Search Results

Search found 22267 results on 891 pages for 'org mode'.

Page 727/891 | < Previous Page | 723 724 725 726 727 728 729 730 731 732 733 734  | Next Page >

  • Remove file from git repository (history)

    - by Devenv
    (solved, see bottom of the question body) Looking for this for a long time now, what I have till now is: http://dound.com/2009/04/git-forever-remove-files-or-folders-from-history/ and http://progit.org/book/ch9-7.html Pretty much the same method, but both of them leave objects in pack files... Stuck. What I tried: git filter-branch --index-filter 'git rm --cached --ignore-unmatch file_name' rm -Rf .git/refs/original rm -Rf .git/logs/ git gc Still have files in the pack, and this is how I know it: git verify-pack -v .git/objects/pack/pack-3f8c0...bb.idx | sort -k 3 -n | tail -3 And this: git filter-branch --index-filter "git rm -rf --cached --ignore-unmatch file_name" HEAD rm -rf .git/refs/original/ && git reflog expire --all && git gc --aggressive --prune The same... Tried git clone trick, it removed some of the files (~3000 of them) but the largest files are still there... I have some large legacy files in the repository, ~200M, and I really don't want them there... And I don't want to reset the repository to 0 :( SOLUTION: This is the shortest way to get rid of the files: check .git/packed-refs - my problem was that I had there a refs/remotes/origin/master line for a remote repository, delete it, otherwise git won't remove those files (optional) git verify-pack -v .git/objects/pack/#{pack-name}.idx | sort -k 3 -n | tail -5 - to check for the largest files (optional) git rev-list --objects --all | grep a0d770a97ff0fac0be1d777b32cc67fe69eb9a98 - to check what files those are git filter-branch --index-filter 'git rm --cached --ignore-unmatch file_names' - to remove the file from all revisions rm -rf .git/refs/original/ - to remove git's backup git reflog expire --all --expire='0 days' - to expire all the loose objects (optional) git fsck --full --unreachable - to check if there are any loose objects git repack -A -d - repacking the pack git prune - to finally remove those objects

    Read the article

  • .NET SAP Connection Authentication via WEB Service

    - by mehmet6parmak
    Hi, I am trying to connect to a web service served by SAP and i have authentication problem. I simply added the service by right clicking project, selecting add service reference, giving WSDL url for the service and clicking OK.(After clicking ok asked for credentials and i provided them) Then when i tried to call a method from the serviceclien object i got the error message below: The HTTP request is unauthorized with client authentication scheme 'Anonymous'. The authentication header received from the server was 'Basic realm="SAP Web Application Server <hostname>"'. Web Config Related Part: <basicHttpBinding> <binding name="binding" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00" allowCookies="false" bypassProxyOnLocal="false" hostNameComparisonMode="StrongWildcard" maxBufferSize="65536" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" messageEncoding="Text" textEncoding="utf-8" transferMode="Buffered" useDefaultWebProxy="true"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> <security mode="None"> <transport clientCredentialType="None" proxyCredentialType="None" realm=""> <extendedProtectionPolicy policyEnforcement="Never" /> </transport> <message clientCredentialType="UserName" algorithmSuite="Default" /> </security> </binding> Also, What problems will i face with? I do not want to use SAP .NET Connector. Thanks...

    Read the article

  • How to parse a raw HTTP response?

    - by Ed
    If I have a raw HTTP response as a string: HTTP/1.1 200 OK Date: Tue, 11 May 2010 07:28:30 GMT Expires: -1 Cache-Control: private, max-age=0 Content-Type: text/html; charset=UTF-8 Server: gws X-XSS-Protection: 1; mode=block Connection: close <!doctype html><html>...</html> Is there an easy way I can parse it into an HttpListenerResponse object? Or at least some kind .NET object so I don't have to work with raw responses. What I'm doing currently is extracting the header key/value pairs and setting them on the HttpListenerResponse. But some headers can't be set, and then I have to cut out the body of the response and write it to the OutputStream. But the body could be gzipped, or it could be an image, which I can't get to work yet. And some responses contain random characters everywhere, which looks like an encoding problem. It's a lot of trouble. I'm getting a raw response because I'm using SOCKS to send an HTTP request. The program I'm working on is basically an HTTP proxy that can route requests through a SOCKS proxy, like Privoxy does.

    Read the article

  • part of contact are repeated after each writing the same contact (Android 2.0+)

    - by Bogus
    Hello, I met this problem at writing contacts by API for Android 2.0 or greater. Each time I write the same contact which already exist in my account (Google account) I got some part of contact aggregated ok but other did not. For example fields like FN, N, ORG, TITLE always are in one copy but TEL, EMAIL, ADR are added extra so after 2nd writing the same contact I have 2 copy the same TEL or EMAIL. How to force API engine to not repeate existed data ? Code: ArrayList ops = new ArrayList(); ops.add(ContentProviderOperation.newInsert(ContactsContract.RawContacts.CONTENT_URI) .withValue(ContactsContract.RawContacts.ACCOUNT_TYPE, accountType) .withValue(ContactsContract.RawContacts.ACCOUNT_NAME, accountName) .build()); ... // adding phone number ContentProviderOperation.Builder builder = ContentProviderOperation.newInsert(ContactsContract.Data.CONTENT_URI); builder.withValueBackReference(ContactsContract.Data.RAW_CONTACT_ID, 0); builder.withValue(ContactsContract.Data.MIMETYPE, ContactsContract.CommonDataKinds.Phone.CONTENT_ITEM_TYPE); builder.withValue(ContactsContract.CommonDataKinds.Phone.NUMBER, phoneValue); builder.withValue(ContactsContract.CommonDataKinds.Phone.TYPE, phoneType); // work/home builder.withValue(ContactsContract.CommonDataKinds.Phone.LABEL, phoneLabel); ops.add(builder.build()); ... try { contentResolver.applyBatch(ContactsContract.AUTHORITY, ops); } catch (Exception e) { // } I tried add: AGGREGATION_MODE on AGGREGATION_MODE_DISABLED. but it changed nothing. I will glad for any hint in this case. BR, Bogus

    Read the article

  • How to Global onRouteRequest directly to onBadRequest?

