Search Results

Search found 19915 results on 797 pages for 'software patent'.

Page 787/797 | < Previous Page | 783 784 785 786 787 788 789 790 791 792 793 794  | Next Page >

• Why are my USB 2.0 devices hanging Windows XP?

  - by BenAlabaster

  Background on the machine I'm having a problem with: The machine was inherited and appears to be circa 2003 (there's a date stamp on the power supply which leads me to this conclusion). I've got it set up as a Skype terminal for my 2 year old to keep in touch with her grandparents and other members of the family - which everyone loves. It has a generic ATX motherboard with no identifying markings other than one stamp that says "Rev.B". CPU-Z identifies the motherboard model as VT8601 but doesn't provide me with any manufacturer name. On board it has 1 x 10/100 LAN, 2 x USB 1.0, VGA, PS/2 for KB and mouse, parallel port, 2 x serial ports, 2 x IDE, 1 x floppy, 2 x SDRAM slots, 1 x CPU housing that is seating a 1.3GHz Intel Celeron CPU, 3 x PCI, 1 x AGP - although you can only use 2 of the PCI slots if you use the AGP slot due to the physical layout of the board. It's got 768Mb PC133 SDRAM - 1 x 512Mb & 1 x 256Mb installed as well as a D-LINK WDA-2320 54G Wi-Fi network card and a generic USB 2.0 expansion board containing 3 x external + 1 x internal USB connectors - it has a NEC uPD720102 chipset. It has a DVD+/-RW running as master on IDE1 and a 1.44Mb 3.5" floppy drive connected to the floppy connector. It has an 80Gb Western Digital hard drive running as master on IDE0. All this is sitting in a slimline case. I don't know the wattage of the PSU, but can post this later if this proves to be helpful. The motherboard is running a version of Award BIOS for which I don't have the version number to hand but can again post this later if it would be helpful. The hard disk is freshly formatted and built with Windows XP Professional/Service Pack 3 and is up to date with all current patches. In addition to Windows XP, the only other software it's running is Skype 4.1 (4.2 hangs the whole machine as soon as it starts up, requiring a hard boot to recover). It's got a Daytek MV150 15" touch screen hooked up to the on board VGA and COM1 sockets with the most current drivers from the Daytek website and the most current version of ELO-Touchsystems drivers for the touch component. The webcam is a Logitech Webcam C200 with the latest drivers from the Logitech website. The problem: If I hook any devices to the USB 2.0 sockets, it hangs the whole machine and I have to hard boot it to get it back up. If I have any devices attached to the USB 2.0 sockets when I boot up, it hangs before Windows gets to the login prompt and I have to hard boot it to recover. Workarounds found: I can plug the same devices into the on board USB 1.0 sockets and everything works fine, albeit at reduced performance. I've tried 3 different kinds of USB thumb drives, 3 different makes/models of webcams and my iPhone all with the same effect. They're recognized and don't hang the machine when I hook them to the USB 1.0 but if I hook them to the USB 2.0 ports, the machine hangs within a couple of seconds of recognizing the devices were connected. Attempted solutions: I've seen suggestions that this could be a power problem - that the PSU just doesn't have the wattage to drive these ports. While I'm doubtful this is the problem [after all the motherboard has the same standard connector regardless of the PSU wattage], I tried disabling all the on board devices that I'm not using - on board LAN, the second COM port, the AGP connector etc. through the BIOS in what I'm sure is a futile attempt to reduce the power consumption... I also modified the ACPI and power management settings. It didn't have any noticeable affect, although it didn't do any harm either. Could the wattage of the PSU really cause this problem? If it can, is there anything I need to be aware of when replacing it or do I just need to make sure it's got a higher wattage than the current one? My interpretation was that the wattage only affected the number of drives you could hook up to the power connectors, is that right? I've installed the USB card in another machine and it works without issue, so it's not a problem with the USB card itself, and Windows says the card is installed and working correctly... right up until I connect a device to it. The only thing I haven't done which I only just thought of while writing this essay is trying the USB 2.0 card in a different PCI slot, or re-ordering the wi-fi and USB cards in the slots... although I'm not sure if this will make any difference - does anyone have any experience that would suggest this might work? Other thoughts/questions: Perhaps this is an incompatibility between the USB 2.0 card and the BIOS, would re-flashing the BIOS with a newer version help? Do I need to be able to identify the manufacturer of the motherboard in order to be able to find a BIOS edition specific for this motherboard or will any version of Award BIOS function in its place? Question: Does anyone have any ideas that could help me get my USB 2.0 devices hooked up to this machine? Edit: Updated the USB 2.0 info with reference to actual card - http://www.xpcgear.com/lpnec4u.html

  Read the article

• Java EE 7 Survey Results!

  - by reza_rahman

  On November 8th, the Java EE EG posted a survey to gather broad community feedback on a number of critical open issues. For reference, you can find the original survey here. We kept the survey open for about three weeks until November 30th. To our delight, over 1100 developers took time out of their busy lives to let their voices be heard! The results of the survey were sent to the EG on December 12th. The subsequent EG discussion is available here. The exact summary sent to the EG is available here. We would like to take this opportunity to thank each and every one the individuals who took the survey. It is very appreciated, encouraging and worth it's weight in gold. In particular, I tried to capture just some of the high-quality, intelligent, thoughtful and professional comments in the summary to the EG. I highly encourage you to continue to stay involved, perhaps through the Adopt-a-JSR program. We would also like to sincerely thank java.net, JavaLobby, TSS and InfoQ for helping spread the word about the survey. Below is a brief summary of the results... APIs to Add to Java EE 7 Full/Web Profile The first question asked which of the four new candidate APIs (WebSocket, JSON-P, JBatch and JCache) should be added to the Java EE 7 Full and Web profile respectively. As the following graph shows, there was significant support for adding all the new APIs to the full profile: Support is relatively the weakest for Batch 1.0, but still good. A lot of folks saw WebSocket 1.0 as a critical technology with comments such as this one: "A modern web application needs Web Sockets as first class citizens" While it is clearly seen as being important, a number of commenters expressed dissatisfaction with the lack of a higher-level JSON data binding API as illustrated by this comment: "How come we don't have a Data Binding API for JSON" JCache was also seen as being very important as expressed with comments like: "JCache should really be that foundational technology on which other specs have no fear to depend on" The results for the Web Profile is not surprising. While there is strong support for adding WebSocket 1.0 and JSON-P 1.0 to the Web Profile, support for adding JCache 1.0 and Batch 1.0 is relatively weak. There was actually significant opposition to adding Batch 1. 0 (with 51.8% casting a 'No' vote). Enabling CDI by Default The second question asked was whether CDI should be enabled in Java EE environments by default. A significant majority of 73.3% developers supported enabling CDI, only 13.8% opposed. Comments such as these two reflect a strong general support for CDI as well as a desire for better Java EE alignment with CDI: "CDI makes Java EE quite valuable!" "Would prefer to unify EJB, CDI and JSF lifecycles" There is, however, a palpable concern around the performance impact of enabling CDI by default as exemplified by this comment: "Java EE projects in most cases use CDI, hence it is sensible to enable CDI by default when creating a Java EE application. However, there are several issues if CDI is enabled by default: scanning can be slow - not all libs use CDI (hence, scanning is not needed)" Another significant concern appears to be around backwards compatibility and conflict with other JSR 330 implementations like Spring: "I am leaning towards yes, however can easily imagine situations where errors would be caused by automatically activating CDI, especially in cases of backward compatibility where another DI engine (such as Spring and the like) happens to use the same mechanics to inject dependencies and in that case there would be an overlap in injections and probably an uncertain outcome" Some commenters such as this one attempt to suggest solutions to these potential issues: "If you have Spring in use and use javax.inject.Inject then you might get some unexpected behavior that could be equally confusing. I guess there will be a way to switch CDI off. I'm tempted to say yes but am cautious for this reason" Consistent Usage of @Inject The third question was around using CDI/JSR 330 @Inject consistently vs. allowing JSRs to create their own injection annotations. A slight majority of 53.3% developers supported using @Inject consistently across JSRs. 28.8% said using custom injection annotations is OK, while 18.0% were not sure. The vast majority of commenters were strongly supportive of CDI and general Java EE alignment with CDI as illistrated by these comments: "Dependency Injection should be standard from now on in EE. It should use CDI as that is the DI mechanism in EE and is quite powerful. Having a new JSR specific DI mechanism to deal with just means more reflection, more proxies. JSRs should also be constructed to allow some of their objects Injectable. @Inject @TransactionalCache or @Inject @JMXBean etc...they should define the annotations and stereotypes to make their code less procedural. Dog food it. If there is a shortcoming in CDI for a JSR fix it and we will all be grateful" "We're trying to make this a comprehensive platform, right? Injection should be a fundamental part of the platform; everything else should build on the same common infrastructure. Each-having-their-own is just a recipe for chaos and having to learn the same thing 10 different ways" Expanding the Use of @Stereotype The fourth question was about expanding CDI @Stereotype to cover annotations across Java EE beyond just CDI. A significant majority of 62.3% developers supported expanding the use of @Stereotype, only 13.3% opposed. A majority of commenters supported the idea as well as the theme of general CDI/Java EE alignment as expressed in these examples: "Just like defining new types for (compositions of) existing classes, stereotypes can help make software development easier" "This is especially important if many EJB services are decoupled from the EJB component model and can be applied via individual annotations to Java EE components. @Stateless is a nicely compact annotation. Code will not improve if that will have to be applied in the future as @Transactional, @Pooled, @Secured, @Singlethreaded, @...." Some, however, expressed concerns around increased complexity such as this commenter: "Could be very convenient, but I'm afraid if it wouldn't make some important class annotations less visible" Expanding Interceptor Use The final set of questions was about expanding interceptors further across Java EE... A very solid 96.3% of developers wanted to expand interceptor use to all Java EE components. 35.7% even wanted to expand interceptors to other Java EE managed classes. Most developers (54.9%) were not sure if there is any place that injection is supported that should not support interceptors. 32.8% thought any place that supports injection should also support interceptors. Only 12.2% were certain that there are places where injection should be supported but not interceptors. The comments reflected the diversity of opinions, generally supportive of interceptors: "I think interceptors are as fundamental as injection and should be available anywhere in the platform" "The whole usage of interceptors still needs to take hold in Java programming, but it is a powerful technology that needs some time in the Sun. Basically it should become part of Java SE, maybe the next step after lambas?" A distinct chain of thought separated interceptors from filters and listeners: "I think that the Servlet API already provides a rich set of possibilities to hook yourself into different Servlet container events. I don't find a need to 'pollute' the Servlet model with the Interceptors API"

