Search Results

Search found 16899 results on 676 pages for 'local'.

Page 619/676 | < Previous Page | 615 616 617 618 619 620 621 622 623 624 625 626  | Next Page >

  • Is this distributed database server idea feasible?

    - by David
    I often use SQLite for creating simple programs in companies. The database is placed on a file server. This works fine as long as there are not more than about 50 users working towards the database concurrently (though depending on whether it is reads or writes). Once there are more than this, they will notice a slowdown if there are a lot of concurrent writing on the server as lots of time is spent on locks, and there is nothing like a cache as there is no database server. The advantage of not needing a database server is that the time to set up something like a company Wiki or similar can be reduced from several months to just days. It often takes several months because some IT-department needs to order the server and it needs to conform with the company policies and security rules and it needs to be placed on the outsourced server hosting facility, which screws up and places it in the wrong localtion etc. etc. Therefore, I thought of an idea to create a distributed database server. The process would be as follows: A user on a company computer edits something on a Wiki page (which uses this database as its backend), to do this he reads a file on the local harddisk stating the ip-address of the last desktop computer to be a database server. He then tries to contact this computer directly via TCP/IP. If it does not answer, then he will read a file on the file server stating the ip-address of the last desktop computer to be a database server. If this server does not answer either, his own desktop computer will become the database server and register its ip-address in the same file. The SQL update statement can then be executed, and other desktop computers can connect to his directly. The point with this architecture is that, the higher load, the better it will function, as each desktop computer will always know the ip-address of the database server. Also, using this setup, I believe that a database placed on a fileserver could serve hundreds of desktop computers instead of the current 50 or so. I also do not believe that the load on the single desktop computer, which has become database server will ever be noticable, as there will be no hard disk operations on this desktop, only on the file server. Is this idea feasible? Does it already exist? What kind of database could support such an architecture?

    Read the article

  • hyperv machine guest loads slow

    - by Dani Avni
    this is by far one of the strangest things I have seen. I have a win 2008R2 cluster with a CSV. the CSV itself is on an iSCSI storage (hitachi HUS 110) basic config of the two hosts in the cluster is Dell R610 Win 2008 R2 with all patches 64GB 1 NIC for host access 2 NICs for guest access 2 NICs for iSCSI these machine work great and I can load a 2008R2 test guest machine on them in less than 90 seconds after the above config is running for over a year, I now need to add a new host. now the host is Dell R620 (Still intel but different CPU) Win 2008 R2 with all patches 64GB 1 NIC for host access 2 NICs for guest access 2 NICs for iSCSI I added this new host to the domain and to the cluster, I gave it access to the CSV and I tried loading the same guest machine that loads in 90 seconds in the other hosts. the machine loads in about 6 minutes. no matter how many times I try this the old hosts load the machine in about 90 seconds and this new host in around 6 minutes to eliminate any problems with the iSCSI connection, I added a new LUN and directly accessed it from the new host and I was working at around 300MB/s so no problem there. I also tested the connection between the other hosts and the new one and network is working fine there too. to eliminate problems in HyperV, I copied the machine to the local disk of the new host and it loaded in less than 20 seconds. now is the point were things get a lot stranger: in my tests I tried installing a fresh windows guest machine to the CSV from the new host. I noticed that while the fresh windows was installing, my test guest was loading in less than 90 seconds even on the new host (I repeated this a few times). If I paused the fresh install guest and tried loading the test guest again it loaded in 6 minutes. and again after I resumed the guest installation the test guest loaded fast. after the fresh windows was also loaded, I ran tests loading the fresh window and my test machine. each one of them loaded in about 5 minutes when I tried loading them separately. however when I started both of them in the same time they both loaded in around 2.5 minutes it seems that the iSCSI disk access is only working if it is under some load (although I never got to above 10% utilization according to the task manager) does anyone have any idea what could be the problem?

    Read the article

  • Add user in CentOS 5

    - by Ron
    I created a new user in my CentOS web server with useradd. Added a password with passwd. But I can't log in with the user via SSH. I keep getting 'access denied'. I checked to make sure that the password was assigned and that the account is active. /var/log/secure shows the following error: Aug 13 03:41:40 server1 su: pam_unix(su:auth): authentication failure; logname= uid=500 euid=0 tty=pts/0 ruser=rwade rhost= user=root Please help, Thanks Thanks for the responses so far: I should add that it is a VPS on a remote computer, fresh out of the box. I can log in as the root user quite fine. I can also su to the new user, but I cannot log in as the new user. Here is my sshd_config file: # $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. # This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin # The strategy used for options in the default sshd_config shipped with # OpenSSH is to specify options with their default value where # possible, but leave them commented. Uncommented options change a # default value. #Port 22 #Protocol 2,1 Protocol 2 #AddressFamily any #ListenAddress 0.0.0.0 #ListenAddress :: # HostKey for protocol version 1 #HostKey /etc/ssh/ssh_host_key # HostKeys for protocol version 2 #HostKey /etc/ssh/ssh_host_rsa_key #HostKey /etc/ssh/ssh_host_dsa_key # Lifetime and size of ephemeral version 1 server key #KeyRegenerationInterval 1h #ServerKeyBits 768 # Logging # obsoletes QuietMode and FascistLogging #SyslogFacility AUTH SyslogFacility AUTHPRIV #LogLevel INFO # Authentication: #LoginGraceTime 2m #PermitRootLogin yes #StrictModes yes #MaxAuthTries 6 #RSAAuthentication yes #PubkeyAuthentication yes #AuthorizedKeysFile .ssh/authorized_keys # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts #RhostsRSAAuthentication no # similar for protocol version 2 #HostbasedAuthentication no # Change to yes if you don't trust ~/.ssh/known_hosts for # RhostsRSAAuthentication and HostbasedAuthentication #IgnoreUserKnownHosts no # Don't read the user's ~/.rhosts and ~/.shosts files #IgnoreRhosts yes # To disable tunneled clear text passwords, change to no here! #PasswordAuthentication yes #PermitEmptyPasswords no PasswordAuthentication yes # Change to no to disable s/key passwords #ChallengeResponseAuthentication yes ChallengeResponseAuthentication no # Kerberos options #KerberosAuthentication no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes #KerberosGetAFSToken no # GSSAPI options #GSSAPIAuthentication no GSSAPIAuthentication yes #GSSAPICleanupCredentials yes GSSAPICleanupCredentials yes # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication mechanism. # Depending on your PAM configuration, this may bypass the setting of # PasswordAuthentication, PermitEmptyPasswords, and # "PermitRootLogin without-password". If you just want the PAM account and # session checks to run without PAM authentication, then enable this but set # ChallengeResponseAuthentication=no #UsePAM no UsePAM yes # Accept locale-related environment variables AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT AcceptEnv LC_IDENTIFICATION LC_ALL #AllowTcpForwarding yes #GatewayPorts no #X11Forwarding no X11Forwarding yes #X11DisplayOffset 10 #X11UseLocalhost yes #PrintMotd yes #PrintLastLog yes #TCPKeepAlive yes #UseLogin no #UsePrivilegeSeparation yes #PermitUserEnvironment no #Compression delayed #ClientAliveInterval 0 #ClientAliveCountMax 3 #ShowPatchLevel no #UseDNS yes #PidFile /var/run/sshd.pid #MaxStartups 10 #PermitTunnel no #ChrootDirectory none # no default banner path #Banner /some/path # override default of no subsystems Subsystem sftp /usr/libexec/openssh/sftp-server

