Search Results

Search found 21644 results on 866 pages for 'connection speed'.

Page 746/866 | < Previous Page | 742 743 744 745 746 747 748 749 750 751 752 753  | Next Page >

  • What is the peak theoretical WiFi G user density? [closed]

    - by Bigbio2002
    I've seen a few WiFi capacity planning questions, and this one is related, but hopefully different enough not to be closed. Also, this is related specifically to 802.11g, but a similar question could be made for N. In order to squeeze more WiFi users into a space, the transmit power on the APs need to be reduced and the APs squeezed closer together. My question is, how far can you practically take this before the network becomes unusable? There will come a point where the transmit power is so weak that nobody will actually be able to pick up a connection, or be constantly roaming to/from APs spaced a few feet apart as they walk around. There are also only 3 available channels to use as well, which is a factor to consider. After determining the peak AP density, then multiply by users-per-AP, which should be easier to find out. After factoring all of this in and running some back-of-the-envelope calculations, I'd like to be able to get a figure of "XX users per 10ft^2" or something. This can be considered the physical limit of WiFi, and will keep people from asking about getting 3,000 people in a ballroom conference on WiFi. Can anyone with WiFi experience chime in, or better yet, provide some calculations for a more accurate figure? Assumptions: Let's assume an ideal environment with no reflection (think of a big, square, open room, with the APs spaced out on a plane), APs are placed on the ceiling so humans won't absorb the waves, and the only interference are from the APs themselves and the devices. As for what devices specifically, that's irrelevant for the first point of the question (AP density, so only channel and transmit power should matter). User experience: Wikipedia states that Wireless G has about 22Mbps maximum effective throughput, or about 2.75MB/s. For the purpose of this question, anything below 100KB/s per user can be deemed to be a poor user experience. As for roaming, I'll assume the user is standing in the same place, so hopefully that will be a non-issue.

    Read the article

  • problems installing mysql and phpmyadmin to localhost

    - by Joel
    Hi guys, I know there have been many similar questions, but as far as I can tell, most of the other people have gotten further than I have... I'm trying to get a WAMP setup happening. I've got PHP and Apache running and talking to each other. PHP is in c:\PHP Apache is in it's default program files folder. mySQL is in it's default install location. I have localhost setup at D:\public_html\ I'm able to navigate to localhost and see html and php files. But I have a simple mySQL test file: <?php // hostname or ip of server (for local testing, localhost should work) $dbServer='localhost'; // username and password to log onto db server $dbUser='root'; $dbPass=''; // name of database $dbName='test'; $link = mysql_connect("$dbServer", "$dbUser", "$dbPass") or die("Could not connect"); print "Connected successfully<br>"; mysql_select_db("$dbName") or die("Could not select database"); print "Database selected successfully<br>"; // close connection mysql_close($link); ?> When I try and open this, I get "could not connect" Now, I haven't even created a database yet, because I can't log into mySQL with phpmyadmin-so I think I've done something wrong in my mySQL install because they aren't talking to each other. I guess my main question is how do I first create a database in mySQL to be sure I have even installed it correctly?

    Read the article

  • Why does my DD-WRT not accept SSH connections from my laptop?

    - by Vlad Seghete
    So, here is my system: I have a 2Wire AT&T modem/router which I use for wireless and a Buffalo router flashed with DD-WRT which is physically attached to the 2Wire and set in the DMZ. I set everything up on the DD-WRT to be able to connect to it using ssh and also so that it forwards ssh requests on a different port to one of the servers behind it. Now, when I am physically connected to the DD-WRT all this works great and as I would want it to. I ssh into the two different ports using the WAN IP of my network, and I get where I expect to land. If, however, I am connected using wi-fi to the 2Wire, the same commands do not work. I do not get an error, simply a timeout. I have trouble understanding this, since the DD-WRT is set in the DMZ and everything should pass to it. To further complicate the problem, I tried connecting to the same IP using my phone (wireless disabled, so really from the WAN) and surprise, it works! If I go back on the local network by enabling the wifi, the ssh connection times out. To make this even stranger, my WAN IP address always responds to pings (meaning in all the above situations). What could be going on here? I know what I should do, completely disable the 2wire as a router and use it strictly as a modem and them use all the routing capabilities of the dd-wrt. It's what I will probably end up doing anyway, but my question remains, because I really want to know what is happening here.

