Search Results

Search found 19471 results on 779 pages for 'network troubleshooting'.

Page 578/779 | < Previous Page | 574 575 576 577 578 579 580 581 582 583 584 585  | Next Page >

  • Load balancing with Cisco router

    - by you8301083
    I have a Cisco router with two bonded T1's which are setup as a VPN to the main office. We need more bandwidth but can't get other connections (or it's too costly), so I would like to have a dsl connection installed. This DSL connection will run over a VPN to the same main office, but it won't be bonded with the T1's - so it won't act as a single connection. Since the three circuits won't act as a single connection (basically would be two connections 2 T1's + 1 DSL) we would have to split the network in half - but I don't want to do that. Instead, would it be possible to send all HTTP/HTTPS over the DSL connection but send all mission critical data (such as voice/active directory) over the T1's? I basically want to send specific ports over DSL and everything else over the T1's without separating half of the users traffic over the DSL and the rest over the T1's.

    Read the article

  • Detect damage done by virus

    - by user38471
    Hey, this morning after I went to college a virus infected my pc without any user interaction at my end. When I came home my computer was completely frozen and infected with lots of trojans. I have not typed anything important since returning so keys cannot be logged. However I want to know exactly when my computer crashed from the time of infection to see what could potentially be done remotely by a hacker. The virus my pc was diagonosed with was "fakespypro" http://www.microsoft.com/security/portal/Threat/Encyclopedia/Entry.aspx?Name=Win32%2fFakeSpypro on a fully updated windows 7 installation with firewall enabled. My computer was connected to an internal dorm room network, so probably that has had to do something with it. Any further information about how I could backtrace this virus infection or ways to discover what data might be stolen would be greatly appriciated.

    Read the article

  • DB auto failover in c# does not work when the principal server physically goes offline

    - by user62521
    I'm setting up DB auto failover in C# with SQL Server 2008 and I have a 'high safety with automatic failover mirror' using a witness setup and my connection string looks like "Server=tcp:DC01; Failover Partner=tcp:DC02; database=dbname; uid=sewebsite;pwd=somerndpwd;Connect Timeout=10;Pooling=True;" During testing, when I turn off the SQL Server service on the principal server the auto failover works like a charm, but if I take the principal server offline (by shutting down the server or killing the network card) auto failover does not work and my website just times out. I found this article where the second last post suggests that its because we are using named pipes which does not work when the principal goes offline, but we force TCP in our connection string. What am I missing to get this DB auto failover working?

    Read the article

  • Can I ping via an arbitrary interface of a DD-WRT system?

    - by bytebuster
    There's a Linksys WRT54GL router with DD-WRT firmware (v23SP2). The network has a simple dual-WAN configuration (standby mode, switching by a script): ~ # ip route 192.168.3.0/24 dev br0 proto kernel scope link src 192.168.3.1 192.168.2.0/24 dev vlan2 proto kernel scope link src 192.168.2.2 192.168.1.0/24 dev vlan1 proto kernel scope link src 192.168.1.67 127.0.0.0/8 dev lo scope link default via 192.168.2.1 dev vlan2 I'm trying to ping a certain server arbitrary via vlan1 or vlan2. What I tried, as suggested here: ping -I vlan2 <address> ping 192.168.2.1 <address> In both cases ping simply exits with no error messages. Also, ping ignores many other parameters, again, by exiting silently. I failed to find any references that DD-WRT has a limited version of ping whatsoever. I also don't think it can be a permissions issue as mentioned here since the only user with DD-WRT is root. What's wrong?

    Read the article

  • What is the aim of this email? Is this a ping/sping? [closed]

