Search Results

Search found 37450 results on 1498 pages for 'text editing'.

Page 581/1498 | < Previous Page | 577 578 579 580 581 582 583 584 585 586 587 588  | Next Page >

• Why does plymouth start so late?

  - by Marky

  It appears that starting with 11.04 Plymouth starts so late in the boot process. Sometimes I only have a split second to see it before it transitions to the login screen. This is the same for 11.10. Compared to 10.04 and 10.10, Plymouth starts only a couple seconds or so after Grub and is very visible within the entire boot process. Is there something that can be done to have Plymouth run earlier? I have experienced this on 3 different machines and on 2 of these machines, I've been running Ubuntu since 10.04. So it's not just my notebook's hardware that is causing this. *One a side note, the boot process is one of the ugliest parts of modern Linux. Ubuntu is not excluded. After almost a decade, (I forget but was bootsplash the first?) this still has only been partly solved. For a couple of seconds ugly text is still seen when shutting down. On several ocassions, the same ugly text is seen when logging out of a session. It's never as smooth as you want it to be. Splash themes are great, don't get me wrong. It's just the transitions that are way off and you get glimpses of what's underneath. I'm used to this but for those new to Ubuntu and coming from Windows. It is a turn off.* pardon the rant. :)

  Read the article

• How to Upgrade Windows 7 Easily (And Understand Whether You Should)

  - by The Geek

  Just the other day I was trying to use Remote Desktop to connect from my laptop in the living room to the desktop downstairs, when I realized that I couldn’t do it because the desktop was running Windows Home Premium—that’s when I realized we’d never covered how to upgrade Windows, so here you are. You can upgrade from any version of Windows to the next version up, but it’s obviously going to cost a bit of money, and there’s a very good chance that you’ll have no reason to upgrade. Keep reading for the differences between the versions, whether you should bother upgrading, and how to actually do it Latest Features How-To Geek ETC HTG Projects: How to Create Your Own Custom Papercraft Toy How to Combine Rescue Disks to Create the Ultimate Windows Repair Disk What is Camera Raw, and Why Would a Professional Prefer it to JPG? The How-To Geek Guide to Audio Editing: The Basics How To Boot 10 Different Live CDs From 1 USB Flash Drive The 20 Best How-To Geek Linux Articles of 2010 Take Better Panoramic Photos with Any Camera Make Creating App Tabs Easier in Firefox Peach and Zelda Discuss the Benefits and Perks of Being Kidnapped [Video] The Life of Gadgets in Price and Popularity [Infographic] Apture Highlights Turns Your Cursor into a Search Tool Add Classic Sci-Fi Goodness to Your Desktop with the Matrix Theme for Windows 7

  Read the article

• Does IE have more strict Javascript parsing than Chrome?

  - by Clay Shannon

  This is not meant to start a religio-technical browser war - I still prefer Chrome, at least for now, but: Because of a perhaps Chrome-related problem with my web page (see https://code.google.com/p/chromium/issues/detail?can=2&start=0&num=100&q=&colspec=ID%20Pri%20M%20Iteration%20ReleaseBlock%20Cr%20Status%20Owner%20Summary%20OS%20Modified&groupby=&sort=&id=161473), I temporarily switched to IE (10) to see if it would also view the time value as invalid. However, I didn't even get to that point - IE stopped me in my tracks before I could get there; but I found that IE was right - it is more particular/precise in validating my code. For example, I got this from IE: SCRIPT5007: The value of the property '$' is null or undefined, not a Function object ...which was referring to this: <script src="/CommonLogin/Scripts/jquery-1.9.1.min.js" type="text/javascript"></script> <script type="text/javascript"> // body sometimes becomes white???? with jquery 1.6.1 $("body").css("background-color", "#405DA7"); < This line is highlighted as the culprit: $("body").css("background-color", "#405DA7"); jQuery is referenced right above it - so why did it consider "$" to be undefined, especially when Chrome had no problem with it...ah! I looked at that location (/CommonLogin/Scripts/) and saw that, sure enough, the version of jQuery there was actually jquery-1.6.2.min.js. I added the updated jQuery file (1.9.1) and it got past this. So now the question is: why does Chrome ignore this? Does it download the referenced version from its own CDN if it can't find it in the place you specify? IE did flag other errs after that, too; so I'm thinking perhaps IE is better at catching lurking problems than, at least, Chrome is. Haven't tested Firefox diesbzg yet.