    Read the article

  • Unable to record using Jmeter: [help me very urgent]

    - by krish
    Hi, I am trying to record a http web page using Jmeter 2.3.3 version.I has setup the JMeter proxy and tried, but did n't work. I have followed the below steps. 1. Launch jmeter 2.3.3, added thred group to test plan 2. Under Workbench-add-non-test elements- added HTTP proxy server. proxy server setting are port:9090, target:use recording controller, grouping:donot group samplers, Type:HTTp request and checked the boxes of all under http sampler settings 3.Saved the settings 4. Now in browser(IE 7.0 or firefox 3.0.16), under connection settings, setup the manual proxy settings as local host and port as 9090(no auto detect settings nothing, only manual proxy). Setting saved 5.Now in the jmeter, started the http proxy server. 6. Open a browser and hit the webpage needs to be tested. The page is not opened. In fact because of the changes made in browsers, no pages are opened. Whenever i try hitting a page, the pages are recorded in the Jmeter. but without the page open, how can i test. I looking for an immediate answer and my work is blocked. Immediate answer would be appreciated.

    Read the article

  • Configure IIS site to work with host header & hosts file entry

    - by HarveySaayman
    I'm I bit of an IIS / Web noob (I'm a C# backend service / winforms dev) so please bare with me :-) I've set up a site in IIS on my local dev machine. In the bindings section of the site ive added 4 bindings, all 4 for http: Host Name Port IP Address blog.sourcecube.co.za 26581 * www.blog.sourcecube.co.za 26581 * blog.sourcecube.co.za 26581 127.0.0.1 www.blog.sourcecube.co.za 26581 127.0.0.1 in my hosts file (drivers\etc\hosts), i've added the folling entries: 127.0.0.1 blog.sourcecube.co.za 127.0.0.1 www.blog.sourcecube.co.za when i ping my domain name from the command line it does in fact resolve to the loopback address, 127.0.0.1. So what I'm expecting to happen when i navigate to blog.sourcecube.co.za in my browser is for it to resolve to 127.0.0.1, and when the request hits IIS, it should know which site to serve because of the host header? But when i navigate to blog.sourcecube.co.za, i get an "Unable to connect, Firefox can't establish a connection to the server at blog.sourcecube.co.za" error. What am I doing wrong? --- UPDATE --- Navigating to blog.sourcecube.co.za:26581 from my browser works... I'd like get it working without specifying the port number though.

    Read the article

  • How do I format this regex so it will work in fail2ban?

    - by chapkom
    I've just installed fail2ban on my CentOS server in response to an SSH brute force attempt. The default regular expressions in fail2ban's sshd.conf file do not match any entries in audit.log, which is where SSH seems to be logging all connection attempts, so I am trying to add an expression that will match. The string I am trying to match is as follows: type=USER_LOGIN msg=audit(1333630430.185:503332): user pid=30230 uid=0 auid=500 subj=user_u:system_r:unconfined_t:s0-s0:c0.c1023 msg='acct="root": exe="/usr /sbin/sshd" (hostname=?, addr=<HOST IP>, terminal=sshd res=failed)' The regular expression I am attempting to use is: ^.*addr=<HOST>, terminal=sshd res=failed.*$ I've used regextester.com and regexr to try to build the regex. The testers give me a match for this regex:^.*addr=\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}, terminal=sshd res=failed.*$ but fail2ban-regex complains if I don't use the <HOST> tag in the regex. However, using ^.*addr=<HOST>, terminal=sshd res=failed.*$ gives me 0 matches. At this point, I am totally stuck and I would greatly appreciate any assistance. What am I doing wrong in the regex I am trying to use?

    Read the article

  • Does IIS Sometimes Allocate More Worker Processes Than Configured?