  Read the article

• CodePlex Daily Summary for Wednesday, September 05, 2012

  CodePlex Daily Summary for Wednesday, September 05, 2012Popular ReleasesDesktop Google Reader: 1.4.6: Sorting feeds alphabetical is now optional (see preferences window)DotNetNuke® Community Edition CMS: 06.02.03: Major Highlights Fixed issue where mailto: links were not working when sending bulk email Fixed issue where uses did not see friendship relationships Problem is in 6.2, which does not show in the Versions Affected list above. Fixed the issue with cascade deletes in comments in CoreMessaging_Notification Fixed UI issue when using a date fields as a required profile property during user registration Fixed error when running the product in debug mode Fixed visibility issue when...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.65: Fixed null-reference error in the build task constructor.BLACK ORANGE: HPAD TEXT EDITOR 0.9 Beta: HOW TO RUN THE TEXT EDITOR Download the HPAD ARCHIVED FILES which is in .rar format Extract using Winrar Make sure that extracted files are in the same folder Double-Click on HPAD.exe application fileTelerikMvcGridCustomBindingHelper: Version 1.0.15.247-RC2: TelerikMvcGridCustomBindingHelper 1.0.15.247 RC2 Release notes: This is a RC version (hopefully the last one), please test and report any error or problem you encounter. This release is all about performance and fixes Support: "Or" and "Does Not contain" filter options Improved BooleanSubstitutes, Custom Aggregates and expressions-to-queryover Add EntityFramework examples in ExampleWebApplication Many other improvements and fixes Fix invalid cast on CustomAggregates Support for ...ServiceMon - Extensible Real-time, Service Monitoring Utility: ServiceMon Release 0.9.0.44: Auto-uploaded from build serverJavaScript Grid: Release 09-05-2012: Release 09-05-2012xUnit.net Contrib: xunitcontrib-dotCover 0.6.1 (dotCover 2.1 beta): xunitcontrib release 0.6.1 for dotCover 2.1 beta This release provides a test runner plugin for dotCover 2.1 beta, targetting all versions of xUnit.net. (See the xUnit.net project to download xUnit.net itself.) This release adds support for running xUnit.net tests to dotCover 2.1 beta's Visual Studio plugin. PLEASE NOTE: You do NOT need this if you also have ReSharper and the existing 0.6.1 release installed. DotCover will use ReSharper's test runners if available. This release includes th...B INI Sharp Library: B INI Sharp Library v1.0.0.0 Realsed: The frist realsedActive Forums for DotNetNuke CMS: Active Forums 5.0.0 RC: RC release of Active Forums 5.0.Droid Explorer: Droid Explorer 0.8.8.7 Beta: Bug in the display icon for apk's, will fix with next release Added fallback icon if unable to get the image/icon from the Cloud Service Removed some stale plugins that were either out dated or incomplete. Added handler for *.ab files for restoring backups Added plugin to create device backups Backups stored in %USERPROFILE%\Android Backups\%DEVICE_ID%\ Added custom folder icon for the android backups directory better error handling for installing an apk bug fixes for the Runn...BI System Monitor: v2.1: Data Audits report and supporting SQL, and SSIS package Environment Overview report enhancements, improving the appearance, addition of data audit finding indicators Note: SQL 2012 version coming soon.The Visual Guide for Building Team Foundation Server 2012 Environments: Version 1: --Nearforums - ASP.NET MVC forum engine: Nearforums v8.5: Version 8.5 of Nearforums, the ASP.NET MVC Forum Engine. New features include: Built-in search engine using Lucene.NET Flood control improvements Notifications improvements: sync option and mail body View Roadmap for more details webdeploy package sha1 checksum: 961aff884a9187b6e8a86d68913cdd31f8deaf83WiX Toolset: WiX Toolset v3.6: WiX Toolset v3.6 introduces the Burn bootstrapper/chaining engine and support for Visual Studio 2012 and .NET Framework 4.5. Other minor functionality includes: WixDependencyExtension supports dependency checking among MSI packages. WixFirewallExtension supports more features of Windows Firewall. WixTagExtension supports Software Id Tagging. WixUtilExtension now supports recursive directory deletion. Melt simplifies pure-WiX patching by extracting .msi package content and updating .w...Iveely Search Engine: Iveely Search Engine （0.2.0）: ????ISE?0.1.0??，?????，ISE?0.2.0?????????，???????，????????20???follow?ISE，????，??ISE??????????，??????????，?????????，?????????0.2.0??????，??????????。 Iveely Search Engine ?0.2.0?????????“??????????”，??????，?????????，???????，???????????????????，????、????????????。???0.1.0????????????： 1. ??“????” ??。??????????，?????????，???????????????????。??：????????，????????????，??????????????????。??????。 2. ??“????”??。?0.1.0??????，???????，???????????????，?????????????，????????，?0.2.0?，???????...GmailDefaultMaker: GmailDefaultMaker 3.0.0.2: Add QQ Mail BugfixSmart Data Access layer: Smart Data access Layer Ver 3: In this version support executing inline query is added. Check Documentation section for detail.DotNetNuke® Form and List: 06.00.04: DotNetNuke Form and List 06.00.04 Don't forget to backup your installation before upgrade. Changes in 06.00.04 Fix: Sql Scripts for 6.003 missed object qualifiers within stored procedures Fix: added missing resource "cmdCancel.Text" in form.ascx.resx Changes in 06.00.03 Fix: MakeThumbnail was broken if the application pool was configured to .Net 4 Change: Data is now stored in nvarchar(max) instead of ntext Changes in 06.00.02 The scripts are now compatible with SQL Azure, tested in a ne...Coevery - Free CRM: Coevery 1.0.0.24: Add a sample database, and installation instructions.New ProjectsA Simple Eng-Hindi CMS: A simple English- Hindi dual language content management system for small business/personal websites.Active Social Migrator: This project for managing the Active Social migration tool.ANSI Console User Control: Custom console control for .NET WinformsAutoSPInstallerGUI: GUI Configuration Tool for SPAutoInstaller Codeplex ProjectCode Documentation Checkin Policy: This checkin policy for Visual Studio 2012 checks if c# code is documented the way it's configured in the config of the policy. Code Dojo/Kata - Free Time Coding: Doing some katas of the Coding Dojo page. http://codingdojo.org/cgi-bin/wiki.pl?KataCataloguefjycUnifyShow: fjycUnifyShowHidden Capture (HC): HC is simple and easy utility to hidden and auto capture desktop or active windowHRC Integration Services: Fake SQL Server Integration Services. LOLKooboo CMS Sites Switcher: Kooboo CMS Sites SwitcherMod.CookieDetector: Orchard module for detecting whether cookies are enabledMyCodes: Created!MySQL Statement Monitor: MySQL Statement Monitor is a monitoring tool that monitors SQL statements transferred over the network.NeoModulusPIRandom: The idea with PI Random is to use easy string manipulation and simple math to generate a pseudo random number. Net Core Tech - Medical Record System: This is a Medical Record System ProjectOraPowerShell: PowerShell library for backup and maintenance of a Oracle Database environment under Microsoft Windows 2008PinDNN: PinDNN is a module that imparts Pinterest-like functionality to DotNetNuke sites. This module works with a MongoDB database and uses the built-in social relatioPyrogen Code Generator: PyroGen is a simple code generator accepting C# as the markup language.restMs: wil be deleted soonScript.NET: Script.NET is a script management utility for web forms and MVC, using ScriptJS-like features to link dependencies between scripts.SpringExample-Pagination: Simple Spring example with PaginationXNA and Component Based Design: This project includes code for XNA and Component Based Design

