Search Results

Search found 51100 results on 2044 pages for 'web to print'.

Page 749/2044 | < Previous Page | 745 746 747 748 749 750 751 752 753 754 755 756  | Next Page >

• Windows XP/Firewall -- Can't open UDP port 9100 for JetDirect sharing

  - by Barton Chittenden

  I'm setting up my Dad's laptop (Vista) to print to an HP Deskjet printer attached to a Windows XP Desktop box. The XP box is running Windows firewall. Laptop sits on 192.168.1.66, Desktop 192.168.1.65. I set up logging in the firewall, and determined that it is dropping inbound packets on TCP port 9100, used by JetDirect, the printing protocol. I set up an exception on TCP port 9100, allowing access to the local subnet. There's also an entry under the 'allow applications' tab which was marked for the exact printer model. I selected this as well, then tried to print again... I see more dropped packets from 192.168.1.66 to 192.168.1.65 for TCP port 9100. What do I try next?

  Read the article

• Missing characters when printing in linux

  - by jarvisschultz

  I have a pdf that I was printing recently, and on the final printout there is a single character that doesn't print. It is the greek letter phi, and the pdf was built with pdflatex. The phi shows up in every pdf reader I have tried, and if I convert to a ps using pdftops before printing that solves the problem. Also, I sent the pdf to a buddy who has a very similar machine (Ubuntu 12.04 64 bit, with the same printer drivers), and he was able to print it (to the same printer) and the character showed up. Clearly I have a workaround, but I'm more curious as to where I should be looking to figure out what is causing this bug? What is the printing "toolchain", and where could it be going wrong?

  Read the article

• Context is Hindi when printing line numbers in Word 2007

  - by Lessan Vaezi

  I'm trying to print a Word 2007 document with Line Numbering turned on, and in Word the document looks fine but when I print the document, the line numbers appear in Hindi script. See screenshots here: http://www.lessanvaezi.com/context-is-hindi-when-printing-line-numbers-in-word-2007/ I tried deleting my Normal template and allowing Word to create a new one, and testing using that, with no change. I also tried using different printers. The problem goes away if I choose Arabic instead of Context under Word Options - Advanced - Show Document Content / Numeral. However, I would like to keep this setting as Context. The question is, why is the default context of my document Hindi script? Is there a way to change this context?

  Read the article

• Snow Leopard crashes my Xerox printer

  - by Ho Li Cow

  Just set up 2 brand new iMac 21.5" with OS X 10.6.2 pre-installed in our office. Now whenever we try to print an e-mail out, it re-sets the printer i.e. it switches off, does a POST and prints out a Printer Config page. I can print web pages and from other apps fine, just Apple Mail seems to be suffering. Printer is a Xerox Phaser 7750. I downloaded the drivers it recommended when i first tried printing which didn't help and then also tried downloading from the Xerox site. The latter seemed to install fine but then right at the end, it would say 'Installation Successful', then ask me to choose a printer (it found it fine, both by Bonjour and Raw TCP - i tried both) and then it would give an error message. Any help appreciated.

  Read the article

• How can I automatically convert all source code files in a folder (recursively) to a single PDF with syntax highlighting?

  - by Bentley4

  I would like to convert source code of a few projects to one printable file to save on a usb and print out easily later. How can I do that? Edit First off I want to clarify that I only want to print the non-hidden files and directories(so no contents of .git e.g.). To get a list of all non-hidden files in non-hidden directories in the current directory you can run the find . -type f ! -regex ".*/\..*" ! -name ".*" command as seen as the answer in this thread. As suggested in that same thread I tried making a pdf file of the files by using the command find . -type f ! -regex ".*/\..*" ! -name ".*" ! -empty -print0 | xargs -0 a2ps -1 --delegate no -P pdf but unfortunately the resulting pdf file is a complete mess.

  Read the article

• Can arbitrary email addresses be stored in AD userPrincipalName?

  - by Rob Potter

  I have a web app that is front-ended by ISA, natively authenticating against AD. All users currently log on with sAMAccountName. I would like to allow users to provide a personal email address and be able to authenticate against this instead. From what I understand the AD userPrincipalName is typically used for an internally generated logon name, which by convention, is often their internally generated email address. The web app that I have is web scale (circa 3 million accounts*) and not an internal, corporate app, so the email addresses will be from diverse domains. Can I just set the AD userPrincipalName attribute to the user's email address, and then will ISA natively authenticate against this attribute instead? I heard rumours of AD having a maximum number of domain suffixes that it allows in AD userPrincipalName...? (presumably it catalogues them). [*I realise that AD is not the ideal authentication directory for a user population of this scale.]