    - by virtualeyes
    EDIT Came up with this to sanitize URI date params prior to passing off to Play router val ymdMatcher = "\\d{8}".r // matcher for yyyyMMdd URI param val ymdFormat = org.joda.time.format.DateTimeFormat.forPattern("yyyyMMdd") def ymd2Date(ymd: String) = ymdFormat.parseDateTime(ymd) override def onRouteRequest(r: RequestHeader): Option[Handler] = { import play.api.i18n.Messages ymdMatcher.findFirstIn(r.uri) map{ ymd=> try { ymd2Date( ymd); super.onRouteRequest(r) } catch { case e:Exception => // kick to "bad" action handler on invalid date Some(controllers.Application.bad(Messages("bad.date.format"))) } } getOrElse(super.onRouteRequest(r)) } ORIGINAL Let's say I want to return a BadRequest result type for all /foo URIs: override def onBadRequest(r: RequestHeader, error: String) = { BadRequest("Bad Request: " + error) } override def onRouteRequest(r: RequestHeader): Option[Handler] = { if(r.uri.startsWith("/foo") onBadRequest("go away") else super.onRouteRequest(r) } Of course does not work, since the expected return type is Option[play.api.mvc.Handler] What's the idiomatic way to deal with this, create a default Application controller method to handle filtered bad requests? Ideally, since I know in onRouteRequest that /foo is in fact a BadRequest, I'd like to call onBadRequest directly. Should note that this is a contrived example, am actually verifying a URI yyyyMMdd date param, and BadRequest-ing if it does not parse to a JodaTime instance -- basically a catch-all filter to sanitize a given date param rather than handling on every single controller method call, not to mention, avoiding cluttering up application log with useless stack traces re: invalid date parse conversions (have several MBs of these junk trace entries accruing daily due to users pointlessly manipulating the uri date in attempts to get at paid subscriber content)

    Read the article

  • How to fix a Sticky Footer that works, but after a browser window is resized, the footer overlaps.

    - by UXdesigner
    Good day, I've been trying to build a perfect footer who sticks at the bottom of the browser window after it's content. And I got help here @ Stack Overflow previously. But after a while, and doing a few tests, found out that after the browser window is resized, and then I scroll down , the footer overlaps...it is causing me a big headache right now and I'd like to fix this so I can move on. I'm going to post the display.css right here: @charset "utf-8"; body, html { margin: 0; padding: 0; text-align: center; position: relative; min-height:100%; /* needed for footer positioning*/ height:100%; /* needed for footer positioning*/ } .spacer { clear: both; height: 0; margin: 0; padding: 0; font-size: 0.1em; } .spacer_left { clear: left; margin: 0 0 10px 0; padding: 0; font-size: 0.1em; } hr { height: 1px; margin: 20px 0 20px 0; border: 0; color: #ccc; background: #ccc; } #container { position:relative; /* needed for footer positioning*/ min-height: 100%;/* needed for footer positioning*/ height: auto !important;/* needed for footer positioning*/ height: 100%;/* needed for footer positioning*/ margin: 0 auto -30px;/* needed for footer positioning*/ width: 1160px; padding: 0; border: 1px solid #333; text-align: left; } #header { margin: 0; padding: 5px; height:70px; } #login { font-family: Arial; font-size: 15px; color:#FFF; text-align: right; width: 440px; margin: 2px; } #login .theInput { font-family: Arial; font-size: 14px; width: 110px; margin-right: 5px; } #login .theSubmit { font-family: Arial; font-size: 10px; background-color: #333333; color: #FFFFFF; margin-right: 5px; } h1#lineainvisible { width:1160px; height:4px; position:relative; margin-top:4px; visibility: inherit; font-family:Arial, Helvetica, sans-serif; font-size:12px; } ul#nav { width:100%; height:36px; display:block; background-color:#000; background-repeat:repeat-x; } #wrapthatbanner { display:block; float:left; width:100%; height:524px; margin-bottom:20px; } #content { margin: 0px 20px 30px 20px; /* needed for footer positioning*/ } .panelsreadmore { margin-right: 10px; text-align:right; } div#content.columns { margin-left: 100px; } #content abbr, #content acronym { cursor: help; border-bottom: 1px dotted; } #content ul { list-style-type: square; margin-left: 75px; } #content ul li, #content ol li { margin: 0 0 0.4em 0; padding: 0; } #content blockquote { width: 75%; margin: 0 auto; padding: 20px; } #contentLeft { float: left; width:580px; } #contentRight { float: right; width:580px; } .sitenote { display:block; padding:6px; border:1px solid #bae2f0; background:#e3f4f9; line-height:130%; font-size:13px; margin-top: 0; margin-right: 0; margin-bottom: 0.5em; margin-left: 0; } #footer, .push /* needed for footer positioning*/ { padding: 5px; clear: both; position:absolute;/* needed for footer positioning*/ bottom:0;/* needed for footer positioning*/ height: -30px;/* needed for footer positioning*/ width:1150px; } And this is the HTML Template File. <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <!-- TemplateBeginEditable name="doctitle" --> <title>Title of Page</title> <!-- TemplateEndEditable --> <!-- TemplateParam name="categoria" type="text" value="home" --> <!-- Meta Tags --> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <!-- Meta Tags - Close --> <!-- CSS Loader - StartsS --> <link href="../css/main-client.css" rel="stylesheet" type="text/css" media="all" /> <!-- CSS Loader - Ends --> <!-- Drop Down Menu --> <link href="../css/dropdown.css" media="screen" rel="stylesheet" type="text/css" /> <link href="../css/default.advanced.css" media="screen" rel="stylesheet" type="text/css" /> <!-- Drop Down Menu - Ends --> <!-- Font Replacement Starts --> <script src="../cufon-yui.js" type="text/javascript"></script> <script src="../AFB_400.font.js" type="text/javascript"></script> <script type="text/javascript"> Cufon.replace('h2'); </script> <script type="text/javascript"> Cufon.replace('h3'); </script> <script type="text/javascript"> Cufon.replace('h4'); </script> <!-- Font Replacement = END --> <!-- Start VisualLightBox.com HEAD section --> <link rel="stylesheet" href="engine/css/vlightbox.css" type="text/css" /> <style type="text/css">#vlightbox a#vlb{display:none}</style> <link rel="stylesheet" href="engine/css/visuallightbox.css" type="text/css" media="screen" /> <script src="engine/js/jquery.min.js" type="text/javascript"></script> <!-- End VisualLightBox.com HEAD section --> <!-- TemplateBeginEditable name="head" --> <!-- TemplateEndEditable --> </head> <body id="@@(categoria)@@"> <div id="container"> <div id="header"> <table width="100%" border="0"> <tr> <td width="67%" height="77px;"><a href="index.html"><img src="../images/Titulos/5.png" alt="" width="257" hspace="10" vspace="10" border="0" id="screen_logo" title=""/></a></td> <td width="33%" valign="top"><form id="login">Log in: <input type="text" class="theInput" name="user" /> <input type="submit" name="Submit" value="Submit" /> </form> </td> </tr> </table> </div> <!-- Aqui es donde empieza fisicamente el menu drop down --> <ul id="nav" class="dropdown dropdown-horizontal"> <li><a href="../index.html">Home</a></li> <li><a href="#" class="dir">Service 1</a></li> <li><a href="#" class="dir">Service 2</a></li> <li><a href="#" class="dir">Service 3</a></li> <li><a href="#" class="dir">Service 4</a></li> <li><a href="#" class="dir">Service 5</a></li> <li><a href="#" class="dir">Service 6</a></li> </ul> <!-- Aqui termina el menu CSS--> <!-- Reset --> <div id="wmfg"> </div> <!-- Reset --> <!-- TemplateBeginEditable name="banner-grande" --> <!-- TemplateEndEditable --> <div id="content"><!-- TemplateBeginEditable name="content" --> <p>&nbsp;</p> <!-- TemplateEndEditable --></div> <div id="footer"><a href="../terms.html">Terms and Conditions</a> |<a href="privacy.html"> Privacy Policy</a><br/> Copyright 2010. .</div> </div> </div> </body> </html> Can somebody take a look at this, and tell me what am I doing wrong ? Thanks in advance.

