Search Results

Search found 24475 results on 979 pages for 'vmware view'.

Page 619/979 | < Previous Page | 615 616 617 618 619 620 621 622 623 624 625 626  | Next Page >

• long access times and errors in iis application

  - by user55862

  I am having an issue with an IIS application (details of environment at the end of the message). The web site works great most of the time and I cannot reproduce any error in our test system. On the live system however with on averare of 5-15 requests per second I have a problem with that some requests (about 0.05%) will take over 300 seconds to complete. The other requests complete withing 5-10 seconds. It seem like if all the errornous requests end up with a Timer_EntityBody error in the error log. I have never seen this as an end user but I guess that they will receive some kind of error message. I am trying to find out what can be causing this errornous behaviour. Any ideas are welcome. I have read something about that there can be an MTU issue if ICMP and MTU protocols are blocked in the firewall. Does that sound reasonable? I have also read about updating to IIS 7 should do the trick. Does it sound reasonable? I think that the problem has another cause but I have no idea of what. I have tried running hte perormance monitor, monitoring for database locks and active transaction counts. I can see some of these in the perfmon log for the MSSQL server (another machine) for example: Active transactions is sometimes peaking and sometimes for long periods Lock waits per seconds is sometimes peaking Transactions per second is sometimes peaking Page IO Latch wait is sometimes peaking Lock wait time (ms) is sometimes peaking But I cannot see that any of these correlate to the errors in the IIS error log. On the IIS server machine I can also see with perfmon that some values peak a few times during a day: Request execution time Avg disk queue length I can neither see that any of these correlate to the errors in the IIS error log. In the below code I have anonymized by replacing some parts with HIDDEN The following can be seen in the access log 2010-10-01 08:35:05 W3SVC1301873091 **HIDDEN** POST /**HIDDEN**/Modules/BalanceModule.aspx - 80 - **HIDDEN** Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.1;+.NET+CLR+2.0.50727;+.NET+CLR+3.0.4506.2152;+.NET+CLR+3.5.30729;+.NET4.0C;+.NET4.0E) ASP.NET_SessionId=**HIDDEN** 400 0 64 0 2241 127799 At the same time the following can be seen in the error log: 2010-10-01 08:35:05 **HIDDEN** 1999 **HIDDEN** 80 HTTP/1.0 POST /**HIDDEN**/Modules/BalanceModule.aspx - 1301873091 Timer_EntityBody Test+Pool I can tell the following about the environment: Server: Windows Server 2003 x64 SP2 running on VMWare HTTP Server: IIS v6.0 with ASP.NET 2.0.50727 Antivirus: Trend Micro OfficeScan (Is it a good idea to have this on a server?)

  Read the article

• kernel panic after LVM setup

  - by Manuel Sopena Ballesteros

  I broke my webserver... My setup is: VMWare ESXi environemt CPanel installed CentOS release 6.5 (Final) 4 CPUs 2G RAM 2x VM disks 100G each LVM system This was my previous storage settings (the server was working fine at this time): # df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_test01-lv_root 95G 1.4G 88G 2% / tmpfs 939M 0 939M 0% /dev/shm /dev/sdb1 99G 188M 94G 1% /tmp /dev/sda1 485M 54M 407M 12% /boot My web developer asked me to merge /tmp and / disks so this is what I did: Delete /dev/sdb1 partition using fdisk Create a new partition as LVM on /dev/sdb1 using fdisk Create a new physical volume -- pvcreate /dev/sdb1 Extend volume group -- vgextend /dev/sdb1 vg_test01 Extend logical volume -- lvextend -l +100%FREE /dev/vg_test01/lv_root Resize filesystem -- resize2fs /dev/vg_test01/lv_root This is the new configuration: # df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_test01-lv_root 213G 105G 97G 52% / tmpfs 939M 0 939M 0% /dev/shm /dev/sda1 485M 54M 407M 12% /boot /usr/tmpDSK 4.0G 145M 3.6G 4% /tmp Since I have the new settings my web server is throwing kernel panics quite often (around every 2 days). The message says: INFO: task <taskName>:<pid> blocked for more than 120 seconds. The list of process affected that I can see from the console are: mysqld queueprocd httpd suphp vmtoolsd loop0 auditd The only way I can fix this is reseting (cold reboot) the VM. I don't think it is a hardware issue as sar is not showing any bottleneck: Linux 2.6.32-431.3.1.el6.x86_64 (test01) 08/22/2014 _x86_64_ (4 CPU) 12:00:01 AM CPU %user %nice %system %iowait %steal %idle 12:10:01 AM all 26.86 0.01 0.98 0.57 0.00 71.57 12:20:01 AM all 1.78 0.02 1.03 0.08 0.00 97.09 12:30:01 AM all 26.34 0.02 0.85 0.05 0.00 72.74 12:40:01 AM all 27.12 0.01 1.11 1.22 0.00 70.54 12:50:01 AM all 1.59 0.02 0.94 0.13 0.00 97.32 01:00:01 AM all 26.10 0.01 0.77 0.04 0.00 73.07 01:10:01 AM all 27.51 0.01 1.16 0.14 0.00 71.18 01:20:01 AM all 1.80 0.07 1.06 0.08 0.00 96.99 01:30:01 AM all 26.19 0.01 0.78 0.05 0.00 72.96 01:40:01 AM all 26.62 0.02 0.87 0.05 0.00 72.45 01:50:02 AM all 1.35 0.01 0.87 0.02 0.00 97.75 02:00:01 AM all 26.11 0.02 0.69 0.02 0.00 73.17 02:10:01 AM all 26.73 0.02 0.89 0.14 0.00 72.21 02:20:01 AM all 1.45 0.01 0.92 0.04 0.00 97.58 02:30:01 AM all 26.59 0.01 1.06 0.03 0.00 72.31 02:40:01 AM all 26.27 0.01 0.72 0.05 0.00 72.95 02:50:01 AM all 0.86 0.01 0.50 0.09 0.00 98.53 03:00:01 AM all 25.61 0.02 0.39 0.03 0.00 73.96 03:10:01 AM all 26.30 0.08 0.66 0.14 0.00 72.82 03:20:01 AM all 0.81 0.01 0.51 0.04 0.00 98.63 03:30:02 AM all 26.15 0.02 0.53 0.07 0.00 73.24 03:40:01 AM all 26.06 0.01 0.47 0.04 0.00 73.42 03:50:01 AM all 0.96 0.02 0.51 0.03 0.00 98.48 Average: all 17.69 0.02 0.79 0.14 0.00 81.36 06:58:14 AM LINUX RESTART 07:00:01 AM CPU %user %nice %system %iowait %steal %idle 07:10:01 AM all 1.04 0.02 0.57 0.95 0.00 97.42 07:20:02 AM all 0.66 0.01 0.39 0.06 0.00 98.87 07:30:01 AM all 25.71 0.01 0.45 0.16 0.00 73.67 07:40:01 AM all 25.88 0.01 0.35 0.08 0.00 73.68 07:50:01 AM all 1.13 0.02 0.55 0.11 0.00 98.19 As you can see the server became unresponsive at 03.50 AM and I had to reset the VM at 06.58 AM to bring the website up again. I would appreciate any help/assistance to fix this issue. thank you very much

  Read the article

• Ubuntu web server 11.10 ftp/server issue

  - by Nate

  I was wondering if I could get some help with FTP, atleast I'm pretty sure it has to do with FTP. Although it could have to do with something else, I'm not 100% sure.. Now, for fare warning, I'm no ubuntu dominator, I'm pretty newb. Anyway, I've attempted to build a webserver to to test php and what not for a site I'm building. Now everything works, the php, the sql etc. By the way, I built this in VMware, so it's virtual, over a network, so I can access stuff from anywhere. I'm in a college right now so yeah. The one problem I have is this. I go into the terminal, and do ifconfig to find my IP. I get it and go to a browser on a different machine and type that IP in. I get the "index of/" page, where I can browse the website I'm making. I can click through folders and what not. I can click on things and they open up. Now lets say I'm working on my desktop and open up an FTP and drag and drop something into there, go to the IP in the browser again and try to open it. I either get "Server error The website encountered an error while retrieving http://my_server_ip/phpinfo.php. It may be down for maintenance or configured incorrectly. Here are some suggestions: Reload this webpage later." or "Forbidden You don't have permission to access /html.html on this server." But, lets say I make it on the server itself, and try, bam, magic it works. I'm sure I set the permissions to let everyone open and view the files, but maybe I didn't? I'm not sure, and this is where I was hoping I could get some help. By the way, I followed a tutorial on changing the www folder (apache) from /var/www to home/"user"/www. I can't recall how I did that, but it's there and my ftp goes to the home/"user"/www folder. But yeah, any and all help is appreciated. Like I said, I'm really new to this, but I do enjoy attempting to make these servers and learning how they work, so it's not like making this webserver is a project for a class, It's just assisting me in testing stuff for another class and possibly other websites later on down the road. Anyway, anyone who decides to help, thanks so much, I'd really appreciate it. Nate. P.S. I'm using Ubuntu 11.10 desktop edition with a LAMP server

  Read the article

• Passive FTP on Windows Server 2008 R2 using the IIS7 FTP-Server

  - by ntor

  Hello serverFault-community! During the last few days I have been setting up a Windows Server 2008 R2 in a VMware. I installed the standard FTP-Server on it by using the Webserver (IIS)-role. Everything works fine with accessing my FTP-Site with ftp://localhost in Firefox. I can also get access to it via the local IP of my Server. Actually everything works fine in my LAN. But here's my problem: I want to get access "from outside", using the external IP or a dyndns-URL. I have a LinkSys-Router in front of my Server, therefore I'm forwarding all the important ports. If you may now think "this idiot has probably forgotten some ports", I must dissappoint you. It even works getting access to my Server-Website and messing around in some WebInterfaces. The problem is my passive FTP (active works for me). I always get a timeout, when e.g. FileZilla waits for a response to the LIST-command. The one big thing I don't get, is, why my Server sends a response to the PASV-command, naming a port like 40918, even if I have restricted the data port range for my passive FTP ( in the IIS-Manager) to e.g. [5000-5009]. I simply don't want to open and forward all possible data ports! And another thing is, I can't specify a static external IP-adress for my server, since I don't own any. I hope I have explained my problem in a comprehensible way. If not, simply ask by posting a comment! LG ntor PS: I have already mainly tried following articles: Out Of Band FTP 7 shows "Operation timed out" How to Configure Windows Firewall for a Passive Mode FTP Server ServerFault --- Passive ftp on Server 2008 --- EDIT: --- There is one idea rising up in my mind: When I use FileZilla to connect by passive mode I always get something like this: 227 Entering Passive Mode (192,168,1,102,160,86) According to a Rhinosof-article FZ tries to connect on port "160*256+86 = 41046", although I have restricted the data ports (as mentioned above). Could this be caused by the router, that doesn't forward out-ports directly, but uses different ones? (-- The IP-Adress given is the local one, since I'm not able to define a static external in the IIS-Mgr)