  Read the article

• Storing editable site content?

  - by hmp

  We have a Django-based website for which we wanted to make some of the content (text, and business logic such as pricing plans) easily editable in-house, and so we decided to store it outside the codebase. Usually the reason is one of the following: It's something that non-technical people want to edit. One example is copywriting for a website - the programmers prepare a template with text that defaults to "Lorem ipsum...", and the real content is inserted later to the database. It's something that we want to be able to change quickly, without the need to deploy new code (which we currently do twice a week). An example would be features currently available to the customers at different tiers of pricing. Instead of hardcoding these, we read them from database. The described solution is flexible but there are some reasons why I don't like it. Because the content has to be read from the database, there is a performance overhead. We mitigate that by using a caching scheme, but this also adds some complexity to the system. Developers who run the code locally see the system in a significantly different state compared to how it runs on production. Automated tests also exercise the system in a different state. Situations like testing new features on a staging server also get trickier - if the staging server doesn't have a recent copy of the database, it can be unexpectedly different from production. We could mitigate that by committing the new state to the repository occasionally (e.g. by adding data migrations), but it seems like a wrong approach. Is it? Any ideas how best to solve these problems? Is there a better approach for handling the content that I'm overlooking?

  Read the article

• Telerik Extensions for ASP.NET MVC Q1 2010 is out!

  Today we shipped the Q1 2010 release out of the door. Go download the open source or if you are a licensed customer download it from your client.net account.   What is new on the MVC front is: No longer in BETA New components TreeView, NumericTextBox components, Calendar, DatePicker New features Grid grouping, Grid editing, Grid localization Using jQuery 1.4.2 Lots of bug fixes   The rest is mentioned in the release notes.   Breaking changes from Q1 2010 Futures!!! There is one breaking change since the Q1 2010 Futures release. The Toolbar method of the GridBuilder has been renamed to ToolBar: <%= Html.Telerik().Grid(Model) //.Toolbar(commands => commands.Insert()) <- Old .ToolBar(commands => commands.Insert()) // <- New%> For a complete list of changed API of the grid check the changes and backward compatibility help topic.   By the way if you still havent cast your vote for a new product or feature do it now! We will soon start development for Q2 2010.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Telerik Extensions for ASP.NET MVC Q1 2010 is out!

  Today we shipped the Q1 2010 release out of the door. Go download the open source or if you are a licensed customer download it from your client.net account.   What is new on the MVC front is: No longer in BETA New components TreeView, NumericTextBox components, Calendar, DatePicker New features Grid grouping, Grid editing, Grid localization Using jQuery 1.4.2 Lots of bug fixes   The rest is mentioned in the release notes.   Breaking changes from Q1 2010 Futures!!! There is one breaking change since the Q1 2010 Futures release. The Toolbar method of the GridBuilder has been renamed to ToolBar: <%= Html.Telerik().Grid(Model) //.Toolbar(commands => commands.Insert()) <- Old .ToolBar(commands => commands.Insert()) // <- New%> For a complete list of changed API of the grid check the changes and backward compatibility help topic.   By the way if you still havent cast your vote for a new product or feature do it now! We will soon start development for Q2 2010.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Event handler generation in Visual Studio 2012

  - by Jalpesh P. Vadgama

  This post will be a part of Visual Studio 2012 feature series There are lots of new features there in visual studio 2012. Event handler generation is one of them. In earlier version of visual studio there was no way to create event handler from source view directly.  Now visual studio 2012 have event handler generation functionality. So if you are editing an event view in source view intellisense will display add new event handler template and once you click on it. It will create a new event handler in the cs file. It will also put a eventhandler name against event name so you don’t need to write that. So, let’s take a simple example of button click event so once I write onclick attribute their smart intellisense will pop up . Now once you click on <Create New Event> It will create event handler in .cs file like following. It will also put submitButton_Click on onClick attribute. Hope you liked it. Stay tuned for more. Till then happy programming..