    - by Paul Williams
    We have an IIS 7.5 web service on Windows Server 2008 that handles WCF requests from C# clients. This service is configured to have Maximum Worker Processes = 1, so it is not a web garden. IIS is setup to recycle itself at the same time every day (3 AM). I am trying to debug gnarly connection issues, so I wanted to be sure the application pool was not recycling itself. I configured the pool to log an event when it recycles itself. To my surprise, I see the following entries in the System event log: Level: Information Date/Time: 3/23/2012 3:00:00 AM - Source: WAS - Event ID: 5076 A worker process with process id of '6636' serving application pool 'MyAppPool' has requested a recycle because it reached its scheduled recycle time. Level: Information Date/Time: 3/23/2012 2:59:39 AM - Source: WAS - Event ID: 5076 A worker process with process id of '9364' serving application pool 'MyAppPool' has requested a recycle because it reached its scheduled recycle time. IIS is correctly recycling the application pool at 3 AM. However, I do not understand why I would be getting two recycle events in the log within a few seconds of each other. The maximum number of processes is 1. Does IIS sometimes allocate multiple processes for an application pool that is specified as having 1 process? -- edit -- I connected at about 4 PM today and only saw 1 w3wp.exe process. There are no other event log entries that would indicate a crash.

    Read the article

  • Strange battery behavior on laptop

    - by EpsilonVector
    My laptop is behaving rather strangely lately, and I was hoping to get some idea as to what may be causing such symptoms. The problem: When charging, very minute or so it loses connectivity with the AC adapter for a split second, and regains it back immediately. When this happens the little light that indicates the computer is plugged in does flicker off and back on, but I checked the adapter by replacing the battery on my laptop, and this indeed solves the problem, so it is probably the battery which is at fault, not the adapter (I also tried to move the adapter's wire around just to make sure it had nothing to do with torn wires). I suppose that the obvious solution is to get a new battery, but as far as battery defects go- this is a rather strange one; it loses connection with the adapter, but still powers the computer, and changing the power setting to a balanced plan (was maximum performance) seem to have solved the problem too. Is there a chance this is not simply the battery, but some kind of other electronic defect? And if not, what can cause it to behave so strangely? PS I tried to recalibrate it- didn't help.

    Read the article

  • SSH session becomes unresponsive when logged into Ubuntu Server virtual machine using VirtualBox

    - by nickbart
    Hi everyone, I'm really at my wits end here, so I'm hoping someone here can help me. I have a virtual machine running Ubuntu Server 9.10. It's just a small development environment so I can keep my code separate from the test and production environments. I am running it through VirtualBox 3.1.6 on a laptop running Ubuntu Desktop 9.10. I have it set up with a bridged network connection and it is bridged to my laptop's wireless adapter. We have no wired connections in this office. I boot up the VM and everything is fine. I can SSH into it using gnome-terminal and for a while everything is Kosher. Then seemingly randomly, the SSH terminal session with hang. No error message, nothing; it just becomes unresponsive. If I go to the VirtualBox terminal I find the VM itself is perfectly fine. It can ping and I can SSH out with it. If I restart the networking on the VM the SSH session in my gnome-terminal will most of the time become responsive again. Here's an interesting point, the SSH session will sometimes die right in the middle of me typing something (this points to it not being an idle session issue) and if I go to the VirtualBox terminal and restart the networking and then return to my gnome-terminal SSH session I find that it will come back to life and what I typed when the session hung originally will magically type itself in to the buffer. So, my input is getting stored somewhere and just can't make its way to the VM until the networking on the VM is restarted. I've tried different versions of VirtualBox and used vmdk images and vdi images and nothing seems to work. I can't tell if the problem is with my laptop, VirtualBox, or the Ubuntu Server VDI. Is there anyway to debug this issue? Or has anyone out there seen anything similar? Your help is much appreciated. Nick

    Read the article

  • Unable to record using Jmeter

    - by krish
    Hi, I am trying to record a http web page using Jmeter 2.3.3 version.I has setup the JMeter proxy and tried, but did n't work. I have followed the below steps. Launch jmeter 2.3.3, added thred group to test plan Under Workbench-add-non-test elements- added HTTP proxy server. proxy server setting are port:9090, target:use recording controller, grouping:donot group samplers, Type:HTTp request and checked the boxes of all under http sampler settings Saved the settings Now in browser(IE 7.0 or firefox 3.0.16), under connection settings, setup the manual proxy settings as local host and port as 9090(no auto detect settings nothing, only manual proxy). Setting saved Now in the jmeter, started the http proxy server. Open a browser and hit the webpage needs to be tested. The page is not opened. In fact because of the changes made in browsers, no pages are opened. Whenever i try hitting a page, the pages are recorded in the Jmeter. but without the page open, how can i test. I looking for an immediate answer and my work is blocked. Immediate answer would be appreciated.