    Read the article

  • How to generate build no with SVN revision no & Maven buildNumber plugin

    - by Binit jha
    I am using mvn buildNumber plugin to generate build no with latest svn revision no. But, our version is not resolve to ${buildNumber} in the duration of installing in .m2 local reposotry. here is the our pom details: <modelVersion>4.0.0</modelVersion> <groupId>com.hp.cloudprint</groupId> <artifactId>testutils</artifactId> <name>testutils</name> <version>6.3.rel.${buildNumber}</version> <description>This jar contains some helper classes which can simplify the writing of JUnit test cases.</description> <dependencies> <plugin> <groupId>org.codehaus.mojo</groupId> <artifactId>buildnumber-maven-plugin</artifactId> <executions> <execution> <id>useLastCommittedRevision</id> <phase>validate</phase> <goals> <goal>create</goal> </goals> </execution> </executions> <configuration> <doCheck>false</doCheck> <doUpdate>true</doUpdate> <getRevisionOnlyOnce>true</getRevisionOnlyOnce> </configuration> </plugin> <scm> <connection>scm:svn:https://acn-platform</connection> <developerConnection>scm:svn:https://abc-platform/trunk</developerConnection> </scm>. </project> Building jar: C:\Documents and Settings\hpadmin\workspace\testutils\target\testutils-6.3.rel.2930.jar [INFO] [install:install] [INFO] Installing C:\Documents and Settings\hpadmin\workspace\testutils\target\testutils-6.3.rel.2930.jar to C:\Documents and Settings\jhab.m2*\repository\com\hp\cloudprint\testutils\6.3.rel.${buildNumber}\testutils-6.3.rel.${buildNumber}.jar** [INFO] ------------------------------------------------------------------------ [INFO] BUILD SUCCESSFUL Target generated correct jar. testutil-6.3.rel.2297.jar* Thanks in advance Binit

    Read the article

  • CNAME to another domain fails on some office networks, why?

    - by crashalpha
    Our domain "aspenfasteners.com" is hosted by Volusion. We have CNAME records "find" and "search" which point to site indexing accounts on www.picosearch.com. These addresses fail on SOME private office networks which have their own DNS. We suspect the problem comes from Volusion's own name servers, n2.volusion.com and n3.volusion.com. Volusion support on problems this technical is non-existant. We have tried an NSLOOKUP on find.aspenfasteners.com with level 2 debugging info, and we got the results below. Is it possible that the local DNS is recursing to Volusion's name servers, and that while Volusion DOES return the canonical name, they do NOT resolve the address? Can anybody with expertise in this sort of stuff PLEASE look at the NSLOOKUP below and tell me if we are right, because Volusion is giving me absolutely NO support on this topic. I need proof of where the problem lies. Thanks VERY much! Carlo find.aspenfasteners.com Server: mtl-srm-dbsv-01.fastenerwholesale.com Address: 192.168.0.44 SendRequest(), len 61 HEADER: opcode = QUERY, id = 8, rcode = NOERROR header flags: query, want recursion questions = 1, answers = 0, authority records = 0, additional = 0 QUESTIONS: find.aspenfasteners.com.fastenerwholesale.com, type = A, class = IN ------------ Got answer (138 bytes): HEADER: opcode = QUERY, id = 8, rcode = NXDOMAIN header flags: response, auth. answer, want recursion, recursion avail. questions = 1, answers = 0, authority records = 1, additional = 0 QUESTIONS: find.aspenfasteners.com.fastenerwholesale.com, type = A, class = IN AUTHORITY RECORDS: -> fastenerwholesale.com type = SOA, class = IN, dlen = 46 ttl = 3600 (1 hour) primary name server = mtl-srm-dbsv-01.fastenerwholesale.com responsible mail addr = admin.fastenerwholesale.com serial = 10219 refresh = 900 (15 mins) retry = 600 (10 mins) expire = 86400 (1 day) default TTL = 3600 (1 hour) ------------ SendRequest(), len 41 HEADER: opcode = QUERY, id = 9, rcode = NOERROR header flags: query, want recursion questions = 1, answers = 0, authority records = 0, additional = 0 QUESTIONS: find.aspenfasteners.com, type = A, class = IN ------------ Got answer (141 bytes): HEADER: opcode = QUERY, id = 9, rcode = NXDOMAIN header flags: response, auth. answer questions = 1, answers = 1, authority records = 1, additional = 1 QUESTIONS: find.aspenfasteners.com, type = A, class = IN ANSWERS: -> find.aspenfasteners.com type = CNAME, class = IN, dlen = 17 canonical name = www.picosearch.com ttl = 3600 (1 hour) AUTHORITY RECORDS: -> com type = SOA, class = IN, dlen = 43 ttl = 900 (15 mins) primary name server = ns3.volusion.com responsible mail addr = admin.volusion.com serial = 1 refresh = 900 (15 mins) retry = 600 (10 mins) expire = 86400 (1 day) default TTL = 3600 (1 hour) ADDITIONAL RECORDS: -> ns3.volusion.com type = A, class = IN, dlen = 4 internet address = 65.61.137.154 ttl = 900 (15 mins) * mtl-srm-dbsv-01.fastenerwholesale.com can't find find.aspenfasteners.com: Non-existent domain

    Read the article

  • Weird IIS with Windows Authentication + IE problem

    - by Paulius Maruška
    I have a website running on IIS and using Windows Authentication. All users that are configured to get access to the site are form a AD domain (not local users). In the properties of a Website, I have set to use the AD domain as the realm. Now, when using Firefox, Safari or Chrome - Everything is fine. When the user tries to open the site, he get's the login box. he enters simply "username" and "password" (let's pretend that it's an actual login and password :P) and he get's into the site. When using IE, however, things get nasty. When the user tries to open the site - he get's the login box. User enters the "username" and "password" again, but those get rejected! And when the second time login box pops up - it has the username filled in as "web-server-domain-name\username" which is wrong, because web-server-domain-name is not the domain where all users reside (it's "ad-domain"). I've spent days trying to figure out what's going on... Note, that if I manually enter "ad-domain\username" - I get accepted into the site without problems. So, my guess is that IE sends wrong username if domain is not specified. Anyway, IE is the only browser that triggers this behavior! Is it possible to do a server-side fix? Maybe it's possible to somehow auto-map the users to AD users? If it's not solvable server-side - is there a client-side fix for this? Thank you. PS: I'm more of a programmer than a sys-admin, so configuring servers isn't the strong side of mine... :P UPDATE: @Evan: Yes, "Digest authentication for Windows domain servers" is also enabled. @Eric: IIS version is 6.0. The authentication methods enabled are: Integrated and digest - all other methods are disabled. As for the security log. I looked at it, when doing "username" and "password" login in Chrome/Firefox and when doing "ad-domain\username" and "password" login from IE - the generated log messages are the same (I see no difference, anyway). When entering "username" and "password" I don't see any errors in the security (or any other) log, so can't tell what method it's trying to use. UPDATE 2: As suggested by Eric in the comments - I played around with Fiddler... While playing with it, I noticed, that when "username" and "password" is entered in FF and IE - the "Authorization" header value (encrypted) sent by IE is longer (almost two times) than one sent by FF. I tried to disable Windows Integrated authentication and only leave the Digest enabled - that fixed the problem (meaning, IE used the right realm just like other browsers), but that caused bazillion other problems with my site, because with Digest - user impersonation on the server doesn't work (that causes problems, when connecting to database etc). Any ideas?

