Search Results

Search found 23614 results on 945 pages for 'update from'.

Page 707/945 | < Previous Page | 703 704 705 706 707 708 709 710 711 712 713 714  | Next Page >

• raid md device is not remove from memory, how to overcome this problem

  - by santhosha

  i create raid 10 , i removed two arrays form md11 one by one , after that i going to editing the contents those are mounted ( it will be not responding stage), after i try for remove arrays those are left it is shows device or resource busy ( is not removed from memory). i try to terminate process this is also not work, i absorve from 4 days resync will be 8.0% it can not modifying. cat /proc/mdstat Personalities : [raid1] [raid0] [raid6] [raid5] [raid4] [linear] [raid10] md11 : active raid10 sde1[3] sdj14 286743936 blocks 64K chunks 2 near-copies [4/1] [___U] [1:2:3:0] [=...................] resync = 8.0% (23210368/286743936) finish=289392.6min speed=15K/sec mdadm -D /dev/md11 /dev/md11: Version : 00.90.03 Creation Time : Sun Jan 16 16:20:01 2011 Raid Level : raid10 Array Size : 286743936 (273.46 GiB 293.63 GB) Device Size : 143371968 (136.73 GiB 146.81 GB) Raid Devices : 4 Total Devices : 2 Preferred Minor : 11 Persistence : Superblock is persistent Update Time : Sun Jan 16 16:56:07 2011 State : active, degraded, resyncing Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Layout : near=2, far=1 Chunk Size : 64K Rebuild Status : 8% complete UUID : 5e124ea4:79a01181:dc4110d3:a48576ea Events : 0.23 Number Major Minor RaidDevice State 0 0 0 0 removed 1 0 0 1 removed 4 8 145 2 faulty spare rebuilding /dev/sdj1 3 8 65 3 active sync /dev/sde1 umount /dev/md11 umount: /dev/md11: not mounted mdadm -S /dev/md11 mdadm: fail to stop array /dev/md11: Device or resource busy lsof /dev/md11 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME mount 2128 root 3r BLK 9,11 4058 /dev/md11 mount 5018 root 3r BLK 9,11 4058 /dev/md11 mdadm 27605 root 3r BLK 9,11 4058 /dev/md11 mount 30562 root 3r BLK 9,11 4058 /dev/md11 badblocks 30591 root 3r BLK 9,11 4058 /dev/md11 kill -9 2128 kill -9 5018 kill -9 27605 kill -9 30562 kill -3 30591 mdadm -S /dev/md11 mdadm: fail to stop array /dev/md11: Device or resource busy lsof /dev/md11 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME mount 2128 root 3r BLK 9,11 4058 /dev/md11 mount 5018 root 3r BLK 9,11 4058 /dev/md11 mdadm 27605 root 3r BLK 9,11 4058 /dev/md11 mount 30562 root 3r BLK 9,11 4058 /dev/md11 badblocks 30591 root 3r BLK 9,11 4058 /dev/md11 cat /proc/mdstat Personalities : [raid1] [raid0] [raid6] [raid5] [raid4] [linear] [raid10] md11 : active raid10 sde1[3] sdj14 286743936 blocks 64K chunks 2 near-copies [4/1] [___U] [1:2:3:0] [=...................] resync = 8.0% (23210368/286743936) finish=289392.6min speed=15K/sec

  Read the article

• How do I use a Zyxel P660 router as just modem so that I can connect a WRT54GL router in cascade?

  - by Kenji Kina

  I have a Zyxel P660HW-t1 v2 router (which has a DSL port) and a WRT54GL router (which does not) and the exact same situation as in this thread (UPDATE: the connection between both devices is the important part, since I have been able to set the zyxel router to act as bridge by itself quite nicely. I have accessed my internet connection directly through a PC using PPPoE without any problems, the issues arise when I try to connect the WRT54GL router between the zyxel "modem" and my PCs). I've been trying to use my Zyxel P660 as a modem only: Setup P660 to bridge mode. Changed WRT54GL's IP address to 192.168.2.1 to avoid a conflict on the network. Configured the PPPoE settings as required on WRT54GL. The thing is that when I connect the Zyxel modem/router on the WRT54GL's internet port the light doesn't turn on. I can confirm that this port has been working ok, so I'm not really sure what's going between the devices. I checked several settings such as IPs, tried disabling DHCP on Zyxel/Linksys, Firewall on both and still nothing. Also, I tried connecting Zyxel directly to a computer in bridge mode and dialed successfully. I have even posted a question here before, thinking that what I asked there was the only thing I needed to get things done. Unfortunately it wasn't, and the guy that solved his issue didn't give enough details in his post (and is quite unlikely to give more details since he was an anonymous user). For one, I don't know how to do this part: connected to the Zyxel through telnet and forced LAN port 1 to be at 100mb as well I can't find the option that does this on the zyxel router. Not through telnet or the web admin. Can anyone help me solve this?