    Read the article

  • Postfix message ID originating process?

    - by Anders Braüner Nielsen
    Last night my postfix mail server(Debian Squeeze with dovecot, roundcube, opendkim and spamassassin enabled) started sending out spam from a single domain of mine like these: $cat mail.log|grep D6930B76EA9 Jul 31 23:50:09 myserver postfix/pickup[28675]: D6930B76EA9: uid=65534 from=<[email protected]> Jul 31 23:50:09 myserver postfix/cleanup[27889]: D6930B76EA9: message-id=<[email protected]> Jul 31 23:50:09 myserver postfix/qmgr[7018]: D6930B76EA9: from=<[email protected]>, size=957, nrcpt=1 (queue active) Jul 31 23:50:09 myserver postfix/error[7819]: D6930B76EA9: to=<[email protected]>, relay=none, delay=0.03, delays=0.02/0/0/0, dsn=4.4.2, status=deferred (delivery temporarily suspended: lost connection with mta5.am0.yahoodns.net[66.196.118.33] while sending RCPT TO) The domain in question did not have any accounts enabled but only a catchall alias set through postfixadmin - most emails were send from a specific address I use frequently but some were also sent from bogus addresses. None of the other virtual domains handled by postfix were affected. How can I find out what process was feeding postfix/sendmail or more info on where they originated? As far as I can tell php mail() wasn't used and I've run several open relay tests. I did a little tinkering(removed winbind from the server and ipv6 addresses from main.cf) after the attack and it seems to have subsided but I still have no idea how my server was suddenly sending out spam. Maybe I fixed it - maybe I didn't. Can anyone help figuring out how I was compromised? Anywhere else I should look? I've run Linux Malware Detect on recently changed files but nothing found.

    Read the article

  • IIS replication - Is it possible

    - by Ian
    Hi All, I have a requirement for a client that I have a centralised system that all his satellite branches can work on. Currently this is a ASP.net web forms app running under IIS 7 on win 2008 RC 2 using an SQL backend. The client has now requested that each branch have a local server, so that in the event that the internet connection is down, the branches productivity does not suffer. His other request is that everything can be updated via the central hub and using some mechanism the updates filter down to the individual sites. What are my options here? I see the following as possible options: Multiple redundant internet connections controlled by load balancers SQL replication for the DB (What is better, snapshot, merge or transactional) Roll my own IIS sync service the periodically checks if there is a new version of the web app and downloads it (I hope there are better option than this) Something way better I don’t yet know about (I hope this is the one I need) One of my clients concerns are that the branches are often in very remote areas where everything from technicians to internet is hard to find and very scarce. Any ideas, suggestions, tips etc are welcome. Thanks all

    Read the article

  • All application passwords lost on Windows 7

    - by Rynardt
    A couple of days ago I changed my Windows 7 login password. My laptop is on my company's domain, so password changes are done over the internal network. Since changing the password I noticed that all my saved Chrome passwords are missing. Also Skype, Windows Live, Internet Explorer and Outlook lost their saved passwords. I guess there could be more applications with lost passwords, but I have not opened them yet. This makes me think that most applications saves their passwords to a general password vault on the Windows system and this vault got somehow corrupted when I changed my domain login password for windows. Do anyone have any idea of how to fix this and prevent it from happening again? EDIT : More Info I do development work at the office, so most of the time I bypass the firewall and connect directly to the internet gateway. Now and then I would connect to the company wifi network to do printing and access files on a NAS. So by default my laptop does not connect to the wifi hotspot. On this occasion to update the password, I had to connect to the wifi. So referring to the comment by OmnipotentEntity below, could this have happened when the system rebooted without a connection to the network as the laptop does not auto connect to the wifi hotspot?