    Read the article

  • How to catch an expected (and intended) 302 response code with generic XmlHttpRequest?

    - by Anthony
    So, if you look back at my previous question about Exchange Autodiscover, you'll see that the easiet way to get the autodiscover URL is to send a non-secure, non-authenticated GET request to the server, ala: http://autodiscover.exchangeserver.org/autodiscover/autodiscover.xml The server will respond with a 302 redirect with the correct url in the Location header. I'm trying out something really simple at first with a Chrome extension, where I have: if (req.readyState==4 && req.status==302) { return req.getResponseHeader("Location"); } With another ajax call set up with the full XML Post and the user credentials, But instead Chrome hangs at this point, and a look at the developer panel shows that it is not returning back the response but instead is acting like no response was given, meanwhile showing a Uncaught Error: NETWORK_ERR: XMLHttpRequest Exception 101 in the error log. The way I see it, refering to the exact response status is about the same as "catching" it, but I'm not sure if the problem is with Chrome/WebKit or if this is how XHR requests always handle redirects. I'm not sure how to catch this so that I can get still get the headers from the response. Or would it be possible to set up a secondary XHR such that when it gets the 302, it sends a totally different request? Quick Update I just changed it so that it doesn't check the response code: if (req.readyState==4) { return req.getResponseHeader("Location"); } and instead when I alert out the value it's null. and there is still the same error and no response in the dev console. SO it seems like it either doesn't track 302 responses as responses, or something happens after that wipes that response out?

    Read the article

  • How to make Chrome redraw SVG dynamically added content?

    - by Adrian
    I've dynamacally added the circle elements to the svg displayed in a iFrame. Chrome isnt showing the new elements, not tried FF yet. Is there somekind of redraw/refresh I need to call? The first circle is actually in the svg document, the rest come from script. <iframe id="svgFrame" src="xmlfile1.svg" width="300" height="300"> <svg xmlns="http://www.w3.org/2000/svg" id="SVG1" width="200" height="200"> <circle cx="20" cy="20" r="5"/> <circle cx="165" cy="80" r="32"/> <circle cx="15" cy="38" r="32"/> <circle cx="140" cy="39" r="30"/> <circle cx="178" cy="32" r="22"/> ...etc <circle cx="166" cy="130" r="16"/> </svg> </iframe> The javascript which creates the elements: function RandomNumber(min, max) { var r; r = Math.floor(Math.random() * (max - min + 1)) + min; return r; } var svg = document.getElementById("svgFrame").contentDocument; for (var i = 0; i < 99; i++) { var n = svg.createElement("circle"); n.setAttribute("cx" , RandomNumber( 0 , 200) ); n.setAttribute("cy" , RandomNumber(0, 200) ); n.setAttribute("r" , RandomNumber(5, 35) ); svg.documentElement.appendChild(n); }