    Read the article

  • Out of nowhere, ssh_exchange_identification: Connection closed by remote hot me too

    - by dgerman
    See similar: Out of nowhere, ssh_exchange_identification: Connection closed by remote host Today, 6/19/12 attempting to ssh to the same host as usual ssh replied ssh_exchange_identification: Connection closed by remote host two additional attempts failed ssh -v $RWS OpenSSH_5.6p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /etc/ssh_config debug1: Applying options for * debug1: Connecting to Real-World-Systems.com [174.127.119.33] port 22. debug1: Connection established. debug1: identity file /Users/dgerman/.ssh/id_rsa type 1 debug1: identity file /Users/dgerman/.ssh/id_rsa-cert type -1 debug1: identity file /Users/dgerman/.ssh/id_dsa type -1 debug1: identity file /Users/dgerman/.ssh/id_dsa-cert type -1 ssh_exchange_identification: Connection closed by remote host ping host was successful, ftp host was successful, ssh now successful, ssh -v $RWS OpenSSH_5.6p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /etc/ssh_config debug1: Applying options for * debug1: Connecting to Real-World-Systems.com [174.127.119.33] port 22. debug1: Connection established. debug1: identity file /Users/dgerman/.ssh/id_rsa type 1 debug1: identity file /Users/dgerman/.ssh/id_rsa-cert type -1 debug1: identity file /Users/dgerman/.ssh/id_dsa type -1 debug1: identity file /Users/dgerman/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_4.3 debug1: match: OpenSSH_4.3 pat OpenSSH_4* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.6 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'real-world-systems.com' is known and matches the RSA host key. debug1: Found key in /Users/dgerman/.ssh/known_hosts:5 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,gssapi-with-mic,password debug1: Next authentication method: publickey debug1: Offering RSA public key: /Users/dgerman/.ssh/id_rsa debug1: Authentications that can continue: publickey,gssapi-with-mic,password debug1: Trying private key: /Users/dgerman/.ssh/id_dsa debug1: Next authentication method: password ++++ What gives?? +++++++++++ Mac OS X 10.4.7 , OpenSSH_5.6p1, OpenSSL 0.9.8r 8 Feb 2011, /Users/dgerman/.ssh > ls -la total 24 drwx------ 7 dgerman staff 238 Jun 19 15:46 . drwxr-xr-x 389 dgerman staff 13226 Jun 19 15:46 .. -rw------- 1 dgerman staff 1766 Feb 26 18:25 id_rsa -rw-r--r-- 1 dgerman staff 400 Feb 26 18:25 id_rsa.pub -rw-r--r-- 1 dgerman staff 67 Feb 26 18:27 keyfingerprint -rw-r--r-- 1 dgerman staff 6215 May 1 08:11 known_hosts -rw-r--r-- 1 dgerman staff 220 Feb 26 18:26 randomart

    Read the article

  • Routing all data through an VPN tunnel with ppp

    - by Oliver
    I'm trying to create a VPN tunnel that forwards all data from the local machine to the VPN server. I'm using ppp-2.4.5 for this with the following configuration: pty "pptp <VPNServer> --nolaunchpppd" name <my login name> remotename PPTP usepeerdns require-mppe-128 file /etc/ppp/options.pptp persist maxfail 0 holdoff 5 I have a script in if-up.d with the following content: route del default eth0 route add default dev ppp0 Before starting the VPN tunnel my routing looks like: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 2 0 0 eth0 127.0.0.0 127.0.0.1 255.0.0.0 UG 0 0 0 lo 192.168.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 After starting the tunnel (via pon) it looks like: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 ppp0 12.34.56.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 127.0.0.0 127.0.0.1 255.0.0.0 UG 0 0 0 lo 192.168.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 Now the problem is, that the VPN tunnel seems to be looped into itself. If I run ifconfig after a few seconds without any traffic: eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.0.10 netmask 255.255.0.0 broadcast 192.168.255.255 ether 00:01:2e:2f:ff:35 txqueuelen 1000 (Ethernet) RX packets 39931 bytes 6784614 (6.4 MiB) RX errors 0 dropped 90 overruns 0 frame 0 TX packets 34980 bytes 7633181 (7.2 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 20 memory 0xfbdc0000-fbde0000 ppp0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1496 inet 12.34.56.78 netmask 255.255.255.255 destination 12.34.56.1 ppp txqueuelen 3 (Point-to-Point Protocol) RX packets 7 bytes 94 (94.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 782863 bytes 349257986 (333.0 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 It states that already over 300 MiB have been send, ppp0 is only online since a few seconds and the connection isn't working anyway. Can someone please help me to fix the routing table, so that the traffic from ppp0 is not send again through ppp0 but instead goes to the remote server?

    Read the article

  • Cannot Send Item error in Outlook - permissions to registry?

    - by Tim Alexander
    The issue I am trying to solve is to do with users getting a Cannot Send Item error in Outlook 2007 connecting to Exchange 2007. Basically if there is an image in the email (either one they have pasted in or one from another email in the chain) they get a "Cannot Send Item" error. Initially thought it was a citrix issue but users get it when they RDP to a server as well. Changing the message to Rich Text works 80% of the time but I do not think this is a solution but more of a temporary workaround. After some troubleshooting we found that the error can be fixed by adding the user as a member of the local power users group. of course this is not really a fix. My thoughts were that the ability of a power user to add/remove software may give them more access to the registry which might allow them to get round a restriction that is in place for a normal user. I have tried going through a procmon but the wealth of information is confusing. It initially looked like it may be an Outlook 2007 email security setting but this does not change between power user and normal user (set to 1 in the registry, "Use the security setting from Outlook Security Settings Public Folders"). I am struggling to fine tune my troubleshooting to work out exactly what is blocking it. Has anyone had an experience with an error similar to this? Or are there any tips for trying to track down issues via procmon as I must admit my approach seems somewhat lacking :) EDIT: So I have trawled through the two logs we have from process monitor (one as a power user and one a normal user). annoyingly I can find no obvious difference where something is denied access. There are more access denied events in the normal user log but these are quickly followed by sucessful entries to the same path fractions of a second later. The only thing that does stand out is an access denied to HKCR.html. This does not even appear in the power user version of the log. From what I understand this helps determine the default browser which ties in nicely with the fact that 9 out of 10 times you can send the message as Rich Text. EDIT: Looks like KB2509470 was causing the issue. Not really sure why but when I can work out what it does and why it causes the problem will post here unless anyone beats me to it!