  Read the article

• Benchmarking hosting providers IO with Bonnie

  - by Derek Organ

  Ok, because of a bunch of projects I'm working on I've access to dedicated Servers on a 3 hosting providers. As an experiment and for educational purposes I decided to see if I could benchmark how good the IO is with each. Bit of research lead me to Bonnie++ So I installed it on the server and ran this simple command /usr/sbin/bonnie -d /tmp/foo The 3 machines in different hosting providers are all dedicated machines, one is a VPS, other two are on some cloud platform e.g. VMWare / Xen using some kind of clustered SAN for storage This might be a naive thing to do but here are the results I found. HOST A Version 1.03c ------Sequential Output------ --Sequential Input- --Random- -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks-- Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP xxxxxxxxxxxxxxxx 1G 45081 88 56244 14 19167 4 20965 40 67110 6 67.2 0 ------Sequential Create------ --------Random Create-------- -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete-- files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP 16 15264 28 +++++ +++ +++++ +++ +++++ +++ +++++ +++ +++++ +++ xxxxxxxx,1G,45081,88,56244,14,19167,4,20965,40,67110,6,67.2,0,16,15264,28,+++++,+++,+++++,+++,+++++,+++,+++++,+++,+++++,+++ HOST B Version 1.03d ------Sequential Output------ --Sequential Input- --Random- -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks-- Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP xxxxxxxxxxxx 4G 43070 91 64510 15 19092 0 29276 47 39169 0 448.2 0 ------Sequential Create------ --------Random Create-------- -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete-- files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP 16 24799 52 +++++ +++ +++++ +++ 25443 54 +++++ +++ +++++ +++ xxxxxxx,4G,43070,91,64510,15,19092,0,29276,47,39169,0,448.2,0,16,24799,52,+++++,+++,+++++,+++,25443,54,+++++,+++,+++++,+++ HOST C Version 1.03c ------Sequential Output------ --Sequential Input- --Random- -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks-- Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP xxxxxxxxxxxxx 1536M 15598 22 85698 13 258969 20 16194 22 723655 21 +++++ +++ ------Sequential Create------ --------Random Create-------- -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete-- files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP 16 14142 22 +++++ +++ 18621 22 13544 22 +++++ +++ 17363 21 xxxxxxxx,1536M,15598,22,85698,13,258969,20,16194,22,723655,21,+++++,+++,16,14142,22,+++++,+++,18621,22,13544,22,+++++,+++,17363,21 Ok, so first off what is the best way to read the figures and are there any issues with really comparing these numbers? Is this in any way a true representation of IO Speed? If not is there any way for me to test that? Note: these 3 machines are using either Ubuntu or Debian (I presume that doesn't really matter)

  Read the article

• Installing Glassfish 3.1 on Ubuntu 10.10 Server

  - by andand

  I've used the directions here to successfully install Glassfish 3.0.1 on an virtualized (VirtualBox and VMWare) Ubuntu 10.10 Server instance without any real difficulty not resolved by more closely following the directions. However when I try applying them to Glassfish 3.1, I seem to keep getting stuck at section 6. "Security configuration before first startup". In particular, there are some differences I noted: 1) There are two keys in the default keystore. The 's1as' key is still there, but another named 'glassfish-instance' is also there. When I saw this, I deleted and recreated them both along with a 'myAlias' key which I was going to use where needed. 2) When turning the security on it seems like part of the server thinks it's on, but others don't. For instances: $ /home/glassfish/bin/asadmin set server-config.network-config.protocols.protocol.admin-listener.security-enabled=true server-config.network-config.protocols.protocol.admin-listener.security-enabled=true Command set executed successfully. $ /home/glassfish/bin/asadmin get server-config.network-config.protocols.protocol.admin-listener.security-enabled server-config.network-config.protocols.protocol.admin-listener.security-enabled=true Command get executed successfully. $ /home/glassfish/bin/asadmin --secure list-jvm-options It appears that server [localhost:4848] does not accept secure connections. Retry with --secure=false. javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake Command list-jvm-options failed. $ /home/glassfish/bin/asadmin --secure=false list-jvm-options -XX:MaxPermSize=192m -client -Djavax.management.builder.initial=com.sun.enterprise.v3.admin.AppServerMBeanServerBuilder -XX: UnlockDiagnosticVMOptions -Djava.endorsed.dirs=${com.sun.aas.installRoot}/modules/endorsed${path.separator}${com.sun.aas.installRoot}/lib/endorsed -Djava.security.policy=${com.sun.aas.instanceRoot}/config/server.policy -Djava.security.auth.login.config=${com.sun.aas.instanceRoot}/config/login.conf -Dcom.sun.enterprise.security.httpsOutboundKeyAlias=s1as -Xmx512m -Djavax.net.ssl.keyStore=${com.sun.aas.instanceRoot}/config/keystore.jks -Djavax.net.ssl.trustStore=${com.sun.aas.instanceRoot}/config/cacerts.jks -Djava.ext.dirs=${com.sun.aas.javaRoot}/lib/ext${path.separator}${com.sun.aas.javaRoot}/jre/lib/ext${path.separator}${com.sun.aas.in stanceRoot}/lib/ext -Djdbc.drivers=org.apache.derby.jdbc.ClientDriver -DANTLR_USE_DIRECT_CLASS_LOADING=true -Dcom.sun.enterprise.config.config_environment_factory_class=com.sun.enterprise.config.serverbeans.AppserverConfigEnvironmentFactory -Dorg.glassfish.additionalOSGiBundlesToStart=org.apache.felix.shell,org.apache.felix.gogo.runtime,org.apache.felix.gogo.shell,org.apache.felix.gogo.command -Dosgi.shell.telnet.port=6666 -Dosgi.shell.telnet.maxconn=1 -Dosgi.shell.telnet.ip=127.0.0.1 -Dgosh.args=--nointeractive -Dfelix.fileinstall.dir=${com.sun.aas.installRoot}/modules/autostart/ -Dfelix.fileinstall.poll=5000 -Dfelix.fileinstall.log.level=2 -Dfelix.fileinstall.bundles.new.start=true -Dfelix.fileinstall.bundles.startTransient=true -Dfelix.fileinstall.disableConfigSave=false -XX:NewRatio=2 Command list-jvm-options executed successfully. Also the admin console responds only to http (not https) requests. Thoughts?

  Read the article

• Can't ping devices by IP address for devices allocated IPs by DHCP

  - by GiddyUpHorsey

  I have a home network with a Trendnet wireless router and a Windows Domain. The Domain Controller/DNS server is a Windows 2000 Server and is configured to forward queries to DNS servers provided by the ISP. The router provides DHCP and is configured with the Windows 2000 Server as the DNS server. The network has been set up for a couple of years and usually works fine. When I connect iPhones to the network over WiFi, the router can ping the iPhones through its browser based admin interface, but Windows machines that are part of the Windows Domain cannot. A laptop was connected to the network over WiFi that wasn't joined to the domain and it could see the iPhones. The router UI shows that the laptop has a reserved IP allocated via DHCP. All machines either have a static or DHCP allocated IP on the 192.168.0.* subnet. Router - 192.168.0.1 - Static - Wired Windows Domain Controller - 192.168.0.8 - Static - Virtual Windows 7 Workstation - 192.168.0.200 - DHCP Auto - Wired VMWare ESXi Host - 192.168.0.201 - Static? - Wired iPhone 1 - 192.168.0.202 - DHCP Auto - WiFi iPhone 2 - 192.168.0.203 - DHCP Auto - WiFi Windows Vista Laptop - 192.168.0.204 - DHCP Reserved - WiFi Using the Windows 7 machine (200), I try to ping each machine and the only DHCP machine that responds is itself. The other DHCP machines fail with Reply from 192.168.0.200: Destination host unreachable.. Using nslookup fails with *** domain.controller.name can't find 192.168.0.203: Non-existent domain. Using the Windows 2000 Domain Controller (8), I try to ping each machine and the only DHCP machine that responds is the Windows 7 machine (200). Pinging the other DHCP machines fails with Request timed out.. Using nslookup also fails with *** domain.controller.name can't find 192.168.0.203: Non-existent domain. Using the iPhone 2 (203), I try to ping (Network Ping Lite) the machines with static IP addresses and that works fine. When I try to ping the Windows 7 machine (200) it is unable to get a response. How do I configure the DNS server/Windows Domain/Router properly so that the Windows Domain machines can see the IPs allocated via DHCP?