    Read the article

  • Archive Manager, SQL 2005 and MaxTokenSize high CPU

    - by Tim Alexander
    So, I posted this question a few days ago: Impact of increasing the MaxTokenSize for Kerberos Tickets Since then the thought was to test our settings on two member servers, one with IIS and one without. I setup two GPOs to configure the MaxTokenSize reg setting to 48000 and MaxFieldLength/MaxRequestBytes to 64200 (based on MS KB2020943, these are set at 4/3 * T + 200). The member server seemed to work ok (a devalued tape backup server). The IIS server however has had some strange repercussions. The IIS Sserver host Quest Software Archive Manager (AM) 4.5 that communicates with SQL Server 2005 Enterprise on Server 2003 R2. After the changes all looked good until the SQL Server hit 100% CPU. I have removed the GPOS, removed the reg values and even replaced them with defaults (12000 for token size and can't remember the other one but was in a blog post about the issue in my other post). No change. Bouncing the IIS Server stops the high CPU and a colleague has looked at the SQL server and it is definitely the AM connection taking up the time/work on the SQL server. I haven't changed the reg values on the SQL server or the DCs but am reluctant to do so without understanding why this has happened. I am guessing its to do with the overriding auth and group issue we have but I am not seeing Kerberos errors in either event log. Has anyone seen something similar or does anyone have some tips? Was definitely blindsided by the Kerberos issue and am swimming against the tide to keep things functioning.

    Read the article

  • Windows 7 Professional Cannot Connect to Share - Wrong password

    - by henryford
    I know that this question has actually been asked a few times before, but every solution I found didn't yield any results on my end, I can't get my head around it: When I am trying to connect to a share on the network, I always get the response "The specified network password is incorrect". However, the password is definetly correct and it works if I connect from another machine. I changed the LAN Manager authentication level to "Send LM & NTLM - use NTLMv2 session security if negiotated", I configured Kerberos encryption types to include all suites, rebooted (several times), but still - no luck. I can connect if I use my regular account with which I am logged in, but I need to connect with a different user since my log-in user has not enough privileges on the share. When I do that, the error above comes up. I'm really frustrated at the moment, this problem is driving me crazy. I'd be gladful for any possible solution to this. At the moment I'm using a workaround: I connect to a different machine via RDP, login with the user I have to use for the network-share connection and then I can map the drive and copy/paste from the RDP session to my local workstation. This is also working when I am connecting via RDP with my current login user and map the drive with the other user who has sufficent privileges. Tanks in advance, Thomas

    Read the article

  • Mounting any Windows share from OS X 10.7.5 suddenly stopped working

    - by user2169619
    I have problem with mounting Windows network shares from my OS X 10.7.5 - it worked but it stopped and nothing helps and nothing in logs. Here what I get when trying to mount it manually: mount -t smbfs //10.0.0.7/d /tmp/test When doing sniffing with tshark - no packet it sent through and I get immediately return from the command: mount_smbfs: server connection failed: Unknown error: -1 Nothing in /var/log/syslog.log and /var/log/kern.log. The Finder does not work either - it throws an error that something is wrong (in czech thus I'm not sending the message here). I just cannot connect to any network shares. In virtual Windows 7 in Parallels Desktop I can connect successfully, but not within the network share (so the Win7 is behind OS X NAT) but only with its own IP address. The Windows server share is on the same network segment connected through switch. Any advice how to debug and what can be wrong? I spent hours to find solution on Google and here but no-one with this kind of problem and I do not know how to further debug it since there is no meaningful log / trace etc. I can ping 10.0.0.7 and I can connect to FTP server on 10.0.0.7 - the Windows machine (XP) has firewall completely turned off. The problem is that with tshark, I'm not seeing any packet sending to 10.0.0.7 so it's not even trying to reach the server.