  Read the article

• MVVM Light V4 preview (BL0014) release notes

  - by Laurent Bugnion

  I just pushed to Codeplex an update to the MVVM Light source code. This is an early preview containing some of the features that I want to release later under the version 4. If you find these features useful for your project, please download the source code and build the assemblies. I will appreciate greatly any issue report. This version is labeled “V4.0.0.0/BL0014”. The “BL” string is an old habit that we used in my days at Siemens Building Technologies, called a “base level”. Somehow I like this way of incrementing the “base level” independently of any other consideration (such as alpha, beta, CTP, RTM etc) and continue to use it to tag my software versions. In Microsoft parlance, you could say that this is an early CTP of MVVM Light V4. Caveat The code is unit tested, but as we all know this does not mean that there are no bugs This code has not yet been used in production. Again, your help in testing this is greatly appreciated, so please report all bugs to me! What’s new? The following features have been implemented: Misc Various “maintenance work”. All WPF assemblies (that is .NET35 and .NET4) now allow partially trusted callers. It means that you can use them in am XBAP in partial trust mode. Testing Various test updates Added Windows Phone 7 unit tests Note: For Windows Phone 7, due to an issue in the unit test framework, not all tests can be executed. I had to isolate those tests for the moment. The error was reported to Microsoft. ViewModelBase The constructor is now public to allow serialization (especially useful on the phone to tombstone the state). ViewModelBase.MessengerInstance now returns Messenger.Default unless it is set explicitly. Previously, MessengerInstance was returning null, which was complicating the code. Two new ways to raise the PropertyChanged event have been added. See below for details. Messenger Updated the IMessenger interface with all public members from the Messenger class. Previously some members were missing. A new Unregister method is now available, allowing to unregister a recipient for a given token. RelayCommand RaiseCanExecuteChanged now acts the same in Windows Presentation Foundation than in Silverlight. In previous versions, I was relying on the CommandManager to raise the CanExecuteChanged event in WPF. However, it was found to be too unreliable, and a more direct way of raising the event was found preferable. See below for details. Raising the PropertyChanged event A very much requested update is now included: the ability to raise the PropertyChanged event in a viewmodel without using “magic strings”. Personally, I don’t see strings as a major issue, thanks to two features of the MVVM Light Toolkit: In the DEBUG configuration, every time that the RaisePropertyChanged method is called, the name of the property is checked against all existing properties of the viewmodel. Should the property name be misspelled (because of a typo or refactoring), an exception is thrown, notifying the developer that something is wrong. To avoid impacting the performance, this check is only made in DEBUG configuration, but that should be enough to warn the developers in case they miss a rename. The property name is defined as a public constant in the “mvvminpc” code snippet. This allows checking the property name from another class (for example if the PropertyChanged event is handled in the view). It also allows changing the property name in one place only. However, these two safeguards didn’t satisfy some of the users, who requested another way to raise the PropertyChanged event. In V4, you can now do the following: Using lambdas private int _myProperty; public int MyProperty { get { return _myProperty; } set { if (_myProperty == value) { return; } _myProperty = value; RaisePropertyChanged(() => MyProperty); } } This raises the property changed event using a lambda expression instead of the property name. Light reflection is used to get the name. This supports Intellisense and can easily be refactored. You can also broadcast a PropertyChangedMessage using the Messenger.Default instance with: private int _myProperty; public int MyProperty { get { return _myProperty; } set { if (_myProperty == value) { return; } var oldValue = _myProperty; _myProperty = value; RaisePropertyChanged(() => MyProperty, oldValue, value, true); } } Using no arguments When the RaisePropertyChanged method is called within a setter, you can also omit the property name altogether. This will fail if executed outside of the setter however. Also, to avoid confusion, there is no way to broadcast the PropertyChangedMessage using this syntax. private int _myProperty; public int MyProperty { get { return _myProperty; } set { if (_myProperty == value) { return; } _myProperty = value; RaisePropertyChanged(); } } The old way Of course the “old” way is still supported, without broadcast: public const string MyPropertyName = "MyProperty"; private int _myProperty; public int MyProperty { get { return _myProperty; } set { if (_myProperty == value) { return; } _myProperty = value; RaisePropertyChanged(MyPropertyName); } } And with broadcast: public const string MyPropertyName = "MyProperty"; private int _myProperty; public int MyProperty { get { return _myProperty; } set { if (_myProperty == value) { return; } var oldValue = _myProperty; _myProperty = value; RaisePropertyChanged(MyPropertyName, oldValue, value, true); } } Performance considerations It is notorious that using reflection takes more time than using a string constant to get the property name. However, after measuring for all platforms, I found the differences to be very small. I will measure more and submit the results to the community for evaluation, because some of the results are actually surprising (for example, using the Messenger to broadcast a PropertyChangedMessage does not significantly increase the time taken to raise the PropertyChanged event and update the bindings). For now, I submit this code to you, and would be delighted to hear about your own results. Raising the CanExecuteChanged event manually In WPF, until now, the CanExecuteChanged event for a RelayCommand was raised automatically. Or rather, it was attempted to be raised, using a feature that is only available in WPF called the CommandManager. This class monitors the UI and when something occurs, it queries the state of the CanExecute delegate for all the commands. However, this proved unreliable for the purpose of MVVM: Since very often the value of the CanExecute delegate changes according to non-UI events (for example something changing in the viewmodel or in the model), raising the CanExecuteChanged event manually is necessary. In Silverlight, the CommandManager does not exist, so we had to raise the event manually from the start. This proved more reliable, and I now changed the WPF implementation of the RaiseCanExecuteChanged method to be the exact same in WPF than in Silverlight. For instance, if a command must be enabled when a string property is set to a value other than null or empty string, you can do: public MainViewModel() { MyTestCommand = new RelayCommand( () => DoSomething(), () => !string.IsNullOrEmpty(MyProperty)); } public const string MyPropertyName = "MyProperty"; private string _myProperty = string.Empty; public string MyProperty { get { return _myProperty; } set { if (_myProperty == value) { return; } _myProperty = value; RaisePropertyChanged(MyPropertyName); MyTestCommand.RaiseCanExecuteChanged(); } } Logo update I made a minor change to the logo: Some people found the lack of the word “light” (as in MVVM Light Toolkit) confusing. I thought it was cool, because the feather suggests the idea of lightness, however I can see the point. So I added the word “light” to the logo. Things should be quite clear now. What’s next? This is only the first of a series of releases that will bring MVVM Light to V4. In the next weeks, I will continue to add some very requested features and correct some issues in the code. I will probably continue this fashion of releasing the changes to the public as source code through Codeplex. I would be very interested to hear what you think of that, and to get feedback about the changes. Cheers, Laurent   Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

  Read the article

• MySQL Utility Users' Console Oerview

  - by rudrap

  MySQL Utility Users' Console (mysqluc): The MySQL Utilities Users' Console is designed to make using the utilities easier via a dedicated console. It helps us to use the utilities without worrying about the python and utility paths. Why do we need a special console? - It does provide a unique shell environment with command completion, help for each utility, user defined variables, and type completion for options. - You no longer have to type out the entire name of the utility. - You don't need to remember the name of a database utility you want to use. - You can define variables and reuse them in your utility commands. - It is possible to run utility command along with mysqluc and come out of the mysqluc console. Console commands: mysqluc> help Command Description ----------------------           --------------------------------------------------- help utilities                     Display list of all utilities supported. help <utility>                  Display help for a specific utility. help or help commands   Show this list. exit or quit                       Exit the console. set <variable>=<value>  Store a variable for recall in commands. show options                   Display list of options specified by the user on launch. show variables                 Display list of variables. <ENTER>                       Press ENTER to execute command. <ESCAPE>                     Press ESCAPE to clear the command entry. <DOWN>                       Press DOWN to retrieve the previous command. <UP>                               Press UP to retrieve the next command in history. <TAB>                            Press TAB for type completion of utility, option,or variable names. <TAB><TAB>                Press TAB twice for list of matching type completion (context sensitive). How do I use it? Pre-requisites: - Download the latest version of MySQL Workbench. - Mysql Servers are running. - Your Pythonpath is set. (e.g. Export PYTHONPATH=/...../mysql-utilities/) Check the Version of mysqluc Utility: /usr/bin/python mysqluc.py –version It should display something like this MySQL Utilities mysqluc.py version 1.1.0 - MySQL Workbench Distribution 5.2.44 Copyright (c) 2010, 2012 Oracle and/or its affiliates. All rights reserved. This program is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, to the extent permitted by law. Use of TAB to get the current utilities: mysqluc> mysqldb<TAB><TAB> Utility Description -------------        ------------------------------------------------------------ mysqldbcopy      copy databases from one server to another mysqldbexport    export metadata and data from databases mysqldbimport    import metadata and data from files mysqluc> mysqldbcopy –source=$se<TAB> Variable Value -------- ---------------------------------------------------------------------- server1 root@localhost:3306 server2 root@localhost:3307 you can see the variables starting with se and then decide which to use Run a utility via the console: /usr/bin/python mysqluc.py -e "mysqldbcopy --source=root@localhost:3306 --destination=root@localhost:3307 dbname" Get help for utilities in the console: mysqluc> help utilities Display help for a utility mysqluc> help mysqldbcopy Details about mysqldbcopy and its options set variables and use them in commands: mysqluc> set server1 = root@localhost:3306 mysqluc>show variables Variable Value -------- ---------------------------------------------------------------------- server1    root@localhost:3306 server2    root@localhost:3307 mysqluc> mysqldbcopy –source=$server1 –destination=$server2 dbname <Enter> Mysqldbcopy utility output will display. mysqluc>show options Display list of options specified by the user mysqluc SERVER=root@host123 VAR_A=57 -e "show variables" Variable Value -------- ----------------------------------------------------------------- SERVER root@host123 VAR_A 57 Finding option names for an Utility: mysqluc> mysqlserverclone --n Option Description ------------------- --------------------------------------------------------- --new-data=NEW_DATA the full path to the location of the data directory for the new instance --new-port=NEW_PORT the new port for the new instance - default=3307 --new-id=NEW_ID the server_id for the new instance - default=2 Limitations: User defined variables have a lifetime of the console run time.