  Read the article

• jsf submit button not wrking

  - by tejas-a

  I am using hx:commandExButton of IBM Faces Client Framework to call my method. But the method is not getting called. But if I use immediate="true" it's getting called. But as you all know with this my model won't get updated, so it has no use to me. Has anyone faced this? Check the hx:commandExButton id="btnSearch" <%-- tpl:metadata --%> <%-- jsf:pagecode language="java" location="/src/pagecode/view/costestimation/SearchAssignee.java" --%><%-- /jsf:pagecode --%> <%-- /tpl:metadata --%> <%@taglib prefix="f" uri="http://java.sun.com/jsf/core"%><%@taglib prefix="h" uri="http://java.sun.com/jsf/html"%><%@taglib uri="http://www.ibm.com/jsf/html_extended" prefix="hx"%><%@taglib uri="http://java.sun.com/portlet_2_0" prefix="portlet"%><%@taglib uri="http://www.ibm.com/xmlns/prod/websphere/portal/v6.1/portlet-client-model" prefix="portlet-client-model"%><%@page language="java" contentType="text/html; charset=ISO-8859-1" pageEncoding="ISO-8859-1"%><portlet-client-model:init> <portlet-client-model:require module="ibm.portal.xml.*" /> <portlet-client-model:require module="ibm.portal.portlet.*" /> </portlet-client-model:init> <portlet:defineObjects /> <link rel="stylesheet" type="text/css" title="Style" href="../../theme/stylesheet.css"> <f:view> <f:loadBundle var="giamsBundle" basename="com.ibm.costprojectionportlet.nl.GIAMSResourceBundle" /> <hx:viewFragment id="viewFragment1"> <hx:scriptCollector id="scriptCollector1"> <script language="JavaScript" src='<%=renderResponse.encodeURL(renderRequest .getContextPath() + "/js/common.js")%>'></script> <h:outputText value="<br/>" escape="false" /> <h:outputText id="titleSearch" styleClass="outputText" value="#{giamsBundle['title.search']}" escape="false"></h:outputText> <h:outputText value="<br/>" escape="false" /> <h:messages style="font-weight:bold;color:red;" layout="table"></h:messages> <hx:panelSection styleClass="panelSection" title="SearchCriteria" id="searchCriteriaPanel" initClosed="false" style="border-width: thin; border-style: groove"> <h:form styleClass="form" id="searchCriteriaForm"> <h:messages style="font-weight:bold;color:red;" layout="table"></h:messages> <h:panelGrid columns="2" cellpadding="1" border="0" width="100%"> <h:column> <hx:panelFormBox helpPosition="over" labelPosition="left" styleClass="panelFormBox" id="formBoxLeft"> <hx:formItem styleClass="formItem" id="frmLastName" label="#{giamsBundle['lbl.search.lastname']}" escape="false"> <h:inputText styleClass="inputText" size="20" id="txtLastName" value="#{pc_SearchAssignee.assignee.lastName}"> </h:inputText> </hx:formItem> <hx:formItem styleClass="formItem" id="frmHomeCountrySerial" label="#{giamsBundle['lbl.search.homecountryserial']}" escape="false"> <h:inputText styleClass="inputText" size="20" id="txtHomeCountrySerial" value="#{pc_SearchAssignee.assignee.companyDetails.homeCountrySerial}"> </h:inputText> </hx:formItem> <hx:formItem styleClass="formItem" id="frmHomeCountry" label="#{giamsBundle['lbl.search.homecountry']}" escape="false"> <h:selectOneMenu styleClass="selectOneMenu" id="ddHomeCountry" value=""> <f:selectItems value="#{pc_referenceData.telephoneTypeList}" /> </h:selectOneMenu> </hx:formItem> <hx:formItem styleClass="formItem" id="frmHomeBusinessUnit" label="#{giamsBundle['lbl.search.homebusunit']}" escape="false"> <h:selectOneMenu styleClass="selectOneMenu" value="" id="ddHomeBusinessUnit"> <f:selectItems value="#{pc_referenceData.telephoneTypeList}" /> </h:selectOneMenu> </hx:formItem> <hx:formItem styleClass="formItem" id="frmforButtons" label="" escape="false"> <h:panelGroup> <hx:commandExButton styleClass="commandExButton" id="btnSearch" value="#{giamsBundle['btn.search']}" action="#{pc_SearchAssignee.searchAssignee}"> </hx:commandExButton> <hx:commandExButton styleClass="commandExButton" id="btnCancel" value="#{giamsBundle['btn.cancel']}" action="#{pc_SearchAssignee.searchAssignee}"> </hx:commandExButton> </h:panelGroup> </hx:formItem> </hx:panelFormBox> </h:column> <h:column> <hx:panelFormBox helpPosition="over" labelPosition="left" styleClass="panelFormBox" id="formBoxRight"> <hx:formItem styleClass="formItem" id="frmFirstName" label="#{giamsBundle['lbl.search.firstname']}" escape="false"> <h:inputText styleClass="inputText" size="20" id="txtFirstName" value="#{pc_SearchAssignee.assignee.firstName}"> </h:inputText> </hx:formItem> <hx:formItem styleClass="formItem" id="frmHomeNotesEmail" label="#{giamsBundle['lbl.search.homenotesemail']}" escape="false"> <h:panelGroup> <h:inputText styleClass="inputText" size="20" id="txtHomeNotesEmail" value="#{pc_SearchAssignee.assignee.lotusNotesId}"> </h:inputText> </h:panelGroup> </hx:formItem> <hx:formItem styleClass="formItem" id="frmHomeLocation" label="#{giamsBundle['lbl.search.homeloc']}" escape="false"> <h:inputText styleClass="inputText" size="20" id="txtHomeLocation" value="#{pc_SearchAssignee.assignee.homeAddress.cityName}"> </h:inputText> </hx:formItem> <hx:formItem styleClass="formItem" id="blank" label="" escape="false"> <h:outputText id="txtblank" escape="false"></h:outputText> </hx:formItem> </hx:panelFormBox> </h:column> </h:panelGrid> </h:form> <f:facet name="opened"> <hx:jspPanel id="jspPanelMainOpen"> <hx:graphicImageEx id="imageExMainOpen" styleClass="graphicImageEx" align="middle" value="/theme/img/form_header.GIF" width="100%" height="20"></hx:graphicImageEx> </hx:jspPanel> </f:facet> </hx:panelSection> <h:outputText id="titleResults" styleClass="outputText" value="#{giamsBundle['lbl.search.results']}" escape="false"></h:outputText> <h:outputText value="<br/>" escape="false" /> <hx:dataTableEx border="0" cellspacing="2" width="100%" columnClasses="columnClass1" headerClass="headerClass" footerClass="footerClass" rowClasses="rowClass1, rowClass2" styleClass="dataTableEx" id="searchAssignee" value="#{pc_SearchAssignee.assigneeList}" var="searchitr" binding="#{pc_SearchAssignee.searchDataTable}" rendered="#{pc_SearchAssignee.render}"> <hx:columnEx id="columnEx1"> <f:facet name="header"> <hx:panelBox styleClass="panelBox" id="selectPanelBox"> <hx:outputSelecticons styleClass="outputSelecticons" id="selectCheckBox"></hx:outputSelecticons> </hx:panelBox> </f:facet> <hx:inputRowSelect styleClass="inputRowSelect" value="#{searchitr.selected}" id="rowSelect"></hx:inputRowSelect> <f:facet name="header"></f:facet> </hx:columnEx> <hx:columnEx id="columnEx2"> <f:facet name="header"> <h:outputText id="lblEeId" styleClass="outputText" value="#{giamsBundle['lbl.search.eeid']}"></h:outputText> </f:facet> <h:inputText styleClass="inputText" id="dttxtEEID" value="#{searchitr.employeeID}"></h:inputText> </hx:columnEx> <hx:columnEx id="columnEx3"> <f:facet name="header"> <h:outputText id="lblFirstName" styleClass="outputText" value="#{giamsBundle['lbl.search.firstname']}"></h:outputText> </f:facet> <h:inputText styleClass="inputText" id="dttxtFirstName" value="#{searchitr.firstName}"></h:inputText> </hx:columnEx> <hx:columnEx id="columnEx4"> <f:facet name="header"> <h:outputText id="lblLastName" styleClass="outputText" value="#{giamsBundle['lbl.search.lastname']}"></h:outputText> </f:facet> <h:inputText styleClass="inputText" id="dttxtLastName" value="#{searchitr.lastName}"></h:inputText> </hx:columnEx> <hx:columnEx id="columnEx5"> <f:facet name="header"> <h:outputText id="lblHomeNotesEmail" styleClass="outputText" value="#{giamsBundle['lbl.search.homenotesemail']}"></h:outputText> </f:facet> <h:inputText styleClass="inputText" id="dttxtHomeNotesEmail" value="#{searchitr.homeAddress.addressLine1}"></h:inputText> </hx:columnEx> <hx:columnEx id="columnEx6"> <f:facet name="header"> <h:outputText id="lblHomeCountry" styleClass="outputText" value="#{giamsBundle['lbl.search.homecountry']}"></h:outputText> </f:facet> <h:inputText styleClass="inputText" id="dttxtHomeCountry" value="#{searchitr.homeAddress.addressLine1}"></h:inputText> </hx:columnEx> <hx:columnEx id="columnEx7"> <f:facet name="header"> <h:outputText id="lblHomeLocation" styleClass="outputText" value="#{giamsBundle['lbl.search.homeloc']}"></h:outputText> </f:facet> <h:inputText styleClass="inputText" id="dttxtHomeLocation" value="#{searchitr.homeTaxID}"></h:inputText> </hx:columnEx> <hx:columnEx id="columnEx8"> <f:facet name="header"> <h:outputText id="lblHomeBusUnit" styleClass="outputText" value="#{giamsBundle['lbl.search.homebusunit']}"></h:outputText> </f:facet> <h:inputText styleClass="inputText" id="dttxtHomeBusUnit" value="#{searchitr.homeTaxID}"></h:inputText> </hx:columnEx> <hx:columnEx id="columnEx9"> <f:facet name="header"> <h:outputText id="lblAssignStatus" styleClass="outputText" value="#{giamsBundle['lbl.search.assignmentstatus']}"></h:outputText> </f:facet> <h:inputText styleClass="inputText" id="dttxtAssignStatus" value="#{searchitr.homeTaxID}"></h:inputText> </hx:columnEx> </hx:dataTableEx> <h:outputText value="<br/>" escape="false" /> <hx:commandExButton type="submit" styleClass="commandExButton" rendered="#{pc_SearchAssignee.render}" id="btnContinue" value="#{giamsBundle['btn.continue']}" action="#{pc_SearchAssignee.searchAssignee}"> </hx:commandExButton> </hx:scriptCollector> </hx:viewFragment> </f:view>

  Read the article

• Apache + Tomcat error 120006 Using mod_proxy_ajp for Load Balance

  - by Wakaru44

  I have an apache 2 frontend with two nodes, and a backend with two instances of tomcat 6 balance with mod_proxy_ajp. The bbdd is in a separate machine. All machines use RHEL, 6.2 on the frontend, 5.5 on the backend. The infraestructure is virtualized using VMware. # This is the apache config in one of the virtualHost. ProxyPreserveHost On ProxyPass / balancer://liferay/ <Proxy balancer://liferay> BalancerMember ajp://lrab:8009 route=liferaya BalancerMember ajp://lrbb:8009 route=liferayb status=+H ProxySet lbmethod=byrequests nofailover=on </Proxy> The conector in tomcat is now configured like this: <!-- Define an AJP 1.3 Connector on port 8009 --> <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" URIEncoding="UTF-8" enableLookups="false" allowTrace="true" /> Do you think it could be useful to set a maxThreads parameter, like in this post?? in that case, How can i determine a proper number of threads? From time to time, we get errors like this [Tue Sep 18 17:57:02 2012] [error] ajp_read_header: ajp_ilink_receive failed [Tue Sep 18 17:57:02 2012] [error] (120006)APR does not understand this error code: proxy: read response failed from 192.168.1.104:8009 (lrab) And apache switches to the pasive node (if its active) or fails with 503. Some things i have tried so far: I think that i have some performance issues with one of the applications, Here you can see a threadDump But i'm not quite sure about it. I also started to monitor the network connection. I have noticed that there are some pings lost when i have a "ping -f " so maybe it could be a network issue, but the success rate is 100% (so the lost packets are only a few among the flood, but maybe, i don't know, enough to break the link betwen apache and tomcat). I wrote a python script to check connectivity with timestamps on the pings, so i can know when the network fails. After sniffing the network , i can also see some RST packets, but i don't know if that is a normal behaviour (some applications do that to end a network communication). I have also noticed that the applications have problems communicating with the database, but im not even sure if this could be related or not. If you think so, i can post more info about it. I changed the connector on the tomcats to use the native one, but still the same. I need not even a solution to this, but maybe some guidance on how can i troubleshoot this better ¿Analyze threads, monitor mysql performance, sniff the traffic between apaches and tomcats? Ultimately, all i need is to balance the tomcat instances in Active/pasive mode, so if there is another way to do it, i could give it a try.

