Search Results

Search found 35291 results on 1412 pages for 'start menu'.

Page 694/1412 | < Previous Page | 690 691 692 693 694 695 696 697 698 699 700 701  | Next Page >

  • No OS will boot, all freeze

    - by Gyan
    This is for a computer with the following configuration: Asus P5KPL-AM/PS motherboard Pentium D 820 (dual core 2.8 GHz) 1 x 2 GB DDR2-800 Transcend RAM 1 SATA2 Samsung 160 GB HDD 1 PATA LG CD/DVD Writer PS/2 generic Keyboard USB Razer mouse The computer was working fine till a month ago with a Hitachi HDD in place of the Samsung. But that drive died and I sent it in for warranty replacement. Since then and till last week, the computer had not been turned on. I then got hold of a spare but XPSP2-loaded Samsung drive from another computer and decided to get this computer temporarily running. However, when I tried to boot into XP, it didn't load. It got stuck at the first graphical screen. When trying Safe Mode, the file list would be updated up to diskio.sys and then freeze. If I tried to boot Kubuntu off a CD, I would get past the first menu, but then get stuck at the subsequent graphical interface in the loading process. A similar thing happend with a friend's Windows XP-on-a-pen-drive. I switched the RAM into the other slot, but no luck. Then I booted the Ultimate Boot CD and ran Memtest86+ and a couple of the bundled CPU stress tests but these detected no errors. Some searching on the Internet brought up the notion of the CPU failing to switch from "real" to "protected mode". I'm hoping to get a fix on what the problem is and what I can do about it. Edit: I've flashed to the latest BIOS, but that doesn't help. Also, Knoppix LiveCD also freezes. I notice that the LED in my mouse goes off at the time of freeze, but trying to boot without the mouse connected produces the same result.

    Read the article

  • Don't break header/footer when making page landscape format

    - by Steeven
    I have a document with a footer with page numbering and a header with some centered text. Long story short: I flipped one page to landscape format. Long story long: I made a forced page break to get a blank page. I then highlighted this page (that is, I highlighted the empty line on this page) and went to the page proporties menu window, clicked on the landscape format button, and chose to apply this setting for the highlighted text only. The result: All that is of course no big deal, and my page is flipped the 90 degrees as wished - but my header and footer break! They disappear from this page... and actually also from the next page (which is still upright portrait format), which is weird. And then the header and footer is back on the following pages again, though the page numbering restarts from 1. On this screenshot you can see that the previous and the following pages have headers and footers, but not the flipped one and not the page following the flipped one. What just happened here? How can I make the page numbering continue without restarting first of all, and then, how can I keep the header and footer on at least the upright page, that suddenly doesn't have them?

    Read the article

  • How do I properly configure a ZipInstaller .zic file?

    - by Iszi Rory or Isznti
    As of version 1.20, ZipInstaller is supposed to support the use of a configuration file to customize its installation options. Generally, all the options I want to use are available through the dialog so I really haven't bothered with the configuration file until now. The problem now is that certain tools, such as PsTools from Sysinternals, do not properly show their Product Name to ZipInstaller. ZipInstaller's dialog will let you customize the Start Menu folder and Program Files folder, but that still doesn't change the Product Name that it sees for the software. So, instead of having "PsTools" in my Add/Remove Programs, I get "Sysinternals Software". For some things, the situation is even more confusing. For example, the NIST SP 800-53 Reference Database Application gets installed as "FileMaker Pro Runtime". To rectify this, I've tried to use the aforementioned .zic configuration file. As I understand it, it's a basic INI file you create and put in the root of the ZIP file. ZipInstaller is supposed to read that file, and adjust its parameters accordingly. Mine looks like this: [install] ProductName=NIST_SP_800-53 ProductVersion=1.4.1 CompanyName=NIST Description=NIST_SP_800-53 InstallFolder=%zi.ProgramFiles%\%zi.ProductName% StartMenuFolder=%zi.CompanyName%\%zi.ProductName% I've named it `~zipinst~.zic and placed it in the root of the ZIP file, but when I run ZipInstaller it doesn't seem to recognize any of the information I've given it in the .zic file. What might I be doing wrong here?

    Read the article

  • A tiered approach to cloning linux partitons

    - by Djurdjura
    I'm looking at a strategy for cloning Linux (root) partitions without having to use a Live CD. Literature suggests rightly that the source and target partitions must be umounted to be able to get a clean clone. This assumes that you need to use a LiveCD. I was wondering if instead of requiring a LiveCD, if using a 3rd partition that would emulate the LiveCD functionality, if we can't achieve the same functionality. In other words, at a high level a system with 3 partitions (all bootable): Rescue Partition (LiveCD emulation) Running Partition (Source) Backup Partition (Destination) All 3 partitions are LVMS. When it's time to clone the source partition to the backup (destination) partition, we would boot to the rescue partition, unmount the other 2 partitions (is it required?), run disk check on the source, copy to the destination (dd or simple copy to avoid replicating the defragmentation from the source), run disk check on the destination partition, update Grub menu list to force boot from either partition, and reboot into that partition. My question, is it an approach that you'd recommend? MBR in all this? Any gotchas or extra checks required? Thanks, D. PS. On recommendation from members, posting here instead of stackoverflow.com.