    Read the article

  • Multiple overlay items in android

    - by Bostjan
    I seem to be having a problem with using ItemizedOverlay and OveralyItems in it. I can get the first overlayItem to appear on the map but not any items after that. Code sample is on: http://www.anddev.org/multiple_overlay_items-t12171.html Quick overview here: public class Markers extends ItemizedOverlay { private Context ctx; private ArrayList<OverlayItem> mOverlays = new ArrayList<OverlayItem>(); public Markers(Drawable defaultMarker, Context cont) { super(boundCenterBottom(defaultMarker)); this.ctx = cont; // TODO Auto-generated constructor stub } @Override protected OverlayItem createItem(int i) { // TODO Auto-generated method stub return mOverlays.get(i); } @Override public boolean onTap(GeoPoint p, MapView mapView) { // TODO Auto-generated method stub return super.onTap(p, mapView); } @Override protected boolean onTap(int index) { // TODO Auto-generated method stub Toast.makeText(this.ctx, mOverlays.get(index).getTitle().toString()+", Latitude: "+mOverlays.get(index).getPoint().getLatitudeE6(), Toast.LENGTH_SHORT).show(); return super.onTap(index); } @Override public int size() { // TODO Auto-generated method stub return mOverlays.size(); } public void addOverlay(OverlayItem item) { mOverlays.add(item); setLastFocusedIndex(-1); populate(); } public void clear() { mOverlays.clear(); setLastFocusedIndex(-1); populate(); }} Markers usersMarker = new Markers(user,overview.this); GeoPoint p = new GeoPoint((int) (lat * 1E6),(int) (lon * 1E6)); OverlayItem item = new OverlayItem(p,userData[0],userData[3]); item.setMarker(this.user); usersMarker.addOverlay(item); The lines after the class are just samples of how it's used the first marker shows up on the map but if I add any more they don't show up? Is there a problem with the populate() method? I tried calling it manually after adding all markers but it still didn't help. Please, if you have any idea what could be wrong, say so.

    Read the article

  • Getting started with Spring 3 Web MVC - Setting everything up

    - by user126379
    Hi, I'm trying to get started with JAVA/Eclipse/Spring MVC but can't seem to find a "dummies" or "step-by-step" guide for setting everything up and creating the simplest proof-of-concept application. I found http://static.springsource.org/docs/...-step-by-step/ but there seem to be differences between Spring 2.5 and Spring 3 so i'm looking for something for Spring 3. Also, the tutorial for Spring 2.5 focuses on building the application usign Ant - This i will certainly be doing for releasing but when working within Eclipse i want to have set up the project so that i can use breakpoints/debugging and this is not covered at all. I've downloaded Eclipse, Tomcat and the Spring 3 Framework but that's about it and within the downloaded Spring Framework documentation it states: 2.3 New getting started tutorial There is now a new getting started tutorial for developing a basic Spring 3.0 MVC web application. This tutorial is a separate document that can be found at the Spring Documentation page However, i can't seem to find such a tutorial on the linked page. My main problem at the moment, as seems to be the case for many people trying to get started with Spring, is that i can't seem to get everything set up. I've got a copy of Expert Spring MVC and Web Flow and i've also found this tutorial but i don't know if the setups they describe are still relevant and whether they will allow debugging. Can anyone please give some direction? Thanks

    Read the article

  • CSS Attribute selector - Match attribute values that begin with

    - by LuckyShot
    I am trying to identify all the <UL> that contain a menu list by defining the ID like this: <ul id="menutop"> <li><a href="#">item1</a></li> <li><a href="#">item2</a></li> <li><a href="#">item3</a></li> </ul> <ul id="menumain"> <li><a href="#">item1</a></li> <li><a href="#">item2</a></li> <li><a href="#">item3</a></li> </ul> As per what I understand, I could use: ul[id|='menu']>li>a {color:#f00;} (<a> direct child of a <li> direct child of an <ul> that has its id starting with menu) But it doesn't work. Searching a bit brought me this [question][1] which suggests that ID is an attribute and not a property so I don't get why it isn't working. What am I doing wrong? Here's a link to the CSS2 Matching attributes and attribute values as per the W3 standards ( http://www.w3.org/TR/CSS2/selector.html#matching-attrs ).

    Read the article

  • Hadoop safemode recovery - taking lot of time

    - by Algorist
    Hi, We are running our cluster on Amazon EC2. we are using cloudera scripts to setup hadoop. On the master node, we start below services. 609 $AS_HADOOP '"$HADOOP_HOME"/bin/hadoop-daemon.sh start namenode' 610 $AS_HADOOP '"$HADOOP_HOME"/bin/hadoop-daemon.sh start secondarynamenode' 611 $AS_HADOOP '"$HADOOP_HOME"/bin/hadoop-daemon.sh start jobtracker' 612 613 $AS_HADOOP '"$HADOOP_HOME"/bin/hadoop dfsadmin -safemode wait' On the slave machine, we run the below services. 625 $AS_HADOOP '"$HADOOP_HOME"/bin/hadoop-daemon.sh start datanode' 626 $AS_HADOOP '"$HADOOP_HOME"/bin/hadoop-daemon.sh start tasktracker' The main problem we are facing is, hdfs safemode recovery is taking more than an hour and this is causing delays in our job completion. Below are the main log messages. 1. domU-12-31-39-0A-34-61.compute-1.internal 10/05/05 20:44:19 INFO ipc.Client: Retrying connect to server: ec2-184-73-64-64.compute-1.amazonaws.com/10.192.11.240:8020. Already tried 21 time(s). 2. The reported blocks 283634 needs additional 322258 blocks to reach the threshold 0.9990 of total blocks 606499. Safe mode will be turned off automatically. The first message is thrown in task trackers log because, job tracker is not started. job tracker didn't start because of hdfs safemode recovery. The second message is thrown during the recovery process. Is there something I am doing wrong? How much time does normal hdfs safemode recovery takes? Will there be any speedup, by not starting task trackers till job tracker is started? Are there any known hadoop problems on amazon cluster? Thanks for your help. Regards Bala Mudiam

    Read the article

  • maven generate eclipse project for custom packaging

    - by Riduidel
    Hi,for a project I'm working on, I've defined a custom maven packaging, and the associated lifecycle (through the definition of a components.xml and the definition of a LifecycleMapping). Obviously, this packaging corresponds to a specific development, for which a plugin has been created in Eclipse. What I would like to do is configure Eclipse according to my pom.xml content. I've obviously looked at Customizable build lifecycle, but I'm more than confused by provided information. From what I understand, I must define in my target project a build plugin, in which i'll add configuration elements specific to my project. As an example, having a configurator called mycompany.mydev.MyEclipseConfigurator, I'll have to write <build> <plugins> <plugin> <groupId>org.maven.ide.eclipse</groupId> <artifactId>lifecycle-mapping</artifactId> <version>0.9.9-SNAPSHOT</version> <configuration> <mappingId>customizable</mappingId> <configurators> <configurator id='mycompany.mydev.MyEclipseConfigurator'/> </configurators> </configuration> </plugin> </plugins> </build> Am I right ?