  Read the article

• Reason for Null pointer Exception

  - by Rahul Varma

  Hi, I cant figure out why my program is showing null pointer exception. Plz help me...Here's the program... public class MusicListActivity extends Activity { List<HashMap<String, String>> songNodeDet = new ArrayList<HashMap<String,String>>(); HashMap<?,?>[] songNodeWeb; XMLRPCClient client; String logInSess; ArrayList<String> paths=new ArrayList<String>(); public ListAdapter adapter ; Object[] websongListObject; List<SongsList> SngList=new ArrayList<SongsList>(); Runnable r; ProgressDialog p; ListView lv; String s; @Override public void onCreate(Bundle si){ super.onCreate(si); setContentView(R.layout.openadiuofile); lv=(ListView)findViewById(R.id.list1); r=new Runnable(){ public void run(){ try{ getSongs(); } catch (MalformedURLException e) { // TODO Auto-generated catch block e.printStackTrace(); } catch (XMLRPCException e) { // TODO Auto-generated catch block e.printStackTrace(); } } }; Thread t=new Thread(r,"background"); t.start(); Log.e("***","process over"); } @Override protected void onResume() { // TODO Auto-generated method stub super.onResume(); } private Runnable returnRes = new Runnable() { @Override public void run() { Log.d("handler","handler"); removeDialog(0); p.dismiss(); list(); } }; public void list() { Log.d("#####","#####"); LayoutInflater inflater=getLayoutInflater(); String[] from={}; int[] n={}; adapter=new SongsAdapter(getApplicationContext(),songNodeDet,R.layout.row,from,n,inflater); lv.setAdapter(adapter);} private Handler handler = new Handler() { public void handleMessage(Message msg){ Log.d("*****","handler"); removeDialog(0); p.dismiss(); } }; public void webObjectList(Object[] imgListObj,String logInSess) throws XMLRPCException{ songNodeWeb = new HashMap<?,?>[imgListObj.length]; if(imgListObj!=null){ Log.e("completed","completed"); for(int i=0;i<imgListObj.length;i++){ //imgListObj.length songNodeWeb[i]=(HashMap<?,?>)imgListObj[i]; String nodeid=(String) songNodeWeb[i].get("nid"); break; Log.e("img",i+"completed"); HashMap<String,String> nData=new HashMap<String,String>(); nData.put("nid",nodeid); Object nodeget=client.call("node.get",logInSess,nodeid); HashMap<?,?> imgNode=(HashMap<?,?>)nodeget; String titleName=(String) imgNode.get("titles"); String movieName=(String) imgNode.get("album"); String singerName=(String) imgNode.get("artist"); nData.put("titles", titleName); nData.put("album", movieName); nData.put("artist", singerName); Object[] imgObject=(Object[])imgNode.get("field_image"); HashMap<?,?>[] imgDetails=new HashMap<?,?>[imgObject.length]; imgDetails[0]=(HashMap<?, ?>)imgObject[0]; String path=(String) imgDetails[0].get("filepath"); if(path.contains(" ")){ path=path.replace(" ", "%20"); } String imgPath="http://www.gorinka.com/"+path; paths.add(imgPath); nData.put("path", imgPath); Log.e("my path",path); String mime=(String)imgDetails[0].get("filemime"); nData.put("mime", mime); SongsList songs=new SongsList(titleName,movieName,singerName,imgPath,imgPath); SngList.add(i,songs); songNodeDet.add(i,nData); } Log.e("paths values",paths.toString()); // return imgNodeDet; handler.sendEmptyMessage(0); } } public void getSongs() throws MalformedURLException, XMLRPCException { String ur="http://www.gorinka.com/?q=services/xmlrpc"; URL u=new URL(ur); client = new XMLRPCClient(u); //Connecting to the website HashMap<?, ?> siteConn =(HashMap<?, ?>) client.call("system.connect"); // Getting initial sessio id String initSess=(String)siteConn.get("sessid"); //Login to the site using session id HashMap<?, ?> logInConn =(HashMap<?, ?>) client.call("user.login",initSess,"prakash","stellentsoft2009"); //Getting Login sessid logInSess=(String)logInConn.get("sessid"); websongListObject =(Object[]) client.call("nodetype.get",logInSess,""); webObjectList(websongListObject,logInSess); Log.d("webObjectList","webObjectList"); runOnUiThread(returnRes); } } Here's the Adapter associated... public class SongsAdapter extends SimpleAdapter{ static List<HashMap<String,String>> songsList; Context context; LayoutInflater inflater; public SongsAdapter(Context context,List<HashMap<String,String>> imgListWeb,int layout,String[] from,int[] to,LayoutInflater inflater) { super(context,songsList,layout,from,to); this.songsList=songsList; this.context=context; this.inflater=inflater; // TODO Auto-generated constructor stub } @Override public View getView(int postition,View convertView,ViewGroup parent)throws java.lang.OutOfMemoryError{ try { View v = ((LayoutInflater) inflater).inflate(R.layout.row,null); ImageView images=(ImageView)v.findViewById(R.id.image); TextView tvTitle=(TextView)v.findViewById(R.id.text1); TextView tvAlbum=(TextView)v.findViewById(R.id.text2); TextView tvArtist=(TextView)v.findViewById(R.id.text3); HashMap<String,String> songsHash=songsList.get(postition); String path=songsHash.get("path"); String title=songsHash.get("title"); String album=songsHash.get("album"); String artist=songsHash.get("artist"); String imgPath=path; final ImageView imageView = (ImageView) v.findViewById(R.id.image); AsyncImageLoaderv asyncImageLoader=new AsyncImageLoaderv(); Bitmap cachedImage = asyncImageLoader.loadDrawable(imgPath, new AsyncImageLoaderv.ImageCallback() { public void imageLoaded(Bitmap imageDrawable, String imageUrl) { imageView.setImageBitmap(imageDrawable); } }); imageView.setImageBitmap(cachedImage); tvTitle.setText(title); tvAlbum.setText(album); tvArtist.setText(artist); return v; } catch(Exception e){ Log.e("error",e.toString()); } return null; } public static Bitmap loadImageFromUrl(String url) { InputStream inputStream;Bitmap b; try { inputStream = (InputStream) new URL(url).getContent(); BitmapFactory.Options bpo= new BitmapFactory.Options(); bpo.inSampleSize=2; b=BitmapFactory.decodeStream(inputStream, null,bpo ); return b; } catch (IOException e) { throw new RuntimeException(e); } } } Here is what logcat is showing... 04-23 16:02:02.211: ERROR/completed(1450): completed 04-23 16:02:02.211: ERROR/paths values(1450): [] 04-23 16:02:02.211: DEBUG/*****(1450): handler 04-23 16:02:02.211: DEBUG/AndroidRuntime(1450): Shutting down VM 04-23 16:02:02.211: WARN/dalvikvm(1450): threadid=3: thread exiting with uncaught exception (group=0x4001aa28) 04-23 16:02:02.222: ERROR/AndroidRuntime(1450): Uncaught handler: thread main exiting due to uncaught exception 04-23 16:02:02.241: DEBUG/webObjectList(1450): webObjectList 04-23 16:02:02.252: ERROR/AndroidRuntime(1450): java.lang.NullPointerException 04-23 16:02:02.252: ERROR/AndroidRuntime(1450): at com.stellent.gorinka.MusicListActivity$2.handleMessage(MusicListActivity.java:81) 04-23 16:02:02.252: ERROR/AndroidRuntime(1450): at android.os.Handler.dispatchMessage(Handler.java:99) 04-23 16:02:02.252: ERROR/AndroidRuntime(1450): at android.os.Looper.loop(Looper.java:123) 04-23 16:02:02.252: ERROR/AndroidRuntime(1450): at android.app.ActivityThread.main(ActivityThread.java:4203) 04-23 16:02:02.252: ERROR/AndroidRuntime(1450): at java.lang.reflect.Method.invokeNative(Native Method) 04-23 16:02:02.252: ERROR/AndroidRuntime(1450): at java.lang.reflect.Method.invoke(Method.java:521) 04-23 16:02:02.252: ERROR/AndroidRuntime(1450): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:791) 04-23 16:02:02.252: ERROR/AndroidRuntime(1450): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:549) 04-23 16:02:02.252: ERROR/AndroidRuntime(1450): at dalvik.system.NativeStart.main(Native Method) I have declared the getter and setter methods in a seperate claa named SongsList. Plz help me determine the problem...

  Read the article

• Slow wifi from Windows Server 2003 virtualized in XenServer

  - by John Clayton

  I'm a brand spanking new user of OS X, coming from a lifetime of Windows use. I've been setting up my new Macbook Pro and have run into a very unusual problem. Over wifi, I am unable to copy files to or from my Windows Home Server. The problem seems to exist only over wifi, and only to WHS. Here are the details of my setup: 2010 Macbook Pro (Core i7), OS X 10.6.3 Windows Home Server PP3 (virtualized in XenServer 5.5) Windows 7 Ultimate x64 desktop Windows 7 Ultimate x64 in Boot Camp D-Link DIR-655 wireless N router Here is what I've done to narrow down the problem: Files copy fine from WHS to OS X when using gigabit ethernet Files copy fine from desktop to OS X when using gigabit ethernet Files fail to copy from WHS to OS X when using wifi (error -51) Files copy fine from desktop to OS X when using wifi Files copy fine from WHS to Boot Camp when using wifi Files copy fine from desktop to Boot Camp when using wifi From what I can tell, it seems to be some sort of issue between OS X and WHS, but I can't for the life of me see what would be different between shares on WHS and my desktop. They are both connected using smb://ADDRESS (I've tried both by IP and name). I can browse the shares on the WHS, but copying to OS X fails. I originally found the issue while installing VS2010 off an ISO from WHS, mounted to a Windows 7 VM using VMware Fusion. During the installation the VM was unusable - even the clock got behind the host be about 8 minutes. Once I plugged in the ethernet and disabled the wifi things picked up and finished quickly. The Fusion 3.1 RC is the only I think of that I installed that may have messed with the wifi driver. I've also tried resetting the wifi router, and have changed it from being G & N to N-only. Under Boot Camp I get similar speeds as my wife's N laptop. Any ideas? Thanks! Update: The issue has been further narrowed down to Windows Server 2003, which Windows Home Server is based on, running in XenServer with the XenServer tools installed.

  Read the article

• Why won't vyatta allow SMTP through my firewall?

  - by Solignis

  I am setting up a vyatta router on VMware ESXi, But I see to have hit a major snag, I could not get my firewall and NAT to work correctly. I am not sure what was wrong with NAT but it "seems" to be working now. But the firewall is not allowing traffic from my WAN interface (eth0) to my LAN (eth1). I can confirm its the firewall because I disabled all firewall rules and everything worked with just NAT. If put the firewalls (WAN and LAN) back in place nothing can get through to port 25. I am not really sure what the issue could be I am using pretty basic firewall rules, I wrote the rules while looking at the vyatta docs so unless there is something odd with the documentation they "should" be working. Here is my NAT rules so far; vyatta@gateway# show service nat rule 20 { description "Zimbra SNAT #1" outbound-interface eth0 outside-address { address 74.XXX.XXX.XXX } source { address 10.0.0.17 } type source } rule 21 { description "Zimbra SMTP #1" destination { address 74.XXX.XXX.XXX port 25 } inbound-interface eth0 inside-address { address 10.0.0.17 } protocol tcp type destination } rule 100 { description "Default LAN -> WAN" outbound-interface eth0 outside-address { address 74.XXX.XXX.XXX } source { address 10.0.0.0/24 } type source } Then here is my firewall rules, this is where I believe the problem is. vyatta@gateway# show firewall all-ping enable broadcast-ping disable conntrack-expect-table-size 4096 conntrack-hash-size 4096 conntrack-table-size 32768 conntrack-tcp-loose enable ipv6-receive-redirects disable ipv6-src-route disable ip-src-route disable log-martians enable name LAN_in { rule 100 { action accept description "Default LAN -> any" protocol all source { address 10.0.0.0/24 } } } name LAN_out { } name LOCAL { rule 100 { action accept state { established enable } } } name WAN_in { rule 20 { action accept description "Allow SMTP connections to MX01" destination { address 74.XXX.XXX.XXX port 25 } protocol tcp } rule 100 { action accept description "Allow established connections back through" state { established enable } } } name WAN_out { } receive-redirects disable send-redirects enable source-validation disable syn-cookies enable SIDENOTE To test for open ports I have using this website, http://www.yougetsignal.com/tools/open-ports/, it showed port 25 as open without the firewall rules and closed with the firewall rules. UPDATE Just to see if the firewall was working properly I made a rule to block SSH from the WAN interface. When I checked for port 22 on my primary WAN address it said it was still open even though I outright blocked the port. Here is the rule I used; rule 21 { action reject destination { address 74.219.80.163 port 22 } protocol tcp } So now I am convinced either I am doing something wrong or the firewall is not working like it should.