    Read the article

  • Spots appear in a rectangle area on screen, ubuntu gnome 13.04, nvidia driver

    - by frozen-flame
    I am using Ubuntu Gnome 13.04 with nvidia-310 driver installed. My GPU is GeForce GTX650. Strange spots freqently appear on screen, with following traits: Spots are restricted in one or two rectangle areas at any instant. When typing, the pattern of spots change. Possibly increase, or all disappear when one key pressed. Mouse movement also influences. This problem last within one boot. The only way can I get rid of this problem is to reboot. It can be detected as soon as entering desktop if it appears. Simultaneously, the "power off" option is lost in the top-right menu of Gnome3. Never such problem when using windows 7 on the same computer, neither ubuntu with Nouveou driver. Seldomly, half of the screen become black. I googled a lot. Similar conditions are described, but no confirmed solution. Uninstall-r einstall strategy does not work. Any clue solving this will be appeciated.

    Read the article

  • Windows XP seemingly out of resources but plenty of free RAM and swap available

    - by Artem Russakovskii
    This one has been bothering me for years and so far I couldn't find an adequate solution. The problem occurs on pretty much every XP install I've done. After opening a variety of programs or the system running existing programs for a while, Windows seemingly runs out of resources, without telling me. There's ALWAYS free RAM. For example, it just happened to me and I had over a gig of free RAM. There are no viruses, spyware, or other nonsense - it is a Windows resource problem, but the question is which resource is it running out of, how does one pinpoint it, and how does one prevent it? Sometimes, this happens after running specific programs - for example, today it happened when I started Photoshop CS4 and Flash CS4 at the same time. I also noticed that restarting The Bat (email client by Ritlabs) seems to get rid of this problem for a while but again, this happens on machines that don't even have The Bat installed. So what does exactly happen? The symptoms are: pressing alt-tab doesn't bring up the list anymore - it just jumps to the next window instantly, very similar to the way Alt-Esc works, however in this case, it's due to not having enough resources to bring up the alt-tab menu random programs would randomly crash, citing random errors, out of memory errors, system resources, inabilities to do system calls, etc. random programs would start missing random parts - for example, Firefox top menus might disappear, pull up partial selections, or not pull up anymore altogether. IE might lose a few of its toolbars. Some programs might fail to redraw or would just plain go gray where the UI used to be. Windows itself never complains about running out of RAM, virtual memory, or anything at all, yet it's running out of something. The only clue I was able to find and apply the fix today was this Desktop Heap Limitation. I haven't confirmed the fix working as not enough time passed. In the meantime, what are everyone's thoughts?

    Read the article

  • What are useful .screenrc settings?

    - by gyaresu
    Basically like some of my own that I've posted below. I'm looking for added functionality to the programme 'screen'. At the very least have a look at the last line for a fantastic 'menu bar' at the bottom of a screen session. ## gyaresu's .screenrc 2008-03-25 # http://delicious.com/search?p=screenrc # Don't display the copyright page startup_message off # tab-completion flash in heading bar vbell off # keep scrollback n lines defscrollback 1000 # Doesn't fix scrollback problem on xterm because if you scroll back # all you see is the other terminals history. # termcapinfo xterm|xterms|xs|rxvt ti@:te@ # These will let you use bind -c selectHighs 0 select 10 #these three commands are bind -c selectHighs 1 select 11 #added to the command-class bind -c selectHighs 2 select 12 #selectHighs bind -c selectHighs 3 select 13 bind -c selectHighs 4 select 14 bind -c selectHighs 5 select 15 bind - command -c selectHighs #bind the hyphen to #command-class selectHighs screen -t rtorrent 0 rtorrent #screen -t tunes 1 ncmpc --host=192.168.1.4 --port=6600 #was for connecting to MPD music server. screen -t stuff 1 screen -t irssi 2 irssi screen -t dancing 4 screen -t python 5 python screen -t giantfriend 6 these_are_ssh_to_server_scripts.sh screen -t computerrescue 7 these_are_ssh_to_server_scripts.sh screen -t BMon 8 bmon -p eth0 screen -t htop 9 htop screen -t hellanzb 10 hellanzb screen -t watching 3 #screen -t interactive.fiction 8 #screen -t hellahella 8 paster serve --daemon /home/gyaresu/downloads/hellahella/hella.ini shelltitle "$ |bash" # THIS IS THE PRETTY BIT #change the hardstatus settings to give an window list at the bottom of the ##screen, with the time and date and with the current window highlighted hardstatus alwayslastline #hardstatus string '%{= mK}%-Lw%{= KW}%50>%n%f* %t%{= mK}%+Lw%< %{= kG}%-=%D %d %M %Y %c:%s%{-}' hardstatus string '%{= kG}[ %{G}%H %{g}][%= %{= kw}%?%-Lw%?%{r}(%{W}%n*%f%t%?(%u)%?%{r})%{w}%?%+Lw%?%?%= %{g}][%{B} %d/%m %{W}%c %{g}]'