  Read the article

• vsftpd, virtual users and permissions. Avoid using chmod 777?

  - by Jakobud

  I am running vsftpd with Virtual Users (managed through a MySQL db). Each users home/default directory is owned by vsftpd:vsftpd. I need to give a user read/write permissions to some website files, owned by apache:apache so they can make some changes. I did a bind mount for the web directory to a directory in the ftp user's home/default directory. When logging in, the user is not able to write to the web folder, unless I set files to 777. Is it possible to set this up with making the directory and it's files 777? The web directory needs to be apache:apache in order for apache to work with it.

  Read the article

• hp laserjet 4200 madness

  - by C-dizzle

  I have an HP LaserJet 4200 printer that is acting really weird. I can print from internet just fine, no problem... but when I try to print from a document used in microsoft word, for example, I always get "Manual Feed Tray 1". I have racked my brain on this and cannot get it figured out. It's a networked printer and only an administrator account can make changes to it, I have also reset the printer back to factory settings, uninstalled and reinstalled onto the pc's and server it is connected to. Running out of hair since I'm pulling it all out... please help.

  Read the article

• How to restrict HTTP Methods

  - by hemalshah

  How can I restrict HTTP methods to those required by the MOSS07 application(s) using IIS6? Update This is what was written in the document IIS6 should be used to restrict HTTP methods to those required by the MOSS07 application(s). I also searched some books and saw something curious in O'Reilly's Sharepoint 2007 by James Pyles and others. There is no real suppported way to use HTTP POST and HTTP GET because of the web.config settings and the static definition of the WSDL. In the web.config <protocols> <remove name="HttpGet"> <remove name="HttpPost"> <remove name="HttpPostLocalHost"> <add name="Documentation"> </protocols> If we do this in the Web.Config file, would it solve the problem?

  Read the article

• Nginx vs Apache as reverse proxy, which one to choose

  - by mhd

  Hi, this kind of question maybe has been asked here but I couldn't find any that really match my question. Heard that nginx performance is quite impressive, but Apache has more docs, community(read:expert) to get help Now what I want to know, how both web servers compare in term of performance, easiness of config, level of customization,etc. AS REVERSE PROXY server in a vps environment?? I'm still weighing between the two for a ruby web app(not ROR) served with thin server. Specific answer will be much appreciated. General answer not touching the ruby part is okay. I'm still noob in web server administration.

  Read the article

• How to connect 2 virtual hosts running on the same machine?

  - by Gabrielle

  I have 2 virtual hosts running on my Windows XP laptop. One is Ubuntu running inside vmware player. The other is MS virtual PC (so I can test with IE6 ). The Ubuntu virtual host is running my web application with apache. I can point my browser on my laptop at the Ubuntu IP and view my web app. I read this post http://stackoverflow.com/questions/197792/how-to-connect-to-host-machine-from-within-virtual-pc-image and was able to get my Virtual PC to ping my physical machine using the loopback adapter. But I'm stuck on getting my Virtual PC to see my web application running in the Ubuntu vmware player host. I appreciate any suggestions.

  Read the article

• Is it possible to install and use a printer in Azure Worker Roles?

  - by lurkerbelow

  I'd like to know if it's possible to create and use a printer in Azure Worker Roles. I do know that I can install printers with basic batch commands. So I could define a batch script that would run as a startup task. something like: rundll32 printui.dll,PrintUIEntry /if /b "printer" /f %windir%\inf\ntprint.inf /r "file:" /m "printername") Question: Can I use a printer to print to file, maybe to local storage? I do need the function to print to file or atleast to have a printer installed, because I have to get the PCL output from different installed printers. Sadly I can not test it by myself. I do not have a CC to join the 90 days trial.

  Read the article

• Why does a Remote Desktop Redirected Printer Doc appear every time I connect to Windows Server 2003 SBS?