    - by mplungjan
    Hi, I received this spam in my catch-all. As a webmaster of the domain it was sent to, I am really curious what the reason for this mail is. It was sent to a non-existent user "tania" on my domain - here I used mydomain.zzz - what do the sender want to achieve? Since many mail servers have stopped backscattering, not getting a bounce would not mean anything, would it? And if this is off topic, where inb the StackExchange WOULD it be on topic? Delivered-To: [email protected] Received: (qmail 8015 invoked from network); 27 Jan 2011 02:32:47 -0000 Received: from unknown (HELO p3pismtp01-021.prod.phx3.secureserver.net) ([10.6.12.26]) (envelope-sender <[email protected]>) by smtp35.prod.mesa1.secureserver.net (qmail-1.03) with SMTP for <[email protected]>; 27 Jan 2011 02:32:47 -0000 X-IronPort-Anti-Spam-Result: At4FAAlnQE1GVjtCVGdsb2JhbACWXo4gCwEWCA0YJLwyhU8EhRc Received: from mx.dt3ls.com ([70.86.59.66]) by p3pismtp01-021.prod.phx3.secureserver.net with ESMTP; 26 Jan 2011 19:32:47 -0700 Received: from 70.86.59.66 by mx.dt3ls.com (Merak 8.9.1) with ASMTP id JXF39710 for <[email protected]>; Wed, 26 Jan 2011 17:31:10 -0500 Return-Path: [email protected] Status: Message-ID: <20110126173109.4d9d6c3f2b@1c3c> From: "Tech Support" <[email protected]> To: <[email protected]> Subject: Information, as instructed. Date: Wed, 26 Jan 2011 17:31:09 -0500 X-Priority: 3 X-Mailer: General-Mailer v.3 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Quote: I give it to you not that you may remember time, but that you might forget it now and then for a moment and not spend all your breath trying to conquer it. Because no battle is ever won he said. They are not even fought. The field reveals to a man his own folly and despair, and victory is an illusion of philosophers and fools. William Faulkner The Sound and the Fury

    Read the article

  • Browsing not working in Windows 8

    - by Jonathan Perry
    I'm using Windows 8 Professional installed on Windows 7 using the "Save my preferences and apps" installation option. The Windows works great, apps are downloading and I can listen to online radio stations using the TuneIn radio app meaning the internet connection is alive, however, when I open a browser (either Chrome or IE10) and try to browse the internet, I'm getting an "Unable to resolve DNS" error message. Prior to installing the internet browsing worked flawlessly I must say. I'm using ESET NOD32 Antivirus so I suspect that it might interfere with the web connection now, but I'm not so sure. Internet options show that the PC is set to resolve the DNS automatically. I don't know what to do. My other Win7 PCs in my wifi home network are connecting to the internet without any issues. If anyone can help me resolve this I'll be grateful :) Thanks

    Read the article

  • Safari proxy bypass for IPv6

    - by rhi
    I'm a first-time n00b on Mac (but have been doing computers since before PC's). This Mac has 2 VLANs, vlan0 in IPv4, vlan1 in IPv6. Safari can surf via IPv4 squid proxy OK. Safari can surf via IPv6 natively, if I switch off the proxy. How do I set up the Settings - Network - Interface - Advanced - Proxies to "bypass" IPv6? Current Settings include variations along the lines of ... "*.local, 10.0.0.0/8, 192.168.0.0/16, 172.16.0.0/12 , ::, ipv6 " but don't work as expected. I want Safari to go out on its own with IPv6, not crash at the proxy with "malformed URL" Thanks, //rhi

    Read the article

  • Virtual Machine files on ramdisk doesn't run faster than on physical disk

    - by Landy
    I installed total 36G memory (4x8G + 2x2G) in the host (Windows 7) and I used ImDisk to create a 32G ramdisk and format it to NTFS file system. Then I copied the virtual machine (in VMware Workstation format) folder, including vmx, vmdk, etc... to the new created ram disk. Then I tried to power on it in VMware Workstation. What made me surprised is that the performance is not better than before. It cost almost the same time to power on the Windows 7 VM. I check the Resource Monitor in the Windows 7 host, and the statistics of CPU, disk, network are rather normal. The memory has reported 3000+ hard fault/sec when guest OS boot then drop to 0 after the guest powered on. Any idea about this issue? I had thought the performance of ramdisk will be better than physical disk in this case. Am I wrong? Thanks.

    Read the article

  • Risk to native OS from Live CD?

    - by Frost Shadow
    Will booting from a Live CD (I was thinking Anonym OS) have any risk to the native OS? I wanted to try it out on my school´s computer, but I´d rather not have to explain why I accidentally reformatted the HD and deleted everything.. I know once you´ve booted the right way, it shouldn´t leave any trace on the HD, but is it possible I can push some wrong button and end up trying to overwrite the native with the Live OS? Also, since the computer itself is connected to the internet, will the network administrator be able to see that i´ve booted from a Live CD? I´m thinking yes, but just thought I´d check. Thanks for any help!