    Read the article

  • Bootable GRUB partition

    - by MA1
    I have a customized live fedora 12 USB which is working fine. What i want to do is to make a partition of my hard disk bootable so that my customized fedora can be run from hard disk. To accomplish this i did the following steps: Created a primary partition(/dev/sda2) and format it as ext3 and set it as active. Copy all the files in the live usb to /dev/sda2. Following are the live usb contents(all directories): a. boot b. EFI c. LiveOS d. syslinux Then i installed the GRUB in boot/grub Created the grub.conf in boot/grub Following are the contents of each directory in the USB: syslinux/ boot.cat isolinux.bin splash.jpg vesamenu.c32 initrd0.img ldlinux.sys syslinux.cfg vmlinuz0 LiveOS/ livecd-iso-to-disk osmin.img squashfs.img EFI/ boot/ boot.conf grub.conf boot.efi bootia32.conf bootia32.efi splash.jpg splash.xpm.gz vesamenu.c32 initrd0.img isolinux.bin isolinux.cfg vmlinuz0 boot/grub/ core GRUB files grub.conf olpc.fth Following are contents of grub.conf default=0 splashimage=/EFI/boot/splash.xpm.gz timeout 2 hiddenmenu title funLinux kernel /EFI/boot/vmlinuz0 root=live:LABEL=myFun rootfstype=auto ro liveimg quiet ssb.blacklist=1 selinux=0 vga=normal nomodeset rhgb initrd /EFI/boot/initrd0.img Now when i try to boot from the hard disk it shows the grub menu and fedora starting to load but during loading it said No root device found Boot has failed, sleeping forever So, where is the problem? what i am doing wrong?

    Read the article

  • Dual boot windows 8 pro and windows 7 on XPS 8500 Special Edition

    - by Jesse
    I am trying to install a dual boot with windows 7 premium and windows 8 Pro on an XPS 8500 special edition. I created a new primary partition on my C: drive, inserted the windows 8 install disk, and rebooted my computer from DVD. I select custom install and the dialog box saying "Where do you want to install windows at?" pops up but none of my drives are listed. Please help me determine what is going on. I don't understand why none of my drives are showing up on this menu. Not even the original drive. When I go to load driver and click on the partition I created it tells me "No signed device drivers were found. Make sure the installation media contains the correct drivers, and then click OK." resolved above issue by running setup from the source folder on the install disk instead of booting from DVD. Was able to locate my new partition and start install. It completes the first step of "Copying windows files" just fine but then on the next step "Getting files ready for installation" my computer restarts and attempts to load windows 8 but keeps telling me my pc needs to restart. This keeps going on in an infinite boot loop. Please help, this has been a nightmare!

    Read the article

  • App-V Problems After SCCM 2007 SP2 Upgrade

    - by GAThrawn
    We're running an SCCM (MS System Centre Config Manager, successor to SMS) 2007 environment and delivering a number of applications to clients virtualized using App-V 4.5.1. The App-V apps are delivered by SCCM in Download-and-Execute, not streaming mode. The SCCM environment was recently service packed to SCCM 2007 SP2 (amongst other things this gives Win7 support). We also pushed out the updated SCCM clients to our workstations. This seems to have broken file associations for virtual apps for a large number of our users. The users can still open their App-V apps by finding the specific app on their Start Menu and clicking it's icon, but double-clicking an associated file in Explorer, or opening an email attachment gives the "This action is only valid for installed applications" error. There is a Technet blog entry from the App-V team talking about this issue "Upgrade to ConfigMgr 2007 SP2 may break App-V File Type Associations" but running the script there comes back saying "The User Interface option has been updated" but hasn't seemed to fix the problems for any of our users. Unfortunately the Technet blogs don't seem to have comments switched on so you can't see how this has worked out for other people. Anyone else had this problem, have you found any other way to fix it?