  Read the article

• Hyper-V Machine drifts time all over, even with NTP

  - by MichaelGG

  Resolved The problem was Hyper-V on that machine. I removed Hyper-V, installed VMware Server, ran the same VM. Time sync issues went away (< 100ms difference after a day). My setup is like this: HYV1 - HyperV machine (non domain) - sync irrelevant AD1 - VM AD server on HYV1, sync'd to time.nist.gov. HyperV time sync off. S1 - Physical machine, sync'd to domain. S2 - Physical machine running HyperV, sync'd to domain. V1 - Linux VM machine on S2, sync'd to AD1. No HyperV integration. AD1 and S1 have fine sync -- stripchart shows less than 100ms difference. S2 drifts like crazy. Here's a bit of the stripchart against AD1: 18:33:22 d:+00.0010138s o:+05.4101899s 18:33:24 d:+00.0010138s o:+05.4319765s 18:33:26 d:+00.0000000s o:+05.4788429s 18:33:28 d:+00.0000000s o:+05.6089942s 18:33:30 d:+00.0010138s o:+05.7240269s 18:33:32 d:+00.0000000s o:+06.0421911s 18:33:34 d:+00.0081104s o:+06.5613708s 18:33:37 d:+00.0000000s o:+06.9096594s 18:33:39 d:+00.0000000s o:+06.8867838s 18:33:41 d:+00.0010127s o:+06.8936401s In 20 seconds, it drifted over a second. If I manually reset it to within 1s, within a few minutes it'll be back drifting about 2 seconds. Overnight it went from ~2s to ~5s. The Linux VM inside S2 has perfect sync with AD1. Here's the config: C:\Users\mgg>w32tm /dumpreg /subkey:Parameters Value Name Value Type Value Data ------------------------------------------------------------ ServiceDll REG_EXPAND_SZ %systemroot%\system32\w32time.dll ServiceMain REG_SZ SvchostEntry_W32Time ServiceDllUnloadOnStop REG_DWORD 1 Type REG_SZ NT5DS NtpServer REG_SZ ad01.mydomain ad02.mydomain C:\Users\mgg>w32tm /dumpreg /subkey:Config Value Name Value Type Value Data ----------------------------------------------------------- FrequencyCorrectRate REG_DWORD 4 PollAdjustFactor REG_DWORD 5 LargePhaseOffset REG_DWORD 50000000 SpikeWatchPeriod REG_DWORD 900 LocalClockDispersion REG_DWORD 9 HoldPeriod REG_DWORD 5 PhaseCorrectRate REG_DWORD 1 UpdateInterval REG_DWORD 30000 EventLogFlags REG_DWORD 2 AnnounceFlags REG_DWORD 5 TimeJumpAuditOffset REG_DWORD 28800 MinPollInterval REG_DWORD 2 MaxPollInterval REG_DWORD 8 MaxNegPhaseCorrection REG_DWORD -1 MaxPosPhaseCorrection REG_DWORD -1 MaxAllowedPhaseOffset REG_DWORD 300 I looked at the event log, and apart from warnings about sync (after it gets way out of sync), there's no other warnings. How can I go about troubleshooting this? It's the only machine that is having this problem. All the other machines (physical and virtual) are doing fine. Edit: To clarify: The VM (AD1) has integration turned off and syncs to time.nist.gov. AD1 is fine. It's the physical machine S1 that can't sync to AD1 and drifts all over. All the other physical servers are able to sync to AD1 just fine. Update So, it appears to be an issue of running the VM. The clock slips slowly with the VM off. Turned on, it immediately starts losing seconds. I swt the VM to only use half the resources, and that seems to have slightly mitigated it, for now. Thanks!

  Read the article

• Further Performance Tuning on Medium SharePoint Farm?

  - by elorg

  I figured I would post this here, since it may be related more to the server configuration than the SharePoint configuration or a combination of both? I'm open for ideas to try, or even feedback on things that maybe have been configured incorrectly as far as performance is concerned. We have a medium MOSS 2007 install prepped and ready for receiving the WSS 2003 data to upgrade. The environment was originally architected by a previous coworker, and I have since added a few configuration modifications to assist with performance before we finally performed the install. When testing the new site collections & SharePoint install (no actual data yet), things seemed a bit slow. I had assumed that it was because I was accessing it remotely. Apparently the client is still experiencing this and it is unacceptably slow. 1 SQL Server running SQL Server 2008 2x SharePoint WFEs - hosting queries (no index) 1x SharePoint Index - hosting index (no queries) MOSS 2007 installed and patched up through December '09 on WFEs & Index All 4 servers are VMs, should have more than sufficient disk space & RAM (don't recall at the moment), and are running Windows Server 2008 - everything is 64-bit. The WFEs have Windows NLB configured, with a DNS name & IP for the NLB cluster. Single NIC on each server (virtual, since VMWare). The Index server is configured as a WFE (outside of the NLB cluster) so that it can index itself and replicate the indexes to the WFEs that will serve the queries. Everything is configured & working properly - it just takes a minute or two to load a page on the local LAN. The client is still using their old portal (we haven't started the migration/upgrade just yet) so there's virtually no data or users. We need to either further tune the configuration, or fix anything that may have been configured incorrectly which is causing this slowness? I've already reviewed & taken into account everything that I could find that was relevant before we even started the install. Does anyone have ideas or pointers? Perhaps there's something that I've missed?

  Read the article

• Retrieving saved checkboxes' name and values from database

  - by sermed

  I have a form with checkboxes, each one has a value. When the registered user select any checkbox the value is incremented (the summation) and then then registred user save his selection of checkbox if he satisfied with the result of summation into database all this work fine ...i want to enable the registred user to view his selection history by retriving and displaying the checkboxes he selected in a page with thier values ... How I can do that? I'm just able to save the selected checkboxes as choice 1, choice 2, for example .. I want to view the selected checkboxes that is saved in database as the appear in the page when the user first select them: for example if the registred user selects these 3 options LEAD DEEP KEEL (1825) FULLY BATTENED MAINSAIL (558) TEAK SIDE DECKS (2889) They will be saved as for example (choice1, choice2, choice3). But if he want to view selected checkboxes the appear exactly as first he selects them: LEAD DEEP KEEL (1825) FULLY BATTENED MAINSAIL (558) TEAK SIDE DECKS (2889) This is my user table: $query="CREATE TABLE User( user_id varchar(20), password varchar(40), user_type varchar(20), firstname varchar(30), lastname varchar(30), street varchar(50), city varchar(50), county varchar(50), post_code varchar(10), country varchar(50), gender varchar(6), dob varchar(15), tel_no varchar(50), vals varchar(50), email varchar(50))"; and the code to inser the options selected to database <?php include("databaseconnection.php"); $str = ''; foreach($_POST as $key => $val) if (strpos($key,'choice') !== false) $str .= $key.','; $query = "INSERT INTO User (vals) VALUES('$str')"; $result=mysql_query($query,$conn); if ($result) { (mysql_error(); } else { echo " done"; } ?> And this is my form: function checkTotal() { document.listForm.total.value = ''; var sum = 0; for (i=0;i <form name="listForm" method="post" action="insert_options.php" > <TABLE cellPadding=3 width=600 border=0> <TBODY> <TR> <TH align=left width="87%" bgColor=#b0b3b4><SPAN class=whiteText>Item</SPAN></TH> <TH align=right width="13%" bgColor=#b0b3b4><SPAN class=whiteText>Select</SPAN></TH></TR> <TR> <TD bgcolor="#9da8af"colSpan=2><SPAN class=normalText><B>General</B></SPAN></TD></TR> <TR> <TD bgcolor="#c4c8ca"><SPAN class=normalText >TEAK SIDE DECKS (2889)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="2889" type="checkbox" onchange="checkTotal()" /></TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>LEAD DEEP KEEL (1825)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="1825" type="checkbox" onchange="checkTotal()"></TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>FULLY BATTENED MAINSAIL (558)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="558" type="checkbox" onchange="checkTotal()"></TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>HIGH TECH SAILS FOR CONVENTIONAL RIG (1979)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="1979" type="checkbox" onchange="checkTotal()"></TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>IN MAST REEFING WITH HIGH TECH SAILS (2539)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="2539" type="checkbox" onchange="checkTotal()"></TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>SPlNNAKER GEAR (POLE LINES DECK FITTINGS) (820)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="820" type="checkbox" onchange="checkTotal()"></TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>SPINNAKER POLE VERTICAL STOWAGE SYSTEM (214)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="214" type="checkbox" onchange="checkTotal()"></TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>GAS ROD KICKER (208)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="208" type="checkbox" onchange="checkTotal()"></TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>SIDE RAIL OPENINGS (BOTH SIDES) (392)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="392" type="checkbox" onchange="checkTotal()"></TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>SPRING CLEATS MIDSHIPS -ALUMIMIUM (148)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="148" type="checkbox" onchange="checkTotal()"></TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>ELECTRIC ANCHOR WINDLASS (1189)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="1189" type="checkbox" onchange="checkTotal()"> </TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>ANCHOR CHAIN GALVANISED (50m) (202)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="202" type="checkbox" onchange="checkTotal()"> </TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>ANCHOR CHAIN GALVANISED (50m) (1141)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="1141" type="checkbox" onchange="checkTotal()"></TD></TR> <TR> <TD bgcolor="#9da8af"colSpan=2><SPAN class=normalText><B>NAVIGATION & ELECTRONICS</B></SPAN></TD></TR> <TR> <TD bgcolor="#c4c8ca"><SPAN class=normalText >WIND VANE (STAINLESS STEEL)(41)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="41" type="checkbox" onchange="checkTotal()" /></TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>RAYMARINE ST6O LOG & DEPTH (SEPARATE UNITS)(226)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="226" type="checkbox" onchange="checkTotal()"></TD></TR> <TR> <TD bgcolor="#9da8af"colSpan=2><SPAN class=normalText><B>ENGINES & ELECTRICS</B></SPAN></TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>SHORE SUPPLY (220V) WITH 3 OUTLETS (EXCLUDJNG SHORE CABLE) (327)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="327" type="checkbox" onchange="checkTotal()"></TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>3rd BATTERY(14OA/H)(196)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="196" type="checkbox" onchange="checkTotal()"></TD></TR> <TD bgColor=#c4c8ca><SPAN class=normalText>24 AMP BATTERY CHARGER (475)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="475" type="checkbox" onchange="checkTotal()"></TD></TR> <TD bgColor=#c4c8ca><SPAN class=normalText>2 BLADED FOLDING PROPELLER (UPGRADE)(299)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="299" type="checkbox" onchange="checkTotal()"></TD></TR> <TR> <TD bgcolor="#9da8af"colSpan=2><SPAN class=normalText><B>BELOW DECKS/DOMESTIC</B></SPAN></TD></TR> <TD bgColor=#c4c8ca><SPAN class=normalText>WARM WATER (FROM ENGINE & 220V)(749)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="749" type="checkbox" onchange="checkTotal()"></TD></TR> <TD bgColor=#c4c8ca><SPAN class=normalText>SHOWER IN AFT HEADS WITH PUMPOUT(446)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="446" type="checkbox" onchange="checkTotal()"></TD></TR> <TD bgColor=#c4c8ca><SPAN class=normalText>DECK SUCTION DISPOSAL FOR HOLDINGTANK(166)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="166" type="checkbox" onchange="checkTotal()"></TD></TR> <TD bgColor=#c4c8ca><SPAN class=normalText>REFRIGERATED COOLBOX (12V)(666)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="666" type="checkbox" onchange="checkTotal()"></TD></TR> <TD bgColor=#c4c8ca><SPAN class=normalText>LFS SAFETY PACKAGE (COCKPIT HARNESS POINTS STAINLESS STEEL JACKSTAYS)(208)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="208" type="checkbox" onchange="checkTotal()"></TD></TR> <TD bgColor=#c4c8ca><SPAN class=normalText>UPHOLSTERY UPGRADE IN SALOON (SUEDETYPE)(701)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="701" type="checkbox" onchange="checkTotal()"></TD></TR> <TR> <TD bgcolor="#9da8af"colSpan=2><SPAN class=normalText><B>NAVIGATION ELECTRONICS & ELECTRICS</B></SPAN></TD></TR> <TD bgColor=#c4c8ca><SPAN class=normalText>VHF RADIO AERIAL CABLED TO NAVIGATION AREA(178)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="178" type="checkbox" onchange="checkTotal()"></TD></TR> </table>

  Read the article

• Baseline / Benchmark Physical and virtual server performance

  - by EyeonTech

  I am setting up a new server and there are some options. I want to perform some benchmarks and I need your help in determining the best tools and if possible run pre-configured benchmarks designed for SQL servers on Windows Server 2008/2012. Step 1. Run a performance monitor on the current Live SQL server (Windows Server 2008 Virtual machine running on ESXi. New server Hardware rundown: Intel® Server System R1304BTLSHBN - 1U Rack, LGA1155 http://ark.intel.com/products/53559/Intel-Server-System-R1304BTLSHBN Intel Xeon E3-1270V2 2x Intel SSD 330 Series 240GB 2.5in SATA 6Gb/s 25nm 1x WD 2TB WD2002FAEX 2TB 64M SATA3 CAVIAR BLACK 4x 8GB 1333MHz DDR3 ECC CL9 DIMM There are several options for configurations and I want to benchmark some of them and share the results. Option 1. Configure 2x SSDs at RAID 0. Install Windows Server 2008 directly to the 2TB WD Caviar HDD. Store Database files on the RAID 0 Volume. Benchmark the OS direct on the hardware as an SQL Server. Store SQL Backup databases on the 2TB WD Caviar HDD. Option 2. Configure 2x SSDs at RAID 0. Install Windows Server 2012 directly to the 2TB WD Caviar HDD. Install Hyper-V. Install the SQL Server (Server 2008) as a virtual machine. Store the Virtual Hard Disks on the SSDs. Option 3. Configure 2x SSDs at RAID 0. Install VMWare ESXi on a partition of the 2TB WD Caviar HDD. Install the SQL Server (Server 2008) as a virtual machine. Store the Virtual Hard Disks on the SSDs. I have a few tools in mind from http://technet.microsoft.com/en-us/library/cc768530(v=bts.10).aspx. Any tools with pre-configured test would be fantastic. Specifically if there are pre-configured perfmon sets avaliable. Any opinions on the setup to gain the best results is welcome. Thanks in advance.

