Search Results

Search found 28682 results on 1148 pages for 'drop down menu'.

Page 742/1148 | < Previous Page | 738 739 740 741 742 743 744 745 746 747 748 749  | Next Page >

• send music to upnp device from PC

  - by markrich

  I have a new Arcam AirDAC (http://www.arcam.co.uk/products,rSer...ACs,airDAC.htm) attached to my stereo which has upnp support. I would like to send audio from my 14.04 PC to the box itself and to this end installed Rygel upon my system to help but it hasn't. I have created a new sound device in PulseAudioPreferences and selected it from inidcator-sound-switcher but here I become stuck. The sound is heading to the new sound device as the volume can be seen to go up and down from PulseAudioVolumeControl but no sound comes from the stereo downstairs. The problem, as I see it, is the new device has no idea where to send the music as the Arcam hasn't been chosen from any program. So - I installed BubbleUPNP and Plex. My music has been imported into the later and the former can see both the Arcam as a Renderer and the Plex as the Media Server. Installing the BubbleUPNP program on my Android tablet allowed me to send music and all seemed good UNTIL I started playing AIFF and ALAC music and it all stopped. No suitable decoding device. So that scuppered that route. So here I am and stuck. How can I tell Ubuntu to use the Arcam as a renderer to play music through when the albums are played from Rhytmnbox, Tomahawk, Clementine or other? Clementine would be my preferred client as there is a usable remote control program for the tablet. Can anyone help me fix this or advice another way to do what I would like?

  Read the article

• Rack processes taking over CPU under Passenger

  - by pjmorse

  I have a Spree site running the following stack: Nginx 1.0.8 Passenger 3.0.9 Ruby 1.9.2-p290 Rack 1.3.6 Rails 3.1.4 Spree 0.70.5 I recently upgraded from Spree 0.70.3, which also brought a Deface upgrade from 0.7.x to 0.8.0. Since then things have been very unstable. Recently we've seen some CPU-hogging processes which drive load up on the server and grind the whole thing to a stop. They're Rack processes and it looks like Passenger is starting them; they're owned by the site-runner user, an unprivileged user who owns the application code. (Passenger automatically runs the site code as the user who owns it.) If I restart Nginx and kill the runaway processes, it helps for a while, but eventually similar processes return and bog things down again. How can I figure out what's starting these processes, what they're trying to do, and how to stop them?

  Read the article

• Is it safe to use consumer MLC SSDs in a server?

  - by Zypher

  We (and by we I mean Jeff) are looking into the possibility of using Consumer MLC SSD disks in our backup data center. We want to try to keep costs down and usable space up - so the Intel X25-E's are pretty much out at about 700$ each and 64GB of capacity. What we are thinking of doing is to buy some of the lower end SSD's that offer more capacity at a lower price point. My boss doesn't think spending about 5k for disks in servers running out of the backup data center is worth the investment. Just how dangerous of an approach is this and what can be done to mitigate these dangers?

  Read the article

• SAN/NAS with high availability?

  - by netvope

  I have two servers that I plan to use for storage. Each of them has a few SATA disks directly attached. I want the storage to be available even if one of the storage servers is down (preferably the clients wouldn't even notice that the fail-over, although I'm not sure if this is possible). The clients may access the storage via NFS and samba, but this is not a must; I could use something else if needed. I found this guide, Installing and Configuring Openfiler with DRBD and Heartbeat, which apparently does the thing I want. It relies on three components, Openfiler, DRBD, and Heartbeat, and all three of them need to be configured separately. I'm wondering are there simpler solutions? Is using DRBD+Heartbeat the best practice for a situation like mine? I'm also interested to know if there are alternatives that don't depend on DRBD.

  Read the article

• Prevent member of administrator group loging in via Remote Desktop

  - by Chris J

  In order to support some build processes on our Server 2003 development servers, we require a common user account that has administrative privs. Unfortuantly, this also means that anyone that knows the password can also gain admin privs on a server. Assume that trying to keep the password secret is a failed exercise. Developers that need admin privs already have admin privs so should be able to log in as themselves. So the question is a simple one: is there anything I can configure to prevent people (ab)using the account to gain administrator on servers they shouldn't have administrator on? I'm aware that devs could disable anything that is put in place, but that's then down to process and auditing to track and manage. I don't mind where or how: it can be via the local security policy, group policy, a batch file executed in the user's profile, or something else.