    Read the article

  • XMPP SASL authentication on Ejabberd with PHP

    - by bucabay
    I'm trying to authenticate with an XMPP server using SASL. /** * Send Authentication, SASL * @return Bool * @param $username String * @param $password String */ function authenticate($username, $password) { $this->username = $username; $this->password = $password; var_dump($username, $password, $this->domain); $auth = base64_encode($username.'@'.$this->domain."\u0000".$username."\u0000".$password); $xml = '<auth mechanism="PLAIN" xmlns="urn:ietf:params:xml:ns:xmpp-sasl">'.$auth.'</auth>'; if ($this->write($xml)) { if ($xml = $this->listen(1, true)) { if (preg_match("/<success/i", $xml)) { $this->authenticated = $this->_sendStream(); } } } $this->events->trigger('authenticate', $this->authenticated); return $this->authenticated; } The XMPP server however responds with: <failure xmlns='urn:ietf:params:xml:ns:xmpp-sasl'><bad-protocol/></failure> This is against an Ejabberd server. When I open the XMPP stream, it advertises: <stream:features><starttls xmlns='urn:ietf:params:xml:ns:xmpp-tls'/><mechanisms xmlns='urn:ietf:params:xml:ns:xmpp-sasl'><mechanism>DIGEST-MD5</mechanism><mechanism>PLAIN</mechanism></mechanisms><register xmlns='http://jabber.org/features/iq-register'/></stream:features> So it seams to me that SASL - PLAIN should work. I have a JavaScript version, that works perfectly on OpenFire server. (I can't test it on Ejabberd at the moment) sendAuthentication: function() { clearTimeout(XMPP.sendAuthentication_timer); var auth = Base64.encode(XMPP.username+'@'+XMPP.domain+'\u0000'+XMPP.username+'\u0000'+XMPP.password); mySocket.events.receive.observe(XMPP.receivedAuthSuccess, function() { mySocket.send('<auth mechanism="PLAIN" xmlns="urn:ietf:params:xml:ns:xmpp-sasl">' + auth + '</auth>'); }); } So I can't get why the PHP version is not working.

    Read the article

  • Wrong number of args passed to: repl$repl

    - by grm
    Hi, I have a trouble with a compojure "Getting started" example that I do not seem to understand. When I run the example from http://weavejester.github.com/compojure/docs/getting-started.html ...I get the following error at the lein repl step: ~/hello-www> lein repl src/hello_www/core.clj Exception in thread "main" java.lang.IllegalArgumentException: Wrong number of args passed to: repl$repl (NO_SOURCE_FILE:0) at clojure.lang.Compiler.eval(Compiler.java:5359) at clojure.lang.Compiler.eval(Compiler.java:5311) at clojure.core$eval__4350.invoke(core.clj:2364) at clojure.main$eval_opt__6502.invoke(main.clj:228) at clojure.main$initialize__6506.invoke(main.clj:247) at clojure.main$script_opt__6526.invoke(main.clj:263) at clojure.main$main__6544.doInvoke(main.clj:347) at clojure.lang.RestFn.invoke(RestFn.java:483) at clojure.lang.Var.invoke(Var.java:381) at clojure.lang.AFn.applyToHelper(AFn.java:180) at clojure.lang.Var.applyTo(Var.java:482) at clojure.main.main(main.java:37) Caused by: java.lang.IllegalArgumentException: Wrong number of args passed to: repl$repl at clojure.lang.AFn.throwArity(AFn.java:439) at clojure.lang.AFn.invoke(AFn.java:43) at clojure.lang.Var.invoke(Var.java:369) at clojure.lang.AFn.applyToHelper(AFn.java:165) at clojure.lang.Var.applyTo(Var.java:482) at clojure.core$apply__3776.invoke(core.clj:535) at leiningen.core$_main__59$fn__61.invoke(core.clj:94) at leiningen.core$_main__59.doInvoke(core.clj:91) at clojure.lang.RestFn.applyTo(RestFn.java:138) at clojure.core$apply__3776.invoke(core.clj:535) at leiningen.core$_main__59.invoke(core.clj:97) at user$eval__67.invoke(NO_SOURCE_FILE:1) at clojure.lang.Compiler.eval(Compiler.java:5343) ... 11 more I have tried both the stable and the developer version of lein without any success. Any ideas on what I could look for next? I get the same result both on linux and cygwin. When I run it manually, it seems to work fine on linux: java -cp "lib/*" clojure.main src/hello_www/core.clj 2010-05-17 19:34:17.280::INFO: Logging to STDERR via org.mortbay.log.StdErrLog 2010-05-17 19:34:17.281::INFO: jetty-6.1.14 2010-05-17 19:34:17.382::INFO: Started [email protected]:8080

    Read the article

  • Could not load type in Custom Profile provider

    - by Cragly
    I am writing a small console application in C# that references a custom assembly that implements custom .net Profile provider. I have added the following sections to my app.config file which references the custom class and assembly. <system.web> <profile defaultProvider="MyCompanyProfileProvider" inherits="MyCompany.Web.User.GenericProfile" automaticSaveEnabled="false"> <providers> <clear/> <add name="MyCompanyProfileProvider" connectionStringName="defaultDatabase" applicationName="/myApplication" type="MyCompany.Web.ProfileProvider, MyCompany.Web"/> </providers> <properties> <add name="JobRoleId" type="System.Int32"/> <add name="LastCompetencyId" type="System.Int32" defaultValue="0"/> <add name="MixSettings" type="System.Xml.XmlDocument"/> </properties> </profile></system.web> However when I run the app in debug mode I get the following error as if it is looking in the System.Web assembly rather than one specified in the app.config file. Could not load type 'MyCompany.Web.User.GenericProfile' from assembly 'System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a'. I have a local web app that also uses the assembly and custom Profile provider and that work without any problems. I have checked the referenced assembly is being copied to the output directory. Any ideas??