    Read the article

  • Loss of wireless network connectivity when playing video via HDMI cable

    - by Jeff Fohl
    Hi Folks - New to Super User, so I hope this question fits in with the guidelines. Very strange problem I am having, and I am at a loss as to how to continue troubleshooting this one. The basic problem is that when I attempt to watch streamed video on a particular display device (an Optoma HD180 projector), my network connectivity drops like a stone to barely measurable levels. This is my setup: I have a Dell H2C 730x running Windows 7 64bit. This particular computer has two ATI Radeon HD 4800 video cards. I have two Samsung 22" monitors connected to one card, and an Optoma HD180 digital projector connected to the other card via an HDMI cable. My internet connection is normally a reliable 6Mbps. The problem I am having occurs when I stream video (or even just browse the web) on the Optoma Projector. When I do this, my internet connection drops to practically zero (just a few kilobits per second). When I move the browser away from the projector, and over to one of my Samsung monitors, the internet connection comes right back. Note that the Optoma projector is on and enabled as a third monitor all this time. I can move the mouse around on the projector without triggering the problem. I tried pinging my router when I was playing a movie on one of the monitors, and I get a 1 millisecond response. However, when I have the movie playing on the Optoma projecter, pinging the router gives me response times in the hundreds of milliseconds, or times out completely. So, it clearly is something local to my machine - and not some sort of throttling occurring down the line. I would think that it is possibly something to do with the HDMI driver conflicting somehow with my network driver (which is a USB-based wireless connection). This one has me really stumped. Anyone have any ideas? EDIT: I am now leaning towards the possibility that the HDMI cable is somehow interfering with the wireless network, when large amounts of data are being pushed through the cable. Is this possible?

    Read the article

  • Add user in CentOS 5

    - by Ron
    I created a new user in my CentOS web server with useradd. Added a password with passwd. But I can't log in with the user via SSH. I keep getting 'access denied'. I checked to make sure that the password was assigned and that the account is active. /var/log/secure shows the following error: Aug 13 03:41:40 server1 su: pam_unix(su:auth): authentication failure; logname= uid=500 euid=0 tty=pts/0 ruser=rwade rhost= user=root Please help, Thanks Thanks for the responses so far: I should add that it is a VPS on a remote computer, fresh out of the box. I can log in as the root user quite fine. I can also su to the new user, but I cannot log in as the new user. Here is my sshd_config file: # $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. # This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin # The strategy used for options in the default sshd_config shipped with # OpenSSH is to specify options with their default value where # possible, but leave them commented. Uncommented options change a # default value. #Port 22 #Protocol 2,1 Protocol 2 #AddressFamily any #ListenAddress 0.0.0.0 #ListenAddress :: # HostKey for protocol version 1 #HostKey /etc/ssh/ssh_host_key # HostKeys for protocol version 2 #HostKey /etc/ssh/ssh_host_rsa_key #HostKey /etc/ssh/ssh_host_dsa_key # Lifetime and size of ephemeral version 1 server key #KeyRegenerationInterval 1h #ServerKeyBits 768 # Logging # obsoletes QuietMode and FascistLogging #SyslogFacility AUTH SyslogFacility AUTHPRIV #LogLevel INFO # Authentication: #LoginGraceTime 2m #PermitRootLogin yes #StrictModes yes #MaxAuthTries 6 #RSAAuthentication yes #PubkeyAuthentication yes #AuthorizedKeysFile .ssh/authorized_keys # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts #RhostsRSAAuthentication no # similar for protocol version 2 #HostbasedAuthentication no # Change to yes if you don't trust ~/.ssh/known_hosts for # RhostsRSAAuthentication and HostbasedAuthentication #IgnoreUserKnownHosts no # Don't read the user's ~/.rhosts and ~/.shosts files #IgnoreRhosts yes # To disable tunneled clear text passwords, change to no here! #PasswordAuthentication yes #PermitEmptyPasswords no PasswordAuthentication yes # Change to no to disable s/key passwords #ChallengeResponseAuthentication yes ChallengeResponseAuthentication no # Kerberos options #KerberosAuthentication no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes #KerberosGetAFSToken no # GSSAPI options #GSSAPIAuthentication no GSSAPIAuthentication yes #GSSAPICleanupCredentials yes GSSAPICleanupCredentials yes # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication mechanism. # Depending on your PAM configuration, this may bypass the setting of # PasswordAuthentication, PermitEmptyPasswords, and # "PermitRootLogin without-password". If you just want the PAM account and # session checks to run without PAM authentication, then enable this but set # ChallengeResponseAuthentication=no #UsePAM no UsePAM yes # Accept locale-related environment variables AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT AcceptEnv LC_IDENTIFICATION LC_ALL #AllowTcpForwarding yes #GatewayPorts no #X11Forwarding no X11Forwarding yes #X11DisplayOffset 10 #X11UseLocalhost yes #PrintMotd yes #PrintLastLog yes #TCPKeepAlive yes #UseLogin no #UsePrivilegeSeparation yes #PermitUserEnvironment no #Compression delayed #ClientAliveInterval 0 #ClientAliveCountMax 3 #ShowPatchLevel no #UseDNS yes #PidFile /var/run/sshd.pid #MaxStartups 10 #PermitTunnel no #ChrootDirectory none # no default banner path #Banner /some/path # override default of no subsystems Subsystem sftp /usr/libexec/openssh/sftp-server

    Read the article

  • Is Samba Server what I'm looking for, and if so, what do I need? (currently on DD-WRT Micro)

    - by Anthony
    I am really confused as to what Samba actually does and how it works. Here's what I'm hoping it does: I set up a Samba server on my LAN, and everyone will be able to see each other's shared files and swap them. But some of the documentation makes it sound like it will just allow Mac/Linux computers to see Windows computers. Other bits of the documentation make it sound more like a local server, where a Linux machine would install Samba and they would see everyone and be visible to everyone, but that won't change if anybody else can see each other. While still other things I've read make it seem more like a file-server, where everyone sees each other but file transfers are not peer-to-peer but instead need a host disk for files to act as go between. So, assuming I'm even in the right ballpark of what Samba does in terms of my goal of total cross-visibility on the network, I am left with needing to know what I'd need to set up the server and whether it can be done and is worth it... DD-WRT's article on Samba is a bit ambiguous. One second it sounds as if I can run the server on micro as long as it's set up on a usb drive, but then it also sounds like micro can't run it at all, etc. If I can run it from a usb-connected drive, I still need to know if the files are actually stored on that drive. The dd-wrt article mentions: You can run a Samba server on your main computer and run a client on your router (thus gaining writable storage for the router) or you can use Samba to share a drive connected (typically by USB) to the router among all the computers connected to your network. That one part "to share a drive...among all the computers" makes it sound like the only benefit I get from Samba is a share drive that any OS on the network can see, but they still won't see each other. But I'm very hopeful I'm misreading this. If the computers can see each other but still need the disk, how much space is generally a good idea? I'm basing this on the idea that the drive is a temporary store point. Obviously I'd have to get a drive big enough to store everything people wanted to share if the drive is a full-on file server. If I do have this all wrong, is there any software that achieves what I have in mind? Something that connects to the main router to bridge all clients?