  Read the article

• How can I redirect URLs using the proxy module in Apache?

  - by LearningIT

  This seems like a super-basic question but I am having a hard time tracking down a straightforward solution, so appreciate any help and patience with me on this: I want to configure my Apache proxy server to redirect certain URLs so that, for example, a web browser HTTP request for www.olddomain.com gets passed to the proxy server which then routes the request to www.newdomain.com which sends a response to the proxy server which then passes it back to the web browser. Seems so simple, yet I don't see how to achieve this on Apache. I know Squid/Squirm offer this functionality so am guessing I am missing something really basic. I know I can use RewriteRule to dynamically modify the URL and pass it to the proxy server, but I effectively want to do the reverse, whereby the proxy server receives the original URL, applies the RewriteRule, and then forwards the HTTP request to the new URL. Hope that makes sense. Thanks in advance for any help.

  Read the article

• libgdx loading textures fails [duplicate]

  - by Chris

  This question already has an answer here: Why do I get this file loading exception when trying to draw sprites with libgdx? 4 answers I'm trying to load my texture with playerTex = new Texture(Gdx.files.internal("player.jpg")); player.jpg is located under my-gdx-game-android/assets/data/player.jpg I get an exception like this: Full Code: @Override public void create() { camera = new OrthographicCamera(); camera.setToOrtho(false, Gdx.graphics.getWidth(), Gdx.graphics.getHeight()); batch = new SpriteBatch(); FileHandle file = Gdx.files.internal("player.jpg"); playerTex = new Texture(file); player = new Rectangle(); player.x = 800-20; player.y = 250; player.width = 20; player.height = 80; } @Override public void dispose() { // dispose of all the native resources playerTex.dispose(); batch.dispose(); } @Override public void render() { Gdx.gl.glClearColor(1, 1, 1, 1); Gdx.gl.glClear(GL10.GL_COLOR_BUFFER_BIT); camera.update(); batch.setProjectionMatrix(camera.combined); batch.begin(); batch.draw(playerTex, player.x, player.y); batch.end(); if(Gdx.input.isKeyPressed(Keys.DOWN)) player.y -= 50 * Gdx.graphics.getDeltaTime(); if(Gdx.input.isKeyPressed(Keys.UP)) player.y += 50 * Gdx.graphics.getDeltaTime(); }

  Read the article

• Pentium 4 Computer Won't Power Up

  - by Harvey

  I have a faulty Pentium 4 workstation with data that I would like to retrieve. Here are the symptoms & what I've done so far: Machine is totally dead. Motherboard LED is lit but that is the only sign of life. I have replaced the power supply and bypassed the on/off switch. Tried a PC Analyzer motherboard tester but didn't have any power to the card. Unpluggged the P4 cable from the motherboard, hit the on/off switch, the power supply fan comes on and I get codes from the analyzer but nothing that seems to be of any value. Machine does not boot. Will not shut down by hitting the switch. Bad motherboard or could it be a bad CPU cooling fan?

  Read the article

• Bind is updating DNS with wrong resolver info after rndc flush expires

  - by RussH

  I'm running Bind 9 on a small office server (Centos 5) with a local mailserver. There's a domain we need to email - it shows wrong DNS info for the MX servers using the local bind, so an RNDC flush updates this correctly - but then, after some time - it reverts back to the wrong resolver. I would have thought that 'rndc flush' just clears the local cache and pulls all the authoritative info down - so why is it being overwritten (by what seems like the next update)? where do I need to look? Presumably there's some named logging(?) to determine where it's getting the [new or cached] updates from?