    Read the article

  • PC powers off at random times

    - by Timo Huovinen
    Short Version After experiencing some problems with Mobo batteries my PC started to power off at random times, the power off is instant and sudden and does not restart afterwards, need help figuring out the cause. Facts: Powers off when PC is playing games Powers off when PC is idle Powers off when PC is in safe mode Powers off when PC is in BIOS Powers off when PC is booted through a Windows installation USB Replaced the motherboard battery several times Replaced the 650W PSU with a 750W PSU Replaced the RAM Swapped the RAM between slots Re-applied thermal paste to the CPU Checked if the motherboard touches the case Nothing is overclocked PC Specs PC specs: OS: Windows 7 Ultimate SP1 RAM: klingston 1333MHz 4GB stick CPU: AMD Phenom II x4 955 Mobo: Gigabyte 88GMA-UD2H rev 2.2 Motherboard battery: CR2032 3v HDD: 500GB Seagate ST3500418AS ATA Device Graphics: ATI/AMD Radeon HD 6870 Very Long version Around 10 months ago I built a brand new gaming PC. Around 6 months ago it's time setting in windows started resetting to the year 2010. I swapped the Motherboard battery for a new one of the exact same size and shape and voltage, and the problems disappeared...for around 2 weeks. Then the same problem happened again, time gets reset, I swapped the battery again, and the problem was gone for good and everything was great for about 3 months.. then another problem started happening, the PC started to power off suddenly and without warning at completely random times, sometimes the PC works for and hour, sometimes 5 minutes. So I read on the forums that it might be either the PSU or the motherboard Battery or RAM or HDD or the Graphics card or the CPU or the motherboard or the drivers or a Virus or Grounding issues, or something short circuiting, basically it can be anything... I spent some days researching, and decided to remove the possibility of a virus. I reset the CMOS, cleared all BIOS settings and reinstalled windows 7 after a full format of the HDD, but the random power off kept happening. I then disabled the restart on error option in windows and looked at the event log for error events, but they did not help me figure out the problem. Network list service depends on network location awareness the dependency group failed to start Source Kernel Power Event 41 Task Category 63 Source Disk Event ID 11 Task Category None The driver detected a controller error on device disk I took apart the PC, every little piece, re-applied some expensive thermal paste to the CPU, and double checked that none of the pieces are touching the PC case. The problem was gone, the PC no longer powered off randomly I re-attached the graphics card and all was good for 4 months... then the power off problem appeared again, but was happening at high intervals, the PC would shutdown once in 2 days on average, at random points in time, sometimes when it's idle all day long, sometimes when it's running CRYSIS 2. I checked the CPU temperature, because I know that AMD CPU's have a built in protection mechanism that switches off the PC if the CPU gets too hot, and the Temp was 50C system temp, and 45C CPU after running the PC all day long (I did not do tests to see if there are any temperature spikes, don't know how to do them) Originally the PSU that powered the PC was 650Watts and had one 4 pin cable to power the CPU, I replaced it with a new 750Watts PSU which has two 4 pin cables for the CPU, but the problem remained. I removed the graphics card and let the motherboard use the built in one, but the PC kept suddenly powering off at random times. I took apart the PC completely again, and re-applied thermal paste to the CPU, added lots of insulation, and checked for any type of short-circuit possibility again and again, but the problem remained. The problem was like that for some months. I replaced the Battery a couple of times over the time, changed lots of options in windows, and tried everything I could, but it kept powering off, so I stopped using the PC as much as I used to, just living with the random power offs from time to time, until a couple of days ago, when the power off happens almost immediately after powering on the PC. I replaced the RAM with a brand new one, but that did not help. Took apart the PC again, checked for anything anywhere that might cause it, found some small scratches on the very edge of the motherboard to the left of the PCI express x16 slot. This might cause the problem, I thought, but the scratch looks very superficial, not deep at all, and if the scratch did harm the motherboard, wouldn't it cause it to not start at all? And why did it start to power off a while ago, and then suddenly stop powering off? The scratches could not have vanished??? did chkdsk \d but it powered off when it was at 75% I removed the hard disks, the graphics card, while I fiddled with the BIOS settings, and suddenly the PC shut down while I was looking at the BIOS version. This makes me realize, it is not caused by: HDD, Windows, Drivers or the Graphics card I cleared the CMOS again, updated the BIOS from F5 to F6f beta, but that did not help, it might even seem that the PC powers off even sooner. The shutdown even happened to me while I booted through a windows 7 installation USB and was in the repair console. I removed one of the cables powering the CPU, now only one 4pin cable powers it, and it worked for 30mins after doing that, which makes me think that it's the CPU overheating, and because it gets less power, it overheats slower? The things that I am still considering: CPU overheating (does not seem to overheat, maybe false readings?) Motherboard short circuiting (faulty motherboard?) I desperately need some advice in what is faulty, is it a faulty Motherboard or an overheating CPU? or maybe something else? I have been breaking my head over this problem over a span of 6 months. I'm not sure if this is a good place to ask this question, if it is not, then tell me where I can get some experienced help. More info I have also discovered a mysterious piece that seems to have fallen out of the motherboard i119.photobucket.com/albums/o126/yurikolovsky/strangepiece.jpg What is it? Looks like each time that it powers off the datetime gets reset I also found another forum post tomshardware.co.uk/forum/… except I don't have Integrated PeripheralsUSB Keyboard Function option in BIOS :S Comments summary (asked by Random moderator) Q. tell me, if the computer restarts, is it immediately? Does it take a second and then restarts? Do you see (BSOD) or hear (PSU, short circuit) any suspicious when it happens? After reading trough it, it remains the mainboard that is faulty. – JohannesM A. Immediate power off, all the fans stop instantly, all the light turn off instantly, no sound or anything, and it remains off until I turn it back on. Thanks for the feedback, faulty motherboard is what I fear. Q. Try stress-testing the system with Prime95 and see if errors or shutdowns occur when the CPU is under full load. – speakr A. Prime95 heat stress test peaked CPU heat at 60C after 5mins, it powered off after 30mins of testing in the middle of the test with no errors, Prime95 Heat test or the stress-testing with low RAM usage (small or in-place FFTs) do not report errors while testing for 10-60 mins. The power off does not seem like it is affected by Prime95 at all Makes me wonder if it's a CPU or Motherboard issue at all. Q. I had similar random/intermittent problems with my old board. It gave one of a few different symptoms: keyboard and/or mouse would die and/or the RAM wouldn't work and/or it would shut down. It was in bad shape. One problems was that my old PSU had literally burned the connector on it (browned around the pins), another was that a broken lead inside the layers of the PCB would work sometimes if it happened to be hot or if I bent the board—by jamming a hunk of wood behind it. I managed to keep the board alive for several years, but eventually nothing I did would make it work correctly anymore. – Synetech A. I will try that as the last resort, ok? ;) Q. Have you tried a different power cord, surge protector, outlet (on a different circuit). It's worth a shot just to ensure it's not subpar wiring or a week circuit (dips in power may cause shutdown if the PSU can't pull enough juice from the wall). – Kyle A. yes, I attached the PC to an entirely different outlet on a different circuit and the problem persists. After connecting it to a different outlet after starting the PC it gave me 3 long beeps and 1 short one, then the PC immediately proceeded to boot up normally. Q. Re-check your mainboard manual and all PSU connections to your mainboard to be sure that nothing is missing (e.g. 12V ATX 4-pin/6-pin connector). If you can provoke shutdowns with Prime95, then consider buying new hardware -- a stable system should run Prime95 for 24h without any errors. Prime95 mentions errors in the log when they occur and gives a summary after the stress test was stopped manually (e.g. "0 errors, 0 warnings", if all is fine) – speakr A. Re-checked, there are no more PSU connectors that I can physically connect, except the one ATX 4-pin (there are 2 that power the CPU) that I disconnected on purpose, I have reconnected it but the problem persists. Q. With one PC I had a short curcuit. The power button on the front plate had its cables soldered, but not isolated, and the contacts were very close to the metal case. A heavier touch was enough to cause a shutdown. The PC's vibration could be enough – ott-- A. yes, it seems to switch off with even the lightest touch, I switched on the PC, then pulled out the front panel power cable that connects to the motherboard so the power button does not work anymore, after 5 mins of working like that, with the power button completely disconnected, just sitting idle, the PC powered off again, I don't think it's the power button. Q. I wonder if you dare to operate components without the case, that is remove motherboard, power, disk ( just put the motherboard on a wooden desk). Don't bend the adapters when running like that. – ott-- A. yes, I do dare to do that, but only tomorrow, too tired/late right now.