  Read the article

• Can I use the same machine as a client and server for SSH?

  - by achraf

  For development tests, I need to setup an SFTP server. So I want to know if it's possible to use the same machine as the client and the server. I tried and I keep getting this error: > Permission denied (publickey). > Connection closed and by running ssh -v agharroud@localhost i get : > OpenSSH_3.8.1p1,OpenSSL 0.9.7d 17 Mar > debug1: Reading configuration data /etc/ssh_config > debug1: Connecting to localhost [127.0.0.1] port 22. > debug1: Connection established. > debug1: identity file /home/agharroud/.ssh/identity type -1 > debug1: identity file /home/agharroud/.ssh/id_rsa type 1 > debug1: identity file /home/agharroud/.ssh/id_dsa type -1 > debug1: Remote protocol version 2.0, remote software version OpenSSH_3.8.1p1 > debug1: match: OpenSSH_3.8.1p1 pat OpenSSH* > debug1: Enabling compatibility mode for protocol 2.0 > debug1: Local version string SSH-2.0-OpenSSH_3.8.1p1 > debug1: SSH2_MSG_KEXINIT sent > debug1: SSH2_MSG_KEXINIT received > debug1: kex:server->client aes128-cbc hmac-md5 none > debug1: kex: client->server aes128-cbc hmac-md5 none > debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent > debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP > debug1: SSH2_MSG_KEX_DH_GEX_INIT sent > debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY > debug1: Host 'localhost' is known and matches the RSA host key. > debug1: Found key in /home/agharroud/.ssh/known_hosts:1 > debug1: ssh_rsa_verify: signature correct > debug1: SSH2_MSG_NEWKEYS sent > debug1: expecting SSH2_MSG_NEWKEYS > debug1: SSH2_MSG_NEWKEYS received > debug1: SSH2_MSG_SERVICE_REQUEST sent > debug1: SSH2_MSG_SERVICE_ACCEPT > received > > ****USAGE WARNING**** > > This is a private computer system. This computer system, including all > related equipment, networks, and network devices (specifically > including Internet access) are provided only for authorized use. This > computer system may be monitored for all lawful purposes, including to > ensure that its use is authorized, for management of the system, to > facilitate protection against unauthorized access, and to verify > security procedures, survivability, and operational security. Monitoring > includes active attacks by authorized entities to test or verify the > security of this system. During monitoring, information may be > examined, recorded, copied and used for authorized purposes. All > information, including personal information, placed or sent over this > system may be monitored. > > Use of this computer system, authorized or unauthorized, > constitutes consent to monitoring of this system. Unauthorized use may > subject you to criminal prosecution. Evidence of unauthorized use collected > during monitoring may be used for administrative, criminal, or other > adverse action. Use of this system constitutes consent to monitoring for > these purposes. > > debug1: Authentications that can continue: publickey > debug1: Next authentication method: publickey > debug1: Trying private key:/home/agharroud/.ssh/identity > debug1: Offering public key:/home/agharroud/.ssh/id_rsa > debug1:Authentications that can continue:publickey > debug1: Trying private key:/home/agharroud/.ssh/id_dsa > debug1: No more authentication methods to try. > Permission denied (publickey). Any ideas about the problem ? thanks !

  Read the article

• Why would Linux VM in vSphere ESXi 5.5 show dramatically increased disk i/o latency?

  - by mhucka

  I'm stumped and I hope someone else will recognize the symptoms of this problem. Hardware: new Dell T110 II, dual-core Pentium G860 2.9 GHz, onboard SATA controller, one new 500 GB 7200 RPM cabled hard drive inside the box, other drives inside but not mounted yet. No RAID. Software: fresh CentOS 6.5 virtual machine under VMware ESXi 5.5.0 (build 174 + vSphere Client). 2.5 GB RAM allocated. The disk is how CentOS offered to set it up, namely as a volume inside an LVM Volume Group, except that I skipped having a separate /home and simply have / and /boot. CentOS is patched up, ESXi patched up, latest VMware tools installed in the VM. No users on the system, no services running, no files on the disk but the OS installation. I'm interacting with the VM via the VM virtual console in vSphere Client. Before going further, I wanted to check that I configured things more or less reasonably. I ran the following command as root in a shell on the VM: for i in 1 2 3 4 5 6 7 8 9 10; do dd if=/dev/zero of=/test.img bs=8k count=256k conv=fdatasync done I.e., just repeat the dd command 10 times, which results in printing the transfer rate each time. The results are disturbing. It starts off well: 262144+0 records in 262144+0 records out 2147483648 bytes (2.1 GB) copied, 20.451 s, 105 MB/s 262144+0 records in 262144+0 records out 2147483648 bytes (2.1 GB) copied, 20.4202 s, 105 MB/s ... but after 7-8 of these, it then prints 262144+0 records in 262144+0 records out 2147483648 bytes (2.1 GG) copied, 82.9779 s, 25.9 MB/s 262144+0 records in 262144+0 records out 2147483648 bytes (2.1 GB) copied, 84.0396 s, 25.6 MB/s 262144+0 records in 262144+0 records out 2147483648 bytes (2.1 GB) copied, 103.42 s, 20.8 MB/s If I wait a significant amount of time, say 30-45 minutes, and run it again, it again goes back to 105 MB/s, and after several rounds (sometimes a few, sometimes 10+), it drops to ~20-25 MB/s again. Plotting the disk latency in vSphere's interface, it shows periods of high disk latency hitting 1.2-1.5 seconds during the times that dd reports the low throughput. (And yes, things get pretty unresponsive while that's happening.) What could be causing this? I'm comfortable that it is not due to the disk failing, because I also had configured two other disks as an additional volume in the same system. At first I thought I did something wrong with that volume, but after commenting the volume out from /etc/fstab and rebooting, and trying the tests on / as shown above, it became clear that the problem is elsewhere. It is probably an ESXi configuration problem, but I'm not very experienced with ESXi. It's probably something stupid, but after trying to figure this out for many hours over multiple days, I can't find the problem, so I hope someone can point me in the right direction. (P.S.: yes, I know this hardware combo won't win any speed awards as a server, and I have reasons for using this low-end hardware and running a single VM, but I think that's besides the point for this question [unless it's actually a hardware problem].) ADDENDUM #1: Reading other answers such as this one made me try adding oflag=direct to dd. However, it makes no difference in the pattern of results: initially the numbers are higher for many rounds, then they drop to 20-25 MB/s. (The initial absolute numbers are in the 50 MB/s range.) ADDENDUM #2: Adding sync ; echo 3 > /proc/sys/vm/drop_caches into the loop does not make a difference at all. ADDENDUM #3: To take out further variables, I now run dd such that the file it creates is larger than the amount of RAM on the system. The new command is dd if=/dev/zero of=/test.img bs=16k count=256k conv=fdatasync oflag=direct. Initial throughput numbers with this version of the command are ~50 MB/s. They drop to 20-25 MB/s when things go south. ADDENDUM #4: Here is the output of iostat -d -m -x 1 running in another terminal window while performance is "good" and then again when it's "bad". (While this is going on, I'm running dd if=/dev/zero of=/test.img bs=16k count=256k conv=fdatasync oflag=direct.) First, when things are "good", it shows this: When things go "bad", iostat -d -m -x 1 shows this:

  Read the article

• Most secure way to access my home Linux server while I am on the road? Specialized solution wanted

  - by Ace Paus

  I think many people may be in my situation. I travel on business with a laptop. And I need secure access to files from the office (which in my case is my home). The short version of my question: How can I make SSH/SFTP really secure when only one person needs to connect to the server from one laptop? In this situation, what special steps would make it almost impossible for anyone else to get online access to the server? A lot more details: I use Ubuntu Linux on both my laptop (KDE) and my home/office server. Connectivity is not a problem. I can tether to my phone's connection if needed. I need access to a large number of files (around 300 GB). I don't need all of them at once, but I don't know in advance which files I might need. These files contain confidential client info and personal info such as credit card numbers, so they must be secure. Given this, I don't want store all these files on Dropbox or Amazon AWS, or similar. I couldn't justify that cost anyway (Dropbox don't even publish prices for plans above 100 GB, and security is a concern). However, I am willing to spend some money on a proper solution. A VPN service, for example, might be part of the solution? Or other commercial services? I've heard about PogoPlug, but I don't know if there is a similar service that might address my security concerns? I could copy all my files to my laptop because it has the space. But then I have to sync between my home computer and my laptop and I found in the past that I'm not very good about doing this. And if my laptop is lost or stolen, my data would be on it. The laptop drive is an SSD and encryption solutions for SSD drives are not good. Therefore, it seems best to keep all my data on my Linux file server (which is safe at home). Is that a reasonable conclusion, or is anything connected to the Internet such a risk that I should just copy the data to the laptop (and maybe replace the SSD with an HDD, which reduces battery life and performance)? I view the risks of losing a laptop to be higher. I am not an obvious hacking target online. My home broadband is cable Internet, and it seems very reliable. So I want to know the best (reasonable) way to securely access my data (from my laptop) while on the road. I only need to access it from this one computer, although I may connect from either my phone's 3G/4G or via WiFi or some client's broadband, etc. So I won't know in advance which IP address I'll have. I am leaning toward a solution based on SSH and SFTP (or similar). SSH/SFTP would provided about all the functionality I anticipate needing. I would like to use SFTP and Dolphin to browse and download files. I'll use SSH and the terminal for anything else. My Linux file server is set up with OpenSSH. I think I have SSH relatively secured. I'm using Denyhosts too. But I want to go several steps further. I want to get the chances that anyone can get into my server as close to zero as possible while still allowing me to get access from the road. I'm not a sysadmin or programmer or real "superuser". I have to spend most of my time doing other things. I've heard about "port knocking" but I have never used it and I don't know how to implement it (although I'm willing to learn). I have already read a number of articles with titles such as: Top 20 OpenSSH Server Best Security Practices 20 Linux Server Hardening Security Tips Debian Linux Stop SSH User Hacking / Cracking Attacks with DenyHosts Software more... I have not implemented every single thing I've read about. I probably can't do that. But maybe there is something even better I can do in my situation because I only need access from a single laptop. I'm just one user. My server does not need to be accessible to the general public. Given all these facts, I'm hoping I can get some suggestions here that are within my capability to implement and that leverage these facts to create a great deal better security than general purpose suggestions in the articles above.