  Read the article

• Quicker alternative to gnome-screenshot? (no animation!, quick!, no frills)

  - by humanityANDpeace

  I want to take screenshots in Ubuntu. This is normally no big problem with the standard gnome-screenshot program is working good. But just now I ran into trouble because I need to take a screenshot of some window which appears only for about 0.5 seconds. The Problem is that the gnome-screenshot is using a (from me at least disappreciated animation when used... this fancy thing kind of delays all and I really cannot manage to take the picture..) So what I need is a "no frills" "down to the ground" alternative to the gnome-screenshot. I really disklike the animation - now because it makes me so much trouble. I also hate it that there appears to be no way to disable it after all. Everybody is forced to accept this animation that looks like "a flash light is going on". I am not against being fancy... but this animation in gnome-screenshot is impacting/reducing its functionality. Indeed in my case the shortly appearing window hides when loosing focus. The animaiton -as I assume- triggers the "loosing of focus". So because of the animation I cannot take the screenshot. Anyhow I have looked for "less frills" alternatives and I have found that shutter is a programme that commes with quite some baggage.. But maybe somebody knows a very light-weight programm that serves the very sinple (do nothing else) purpose of just taking a screenshot...

  Read the article

• My Obligatory IPad Post

  - by mark.wilcox

  I've had my IPad for about a week now. So I thought I'd write some thoughts down based on my initial experiences. Here are my initial take-aways: 1 - Netflix OnDemand - I'm a movie junkie. I'm now more apt to just start a movie as background sound for my workday (I telecommute - so except for the occasional bark from my dog, it's awfully quiet here if I don't have something going). 2 - The Email Client is really nice and I'm as fast or faster typing when I have the wireless keyboard engaged. Even with onscreen keyboard - I'm already close to 75% of desktop speed 3 - The battery life is incredible - I think this is the first case where a mobile device actually under-promised on battery 4 - It totally has killed the notion of using a normal PC for my wife and mother-in-law - neither of which had wanted an iPhone/iPod Touch or really any Apple device until they got to play with my iPad. The concept of - instant on, easy to hold and touch-based navigation has them hooked. Heck, it has me hooked. My ultimate goal is to be able to have it at least replace the need to take my netbook with me on the road. I haven't had a chance to complete my testing on that front yet - between work, my wife traveling (for a change) and now my wife home sick - I haven't had time to just play with it. But so far my only regret - that I haven't already bought two more for everyone else in my family who wants to use mine. Posted via email from Virtual Identity Dialogue

  Read the article

• When can I publish a software tool written at work?

  - by AlexMA

  I'm working on a software problem at work that is fairly generic, but I can't find a library I like to solve it, so I'm considering writing one myself (at least a bare-bones version). I'll be writing some if not all of the 1.0 version at work, since I need it for the project. If turns out well I might want to bring the work home and polish it up just for fun, and maybe release it as an open-source project. However, I'm concerned that if I wrote the 1.0 version at work I may not be allowed to do this from a legal sense. Obviously I could ask my boss (who probably won't care), but I'm curious how other programmers have dealt with this issue and where the law stands here. My one sentence question is, When is it okay (legally/ethically) to open-source a software tool originally written by you for work at work? What if you have expanded the original source significantly during off-hours? Follow-up: Suppose I write the whole thing at home on my time then simply use it at work, does that change things drastically? Follow-up 2: Note that I'm not trying to rip off my employer (I understand that they're paying me to build products that they own)--I'm just wondering if there's a fair way of doing this for all involved... It would be nice if some nonprofit down the road could use my code and save them some time. Also, there's another issue at stake. If I write the library for a very simple, generic thing (like HTML tables in Javascript), does that mean I can never again do so on my own time without putting myself at legal risk (even if it was a whole new fresh rewrite or a segment of a larger project). Am I surrendering my right to write code for this sort of project for the rest of my life (without this company's permission), since the code at work might still be somewhere in my brain influencing me? This seems related to software patents, as a side-note.

