Search Results

Search found 25123 results on 1005 pages for 'domain model'.

Page 654/1005 | < Previous Page | 650 651 652 653 654 655 656 657 658 659 660 661  | Next Page >

• DNS and DHCP not agreeing on an IP address

  - by Mr. Jefferson

  I'm having a problem where our Windows Server 2003 domain controller assigns my Windows 7 computer one IP address (x.x.x.75) via DHCP, but reports another (x.x.x.84) via DNS. This causes some interesting behavior on the network. If I change my adapter settings to get IP and DNS addresses from DHCP, I can access the internet, but no one on our network can access my computer. If I change my IP manually to what DNS says it is, I lose my internet access, but everyone can get to my computer again. I know that we have some old, invalid reverse DNS pointers hanging around (a reverse lookup on an IP address often gives more than one result, usually not including the one that is correct), so that could be contributing, but my problem is recent, and the invalid reverse pointers have been around a long time. What's going on, and how do I fix it?

  Read the article

• IPv6 local address in hosts file

  - by Dan

  I have set up a local domain on my Apache server. Then I added the following line in my /etc/hosts file ::1 exampledomain.local After I trying to navigate to it, (I tried Firefox and Chromium) I got a server not found error. Then I tried ping6 and it worked: dan@danny:~$ ping6 exampledomain.local PING exampledomain.local(exampledomain.local) 56 data bytes 64 bytes from exampledomain.local: icmp_seq=1 ttl=64 time=0.032 ms If I replace ::1 with 127.0.0.1 in my hosts file, it works fine. I'm not sure if this is relevant but this is my Virtual Host configuration in Apache2: <VirtualHost *:80> ServerAlias exampledomain.local DocumentRoot /home/dan/sites/exampledomain <Directory /home/dan/sites/exampledomain> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/exampledomain-error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel debug CustomLog ${APACHE_LOG_DIR}/exampledomain-access.log combined </VirtualHost> My question is: How can I make it work with the IPv6 address?

  Read the article

• IMAP/POP won't send allow emails to outside- New Dell PowerEdge 7310 running SBS 2011

  - by user779887

  I have a brand new out of the box Dell PowerEdge T310 running SBS 2011. Our employees at our remote offices can't send emails to recipients outside of our own domain. The workstations at the same location as the server aren't having any problem. I would at this time like to say "Thanks a lot" to the super-minds at Microsoft for protecting our email server from rogue computers attempting to send fake emails. (Silly me I thought proper login and password conventions would handle that.) I know this is something dealing with relaying but thus far nothing from any posts I've read have changed anything. Honestly, if someone is crafty enough to guess one of our login/password combos, let them send emails through our server I don't care!

  Read the article

• SMTP Verb Error on MSExchange Server 2003

  - by Jason Adams

  Hi, Every morning for the last two weeks or more I've had to reboot our Exchange Server and often I have to reboot it again during the day. We use a smarthost for sending our mail out and if I view the queues on Exhange System Manager the Small Business SMTP Connector is in a retry state with "The connection was dropped due to an SMTP protocol event sink". I turned logging up to maximum on ExchangeTransport and the only non-information event in EventViewer is “Message delivery to the host '62.13.128.187' failed while delivering to the remote domain 'mail.authsmtp.com' for the following reason: The connection was dropped due to an SMTP protocol event sink. The SMTP verb which caused the error is 'x-exps'. The response from the remote server is ''.” I stopped using the smarthost during the error condition and all I got was lots of small business connector connections with the same error. I can telnet into mail.authsmtp.com and send a mail during the error state. Any pointers would be gratefully received.

  Read the article

• Wireless Bridge with NetGear and TP-Link

  - by Tiago Cruz

  I have a wireless NetGear WGR614 v7 (little old) router connected to the internet, but I can't get a good signal in the other end of my house. I have another new one, model TP-Link TL-WR941ND wireless router. I was able to do the stuff works using a wired cable, but now, I would like to do the same using wireless connections (bridge mode, some like WDS?) Now, the computer connected to TP LINK was able to ping my computer connected to NETGEAR, but we cannot go IP ADDRESS outside my network, only internals ones. What can I do to configure this? Is needed that BOTH wireless routers support BRIDGE mode or only one its good enough? Thanks a lot!!

  Read the article

• Need to make a scheduled task run as another user but keep the current user’s environment

  - by Chad Marmon

  I need to backup users .pst files. The current method I am trying is making a shadow copy using Diskshadow. My script works great all but Diskshadow needs to be ran as administrator but also needs to retain the logged-on user's environment variables; specifically, the %USERNAME% and %HOMESHARE% variables so the right user’s files get copied up to the right network location. I have for the most part got this to work), but there’s no straightforward (or secure, at least) way to pass the password. If I set up a scheduled task to run the script as a domain user with local admin privs, the environment variables get lost. I need to run this script automagically so that there should be no user interaction. If I could figure out how to make a scheduled task run as another user but keep the current user’s environment, I think this would work, but I’ve been beating my head against that for a while now, without any luck.