    Read the article

  • Access Windows Boot Manager selector when timeout is set to 0?

    - by Kyle Cronin
    I've installed Wubi onto a Windows Vista computer. I've also set the boot timeout to 0: bcdedit /timeout 0 However, now I can't figure out how to get the menu to come up at all! I read on the internets that I had to hold F8 or space when starting up, but they doesn't seem to do anything. Is there a different key or setting I've overlooked? The computer itself is a Dell that's a few months old. The keyboard is USB, but I don't think that's the problem as I can get into the BIOS just fine. Maybe I'm doing it wrong? Am I supposed to hold the keys or rapidly tap them (I've tried both)? If it helps, here's the output from bcdedit: C:\Windows\system32>bcdedit Windows Boot Manager -------------------- identifier {bootmgr} device partition=C: description Windows Boot Manager locale en-US inherit {globalsettings} default {current} resumeobject {5460d9d2-d391-11dc-9d9f-aba67a8797c5} displayorder {current} {e2484fe7-5e97-11de-84d4-0024e8074422} toolsdisplayorder {memdiag} timeout 0 resume No Windows Boot Loader ------------------- identifier {current} device partition=C: path \Windows\system32\winload.exe description Windows Vista locale en-US inherit {bootloadersettings} recoverysequence {572bcd55-ffa7-11d9-aae0-0007e994107d} recoveryenabled Yes osdevice partition=C: systemroot \Windows resumeobject {5460d9d2-d391-11dc-9d9f-aba67a8797c5} nx OptIn Real-mode Boot Sector --------------------- identifier {e2484fe7-5e97-11de-84d4-0024e8074422} device partition=C: path \ubuntu\winboot\wubildr.mbr description Ubuntu

    Read the article

  • Windows XP error message: "Windows cannot find 'explorer.exe'"

    - by Meysam
    In Windows XP I can open "My Computer" and see all the hard drives. I can also see the explorer.exe process running among other processes in Task Manager. But after opening "My Computer", when I double click on one of the drives to open it, I get the following error message: Windows cannot find 'explorer.exe'. Make sure you typed the name correctly, and then try again. To search for a file, click the start button, and then click search. Although I could detect and remove several suspicious files using Malwarebytes & Microsoft Security Essentials, the problem still remains. The interesting point is that if I right click on one folder and select Open or Explore from the menu bar, I can open the folder! but if I double click on the folder, it does not open and I get the above error message. How can I fix this problem? Any advice would be appreciated! Update: I formatted the C: drive (NTFS), a deep format, and installed a fresh Windows XP on it. I am not getting this error when I double click on C drive icon anymore. But the same error appears when I double click on other drive names. Maybe I should format them too!

    Read the article

  • Fresh Install of SQL Server 2008 doesn't install managment studio. Help!

    - by Jordan S
    Ok I am running Windows 7, 64 bit. I cleaned of SQL server 2005 completely off my system leaving only SQL Compact Edition. I went here http://www.microsoft.com/downloads/details.aspx?FamilyID=01af61e6-2f63-4291-bcad-fd500f6027ff&displaylang=en and installed SQL Server 2008 Express Edition Service Pack 1. After the install, under my start bar menu all i have for SQL configuration tools are the Configuration Manager, Error and Usage Reporting and the Install Center. I don't have the SQL Managment Studio. So I went here http://www.microsoft.com/downloads/details.aspx?FamilyID=08e52ac2-1d62-45f6-9a4a-4b76a8564a2b&displaylang=en and downloaded the SQL Server 2008 Management Studio Express but when I try to install it I get a warning says This program has known compatibility issues and that I need to Install SQL Server 2008 Service Pack 1. I thought that is what I installed. So, I tried to continue running the install but I then get an error message that says Invoke or BeginInvoke can not be called on a Form before it is opened... How can I check if Service pack 1 is installed or not? What should I do?