  Read the article

• XenServer and ZFS via NFS

  - by Jeroen Jacobs

  I'm trying to connect a NFS share to XenCenter. The NFS server is a ZFSGuru distro (uses FreeBSD). The zfs volume was exported like this: /sbin/zfs set sharenfs="on" temppool/share According to "showmount", it's available: showmount -e /temppool/share Everyone However, when I try to connect to it with XenServer (so it can be used as storage for VHD), I get the following error: Internal error:Failure("Storage_access failed with: SR_BACKEND_FAILURE_73: [; NFS mount error[opterr=mount failed with return code 32]; ]") Anyone got an idea? Update: This is from the log on the NFS server: Sep 3 16:23:10 zfsguru mountd[962]: mount request from 192.168.10.217 for non e xistent path /temppool/share/7c8d3f2f-e0e0-5263-ccad-1cd32a4139cf Sep 3 16:23:10 zfsguru mountd[962]: mount request denied from 192.168.10.217 fo r /temppool/share/7c8d3f2f-e0e0-5263-ccad-1cd32a4139cf Sep 3 16:23:11 zfsguru mountd[962]: mount request from 192.168.10.217 for non e xistent path /temppool/share/7c8d3f2f-e0e0-5263-ccad-1cd32a4139cf Sep 3 16:23:11 zfsguru mountd[962]: mount request denied from 192.168.10.217 fo r /temppool/share/7c8d3f2f-e0e0-5263-ccad-1cd32a4139cf Sep 3 16:28:20 zfsguru mountd[962]: mount request denied from 192.168.10.217 fo r /temppool/share/17922178-0dfb-edf3-0037-2eddd79b9d02 Sep 3 16:28:43 zfsguru last message repeated 5 times Sep 3 16:35:00 zfsguru mountd[962]: mount request denied from 192.168.10.217 fo r /temppool/share/b5735ccf-1997-8d77-83a0-2f34e37dda8d Sep 3 16:35:33 zfsguru last message repeated 4 times Sep 3 16:35:34 zfsguru mountd[962]: mount request denied from 192.168.10.217 fo r /temppool/share/b5735ccf-1997-8d77-83a0-2f34e37dda8d It seems XenServer is able to create the directories, but is enable to mount them afterwards.

  Read the article

• ZFS - destroying deduplicated zvol or data set stalls the server. How to recover?

  - by ewwhite

  I'm using Nexentastor on a secondary storage server running on an HP ProLiant DL180 G6 with 12 Midline (7200 RPM) SAS drives. The system has an E5620 CPU and 8GB RAM. There is no ZIL or L2ARC device. Last week, I created a 750GB sparse zvol with dedup and compression enabled to share via iSCSI to a VMWare ESX host. I then created a Windows 2008 file server image and copied ~300GB of user data to the VM. Once happy with the system, I moved the virtual machine to an NFS store on the same pool. Once up and running with my VMs on the NFS datastore, I decided to remove the original 750GB zvol. Doing so stalled the system. Access to the Nexenta web interface and NMC halted. I was eventually able to get to a raw shell. Most OS operations were fine, but the system was hanging on the zfs destroy -r vol1/filesystem command. Ugly. I found the following two OpenSolaris bugzilla entries and now understand that the machine will be bricked for an unknown period of time. It's been 14 hours, so I need a plan to be able to regain access to the server. http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6924390 and http://bugs.opensolaris.org/bugdatabase/view_bug.do;jsessionid=593704962bcbe0743d82aa339988?bug_id=6924824 In the future, I'll probably take the advice given in one of the buzilla workarounds: Workaround Do not use dedupe, and do not attempt to destroy zvols that had dedupe enabled. Update: I had to force the system to power off. Upon reboot, the system stalls at Importing zfs filesystems. It's been that way for 2 hours now.

  Read the article

• Why can't I ssh into my server using my private key?

  - by user61342

  I just setup my new server as I used to, and this time I can't login using my private key. The server is ubuntu 11.04. And I have setup following ssh key directories. root@myserv: ls -la drwx------ 2 root root 4096 Sep 23 03:40 .ssh And in .ssh directory, I have done chmod 640 authorized_keys Here is the ssh connection tracebacks: OpenSSH_5.9p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /etc/ssh_config debug1: /etc/ssh_config line 20: Applying options for * debug1: Connecting to [my.server.ip] [[my.server.ip]] port 22. debug1: Connection established. debug1: identity file /Users/john/.ssh/id_rsa type -1 debug1: identity file /Users/john/.ssh/id_rsa-cert type -1 debug1: identity file /Users/john/.ssh/id_dsa type 1 debug1: identity file /Users/john/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.8p1 Debian-1ubuntu3 debug1: match: OpenSSH_5.8p1 Debian-1ubuntu3 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.9 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA ef:b8:8f:b4:fc:a0:57:7d:ce:50:36:17:37:fa:f7:ec debug1: Host '[my.server.ip]' is known and matches the RSA host key. debug1: Found key in /Users/john/.ssh/known_hosts:2 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Trying private key: /Users/john/.ssh/id_rsa debug1: Offering RSA public key: /Users/john/.ssh/id_dsa debug1: Authentications that can continue: publickey,password debug1: Next authentication method: password root@[my.server.ip]'s password: Update: I have found the reason but I can't explain it yet. It is caused by uploading the key using rsync -chavz instead of scp, after I used scp to upload my key, the issue is gone. Can someone explain it? Later, I tried rsync -chv, still not working

  Read the article

• Why can't I reconnect to my Philips SHB9000 bluetooth headset?