  Read the article

• Is it possible to "stealth" dual boot a machine?

  - by BrianH

  I have a loaner laptop that has MS Windows with locked down permissions. It works okay for what I need to do, but I started wondering if there was a way to install a separate Windows OS on a separate hard drive to do what I want to do on it. Virtual I wish I could use VirtualBox or VMWare, but that is not an option (I even tried VBox portable). External Drive My next trial was see if it was possible to install Windows on an external drive, and then plug that drive in and boot from it whenever I wanted my own OS. After a few Google searches, I see that is not really a possibility. Swap Primary Drive Another option, would be to get a second internal hard drive, take the existing HD out, and install a new Windows OS on the secondary HD. This would mean swapping the internal hard drive each time I want to switch OSs - doable, but not very convenient. Dual Boot The laptop has an expansion slot where a second hard drive can be plugged in quickly. I thought about Dual booting, but I don't want to mess with the MBR on the primary hard drive. When I have to give the laptop back, I don't want a dual-boot screen to popup. Summary Is there a way to have 2 hard-drives on a machine, each with it's own OS, and maybe use BIOS settings to have only 1 hard drive active at a time? That way both hard drives could be physically connected, but only one would actually be active at a time. I basically want a second OS that does not (can not) affect the existing OS in any way, and can be removed at any time without affecting the existing OS. The secondary OS does not need any of the files on the main hard drive - it's basically like having 2 separate computers using the same hard ware... Is this possible, or would it be easier just to go out and buy a different laptop? Thanks in advance! EDIT I just discovered that my BIOS allows me to pick (at startup) which hard drive I want to boot from. I poked around in the BIOS and there is not a place to disable certain devices, like the primary hard drive. My only concern about plugging in a second hard drive and installing Windows to the second hard drive is that it will mess with the primary hard drive, or add a bootloader screen to pick which windows install to use. My thought would be to physically unplug the primary, plug in the secondary and install windows to the secondary. After the install is working properly, I can plug the primary back in and use the BIOS feature to determine which drive to boot to. Is there any way after I have 2 separate installs on 2 separate hard drives that one of the installs could mess with the MBR on the other drive?

  Read the article

• How to Configure Source NAT (Private IP => Public IP Outbound)

  - by DavidScherer

  I'm running VMWare ESXi Free and have Zentyal SBS 3.2 running as a Gateway. I have 5 Public IPS (CIDR/29, let's call them 69.1.1.1 - 69.1.1.5) and currently Zentyal is bound to 69.1.1.1 as the Gateway, with the other 4 Public IPs set as Virtual Interfaces in Zentyal (wan2-wan5) I have machines sitting on the Private Network (10.34.251.x) that, when going Outbound (to Google for instance) should be seen by the Internet as an IP other than the Gateway (69.1.1.1), this is because our machines need to be able to communicate with 3rd party APIs that expect these requests to come from a specific IP. From what I could find, SNAT (Source NAT) in Zentyal is used to achieve this, but I'm not sure how to configure it and cannot find a specific piece of Documentation for it at Zentyal. I've tried setting this up a couple different ways, with no results and at this point I have no idea if I'm going about this completely wrong, or my lack of experience with networking and the associated terminology is preventing me from placing the correct values in the correct fields. I get the following form to set up "SNAT" rules in Zentyal: Perhaps someone can offer some guidance and definitions for the fields above? SNAT Address Is this the Public IP I want to masquerade? Outgoing Interface Should this by my External NIC (one connected to Public 'Net), or is it the "Private" interface? It sounds as though this should be the External interface as I want the traffic from the internal network sent Out over this Interface (using a different IP than normal, anyway) Source Is the the Source on the internal network (one of the private IPs?), a public IP I want to masquerade as, or something else entirely? Destination Is this a place on the Internet (eg, "Only do this for the Site Google.com"/IP) or am I allowing myself to become confused again? Service I'm assuming this allows me to restrict which services this rule will apply to, but is it for a service on the internal network or a service being accessed on the external network? If I can offer any further details or information to make what I'm trying to do more clear, I will happily do so. Honestly any kind of help here would be very appreciated. I'm not a NetOps or anything even close, I spend most of my day writing code and my entire "team" at this company consists of "me, myself, and I" so while I try to broaden my KB at every possible opportunity, I can only learn so much, so fast and I feel like with networking especially there's just so much, coupled with a learning curve for each solution that likes to (from my limited perspective) use slightly different terminology that what I'm used to (and I don't exactly have the necessary experience to cross reference this stuff with the stuff I already know in context).

  Read the article

• Silverlight MVVM Confusion: Updating Image Based on State

  - by senfo

  I'm developing a Silverlight application and I'm trying to stick to the MVVM principals, but I'm running into some problems changing the source of an image based on the state of a property in the ViewModel. For all intents and purposes, you can think of the functionality I'm implementing as a play/pause button for an audio app. When in the "Play" mode, IsActive is true in the ViewModel and the "Pause.png" image on the button should be displayed. When paused, IsActive is false in the ViewModel and "Play.png" is displayed on the button. Naturally, there are two additional images to handle when the mouse hovers over the button. I thought I could use a Style Trigger, but apparently they're not supported in Silverlight. I've been reviewing a forum post with a question similar to mine where it's suggested to use the VisualStateManager. While this might help with changing the image for hover/normal states, the part missing (or I'm not understanding) is how this would work with a state set via the view model. The post seems to apply only to events rather than properties of the view model. Having said that, I also haven't successfully completed the normal/hover affects, either. Below is my Silverlight 4 XAML. It should also probably be noted I'm working with MVVM Light. <UserControl x:Class="Foo.Bar.MyUserControl" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:i="clr-namespace:System.Windows.Interactivity;assembly=System.Windows.Interactivity" mc:Ignorable="d" d:DesignHeight="100" d:DesignWidth="200"> <UserControl.Resources> <Style x:Key="MyButtonStyle" TargetType="Button"> <Setter Property="IsEnabled" Value="true"/> <Setter Property="IsTabStop" Value="true"/> <Setter Property="Background" Value="#FFA9A9A9"/> <Setter Property="Foreground" Value="#FF000000"/> <Setter Property="MinWidth" Value="5"/> <Setter Property="MinHeight" Value="5"/> <Setter Property="Margin" Value="0"/> <Setter Property="HorizontalAlignment" Value="Left" /> <Setter Property="HorizontalContentAlignment" Value="Center"/> <Setter Property="VerticalAlignment" Value="Top" /> <Setter Property="VerticalContentAlignment" Value="Center"/> <Setter Property="Cursor" Value="Hand"/> <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="Button"> <Grid> <Image Source="/Foo.Bar;component/Resources/Icons/Bar/Play.png"> <VisualStateManager.VisualStateGroups> <VisualStateGroup x:Name="Active"> <VisualState x:Name="MouseOver"> <Storyboard> <ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="Source" Storyboard.TargetName="/Foo.Bar;component/Resources/Icons/Bar/Play_Hover.png" /> </Storyboard> </VisualState> </VisualStateGroup> </VisualStateManager.VisualStateGroups> </Image> </Grid> </ControlTemplate> </Setter.Value> </Setter> </Style> </UserControl.Resources> <Grid x:Name="LayoutRoot" Background="White"> <Button Style="{StaticResource MyButtonStyle}" Command="{Binding ChangeStatus}" Height="30" Width="30" /> </Grid> </UserControl> What is the proper way to update images on buttons with the state determined by the view model? Update I changed my Button to a ToggleButton hoping I could use the Checked state to differentiate between play/pause. I practically have it, but I ran into one additional problem. I need to account for two states at the same time. For example, Checked Normal/Hover and Unchecked Normal/Hover. Following is my updated XAML: <UserControl x:Class="Foo.Bar.MyUserControl" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:i="clr-namespace:System.Windows.Interactivity;assembly=System.Windows.Interactivity" mc:Ignorable="d" d:DesignHeight="100" d:DesignWidth="200"> <UserControl.Resources> <Style x:Key="MyButtonStyle" TargetType="ToggleButton"> <Setter Property="IsEnabled" Value="true"/> <Setter Property="IsTabStop" Value="true"/> <Setter Property="Background" Value="#FFA9A9A9"/> <Setter Property="Foreground" Value="#FF000000"/> <Setter Property="MinWidth" Value="5"/> <Setter Property="MinHeight" Value="5"/> <Setter Property="Margin" Value="0"/> <Setter Property="HorizontalAlignment" Value="Left" /> <Setter Property="HorizontalContentAlignment" Value="Center"/> <Setter Property="VerticalAlignment" Value="Top" /> <Setter Property="VerticalContentAlignment" Value="Center"/> <Setter Property="Cursor" Value="Hand"/> <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="ToggleButton"> <Grid> <VisualStateManager.VisualStateGroups> <VisualStateGroup x:Name="CommonStates"> <VisualState x:Name="Normal"> <Storyboard> <ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="(UIElement.Visibility)" Storyboard.TargetName="Pause"> <DiscreteObjectKeyFrame KeyTime="0"> <DiscreteObjectKeyFrame.Value> <Visibility>Collapsed</Visibility> </DiscreteObjectKeyFrame.Value> </DiscreteObjectKeyFrame> </ObjectAnimationUsingKeyFrames> </Storyboard> </VisualState> <VisualState x:Name="MouseOver"> <Storyboard> <ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="(UIElement.Visibility)" Storyboard.TargetName="PlayHover"> <DiscreteObjectKeyFrame KeyTime="0"> <DiscreteObjectKeyFrame.Value> <Visibility>Visible</Visibility> </DiscreteObjectKeyFrame.Value> </DiscreteObjectKeyFrame> </ObjectAnimationUsingKeyFrames> <ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="(UIElement.Visibility)" Storyboard.TargetName="Play"> <DiscreteObjectKeyFrame KeyTime="0"> <DiscreteObjectKeyFrame.Value> <Visibility>Collapsed</Visibility> </DiscreteObjectKeyFrame.Value> </DiscreteObjectKeyFrame> </ObjectAnimationUsingKeyFrames> </Storyboard> </VisualState> </VisualStateGroup> <VisualStateGroup x:Name="CheckStates"> <VisualState x:Name="Checked"> <Storyboard> <ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="(UIElement.Visibility)" Storyboard.TargetName="Pause"> <DiscreteObjectKeyFrame KeyTime="0"> <DiscreteObjectKeyFrame.Value> <Visibility>Visible</Visibility> </DiscreteObjectKeyFrame.Value> </DiscreteObjectKeyFrame> </ObjectAnimationUsingKeyFrames> <ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="(UIElement.Visibility)" Storyboard.TargetName="Play"> <DiscreteObjectKeyFrame KeyTime="0"> <DiscreteObjectKeyFrame.Value> <Visibility>Collapsed</Visibility> </DiscreteObjectKeyFrame.Value> </DiscreteObjectKeyFrame> </ObjectAnimationUsingKeyFrames> <ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="(UIElement.Visibility)" Storyboard.TargetName="PlayHover"> <DiscreteObjectKeyFrame KeyTime="0"> <DiscreteObjectKeyFrame.Value> <Visibility>Collapsed</Visibility> </DiscreteObjectKeyFrame.Value> </DiscreteObjectKeyFrame> </ObjectAnimationUsingKeyFrames> </Storyboard> </VisualState> <VisualState x:Name="Unchecked" /> </VisualStateGroup> </VisualStateManager.VisualStateGroups> <Image x:Name="Play" Source="/Foo.Bar;component/Resources/Icons/Bar/Play.png" /> <Image x:Name="Pause" Source="/Foo.Bar;component/Resources/Icons/Bar/Pause.png" Visibility="Collapsed" /> <Image x:Name="PlayHover" Source="/Foo.Bar;component/Resources/Icons/Bar/Play_Hover.png" Visibility="Collapsed" /> <Image x:Name="PauseHover" Source="/Foo.Bar;component/Resources/Icons/Bar/Pause_Hover.png" Visibility="Collapsed" /> </Grid> </ControlTemplate> </Setter.Value> </Setter> </Style> </UserControl.Resources> <Grid x:Name="LayoutRoot" Background="White"> <ToggleButton Style="{StaticResource MyButtonStyle}" IsChecked="{Binding IsPlaying}" Command="{Binding ChangeStatus}" Height="30" Width="30" /> </Grid> </UserControl>