  Read the article

• DNS Help (CNAMEs and A Records)

  - by Aaron Francis

  I'm trying to set up my DNS properly so that I can have hosting through PHPFog and email services using MailGun. PHPFog has us redirect the naked domain to the www and then use a CNAME to point the www to PHPFog and mailgun provides the MX records to use. The problem I'm having is that I have no A record set up on Hover because when I do, the CNAME no longer works (?), or at least it seems that way because I am no longer seeing my site from PHPFog, I'm seeing a Hover landing page. I know all the records I need, I just can't seem to get them to play nicely together. I've been told Amazon's Route 53 should be able to solve my problem, but I haven't yet figured out how. I just need to have hosting at PHPFog and email services through MailGun. As you can probably tell, I have only a very limited understanding of DNS, so forgive me if this is a silly question.

  Read the article

• Gateway SX2300-01u CPU/PSU issues

  - by Vlad

  I have a 2-yr-old Gateway SX2300-01u with an AMD Phenom X3 8550 that I feel has about a year or so of life left, but I am having a couple of hardware issues that I have not been able to resolve. First, the power supply fan sounds like much louder than before and the PSU itself is really hot. The PSU model (Liteon PS 5221-06) is not available at a reasonable price; are there any good alternatives? Could I replace just the PSU fan? Also, the CPU fan failed sometime back, but my replacement, which supposedly fits the MB (Socket AM2+) doesn't actually fit properly. Any idea why?

  Read the article

• Dynamic group membership to work around no nested security group support for Active Directory

  - by Bernie White

  My problem is that I have a number of network administration applications like SAN switches that do not support nested groups from Active Directory Domain Services (AD DS). These legacy administration applications use either LDAP or LDAPS. I am fairly sure I can use Active Directory Lightweight Directory Services (AD LDS) and possibly Windows Authorization Manager to work around this issue; however I am not really sure where to start. I want to end up with: A single group that can be queried over LDAP/LDAPS for all it’s direct members LDAP proxy for user name and password credentials to AD DS Easy way to admin the group, ideally the group would aggregate the nested membership in AD DS. a native solution using freely available components from the Windows stack. If you have any suggestions or solutions that you have previously used to solve this issue please let me know.

  Read the article

• Cannot Access IIS Website Locally Using www

  - by Reafidy

  I have small website hosted on our WS 2008 R2 server using IIS 7. I can access our website from anywhere in the world using: www.ourwebsite.co.nz But from any local computer on our internal network I can only access the website using: http://ourwebsite.co.nz Our employees are constantly asking why they cant just use www.ourwebsite.co.nz I'm not sure what info to provide. I presume that because the wesbite correctly functions from outside the local network that I have correctly setup our Web DNS A records at our domain host. And the problem may lie with our local DNS configuration.

  Read the article

• How is the "change password at next logon" requirement supposed to work with RDP using Network Level Authentication?

  - by NReilingh

  We have a Windows server (2008 R2) with the "Remote Desktop Services" feature installed and no Active Directory domain. Remote desktop is set up to "Allow connections only from computers running Remote Desktop with Network Level Authentication (more secure)". This means that before the remote screen is displayed, the connection is authenticated in a "Windows Security: Enter your credentials" window. The only two role services installed on this server is the RD Session Host and Licensing. When the "User must change password at next logon" checkbox is selected in the properties for a local user on this server, the following displays on a client computer after attempting to connect using the credentials that were last valid: On some other servers using RDP for admin access (but without the Remote Desktop Services role installed), the behavior is different -- the session begins and the user is given a change password prompt on the remote screen. What do I need to do to replicate this behavior on the Remote Desktop Services server?

  Read the article

• Windows Home Server style redundancy/multi-disk-support on Windows Server 2008 R2?

  - by user19597

  I'm setting up a fileserver for our department. It'll be connected to the domain. I want it to have a very large amount of storage (several TB). Ideally, it should also preserve disk space by identifying identical files and only storing them once. It should be fault tollerant so that if one of the drives fails, that drive can be replaced without losing any data. All of these features are available in Microsoft's consumer offering - Windows Home Server. However, I can't find these kind of features within the enterprise Windows Server 2008 R2. Am I missing something? I know that I could buy a Drobo, or similar, and use this instead. However, I would prefer to use a built-in feature of Windows Server should it exist. It seems surprising to me that these features should be available in Home Server but not in an enterprise fileserver.