  - by Thomas Eyde

  This is so annoying. When I connected my Philips SHB9000 bluetooth to my Windows 7 (64 bit) for the very first time, it worked well. I had to manually change the default playback device, but otherwise it worked. Then, when I start up my computer from standby, it's nearly random when I can reconnect or not. My last option is to remove the bluetooth device and reconnect it. But now, even that doesn't work. The sad thing is, this used to work better on Windows 7 beta. Windows Update has a new driver which fails to install. Searching for this driver yields nothing. I thought all vendors had an official site for their drivers? Well, Philips seems to have none. If there is no answer to this problem, my advice is to NOT buy this headset. It's good looking, the sound is nice, but what need do we have from that if we can't use the bloody device?

  Read the article

• 3d Studio Max and 2+CPUs - Core limit ?

  - by FreekOne

  Hi guys, I am scouting for parts to put in a new machine, and in the process, while looking at different benchmarks I stumbled upon this benchmark and it got me a bit worried. Quote form it: Noticably absent from this review is an old-time favorite, 3ds Max. I did attempt to run our custom 3ds Max benchmark on both the 2009 and 2010 versions of the software, but the application would simply not load on the Westmere box with hyper-threading enabled. Evidently Autodesk didn't plan far enough ahead to write their software for more than 16 threads. Once there is an update that addresses this issue, I will happily add 3ds Max back into the benchmarking mix. Since I was looking at dual hexa-core Xeons (x5650), that would put my future machine at 24 logical cores which (duh) is well over 16 cores and since I'm mostly building this for 3DS Max work, you can see how this would seriously spoil my plans. I tried looking for additional information on this potential issue, but the above article seems to be the only one who mentions it. Could anyone who has access to a 16 core machine or an in-depth knowledge about 3DS Max please confirm this ? Any help would be much appreciated !

  Read the article

• Installing rpm module of Python for yum

  - by vito

  I've installed Python and yum from source (configure, make, make install), not using RPMs because that's leading to several other issues. So when I executed: # yum update ... I get the following error: Traceback (most recent call last): File "/usr/bin/yum", line 22, in <module> import yummain File "/usr/share/yum/yummain.py", line 22, in <module> import clientStuff File "/usr/share/yum/clientStuff.py", line 18, in <module> import rpm ImportError: No module named rpm Now because I've installed yum and python from source, do I need to install Python's rpm module from source, too? Because installing the rpm for this module lead to the following error: # rpm -vih rpm-python-3.0.4-6x.i386.rpm warning: rpm-python-3.0.4-6x.i386.rpm: V3 DSA signature: NOKEY, key ID db42a60e error: Failed dependencies: python >= 1.5.2 is needed by rpm-python-3.0.4-6x.i386 libbz2.so.0 is needed by rpm-python-3.0.4-6x.i386 librpm.so.0 is needed by rpm-python-3.0.4-6x.i386 Suggested resolutions: /var/spool/up2datepython-2.3.4-14.7.el4.x86_64.rpm I tried searching for the source of this module, but I couldn't find it. Any help in installing this module is appreciated. Thanks for your time. Other info: # python -V Python 2.6.5

  Read the article

• PXE boot and DHCP server configuration Failing Auto Installation

  - by Harihara Vinayakaram

  I have a ISC DHCP Server installed on Ubuntu 9.10 . I have managed to successfully boot a PXE client , obtain a DHCP address and load the initrd.gz file. But I am facing a vague problem when the debian installer starts up and tries to get a DHCP server The client send a DHCP request and I verified that is the same MAC Address. But I get a DHCP DECLINE (The client declines the address ). It offers all the address in the pool and then there is a DHCP NAK (no more free leases ) I tried using the Option no-ping, and also option one-client-one-lease but it does not help . If I set the client to use a fixed-address then the above problem is not there and the installation proceeds smoothly Can you give me any clues on what should be the DHCP server configuration My dhcpd.conf looks like this { ddns-update-style none; option domain-name "hadoop-myorg.org"; option domain-name-servers 192.168.3.5; default-lease-time 600; max-lease-time 7200; group { filename "pxelinux.0"; next-server 192.168.13.184; host hadoop1 { hardware ethernet 90:e6:ba:d5:53:f8; } } subnet 192.168.13.0 netmask 255.255.255.0 { option routers 10.0.0.254; pool { option domain-name-servers 192.168.3.5; max-lease-time 3000; range 192.168.13.55 192.168.13.65; deny unknown-clients; } } }