    Read the article

  • Suspected network performance issue on VirtualBox Ubuntu guest on Win7 host

    - by Adam
    I set up Ubuntu 12.04 in VirtualBox on the Win7 machine I was allocated on my new project. I am running Java, Eclipse, Tomcat to develop a large data-intensive application and I noticed that this application runs at half the speed of my colleague's identical machine, where he runs it all under Windows. I think I have narrowed down the performance issue to the network, after comparing and equalising all the Java VM settings with my colleague. Is there a ping test I can do or some other network diagnostic test to flag up any problems? To give some background, the network performance is confusing. Running a network speed test to my colleague's machine with iperf shows speeds of 6 Mb/s from my Ubuntu guest, and 90 Mb/s from the win7 host. Large downloads, e.g. the Java SDK, come down at about 1.2 MB/s on both the guest and the host. Pings are sub-1ms on the host, but 1.5ms on the guest. I also did a broadband speed test, and got 10Mb/s download speed on both, but the host has an upload speed of 10Mb/s but the guest only uploads at 3Mb/s. I've been trying to diagnose any MTU problems with ping -M do to identify any kind of packet fragmentation problem but it's progressing very slow because I don't have much experience in this area. From what I read on other people's networking issues with VB and Linux guests on Win7 hosts, I should be able to get the speed on the guest up to the same level as the host. I installed a fresh VM with Ubuntu again to see if I'd foobar'd it somehow, but I'm getting the same readings with iperf on the virgin installation. My setup is: Adapter 1: Intel PRO/1000 MT Desktop (NAT) Adapter 2: ditto (host-only adapter) eth0 Link encap:Ethernet HWaddr 08:00:27:0b:76:bf inet addr:10.0.2.15 Bcast:10.0.2.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:fe0b:76bf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:86236 errors:0 dropped:0 overruns:0 frame:0 TX packets:49369 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:69163946 (69.1 MB) TX bytes:3530535 (3.5 MB) eth2 Link encap:Ethernet HWaddr 08:00:27:a3:26:b8 inet addr:192.168.56.101 Bcast:192.168.56.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:fea3:26b8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:59 errors:0 dropped:0 overruns:0 frame:0 TX packets:57 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:9148 (9.1 KB) TX bytes:7648 (7.6 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:701 errors:0 dropped:0 overruns:0 frame:0 TX packets:701 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:66321 (66.3 KB) TX bytes:66321 (66.3 KB)

    Read the article

  • New Exchange 2010 CAS cannot find domain controllers

    - by NorbyTheGeek
    I am experiencing problems migrating from Exchange 2003 to Exchange 2010. I am on the first step: installing a new 2010 Client Access Server role. The Active Directory domain functional level is 2003. All domain controllers are 2003 R2. The only existing Exchange 2003 server happens to be housed on one of the domain controllers. It is running Exchange 2003 Standard w/ SP2. IPv6 is enabled and working on all domain controllers, servers, and routers, including this new Exchange server. After installing the CAS role on a new 2008 R2 server (Hyper-V VM) I am receiving 2114 Events: Process MSEXCHANGEADTOPOLOGYSERVICE.EXE (PID=1600). Topology discovery failed, error 0x80040a02 (DSC_E_NO_SUITABLE_CDC). Look up the Lightweight Directory Access Protocol (LDAP) error code specified in the event description. To do this, use Microsoft Knowledge Base article 218185, "Microsoft LDAP Error Codes." Use the information in that article to learn more about the cause and resolution to this error. Use the Ping or PathPing command-line tools to test network connectivity to local domain controllers. Prior to each, I receive the following 2080 Event: Process MSEXCHANGEADTOPOLOGYSERVICE.EXE (PID=1600). Exchange Active Directory Provider has discovered the following servers with the following characteristics: (Server name | Roles | Enabled | Reachability | Synchronized | GC capable | PDC | SACL right | Critical Data | Netlogon | OS Version) In-site: b.company.intranet CDG 1 0 0 1 0 0 0 0 0 s.company.intranet CDG 1 0 0 1 0 0 0 0 0 Out-of-site: a.company.intranet CD- 1 0 0 0 0 0 0 0 0 o.company.intranet CD- 1 0 0 0 0 0 0 0 0 g.company.intranet CD- 1 0 0 0 0 0 0 0 0 Connectivity between the new Exchange server and all domain controllers via IPv4 and IPv6 are all working. I have verified that the new Exchange server is a member of the following groups: Exchange Servers Exchange Domain Servers Exchange Install Domain Servers Exchange Trusted Subsystem Heck, I even put the new Exchange server into Domain Admins just to see if it would help. It didn't. I can't find any evidence of Active Directory replication problems, all pre-setup Setup tasks (/PrepareLegacyExchangePermissions, /PrepareSchema, /PrepareAD, /PrepareDomain) completed successfully. The only problem so far that I haven't been able to resolve with my Active Directory is I am unable to get my IPv6 subnets into Sites and Services Where should I proceed from here?

    Read the article

  • PHP Sessions suddenly not working

    - by styrken
    Out of no where my php sessions does not work anymore. The server have been running fine for several months. I'am running Ubuntu 11.10 (GNU/Linux 3.0.0-14-server x86_64) with nginx/1.0.11 and php 5.3.19-1~dotdeb.0 Session info copied from phpinfo() Session Support enabled Registered save handlers files user memcached Registered serializer handlers php php_binary wddx Directive Local Value Master Value session.auto_start Off Off session.bug_compat_42 Off Off session.bug_compat_warn Off Off session.cache_expire 180 180 session.cache_limiter nocache nocache session.cookie_domain no value no value session.cookie_httponly Off Off session.cookie_lifetime 0 0 session.cookie_path / / session.cookie_secure Off Off session.entropy_file no value no value session.entropy_length 0 0 session.gc_divisor 1000 1000 session.gc_maxlifetime 1440 1440 session.gc_probability 0 0 session.hash_bits_per_character 5 5 session.hash_function 0 0 session.name PHPSESSID PHPSESSID session.referer_check no value no value session.save_handler files files session.save_path /tmp /tmp session.serialize_handler php php session.use_cookies On On session.use_only_cookies On On session.use_trans_sid 0 0 I have setup the following php script to test with: error_reporting(E_ALL); ini_set('display_errors', true); error_log($_SERVER['REMOTE_ADDR'] . ' visited test page'); if(session_start()) echo "Session started <br />"; else echo "Session failed <br />"; echo '<a href="?', time(), '">refresh</a>', "\n"; echo '<pre>'; echo 'session id: ', session_id(), "\n"; $sessionfile = ini_get('session.save_path') . '/' . 'sess_'.session_id(); echo 'session file: ', $sessionfile, ' '; if ( file_exists($sessionfile) ) { echo 'size: ', filesize($sessionfile), "\n"; echo '# ', file_get_contents($sessionfile), ' #'; } else { echo ' does not exist'; } echo PHP_EOL; $_SESSION['number'] = (int) @$_SESSION['number'] + 1; var_dump($_SESSION); echo "</pre>\n"; session_write_close(); echo 'done.'; It tells me that the session file exists, but my session id changes on each refresh.. What is going wrong? There is no output to any error logs at all.. :/ Please help!