    Read the article

  • IIS cannot access itself

    - by dave
    We are on a corporate network that uses ISA and I am having issues trying to not have requests go through ISA. I have IIS7 on my local Windows 7 machine that has websites and a service layer. The websites access the service layer using a xxxx.servicelayer.local address that is set up in my HOSTS file to point to 127.0.0.1. I have Windows Firewall client which I have disabled. I have tried both adding this address into IE so that it does not go through ISA and also disabled this section altogether. When the website (which is actually IIS making the request to itself) tries to access the service layer I receive an ISA error that proxy authentication has failed. Considering that everything I can see to configure is set to not go through the proxy, ISA, I cannot see how this is actually going through the proxy and giving this error. Is there something within Windows 7 that forces the proxy setting, some sort of caching or similar?

    Read the article

  • Do support sites like Stack Overflow upset the paid-support open source model?

    - by ajax81
    In order to stay relevant in the marketplace, I'm researching new business models for my software company. The open source model with paid support seems like a good fit for our product, but I have concerns about whether or not a paid support model is viable in an era where top-notch help is readily available for free on sites like those in the Stack Exchange network. Case in point -- I moved my employees to Ubuntu last year because I didn't want to pay for Win 7 licenses and new hardware (plus, the mono platform was highly attractive). My staff had no Linux experience, but were able to achieve relative competency in about 120 days with the help of AskUbuntu, Stack Overflow, and a few "For Dummies" books. We did employ an Ubuntu consultant for 7 days to provide training and support, but beyond that spent $0.00 on any kind of paid expertise. In regards to my due diligence, I ran a 3 month beta of the freemium-paid-support model with one of our smaller customers, and achieved mediocre results. I'd like to think its because our software is so stable and easy to use that the customer didn't need much paid support, but I suspect that they circumvented the terms of our SLA in the same manner that we did with the move to Ubuntu. Does anyone out there has any thoughts, advice, or experience relevant to the move I'm considering? What worked, what didn't, etc?

    Read the article

  • Why The Athene Group Chose Fusion CRM

    - by Tony Berk
    A guest post by Vikas Bhambri, Managing Partner, The Athene Group This year, The Athene Group (www.theathenegroup.com) celebrated our tenth anniversary. The company has accomplished a lot in ten years overcoming a number of hurdles and challenges to have grown organically to a 150+ person global company with offices in the US, UK, and India and customers in the US, Canada, and Europe. Now more than ever with the current global landscape from an economic and competitive standpoint it was vital that we make some changes to remain successful for the next ten years. There were two key initiatives that we discussed internally that would enable us to successfully accomplish this – collaboration and the concept of “insight to action”. With our existing Oracle CRM On Demand platform we had components of this but not the full depth and breadth that we were looking for. When we started to discuss Fusion CRM we immediately saw several next generation tools that would embrace these two objectives. For a consulting and development organization the collaboration required between business development and consulting delivery is as important as the collaboration required during the projects between the project delivery and account management teams. The Activity Streams functionality in Fusion CRM immediately addressed the communication of key discussion topics and exchanges around our clients. Of course when we saw the Oracle Social Network (which is part of our Fusion CRM roadmap) we were blown away. The combination OSN and our CRM is going to make us more effective as we discuss and work cohesively on client engagements – ensuring mutual success for both Athene and our clients. When we looked at “insight to action” we saw that we had a great platform when folks were at their desks, unfortunately a lot of our business development and consulting folks are on the road. The Fusion Mobile Sales and Fusion Outlook Desktop provide information to our teams when they are on the go. So that they can provide real-time information and react to real-time information provided by their peers. We are in the early stages of our transformative experience with Fusion CRM but we believe the platform along with our people and processes are going to help us achieve our goals in the future.

    Read the article

  • Auto log off windows machine after certain number of minutes

    - by Marty Heath
    I have three machines on my network, two are windows xp and one is windows 7. i would like to have all three machines log a user off if they are on for more than 60 minutes. And I would like this to be applied to the machine not on a per user basis, because I do not want this policy to apply to those users on any other machine. I have installed winexit.scr on one of the machines but the problem is that I cannot change the default value of 10 minutes for the screensaver because that is controlled through group policy, and I cannot seem to find where to change that through group policy on a per machine basis NOT on a per user basis. If I have left out any details I apologize please let me know anything that is needed

    Read the article

  • Cannot ssh anymore into FreeBSD 7.2 home server

    - by Gabi
    Somehow sshd stopped running and no amount of start, restart or onestart will make it go again. I normally ssh into it from a dual-boot laptop computer that shows up on the network as gabi-buntu when running Ubuntu Karmic, and as gabi-pc when running Windows XP Pro. Neither my Putty connection nor the Linux terminal can establish a ssh link anymore. Upon rebooting the server, I am greeted with "/etc/rc: WARNING: run_rc_command: cannot run /usr/sbin/sshd". In addition, a message will appear saying things like rpc.statd: failed to contact host gabi-buntu RPC: port mapper failure RPC: timed out Everything else works fine. The FreeBSD 7.2 box runs a print server, a Samba server, and an Apache server for the home wiki, via https. It also serves up NFS shares for Linux clients. Any suggestions? Thank you, Gabi Huiber

    Read the article

  • Which JMX statistics to watch out for in Catalina/Tomcat?