    Read the article

  • Win 7: apps crash, then explorer crashes, then services fail, then boom

    - by snorfys
    Periodically, every 2-3 days one of my systems will go haywire: every app will crash search will fail via the start menu and then explorer will fail. Restarting explorer via taskmanager will cause it to fail again, then it'll BSOD and restart. The eventlog for when this happens goes something like this every time: ERROR: Session "ReadyBoot" stopped due to the following error: 0xC0000188 (supposedly not a problem) WARNING: The maximum file size for session "ReadyBoot" has been reached... (forget where I found out, but also 'not a problem') ERROR: Session "Circular Kernel Context Logger" stopped due to the following error: 0xC0000188 (again, supposedly not a problem) WARNING: The maximum file size for session "Circular Kernel Context Logger" has been reached... ERROR: Faulting application name: Explorer.EXE, version: 6.1.7600.16450, time stamp:... ERROR: Faulting application name: explorer.exe, version: 6.1.7600.16450, time stamp:... ERROR: Faulting application name: svchost.exe_iphlpsvc, version: 6.1.7600.16385, time stamp:... ERROR: The Service Name service terminated unexpectedly. It has done this 1 time(s) That last one happens a number of times but with a different service name. Then finally we have: ERROR: The Service Control Manager tried to take a corrective action (Restart the service) after the unexpected termination of the Server service, but this action failed with the following error: An instance of the service is already running. After that, I have my BSOD and logs complaining that windows started up without shutting down. It's a new machine: Intel i3 530 4gb RAM (Ran memtest for 4 hrs, no problems) 320GB WD/250GB Seagate HDDs (Happened on fresh installs on 2 separate HDDs) Win7 Pro/Ultimate x64 (wife's copy of pro, my copy of ult, no change) Fresh install + driver and windows update (happened without updates as well) I'm at a bit of a loss as to what I can look at next. Especially since it'll work like a charm for 2-3 days and then it's hooped for a night (I'm on it now in fact - no problems).

    Read the article

  • Can grub and BCD work simultaneously?

    - by wuputah
    Here's my setup. After I installed a new SSD, I have: Original Windows 7 on sdc1 (to be retired) Copy of Windows 7 on sdb2 A Windows system partition on sdb1 Ubuntu 12.04 on sda, /boot and ergo grub is on sda1 Grub is MBR on sda and set to boot from BIOS. I prefer to not change this; grub is much preferable as a boot manager. I've run update-grub from Ubuntu and grub seems to be correctly configured as all options are available: I can boot any of the 3 Windows partitions and Ubuntu. I also ran the repair tool to get Windows to add both installations to BCD. At present, choosing particular options seem to have no effect; the old version of Windows on sdc1 always boots. I don't understand what is causing this, but I can't figure out what. How does grub and BCD play along? I can't find any docs on this. My thought was to only boot Windows off sdb1, and then let BCD do the rest (present a menu to boot between sdb2 and sdc1, but I can't seem to get BCD to boot sdb2), but this has been unsuccessful. My configuration files: BCDEdit output grub.cfg

    Read the article

  • Kindle (client) for Mac

    - by doug
    So we're clear, i'm talking bout the client/software version here--ie, that you install on your Mac or PC--not the device. The Kindle client was recently released for the Mac. I bought a couple of Kindle-edition books and i'm reading them using this client. Astonishingly, two features i consider to be more or less essential to any ebook reader are missing in the Kindle client, either that, or i can't find them: (i) text searching; and (ii) highlighting text. First, does anyone know how to access the search feature? I'm aware of the "Go To" button at the top middle of the reader window--the options in that menu when you click the button are: "Cover", "Table of Contents", "Beginning" and "Location." "Location" requires that you type in an integer (but it doesn't correspond to page number--e.g., typing "167" brought me to the table of contents), not a search term. Second, there's a button on the upper right-hand corner of the window "Show Notes and Marks" yet i can't find any way to highlight text. The only kind of "note" or "mark" i have been able to record is to "bookmark" a page by clicking the "bookmark" button also at the top of the window.

    Read the article

  • Update Grub on Squeeze - Kernel downgrade due VMware Server

    - by vodoo_boot
    Hi! I happen to run into various problems regarding grub and kernels. I don't really care about the kernel internas. All I want is VMware server in that dedicated root-server. 1.) What is a bzImage vs. vmlinuz? kaze:~# ls /boot/ System.map-2.6.32-5-amd64 bzImage-2.6.33.2 config-2.6.33.2 initrd.img-2.6.32-5-amd64 System.map-2.6.33.2 bzImage-2.6.35.6 config-2.6.35.6 vmlinuz-2.6.32-5-amd64 System.map-2.6.35.6 config-2.6.32-5-amd64 grub I updated my menu.lst (grub2): timeout 5 default 0 fallback 1 title 2.6.32.5 kernel (hd0,1)/boot/vmlinuz-2.6.32-5-amd64 root=/dev/sda2 panic=60 noapic acpi=off title 2.6.35.6 kernel (hd0,1)/boot//bzImage-2.6.35.6 root=/dev/sda2 panic=60 noapic acpi=off title 2.6.32.3 kernel (hd0,1)/boot//bzImage-2.6.33.2 root=/dev/sda2 panic=60 noapic acpi=off That doesn't do well... I think the vmlinuz file is missing initrd or so. Dunno. In fact I don't give too much about kernel boot voodoo as long as it works. update-grub(2) does not work. Does anybody know what magical trick there is to get the 2.6.32-5 booting? 2.) I thought t follow the Deban wiki.. I cannot get header-files for the installed 35.6 or 33.2 kernel in the repositories. I cannot build foreign headers because they will not match the running kernel. So how does one deal with that situtation? I'd prefer not to have to downgrade the kernel. Thanks for any answers!