    Read the article

  • SSH: Port Forwarding, Firewalls, & Plesk

    - by Kian Mayne
    I edited my SSH configuration to accept connections on Port 213, as it was one of the few ports that my work firewall allows through. I then restarted sshd and everything was going well. I tested the ssh server locally, and checked the sshd service was listening on port 213; however, I still cannot get it to work outside of localhost. PuTTY gives a connection refused message, and some of the sites that allow check of ports I tried said the port was closed. To me, this is either firewall or port forwarding. But I've already added inbound and outbound exceptions for it. Is this a problem with my server host, or is there something I've missed? My full SSH config file, as requested: # $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. # This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin # The strategy used for options in the default sshd_config shipped with # OpenSSH is to specify options with their default value where # possible, but leave them commented. Uncommented options change a # default value. Port 22 Port 213 #Protocol 2,1 Protocol 2 #AddressFamily any #ListenAddress 0.0.0.0 #ListenAddress :: # HostKey for protocol version 1 #HostKey /etc/ssh/ssh_host_key # HostKeys for protocol version 2 #HostKey /etc/ssh/ssh_host_rsa_key #HostKey /etc/ssh/ssh_host_dsa_key # Lifetime and size of ephemeral version 1 server key #KeyRegenerationInterval 1h #ServerKeyBits 768 # Logging # obsoletes QuietMode and FascistLogging #SyslogFacility AUTH SyslogFacility AUTHPRIV #LogLevel INFO # Authentication: #LoginGraceTime 2m #PermitRootLogin yes #StrictModes yes #MaxAuthTries 6 #RSAAuthentication yes #PubkeyAuthentication yes #AuthorizedKeysFile .ssh/authorized_keys # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts #RhostsRSAAuthentication no # similar for protocol version 2 #HostbasedAuthentication no # Change to yes if you don't trust ~/.ssh/known_hosts for # RhostsRSAAuthentication and HostbasedAuthentication #IgnoreUserKnownHosts no # Don't read the user's ~/.rhosts and ~/.shosts files #IgnoreRhosts yes # To disable tunneled clear text passwords, change to no here! #PasswordAuthentication yes #PermitEmptyPasswords no PasswordAuthentication yes # Change to no to disable s/key passwords #ChallengeResponseAuthentication yes ChallengeResponseAuthentication no # Kerberos options #KerberosAuthentication no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes #KerberosGetAFSToken no # GSSAPI options #GSSAPIAuthentication no GSSAPIAuthentication yes #GSSAPICleanupCredentials yes GSSAPICleanupCredentials yes # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication mechanism. # Depending on your PAM configuration, this may bypass the setting of # PasswordAuthentication, PermitEmptyPasswords, and # "PermitRootLogin without-password". If you just want the PAM account and # session checks to run without PAM authentication, then enable this but set # ChallengeResponseAuthentication=no #UsePAM no UsePAM yes # Accept locale-related environment variables AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT AcceptEnv LC_IDENTIFICATION LC_ALL #AllowTcpForwarding yes #GatewayPorts no #X11Forwarding no X11Forwarding yes #X11DisplayOffset 10 #X11UseLocalhost yes #PrintMotd yes #PrintLastLog yes #TCPKeepAlive yes #UseLogin no #UsePrivilegeSeparation yes #PermitUserEnvironment no #Compression delayed #ClientAliveInterval 0 #ClientAliveCountMax 3 #ShowPatchLevel no #UseDNS yes #PidFile /var/run/sshd.pid #MaxStartups 10 #PermitTunnel no #ChrootDirectory none # no default banner path #Banner /some/path # override default of no subsystems Subsystem sftp /usr/libexec/openssh/sftp-server

    Read the article

  • Sarg report error

    - by amyassin
    I have a proxy server that runs Ubuntu Server 11.10, Squid 2.7.STABLE9. I installed sarg (version 2.3.1 Sep-18-2010) to generate reports using the ordinary apt-get install, and added a cron job to generate a report of the day every 5 minutes (that will overwrite the 5-minutes-older one): */5 * * * * /root/proxy_report.sh And the content of /root/proxy_report.sh is: #!/bin/bash /usr/bin/sarg -nd `date +"%d/%m/%Y"` > /dev/null 2>&1 And I added another cron job to generate a full report every hour at :32 (not to collide with the 5 minutes job): */32 * * * * /root/proxy_report_full.sh And the content of /root/proxy_report_full.sh is : #!/bin/bash /usr/bin/sarg -n > /dev/null 2>&1 And I added a small script to remove the yesterday full report (the full report that ends in yesterday that won't be overwritten by the new today full report) in /etc/rc.local to run at startup: /usr/bin/rm_yesterday.sh &>> /var/log/rm_yesterday Where /usr/bin/rm_yesterday.sh: #!/bin/bash find /var/www/sarg/ | grep `date -d Apr1 +"%Y%b%d"`-* | grep -v `date +"%Y%b%d"` | xargs rm -rf * Apr1 is the starting date of the proxy... ** I've placed it in /usr/bin to be mounted early at startup... That arrangement went OK for about a month and a half, except for one time I noticed some errors and reports wasn't generated, and fixed that by making an offset (the two minutes in 32 of the second cron job). However, it then started not to generate reports anymore. By manually trying to generate it it gives the following error: root@proxy-server:~# sarg -n SARG: getword_atoll loop detected after 3 bytes. SARG: Line="154 192.168.10.40 TCP_MISS/200 39 CONNECT www.google.com" SARG: Record="154 192.168.10.40 TCP_MISS/200 39 CONNECT www.google.com" SARG: searching for 'x2f' SARG: getword backtrace: SARG: 1:sarg() [0x8050a4a] SARG: 2:sarg() [0x8050c8b] SARG: 3:sarg() [0x804fc2e] SARG: 4:/lib/i386-linux-gnu/libc.so.6(__libc_start_main+0xf3) [0x129113] SARG: 5:sarg() [0x80501c9] SARG: Maybe you have a broken date in your /var/log/squid/access.log file When I looked to /var/log/squid/ folder, I noticed that it contains some rotated logs: root@proxy-server:~# ls /var/log/squid/ access.log access.log.1 cache.log cache.log.1 store.log store.log.1 So maybe sarg installed logrotate with it? Or it comes with the standard Ubuntu? I don't remember I installed it manuallly. The question is: What could've gone wrong? Does it have something to do with rotating the log? How can I trace the error and start generating reports again?

    Read the article

  • Failed to start up after upgrading software in ubuntu 10.10

    - by Landy
    I've been running Ubuntu 10.10 in a physical x86-64 machine. Today Update Manager reminded me that there are some updates to install and I confirmed the action. I should had read the update list but I didn't. I can only remember there is an update about cups. After the upgrading, Update Manager requires a restart and I confirmed too. But after the restart, the computer can't start up. There are errors in the console. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. [xxx]usb 1-8: new high speed USB device using ehci_hcd and address 3 [xxx]usb 2-1: new full speed USB device using ohci_hcd and address 2 [xxx]hub 2-1:1.0: USB hub found [xxx]hub 2-1:1.0: 4 ports detected [xxx]usb 2-1.1: new low speed USB device using ohci_hcd and address 3 Gave up waiting for root device. Common probles: - Boot args (cat /proc/cmdline) - Check rootdelay=(did the system wait long enough) - Check root= (did the system wait for the right device?) - Missing modules (cat /proc/modules; ls /dev) FATAL: Could not load /lib/modules/2.6.35-22-generic/modules.dep: No such file or directory FATAL: Could not load /lib/modules/2.6.35-22-generic/modules.dep: No such file or directory ALERT! /dev/sda1 does not exist. Dropping to a shell! BusyBox v1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell(ash) Enter 'help' for a list of built-in commands. (initramfs)[cursor is here] At the moment, I can't input anything in the console. The keyboard doesn't work at all. What's wrong? How can I check boot args or "root=" as suggested? How can I fix this issue? Thanks. =============== PS1: the /dev/sda1 is type ext4 (rw,nosuid,nodev) PS2: the /dev/sda1 can be mounted and accessed successfully under SUSE 11 SP1 x64.