  - by Jim Dagg

  I've run into a weird, persistent issue regarding a remote desktop connection. Every time I successfully log into a server running Windows Server 2003 SBS, without taking any further action, after a few seconds a print job spontaneously appears on my machine, titled "Remote Desktop Redirected Printer Doc". The document is 4K, datatype RAW, processor "WinPrint". I've heard of people running into this issue before, but can't seem to hunt down a coherent solution. It's a minor annoyance, but I get annoyed when Windows complains about a print job that, as far as I know, came from nowhere. Any thoughts on why this would occur and how I could prevent it from happening?

  Read the article

• Printing on Windows 8 64-Bit through Windows Server 2008 (32 Bit) RemoteApp

  - by Chris

  We have a network where our server is running on Windows Server 2008 (32 Bit) and a client computer is running on Windows 8.1 (64 bit) with a local printer attached to the client. The printer is an HP P1006. The remote app works well but when trying to print we get an odd "error 545". We have tried both using the "connect client printer" function in remoteapp and also making the printer shared over the network and printing to it via the network from within the remoteapp. Nothing works. We can print a test page from the server to the client computer just fine, but it seems from remoteapp we cannot. We have also tried installing the 32 bit drivers on the 64 bit machine as both the primary and secondary drivers but cannot get them to install. Suggestions please? We've been going crazy over this issue.

  Read the article

• Looking for MRP software

  - by Samuel

  I am looking for MRP software. All the stuff I have found so far looks like it's from the 90's and has that very old person business feel. I want something fresh and new. I would prefer an open source, web based solution. PHP/MySQL would be best but not required. I couldn't find anything that was web based that didn't make me want to cry. Superuser doesn't have a lot of eye candy but it still looks great. I am the web developer at my company so if I don't find anything I will be making it my self (well, try to at least).

  Read the article

• Server 2008 unresponsive after SP2 install.

  - by Dan

  I have a dev server that has an exact image of a production web server. The prod server only has SP1 installed on it. When I first fired up the dev box, the first thing I did was install SP2, and let it be. Almost every morning when I came in, the server was unusable. It would respond to ping, but RDP and the web site running on it were down. On the screen the screen saver was bouncing around, so it wasn't hard locked. But it was unresponsive to keyboard and mouse. So now I have to hard shut it down, but when it comes back up, the only thing in the event viewer is the unexpected shutdown, nothing else. I've since taken a fresh image of my prod box and put it on the dev server, and not installed SP2, and the dev box is humming along perfectly. I should also note that this is Server2k8 Web, 64bit Has anyone else seen anything like this?

  Read the article

• How to configure mspaint on Windows Server 2008R2/ Win 7 to start up with 1-pixel canvas or auto-crop a pasted image?

  - by Fantomas

  I do a lot of screen print capturing, and I have just figured out how to use AutoHotKey to paste screen prints into MsPaint automatically. How to paste Print Screen on MS Paint automatically when press "PrtSc" button ? However, one small problem I have is that ... if I grabbed a screen with Alt-Prt Scr that is only 50x50 pixels, then there would be extra white margin around it, because MSPaint starts out with a larger canvas by default. How can I make it ALWAYS start with 1x1 instead?

  Read the article

• Virtual Network Printer

  - by user113720

  I'm pretty new to Microsoft Servers so don't blame me if the question isn't that smart [I'm a Unix guy]. I need to install a Virtual Printer of a Microsoft Server 2008 r2. The requirements are: The printer must print on a file {whatever file... txt or pdf } The printer must run on a server The printer must accept plaintext from a specific IP:port The connection between the device that prints and the server is a local network I've tried to install a virtual printer, but I cannot specify the constraint about the socket from which receive data to print. Thank you so much

  Read the article

• Nginx save file to local disk

  - by Dean Chen

  My case is: In our China company, we have to access one web server in USA headquarter through Internet. But network is too slow, and we download many big image files. All our developers have to wait. So we want to setup a Nginx which acts as reverse proxy, its upstream is our USA web server. Question is can we make Nginx save the image files from USA web server into its local disk? I mean let Nginx act as one cache server.

  Read the article

• Select firefox search result

  - by Nicolas C.

