER URL]'s password: debug1: Authentication succeeded (password). Authenticated to [SERVER URL] ([[SERVER IP]]:22). debug1: channel 0: new [client-session] debug1: Requesting [email protected] debug1: Entering interactive session. debug1: Sending environment. debug1: Sending env LANG = en_US.UTF-8 Welcome to [SERVER URL] Any malicious and/or unauthorized activity is strictly forbidden. All activity may be logged by DreamHost Web Hosting. Last login: Sun Nov 3 12:04:21 2013 from [MY IP] [[SERVER NAME]]$

  Read the article

• Simple rendering produces minor stutter

  - by Ben

  For some reason, this game loop renders the movement of a simple rectangle with no stuttering. double currTime; double prevTime = System.nanoTime() / NANO_TO_SEC; double FPSTIMER = System.nanoTime(); double maxTimeDiff = 100.0 / 1000.0; double delta = 1.0 / 60.0; int processes = 0, frames = 0; while(true){ currTime = System.nanoTime() / NANO_TO_SEC; if(currTime - prevTime > maxTimeDiff) prevTime = currTime; if(currTime >= prevTime){ process(); processes++; prevTime += delta; if(currTime < prevTime){ render(); frames++; } } else{ try{ Thread.sleep((long) (1000 * (prevTime - currTime))); } catch(Exception e){} } if(System.nanoTime() - FPSTIMER > 1000000000.0){ System.out.println("Process: " + (1000 / processes) + "ms FPS: " + (1000 / frames) + "ms"); processes = frames = 0; FPSTIMER += 1000000000.0; } } But for this game loop, I get really minor stuttering where the movement does not look smooth. long prevTime = System.currentTimeMillis(); long prevRenderTime = 0; long currRenderTime = 0; long delta = 0; long msPerTick = 1000 / 60; int frames = 0; int ticks = 0; double FPSTIMER = System.currentTimeMillis(); while (true){ long currTime = System.currentTimeMillis(); delta += (currTime - prevTime) / msPerTick; prevTime = currTime; while (delta >= 1){ ticks++; process(); delta -= 1; } prevRenderTime = System.currentTimeMillis(); render(); frames++; currRenderTime = System.currentTimeMillis(); try{ Thread.sleep((long) ((1000 / FPS) - (currRenderTime - prevRenderTime))); } catch(Exception e){} if(System.currentTimeMillis() - FPSTIMER > 1000.0){ System.out.println("Process: " + (1000.0 / ticks) + "ms FPS: " + (1000.0 / frames) + "ms"); ticks = frames = 0; FPSTIMER += 1000.0; } Is there any critical difference that I'm missing here? The one thing I noticed is that if I uncap the fps for the second game loop, the stuttering goes away. It doesn't make sense to me. Also, the second game loop came from Notch's Minicraft code with just my thread sleeping code added in.

  Read the article

• Memory read/write access efficiency

  - by wolfPack88

  I've heard conflicting information from different sources, and I'm not really sure which one to believe. As such, I'll post what I understand and ask for corrections. Let's say I want to use a 2D matrix. There are three ways that I can do this (at least that I know of). 1: int i; char **matrix; matrix = malloc(50 * sizeof(char *)); for(i = 0; i < 50; i++) matrix[i] = malloc(50); 2: int i; int rowSize = 50; int pointerSize = 50 * sizeof(char *); int dataSize = 50 * 50; char **matrix; matrix = malloc(dataSize + pointerSize); char *pData = matrix + pointerSize - rowSize; for(i = 0; i < 50; i++) { pData += rowSize; matrix[i] = pData; } 3: //instead of accessing matrix[i][j] here, we would access matrix[i * 50 + j] char *matrix = malloc(50 * 50); In terms of memory usage, my understanding is that 3 is the most efficient, 2 is next, and 1 is least efficient, for the reasons below: 3: There is only one pointer and one allocation, and therefore, minimal overhead. 2: Once again, there is only one allocation, but there are now 51 pointers. This means there is 50 * sizeof(char *) more overhead. 1: There are 51 allocations and 51 pointers, causing the most overhead of all options. In terms of performance, once again my understanding is that 3 is the most efficient, 2 is next, and 1 is least efficient. Reasons being: 3: Only one memory access is needed. We will have to do a multiplication and an addition as opposed to two additions (as in the case of a pointer to a pointer), but memory access is slow enough that this doesn't matter. 2: We need two memory accesses; once to get a char *, and then to the appropriate char. Only two additions are performed here (once to get to the correct char * pointer from the original memory location, and once to get to the correct char variable from wherever the char * points to), so multiplication (which is slower than addition) is not required. However, on modern CPUs, multiplication is faster than memory access, so this point is moot. 1: Same issues as 2, but now the memory isn't contiguous. This causes cache misses and extra page table lookups, making it the least efficient of the lot. First and foremost: Is this correct? Second: Is there an option 4 that I am missing that would be even more efficient?