  Read the article

• TraceTune: Improved Comment View

  - by Bill Graziano

  I wanted an easier way to identify queries I’d already looked at so I could skip them.  I’ve been entering comments for each query as I review it.  These comments typically fall into three categories: a change I made, no easy fix available or something needs to be changed on the client.  TraceTune now highlights any statement with a comment in bold.  If you hover over the statement you’ll see the most recent comment for that statement. This gives me a quick way to see what’s new and identify those queries that still need work.  This is especially helpful when I come back to a server after weeks or months away.  These comments help jar my memory and remind me what I’ve worked on. I made the font slightly smaller in some of the tables.  It’s still readable but I’m able to get more of a SQL statement on the screen.  I also got to re-experience the pain of Internet Explorer, Chrome and FireFox all displaying text (and pop-up text) slightly different. Seeing the comments on a trace has been a big help to me.  I often do a round of tuning and then don’t come back to a server until months later.  Having the comments available helps me get back up to speed quickly.

  Read the article

• HTML Tidy in NetBeans IDE

  - by Geertjan

  First step in integrating HTML Tidy (via its JTidy implementation) into NetBeans IDE: The reason why I started doing this is because I want to integrate this into the pluggable analyzer functionality of NetBeans IDE that I recently blogged about, i.e., where the FindBugs functionality is found. So a logical first step is to get it working in an Action class, after which I can port it into the analyzer infrastructure: import java.awt.event.ActionEvent; import java.awt.event.ActionListener; import java.io.IOException; import java.io.PrintWriter; import java.io.StringWriter; import org.openide.awt.ActionID; import org.openide.awt.ActionReference; import org.openide.awt.ActionReferences; import org.openide.awt.ActionRegistration; import org.openide.cookies.EditorCookie; import org.openide.cookies.LineCookie; import org.openide.loaders.DataObject; import org.openide.text.Line; import org.openide.text.Line.ShowOpenType; import org.openide.util.Exceptions; import org.openide.util.NbBundle.Messages; import org.openide.windows.IOProvider; import org.openide.windows.InputOutput; import org.openide.windows.OutputEvent; import org.openide.windows.OutputListener; import org.openide.windows.OutputWriter; import org.w3c.tidy.Tidy; @ActionID(     category = "Tools", id = "org.jtidy.TidyAction") @ActionRegistration(     displayName = "#CTL_TidyAction") @ActionReferences({     @ActionReference(path = "Loaders/text/html/Actions", position = 150),     @ActionReference(path = "Editors/text/html/Popup", position = 750) }) @Messages("CTL_TidyAction=Run HTML Tidy") public final class TidyAction implements ActionListener {     private final DataObject context;     private final OutputWriter writer;     private EditorCookie ec = null;     public TidyAction(DataObject context) {         this.context = context;         ec = context.getLookup().lookup(org.openide.cookies.EditorCookie.class);         InputOutput io = IOProvider.getDefault().getIO("HTML Tidy", false);         io.select();         writer = io.getOut();     }     @Override     public void actionPerformed(ActionEvent ev) {         Tidy tidy = new Tidy();         try {             writer.reset();             StringWriter stringWriter = new StringWriter();             PrintWriter errorWriter = new PrintWriter(stringWriter);             tidy.setErrout(errorWriter);             tidy.parse(context.getPrimaryFile().getInputStream(), System.out);             String[] split = stringWriter.toString().split("\n");             for (final String string : split) {                 final int end = string.indexOf(" c");                 if (string.startsWith("line")) {                     writer.println(string, new OutputListener() {                         @Override                         public void outputLineAction(OutputEvent oe) {                             LineCookie lc = context.getLookup().lookup(LineCookie.class);                             int lineNumber = Integer.parseInt(string.substring(0, end).replace("line ", ""));                             Line line = lc.getLineSet().getOriginal(lineNumber - 1);                             line.show(ShowOpenType.OPEN, Line.ShowVisibilityType.FOCUS);                         }                         @Override                         public void outputLineSelected(OutputEvent oe) {}                         @Override                         public void outputLineCleared(OutputEvent oe) {}                     });                 }             }         } catch (IOException ex) {             Exceptions.printStackTrace(ex);         }     } } The string parsing above is ugly but gets the job done for now. A problem integrating this into the pluggable analyzer functionality is the limitation of its scope. The analyzer lets you select one or more projects, or individual files, but not a folder. So it doesn't work on folders in the Favorites window, for example, which is where I'd like to apply HTML Tidy, across multiple folders via the analyzer functionality. That's a bit of a bummer that I'm hoping to get around somehow.