  Read the article

• Looking for a router with multiple WAN ports and load balancing

  - by Cyrcle

  I'm going to be moving in a few months. The location I'm moving to is great except it's on a road with very few people, so the internet access option is limited to DSL at 1.6Mbps down, 384kbps up. This is much slower than I'm used to. One option is to get at least two of the DSL lines. There's also good possibility that I'll be able to get WiMax or similar. I've been looking around a bit and it seems like what I need is a load balancing router with multiple WAN ports. Can anyone recommend some good ones? I could also go with a small power efficient Linux box with multiple NICs. What would be good software for that? It'd need to be able to handle around 10Mbps. Thanks for any help

  Read the article

• Command to determine whether ZooKeeper Server is Leader or Follower

  - by utrecht

  Introduction A ZooKeeper Quorum consisting of three ZooKeeper servers has been created. The zoo.cfg located on all three ZooKeeper servers looks as follows: maxClientCnxns=50 # The number of milliseconds of each tick tickTime=2000 # The number of ticks that the initial # synchronization phase can take initLimit=10 # The number of ticks that can pass between # sending a request and getting an acknowledgement syncLimit=5 # the directory where the snapshot is stored. dataDir=/var/lib/zookeeper # the port at which the clients will connect clientPort=2181 server.1=ip1:2888:3888 server.2=ip2:2888:3888 server.3=ip3:2888:3888 It is clear that one of the three ZooKeeper servers will become the Leader and the others Followers. If the Leader ZooKeeper server has been shutdown the Leader election will start again. The aim is to check if another ZooKeeper server will become the Leader if the Leader server has been shut down. Question Which command needs to be issued to check whether a ZooKeeper server is a Leader or a Follower?

  Read the article

• ESXi 5.1 - Unable to register host

  - by deanvz

  I download and successfully installed ESXi 5.1. I am however unable to get the licence key I received installed. An error occurred when assigning the specified licence key: The system Memory is not satisfied with the 32 GB of Maximum memory limit. Current with 80.00 GB of Memory. Is there now way around this? A quick google revealed that this is a global problem with no real answer or resolution. The only workaround is to remove the physical RAM chips, but as this is in going to be in production I dont want to do that as it would mean down time when I have to reinsert the memory

  Read the article

• Grub problem - Command prompt

  - by RhZ

  Update: Thanks to all who helped. I gave up and am going to re-install. Not the end of the world, no files will be lost :-) This time will be backing up grub haha. Thanks again, I really appreciate the community's help on this. I was going along fine when the new pae kernel came down, and it had some bug where the sound was all messed up. So I used startup manager to choose the older pae kernel and rebooted. But startupmanager must have fuXXored my grub. When I re-booted, I get thrown directly into memtest and thats it. I tried to re-install grub using the live disc method that I found in many places. That changed something so I get a prompt and the message: "GNU grub version 1.99 ubuntu. Minimal BASH-like editing is supported. Type help for complete list." But then I tried the live CD fix again and now am back at the memtest... What can I do to get my system running again? UPDATE: Just to be clear,when I start up I get a blinking cursor in the top left, and the word 'ON' in the middle of the screen. Then, after a good minute or two, the memtest starts.

  Read the article

• What is the pixel clock setting on my monitor actually doing?

  - by codecowboy

  I am experiencing display interference on a dell 24" flat panel monitor.I find that if I adjust the pixel clock settings up or down in the monitor's on-screen menus, the interference goes away for a while. The monitor is attached to a Macbook Pro using a mini display to VGA adapter. I have found that in a different house, I get the interference problem less so it might be related to electricity supply or possibly even ethernet powerline (total guess). What does the pixel clock setting actually do and does this behaviour point to a likely cause of the interference?

  Read the article

• How to make RewriteCond+RewriteRule change domain2/folder1 to domain1/folder1

  - by gman

  There's actually 2 questions. One is, how do I make RewriteCond+RewriteRule change domain2/folder1 to domain1/folder1 Actually what I want is any domain that tries to access folder1 that is not domain1 gets switched to domain1. So for example domain2.com/domain1/foo - domain1.com/domain1/foo as well as domain3.com/domain1/foo - domain1.com/domain1/foo This is what I tried RewriteCond %{HTTP_HOST} !^domain1\.com$ [NC] RewriteCond %{REQUEST_URI} ^/folder1/ RewriteRule ^/folder1/(.*)$ http://domain1.com/folder1/$1 [L,R=permanent] But that doesn't work. Next I tried some a simpler rule to see if I could narrow down the issue. RewriteCond ${HTTP_HOST} domain2\.com [NC] RewriteRule ^(.*)$ http://google.com/ [L] I though that would make ANY request to domain2.com go to google.com so I tried http://domain2.com/foo but I get domain2.com/foo not google.com If I go to http://domain2.com I get google. Why don't I get there if I go to http://domain2.com/foo? What am I not understanding about mod_rewrite?