    Read the article

  • Apache Server not working in MAMP

    - by jasonaburton
    Here's what I did before the problem started: I was creating a database for a site that I am working on in phpMyAdmin. I wrote some code to try to connect to the database I just created and I couldn't connect. I assumed it might be because I needed a password to connect to the database, so I created a password for it. Immediately after I created the password phpMyAdmin kicked me out saying: "#1045 - Access denied for user 'root'@'localhost' (using password: YES)" "phpMyAdmin tried to connect to the MySQL server, and the server rejected the connection. You should check the host, username and password in your configuration and make sure that they correspond to the information given by the administrator of the MySQL server." I found the php.ini file and searched for where I could change the password to match the one I just made, but couldn't find where I needed to change it. So I decided to scrap the database and uninstall MAMP from my computer and reinstall it hoping it would just reset all the defaults and I could go on my merry way. But now after reinstalling MAMP and trying to run the servers Apache won't start up and I have no idea why. One problem after another... Any advice or helpful ideas?

    Read the article

  • How can visiting a webpage infect your computer?

    - by Cybis
    My mother's computer recently became infected with some sort of rootkit. It began when she received an email from a close friend asking her to check out some sort of webpage. I never saw it, but my mother said it was just a blog of some sort, nothing interesting. A few days later, my mother signed in on the PayPal homepage. PayPal gave some sort of security notice which stated that to prevent fraud, they needed some additional personal information. Among some of the more normal information (name, address, etc.), they asked for her SSN and bank PIN! She refused to submit that information and complained to PayPal that they shouldn't ask for it. PayPal said they would never ask for such information and that it wasn't their webpage. There was no such "security notice" when she logged in from a different computer, only from hers. It wasn't a phishing attempt or redirection of some sort, IE clearly showed an SSL connection to https://www.paypal.com/ She remembered that strange email and asked her friend about it - the friend never sent it! Obviously, something on her computer was intercepting the PayPal homepage and that email was the only other strange thing to happen recently. She entrusted me to fix everything. I nuked the computer from orbit since it was the only way to be sure (i.e., reformatted her hard drive and did a clean install). That seemed to work fine. But that got me wondering... my mother didn't download and run anything. There were no weird ActiveX controls running (she's not computer illiterate and knows not to install them), and she only uses webmail (i.e., no Outlook vulnerability). When I think webpages, I think content presentation - JavaScript, HTML, and maybe some Flash. How could that possibly install and execute arbitrary software on your computer? It seems kinda weird/stupid that such vulnerabilities exist.

    Read the article

  • Application runs fine manually but fails as a scheduled task

    - by user42540
    I wasn't sure if this should go here or on stackoverflow. I have an application that loads some files from a network share (the input folder), extracts certain data from them and saves new files (zips them with SharpZLib) on a different network share (output folder). This application runs fine when you open it directly, but when it is set to a scheduled task, it fails in numerous places. This application is scheduled on a Win 2003 server. Let me say right off the bat, the scheduled task is set to use the same login account that I am currently logged in with, so it's not because it's using the LocalSystem account. Something else is going on here. Originally, the application was assigning a drive letter to the input folder using WNetGetConnectionA(). I don't remember why this was done, someone else on our team did that and she's gone now. I think there was some issue with using the WinZip command line with a UNC path. I switched from the WinZip command line utility to using SharpZLib because there were other issues with using the WinZip command line. Anyway, the application failed when trying to assign a drive letter with the error "connection already established." That wasn't true and even after trying WNetCancelConnection(), it still didn't work. Then I decided to just map the drive manually on the server. Then when the app calls Directory.Exists(inputFolderPath) it returns false, even though it does exist. So, for whatever reason, I cannot read this directory from within the application. I can manually navigate to this folder in Windows Explorer and open files. The app log file shows that the user executing it on the schedule is the user I expect, not LocalSystem. Any ideas?

    Read the article

  • Can't find PC on network

    - by Simon Verbeke
    I just got myself a new laptop, and set it up. It is connected to the wireless internet in my home. I then wanted to create a homegroup between the laptop and my desktop, but they can't find each other. Probably because the desktop has a wired connection to the router and the laptop is connected to a wireless access point. The router and the AP are connected to a switch in the middle by cable. A sketch of the network: Laptop - - - Wireless Access Point ----- Switch ----- Router ----- Desktop ^ ^ ^ ^ Wireless Wired Wired Wired They both point to the same gateway and DHCP-server (on 192.168.0.1). And I can ping to that address from both PCs. When I try to ping either of the PCs the pings time out. The subnets are also the same (255.255.255.0) and the IPs are in the same range (192.168.0.114 laptop, 192.168.0.205 desktop). So I don't really understand what I need to do to be able to access either computer from the other. The weird thing is that Synergy (to use mouse and keyboard over the network) works, just by using the IPs assigned to both PCs. The acces point is a linksys WAP54g, but I'm unsure of the Router, it has a custom casing from our ISP and hides any clues for identifying the product. I'm going to google a bit so I can add that info later. Both PC's are Windows 7 64 bit. The desktop is Ultimate, the laptop Professional.