    Read the article

  • Which pattern should be used for editing properties with modal view controller on iPhone?

    - by Matthew Daugherty
    I am looking for a good pattern for performing basic property editing via a modal view on the iPhone. Assume I am putting together an application that works like the Contacts application. The "detail" view controller displays all of the contact's properties in a UITableView. When the UITableView goes into edit mode a disclosure icon is displayed in the cells. Clicking a cell causes a modal "editor" view controller to display a view that allows the user to modify the selected property. This view will often contain only a single text box or picker. The user clicks Cancel/Save and the "editor" view is dismissed and the "detail" view is updated. In this scenario, which view is responsible for updating the model? The "editor" view could update the property directly using Key-Value Coding. This appears in the CoreDataBooks example. This makes sense to me on some level because it treats the property as the model for the editor view controller. However, this is not the pattern suggested by the View Controller Programming Guide. It suggests that the "editor" view controller should define a protocol that the "detail" controller adopts. When the user indicates they are done with the edit, the "detail" view controller is called back with the entered value and it dismisses the "editor" view. Using this approach the "detail" controller updates the model. This approach seems problematic if you are using the same "editor" view for multiple properties since there is only a single call-back method. Would love to get some feedback on what approach works best.

    Read the article

  • How to extend an 'unloadable' Rails plugin?

    - by Vitaly Kushner
    I'm trying to write a plugin that will extend InheritedResources. Specifically I want to rewrite some default helpers. And I'd like it to "just work" once installed, w/o any changes to application code. The functionality is provided in a module which needs to be included in a right place. The question is where? :) The first attempt was to do it in my plugin's init.rb: InheritedResources::Base.send :include, MyModule It works in production, but fails miserably in development since InheritedResource::Base declared as unloadable and so its code is reloaded on each request. So my module is there for the first request, and then its gone. InheritedResource::Base is 'pulled' in again by any controller that uses it: Class SomeController < InheritedResource::Base But no code is 'pulling in' my extension module since it is not referenced anywhere except init.rb which is not re-loaded on each request So right now I'm just including the module manually in every controller that needs it which sucks. I can't even include it once in ApplicationController because InheritedResources inherites from it and so it will override any changes back. update I'm not looking for advice on how to 'monkey patch'. The extension is working in production just great. my problem is how to catch moment exactly after InheritedResources loaded to stick my extension into it :) update2 another attempt at clarification: the sequence of events is a) rails loads plugins. my plugin loads after inherited_resources and patches it. b) a development mode request is served and works c) rails unloads all the 'unloadable' code which includes all application code and also inherited_resources d) another request comes in e) rails loads controller, which inherites from inherited resources f) rails loads inherited resources which inherit from application_controller g) rails loads application_contrller (or may be its already loaded at this stage, not sure) g) request fails as no-one loaded my plugin to patch inherited_resources. plugin init.rb files are not reloaded I need to catch the point in time between g and h

    Read the article

  • Perl Curses::UI

    - by user353211
    I am trying to use the library Curses:UI from http://search.cpan.org/dist/Curses-UI/ to build a UI on linux karmic. I can create a simple user interface e.g.: #!usr/usr/bin/perl use strict; use Curses; use Curses::UI; $ui = new Curses::UI(-color_support=1,-clear_on_exit=1,-intellidraw=1); my $window = $ui-add('window', 'Window',intellidraw=1); my $message = $window-add(-text="Hello!",-intellidraw=1); $window-focus(); $ui-mainloop(); Question: I need some way to communicate informatio to the UI i.e. I have a loop which will wait for message to come and change the text in window. Once this message comes a popup will be displayed. Attempt: my $ui = new Curses::UI(-color_support=1,-clear_on_exit=1,-intellidraw=1); my $window = $ui-add('window', 'Window',intellidraw=1); my $message = $window-add(-text="Hello!",-intellidraw=1); pseudocode while(true) #implemented a function to wait { popup($window-text("Hello how are you?")); } $window-focus(); $ui-mainloop(); Problem: The above does not work. I am given a dark screen where my message is displayed. I have read the documentation and when I relocate : $ui-mainloop() above the while loop I am given the user interface but now nothing communicates to the window. Coincise Question: I need some way of displaying the user interface wait for inputs and display messages. Could anyone please help me on this? Thank you!

    Read the article

  • How to read Unicode characters from command-line arguments in Python on Windows

    - by Craig McQueen
    I want my Python script to be able to read Unicode command line arguments in Windows. But it appears that sys.argv is a string encoded in some local encoding, rather than Unicode. How can I read the command line in full Unicode? Example code: argv.py import sys first_arg = sys.argv[1] print first_arg print type(first_arg) print first_arg.encode("hex") print open(first_arg) On my PC set up for Japanese code page, I get: C:\temp>argv.py "PC·??????08.09.24.doc" PC·??????08.09.24.doc <type 'str'> 50438145835c83748367905c90bf8f9130382e30392e32342e646f63 <open file 'PC·??????08.09.24.doc', mode 'r' at 0x00917D90> That's Shift-JIS encoded I believe, and it "works" for that filename. But it breaks for filenames with characters that aren't in the Shift-JIS character set—the final "open" call fails: C:\temp>argv.py Jörgen.txt Jorgen.txt <type 'str'> 4a6f7267656e2e747874 Traceback (most recent call last): File "C:\temp\argv.py", line 7, in <module> print open(first_arg) IOError: [Errno 2] No such file or directory: 'Jorgen.txt' Note—I'm talking about Python 2.x, not Python 3.0. I've found that Python 3.0 gives sys.argv as proper Unicode. But it's a bit early yet to transition to Python 3.0 (due to lack of 3rd party library support). Update: A few answers have said I should decode according to whatever the sys.argv is encoded in. The problem with that is that it's not full Unicode, so some characters are not representable. Here's the use case that gives me grief: I have enabled drag-and-drop of files onto .py files in Windows Explorer. I have file names with all sorts of characters, including some not in the system default code page. My Python script doesn't get the right Unicode filenames passed to it via sys.argv in all cases, when the characters aren't representable in the current code page encoding. There is certainly some Windows API to read the command line with full Unicode (and Python 3.0 does it). I assume the Python 2.x interpreter is not using it.