  Read the article

• SSH Tunnel for Remote Desktop via Intermediary Server Part II

  - by Mihai Todor

  I asked previously how to configure 2 SSH tunnels using an intermediary server in order to run Remote Desktop through them and I managed to make it work. Now, I'm trying to do the same, using the same machines, but in reverse order. Here's the setup: Windows 7 PC in a private network, sitting behind a firewall. Public access Linux server, which has access to the PC. Windows 7 laptop, at home, on which I wish to do Remote Desktop from the PC. I use Putty on the laptop to create a reverse tunnel from it to the Linux server: R60666 localhost:3389. I use Putty on the PC to create a regular tunnel from it to the Linux server: L60666 localhost:60666. I SSH to the Linux sever and I run telnet localhost 60666 and it seems to produce the expected output, as described in the debugging tips that I received here. I try to connect Remote Desktop from the PC to the laptop: localhost:60666. It asks for my username and password, I click OK and it locks my current session on the laptop (so I see the welcome screen on the laptop instead of my desktop), it shows the "Welcome" message in the Remote Desktop screen and then it just goes black. It doesn't disconnect, it doesn't provide any error and I'm not able to perform any actions in the Remote Desktop screen. I tried the same setup with a Windows XP laptop and I'm experiencing the same symptoms. I also tried to use different ports than 60666, but nothing changed. Does anybody have any idea what I'm doing wrong? Update: As pointed out by @jwinders, I'm not able to run telnet PC 3389 from the Linux server directly. Since Windows Firewall has a rule to allow all connections on port 3389, I have no idea what is blocking it. Fortunately, I'm able to create a SSH tunnel from the Linux machine to the PC ssh 3389:localhost:3389 'domain\user'@PC.

  Read the article

• Outlook 2007 OST File Indexing and OneNote 2007 Indexing are Broken

  - by Matt

  I'm running Outlook 2007 under Windows 7 Home Premium RTM. My OST file was previously being properly indexed but eventually searches significantly slowed down so I suspected a problem. Searching and indexing appears broken in OneNote 2007 as well as search time is now significantly longer. I brought up the Outlook 2007 Search Options dialog and noticed that my mailbox (running from an Exchange 2007 server) wasn't listed in the "Index messages in these data files:" list box. Next I ran the Windows "Find and fix problem with windows search" wizard which reported no errors. Then I brought up the Windows Indexing Options dialog which shows Outlook listed (as shown here): then clicked Advanced and Rebuilt the index. No dice - the listbox in the Outlook 2007 dialog still didn't show my mailbox. When I clicked the Modify button in the Indexing Options dialog I see the following: When I hover over the "oneindex://..." entry, the alt text indicates "This location is currently unavailable". When I delete it and rebuild the index, this entry returns. UPDATE: Comparison of the last screenshot above with a working PC shows that on the broken PC, the lower half of the dialog lists Outlook but neither Outlook or OneNote are showing in the upper half. The working PC has Outlook and OneNote in both parts of the dialog.

  Read the article

• IIS 7.5 Basic authorization issue

  - by Alsin

  When I log on using correct user name\password (I always copy-paste them) I get 401.1 error. User name and password are correct (user is created on server locally, not a domain one). I can run program as this user (runas /noprofile /user:tmp notepad.exe). Basic authorization's default domain is a server name, realm is empty. I've saved FailedReqLogFile. AUTH_BASIC_LOGON_FAILED shows ErrorCode="Logon failure: unknown user name or bad password. (0x8007052e)" and MODULE_SET_RESPONSE_ERROR_STATUS shows ModuleName="BasicAuthenticationModule", Notification="AUTHENTICATE_REQUEST", HttpStatus="401", HttpReason="Unauthorized", HttpSubStatus="1", ErrorCode="Logon failure: unknown user name or bad password. (0x8007052e)", ConfigExceptionInfo="" And one more thing - if I use my domain login\password it woks! Basic Authentications is only enabled authentication in application... Could you please suggest me how I can troubleshoot and fix this issue? Maybe somebody hit it before... Best regards, Alex UPDATE: I get 401.1 when I trying to access site from local host. I can actually access files from remote host.

  Read the article

• Hyper V Server 2012 Remote Management Using Workgroup

  - by Chris Kolenko

  I'm trying to remotely manage Hyper V server 2012 from a windows 8 pc, both client and server are on a workgroup. I've spent about 3-4 hours trying to get this working with no luck so far trying the following: Creating a new administrator on the server with the same details as the client ie. username / password. Add an entry into my hosts file to point to the remote ip by server name. Tried using HVRemote. Disabled both firewalls. The error that I'm getting is RPC Service Unavailable. How can I accomplish what I'm trying to do? Update Some of the operations on the Hyper-V Manager work. IE. Virtual Switch Works. I can open the New VM Wizard. I run into an error when creating a new Virtual Hard Disk tho. I've tried creating a VM without a hard disk, which works. Using the new hard disk wizard does not work either. I still can not see any Virtual Machines. RPC server unavailable. Unable to establish communication between 'ServerName' and 'ClientName'

  Read the article

• How can I use Linksys WPSM54G print server as a bridge for another machine AND also share the printe

  - by user26453

  I have a Linksys WPMS54G currently sharing a printer via the USB port with the rest of my network via the wireless. Is there any way to set it up so that the ethernet port is bridged over the wireless adapter portion? i.e., be able to uplink another machine or switch into the network via the WPMS54G's ethernet port? Update: The network architecture is as follows: (1) Linksys WRT54G router that serves as a router, DHCP server, and wireless access point for the network. Fairly standard configuration (3) Laptops that are used throughout the house via wifi (1) Linksys WPSM54G printer server that connects via wireless to the router, in a separate room with a printer attached to print seerver's USB port along with (1) Un-networked desktop in the same room Since the printer is plugged into the USB port of the WPSM54G, I am wondering if I can connect the desktop to the ethernet port of the WPSM54G and have it bridged over the wifi to the router. The twist here is that the ethernet is initially used to connect the wireless print server to the router (for configuration, can't configure it wirelessly if you are initially on a encrypted network). Now instead of using that ethernet port as a way to connect the print server to the network (via the router), I want to use the ethernet port as a way to connect another computer to the network, in effect bridging into the router via the print server, while still sharing the printer (attached via USB) through the print server. If this is not clear, please comment. To be clear, the computer I want to connect/bridge into the network does not have a wireless card, is far from the router, and I do not want to lay ethernet cable to connect it. While I could certainly buy a legitimate wireless bridge to accomplish this, I figured since the print server already has an ethernet port, see if I can't use that.