  Read the article

• a friendly elaboratation on how iceweasel misses as recent request was discovered in post tut

  - by v3x3n

  I would like to specify what you asked about in how iceweasel misses on in hopes that you are interested in considering the answer to be valid considering the package should run efficient to a novice user especially when getting a first impression on a new software, browser, or package they are given by default. First let me say that I am very grateful for all debian has and continues to do for its user base and I am not complaining, only hoping that in mentioning such it will eventually aid in improving the disappointing experience iceweasel gave me in multiple ways right from the start of using it. I am sure tremendous amounts of hard work went into making it work as well as it does, and tremendous effort continues to go into IW like the rest of the package and distros such as this... Having said that, I do aim to keep my examples simple as possible but also explained in enough detail as to not leave out important info to get a full idea of my issue... (Thanks for understanding if I sound novice to debian, I am but continue to learn and advance by trial and error each day, and of course the wonderful help from all the great minds available here and there)... Well, my bone to pick (unfortunately as I disdain being a complainer when so much has been done for us, the end user) with IW is mainly 3 immediately noticed problems in offering me a smooth test drive (completely normal browsing conduct of your average user, I should indicate) as soon as I started out a task using IW (heading directly to google images and searched for a few web sized images, then saved a few (no more than 800 to 900 in dimensions, typically a normal procedure I would imagine) I experienced a horrendous reoccurring freeze and lag time that almost left me to kill the process more than once on each attempt and continued to compound so that by a few attempts later, even 1 single image save locked up the entire browser, ultimately giving up on my procedure in its simplicity with a bit of aggravation, if there was something I had done wrong on my end pre-attempt or during installation. Secondly, visiting video player sites in this case youtube will not allow for any video feed to play whatsoever and again, experienced a slight freezing that eventually dissipated as long as I didn't attempt to press play or reload another video trial... Very annoying and possibly related to my first issue (which could rely on my own lack of knowledge in setup config, but that troubles me if so).... Lastly as another user has stated already, in which brought you to ask them what exactly seemed to be the problem in the first place is also my final straw that broke the weasel's back, leading me here to find a solution to a updated version of firefox... being that iceweasel (an apparent build of firefox 17.x.x) leaving the user to find themselves out of luck when installing their favorite or much useful add-ons or plugins that aid their task or normal usage online.... As the other user clearly stated... there is almost zero options and barely any luck to find compatible plugins with such an outdated version still being used... I can only imagine if as a novoice or standard user to linux... and beginner to debian (which I am all for btw!) if I am discovering major conductivity issues which hinder normal user conduct right off the bat... that there is probably a bundle or more of security vulnerabilities that would unravel to me if I continued to give mr Hommey's package any further attention, or interest in continuing to use... This is a deal breaker on any account, unless all 3 of these issues stated are due to a very n00berish setting or lack thereof (which if that is the case, such was not properly stated for beginner in any place available by following installation tutorials such as LVM installers, which I felt lacked a clear understanding to someone who is trying to learn why and how, rather than, a fix to a potentially broken out of box installation... I really think that is irrelevant in any case however, as there is much step by step support regarding that kind of thing, just saying... its very challenging, along side a job to keep deadlines on, and the need to learn a better and more costomizible system, that was not as popularized when I became a dev via windows (OK OK I know thats a huge mistake and now I am way off original topic but anyway) Thanks very much for taking the time to read over this, and I hope it honestly gives you a few good and valid reasons for users wanting and seeking a way to get around iceweasel altogether... Finally, if I am missing something vital that renders all I've stated invalid or useless, please feel free to shove that elephant in the room my direction! Thanks for all you do, as I am sure it is very useful and dedicated, being you are a debian maintainer, and super user! Much love for intelligence, freedom and sharing the secrets of the web! May it remain unregulated and a good place to grow and learn for generations to come! Stay true! Take care now! -v3x (v3x @ gmx .com)

  Read the article

• CodePlex Daily Summary for Tuesday, August 19, 2014

  CodePlex Daily Summary for Tuesday, August 19, 2014Popular ReleasesVG-Ripper & PG-Ripper: VG-Ripper 2.9.62: changes NEW: Added Support for 'MadImage.org' links NEW: Added Support for 'ImgSpot.org' links NEW: Added Support for 'ImgClick.net' links NEW: Added Support for 'Imaaage.com' links NEW: Added Support for 'Image-Bugs.com' links NEW: Added Support for 'Pictomania.org' links NEW: Added Support for 'ImgDap.com' links NEW: Added Support for 'FileSpit.com' links FIXED: 'ImgSee.me' linksLinq 4 Javascript: Version 2.4: Minor Changes Made Added Count() and Count(with where clause) Distinct will now use a dictionary instead of a custom dictionary object Organize the unit tests. The variable names will actually make sense and won't be 2 letters. SelectMany will now use the queryable logic.Magick.NET: Magick.NET 7.0.0.0001: Magick.NET linked with ImageMagick 7-Beta.CMake Tools for Visual Studio: CMake Tools for Visual Studio 1.2: This release adds the following new features and bug fixes from CMake Tools for Visual Studio 1.1: Added support for CMake 3.0. Added support for word completion. Added IntelliSense support for the CMAKEHOSTSYSTEM_INFORMATION command. Fixed syntax highlighting for tokens beginning with escape sequences. Fixed issue uninstalling CMake Tools for Visual Studio after Visual Studio has been uninstalled.GW2 Personal Assistant Overlay: GW2 Personal Assistant Overlay 1.1: Overview1.1 is the second 'stable' release of the GW2 Personal Assistant Overlay. This version includes just a couple of very minor features and some minor bug fixes. For details regarding installation, setup, and general use, see Documentation. Note: If you were using a previous version, you will probably want to copy over the following user settings files: GW2PAO.DungeonSettings.xml GW2PAO.EventSettings.xml GW2PAO.WvWSettings.xml GW2PAO.ZoneCompletionSettings.xml New FeaturesAdded new "No...OpenCppCoverage: OpenCppCoverage 0.9.1: - Add Jenkins support. - Command line argument can be placed inside a config file. If you do not have Visual Studio C++ 2013 you need to download redistributable packages: http://www.microsoft.com/en-us/download/details.aspx?id=40784Easy Backup Windows Service: Release 2.0 with CU: Fix log error when "To" directory not exist in fyle system. Force run program as administrator by default. Add 'everyday' schedule element. Update solution to VS 2013.Easy Backup Application: Release 2.0 with CU: Fix log error when "To" directory not exist in fyle system. Fix app location initialization. Force run program as administrator by default. Update solution to VS 2013.TEBookConverter: 1.5: Added: Turkish and French translations Added: A few interface changes Removed: SkinDynamulet: Dynamulet v0.1: DynamoDB Transaction Server v0.1Console parallel nunit tests runner: ConsoleUnitTestsRunner 1.03: bugfixingFluentx: Fluentx v1.5.3: Added few more extension methods.fastJSON: v2.1.2: 2.1.2 - bug fix circular referencesJPush.NET: JPush Server SDK 1.2.1 (For JPush V3): Assembly: 1.2.1.24728 JPush REST API Version: v3 JPush Documentation Reference .NET framework: v4.0 or above. Sample: class: JPushClientV3 2014 Augest 15th.SEToolbox: SEToolbox 01.043.008 Release 1: Changed ship/station names to use new DisplayName instead of Beacon/Antenna. Fixed issue with updated SE binaries 01.043.018 using new Voxel Material definitions.Google .Net API: Drive.Sample: Google .NET Client API – Drive.SampleInstructions for the Google .NET Client API – Drive.Sample</h2> http://code.google.com/p/google-api-dotnet-client/source/browse/?repo=samples#hg%2FDrive.SampleBrowse Source, or main file http://code.google.com/p/google-api-dotnet-client/source/browse/Drive.Sample/Program.cs?repo=samplesProgram.cs <h3>1. Checkout Instructions</h3> <p><b>Prerequisites:</b> Install Visual Studio, and <a href="http://mercurial.selenic.com/">Mercurial</a>.</p> ...FineUI - jQuery / ExtJS based ASP.NET Controls: FineUI v4.1.1: -??Form??????????????（???-5929）。 -?TemplateField??ExpandOnDoubleClick、ExpandOnEnter、ExpandToSelectRow????（LZOM-5932）。 -BodyPadding???????，??“5”“5 10”，???????????“5px”“5px 10px”。 -??TriggerBox?EnableEdit=false????，??????????????（Jango_Jing-5450）。 -???????????DataKeyNames???????????（yygy-6002）。 -????????????????????????（Gnid-6018）。 -??PageManager???AutoSizePanelID????，??????????????????（yygy-6008）。 -?FState???????????????，????????????????（????-5925）。 -??????OnClientClick???return?????????（FineU...DNN CMS Platform: 07.03.02: Major Highlights Fixed backwards compatibility issue with 3rd party control panels Fixed issue in the drag and drop functionality of the File Uploader in IE 11 and Safari Fixed issue where users were able to create pages with the same name Fixed issue that affected older versions of DNN that do not include the maxAllowedContentLength during upgrade Fixed issue that stopped some skins from being upgraded to newer versions Fixed issue that randomly showed an unexpected error during us...WordMat: WordMat for Mac: WordMat for Mac has a few limitations compared to the Windows version - Graph is not supported (Gnuplot, GeoGebra and Excel works) - Units are not supported yet (Coming up) The Mac version is yet as tested as the windows version.MFCMAPI: August 2014 Release: Build: 15.0.0.1042 Full release notes at SGriffin's blog. If you just want to run the MFCMAPI or MrMAPI, get the executables. If you want to debug them, get the symbol files and the source. The 64 bit builds will only work on a machine with Outlook 2010/2013 64 bit installed. All other machines should use the 32 bit builds, regardless of the operating system. Facebook BadgeNew Projectsangle.works: Angle.works sample solutionAutomatically Update CMS from SCOM: Microsoft Central Management Server (CMS) was released with SQL Server 2008; however keeping the server list up-to-date is challenging.BLE for NETMF: Class library targeted to .NET Micro Framework for BLE support (both central and peripheral profiles).CIIS: ciisClipboard Calculator: Simple tool to calculate numbers from the clipboard. Useful for SQL Server Management Studio User.CYCLOPS: CYCLOPS is a project that seeks to aid the development and testing of ANPR software. CYCLOPS provides a virtual camera and virtual frame grabber for image procedemo4: demo4eAsset: Web based Fixed Asset Management SystemEFML-Runtime: Create applications with xml,css,js feeadmin: Complete fee managementFinal Fantasy VI Randomizer: This is a simple program that randomizes skills, items, and characters in Final Fantasy VI. It is used for racing the game.Object Editor: Object Editor is a visual editor which allows to edit any properties of any class and to simplify the changing and displaying of a class instance.pbb: Pinoy Badminton Buddies Web ApplicationRubyFeed: RubyFeed is a stand-alone HTML5 page for Internet Explorer on Windows 8 and above that makes it easy to view and manage your Windows RSS Platform feeds.