  Read the article

• Connection String Incorrectly Formatted [migrated]

  - by Randy E

  I'm running into some issues. Every time I launch into debug mode and hit the "Create User" button, I'm getting an exception being thrown that is due to the Connection String either being in the wrong syntax or just wrong. Using Visual Studio 2010, project is .NET 3.5 with SQL 2008 Express. This is just a personal project that I'm testing some other things with, I know this generally isn't the recommended format but for a personal small project, I don't see the point in doing it any other way. The things I'm testing actually work :) Data Source=.\SQLEXPRESS;AttachDbFilename=|Data Directory|ASPAppDatabase.mdf;Integrated Security=True;User Instance=True That doesn't work. Data Source=.\SQLEXPRESS;AttachDbFilename="|Data Directory|ASPAppDatabase.mdf";Integrated Security=True;User Instance=True Neither does that. Data Source=.\SQLEXPRESS;AttachDbFilename='|Data Directory|ASPAppDatabase.mdf';Integrated Security=True;User Instance=True And again, neither does that :/ However, rather than using "|Data directory| if I use the full path to the local DB file it works just fine and no exception is thrown, and I can read and write as I need. And just to cover all my bases, here is the button click event that creates the User. protected void btnAddUser_Click(object sender, EventArgs e) { Membership.CreateUser(txtUserName.Text, txtPassword.Text); btnLogin_Click(sender, e); } So, what am I missing in regards to the |Data Directory|? Here is an example of the above not working correctly..taken directly from web.config. <add name="ASPAppDatabaseConnection" connectionString='Data Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|ASPAppDatabase.mdf;Integrated Security=True;User Instance=True'/>

  Read the article

• Grub problem - Command prompt

  - by RhZ

  Update: Thanks to all who helped. I gave up and am going to re-install. Not the end of the world, no files will be lost :-) This time will be backing up grub haha. Thanks again, I really appreciate the community's help on this. I was going along fine when the new pae kernel came down, and it had some bug where the sound was all messed up. So I used startup manager to choose the older pae kernel and rebooted. But startupmanager must have fuXXored my grub. When I re-booted, I get thrown directly into memtest and thats it. I tried to re-install grub using the live disc method that I found in many places. That changed something so I get a prompt and the message: "GNU grub version 1.99 ubuntu. Minimal BASH-like editing is supported. Type help for complete list." But then I tried the live CD fix again and now am back at the memtest... What can I do to get my system running again? UPDATE: Just to be clear,when I start up I get a blinking cursor in the top left, and the word 'ON' in the middle of the screen. Then, after a good minute or two, the memtest starts.