    Read the article

  • Windows Server 2008 R2 Firewall - Interface specific rules

    - by Mehmet Ergut
    I'm trying to define per interface rules, much like it was in Server 2003. We will be replacing our old 2003 server with a new 2008 R2 server. The server runs IIS and SQL Server. It's a dedicated server at the hosting company. We use a OpenVPN connection from the office to access SQL server, RDesktop, FTP and other administrative services. Only http and ssh is listening on the public interface. On the old server running 2003, I was able to define global rules for http and ssh, and allow other services only on the vpn interface. I can't find a way to do the same on 2008 R2. I understand that there is the Network Location Awareness service, firewall rules are applied according to the current network location. But I don't understand the purpose of this on a server. The only close solution I found is to set the scope on the firewall rule and restrict remote ip addresses to the private subnet of the office. But the ports will still be listening on the public interface. So how can I restrict a firewall rule to the connections coming from the vpn interface ? A note on this page states that scoping a rule to an interface does not exist anymore: In earlier versions of Windows, many of these command accepted a parameter called interface. This parameter is not supported in the firewall context in Windows Vista or later versions of Windows. I can't believe that they simply decided to remove a core firewall functionality that every firewall has. There must be a way to restrict a rule to an interface. Any ideas ? I'm still unable to find an adequate solution to my problem. So for now, my workaround is this: Administrative services listen on VPN IP address Firewall rules restrict the scope to the local IP address of VPN Public services listen on all interfaces, no scope restriction on firewall rules This is not optimal, if I change the IP address of the VPN, I need to edit the firewall rules too. It won't be the case if the rules were bound to the interface.

    Read the article

  • VMware server 2.0 SYN/ACK repeating issues

    - by user65579
    VMWare Server 2.0.0 Build 122956 I am having some issues with connecting into a guest VM (Ubuntu linux 4.4.3-4 lucid) running under VMware 2.0 on a windows server host. All connections to and from the VM's work fine, except for FTP. I thought the issue was the FTP daemon at first but it has been ruled out that it is not the daemon or the server itself. When you try to connect to the FTP server from outside of the host OS it fails with a "421 Service not available" but when you try and connect from the local VM or from the host OS the connection goes through fine. I have ran many packet sniffs using wireshark/tcpdump from the VM, the host OS, and the client connecting, the most informative is the host OS. I have attached a PNG of the relavant packets that were captured. I viewed some other network traffic that was sniffed (WWW specifically) and it seems to do the same syn/ack repeating but the user doesnt see any issues. I have disabled the firewall and the issues persisits, I have tried with specific allow rules to ensure the data is allowed and no changes. It appears like VMware attempts to do the ICMP redirect and it works, but then it vmware repeats the packets sent so you get 3 syn/ack's for every one syn from the client. Also VMWare appears to be attempting to establish an FTP connection between the HOST OS and the GUEST OS, because I see the second SYN sent from the HOST OS to the GUEST to initiate a new connection, and it get the appropriate SYN/ACK followed by an ACK, but the client never sees any of this from its end. EG. syn from client syn/ack from host OS to client syn/ack from guest OS to client syn/ack from host OS to client The same thing happens when the connection reset is attempted, RST's start being sent and repeated, the server responds with a valid header to continue the FTP handshake but the RST acknowledgement is allready issued and things are closed. I am not 100% if this is a bug in VMware or possibly a VMNetwork missconfiguration. Does anyone have any thoughts on where exactly the issue could be, things to try to verify or rule out? I have linked to a picture of the relevant packets sniffed from the host OS. http://img18.imageshack.us/img18/7789/vmwareftpconnection.jpg

    Read the article

  • how do i install intermediate certificate

    - by getmizanur
    I have installed private key (pem encoded) and public key certificate (pem encoded) on amazon load balancer however when i check the ssl with site test tool (http://www.networking4all.com/en/support/tools/site+check/), i get the following error Error while checking the SSL Certificate!! Unable to get the local issuer of the certificate. The issuer of a locally looked up certificate could not be found. Normally this indicates that not all intermediate certificates are installed on the server. i converted crt file to pem using these command from this tutorial openssl x509 -in input.crt -out input.der -outform DER openssl x509 -in input.der -inform DER -out output.pem -outform PEM during setting up of amazon load balancer only option i left out was certificate chain (pem encoded) however this was optional. could this be cause of my issue? and if so i how do i create certificate chain? for the last question i have tried googling however i'm getting more confused than before. please help many thanks in advance. UPDATE @all thanks for the helpful advice. if you make request to verisign they will give you a certificate chain however this chain includes public crt, intermediate crt and root crt. make sure to remove the public crt from your certificate chain (which is the top most certificate) before adding it to your certification chain box of your amazon load balancer. if you are making https request from an android app then above instruction may not work for older android os such as 2.1 and 2.2. to make it work on older android os [https://knowledge.verisign.com/support/ssl-certificates-support/index?page=content&id=AR657&actp=LIST&viewlocale=en_US]. on this link click on "retail ssl" tab and then click on "secure site" "CA Bundle for Apache Server". copy and past these intermediate certs into certificate chain box. just incase if you have not found it here is the direct link [https://knowledge.verisign.com/support/ssl-certificates-support/index?page=content&id=AR1409] if you are using geo trust certificates then solution is much the same for android devices however you need to copy and past their intermediate certs for android. PS: sorry for the long urls however "new users can only post a maximum of two hyperlinks"

    Read the article

  • freebsd-update from 8.3-RELEASE to 9.0-RELEASE: How to deal with dozens of diffs?

    - by Stefan Lasiewski
    I am upgrading a FreeBSD 8.3-RELEASE system to FreeBSD 9.0-RELEASE using freebsd-update. This is my first time performing a major version upgrade in FreeBSD. At one point in the process, freebsd-update performs a diff on files which are different then what is expected for the 9.0-RELEASE. It compares the current version on the system with the new changes added from 9.0-RELEASE. There are dozens of files in the list. Thus, I am presented with dozens and dozens of diffs which open in a vi window and look like this: The following file could not be merged automatically: /etc/ntp.conf Press Enter to edit this file in vi and resolve the conflicts manually... ### vi window opens <<<<<<< current version driftfile /etc/ntp/drift ======= # # $FreeBSD: release/9.0.0/etc/ntp.conf 195652 2009-07-13 05:51:33Z dwmalone $ # # Default NTP servers for the FreeBSD operating system. # # Don't forget to enable ntpd in /etc/rc.conf with: # ntpd_enable="YES" # # The driftfile is by default /var/db/ntpd.drift, check # /etc/defaults/rc.conf on how to change the location. # >>>>>>> 9.0-RELEASE restrict default notrust nomodify ignore And so on. This requires that I manually edit each file and remove the strings like <<<<<<< current version >>>>>>> 9.0-RELEASE and =======. As I discovered afterwards, if I don't remove these strings, they end up in the file afterwards. There are dozens of files which differ between 8.3 and 9.0, and I have a dozen local modifications myself. It appears that freebsd-update is using a diff, sdiff or mergemaster function of some sort, but I can't tell what it is doing exactly. Processing these files is tedious. Is there a way that I can just say "Accept new version" or "keep old version" or "Your merge is correct"? There has got to be an easier way to deal with these files. I must be missing something. This isn't a huge problem for one machine, but eventually I'll be doing this dozens of times and I want to find an easier way.