  Read the article

• I'm a C Programmer, but I can't find a comfortable environment to work in

  - by Jesse Brands

  Hello everyone, Last time I asked a question, I was having issues dealing with Java which I had to do for a course work. I generally use C for my development work - especially personal projects - and I've grown up in what is pretty much a Linux/UNIX world. In this world, it was easy to use C, you had your C compiler (GCC is excellent in that regard) and a wealth of tools such as the command line and vi/emacs/whatever-you-got. However, that was all that I really liked about Linux/UNIX. It really fitted well with the C language; nowadays, I'm somewhat forced into Windows/Mac OS X for most of my work. C seems poorly supported on a mac for starters, there's no GUI API to use and pretty much you get forced into Obj-C. This is not a problem, I like Objective-C, but it's another language I have to learn. Now coming to Windows. Why does everything about Windows Development try to scare me away? It's basically come down to: USE C# AND .NET OR DIE. I don't like C#, I like C, they are fundamentally different. Yet when I make a Windows Forms application in MSVC++ (I know that's not C), I get a main function riddled with weird things I've never heard of before, along with a poor, barely-compliant C/C++ compiler. What am I to do when I just want to program in C, make applications that look and feel like native Windows applications (I am a sucker for aesthetics, and I'm not looking to make something cross-platform. I just want it to work on Windows, and look as native as possible.). C++ is a fine alternative, but it really looks like the only way to make a decent, native feeling Windows application, is to use C#. Am I missing something here? I'd rather not use CYGWIN. Like I said, I want people to install the program, and it should just work out of the box on Windows 7. Program in question involves a Media Player, if anyone is curious what I'm targetting at. Anyone who had the same experiences who can help me out? How can I code something in ANSI C and still have a native feel?

  Read the article

• Parallel Port Problem in 12.04

  - by Frank Oberle

  I have a “dumb” printer attached to a parallel port in my machine which works fine under the “other” resident operating system (from Redmond) on the same machine. I recently added Ubuntu 12.04 as a dual boot on the machine, but Ubuntu doesn't seem to recognize the parallel port at all. All I need to set up a printer is a really plain-vanilla fixed pitch text-only generic driver, which is present, but no parallel ports show up. (The other printers, all on USB ports, seem to work just fine). Following what appeared to me to be the most reasonable of the many conflicting pieces of advice on the web, here's what I did: I added the following lines to /etc/modules parport_pc ppdev parport Then, after rebooting, I checked to see that the lines were still present, and they were. I ran dmesg | grep par and got the following references in the output that seemed like they might have to do with the parallel port: [ 14.169511] parport_pc 0000:03:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 14.169516] PCI parallel port detected: 9710:9805, I/O at 0xce00(0xcd00), IRQ 21 [ 14.169577] parport0: PC-style at 0xce00 (0xcd00), irq 21, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] [ 14.354254] lp0: using parport0 (interrupt-driven). [ 14.571358] ppdev: user-space parallel port driver [ 16.588304] type=1400 audit(1347226670.386:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=964 comm="apparmor_parser" [ 16.588756] type=1400 audit(1347226670.386:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=964 comm="apparmor_parser" [ 16.673679] type=1400 audit(1347226670.470:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1010 comm="apparmor_parser" [ 16.675252] type=1400 audit(1347226670.470:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1014 comm="apparmor_parser" [ 16.675716] type=1400 audit(1347226670.470:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1014 comm="apparmor_parser" [ 16.676636] type=1400 audit(1347226670.474:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1015 comm="apparmor_parser" [ 16.677124] type=1400 audit(1347226670.474:11): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1015 comm="apparmor_parser" [ 1545.725328] parport0: ppdev0 forgot to release port I have no idea what any of that means, but the line “parport0: ppdev0 forgot to release port ” seems unusual. I was still unable to add a printer for my old clunker, so I tried the direct approach, typing echo “Hello” > /dev/lp0 and received a Permission denied message. I then tried echo “Hello” > /dev/parport0 which didn't give me any message at all, but still didn't print anything. Running the command sudo /usr/lib/cups/backend/parallel gives the following: direct parallel:/dev/lp0 "unknown" "LPT #1" "" "" Checking the permissions for /dev/parport0, Owner, Group, and Other are all set to read and write. crw-rw---- 1 root lp 6, 0 Sep 9 16:37 /dev/lp0 crw-rw-rw- 1 root lp 99, 0 Sep 9 16:37 /dev/parport0 The output of the command lpinfo -v includes the following line: direct parallel:/dev/lp0 I've read several web postings that seem to suggest this has been a problem for several years, but the bug reports were closed because there wasn't enough information to address the issue (shades of Microsoft!). Any suggestions as to what I might be missing here?