  Read the article

• Trouble Installing Codecs libx264 AND libmp3lame

  - by user10762

  I am trying to use OpenShot for movie making. My ideal situation is to encode for the web HD, 30 Frames Per Second, to YouTube. This works out great as OpenShot has a setting for this. The problem is when i go to use it I get: "The following formats/codecs are missing from your system: libx264 libmp3lame You will not be able to use the selected export profile. You will need to install the missing formats/codecs or choose a different export profile." I have tried using Synaptic Package Manager and I think I am installing the right "plugins/codecs" yet to no avail or success. I used the instructions found here to remedy: https://answers.launchpad.net/openshot/+faq/1040 I know this impacts OTHER video editing software (in other words it is not specific just to OpenShot). They give the same type of error message when i try to use their presets as well. So in a word "Help!"... Any info is much appreciated!!! PS - If you know of a BETTER way to do this (another software) that is appreciated too! :-D

  Read the article

• How to get "Fn" keys to work (Asus 4830T)? (specificly, the "suspend" key)

  - by Pointy

  I've got an Asus 4830T onto which I've just re-installed 12.04 because I installed an SSD. I was running 12.04 before too, which had been upgraded over a few releases. At some point on that old install, I had gotten all the "Fn" keys to work, or at least all the ones I cared about. (Oh except I think the screen brightness keys never worked.) I have no recollection of what I did. Anyway now things are fine, and some of the Fn keys work: the one to turn of the trackpad and the one to turn off wireless (grr I hate that one). However, the "suspend" key for some reason does not work. Now the system will suspend and resume just fine, but I'm having to do it from the menu. Is there an easy (or hard) way to make those work? I'm running straight Ubuntu but with Xfce installed as my normal desktop. (In other words, it's not Xubuntu, though I doubt it matters.) I recall at some point having found some arcane mapping mechanism to bind the Fn keys to actions, but I can't find it now. (I'm perfectly OK with editing weird files; I'm a long-time Unix user.) (Very long-time.)

  Read the article

• Creating Engaging Online Experiences is Easy and Intuitive for Marketers with Oracle WebCenter Sites 11g

  - by Christie Flanagan

  Last month, we announced the availability of Oracle WebCenter Sites 11g, the latest release of our web experience management solution. This new release is really geared toward enabling marketers and business users to drive customer acquisition and brand loyalty by simplifying the whole process of creating, managing and optimizing engaging online experiences.  To show you just how this works, we’ve created the video below which takes you through the tasks a typical marketer might execute using Oracle WebCenter Sites to manage their online presence -- everything from page editing to page creation, right on through to optimizing the mobile experience and moderating user-generated comments and reviews is covered here. I hope this video has give you a flavor for just how easy and intuitive it is for marketers and other business users to manage engaging and interactive online experiences using Oracle WebCenter Sites.  To see more about the new release, please check out the recording of our launch webcast. On Demand Webcast - Introducing Oracle WebCenter Sites: Transforming the Online Experience Enabling marketers and business users is a key requirement for creating and managing contextually relevant, social, and interactive online experiences. Oracle WebCenter Sites transforms the online experience into one that is simple and intuitive to manage as a content contributor, encourages interaction between site visitors and their social networks, and provides marketers with automated targeting options for optimizing online engagement. View this webcast now to learn more.

  Read the article

• Jquery calculator

  - by Nemanja

  I want to make calculator for summation. I have this jquery code: <script type="text/javascript"> $(document).ready(function() { $("#calculate").click(function() { if ($("#input").val() != '' && $("#input").val() != undefined) { $("#result").html("Result is: " + parseInt($("#input").val()) * 30 ); } else { $("#result").html("Please enter some value"); } }); }); </script> <div id="calculator"> <br /> <input type="text" style="left:20px;" id="input" /> <div id="result"></div> <input type="button" id="calculate" value="calculate" style="left:20px;" /> </div> I want something like this: I write number 5, then input + from keyboard and write another value. Then to click on summation button and to get value. Can anyone help me with this? Thank you very much!

  Read the article

• SIMPLEST way to set up password protection for a static site, with basic admin UI?