    Read the article

  • Cannot access firewalled jboss server from Internet Explorer

    - by Simon Gibbs
    I've produced a website for a client One Single Menu using JBoss and hosted it on Rackspace Cloud Servers running Ubuntu's Maverick Meerkat. Following advice, I esablished some iptables rule to protect jboss: iptables -I INPUT 1 -i lo -j ACCEPT iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT -p tcp --dport 22 -j ACCEPT iptables -t nat -A PREROUTING -p tcp --dport 80 -j REDIRECT --to-port 8080 iptables -I INPUT -p tcp --dport 8080 -j ACCEPT iptables -t nat -A OUTPUT -o lo -p tcp --dport 80 -j REDIRECT --to-port 8080 iptables -A INPUT -j DROP Now, several versions of IE on several computers on at least two different ISPs cannot access the onesinglemenu.com. Curl from within the datacenter, Firefox, and Safari on the same ISPs can all access the server fine. I even tried IE and Firefox on the same computer and IE failed but Firefox worked. The error behaviour is that IE hangs on connecting without reporting an error, even after a minute or so. No page is displayed at all. I find it quite odd that I'm having a browser specific connection issue, but it appears to be the case. Help!

    Read the article

  • Firefox crash on first load on Ubuntu Linux on Windows Laptop

    - by Ira Baxter
    I've had a Dell Latitude laptop since about 2000 without managing to destroy it. A month ago the Windows 2000 system on it did something stupid to its file system and Windows was completely lost. No point in reinstalling Windows 2000, so I installed an Ubuntu Linux on the laptop. Everything seems normal (installed, rebooted, I can log in, run GnuChess, poke about). ... but ... when I attempt to launch Firefox from the top bar menu icon, I get a bunch of disk activity, the whirling cursor icon goes round a bit and then everything stops: disk, icon, mouse. Literally nothing happens for 5 minutes. Ubuntu is dead, as far as I can tell. A reboot, and I can repeat this reliably. So on the face of it, everything works but Firefox. That seems really strange. The only odd thing about this system when Firefox is booting is that while it has an Ethernet port (that worked fine under Windows), it isn't actually plugged into an Ethernet. As this is the first Firefox boot since the Ubuntu install, maybe Firefox mishandles Internet access? Why would that crash Ubuntu? (I need to go try the obvious experiment of plugging it in).

    Read the article

  • Firefox crash on first load on Ubuntu Linux on older Dell Laptop

    - by Ira Baxter
    I've had a Dell Latitude laptop since about 2000 without managing to destroy it. A month ago the Windows 2000 system on it did something stupid to its file system and Windows was completely lost. No point in reinstalling Windows 2000, so I installed an Ubuntu Linux on the laptop. Everything seems normal (installed, rebooted, I can log in, run GnuChess, poke about). ... but ... when I attempt to launch Firefox from the top bar menu icon, I get a bunch of disk activity, the whirling cursor icon goes round a bit and then everything stops: disk, icon, mouse. Literally nothing happens for 5 minutes. Ubuntu is dead, as far as I can tell. A reboot, and I can repeat this reliably. So on the face of it, everything works but Firefox. That seems really strange. The only odd thing about this system when Firefox is booting is that while it has an Ethernet port (that worked fine under Windows), it isn't actually plugged into an Ethernet. As this is the first Firefox boot since the Ubuntu install, maybe Firefox mishandles Internet access? Why would that crash Ubuntu? (I need to go try the obvious experiment of plugging it in).

    Read the article

  • Why can't I boot in to Windows Recovery Environment to fix my HDD or salvage my data?

    - by Kevin
    I've been trying to get in to WindowsRE to salvage the files on my Sony Vaio laptop after it failed to load Vista (it finally, consistently displays "Error loading operating system" after months of such intermittent failures, usually rectified via restarts or utilizing Startup Repair or CHKDSK from WindowsRE) . The problem is, after successfully accessing it once after this failure (and many times before over the course of the laptop's life), I can no longer get it to load. During the last successful access (right after the failure), I ran startup repair, which itself failed and notified me that the boot sector was corrupt. I attempted to head in to Sony's proprietary recovery tools menu, which is accessible from WindowsRE when it is loaded from the recovery partition or recovery disk, however it hung. I have since been unable to access the recovery environment after restarting, using any of these methods: Access via the recovery partition (pressing F10 on boot) Access via recovery DVD (created using the same computer when it was healthy) Access via a Windows Vista installation DVD All three methods produce the same results: The computer acknowledges the boot attempt The computer successfully gets passed the "Windows is loading files" screen The computer successfully gets passed the Windows loading screen The computer then stalls at a black screen, while showing HDD activity (via indicator light). After a few minutes, the HDD activity ceases, and after a few more minutes, the over sized cursor that is utilized in WindowsRE appears on the black screen. The actual recovery environment, however, never appears, even after leaving the computer in such a state overnight. What is fustrating is that other bootable utilities, such as SeaTools for DOS and MemTest, boot up and run fine. In running perfectly normally, MemTest was able to produce a plethora of errors utilizing my RAM. I'm inclined to believe the RAM's faultiness may causing the WindowsRE booting to fail. Would this be a valid assumption? If I'm not mistaken, booting from external media utilizes the RAM, so such a reason is plausible, assuming my knowledge of bootloading is correct. Other than that, I can't figure out any reason why all the bootable utilities except WindowsRE run fine. Does anyone know what the problem is, or could be? Any solutions?