  Read the article

• How to Make a Game like Space Invaders - Ray Wenderlich (why do my space invaders scroll off screen)

  - by Erv Noel

  I'm following this tutorial(http://www.raywenderlich.com/51068/how-to-make-a-game-like-space-invaders-with-sprite-kit-tutorial-part-1) and I've run into a problem right after the part where I add [self determineInvaderMovementDirection]; to my GameScene.m file (specifically to my moveInvadersForUpdate method) The tutorial states that the space invaders should be moving accordingly after adding this piece of code but when I run they move to the left and they do not come back. I'm not sure what I am doing wrong as I have followed this tutorial very carefully. Any help or clarification would be greatly appreciated. Thanks in advance ! Here is the full GameScene.m #import "GameScene.h" #import <CoreMotion/CoreMotion.h> #pragma mark - Custom Type Definitions /* The type definition and constant definitions 1,2,3 take care of the following tasks: 1.Define the possible types of invader enemies. This can be used in switch statements later when things like displaying different sprites images for each enemy type. The typedef makes InvaderType a formal Obj-C type that is type checked for method arguments and variables.This is so that the wrong method argument is not used or assigned to the wrong variable. 2. Define the size of the invaders and that they'll be laid out in a grid of rows and columns on the screen. 3. Define a name that will be used to identify invaders when searching for them. */ //1 typedef enum InvaderType { InvaderTypeA, InvaderTypeB, InvaderTypeC } InvaderType; /* Invaders move in a fixed pattern: right, right, down, left, down, right right. InvaderMovementDirection tracks the invaders' progress through this pattern */ typedef enum InvaderMovementDirection { InvaderMovementDirectionRight, InvaderMovementDirectionLeft, InvaderMovementDirectionDownThenRight, InvaderMovementDirectionDownThenLeft, InvaderMovementDirectionNone } InvaderMovementDirection; //2 #define kInvaderSize CGSizeMake(24,16) #define kInvaderGridSpacing CGSizeMake(12,12) #define kInvaderRowCount 6 #define kInvaderColCount 6 //3 #define kInvaderName @"invader" #define kShipSize CGSizeMake(30, 16) //stores the size of the ship #define kShipName @"ship" // stores the name of the ship stored on the sprite node #define kScoreHudName @"scoreHud" #define kHealthHudName @"healthHud" /* this class extension allows you to add “private” properties to GameScene class, without revealing the properties to other classes or code. You still get the benefit of using Objective-C properties, but your GameScene state is stored internally and can’t be modified by other external classes. As well, it doesn’t clutter the namespace of datatypes that your other classes see. This class extension is used in the method didMoveToView */ #pragma mark - Private GameScene Properties @interface GameScene () @property BOOL contentCreated; @property InvaderMovementDirection invaderMovementDirection; @property NSTimeInterval timeOfLastMove; @property NSTimeInterval timePerMove; @end @implementation GameScene #pragma mark Object Lifecycle Management #pragma mark - Scene Setup and Content Creation /*This method simply invokes createContent using the BOOL property contentCreated to make sure you don’t create your scene’s content more than once. This property is defined in an Objective-C Class Extension found near the top of the file()*/ - (void)didMoveToView:(SKView *)view { if (!self.contentCreated) { [self createContent]; self.contentCreated = YES; } } - (void)createContent { //1 - Invaders begin by moving to the right self.invaderMovementDirection = InvaderMovementDirectionRight; //2 - Invaders take 1 sec for each move. Each step left, right or down // takes 1 second. self.timePerMove = 1.0; //3 - Invaders haven't moved yet, so set the time to zero self.timeOfLastMove = 0.0; [self setupInvaders]; [self setupShip]; [self setupHud]; } /* Creates an invade sprite of a given type 1. Use the invadeType parameterr to determine color of the invader 2. Call spriteNodeWithColor:size: of SKSpriteNode to alloc and init a sprite that renders as a rect of the given color invaderColor with size kInvaderSize */ -(SKNode*)makeInvaderOfType:(InvaderType)invaderType { //1 SKColor* invaderColor; switch (invaderType) { case InvaderTypeA: invaderColor = [SKColor redColor]; break; case InvaderTypeB: invaderColor = [SKColor greenColor]; break; case InvaderTypeC: invaderColor = [SKColor blueColor]; break; } //2 SKSpriteNode* invader = [SKSpriteNode spriteNodeWithColor:invaderColor size:kInvaderSize]; invader.name = kInvaderName; return invader; } -(void)setupInvaders { //1 - loop over the rows CGPoint baseOrigin = CGPointMake(kInvaderSize.width / 2, 180); for (NSUInteger row = 0; row < kInvaderRowCount; ++row) { //2 - Choose a single InvaderType for all invaders // in this row based on the row number InvaderType invaderType; if (row % 3 == 0) invaderType = InvaderTypeA; else if (row % 3 == 1) invaderType = InvaderTypeB; else invaderType = InvaderTypeC; //3 - Does some math to figure out where the first invader // in the row should be positioned CGPoint invaderPosition = CGPointMake(baseOrigin.x, row * (kInvaderGridSpacing.height + kInvaderSize.height) + baseOrigin.y); //4 - Loop over the columns for (NSUInteger col = 0; col < kInvaderColCount; ++col) { //5 - Create an invader for the current row and column and add it // to the scene SKNode* invader = [self makeInvaderOfType:invaderType]; invader.position = invaderPosition; [self addChild:invader]; //6 - update the invaderPosition so that it's correct for the //next invader invaderPosition.x += kInvaderSize.width + kInvaderGridSpacing.width; } } } -(void)setupShip { //1 - creates ship using makeShip. makeShip can easily be used later // to create another ship (ex. to set up more lives) SKNode* ship = [self makeShip]; //2 - Places the ship on the screen. In SpriteKit the origin is at the lower //left corner of the screen. The anchorPoint is based on a unit square with (0, 0) at the lower left of the sprite's area and (1, 1) at its top right. Since SKSpriteNode has a default anchorPoint of (0.5, 0.5), i.e., its center, the ship's position is the position of its center. Positioning the ship at kShipSize.height/2.0f means that half of the ship's height will protrude below its position and half above. If you check the math, you'll see that the ship's bottom aligns exactly with the bottom of the scene. ship.position = CGPointMake(self.size.width / 2.0f, kShipSize.height/2.0f); [self addChild:ship]; } -(SKNode*)makeShip { SKNode* ship = [SKSpriteNode spriteNodeWithColor:[SKColor greenColor] size:kShipSize]; ship.name = kShipName; return ship; } -(void)setupHud { //Sets the score label font to Courier SKLabelNode* scoreLabel = [SKLabelNode labelNodeWithFontNamed:@"Courier"]; //1 - Give the score label a name so it becomes easy to find later when // the score needs to be updated. scoreLabel.name = kScoreHudName; scoreLabel.fontSize = 15; //2 - Color the score label green scoreLabel.fontColor = [SKColor greenColor]; scoreLabel.text = [NSString stringWithFormat:@"Score: %04u", 0]; //3 - Positions the score label near the top left corner of the screen scoreLabel.position = CGPointMake(20 + scoreLabel.frame.size.width/2, self.size.height - (20 + scoreLabel.frame.size.height/2)); [self addChild:scoreLabel]; //Applies the font of the health label SKLabelNode* healthLabel = [SKLabelNode labelNodeWithFontNamed:@"Courier"]; //4 - Give the health label a name so it can be referenced later when it needs // to be updated to display the health healthLabel.name = kHealthHudName; healthLabel.fontSize = 15; //5 - Colors the health label red healthLabel.fontColor = [SKColor redColor]; healthLabel.text = [NSString stringWithFormat:@"Health: %.1f%%", 100.0f]; //6 - Positions the health Label on the upper right hand side of the screen healthLabel.position = CGPointMake(self.size.width - healthLabel.frame.size.width/2 - 20, self.size.height - (20 + healthLabel.frame.size.height/2)); [self addChild:healthLabel]; } #pragma mark - Scene Update - (void)update:(NSTimeInterval)currentTime { //Makes the invaders move [self moveInvadersForUpdate:currentTime]; } #pragma mark - Scene Update Helpers //This method will get invoked by update -(void)moveInvadersForUpdate:(NSTimeInterval)currentTime { //1 - if it's not yet time to move, exit the method. moveInvadersForUpdate: // is invoked 60 times per second, but you don't want the invaders to move // that often since the movement would be too fast to see if (currentTime - self.timeOfLastMove < self.timePerMove) return; //2 - Recall that the scene holds all the invaders as child nodes; which were // added to the scene using addChild: in setupInvaders identifying each invader // by its name property. Invoking enumerateChildNodesWithName:usingBlock only loops over the invaders because they're named kInvaderType; which makes the loop skip the ship and the HUD. The guts og the block moves the invaders 10 pixels either right, left or down depending on the value of invaderMovementDirection [self enumerateChildNodesWithName:kInvaderName usingBlock:^(SKNode *node, BOOL *stop) { switch (self.invaderMovementDirection) { case InvaderMovementDirectionRight: node.position = CGPointMake(node.position.x - 10, node.position.y); break; case InvaderMovementDirectionLeft: node.position = CGPointMake(node.position.x - 10, node.position.y); break; case InvaderMovementDirectionDownThenLeft: case InvaderMovementDirectionDownThenRight: node.position = CGPointMake(node.position.x, node.position.y - 10); break; InvaderMovementDirectionNone: default: break; } }]; //3 - Record that you just moved the invaders, so that the next time this method is invoked (1/60th of a second from when it starts), the invaders won't move again until the set time period of one second has elapsed. self.timeOfLastMove = currentTime; //Makes it so that the invader movement direction changes only when the invaders are actually moving. Invaders only move when the check on self.timeOfLastMove passes (when conditional expression is true) [self determineInvaderMovementDirection]; } #pragma mark - Invader Movement Helpers -(void)determineInvaderMovementDirection { //1 - Since local vars accessed by block are default const(means they cannot be changed), this snippet of code qualifies proposedMovementDirection with __block so that you can modify it in //2 __block InvaderMovementDirection proposedMovementDirection = self.invaderMovementDirection; //2 - Loops over the invaders in the scene and refers to the block with the invader as an argument [self enumerateChildNodesWithName:kInvaderName usingBlock:^(SKNode *node, BOOL *stop) { switch (self.invaderMovementDirection) { case InvaderMovementDirectionRight: //3 - If the invader's right edge is within 1pt of the right edge of the scene, it's about to move offscreen. Sets proposedMovementDirection so that the invaders move down then left. You compare the invader's frame(the frame that contains its content in the scene's coordinate system) with the scene width. Since the scene has an anchorPoint of (0,0) by default and is scaled to fill it's parent view, this comparison ensures you're testing against the view's edges. if (CGRectGetMaxX(node.frame) >= node.scene.size.width - 1.0f) { proposedMovementDirection = InvaderMovementDirectionDownThenLeft; *stop = YES; } break; case InvaderMovementDirectionLeft: //4 - If the invader's left edge is within 1 pt of the left edge of the scene, it's about to move offscreen. Sets the proposedMovementDirection so invaders move down then right if (CGRectGetMinX(node.frame) <= 1.0f) { proposedMovementDirection = InvaderMovementDirectionDownThenRight; *stop = YES; } break; case InvaderMovementDirectionDownThenLeft: //5 - If invaders are moving down then left, they already moved down at this point, so they should now move left. proposedMovementDirection = InvaderMovementDirectionLeft; *stop = YES; break; case InvaderMovementDirectionDownThenRight: //6 - if the invaders are moving down then right, they already moved down so they should now move right. proposedMovementDirection = InvaderMovementDirectionRight; *stop = YES; break; default: break; } }]; //7 - if the proposed invader movement direction is different than the current invader movement direction, update the current direction to the proposed direction if (proposedMovementDirection != self.invaderMovementDirection) { self.invaderMovementDirection = proposedMovementDirection; } } #pragma mark - Bullet Helpers #pragma mark - User Tap Helpers #pragma mark - HUD Helpers #pragma mark - Physics Contact Helpers #pragma mark - Game End Helpers @end