  - by Joseph Turian

  I have a static site. I would like the simplest approach to password protecting a directory, with a basic admin UI for adding/removing users. I will have so few users that I don't care about performance. I don't care if it's PHP or Django or whatever, I just want a complete software package. Apache basic auth isn't good, because you can't log out. Nor is there a UI for adding users. I tried throwing everything behind Django auth and serving the files through Django. However, Chrome treats all my text/css headers as text/plain, so I don't get any stylesheets showing. I can't use mod_xsendfile on my server because I can't reconfigure Apache to add new modules. I think this approach is overkill anyway. I can try configuring Nginx's X-Accel-Redirect, however that requires implementing all the Django code for auth myself, and I'd prefer an existing solution. However, this is my backup plan. Is there a code package that implements authentication with basic admin for a static site?

  Read the article

• About C# objects and the possibilties it has

  - by user527825

  As a novice programmer and I always wonder about c# capabilities. I know it is still early to judge that but all i want to know is can c# do complex stuffs or something outside windows OS. I think C# is a proprietary language (I don't know if I said that right) meaning you can't do it outside Visual Studio or Windows. Also you can't create your own controller (called object right?) like you are forced to use these available in toolbox and their properties and methods. Can C# be used with OpenGL API or DirectX API Finally it always bothers me when I think I start doing things in Visual Studio, I know it sounds arrogant to say but sometimes I feel that I don't like to be forced to use something even if its helpful, like I feel (do I have the right to feel?) that I want to do all things by myself? Don't laugh I just feel that this will give me a better understanding. Is Visual C# like using MaxScript inside 3ds max in that C# is exclusive to do Windows and Forms and Components that are Windows related and maxscript is only for 3d editing and manipulation for various things in the software. If it is too difficult for a beginner I hope you don't answer the fourth question as I don't have enough motivation and I want to keep the little I have. Note: Sorry for my English, I am self taught and never used the language with native speakers so expect so errors. I have a lot of questions regarding many things, what is the daily ratio you think for asking (number of questions) that would not bother the admins of the site and the members here. Thank you for your time.

  Read the article

• Can I use nofollow for offsite links without it affecting my page rank?

  - by Jack

  What I have is a page with almost all offsite links. Each clicked link is forwarded on to the destination. What I would like the search engines to do is to index the text between the anchor tag and not follow the link itself. <a href="somelink">Index This Text Only</a> I've read several articles and they all seem to contradict themselves as to when to use nofollow. What's been happening over the past 2 months that the site has been live is that both Google and Bing are crawling the site as well as all the links on the site that it has been forwarded to. The search engines are now generating a lot of 404s for images and files that never existed on my site but rather seems to correlate to the site it was forwarded to. The search engines don't seem to honor the 302 header when forwarded. I would like to get a definitive answer on the nofollow tag as it relates to my situation. Can I use nofollow to stop the 404s and if so, will it affect my page ranking negatively?

  Read the article

• How can one-handed work in Ubuntu be eased?

  - by N.N.

  My right hand is temporarily immobilized and I would like to do some minor general work on my computer. Mostly web browsing, mailing and file and directory browsing and editing. For this I currently use Firefox, Thunderbird, Nautilus and the GNOME terminal (I have already asked a specific question about Emacs). Are there ways to ease such, or any other general, one-handed work in Ubuntu? I have found http://stackoverflow.com/questions/2391805/how-can-i-remain-productive-with-one-hand-completely-immobilized but that is not exactly what I am asking for. I want to ease whatever little time spent one-handed in Ubuntu and this is also interesting for situations where there is no injury involved, such as when one hand is occupied. I do realize I should avoid unnecessary strain. The main thing that is much slower one-handed is writing. Since I am only temporarily immobilized it seems to make no sense learn a new keyboard layout. I would be surprised if I managed to learn and become more effective with a new keyboard layout (than one-handed QWERTY) before I can use my other hand again. What I have already found: Sticky keys for making it easier to enter keyboard commands. When writing one-handed there are more cases of where it is useful to paste in phrases rather than to reenter them. It is easier to use Super+S rather than CtrlAlt+arrow keys to switch work space.