    Read the article

  • Vanishing Windows Desktop Shortcut Keys

    - by Henry Keiter
    The Situation Like you, I have many applications that I like to open. I've set up keyboard shortcuts for the most common, by placing a link on the desktop and setting its Shortcut Key property: This is all fine and dandy, most of the time. When I want to bring up the GIMP, I press Ctrl+Alt+G and the GIMP launches. Lovely. The Problem Sometimes--perhaps once a month per desktop shortcut--the shortcut key assignment simply vanishes. I press Ctrl+Alt+G and nothing happens, so I go check the shortcut and see that lo and behold: nothing is there. This happens regularly to all my shortcuts (not all at once). It doesn't matter what keys I assign, and there doesn't seem to be any correlation with particular applications being open or anything of that sort. This has happened on every Windows XP machine I've ever used with any regularity. Obviously what makes this issue particularly obnoxious is that it's not easily reproducible. I have searched long and hard for a solution for (or at least acknowledgement of) this problem, to no avail, so hopefully you guys know something that I don't. I did find this question, where the answers are all basically "use a third-party app", but as far as I could tell that was a slightly different issue, related to Explorer being busy. If the solution for this turns out to be the same, fine, but I'd prefer a native fix if at all possible. Note: I've tagged this with Windows in general because I seem to remember it happening on Windows 7 as well as XP, but I rarely notice it because I use the start-menu search in preference to desktop shortcuts.

    Read the article

  • Bind a key to a commandline command in Mac OS X?

    - by Stefan Lasiewski
    I have a Mac Powerbook running Leopard (10.5.8). Does Leopard provide an easy way to bind keys to commands which are typically run on the commandline? For example, I can open up Terminal.app and run the command /System/Library/Frameworks/ScreenSaver.framework/Resources/ScreenSaverEngine.app/Contents/MacOS/ScreenSaverEngine which will activate the screensaver and lock my screen. What if I want to bind 'Apple-key L' to this command and execute this globally, regardless of which application is in use at the moment? Can I do this, or can I only run ScreenSaverEngine from a Terminal window? I tried to set up global keyboard shortcuts, but it seems that this won't allow me to bind a key to an arbitrary shell command: Note: You can create keyboard shortcuts only for existing menu commands. You cannot define keyboard shortcuts for general purpose tasks such as opening an application or switching between applications. I tried to set up a application keyboard shortcut, but commands like ScreenSaverEngine don't seem to be an application. Note that this Screensaver/Lock screen is just one example. I have come across other nifty commands which I might want to bind to a key-combination as well. I can do this in Gnome and Windows (with varying success). How about with Leopard? Should I be looking at doing this with AppleScript? (I haven't used that since the Hypercard days ...)

    Read the article

  • Gwibber doesnt launch post upgrade

    - by Arcath
    i updated my pc from ubuntu 9.10 to 10.04 and one of the things i was looking forward too was the "me menu" and gwibber. For some reason gwibber doesnt launch at all. when i try to launch it from terminal i get: [21:02:20][arcath@Highgate ~]$ gwibber ** (gwibber:8182): WARNING **: Trying to register gtype 'WnckWindowState' as enum when in fact it is of type 'GFlags' ** (gwibber:8182): WARNING **: Trying to register gtype 'WnckWindowActions' as enum when in fact it is of type 'GFlags' ** (gwibber:8182): WARNING **: Trying to register gtype 'WnckWindowMoveResizeMask' as enum when in fact it is of type 'GFlags' Traceback (most recent call last): File "/usr/bin/gwibber", line 50, in <module> from gwibber import client File "/usr/lib/python2.6/dist-packages/gwibber/client.py", line 3, in <module> import gtk, gobject, gwui, util, resources, actions, json, gconf File "/usr/lib/python2.6/dist-packages/gwibber/gwui.py", line 2, in <module> import os, json, urlparse, resources, util File "/usr/lib/python2.6/dist-packages/gwibber/util.py", line 2, in <module> from microblog.util.couch import RecordMonitor File "/usr/lib/python2.6/dist-packages/gwibber/microblog/util/couch.py", line 10, in <module> OAUTH_DATA = desktopcouch.local_files.get_oauth_tokens() File "/usr/lib/python2.6/dist-packages/desktopcouch/local_files.py", line 323, in get_oauth_tokens oauth_token_secrets = cf.items_in_section("oauth_token_secrets")[0] File "/usr/lib/python2.6/dist-packages/desktopcouch/local_files.py", line 189, in items_in_section raise ValueError("Section %r not present." % (section_name,)) ValueError: Section 'oauth_token_secrets' not present. and i cant work out whats wrong with it. Can anyone point me in the right direction?

    Read the article

< Previous Page | 690 691 692 693 694 695 696 697 698 699 700 701  | Next Page >