  Read the article

• Accessing a broken mdadm raid

  - by CarstenCarsten

  Hi! I used a western digital mybookworld (SOHO NAS storage using Linux) as backup for my Linux box. Suddenly, the mybookworld does not boot up any more. So I opened the box, removed the hard disk and put the hard disk into an external USB HDD case, and connected it to my Linux box. [ 530.640301] usb 2-1: new high speed USB device using ehci_hcd and address 3 [ 530.797630] scsi7 : usb-storage 2-1:1.0 [ 531.794844] scsi 7:0:0:0: Direct-Access WDC WD75 00AAKS-00RBA0 PQ: 0 ANSI: 2 [ 531.796490] sd 7:0:0:0: Attached scsi generic sg3 type 0 [ 531.797966] sd 7:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 531.800317] sd 7:0:0:0: [sdc] Write Protect is off [ 531.800327] sd 7:0:0:0: [sdc] Mode Sense: 38 00 00 00 [ 531.800333] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 531.803821] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 531.803836] sdc: sdc1 sdc2 sdc3 sdc4 [ 531.815831] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 531.815842] sd 7:0:0:0: [sdc] Attached SCSI disk The dmesg output looks normal, but I was wondering why the hardisk was not mounted at all. And why there are 4 different partitions on it. fdisk showed the following: root@ubuntu:/home/ubuntu# fdisk /dev/sdc WARNING: DOS-compatible mode is deprecated. It's strongly recommended to switch off the mode (command 'c') and change display units to sectors (command 'u'). Command (m for help): p Disk /dev/sdc: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00007c00 Device Boot Start End Blocks Id System /dev/sdc1 4 369 2939895 fd Linux raid autodetect /dev/sdc2 370 382 104422+ fd Linux raid autodetect /dev/sdc3 383 505 987997+ fd Linux raid autodetect /dev/sdc4 506 91201 728515620 fd Linux raid autodetect Oh no! Everything seems to be created as a mdadm software raid. Calling mdadm --examine with the different partitions seems to affirm that. I think the only partition I am interested in, is /dev/sdc4 (because it is the largest). But nevertheless I called mdadm --examine with every partition. root@ubuntu:/home/ubuntu# mdadm --examine /dev/sdc1 /dev/sdc1: Magic : a92b4efc Version : 00.90.00 UUID : 5626a2d8:070ad992:ef1c8d24:cd8e13e4 Creation Time : Wed Feb 20 00:57:49 2002 Raid Level : raid1 Used Dev Size : 2939776 (2.80 GiB 3.01 GB) Array Size : 2939776 (2.80 GiB 3.01 GB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 1 Update Time : Sun Nov 21 11:05:27 2010 State : clean Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Checksum : 4c90bc55 - correct Events : 16682 Number Major Minor RaidDevice State this 0 8 1 0 active sync /dev/sda1 0 0 8 1 0 active sync /dev/sda1 1 1 0 0 1 faulty removed root@ubuntu:/home/ubuntu# mdadm --examine /dev/sdc2 /dev/sdc2: Magic : a92b4efc Version : 00.90.00 UUID : 9734b3ee:2d5af206:05fe3413:585f7f26 Creation Time : Wed Feb 20 00:57:54 2002 Raid Level : raid1 Used Dev Size : 104320 (101.89 MiB 106.82 MB) Array Size : 104320 (101.89 MiB 106.82 MB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 2 Update Time : Wed Oct 27 20:19:08 2010 State : clean Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Checksum : 55560b40 - correct Events : 9884 Number Major Minor RaidDevice State this 0 8 2 0 active sync /dev/sda2 0 0 8 2 0 active sync /dev/sda2 1 1 0 0 1 faulty removed root@ubuntu:/home/ubuntu# mdadm --examine /dev/sdc3 /dev/sdc3: Magic : a92b4efc Version : 00.90.00 UUID : 08f30b4f:91cca15d:2332bfef:48e67824 Creation Time : Wed Feb 20 00:57:54 2002 Raid Level : raid1 Used Dev Size : 987904 (964.91 MiB 1011.61 MB) Array Size : 987904 (964.91 MiB 1011.61 MB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 3 Update Time : Sun Nov 21 11:05:27 2010 State : clean Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Checksum : 39717874 - correct Events : 73678 Number Major Minor RaidDevice State this 0 8 3 0 active sync 0 0 8 3 0 active sync 1 1 0 0 1 faulty removed root@ubuntu:/home/ubuntu# mdadm --examine /dev/sdc4 /dev/sdc4: Magic : a92b4efc Version : 00.90.00 UUID : febb75ca:e9d1ce18:f14cc006:f759419a Creation Time : Wed Feb 20 00:57:55 2002 Raid Level : raid1 Used Dev Size : 728515520 (694.77 GiB 746.00 GB) Array Size : 728515520 (694.77 GiB 746.00 GB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 4 Update Time : Sun Nov 21 11:05:27 2010 State : clean Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Checksum : 2f36a392 - correct Events : 519320 Number Major Minor RaidDevice State this 0 8 4 0 active sync 0 0 8 4 0 active sync 1 1 0 0 1 faulty removed If I read the output correctly everything was removed, because it was faulty. Is there ANY way to see the contents of the largest partition? Or seeing somehow which files are broken? I see that everything is raid1 which is only mirroring, so this should be a normal partition. I am anxious to do anything with mdadm, in fear that I destroy the data on the hard disk. I would be very thankful for any help.

  Read the article

• Combined SOAP/JSON/XML in WCF, using UriTemplate

  - by gregmac

  I'm trying to build a generic web service interface using WCF, to allow 3rd party developers to hook into our software. After much struggling and reading (this question helped a lot), I finally got SOAP, JSON and XML (POX) working together. To simplify, here's my code (to make this example simple, I'm not using interfaces -- I did try this both ways): <ServiceContract()> _ Public Class TestService Public Sub New() End Sub <OperationContract()> _ <WebGet()> _ Public Function GetDate() As DateTime Return Now End Function '<WebGet(UriTemplate:="getdateoffset/{numDays}")> _ <OperationContract()> _ Public Function GetDateOffset(ByVal numDays As Integer) As DateTime Return Now.AddDays(numDays) End Function End Class and the web.config code: <services> <service name="TestService" behaviorConfiguration="TestServiceBehavior"> <endpoint address="soap" binding="basicHttpBinding" contract="TestService"/> <endpoint address="json" binding="webHttpBinding" behaviorConfiguration="jsonBehavior" contract="TestService"/> <endpoint address="xml" binding="webHttpBinding" behaviorConfiguration="poxBehavior" contract="TestService"/> <endpoint address="mex" contract="IMetadataExchange" binding="mexHttpBinding" /> </service> </services> <behaviors> <endpointBehaviors> <behavior name="jsonBehavior"> <enableWebScript/> </behavior> <behavior name="poxBehavior"> <webHttp /> </behavior> </endpointBehaviors> <serviceBehaviors> <behavior name="TestServiceBehavior"> <serviceMetadata httpGetEnabled="true"/> <serviceDebug includeExceptionDetailInFaults="false"/> </behavior> </serviceBehaviors> </behaviors> This actually works -- I'm able to go to TestService.svc/xml/GetDate for xml, TestService.svc/json/GetDate for json, and point a SOAP client at TestService.svc?wsdl and have the SOAP queries work. The part I'd like to fix is the queries. I have to use TestService.svc/xml/GetDateOffset?numDays=4 instead of TestService.svc/xml/GetDateOffset/4. If I specify the UriTemplate, I get the error: Endpoints using 'UriTemplate' cannot be used with 'System.ServiceModel.Description.WebScriptEnablingBehavior'. But of course without using <enableWebScript/>, JSON doesn't work. The only other thing I've seen that I think will work is making 3 different services (.svc files), that all implement an interface that specifies the contract, but in the classes specify different WebGet/WebInvoke attributes on each class. This seems like a lot of extra work, that frankly, I don't see why the framework doesn't handle for me. The implementation of the classes would all be the same, except for the attributes, which means over time it would be easy for bugs/changes to get fixed/done in one implementation but not the others, leading to inconsistent behaviour when using the JSON vs SOAP implementation for example. Am I doing something wrong here? Am I taking a totally wrong approach and misusing WCF? Is there a better way to do this? With my experience doing web stuff, I think it should be possible for some kind of framework to handle this ... I even have an idea in my head of how to build it. It just seems like WCF is supposed to be doing this, and I don't really want to reinvent the wheel.