  Read the article

• Cannot connect to my EC2 instance because of "Permission denied (publickey)"

  - by Burak

  In AWS console, I saw that my key pair was deleted. I created a new one with the same name. Then I tried to connect with ssh -v -i sohoKey.pem ec2-user@******.compute-1.amazonaws.com Here's the output: macs-MacBook-Air:~ mac$ ssh -v -i sohoKey.pem ec2-user@******.compute-1.amazonaws.com OpenSSH_5.6p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /etc/ssh_config debug1: Applying options for * debug1: Connecting to ********.compute-1.amazonaws.com [*****] port 22. debug1: Connection established. debug1: identity file sohoKey.pem type -1 debug1: identity file sohoKey.pem-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3 debug1: match: OpenSSH_5.3 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.6 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host '*******.compute-1.amazonaws.com' is known and matches the RSA host key. debug1: Found key in /Users/mac/.ssh/known_hosts:3 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: sohoKey.pem debug1: Authentications that can continue: publickey debug1: Trying private key: sohoKey.pem debug1: read PEM private key done: type RSA debug1: Authentications that can continue: publickey debug1: No more authentication methods to try. Permission denied (publickey). Update: I detached my old EBS and attached to the new instance. Now, how can I mount it?

  Read the article

• Problems configuring DB2 CLI/ODBC System DSN ODBC Data Source Administrator

  - by Komyg

  I am trying to create a System DSN ODBC connection to a DB2 9.5 database, but I am getting a very strange problem. I've looked through the internet and found the following page that has some instructions on how I should proceed: http://www.ryslander.com/how-to-install-and-configure-db2-odbc-driver/. I followed these instructions and I am able to create a new System DSN, however when I try to configure it it seems as if my configurations don't work at all. For example, when I click on the "Configure" button on my System DSN and I add a TCP/IP protocol configuration on the "Advanced Settings" tab and click "Ok", no errors appear, but when I click on "Configure" again my TCP/IP setting has vanished. This happened to all my other configurations, such as database name, username, password etc. Could you help me figure out what I am doing wrong? Note: my user is in the administrator group and I am using a Windows Server 2008 R2 Enterprise x64. UPDATE I managed to create a User DSN and connect to the database. However the problem with the System DSN remains.

  Read the article

• Make Thundirbird use and sync with Gmail Spam facility

  - by Senthil

  I am using Thundirbird 3.1.7. I am using Gmail with it. When I mark a message as spam in Thunderbird, I want it to go to Gmail's spam folder. But it is not happening. The mail is only marked as spam and stays in Gmail's inbox. How can I setup Thunderbird so that when I mark a message as spam in thundirbird, it goes to spam folder in both Thunderbird and Gmail? FYI: I have disabled Thunderbird's own adaptive spam controls so that it doesn't interfere. I am perfectly fine with Gmail's spam facility and don't want Thunderbird to add another layer of spam filtering. Still Thunderbird doesn't send emails to Gmail's spam. Update I figured that dragging and dropping the email to the spam folder in Thunderbird does the job. But is it the same as marking the email as spam in Gmail's interface? i.e. Gmail will do stuff when you mark an email as spam so that it can filter out similar messages in the future. Does it happen when I do this drag and drop thing too? Are they the same?

  Read the article

• Multiple contacts with shared information

  - by Keith Thompson

  Background: I currently have several hundred contacts, synchronized between a Microsoft Exchange server and several mobile devices. I also save exported copies of the contacts in .vcf format. Is there a good way (application, file format, whatever) to maintain contacts with shared information? A very common scenario is that I have contacts for two or more people who live in the same house, for example: John Doe 123 Main Street, Anytown USA Home: 555-555-1111 Work: 555-555-2222 Mobile: 555-555-3333 E-mail: [email protected] Jane Doe 123 Main Street, Anytown USA Home: 555-555-1111 Work: 555-555-4444 Mobile: 555-555-5555 E-mail: [email protected] As you can see, both contacts have the same home address and phone number, but distinct names and work and mobile phone numbers. (Other information might also be either shared or distinct.) The applications and file formats I'm familiar with don't seem to have a good way to deal with this. If I use a single "John & Jane Doe" contact for both, it's difficult to distinguish the distinct information (if I want to call Jane's mobile phone rather than John's). If I use a separate contact for each, I have to remember to update both of them (or all of them for N 2) when they move or change their home phone number. An ideal solution would let me create a record containing information for their household, and have each of their contact records contain a reference to the household record, so that when I view John's contact record I see both shared and distinct information. Is there anything out there that has good support this kind of thing? (I would think there would be, since it's a very common scenario.) (I suppose I could roll my own system that generates merged .vcf files from some extended format, but that wouldn't play well with synchronizing across multiple devices.)