    - by geoaxis
    I have configured OpenNMS to collect all kinds of numeric data coming out of tomcat7 jmx. There are a lot of things. I am interested in monitoring this tomcat instance so that I can avoid down time and lockups. What metrics should I be watching out for? I am already monitoring things like CPU, Memory, Network via SNMP. With this JMX connection the things that I find interesting are Catalina:type=GlobalRequestProcessor,name="ajp-bio-/a.b.c.d-XXXX" RequestsCount so far. Catalina:type=Manager,context=/myApp,host=localhost Active sessions and its maximum so far

    Read the article

  • Help setting up wireless in Ubuntu 13.04

    - by James
    I'm having problems connecting my WIFI in Ubuntu 13.04 . So I was wondering if filling in the data manually ie: the IPv4, IPv6, the SSID and BSSID info etc. I did try this before but maybe I put in the wrong data or maybe not enough. Would that make it work? I just don't know how to find out some of the data you need to put in? I'm new and it's confusing. Does anyone know the solution? Here is lspci: james@james-MM061:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01) 00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 01) 00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01) 00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01) 00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01) 00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01) 00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] (rev 01) 00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01) 03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02) 03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller 03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) 03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a) 03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05) 0b:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) Computer information: Model: Dell MM061 Mobile Intel(R) 945GM Express Chipset Family [Display adapter] (2x)

    Read the article

  • Touchpad right click doesn't work on HP Envy 14 beats

    - by jdrageme01
    I have Ubuntu 12.04 lts 64 bits on my HP envy 14 beats. When I try to click with the right click button it doesn't work. Only works click in the touchpad directly and with usb mouse. 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) 00:01.1 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0105] (rev 09) 00:01.2 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0109] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05) 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) 00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b5) 00:1c.7 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 [8086:1c1e] (rev b5) 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) 00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 05) 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 05) 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05) 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Whistler [AMD Radeon HD 6600M Series] [1002:6741] 09:00.0 Network controller [0280]: Intel Corporation Centrino Ultimate-N 6300 [8086:4238] (rev 3e) 0a:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet [1969:1083] (rev c0) 0b:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04)

    Read the article

  • Create access point (uap0) on debian 7(arm) - not found?

    - by ethrbunny
    I'm working with a fanless PC that has an ARM chipset, 2 eth plugs and a wifi card (among other things). If I install debian 6 on it all three network interfaces are available at boot time. Today I tried to install debian 7 and had numerous errors indicating that the wireless card isn't supported. uap0: error fetching interface information: Device not found SIOCSIFADDR: No such device uap0: ERROR while getting interface flags: No such device uap0: ERROR while getting interface flags: No such device No such device ERR:UAPHOSTCMD is not supported by uap0 ERR:Command sending failed! No such device ERR:UAPHOSTCMD is not supported by uap0 ERR:Command sending failed! I've tried comparing the kernel module list to the working system but there are too many other differences to make something obvious enough (to me) stand out. How would I get started debugging this problem?

    Read the article

  • Windows 7 can't copy file - Error 0x800700DF: The file size exceeds the limit allowed and cannot be saved

    - by JJGroover
    Any attempt to copy files larger than about 40 MB from a network share (a SAN running open filer / Samba) to my local machine running Windows 7 always results in the following error and the copy fails: Error 0x800700DF: The file size exceeds the limit allowed and cannot be saved. I've tried copying to my C: drive and a USB drive with the same results. Smaller files copy just fine. Clearly 40 MB is not that big of a file so I'm assuming it is some buggy interaction between windows 7 and Samba perhaps. Google has so far turned up nothing. Can anyone point me in the right direction?