  Read the article

• GPO Startup script did not execute on some computers

  - by Aaron Ooi

  The GPO Startup scripts works fine on other machine but not for another half of the machine. gpresult show that GPO was there. I ran RSOP and it show that the Startup script was there but it was never executed. There nothing on application error or anything related to the failed execution in the event viewer. I have set to Allow slow network connection too but it did not help for the startup script to execute. Permission read/execute granted to Domain Computers & Authenticated Users Other GPO settings works except Startup Script did not execute. The scripts works fine as other machine which success without any issue except some machine. I need help to sort this out as it troubles me where another half of the machine did not execute the script at all. It was all WIndows 7.

  Read the article

• my Website loss packet in 70% countries, how can i dertermine why its loss packets?

  - by user2511667

  I checked my website on google page speed tester, it show result 90/100. I checked my website on pingdom it shows good result there. When i check my website in cloudmonitor.ca.com, it shows good result in 30% countries and all other countries it show packet loss (100%) How we can determine why my website has packet loss? And what is its solution? Is this problem from my server or from my website? I created new html blank page and set it too my index page, after I tested, it still shows packet loss, guess this means the problem is not in my website. Here is live result When I visit my website in browser, website is working fine. But when i test my domain or IP 198.178.123.219 in command Prompt it shows "Request time out" Why time out in command prompt?

  Read the article

• How to allow users to monitor performance of a set of servers without touching every server?

  - by Jon Seigel

  I'm not a sysadmin, so this may be trivial. We have about 20 Windows Server 2008 R2 VMs we want to monitor centrally using Perfmon. The only issue is that the user account that's going to be doing the monitoring is not (and I assume will never be) in the Administrators group. The servers, and the user account (currently one, but could be more) are all on the same domain. Right now we're running a pilot with 5 of the servers, touching each VM manually to set the permissions, which is already getting cumbersome to manage. If we decide to roll this out to all the servers, we need a scalable solution to control access. What is the most flexible way to accomplish this? I'd like a solution that would work with 200 servers just as easily as the 20 servers we have now.

  Read the article

• Resolve a many-SSL-to-one IP for clients browsers that doesn't support SNI

  - by Emile

  Whoa, acronyms :) So according to this question you can have multiple SSL subdomains on one IP address as long as your server supports TLS (which Apache 2.2x does). Another answer to that question points out that the client browser must have SNI support to work, which IE doesn't have on Windows XP. So, what happens to people with that browser is a warning message saying that the SSL cert doesn't match the domain. Can one resolve this issue for those client browsers without SNI support? Does a wildcard (for subdomains) do the trick? Are there other (cheaper) options?

  Read the article

• Returning "200 OK" in Apache on HTTP OPTIONS requests

  - by i.

  I'm attempting to implement cross-domain HTTP access control without touching any code. I've got my Apache(2) server returning the correct Access Control headers with this block: Header set Access-Control-Allow-Origin "*" Header set Access-Control-Allow-Methods "POST, GET, OPTIONS" I now need to prevent Apache from executing my code when the browser sends a HTTP OPTIONS request (it's stored in the REQUEST_METHOD environment variable), returning 200 OK. How can I configure Apache to respond "200 OK" when the request method is OPTIONS? I've tried this mod_rewrite block, but the Access Control headers are lost. RewriteEngine On RewriteCond %{REQUEST_METHOD} OPTIONS RewriteRule ^(.*)$ $1 [R=200,L]

  Read the article

• Transferring FSMO roles over vpn

  - by Tom Bowman

  I have a server located at one of our offices which is quite old and is due to be upgraded soon, this server holds the FSMO roles, I have another server in another office, both are DC's in the same domain and both are replicated, both run Server 2003 standard. I need to transfer the FSMO roles from the old server to the the one I have in the other office before I upgrade. Also I am looking at bringing in Exchange 2010 server however I cant install/configure that until I transfer the roles as it needs to be at the same site as the schema master. My question really is as both servers replicate over a vpn, how quickly will the roles transfer and will there be downtime as I need to make sure that while the transfer is running, both servers will service logon's and share files. or would it be better to do it out of hours? many thanks and apologies if I've missed out anything Regards Tom

  Read the article

• can't resolve host (A) but FQDN is fine

  - by user1431356

  I am getting inconsistent name resolution locally with DNS I have 3 2012 Standard servers and some weirdness on 1. It is a standard install with IIS role added. TEST01 is a dev server. 192.119.1.220 with a host header of TEST01. DATA01 runs internal DNS on .240 and all servers and clients point here for DNS. There is a forward in DNS to 192.119.1.1 (router) with ISP external DNS #s mapped. if I ping TEST01 from a non AD machine, it I get "Could not find Host TEST01" If I ping TEST01 from a domain machine(another server), it resolves the IP but does not respond. if I ping TEST01.AD.local, DNS resolves the IP, but times out. I can access IIS by entering http://test.WWWDOMAIN.com and I can RDP to it, just not ping. Any idea where I should start?