  Read the article

• Configure APE-Server on Ubuntu10.10 webserver

  - by sadmicrowave

  I'm having problems configuring my ape-server. First, I reside behind a corporate firewall where our own DNS servers are maintained. I requested a domain name for my server and was provided uslonsweb003.us.mycompany.com from my IT group. Therefore, my website works and can be accessed via (intranet only) at http://uslonsweb003.us.mycompany.com/test.php. I followed the instructions at ape-project.org and run the Check Tool at the end only to find I get an error stating: Running test : Contacting APE Server (adding frequency) Can't contact APE Server. Please check the folowing url is pointing to your APE server : http://0.uslonsweb003.us.mycompany.com:6969 my /etc/apache2/apache2.conf module looks as follows: <VirtualHost *:80> Servername uslonsweb003.us.mycompany.com ServerAlias ape.uslonsweb003.us.mycompany.com ServerAlias *.ape.uslonsweb003.us.mycompany.com DocumentRoot "/var/www/" </VirtualHost> my /var/www/ape-jsf/Demos/config.js config section looks as follows: APE.Config.baseUrl = 'http://uslonsweb003.us.mycompany.com/ape-jsf'; APE.Config.domain = 'uslonsweb003.us.mycompany.com'; APE.Config.server = 'uslonsweb003.us.mycompany.com:6969'; The instructions at ape-project.org tell me that the APE.Config.server should be `ape.mydomain.com:6969'; but that does not work (I'm assuming because my corporate DNS does not understand the 'ape' before the domain name since 'ape' was not registered with the IT DNS). So therefore, I changed it to what you see above. Please help!! Thanks in advance UPDATE 1 per the installation instructions located on this page http://www.ape-project.org/wiki/index.php/Advanced_APE_configuration under 'Configure your Server/Computer' (I'm running it on a server obviously) It says I need to add some lines to my DNS config file. It sounds like (since I'm within a corporate network) I would ask my IT group to add the following lines to the DNS configuration file on their end: ape IN A x.x.x.x ; IP address of my APE server *.ape IN CNAME ape I just want to make sure this is all I have to have them add (or if this is even correct) before I ask them.

  Read the article

• Cannot Change "Log on through Terminal Services" in Local Security Policy XP from Server 2008 GP

  - by Campo

  This is a mixed AD environment, Server 2003 R2 and 2008 R2 I have a 2003 AD R2 and a 2008 R2 AD. GPO is usually managed from the 2008 R2 machine. I have a RD Gateway on another server as well. I setup the CAP and RAP to allow a normal user to log on to the departments workstation. I also adjusted the GPO for that OU to allow Log on trhough Remote Desktop Gateway for the user group. This worked on my windows 7 workstation. But unfortunately the policy is a different name in XP "allow log on through Terminal Services" I can get through right into the machine but when the log on actually happens to the local machine i get the "Cannot log on interactively" error. This is set in (for the local machine) Secpol.msc Local Security Policy "user rights assignment" but is controlled by the GPO in Computer Configuration Policies Security Settings Local Policies "User Rights Assignment" Do I simply need to adjust the same setting on the same GPO but with a server 2003 GP editor? Feel like that could cause issues... Looking for some direction. Or if anyone has run into this issue yet. UPDATE Should this work? support.microsoft.com/kb/186529 Still seems like I will have the issue as the actual GP settings for Log on through Terminal Services is still different between Server 2008 R2 and 2003 R2.... Another Thought: Should I delete the GPO made for the department and remake it with the 2003 R2 server? I have no 2008 specific settings as the whole department runs XP other than myself. If that's a solution I will move my computer out of the department as a solution... Thoughts?

  Read the article

• mdadm superblock hiding/shadowing partition

  - by Kjell Andreassen

  Short version: Is it safe to do mdadm --zero-superblock /dev/sdd on a disk with a partition (dev/sdd1), filesystem and data? Will the partition be mountable and the data still there? Longer version: I used to have a raid6 array but decided to dismantle it. The disks from the array are now used as non-raid disks. The superblocks were cleared: sudo mdadm --zero-superblock /dev/sdd The disks were repartitioned with fdisk and filesystems created with mfks.ext4. All disks where mounted and everything worked fine. Today, a couple of weeks later, one of the disks is failing to be recognized when trying to mount it, or rather the single partition on it. sudo mount /dev/sdd1 /mnt/tmp mount: special device /dev/sdd1 does not exist fdisk claims there to be a partition on it: sudo fdisk -l /dev/sdd Disk /dev/sdd: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xb06f6341 Device Boot Start End Blocks Id System /dev/sdd1 1 243201 1953512001 83 Linux Of course mount is right, the device /dev/sdd1 is not there, I'm guessing udev did not create it because of the mdadm data still on it: sudo mdadm --examine /dev/sdd /dev/sdd: Magic : a92b4efc Version : 1.2 Feature Map : 0x0 Array UUID : b164e513:c0584be1:3cc53326:48691084 Name : pringle:0 (local to host pringle) Creation Time : Sat Jun 16 21:37:14 2012 Raid Level : raid6 Raid Devices : 6 Avail Dev Size : 3907027120 (1863.02 GiB 2000.40 GB) Array Size : 15628107776 (7452.06 GiB 8001.59 GB) Used Dev Size : 3907026944 (1863.02 GiB 2000.40 GB) Data Offset : 2048 sectors Super Offset : 8 sectors State : clean Device UUID : 3ccaeb5b:843531e4:87bf1224:382c16e2 Update Time : Sun Aug 12 22:20:39 2012 Checksum : 4c329db0 - correct Events : 1238535 Layout : left-symmetric Chunk Size : 512K Device Role : Active device 3 Array State : AA.AAA ('A' == active, '.' == missing) My mdadm --zero-superblock apparently didn't work. Can I safely try it again without losing data? If not, are there any suggestion on what do to? Not starting mdadm at all on boot might be a (somewhat unsatisfactory) solution.