  Read the article

• Design practice for securing data inside Azure SQL

  - by Sid

  Update: I'm looking for a specific design practice as we try to build-our-own database encryption. Azure SQL doesn't support many of the encryption features found in SQL Server (Table and Column encryption). We need to store some sensitive information that needs to be encrypted and we've rolled our own using AesCryptoServiceProvider to encrypt/decrypt data to/from the database. This solves the immediate issue (no cleartext in db) but poses other problems like Key rotation (we have to roll our own code for this, walking through the db converting old cipher text into new cipher text) metadata mapping of which tables and which columns are encrypted. This is simple when it's just couple of columns (send an email to all devs/document) but that quickly gets out of hand ... So, what is the best practice for doing application level encryption into a database that doesn't support encryption? In particular, what is a good design to solve the above two bullet points? If you had specific schema additions would love it if you could give details ("Have a NVARCHAR(max) column to store the cipher metadata as JSON" or a SQL script/commands). If someone would like to recommend a library, I'd be happy to stay away from "DIY" too. Before going too deep - I assume there isn't any way I can add encryption support to Azure by creating a stored procedure, right?

  Read the article

• Fosfor EPUB Reader

  - by Geertjan

  Instead of creating a fullblown NetBeans Platform application for doing WYSIWYG editing for EPUB, similar to Sigil, I decided to focus purely on the very narrow scope of EPUB reading. The scope is narrower and, since the application will be a lot less ambitious and smaller, a pure JavaFX implementation makes sense. When you somehow get, e.g., buy, an EPUB file, you typically read it on a tablet or mobile device. However, some people in the world, e.g., me, still have laptops. Therefore, I'm creating a small JavaFX application that unzips EPUB files, into a temp directory, and then loads them into a JavaFX WebView. Arabic support: For an application like this, simplicity is the most important thing. Very few buttons, very few options, preferably no configuration of anything. Just let the user open the EPUB file and read it, that's it, nothing fancy. CSS stylesheets and images are correctly read. It's exactly what it looks like, a reader for EPUB files. The back and forward buttons are working and you can also switch to the table of contents. When it is complete, which it pretty much is right now, publishers of EPUB files can make this small app available from their site, to simplify life for their readers, since it will run easily and well on all operating systems.

  Read the article

• JAVA Gui on Hello World [closed]

  - by user58892

  I am designing, implementing, testing, and debuging a GUI-based version of a “Hello, World!” program in a JFrame that includes a JLabel that reads “Hello, World!” and I am trying to use a layout manager, and an Exit button to close the program. Here's what I have so far, I would really apreciate if you could help on it syntax. I am 90% done but tried hard and it couldn't run. import java.awt.*; // Needed for flow layout manager import javax.swing.*; //All swing components live in the javax.swing package import javax.swing.JButton; //to recognize buttons import javax.swing.JFrame; import javax.swing.JPanel; import javax.swing.JTextField; public class HelloWorld { public static void main(String[] args) { //creates the label. The JLabel constructor //takes an optional argument which set the text of the label /* The text will be aligned with the center of the frame * otherwise it will align on the left. */ JLabel label= new JLabel("Hello World!"); new FlowWindow(); label.setHorizontalAlignment (SwingConstants.CENTER); JFrame frame = new JFrame("Hello"); //create exit button JButton button1 = new JButton("Exit"); //Add exit button to the content pane. add(button1); frame.add(label); frame.setSize(300, 300); frame.setVisible(true); frame.setLocationRelativeTo(null); frame.toFront(); } public static void FlowWindow() { //Add a new FlowLayout()); frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); } }