  Read the article

• Migrating Shared Hosting and Email

  - by Chrisc

  Hey Guys, I know there has already been a question that has been posted here about migrating shared hosting accounts, but wanted to get a second opinion on my plan to move hosting providers. My business is moving our shared hosting account (hosting and email) to a new provider, and would like to have minimal downtime. Here is our current plan: Create a backup of our old site Upload our site to the new host Set up duplicate email accounts with our new host Change the name server records on our domain to point to our new host Leave our old site up long enough for DNS records to propagate completely. I'm hoping this should result in little downtime for both website and email. Because of the volume of high-importance emails our company receives on a daily basis downtime is very expensive and not tolerated. Thanks, Chris

  Read the article

• how do you set the admin password on openldap 2.4

  - by dingfelder

  I am getting started with openLdap 2.4 and am having a bit of trouble, all the examples I see seem to refer to previous versions which used the text config file slapd.conf but from what I see on discussions about v2.4, this has been deprecated. I thought prehaps I needed to add a user, and log in as them but when I try and run an ldapadd command, I get a prompt to enter a password: Enter LDAP Password: ldap_bind: Invalid credentials (49) Notes: I installed openldap server via yum (in fedora 15), and have installed phpldapadminbut also can try things on the command line if anyone has suggestions. After installing and starting I get the following response from a search: # ldapsearch -x -b '' -s base '(objectclass=*)' namingContexts # extended LDIF # LDAPv3 # base <> with scope baseObject # filter: (objectclass=*) # requesting: namingContexts dn: namingContexts: dc=my-domain,dc=com # search result search: 2 result: 0 Success # numResponses: 2 # numEntries: 1 I am glad to remove and reinstall the server if that helps, can anyone provide a link to tips that works for version 2.4 for a new setup?

  Read the article

• Logging on as root without winbind timeouts

  - by Josh Kelley

  How can I set up my Linux box so that, if the Active Directory domain controller is down, I can still log in as root, without any timeouts or delays? Following the example of most of the documentation out there, I've listed pam_winbind.so before pam_unix.so in my /etc/pam.d configurations. I believe that this is the cause of the problem. I remember seeing alternate /etc/pam.d setups that change the order and maybe add either pam_localuser or pam_succeed_if (to see if the uid is less than 500), but I can't find any specifics now (and I'm not enough of an expert in PAM to quickly and easily come up with a robust configuration on my own). What is the recommended setup for PAM with Winbind to avoid timeouts and delays if Active Directory is unavailable?

  Read the article

• How to troubleshoot a remote wmi query/access failure?

  - by Roman

  Hi I'm using Powershell to query a remote computer in a domain for a wmi object, eg: "gwmi -computer test -class win32_bios". I get this error message: Value does not fall within the expected range Executing the query local under the same user works fine. It seems to happen on both windows 2003 and also 2008 systems. The user that runs the shell has admin rights on the local and remote server. I checked wmi and dcom permissions as far as I know how to do this, they seem to be the same on a server where it works, and another where it does not. I think it is not a network issue, all ports are open that are needed, and it also happens within the same subnet. When sniffing the traffic we see the following errors: RPC: c/o Alter Cont Resp: Call=0x2 Assoc Grp=0x4E4E Xmit=0x16D0 Recv=0x16D0 Warning: GssAPIMechanism is not found, either caused by not reassembled, conversation off or filtering. And an errormessage from Kerberos: Kerberos: KRB_ERROR - KDC_ERR_BADOPTION (13) The option code in the packet is 0x40830000 Any idea what I should look into?

  Read the article

• Logitech MK300 : "no driver found"

  - by Oystein

  Hi I bought kewyboard and mouse from Logitech. The model is MK300. I wanna run 64-bits Windows 7 with this. When I connect the USB-receiver, Windows is trying to install it but gives me the error message: "no driver found". I tried to download SetPoint 4.80, but that didn't help. I have rebooted the computer several of times, tried different USB'ports, and have allso tried menye different mouses from Logitech. Non of this works. Have someone any suggestions for how I can fix my problem?

  Read the article

• NLB 2 Windows Server 2003 Servers

  - by Paul Hinett

  I need to configure windows NLB on 2 dedicated servers I have. My main machine has been running for some time, with several domain names pointing to the servers primary IP address. Both servers have 2 NIC's installed, and both have several secondary public IP addresses available if needed? What IP address would I use for the cluster IP, does this IP need to be added to the IP list of both public NIC's ip address list? What IP addresses do I use for the host's dedicated IP? Please help, this is driving me nuts...i've taken down the server twice on accident today! Thank you in advance!

  Read the article

< Previous Page | 650 651 652 653 654 655 656 657 658 659 660 661  | Next Page >