  Read the article

• Failed to connect from slave to master with error "error connecting to master (1045)"

  - by Victor Lin

  I try to setup replication from slave to the master. CHANGE MASTER TO MASTER_HOST = 'master', MASTER_PORT = 3306, MASTER_USER = 'repl', MASTER_PASSWORD = 'xxx'; And I did grant privileges to the user on master. I can connect with mysql command from slave machine to the master mysql -h master -u repl -p mysql> show grants; GRANT RELOAD, SUPER, REPLICATION SLAVE, CREATE USER ON *.* TO 'repl'@'xxx' IDENTIFIED BY PASSWORD 'xxx' mysql> select 1; +---+ | 1 | +---+ | 1 | +---+ 1 row in set (0.04 sec) As you can see, privileges are correct, connection works fine, but however, the connection for replication to master always failed. mysql> show slave status\G *************************** 1. row *************************** Slave_IO_State: Connecting to master Master_Host: master Master_User: repl Master_Port: 3306 Connect_Retry: 60 Master_Log_File: Read_Master_Log_Pos: 4 Relay_Log_File: slave-replay-bin.000002 Relay_Log_Pos: 4 Relay_Master_Log_File: Slave_IO_Running: Connecting Slave_SQL_Running: Yes Replicate_Do_DB: Replicate_Ignore_DB: Replicate_Do_Table: Replicate_Ignore_Table: Replicate_Wild_Do_Table: Replicate_Wild_Ignore_Table: Last_Errno: 0 Last_Error: Skip_Counter: 0 Exec_Master_Log_Pos: 0 Relay_Log_Space: 107 Until_Condition: None Until_Log_File: Until_Log_Pos: 0 Master_SSL_Allowed: No Master_SSL_CA_File: Master_SSL_CA_Path: Master_SSL_Cert: Master_SSL_Cipher: Master_SSL_Key: Seconds_Behind_Master: NULL Master_SSL_Verify_Server_Cert: No Last_IO_Errno: 1045 Last_IO_Error: error connecting to master 'repl@master:3306' - retry-time: 60 retries: 86400 Last_SQL_Errno: 0 Last_SQL_Error: Replicate_Ignore_Server_Ids: Master_Server_Id: 0 1 row in set (0.00 sec) Is this caused by different version of MySQL server? The version of master is 5.0.77, and the slave is 5.5.13. But all articles I could find tell me that it's okay to replicate from a newer slave to old master. How to solve this problem? -- Update -- I even try to upgrade the old MySQL, but still, the problem is not solved. mysql> show slave status\G *************************** 1. row *************************** Slave_IO_State: Connecting to master Master_Host: master Master_User: repl Master_Port: 3306 Connect_Retry: 60 Master_Log_File: master-bin.000007 Read_Master_Log_Pos: 107 Relay_Log_File: slave-replay-bin.000001 Relay_Log_Pos: 4 Relay_Master_Log_File: master-bin.000007 Slave_IO_Running: Connecting Slave_SQL_Running: Yes Replicate_Do_DB: Replicate_Ignore_DB: Replicate_Do_Table: Replicate_Ignore_Table: Replicate_Wild_Do_Table: Replicate_Wild_Ignore_Table: Last_Errno: 0 Last_Error: Skip_Counter: 0 Exec_Master_Log_Pos: 107 Relay_Log_Space: 107 Until_Condition: None Until_Log_File: Until_Log_Pos: 0 Master_SSL_Allowed: No Master_SSL_CA_File: Master_SSL_CA_Path: Master_SSL_Cert: Master_SSL_Cipher: Master_SSL_Key: Seconds_Behind_Master: NULL Master_SSL_Verify_Server_Cert: No Last_IO_Errno: 1045 Last_IO_Error: error connecting to master 'repl@master' - retry-time: 60 retries: 86400 Last_SQL_Errno: 0 Last_SQL_Error: Replicate_Ignore_Server_Ids: Master_Server_Id: 0 1 row in set (0.00 sec)

  Read the article

• Debugging UI Problems in IE8 (Was IE8 on Windows 7 Authentication Mess)