  I am working on a daily basis on a web application with very large menus. Also doing lots of other Excel manipulations, copy and pasting, etc., I am quite fond of keyboard shortcuts as much faster than using the mouse to point, double-click and then going back to my keyboard etc. Hence, my question is quite simple, does anyone know if there is any shortcut under Firefox which would let me actually select (and not highlight) in my web page the search result so that I can for instance do the following manipulation sequence? [Ctrl]+[F] type the search string, for instance 'regional_unit' the missing shortcut to actually select in my page the string which is currently highlighted thanks to the search feature of FF [Space] or [Enter] key to activate the web element which in my case would systematically correspond to a link or button, etc. May be there would be an addon replacing the default search feature, I don't know... I tried to look over the internet but with the words I am using for this investigation, I do not get relevant search results under Google :(. Thanks a lot

  Read the article

• How to fix incorrect margins when printing from Windows 7?

  - by Rodrigo Guerreiro

  My printer is a HP Photosmart 2575. When I print from my Windows XP the margins are all ok, but when I print from my Windows 7 laptop the top margin is 2x larger for the same document, and as a result the bottom is cropped. I've already found one (http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-and/Deskjet-5150-printer-incorrect-margins-with-Vista-64-bit/td-p/103166) thread in HP forums from someone that seems to have the same problem than me, but no solution is provided. My Windows 7 is the Home Premium x64. Can anyone help me?

  Read the article

• Get an yerror plot without a line in Octave

  - by queueoverflow

  I'd like to print a plot with y-error-bars and just plain points. My current Octave script looks like this: errorbar(x_list, y_list, Delta_y_list, "~.x"); title("physikalisches Pendel"); xlabel("a^2 [m^2]"); ylabel("aT^2 [ms^2]"); print -dpdf plot.pdf The plot I get has a line, although I specified the .x style option: How can I get rid of that line? And the ylabel is in the scale as well, is there some way to fix that?

  Read the article

• printing in linux

  - by Neilvert Noval

  Hello all. I've been a linux user for quite some time. But haven't do printing until now. I just wanna ask how to do printing in linux? I have researched a bit on it. I found some $> echo "print me" > /dev/lp0, but unfortunately, I have no lp0 in my /dev. I don't know if this is the right thing to do. Nevertheless, please tell me of ways on how I can print from my linux box. Here are some details: OS: debian linux 5.0.4 printer: disclosed until it is necessary connection: usb connection So do i need to add a printer first? From the printer manual that I read, this printer model has no linux driver.

  Read the article

• uWSGI and python virtual env

  - by user27512

  I'm trying to use uWSGI with a virtual env in order to use the Trac bug tracker on it. I've installed system-wide uwsgi via pip. Next, I've installed trac in a virtualenv $ virtualenv venv $ . venv/bin/activate $ pip install trac I've then written a simple uWSGI configuration script: [uwsgi] master = true processes = 1 socket = localhost:3032 home = /srv/http/trac/venv/ no-site = true gid = www-data uid = www-data env = TRAC_ENV=/srv/http/trac/projects/my_project module = trac.web.main:dispatch_request But when I try to launch it, it fails: $ uwsgi --http :8000 --ini /etc/uwsgi/vassals-available/my_project.ini --gid www-data --uid www-data ... Set PythonHome to /srv/http/trac/venv/ ... *** Operational MODE: single process *** ImportError: No module named trac.web.main unable to load app 0 (mountpoint='') (callable not found or import error) I think uWSGI isn't using the virtual env. When inside the virtual env, I can import trac.web.main without having an ImportError. How can I do that ? Thanks

  Read the article

• Auto-scaling EC2 Servers and Updating Code

  - by jstats

  We've come to the point where we need to set up autoscaling for our web server and I'm unsure how to go about the process of scaling servers and updating the the existing code without remaking a new AMI and changing the autoscale config to use it. I've read a bit about people bundling the new code and uploading it to s3 and having new servers grab the bundle on boot up but that doesn't seem all that pleasant either. Currently the web app's files live in a git repo, and when we update the code, we push it to github, ssh into the web app and run a hook to bring down the latest code. So I was thinking that another option could be to just run that hook on an hourly or daily cron task. Unfortunately that doesn't cover everything type of update (for example new blog posts' images and such which aren't included in the git repo) but it's something. Could anyone provide some advice on what a common solution is or anything as to why my proposed solution is a bad idea? Thanks all

  Read the article

< Previous Page | 745 746 747 748 749 750 751 752 753 754 755 756  | Next Page >