    Read the article

  • Centos iptables configuration for Wordpress and Gmail smtp

    - by Fabrizio
    Let me start off by saying that I'm a Centos newby, so all info, links and suggestions are very welcome! I recently set up a hosted server with Centos 6 and configured it as a webserver. The websites running on it are nothing special, just some low traffic projects. I tried to configure the server as default as possible, but I like it to be secure as well (no ftp, custom ssh port). Getting my Wordpress to run as desired, I'm running into some connection problems. 2 things are not working: installing plugins and updates through ssh2 (failed to connect to localhost:sshportnumber) sending emails from my site using the Gmail smtp (Failed to connect to server: Permission denied (13)) I have the feeling that these are both related to the iptables configuration, because I've tried everything else (I think). I tried opening up the firewall to accept traffic for ports 465 (gmail smtp) and ssh port (lets say this port is 8000), but both the issues remain. Ssh connections from the terminal are working fine though. After each change I tried implementing I restarted the iptables service. This is my iptables configuration (using vim): # Generated by iptables-save v1.4.7 on Sun Jun 1 13:20:20 2014 *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -p tcp -m tcp --dport 8000 -j ACCEPT -A INPUT -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -p tcp -m tcp --dport 465 -j ACCEPT -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -j REJECT --reject-with icmp-host-prohibited -A OUTPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A OUTPUT -o lo -j ACCEPT -A OUTPUT -p tcp -m tcp --dport 8000 -j ACCEPT -A OUTPUT -p tcp -m tcp --dport 465 -j ACCEPT COMMIT # Completed on Sun Jun 1 13:20:20 2014 Are there any (obvious) issues with my iptables setup considering the above mentioned issues? Saying that the firewall is doing exactly nothing in this state is also an answer... And again, if you have any other suggestions for me to increase security (considering the basic things I do with this box), I would love hear it, also the obvious ones! Thanks!

    Read the article

  • Routing table on Linux not respected

    - by MRHaarmann
    I have a very specific problem, building a Linux VPN endpoint (with external VPN Gateway), which should route certain networks over the tunnel, others via default gateway. The Linux VPN should do a NAT on the outgoing connections for the VPN peers. Setup is as following: Internet gateway LAN 192.168.25.1/24 VPN Gateway LAN 10.45.99.2/24 (VPN tunnel 10.45.99.1 to net 87.115.17.40/29, separate connection to Internet) Linux VPN Router eth0 192.168.25.71/24 eth0:503 10.45.99.1/24 Default 192.168.25.1 route to 87.115.17.40/29 via 10.45.99.2 (send_redirects disabled, ip_forward enabled) Linux clients (multiple): eth0 192.168.25.x/24 Default 192.168.25.1 route to 87.115.17.40/29 via 192.168.25.71 Ping to the machines via tunnel from the VPN Router is working. Now I want to establish a routing from my clients over the VPN gateway and the client packet gets routed to 192.168.25.1 ! traceroute output shows the packets get routed to 192.168.25.71, but then to 192.168.25.1. So the route is not respected in forward ! IPTables and Routing: ip route show 87.115.17.40/29 via 10.45.99.2 dev eth0 10.45.99.0/24 dev eth0 proto kernel scope link src 10.45.99.1 192.168.25.0/24 dev eth0 proto kernel scope link src 192.168.25.71 default via 192.168.25.1 dev eth0 iptables -A INPUT -i eth0:503 -j REJECT iptables -t nat -A POSTROUTING -o eth0:503 -j MASQUERADE iptables -A FORWARD -i eth0:503 -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -s 192.168.25.0/24 -o eth0:503 -j ACCEPT So what is wrong with my setup ? The route is chosen correctly from localhost, but all the clients get forwarded to the Internet GW. thanks for helping, Marcus