  - by alharaka

  UPDATE: I think the real question I need to ask here is: how does a technician debug UI problems with Internet Explorer, and not HTML rendering issues that have pretty good tools? I am aware of the SysInternals tools and others mentioned below, but maybe I am not harnessing their power properly. Someone else in the TechNet forum I mentioned had a similar issue. Again, I have lots of data, I am not sure how to properly interpret it. ORIGINAL POST: So I tried the venerable Technet Forums to solve this isse. In short, the Windows Security dialog has no place to put credentials, rendering pretty much useless. This happens to apply for a whole bunch of our intranet websites, and only a select number of users with a few laptops have this problem. It ends up looking like this. Things I have tried so far: Disabling local Group Policy (not domain connected) Disabling local Security Policy Resetting IE settings A few system restores Re-registering a bunch of IE DLL's and all other steps here Reinstalling IE8 (dism /online /disable-feature /featurename:"internet-explorer-optional-x86, reboot, dism /online /enable-feature /featurename:"internet-explorer-optional-x86, and reboot) And SFC scan, which found nothing Still, nothing. Not only am I fed up, but I have begun to really work with APIExplorer and Procmon as mentioned in the Technet original because I want to know WHAT is happening, not just fix it. Any thoughts?

  Read the article

• Chunking large rsync transfers?

  - by Gabe Martin-Dempesy

  We use rsync to update a mirror of our primary file server to an off-site colocated backup server. One of the issues we currently have is that our file server has 1TB of mostly smaller files (in the 10-100kb range), and when we're transferring this much data, we often end up with the connection being dropped several hours into the transfer. Rsync doesn't have a resume/retry feature that simply reconnects to the server to pickup where it left off -- you need to go through the file comparison process, which ends up being very length with the amount of files we have. The solution that's recommended to get around is to split up your large rsync transfer into a series of smaller transfers. I've figured the best way to do this is by first letter of the top-level directory names, which doesn't give us a perfectly even distribution, but is good enough. I'd like to confirm if my methodology for doing this is sane, or if there's a more simple way to accomplish the goal. To do this, I iterate through A-Z, a-z, 0-9 to pick a one character $prefix. Initially I was thinking of just running rsync -av --delete --delete-excluded --exclude "*.mp3" "src/$prefix*" dest/ (--exclude "*.mp3" is just an example, as we have a more lengthy exclude list for removing things like temporary files) The problem with this is that any top-level directories in dest/ that are no longer present present on src will not get picked up by --delete. To get around this, I'm instead trying the following: rsync \ --filter 'S /$prefix*' \ --filter 'R /$prefix*' \ --filter 'H /*' \ --filter 'P /*' \ -av --delete --delete-excluded --exclude "*.mp3" src/ dest/ I'm using the show and hide over include and exclude, because otherwise the --delete-excluded will delete anything that doesn't match $prefix. Is this the most effective way of splitting the rsync into smaller chunks? Is there a more effective tool, or a flag that I've missed, that might make this more simple?

  Read the article

• Apache error: could not make child process 25105 exit, attempting to continue anyway

  - by Temnovit

  Hello! I have a web server based on Ubuntu Server 9.10 with this software: apache 2 PHP 5.3 MySQL 5 Python 2.5 Few of my websites are PHP based, few use python/django through mod_wsgi. For month or so, every day my apache server stops responding until I manually restart it. Error logs show: [Fri Mar 05 17:06:47 2010] [error] could not make child process 25059 exit, attempting to continue anyway [Fri Mar 05 17:06:47 2010] [error] could not make child process 25061 exit, attempting to continue anyway [Fri Mar 05 17:06:47 2010] [error] could not make child process 24930 exit, attempting to continue anyway [Fri Mar 05 17:06:47 2010] [error] could not make child process 25084 exit, attempting to continue anyway [Fri Mar 05 17:06:47 2010] [error] could not make child process 25105 exit, attempting to continue anyway and so on. I tried to google this problem but it seems, that I can't find a solution there. How can I determine the cause of this error and how do I fix it? Thank you for your help. UPDATE Updating mod-wsgi to version 3.1 didn't solve the problem Updating PHP to 5.3 also didn't solve it Here is a list of all installed modules: core mod_log_config mod_logio prefork http_core mod_so mod_alias mod_auth_basic mod_authn_file mod_authz_default mod_authz_groupfile mod_authz_host mod_authz_user mod_autoindex mod_cgi mod_deflate mod_dir mod_env mod_mime mod_negotiation mod_php5 mod_rewrite mod_setenvif mod_status mod_wsgi Here's how my virtual host with wsgi looks: <VirtualHost *:80> ServerName example.net DocumentRoot /var/www/example.net #wcgi script that serves all the thing WSGIScriptAlias / /var/www/example.net/index.wsgi WSGIDaemonProcess example user=wsgideamonuser group=root processes=1 threads=10 WSGIProcessGroup example Alias /static /var/www/example.net/static #serving admin files Alias /media/ /usr/local/lib/python2.6/dist-packages/django/contrib/admin/media/ <Location "/static"> SetHandler None </Location> <Location "/media"> SetHandler None </Location> ErrorLog /var/www/example.net/error.log </VirtualHost> Error log now contains two types of errors fallowed one by another: [error] child process 9486 still did not exit, sending a SIGKILL [error] could not make child process 9106 exit, attempting to continue anyway

  Read the article

< Previous Page | 703 704 705 706 707 708 709 710 711 712 713 714  | Next Page >