  Read the article

• Is there a C pre-processor which eliminates #ifdef blocks based on values defined/undefined?

  - by Jonathan Leffler

  Original Question What I'd like is not a standard C pre-processor, but a variation on it which would accept from somewhere - probably the command line via -DNAME1 and -UNAME2 options - a specification of which macros are defined, and would then eliminate dead code. It may be easier to understand what I'm after with some examples: #ifdef NAME1 #define ALBUQUERQUE "ambidextrous" #else #define PHANTASMAGORIA "ghostly" #endif If the command were run with '-DNAME1', the output would be: #define ALBUQUERQUE "ambidextrous" If the command were run with '-UNAME1', the output would be: #define PHANTASMAGORIA "ghostly" If the command were run with neither option, the output would be the same as the input. This is a simple case - I'd be hoping that the code could handle more complex cases too. To illustrate with a real-world but still simple example: #ifdef USE_VOID #ifdef PLATFORM1 #define VOID void #else #undef VOID typedef void VOID; #endif /* PLATFORM1 */ typedef void * VOIDPTR; #else typedef mint VOID; typedef char * VOIDPTR; #endif /* USE_VOID */ I'd like to run the command with -DUSE_VOID -UPLATFORM1 and get the output: #undef VOID typedef void VOID; typedef void * VOIDPTR; Another example: #ifndef DOUBLEPAD #if (defined NT) || (defined OLDUNIX) #define DOUBLEPAD 8 #else #define DOUBLEPAD 0 #endif /* NT */ #endif /* !DOUBLEPAD */ Ideally, I'd like to run with -UOLDUNIX and get the output: #ifndef DOUBLEPAD #if (defined NT) #define DOUBLEPAD 8 #else #define DOUBLEPAD 0 #endif /* NT */ #endif /* !DOUBLEPAD */ This may be pushing my luck! Motivation: large, ancient code base with lots of conditional code. Many of the conditions no longer apply - the OLDUNIX platform, for example, is no longer made and no longer supported, so there is no need to have references to it in the code. Other conditions are always true. For example, features are added with conditional compilation so that a single version of the code can be used for both older versions of the software where the feature is not available and newer versions where it is available (more or less). Eventually, the old versions without the feature are no longer supported - everything uses the feature - so the condition on whether the feature is present or not should be removed, and the 'when feature is absent' code should be removed too. I'd like to have a tool to do the job automatically because it will be faster and more reliable than doing it manually (which is rather critical when the code base includes 21,500 source files). (A really clever version of the tool might read #include'd files to determine whether the control macros - those specified by -D or -U on the command line - are defined in those files. I'm not sure whether that's truly helpful except as a backup diagnostic. Whatever else it does, though, the pseudo-pre-processor must not expand macros or include files verbatim. The output must be source similar to, but usually simpler than, the input code.) Status Report (one year later) After a year of use, I am very happy with 'sunifdef' recommended by the selected answer. It hasn't made a mistake yet, and I don't expect it to. The only quibble I have with it is stylistic. Given an input such as: #if (defined(A) && defined(B)) || defined(C) || (defined(D) && defined(E)) and run with '-UC' (C is never defined), the output is: #if defined(A) && defined(B) || defined(D) && defined(E) This is technically correct because '&&' binds tighter than '||', but it is an open invitation to confusion. I would much prefer it to include parentheses around the sets of '&&' conditions, as in the original: #if (defined(A) && defined(B)) || (defined(D) && defined(E)) However, given the obscurity of some of the code I have to work with, for that to be the biggest nit-pick is a strong compliment; it is valuable tool to me. The New Kid on the Block Having checked the URL for inclusion in the information above, I see that (as predicted) there is an new program called Coan that is the successor to 'sunifdef'. It is available on SourceForge and has been since January 2010. I'll be checking it out...further reports later this year, or maybe next year, or sometime, or never.

  Read the article

• Accessing Oracle DB through SQL Server using OPENROWSET

  - by Ken Paul

  I'm trying to access a large Oracle database through SQL Server using OPENROWSET in client-side Javascript, and not having much luck. Here are the particulars: A SQL Server view that accesses the Oracle database using OPENROWSET works perfectly, so I know I have valid connection string parameters. However, the new requirement is for extremely dynamic Oracle queries that depend on client-side selections, and I haven't been able to get dynamic (or even parameterized) Oracle queries to work from SQL Server views or stored procedures. Client-side access to the SQL Server database works perfectly with dynamic and parameterized queries. I cannot count on clients having any Oracle client software. Therefore, access to the Oracle database has to be through the SQL Server database, using views, stored procedures, or dynamic queries using OPENROWSET. Because the SQL Server database is on a shared server, I'm not allowed to use globally-linked databases. My idea was to define a function that would take my own version of a parameterized Oracle query, make the parameter substitutions, wrap the query in an OPENROWSET, and execute it in SQL Server, returning the resulting recordset. Here's sample code: // db is a global variable containing an ADODB.Connection opened to the SQL Server DB // rs is a global variable containing an ADODB.Recordset . . . ss = "SELECT myfield FROM mytable WHERE {param0} ORDER BY myfield;"; OracleQuery(ss,["somefield='" + somevalue + "'"]); . . . function OracleQuery(sql,params) { var s = sql; var i; for (i = 0; i < params.length; i++) s = s.replace("{param" + i + "}",params[i]); var e = "SELECT * FROM OPENROWSET('MSDAORA','(connect-string-values)';" + "'user';'pass','" + s.split("'").join("''") + "') q"; try { rs.Open("EXEC ('" + e.split("'").join("''") + "')",db); } catch (eobj) { alert("SQL ERROR: " + eobj.description + "\nSQL: " + e); } } The SQL error that I'm getting is Ad hoc access to OLE DB provider 'MSDAORA' has been denied. You must access this provider through a linked server. which makes no sense to me. The Microsoft explanation for this error relates to a registry setting (DisallowAdhocAccess). This is set correctly on my PC, but surely this relates to the DB server and not the client PC, and I would expect that the setting there is correct since the view mentioned above works. One alternative that I've tried is to eliminate the enclosing EXEC in the Open statement: rs.Open(e,db); but this generates the same error. I also tried putting the OPENROWSET in a stored procedure. This works perfectly when executed from within SQL Server Management Studio, but fails with the same error message when the stored procedure is called from Javascript. Is what I'm trying to do possible? If so, can you recommend how to fix my code? Or is a completely different approach necessary? Any hints or related information will be welcome. Thanks in advance.

  Read the article

• "Launch Failed. Binary Not Found." Snow Leopard and Eclipse C/C++ IDE issue.