    Read the article

  • TimoutException occurs over a network but not locally

    - by Gibsnag
    I have a program with three WCF services and when I run them locally (i.e: Server and Clients are all on localhost) everything works. However when I test them across a network I get a TimoutException on two services but not the other. I've disabled the firewalls on all the machines involved in the test. I can both ping the server and access the wsdl "You have created a service" webpage from the client The service that works uses a BasicHttpBinding with streaming and the two which don't work use WSDualHttpBinding. The Services that use WSDualHttpBinding both have CallbackContracts. I apologise for the vagueness of this question but I'm not really sure what code to include or where to even start looking for the solution to this. Non-working bindings: public static Binding CreateHTTPBinding() { var binding = new WSDualHttpBinding(); binding.MessageEncoding = WSMessageEncoding.Mtom; binding.MaxBufferPoolSize = 2147483647; binding.MaxReceivedMessageSize = 2147483647; binding.Security.Mode = WSDualHttpSecurityMode.None; return binding; } Exception Stack Trace: Unhandled Exception: System.TimeoutException: The open operation did not complete within the allotted timeout of 00:01:00. The time allotted to this operation may have been a portion of a longer timeout. Server stack trace: at System.ServiceModel.Channels.ReliableRequestor.ThrowTimeoutException() at System.ServiceModel.Channels.ReliableRequestor.Request(TimeSpan timeout) at System.ServiceModel.Channels.ClientReliableSession.Open(TimeSpan timeout) at System.ServiceModel.Channels.ClientReliableDuplexSessionChannel.OnOpen(TimeSpan timeout) at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout) at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannel.CallOpenOnce.System.ServiceModel.Channels.ServiceChannel.ICallOnce.Call(ServiceChannel channel, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade) at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs) at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation) at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown at [0]: at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) at IDemeService.Register() at DemeServiceClient.Register() at DemeClient.Client.Start() at DemeClient.Program.Main(String[] args)

    Read the article

  • pyscripter Rpyc error

    - by jf328
    pyscripter 2.5.3.0 x64, python 2.7.7 anaconda 2.0.1, windows 7 I was using pyscripter and EPD python happily in 32 bit, no problem. Just changed to 64 bit anaconda version and re-installed everything but now pyscripter cannot import rpyc -- it runs with internal engine (no anaconda), but no such error in pure python. Thanks very much! btw, there is a similar SO post few years ago, but the answer there does not work. *** Python 2.7.3 (default, Apr 10 2012, 23:24:47) [MSC v.1500 64 bit (AMD64)] on win32. *** Internal Python engine is active *** *** Internal Python engine is active *** >>> import rpyc Traceback (most recent call last): File "<interactive input>", line 1, in <module> File "C:\Anaconda\lib\site-packages\rpyc\__init__.py", line 44, in <module> from rpyc.core import (SocketStream, TunneledSocketStream, PipeStream, Channel, File "C:\Anaconda\lib\site-packages\rpyc\core\__init__.py", line 1, in <module> from rpyc.core.stream import SocketStream, TunneledSocketStream, PipeStream File "C:\Anaconda\lib\site-packages\rpyc\core\stream.py", line 7, in <module> import socket File "C:\Anaconda\Lib\socket.py", line 47, in <module> import _socket ImportError: DLL load failed: The specified procedure could not be found. >>> C:\research>python Python 2.7.7 |Anaconda 2.0.1 (64-bit)| (default, Jun 11 2014, 10:40:02) [MSC v.1500 64bit (AMD64)] on win32 Type "help", "copyright", "credits" or "license" for more information. Anaconda is brought to you by Continuum Analytics. Please check out: http://continuum.io/thanks and https://binstar.org >>> import rpyc >>>

    Read the article

  • CSS div/overflow Question: Why does the first HTML file work but not the second?