    Read the article

  • Setting up vsftpd, hangs on list command

    - by Victor
    I installed vsftpd and configured it. When I try to connect to the ftp server using Transmit, it manages to connect but hangs on Listing "/" Then, I get a message stating: Could not retrieve file listing for “/”. Control connection timed out. Does it have anything to do with my iptables? My rules are as listed: *filter # Allows all loopback (lo0) traffic and drop all traffic to 127/8 that doesn't use lo0 -A INPUT -i lo -j ACCEPT -A INPUT ! -i lo -d 127.0.0.0/8 -j REJECT # Accepts all established inbound connections -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT # Allows all outbound traffic # You can modify this to only allow certain traffic -A OUTPUT -j ACCEPT # Allows HTTP and HTTPS connections from anywhere (the normal ports for websites) -A INPUT -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -p tcp -m tcp --dport 443 -j ACCEPT -A INPUT -p tcp -m tcp --dport 21 -j ACCEPT # Allows SSH connections # # THE -dport NUMBER IS THE SAME ONE YOU SET UP IN THE SSHD_CONFIG FILE # -A INPUT -p tcp -m state --state NEW --dport 30000 -j ACCEPT # Allow ping -A INPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT # log iptables denied calls -A INPUT -m limit --limit 5/min -j LOG --log-prefix "iptables denied: " --log-level 7 # Reject all other inbound - default deny unless explicitly allowed policy -A INPUT -j REJECT -A FORWARD -j REJECT COMMIT

    Read the article

  • Setting up squid proxy server to in turn connect using another proxy server [closed]

    - by AnkurVj
    My institute uses the Squid proxy server and authentication mechanism requires username and password to be entered. This means that, I can log in on only one machine at a time and Internet access for me is restricted to that machine. I sometimes require Internet access on multiple machines simultaneously. What previosuly worked for me was the following : On one of my own machines A, I set up a Squid proxy server that allowed all local machines without any username and password. I configured rest of the machines to use this machine A as the proxy server. On machine A I logged into the institute proxy server using my browser. This way, I could access Internet from all my machines, by effectively channeling my requests through the server A. Recently, I lost that machine and configuration and now I tried to set it up again in the same manner. However, I cant seem to remember exactly how I made it work. I keep getting Connection Refused (111) on other machines. My guess is that my squid server isnt able to forward requests from other machines to the actual squid server. I could use any help for debugging this problem. I don't want to use alternatives such as ssh tunneling. This solution has worked for me in the past, I just don't remember how to set it up the same way again.

    Read the article

  • Microsoft Licensing Scenario/Questions [closed]

    - by user17455
    Possible Duplicate: Can you help me with my software licensing question? I am a member of a team developing a third party application (APP) that listens for and services connections from remote devices via TCP. Also, some of these remote devices allow 1 or more users to interact with the remote device. On some of the remote devices, it is impossible for a user to interact with the device. The user/remote device makes no use of any Windows Server service - not DHCP, not IIS, not File Server, not Print Serer, not AD. The remote device's only connection to the Windows Server machine is through the APP's TCP ports. Our company has no interaction with Microsoft. We do not have a Microsoft sales team. Past inquiries have determined that it is cheaper for us to buy Microsoft software (and CALs) retail than to enter into any kind of "arrangement" with Microsoft. I have many questions about SQL Server CALs and Windows Server 2008 CALs. How can I obtain authoritative/legally binding answers? I am not looking for FREE legal advice. I AM looking for FREE advice about who/what/where I can responsibly spend my money to get meaningful information. I fear that passing this on to the local company law firm will just mean that I will be paying them to educate themselves on Microsoft licensing. And if that's like writing code to a new Microsoft API - they are not going to get it right the first time. Going to Microsoft for answers sounds like swimming up to a hungry shark and asking "One leg or two?" I am hoping someone has been down this road before and knows a law firm/lawyer that is experienced in these matters. Any help/suggestion welcome. Thanks.

    Read the article

< Previous Page | 742 743 744 745 746 747 748 749 750 751 752 753  | Next Page >