  Read the article

• External hard drive issue

  - by Blind Fish

  I am running Ubuntu 12.04 and I have a 500GB external hard drive, formatted in ext4, which I have used for about a year to store batches of data that I am sifting through. About once a week I move a chunk of data from the external drive to my internal drive for processing. As I do that I delete the data from the external drive and empty the trash, thereby clearing up space on the external and also preventing myself from grabbing stuff that I've already sorted through. The vast majority of this is text files, but there are a few .jpegs and .mp4s thrown in, if that matters. Anyway, this has been working without a hitch for nearly a year. So today I plug in the drive and I have an odd issue. I was able to move folders from the external over to my internal drive with no problem, but when I tried to delete those files I was unable to do so. I kept getting the "unable to send file to trash, do you wish to delete permanently?" message. I clicked yes / delete all, but no files were actually deleted. It just sat there. Even worse, while the system was trying in vain to delete those files I was unable to move more files over. In short, I was stuck. I canceled the operation, unmounted and remounted the drive, and then I had an even bigger problem. I have a spreadsheet of all the different folders on there ( exactly 818 ) and yet when I opened the drive in Nautilus, it was only finding 512 folders. So I had 306 missing folders, but my free space was unchanged. Immediately I think that the drive may be corrupted. I went into Disk Utility and ran the check disk option. It said that the drive was NOT clean, but offered no remedy or option to repair. I went back into the drive in Nautilus and once again attempted to delete the files I had already moved. Same issue. I clicked on Details and it said that it was unable to create a trashing file I/O error. I've looked, and it's not a permissions issue. The drive and all folders that are in it all belong to me, and they are all read / write. I've started running badblocks on the drive, but it looks like that is going to take several hours to complete. Any ideas?

  Read the article

• Workarounds for supporting MVVM in the Silverlight ContextMenu service

  - by cibrax

  As I discussed in my last post, some of the Silverlight controls does not support MVVM quite well out of the box without specific customizations. The Context Menu is another control that requires customizations for enabling data binding on the menu options. There are a few things that you might want to expose as view model for a menu item, such as the Text, the associated icon or the command that needs to be executed. That view model should look like this, public class MenuItemModel { public string Name { get; set; } public ICommand Command { get; set; } public Image Icon { get; set; } public object CommandParameter { get; set; } } This is how you can modify the built-in control to support data binding on the model above, public class CustomContextMenu : ContextMenu { protected override DependencyObject GetContainerForItemOverride() { CustomMenuItem item = new CustomMenuItem(); Binding commandBinding = new Binding("Command"); item.SetBinding(CustomMenuItem.CommandProperty, commandBinding);   Binding commandParameter = new Binding("CommandParameter"); item.SetBinding(CustomMenuItem.CommandParameterProperty, commandParameter);   return item; } }   public class CustomMenuItem : MenuItem { protected override DependencyObject GetContainerForItemOverride() { CustomMenuItem item = new CustomMenuItem();   Binding commandBinding = new Binding("Command"); item.SetBinding(CustomMenuItem.CommandProperty, commandBinding);   return item; } } The change is very similar to the one I made in the TreeView for manually data binding some of the Menu item properties to the model. Once you applied that change in the control, you can define it in your XAML like this. <toolkit:ContextMenuService.ContextMenu> <e:CustomContextMenu ItemsSource="{Binding MenuItems}"> <e:CustomContextMenu.ItemTemplate> <DataTemplate> <StackPanel Orientation="Horizontal" > <ContentPresenter Margin="0 0 4 0" Content="{Binding Icon}" /> <TextBlock Margin="0" Text="{Binding Name, Mode=OneWay}" FontSize="12"/> </StackPanel> </DataTemplate> </e:CustomContextMenu.ItemTemplate> </e:CustomContextMenu> </toolkit:ContextMenuService.ContextMenu> The property MenuItems associated to the “ItemsSource” in the parent model just returns a list of supported options (menu items) in the context menu. this.menuItems = new MenuItemModel[] { new MenuItemModel { Name = "My Command", Command = new RelayCommand(OnCommandClick), Icon = ImageLoader.GetIcon("command.png") } }; The only problem I found so far with this approach is that the context menu service does not support a HierarchicalDataTemplate in case you want to have an hierarchy in the context menu (MenuItem –> Sub menu items), but I guess we can live without that.