  Read the article

• Some domain names not resolving on local network

  - by Solignis

  I am not really sure where to start with this one... I have a small network setup with some linux servers (Ubuntu 11.04 Server). 2 servers are running BIND 9 (NS01, NS02), they are configured as master and slave respectively. 1 server is running Zimbra ZCS 7.1.1 (MX01), it has a private BIND 9 server running to achieve a split DNS configuration. This DNS server does not interact with the other two, it forwards queries it can resolve to the other 2 that is it. No zone transfers. Zimbra is hosting 3 domains at the moment, solignis.local, solignis.com, campbellsurvey.net. The problem From with in my network I cannot connect to mail.campbellsurvey.net. When I mean I cannot connect, I mean if I open firefox and type https://mail.campbellsurvey.net I go nowhere, the address is supposed to connect to my Zimbra webmail. But it goes nowhere, the odd thing is if I try the same task from outside of the network it brings the website up like normal. If I try to create an account in thunderbird to connect to the same server using IMAP4 or POP3 I get an error saying that thunderbird cannot find the domain name. Even the zimbra client fails too. It is like from with in my own walls that campbellsurvey.net does not exist. But if step outside I can get it work with no problem at all. I had thought maybe the problem was with the DNS server (BIND 9), so just to eliminate it as a possibility I configured a windows server I use for VMware VCenter as a DNS server to see what would happen. The result was the same, its like something is preventing connections to those domains, but I have checked various firewalls and such. I checked port forwards, etc. So I am running out of ideas I know this is not a lot of information to work from and I can give more details about certain things as needed. I am just trying to figure out what could be going wrong. Any help you could offer would be much appreciated.

  Read the article

• 2nd Year College - Learning - Microsoft Server Products

  - by Ryan

  As the title says, I just finished my first year of college (majoring in Software Engineering). Fortunately my school likes Microsoft enough, and I can get pretty much anything I want that Microsoft sells. I also can get IBM Websphere and the like for free as well. Earlier this year, I set up an oldish computer (2.6 Pentium D, x64) to run ubuntu server headless. I'm predominately a Java developer, so Apache, Maven, Nexus, Sonar, SVN, etc made it onto the machine. It worked really well for personal and school projects, especially team projects (quick ramp up). Anyways, I started to pick up C# to complement my Java knowledge (don't judge me :P), and am interested in working with some of the associated Microsoft equivalents. The machine currently has the Ubuntu install, as well as Windows 7 Ultimate. I do all of my actual development work off my laptop, also running Windows 7 Ultimate. I was wondering what software you would recommend putting on the machine. I’m not actually serving anything off the machine itself, but in Ubuntu I had it doing integration tests with Hudson on every commit, and profiling my applications, etc, etc. The machine would be running headless, and I would remote into it. Here is what I am currently leaning towards / wondering about: Windows 7 Ultimate vs Windows Server 2008 (R2) (no one is really clear why I should go with one over the other) Windows Team Foundation Sharepoint (Never used it before, kind of meh about it) IBM Websphere or Glassfish (Some Java EE web server) SQL Server 2008 A DVCS In order to better control product conflicts / limit resource use, I’m wondering if I should install things into virtual machines (I can get VmWare or Microsoft Virtualization Products) I also plan on installing everything I had running under Linux (it’s almost entirely Java based development software, so it’ll run on both, only reason I went with ubuntu during the year was because the apache build seemed better). I’m primarily looking to become familiar with enterprise software development tools, as well as get something functional that will help my development process. (IE, I’ll still use project and assign tasks even though I might be the only one to assign tasks to, just to practice doing so). Is there any other software / configuration details I should explore? Opinions on my current list? I primarily use C#, Java, and PHP. I'm familiar with ruby, and python as well. Thanks!

  Read the article

• Which hardware to VM ratio for Build-Server virtualization?

  - by Martin

  Let's start with saying that I'm a total noob wrt. to server virtualization. That is, I use VMs often during development, but they're simple desktop machine things for me. Now to my problem: We have two (physical) build servers, one master, one slave running Jenkins to do daily tasks and build (Visual C++ Builds) our release packages for our software. As such these machines are critical to our company, because we do lot's releases and without a controlled environment to create them, we can't ship fixes. (And currently there's no proper backup of these machines in place, because they do not hold any data as such - it just would be a major pain to setup them again should they go bust. (But setting up backup that I'd know would work in case of HW failure would even be more pain, so we have skipped that until now.)) Therefore (and for scaling purposes) we would like to go virtual with these machines. Outsourcing to the cloud is not an option, not at all, so we'll have to use on-premises hardware and VM hosts. Each Build-Server (master or slave) is a fully configured (installs, licenses, shares in case of the master, ...) Windows Server box. I would now ideally like to just convert the (two) existing physical nodes to VM images and run them. Later add more VM slave instances as clones of the existing ones. And here begin my questions: Should I go for one VM per one hardware-box or should I go for something where a single hardware runs multiple VMs? That would mean a single point of failure hardware wise and doesn't seem like a good idea ... or?? Since we're doing C++ compilation with Visual Studio, I assume that during a build the hardware (processor cores + disk) will be fully utilized, so going with more than one build-node per hardware doesn't seem to make much sense?? Wrt. to hardware options, does it make any difference which VM software we use (VMWare, MS, Virtualbox, ... ?) (We're using Windows exclusively for our builds.) Regarding budget: We have a normal small company (20 developers) budget for this. ;-) That is, if it's going to cost a few k$ it's going to cost. If it's free - the better. I strongly prefer solutions where there's no multi-k$ maintenance costs per year.

  Read the article

• SQL Server suddenly using only a small portion of CPU.

  - by hermiod

  We've got a Windows 2008 R2 server running SQL Server 2008. All of a sudden, the SQLServer process is refusing to go above 20% CPU usage. As of last week, when running a heavy query against the db it would rise to 100% usage as I would expect. We've had this server for a while and it seems strange that it would just suddenly have this limit. This limit is causing our queries to take a lot longer than they normally would. No one has (knowingly at least) made any changes to the server configuration. After a bit of investigation, I discovered the sys.dm_os_sys_memory view. This shows 'available physical memory is high' bu at the same time the available physical memory is 339552kb where as the total is 4193848kb. It is worth noting that this is a virtual server running on vmware. Is there a setting somewhere with in SQL Server that sets the maximum CPU usage? I've found the settings in resource governor, although this is currently off as it always has been. We have recently started using Spotlight for SQL Server by Quest Software. It's playback database was located on this server for a short time this morning, I first noticed the problem shortly afterwards, although I hadn't been doing any queries prior to this so I don't know if this is the point at which the problem began, however the database was working as expected on Friday afternoon. The Windows log shows that the following settings were applied to the SpotlightPlaybackDatabase when it was created. 02/21/2011 08:45:02,spid60,Unknown,Setting database option TORN_PAGE_DETECTION to ON for database SpotlightPlaybackDatabase. 02/21/2011 08:45:02,spid60,Unknown,Setting database option MULTI_USER to ON for database SpotlightPlaybackDatabase. 02/21/2011 08:45:02,spid60,Unknown,Setting database option READ_WRITE to ON for database SpotlightPlaybackDatabase. 02/21/2011 08:45:02,spid60,Unknown,Setting database option AUTO_UPDATE_STATISTICS to ON for database SpotlightPlaybackDatabase. 02/21/2011 08:45:02,spid60,Unknown,Setting database option AUTO_CREATE_STATISTICS to ON for database SpotlightPlaybackDatabase. 02/21/2011 08:45:02,spid60,Unknown,Setting database option ANSI_WARNINGS to OFF for database SpotlightPlaybackDatabase. 02/21/2011 08:45:02,spid60,Unknown,Setting database option CONCAT_NULL_YIELDS_NULL to ON for database SpotlightPlaybackDatabase. 02/21/2011 08:45:02,spid60,Unknown,Setting database option RECOVERY to SIMPLE for database SpotlightPlaybackDatabase. 02/21/2011 08:45:02,spid60,Unknown,Setting database option QUOTED_IDENTIFIER to OFF for database SpotlightPlaybackDatabase. 02/21/2011 08:45:02,spid60,Unknown,Setting database option AUTO_CLOSE to OFF for database SpotlightPlaybackDatabase. Could any of these settings changes modified the settings applied to the whole server?

  Read the article

• Ubuntu + SSL ports + AVAST

  - by jurajvt

  I have an interesting problem with communication via standard SSL ports. Fresh installed Ubuntu 14.04 server + Postfix + Dovecot, SASL authentication provided by Dovecot, self-signed certificate generated trough the Dovecot script mkcert.sh. Redirected ports on ZyWALL USG 200. I can send and receive e-mails from outside with standard ports 25 and 110, but not over 587. I am connecting to my server from machine with Windows 8.1 + VMWare Player + Ubuntu 14.04 Desktop + ssh. On Windows host I have installed Avast! antivirus. When I am trying to telnet from virtual machine to server over 587, it refused connection. But when I turn on Avast! it let me in to message Connected to... Same with nmap. When Avast! is turned on it is show me all SSL ports. When I turned it off, only standard ports appeared. OpenSSL shows me CONNECTED(00000003). But outside virtual machine directly in Windows 8.1 using nmap with zenmap there are not opened SSL ports in both Avast! states. From other external linux machines are problems with touching SSL ports same - refused. I have turned on submission in master.cf and 587 port is correctly listening on 0.0.0.0 in process master.pid which belongs to Postfix. I can telnet, or nmap over port 587 to my domain directly from server. Other ports like 995, 993 are OK on localhost, too. It is true, that I can't send emails via 587 anyway (Avast! turned on/off), but I can see ports opened. It is possible, that I have simply bad certificate and Avast! has right one, so with turned it on I can see opened ports? EDIT: To be more clear, I can't see or using port 587 everywhere from outside (tried Thunderbird, telnet, openssl, nmap, putty, swaks; both from Linux or Windows machines) and that is my problem. It was only by chance that I saw opened ports when Avast! is turned on.

  Read the article

< Previous Page | 615 616 617 618 619 620 621 622 623 624 625 626  | Next Page >