    Read the article

  • sub domains with /etc/hosts and apache for gitorious

    - by QLands
    I managed to have a local install of Gitorious. Now I need to finalize the apache integration using a virtual server but nothing seems to work. See for example my /etc/hosts file: 127.0.0.1 localhost 172.26.17.70 darkstar.ilri.org darkstar 172.26.17.70 git.darkstar.ilri.org My vhosts.conf has the following entries: # # Use name-based virtual hosting. # NameVirtualHost *:80 <VirtualHost *:80> <Directory /srv/httpd/htdocs> Options Indexes FollowSymLinks ExecCGI AllowOverride None Order allow,deny Allow from all </Directory> ServerName darkstar.ilri.org DocumentRoot /srv/httpd/htdocs ErrorLog /var/log/httpd/error_log AddHandler cgi-script .cgi </VirtualHost> <VirtualHost *:80> <Directory /srv/httpd/git.darkstar.ilri.org/gitorious/public> Options FollowSymLinks ExecCGI AllowOverride None Order allow,deny Allow from All </Directory> AddHandler cgi-script .cgi DocumentRoot /srv/httpd/git.darkstar.ilri.org/gitorious/public ServerName git.darkstar.ilri.org ErrorLog /var/www/git.darkstar.ilri.org/log/error.log CustomLog /var/www/git.darkstar.ilri.org/log/access.log combined AddOutputFilterByType DEFLATE text/html text/plain text/xml text/javascript text/css application/x-javascript BrowserMatch ^Mozilla/4 gzip-only-text/html BrowserMatch ^Mozilla/4\.0[678] no-gzip BrowserMatch \bMSIE !no-gzip !gzip-only-text/html <FilesMatch "\.(ico|pdf|flv|jpg|jpeg|png|gif|js|css|swf)$"> ExpiresActive On ExpiresDefault "access plus 1 year" </FilesMatch> FileETag None RewriteEngine On RewriteCond %{DOCUMENT_ROOT}/system/maintenance.html -f RewriteCond %{SCRIPT_FILENAME} !maintenance.html RewriteRule ^.*$ /system/maintenance.html [L] </VirtualHost> Now, when I go with Firefox to darkstar.ilri.org it shows the default Apache screen: "It works!". but when I go to git.darkstar.ilri.org it waits for few seconds then falls to darkstar.ilri.org and the default apache page. No error is reported. If I run httpd -S I get: VirtualHost configuration: wildcard NameVirtualHosts and _default_ servers: *:80 is a NameVirtualHost default server darkstar.ilri.org (/etc/httpd/extra/httpd-vhosts.conf:21) port 80 namevhost darkstar.ilri.org (/etc/httpd/extra/httpd-vhosts.conf:21) port 80 namevhost git.darkstar.ilri.org (/etc/httpd/extra/httpd-vhosts.conf:37) Syntax OK The funny thing is that if I configure gotirious in a host called gitrepository, add 127.0.0.1 gitrepository and go with Firefox to gitrepository.. Gitorious works... But why not with git.darkstar.ilri.org? Many thanks in advance.

    Read the article

  • Routing table with two NIC adapters in libvirt/KVM

    - by lzap
    I created a virtual NAT network (192.168.100.0/24 network) in my libvirt and new guest with two interfaces - one in this network, one as bridged (10.34.1.0/24 network) to the local LAN. The reason for that is I need to have my own virtual network for my DHCP/TFTP/DNS testing and still want to access my guest externally from my LAN. On both networks I have working DHCP, both giving them IP addresses. When I setup NAT port forwarding (e.g. for ssh), I can connect to the eth0 (virtual network), everything is fine. But when I try to access the eth1 via bridged interface, I have no response. I guess I have problem with my routing table - outgoing packets are routed to the virtual NAT network (which has access to the machine I am connecting from - I can ping it). But I am not sure if this setup is correct. I think I need to add something to my routing table. # ifconfig eth0 Link encap:Ethernet HWaddr 52:54:00:B4:A7:5F inet addr:192.168.100.14 Bcast:192.168.100.255 Mask:255.255.255.0 inet6 addr: fe80::5054:ff:feb4:a75f/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:16468 errors:0 dropped:27 overruns:0 frame:0 TX packets:6081 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:22066140 (21.0 MiB) TX bytes:483249 (471.9 KiB) Interrupt:11 Base address:0x2000 eth1 Link encap:Ethernet HWaddr 52:54:00:DE:16:21 inet addr:10.34.1.111 Bcast:10.34.1.255 Mask:255.255.255.0 inet6 addr: fe80::5054:ff:fede:1621/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:34 errors:0 dropped:0 overruns:0 frame:0 TX packets:189 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4911 (4.7 KiB) TX bytes:9 # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.100.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 10.34.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1003 0 0 eth1 0.0.0.0 192.168.100.1 0.0.0.0 UG 0 0 0 eth0 Network I am trying to connect from is different than network the hypervisor is connected to: 10.36.0.0. But it is accessible from that network. So I tried to add new route rule: route add -net 10.36.0.0 netmask 255.255.0.0 dev eth1 And it is not working. I thought setting correct interface would be sufficient. What is needed to get my packets coming through?

    Read the article

  • How to generate build no with SVN revision no & Maven buildNumber plugin.

    - by Binit jha
    Hi, I am using mvn buildNumber plugin to generate build no with latest svn revision no. But, our version is not resolve to ${buildNumber} in the duration of installing in .m2 local reposotry. here is the our pom details: <modelVersion>4.0.0</modelVersion> <groupId>com.hp.cloudprint</groupId> <artifactId>testutils</artifactId> <name>testutils</name> <version>6.3.rel.${buildNumber}</version> <description>This jar contains some helper classes which can simplify the writing of JUnit test cases.</description> <dependencies> <plugin> <groupId>org.codehaus.mojo</groupId> <artifactId>buildnumber-maven-plugin</artifactId> <executions> <execution> <id>useLastCommittedRevision</id> <phase>validate</phase> <goals> <goal>create</goal> </goals> </execution> </executions> <configuration> <doCheck>false</doCheck> <doUpdate>true</doUpdate> <getRevisionOnlyOnce>true</getRevisionOnlyOnce> </configuration> </plugin> <scm> <connection>scm:svn:https://acn-platform</connection> <developerConnection>scm:svn:https://abc-platform/trunk</developerConnection> </scm>. </project> Building jar: C:\Documents and Settings\hpadmin\workspace\testutils\target\testutils-6.3.rel.2930.jar [INFO] [install:install] [INFO] Installing C:\Documents and Settings\hpadmin\workspace\testutils\target\testutils-6.3.rel.2930.jar to C:\Documents and Settings\jhab.m2*\repository\com\hp\cloudprint\testutils\6.3.rel.${buildNumber}\testutils-6.3.rel.${buildNumber}.jar** [INFO] ------------------------------------------------------------------------ [INFO] BUILD SUCCESSFUL Target generated correct jar. testutil-6.3.rel.2297.jar* Thanks in advance Binit

    Read the article

< Previous Page | 615 616 617 618 619 620 621 622 623 624 625 626  | Next Page >