  Read the article

• How to run software, that is not offered though package managers, that requires ia32-libs

  - by Onno

  I'm trying to install the Arma 2 OA dedicated server on a Virtualbox VM so I can test my own missions in a sandbox environment in a way that lets me offload them to another computer in my network. (The other computer is running the VM, but it's a windows machine, and I didn't want to hassle with its installation) It needs at least 2, and preferably 4GB of ram, so I thought I would install the AMD64 version of ubuntu 13.10 to get this going. 'How do you run a 32-bit program on a 64-bit version of Ubuntu?' already explained how to install 32bit software though apt-get and/or dpkg, but that doesn't apply in this case. The server is offered as a compressed download on the site of BI Studio, the developer of the Arma games. Its installation instructions are obviously slightly out of date with the current state of the art. (probably because the state of the art has been updated quite recently :) ) It states that I have to install ia32-libs, which has now apparently been deprecated. Now I have to find out how to get the right packages installed to make sure that it will run. My experience level is like novice-intermediate when it comes to these issues. I've installed a lot of packages though apt-get; I've solved dependency issues in the past; I haven't installed much software without using package managers. I can handle myself with basic administrative work like editing conf files and such. I have just gone ahead and tried to install it without installing ia32-libs through apt-get but to install gcc to get the libs after all. My reasoning being that gcc will include the files for backward compatibility coding and on linux all libs are (as far as I can tell) installed at a system level in /libs . So far it seems to start up. (I can connect with the game server trough my in-game network browser, so it's communicating) I'm not sure if there's any dependency checking going on when running the game server program, so I'm left with a couple of questions: Does 13.10 catch any calls to ia32libs libraries and translate the calls to the right code on amd64? If it runs, does that mean that all required libraries have been loaded correctly, or is there a change of it crashing later on when a library that was needed is missing after all? Is it necessary to do a workaround such as installing gcc? How do I find out what libraries I might need to run this software? (or any other piece of 32-bit software that isn't offered through a package manager)

  Read the article

• Creating a voxel world with 3D arrays using threads

  - by Sean M.

  I am making a voxel game (a bit like Minecraft) in C++(11), and I've come across an issue with creating a world efficiently. In my program, I have a World class, which holds a 3D array of Region class pointers. When I initialize the world, I give it a width, height, and depth so it knows how large of a world to create. Each Region is split up into a 32x32x32 area of blocks, so as you may guess, it takes a while to initialize the world once the world gets to be above 8x4x8 Regions. In order to alleviate this issue, I thought that using threads to generate different levels of the world concurrently would make it go faster. Having not used threads much before this, and being still relatively new to C++, I'm not entirely sure how to go about implementing one thread per level (level being a xz plane with a height of 1), when there is a variable number of levels. I tried this: for(int i = 0; i < height; i++) { std::thread th(std::bind(&World::load, this, width, height, depth)); th.join(); } Where load() just loads all Regions at height "height". But that executes the threads one at a time (which makes sense, looking back), and that of course takes as long as generating all Regions in one loop. I then tried: std::thread t1(std::bind(&World::load, this, w, h1, h2 - 1, d)); std::thread t2(std::bind(&World::load, this, w, h2, h3 - 1, d)); std::thread t3(std::bind(&World::load, this, w, h3, h4 - 1, d)); std::thread t4(std::bind(&World::load, this, w, h4, h - 1, d)); t1.join(); t2.join(); t3.join(); t4.join(); This works in that the world loads about 3-3.5 times faster, but this forces the height to be a multiple of 4, and it also gives the same exact VAO object to every single Region, which need individual VAOs in order to render properly. The VAO of each Region is set in the constructor, so I'm assuming that somehow the VAO number is not thread safe or something (again, unfamiliar with threads). So basically, my question is two one-part: How to I implement a variable number of threads that all execute at the same time, and force the main thread to wait for them using join() without stopping the other threads? How do I make the VAO objects thread safe, so when a bunch of Regions are being created at the same time across multiple threads, they don't all get the exact same VAO? Turns out it has to do with GL contexts not working across multiple threads. I moved the VAO/VBO creation back to the main thread. Fixed! Here is the code for block.h/.cpp, region.h/.cpp, and CVBObject.h/.cpp which controls VBOs and VAOs, in case you need it. If you need to see anything else just ask. EDIT: Also, I'd prefer not to have answers that are like "you should have used boost". I'm trying to do this without boost to get used to threads before moving onto other libraries.

  Read the article

< Previous Page | 531 532 533 534 535 536 537 538 539 540 541 542  | Next Page >