  Read the article

• How to determine non-movable files in Windows 7?

  - by David

  Is there a way to determine which unmovable files are preventing Shrink Volume from releasing the full potential free space? Background: I have a 90 GB partition with Windows 7 on it, and 60 GB free space. I want to shrink it down to about 40 GB, and use the reclaimed 50 GB for a separate data partition. The Shrink Volume tool in Disk Management is only willing to give me 8 GB back. My understanding is that this is because of immovable files. I've followed the instructions found here, which involved disabling hibernation, pagefile, system restore, kernal dump, making sure all related files were deleted, and defrag'ing. I have successfully followed those same instructions before on this same drive, and partitoned the original 150 GB space into 90 GB and 60 GB, but I'm not so lucky this time.

  Read the article

• Apache crashing at random intervals. Can not find a reason in log files

  - by Nick Downton

  We are having an issue with a VPS running plesk 9.5 on ubuntu 8.04 At seemingly random intervals Apache will disappear and needs to be started manually. I have checked the apache error log, /var/log/messages, individual virtual host apache error files and cannot find anything that coincides with the time of the failure. dmesg is empty which is a bit odd. We have also had the psa service go down for no apparent reason but apache stay up. I'm at a loss to diagnose this really because all the log files I can find do not point to any issues. Are there any others I can look at? Memory usage sits at about 55% (out of 400mb) and it isn't a particularly high trafficed server. Any pointers as to where else I can find out what is going on would be very much appreciated. Nick

  Read the article

• connection to apache server switches sockets connection

  - by Newben

  I have just post a question but I post an other one because the problem is not the one I had in thought when asking the latter. So, I am running some rails app on osx, when I run rails s, everything works fine. If I shut down the apache server (mamp) and if I run rails s again, I have this message Can't connect to local MySQL server through socket '/Applications/MAMP/tmp/mysql/mysql.sock', which for sure is normal. For info, my mamp server is running, and the connection must pass through /Applications/MAMP/Library/bin/mysql, so I aliased it by setting in my bash profile : alias mysql="/Applications/MAMP/Library/bin/mysql" Now, when I launch a rails generate command type, I get this message : /$root/vendor/bundle/ruby/2.0.0/gems/mysql2-0.3.11/lib/mysql2/client.rb:44:in `connect': Can't connect to local MySQL server through socket '/tmp/mysql.sock' (2) (Mysql2::Error) So how it can be ?

  Read the article

• Windows share mounted then symlinked on LAMP server. Serves up html, but not images.

  - by Samuurai

  This has really got me befuddled... I've mounted a share, like this: //srv1/UserUploads /mount/UserUploads cifs rw,user,exec,uid=wwwrun,gid=www,username=shareuser,password=sharepw 0 0 I then have a symlink here: WEBSVR:/Web/htdocs/public_html # ls -l useruploads lrwxrwxrwx 1 wwwrun www 18 Dec 7 09:18 useruploads -> /mount/UserUploads Oddly, if I ls inside the mounted area, items appear with a capital S -rwxrwSrwx 1 wwwrun www 4077 Dec 30 14:54 prop9.jpg -rwxrwSrwx 1 wwwrun www 4 Jan 12 15:57 test.html And if I bring up test.html in a browser, it works fine, but if I go to prop9.jpg, chrome gives me this error: This web page is not available. The web page at http://10.1.64.100/useruploads/webteam/help2let/prop6-1.jpg might be temporarily down or it may have moved permanently to a new web address. More information on this error Below is the original error message Error 100 (net::ERR_CONNECTION_CLOSED): Unknown error. Has anyone seen this behaviour where the binary files (images) arent displayed, but html/text is?