    Read the article

  • Accessing SQL with the PC name not the IP

    - by Cornelius
    I'm trying to connect to a SQL instance (default instance) on a machine. When using the IP of the machine it connects to the machine. Using the name of the machine on that machine you are able to establish a connection to the SQL instance but using the machine name on another PC the connection cannot be established. And gives the error A network-related or instance-specific error occurred while establishing a connection to SQL Server. ... (Microsoft Server, Error: 10060) The machine that I am trying to establish the connection from can ping the machine with the SQL instance both on the IP and on the name. Why would this be and how can I fix it? Edit: pinging the name does resolve the correct IP. Pinging the FQDN also works correctly.

    Read the article

  • MSTSC Not working, disconnects shortly after connecting

    - by F4r-20
    I'm currently having a problem connecting remotely to a server. It is a brand new build Windows 2008 R2, remote users are enabled. I'm trying to connect from a Windows 7 machine. Everytime I remotely connect to the server it will stay connected for a matter of seconds (maybe 3-5) and then disconnect and I get the standard old cannot connect and list of reasons it could be. Then I cannot connect again and get this prompt until I restart the server. As soon as it's finished restarting, it happens all over again. The network and hardware configuration between the two machines is completely reliable. Does anybody know what else I could try? Thanks.

    Read the article

  • Need to re-build an application - how?

    - by Tom
    For our main system, we have a small monitor application that sits outside our network and periodically tries to log in to verify the system still works. We have a problem with the monitor though in that the communications component set (Asta 3 inside Delphi applications) doesn't always connect through. Overall, I'd say it's about 95% reliable, but that other 5% kills the monitor since it will try to log in and hang on the connection attempt (no timeout in the component). This really isn't an issue on the client side of the system since the clients don't disconnect and reconnect repeatedly on the same application instance, but I need a way to make sure the monitor stays up and continues working even when the component fails on a run. I have a few ideas as to which way to have the program run, the main idea being to put the communications inside a threaded data module so that if one thread crashes then another thread can test later and the program keep going. Does this sound like a valid way to go? Any other ideas how to ensure a reliable monitoring application with a less than 100% reliable component? Thanks. P.S. Not sure these tags are the most appropriate. Tried including "system-reliability" as one, but not high enough rep to create.

    Read the article

  • iPhone always assigned wrong ip

    - by Ashley Ray
    for some reason most of the time my iPhone connects to the home network the ip address seems wrongly assigned as it 'loses connection' even even with strong reception. If I change the ip address to a static from 168.2.10 to 168.2.15 works fine until it appears to renew back to the prior. I am using a power-plug extender from the modem to router. Then have a laptop Printer playstation tv and another iPhone that always connect fine. The modem also has a crappy wireless which I haven't connected any devices to. I'm sure the forum will have a simple answer!

    Read the article

  • Oracle Identity Management 11gR2 Live Event - New York

    - by Tanu Sood
      Are you in New York or the vicinity on September 6? If so, come join Amit Jasuja, Senior Vice President, Security and Identity Management at Oracle as he discusses the evolution of Oracle identity Management solutions and the business drivers (and industry trends) behind those. You have heard about some of the new experiences delivered with the latest release of Oracle Identity Management - simplified user experience, enhanced security and seamless enablement for secure cloud and mobile environments. Now come see it in action and hear what customers, your peers, are saying about their implementations. This forum will also be a great opportunity for you to connect directly with technology experts and network with industry professionals. There is still time left to register so book your space today. Registration details as well as the agenda for the day can be found here. We look forward to hosting you on Thursday, September 6th. Oracle Identity Management 11gR2 Live Event – New York Thursday, September 6, 2012 Oracle NYC Office 101 Park Avenue 4th Floor New York, NY 10178 Register Here Not in NY on Sep 6? Find an event near you in North America.

    Read the article

  • Setting a Static IP Running FreeBSD8 in VirtualBox hosted on Windows 7

    - by gvkv
    I'm using VirtualBox on Windows 7 (host) to run a FreeBSD (guest) based web server. I`ve assigned a static ip of 192.168.80. 1 to the (virtualized) NIC which is run in bridged mode. The problem is that when I ping an external server (such as google.com) I get a No route to host error: dimetro# ping google.com PING google.com (66.249.90.104): 56 data bytes ping: sendto: No route to host ... I can ping the BSD server from both another virtualized machine and my host machine and from the server, I can ping everything on the network. The router ip is 192.168.1.1/16. ADDENDUM: I have the following lines in /etc/rc.conf on the BSD VM to configure networking: defaultrouter="192.168.1.1" ifconfig_em0="inet 192.168.80.1 netmask 255.255.0.0"

    Read the article

< Previous Page | 574 575 576 577 578 579 580 581 582 583 584 585  | Next Page >