  Read the article

• Calling a webservice via Javascript

  - by jeroenb

  If you want to consume a webservice, it's not allways necessary to do a postback. It's even not that hard! 1. Webservice You have to add the scriptservice attribute to the webservice. [System.Web.Script.Services.ScriptService]public class PersonsInCompany : System.Web.Services.WebService { Create a WebMethod [WebMethod] public Person GetPersonByFirstName(string name) { List<Person> personSelect = persons.Where(p => p.FirstName.ToLower().StartsWith(name.ToLower())).ToList(); if (personSelect.Count > 0) return personSelect.First(); else return null; } 2. webpage Add reference to your service to your scriptmanager <script type="text/javascript"> function GetPersonInCompany() { var val = document.getElementById("MainContent_TextBoxPersonName"); PersonsInCompany.GetPersonByFirstName(val.value, FinishCallback); } function FinishCallback(result) { document.getElementById("MainContent_LabelFirstName").innerHTML = result.FirstName; document.getElementById("MainContent_LabelName").innerHTML = result.Name; document.getElementById("MainContent_LabelAge").innerHTML = result.Age; document.getElementById("MainContent_LabelCompany").innerHTML = result.Company; } </script> Add some javascript, where you first call your webservice. Classname.Webmethod = PersonsInCompany.GetPersonByFirstName Add a callback to catch the result from the webservice. And use the result to update your page. <script type="text/javascript"> function GetPersonInCompany() { var val = document.getElementById("MainContent_TextBoxPersonName"); PersonsInCompany.GetPersonByFirstName(val.value, FinishCallback); } function FinishCallback(result) { document.getElementById("MainContent_LabelFirstName").innerHTML = result.FirstName; document.getElementById("MainContent_LabelName").innerHTML = result.Name; document.getElementById("MainContent_LabelAge").innerHTML = result.Age; document.getElementById("MainContent_LabelCompany").innerHTML = result.Company; } </script>   If you have any question, feel free to contact me! You can download the code here.

  Read the article

• How to Edit PDFs?

  - by snowguy

  I typically have two needs: Scenario A. Change a single PDF page. In this case I have a PDF but not the original source file used to create the PDF. I don't want to try to recreate the document from scratch. I'd like to open the PDF and change a few things. A good example of this scenario: I was responsible for planning a big event at a campground site, I had a PDF of the site. I wanted to start with that document, highlight some parts, add some labels, remove some parts that weren't relevant. or Scenario B. Combine PDFs or extract information from a PDF This scenario usually arises because I want a single PDF deliverable that is made up of parts that are best created in different programs. In this case I have the source files for all the documents but they don't play well enough together to easily create a single PDF deliverable. For part of it, I may want to use Libre Office Writer. For another page I may want to use Gimp. Still another page I may use Libre Office Calc. I could use Writer as the master document and embed images or the Calc object into that, but for ultimate control, you can't beat separate PDF documents that are then combined. What are the best tools / processes for editing PDFs in Ubuntu?

  Read the article

• Allow non-sudo group to control Upstart job

  - by Angle O'Saxon

  I'm trying to set up an Upstart job to run on system startup, and that can also be started/stopped by members of a group other than sudo. With a previous version, I usedupdate-rc.d and scripts stored in /etc/init.d/ to get this working by adding %Group ALL = NOPASSWD: /etc/init.d/scriptname to my sudoers file, but I can't seem to get an equivalent working for Upstart. I tried adding %Group ALL = NOPASSWD: /sbin/initctl start jobname to the sudoers file, but trying to run the command start jobname produces this error: start: Rejected send message, 1 matched rules; type="method_call", sender=":1.21" (uid=1000 pid=5148 comm="start jobname " interface="com.ubuntu.Upstart0_6.Job" member="Start" error name="(unset)" requested_reply="0" destination="com.ubuntu.Upstart" (uid=0 pid=1 comm="/sbin/init") As near as I can tell, that's a complaint about how my user account isn't given the power to send 'Start' messages in the D-Bus config file for Upstart. I haven't been able to actually find any information on how to edit that file to give a group permission to access a specific service--does such an option exist? Is there a way to edit the Sudoers file so I can run the job without editing the config file? Am I better off just sticking with the previous version?

  Read the article

< Previous Page | 577 578 579 580 581 582 583 584 585 586 587 588  | Next Page >