    - by kidvid
    Notice how the first HTML/CSS works when you re-size the browser horizontally. It will shrink no further than around 800 pixels, but it will expand as far as you drag the right edge of the browser. It will also correctly overflow the table at the top and scroll it horizontally. The thing I don't like about the first code snippet is where the scrollbar is. I want it to show up within the borders of the fieldset, so even if I narrow the browser down to 800 pixels wide, I can see both the left and right sides of the fieldset's border. The second code snippet is exactly the same as the first except I add another div tag to the mix, inside of the field set and around the grid. Notice how the top fieldset's width won't correctly shrink when you make the viewport of your browser narrower. Any ideas on why it doesn't work, what I can do to get it to work like the first code snippet? I don't think I'm describing this clearly, but if you run the two side by side, and expand and contract the horizontal edge of your browser windows, you'll see the differences between the two. I'm pretty new to CSS and HTML layout, so my understanding of why CSS handles sizing the way it does in some situations is still really confusing to me. Thanks, Adrian Working HTML file: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=UTF-8"/> <meta http-equiv="Content-Style-Type" content="text/css"></meta> <style type="text/css"> #divBody { margin-top: 5px; top:24px; margin-top: 10px; } #divContainer { top: 5px; position:relative; min-height:100%; #width:expression(document.body.clientWidth < 830? "800": "90%" ); width:90%; min-width: 800px; padding-bottom:70px; } #divMasterGrid { position:relative; margin:5px; top:5px; width:99%; margin:0 auto; overflow-x:scroll; } #divRadioButtonArea { position:relative; top:20px; height:51px; font-size: 12px; width:99%; margin:5px; } </style> <title>TEST TEST</title> </head> <body id="divBody"> <div id="divContainer" class="gridRegion"> <div id="divMasterGrid"> <fieldset style="margin: 5px;"> <legend style="font-size: 12px; color: #000;">Numbers</legend> <table border="1px"> <tr> <td>One </td> <td>Two </td> <td>Three </td> <td>Fout </td> <td>Five </td> <td>Six </td> <td>Seven </td> <td>Eight </td> <td>Nine </td> <td>Ten </td> <td>Eleven </td> <td>Twelve </td> <td>Thirteen </td> <td>Fourteen </td> <td>Fifteen </td> <td>Sixteen </td> <td>Seventeen </td> <td>Eighteen </td> <td>Nineteen </td> <td>Twenty </td> </tr> </table> </fieldset> </div> <div id="divRadioButtonArea"> <fieldset style=" padding-left: 5px;"> <legend style="color: #000; height:auto">Colors</legend> <table style="width:100%;padding-left:5%;padding-right:5%;"> <tr> <td> <input type="radio" name="A" value="Y"/><label>Red</label> </td> <td> <input type="radio" name="O" value="O"/><label>White</label> </td> <td> <input type="radio" name="W"/><label>Blue</label> </td> </tr> </table> </fieldset> </div> </div> </body> </html> Broken HTML file: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=UTF-8"/> <meta http-equiv="Content-Style-Type" content="text/css"></meta> <style type="text/css"> #divBody { margin-top: 5px; top:24px; margin-top: 10px; } #divContainer { top: 5px; position:relative; min-height:100%; #width:expression(document.body.clientWidth < 830? "800": "90%" ); width:90%; min-width: 800px; padding-bottom:70px; } #divTopFieldSet { position:relative; margin:5px; top:5px; width:99%; } #divRadioButtonArea { position:relative; top:20px; height:51px; font-size: 12px; width:99%; margin:5px; } #divTable { position:relative; width:99%; margin:5px auto; overflow-x:scroll; } </style> <title>TEST TEST</title> </head> <body id="divBody"> <div id="divContainer" class="gridRegion"> <div id="divTopFieldSet"> <fieldset style="margin: 5px;"> <legend style="font-size: 12px; color: #000;">Numbers</legend> <div id="divTable"> <table border="1px"> <tr> <td>One </td> <td>Two </td> <td>Three </td> <td>Fout </td> <td>Five </td> <td>Six </td> <td>Seven </td> <td>Eight </td> <td>Nine </td> <td>Ten </td> <td>Eleven </td> <td>Twelve </td> <td>Thirteen </td> <td>Fourteen </td> <td>Fifteen </td> <td>Sixteen </td> <td>Seventeen </td> <td>Eighteen </td> <td>Nineteen </td> <td>Twenty </td> </tr> </table> </div> </fieldset> </div> <div id="divRadioButtonArea"> <fieldset style=" padding-left: 5px;"> <legend style="color: #000; height:auto">Colors</legend> <table style="width:100%;padding-left:5%;padding-right:5%;"> <tr> <td> <input type="radio" name="A" value="Y"/><label>Red</label> </td> <td> <input type="radio" name="O" value="O"/><label>White</label> </td> <td> <input type="radio" name="W"/><label>Blue</label> </td> </tr> </table> </fieldset> </div> </div> </body> </html>

    Read the article

  • NSMutableURLRequest wont try to use 3G when 3G is not 'connected' in Reachability enumeration

    - by Kyle
    I won't bother posting any code because my code works fine when I launch Safari or something that turns on the 3G connection first. When I put it Airport mode, then put back OFF, I will get the behavior of a connection error saying No internet connection with NSMutableURLRequest. I've personally mailed apple about how the Ant gets turned on and off, and they said anything that uses their base CFSocketStream object will turn on the Ant, and I quote: "such as NSURLRequest".. BSD Sockets do not, just so everyone knows.. However, I assumed NSMutableURLRequest would fall into the category of 'Does', but it seems like it doesnt. It never succeeds for me when I cycle Airport or have the phone idle for a long time. It will ALWAYS succeed when I open any other network app first to turn the Ant on. Shall I be forced to do a dummy NSURLRequest call to turn this on; or has anyone been able to get this class working just fine? Remember this is just an implementation of NSMutableURLRequest to upload a file Async, and no other Network operations are performed anywhere; no ads, no version checks, no nothing.

    Read the article

  • How to upload images from iPhone app developed using Titanium

    - by Karthik.K
    Hi, I finally landed up in developing an iPhone app using Titanium Mobile. Now the problem I face is, Im able to run the app, and the app also sends the image to the server. But Im not able to see the file that got uploaded to the server. I have pasted the iPhone app's code to send image to the server and also, the PHP file that would receive the file from the app. var win = Titanium.UI.currentWindow; var ind=Titanium.UI.createProgressBar({ width:200, height:50, min:0, max:1, value:0, style:Titanium.UI.iPhone.ProgressBarStyle.PLAIN, top:10, message:'Uploading Image', font:{fontSize:12, fontWeight:'bold'}, color:'#888' }); win.add(ind); ind.show(); Titanium.Media.openPhotoGallery({ success:function(event) { Ti.API.info("success! event: " + JSON.stringify(event)); var image = event.media; var xhr = Titanium.Network.createHTTPClient(); xhr.onerror = function(e) { Ti.API.info('IN ERROR ' + e.error); }; xhr.onload = function() { Ti.API.info('IN ONLOAD ' + this.status + ' readyState ' + this.readyState); }; xhr.onsendstream = function(e) { ind.value = e.progress ; Ti.API.info('ONSENDSTREAM - PROGRESS: ' + e.progress+' '+this.status+' '+this.readyState); }; // open the client xhr.open('POST','http://www.myserver.com/tmp/upload2.php'); xhr.setRequestHeader("Connection", "close"); // send the data xhr.send({media:image}); }, cancel:function() { }, error:function(error) { }, allowImageEditing:true }); And here is the PHP code on the server: http://www.pastie.org/891050 I'm not sure where I'm going wrong. Please help me out in this issue. Would love to provide if you need some more information.

    Read the article

< Previous Page | 723 724 725 726 727 728 729 730 731 732 733 734  | Next Page >