  Read the article

• Ubunto 12.10 Boots to purple screen

  - by Ric

  I know this question has been tackled in a couple different threads but I've tried what I could from those and have not resolved the issue. I have just a basic understanding of this system so feel free to talk down to me or explain this like you would to a 5 year old. Let's start from the beginning. My son has a computer built by an IT friend of mine (we moved so he can't help any more). It had Windows XP running on it and it just stopped working correctly. This same friend had built a laptop for me with Ubuntu which I liked so I thought I'd put a new OS on my sons computer and it may work better. I downloaded Ubuntu 12.10 onto a USB drive and loaded it onto his computer. I followed all the prompts, it installed, I restarted the computer, it gives me the option of which OS to pick. I pick Ubuntu and it seemingly loads. The desktop comes up with just the basic pinkish Ubuntu background but that is it. There are no icons. I can't right click anywhere to create a file. Left clicking the mouse does not create a square when moved. Alt + F2 doesn't do anything. I can open a terminal but any of the commands I have seen in previous threads do not correct any issues. What else can I do, or what resources are available to fix this problem? I don't know if there are additional files on the USB drive that I need to access or what. Also, one of the problems we were having with my sons computer is that windows would only load to a blank screen. It runs accordingly in safemode and my install of Ubuntu was through safemode of Windows XP.

  Read the article

• Sys.WebForms.PageRequestManagerServerErrorException: An entity object cannot be referenced by multiple instances of IEntityChangeTracker [closed]

  - by Mingebag

  `Story: I have a strange error when I try to save something I got this error message An entity object cannot be referenced by multiple instances of IEntityChangeTracker. I really don’t know what that is and why is it appear, it appears only when I try to save something my insert and update is working, only when I try to save something in db from my Telerik grid if (this.annualVacationList != null) { List<AnnualVacation> vacationToSave = this.annualVacationList; IEnumerable<AnnualVacation> existing = paramUser.AnnualVacations; foreach (AnnualVacation toSave in vacationToSave) { AnnualVacation existingItem = existing.Where(x => x.AnnualVacationId == toSave.AnnualVacationId).SingleOrDefault(); if (existingItem == null) { ctx.AddToAnnualVacations(toSave); } else { existingItem.FromDate = toSave.FromDate; existingItem.ToDate = toSave.ToDate; existingItem.WorkingTime = toSave.WorkingTime; existingItem.VacationDays = toSave.VacationDays; } } } ctx.SaveChanges(); } After debugging I have seen that the code brake down in the Project.Name.Designer.cs ..... O.o public void AddToAnnualVacations(AnnualVacation annualVacation) { base.AddObject("AnnualVacations", annualVacation); }

  Read the article

• Software Manager who makes developers do Project Management

  - by hdman

  I'm a software developer working in an embedded systems company. We have a Project Manager, who takes care of the overall project schedule (including electrical, quality, software and manufacturing) hence his software schedule is very brief. We also have a Software Manager, who's my boss. He makes me write and maintain the software schedule, design documents (high and low level design), SRS, change management, verification plans and reports, release management, reviews, and ofcourse the software. We only have one Test Engineer for the whole software team (10 members), and at any given time, there are a couple of projects going on. I'm spending 80% of my time making these documents. My boss comes from a Process background, and believes what we need is better documentation to improve software: (1) He considers the design to be paramount, coding is "just writing the design down", it shouldn't take too long, and "all the code should be written before the hardware is ready". (2) Doesn't understand the difference between a Central & Distributed Version control, even after we told him its easier to collaborate with a distributed model. (3) Doesn't understand code, and wants to understand every bug and its proposed solution. (4) Believes verification should be done by developer, and validation by the Tester. Thing is though, our verification only checks if implementation is correct (we don't write unit tests, its never considered in the schedule), and validation is black box testing, so the units tests are missing. I'm really confused. (1) Am I responsible for maintaining all these documents? It makes me feel like I'm doing the Software Project Management, in essence. (2) I don't really like creating documents, I want to solve problems and write code. In my experience, creating design documents only helps to an extent, its never the solution to better or faster code. (3) I feel the boss doesn't really care about making better products, but only about being a good manager in the eyes of the management. What can I do?

  Read the article

< Previous Page | 738 739 740 741 742 743 744 745 746 747 748 749  | Next Page >