  - by Alex

  Not a question, I've just scoured the internet in search of a solution for this problem and thought I'd share it with the good folks of SO. I'll put it in plain terms so that it's accessible to newbs. :) (Apologies if this is the wrong place -- just trying to be helpful.) This issue occurs with almost any user OS X Snow Leopard who tries to use the Eclipse C/C++ IDE, but is particularly annoying for the people (like me) who were using the Eclipse C/C++ IDE in Leopard, and were unable to work with Eclipse anymore when they upgraded. The issue occurs When users go to build/compile/link their software. They get the following error: Launch Failed. Binary Not Found. Further, the "binaries" branch in the project window on the left is simply nonexistent. THE PROBLEM: is that GCC 4.2 (the GNU Compiler Collection) that comes with Snow Leopard compiles binaries in 64-bit by default. Unfortunately, the linker that Eclipse uses does not understand 64-bit binaries; it reads 32-bit binaries. There may be other issues here, but in short, they culminate in no binary being generated, at least not one that Eclipse can read, which translates into Eclipse not finding the binaries. Hence the error. One solution is to add an -arch i686 flag when making the file, but manually making the file every time is annoying. Luckily for us, Snow Leopard also comes with GCC 4.0, which compiles in 32 bits by default. So one solution is merely to link this as the default compiler. This is the way I did it. THE SOLUTION: The GCCs are in /usr/bin, which is normally a hidden folder, so you can't see it in the Finder unless you explicitly tell the system that you want to see hidden folders. Anyway, what you want to do is go to the /usr/bin folder and delete the path that links the GCC command with GCC 4.2 and add a path that links the GCC command with GCC 4.0. In other words, when you or Eclipse try to access GCC, we want the command to go to the compiler that builds in 32 bits by default, so that the linker can read the files; we do not want it to go to the compiler that compiles in 64 bits. The best way to do this is to go to Applications/Utilities, and select the app called Terminal. A text prompt should come up. It should say something like "(Computer Name):~ (Username)$ " (with a space for you user input at the end). The way to accomplish the tasks above is to enter the following commands, entering each one in sequence VERBATIM, and pressing enter after each individual line. cd /usr/bin rm cc gcc c++ g++ ln -s gcc-4.0 cc ln -s gcc-4.0 gcc ln -s c++-4.0 c++ ln -s g++-4.0 g++ Like me, you will probably get an error that tells you you don't have permission to access these files. If so, try the following commands instead: cd /usr/bin sudo rm cc gcc c++ g++ sudo ln -s gcc-4.0 cc sudo ln -s gcc-4.0 gcc sudo ln -s c++-4.0 c++ sudo ln -s g++-4.0 g++ Sudo may prompt you for a password. If you've never used sudo before, try just pressing enter. If that doesn't work, try the password for your main admin account. OTHER POSSIBLE SOLUTIONS You may be able to enter build variables into Eclipse. I tried this, but I don't know enough about it. If you want to feel it out, the flag you will probably need is -arch i686. In earnest, GCC-4.0 worked for me all this time, and I don't see any reason to switch now. There may be a way to alter the default for the compiler itself, but once again, I don't know enough about it. Hope this has been helpful and informative. Good coding!

  Read the article

• Getting RINGING response on SIP UAC without sending it from the other UAC

  - by TacB0sS

  Hi, I hope this would be my last question about this SIP subject, I have managed to overcome the last issue I had by asking a friend to help me from a remote computer, I'm able to connect between the computers, but here is the thing, according to all the examples I saw, the Callee should invoke the Ringing response, but in my application case I didn't implement it yet, but I still receive on the Caller UAC a Ringing response, this is the SIP messages that are on the caller end: Outgoing Request 5: INVITE sip:[email protected] SIP/2.0 Contact: "Client 310" <sip:[email protected]> From: "Client 310" <sip:[email protected]> Max-Forwards: 32 CSeq: 2 INVITE Call-ID: [email protected] Allow: INVITE,CANCEL,ACK,BYE,OPTIONS Content-Type: application/sdp Proxy-Authorization: Digest username="310",nonce="012afffb",realm="asterisk",uri="sip:[email protected]",algorithm=MD5,response="d19ca5b98450b4be7bd4045edb8a3a2f" Via: SIP/2.0/UDP hostName.hn:5060 To: "Client 320" <sip:[email protected]>;tag=as5a8fa200 Content-Length: 257 v=0 o=310 7108915969559970847 7108915969559970847 IN IP4 xxx.xxx.x.xxx s=- i=Nu-Art Software - TacB0sS VoIP information c=IN IP4 xxx.xxx.x.xxx m=audio 3312 RTP/AVP 0 8 101 a=rtpmap:0 PCMU/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:101 telephone-event/8000 Incoming Response 6: SIP/2.0 100 Trying Via: SIP/2.0/UDP hostName.hn:5060;branch=f8d171d3278788df9e03eb9cf3acba70-xxx.xxx.x.xxx-2-invite-hostName.hn-5060333732;received=79.181.6.233 From: "Client 310" <sip:[email protected]> To: "Client 320" <sip:[email protected]>;tag=as5a8fa200 Call-ID: [email protected] CSeq: 2 INVITE User-Agent: Freeswitch 1.2.3 Allow: INVITE,ACK,CANCEL,OPTIONS,BYE,REFER,SUBSCRIBE,NOTIFY,INFO Supported: replaces Contact: <sip:[email protected]> Content-Length: 0 Incoming Response 7: SIP/2.0 180 Ringing Via: SIP/2.0/UDP hostName.hn:5060;branch=f8d171d3278788df9e03eb9cf3acba70-xxx.xxx.x.xxx-2-invite-hostName.hn-5060333732;received=79.181.6.233 From: "Client 310" <sip:[email protected]> To: "Client 320" <sip:[email protected]>;tag=as5a8fa200 Call-ID: [email protected] CSeq: 2 INVITE User-Agent: Freeswitch 1.2.3 Allow: INVITE,ACK,CANCEL,OPTIONS,BYE,REFER,SUBSCRIBE,NOTIFY,INFO Supported: replaces Contact: <sip:[email protected]> Content-Length: 0 Call to: [email protected] is Ringing Incoming Response 8: SIP/2.0 183 Session Progress Via: SIP/2.0/UDP hostName.hn:5060;branch=f8d171d3278788df9e03eb9cf3acba70-xxx.xxx.x.xxx-2-invite-hostName.hn-5060333732;received=79.181.6.233 From: "Client 310" <sip:[email protected]> To: "Client 320" <sip:[email protected]>;tag=as5a8fa200 Call-ID: [email protected] CSeq: 2 INVITE User-Agent: Freeswitch 1.2.3 Allow: INVITE,ACK,CANCEL,OPTIONS,BYE,REFER,SUBSCRIBE,NOTIFY,INFO Supported: replaces Contact: <sip:[email protected]> Content-Type: application/sdp Content-Length: 264 v=0 o=root 27669 27669 IN IP4 yy.yy.yy.yy s=session c=IN IP4 yy.yy.yy.yy t=0 0 m=audio 10914 RTP/AVP 0 8 101 a=rtpmap:0 PCMU/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-16 a=silenceSupp:off - - - - a=ptime:20 a=sendrecv Incoming Response 9: SIP/2.0 503 Service Unavailable Via: SIP/2.0/UDP hostName.hn:5060;branch=f8d171d3278788df9e03eb9cf3acba70-xxx.xxx.x.xxx-2-invite-hostName.hn-5060333732;received=79.181.6.233 From: "Client 310" <sip:[email protected]> To: "Client 320" <sip:[email protected]>;tag=as5a8fa200 Call-ID: [email protected] CSeq: 2 INVITE User-Agent: Freeswitch 1.2.3 Allow: INVITE,ACK,CANCEL,OPTIONS,BYE,REFER,SUBSCRIBE,NOTIFY,INFO Supported: replaces Content-Length: 0 I do not respond to the invite, that is why all this is happening, but why am I getting a ringing if I'm not the one sending it. Thanks, Adam.

  Read the article

• RegLoadAppKey working fine on 32-bit OS, failing on 64-bit OS, even if both processes are 32-bit

  - by James Manning

  I'm using .NET 4 and the new RegistryKey.FromHandle call so I can take the hKey I get from opening a registry file with RegLoadAppKey and operate on it with the existing managed API. I thought at first it was just a matter of a busted DllImport and my call had an invalid type in the params or a missing MarshalAs or whatever, but looking at other registry functions and their DllImport declarations (for instance, on pinvoke.net), I don't see what else to try (I've had hKey returned as both int and IntPtr, both worked on 32-bit OS and fail on 64-bit OS) I've got it down to as simple a repro case as I can - it just tries to create a 'random' subkey then write a value to it. It works fine on my Win7 x86 box and fails on Win7 x64 and 2008 R2 x64, even when it's still a 32-bit process, even run from a 32-bit cmd prompt. EDIT: It also fails in the same way if it's a 64-bit process. on Win7 x86: INFO: Running as Admin in 32-bit process on 32-bit OS Was able to create Microsoft\Windows\CurrentVersion\RunOnceEx\a95b1bbf-7a04-4707-bcca-6aee6afbfab7 and write a value under it on Win7 x64, as 32-bit: INFO: Running as Admin in 32-bit process on 64-bit OS Unhandled Exception: System.UnauthorizedAccessException: Access to the registry key '\Microsoft\Windows\CurrentVersion\RunOnceEx\ce6d5ff6-c3af-47f7-b3dc-c5a1b9a3cd22' is denied. at Microsoft.Win32.RegistryKey.Win32Error(Int32 errorCode, String str) at Microsoft.Win32.RegistryKey.CreateSubKeyInternal(String subkey, RegistryKeyPermissionCheck permissionCheck, Object registrySecurityObj, RegistryOptions registryOptions) at Microsoft.Win32.RegistryKey.CreateSubKey(String subkey) at LoadAppKeyAndModify.Program.Main(String[] args) on Win7 x64, as 64-bit: INFO: Running as Admin in 64-bit process on 64-bit OS Unhandled Exception: System.UnauthorizedAccessException: Access to the registry key '\Microsoft\Windows\CurrentVersion\RunOnceEx\43bc857d-7d07-499c-8070-574d6732c130' is denied. at Microsoft.Win32.RegistryKey.Win32Error(Int32 errorCode, String str) at Microsoft.Win32.RegistryKey.CreateSubKeyInternal(String subkey, RegistryKeyPermissionCheck permissionCheck, Object registrySecurityObj, RegistryOptions registryOptions) at Microsoft.Win32.RegistryKey.CreateSubKey(String subkey, RegistryKeyPermissionCheck permissionCheck) at LoadAppKeyAndModify.Program.Main(String[] args) source: class Program { static void Main(string[] args) { Console.WriteLine("INFO: Running as {0} in {1}-bit process on {2}-bit OS", new WindowsPrincipal(WindowsIdentity.GetCurrent()).IsInRole(WindowsBuiltInRole.Administrator) ? "Admin" : "Normal User", Environment.Is64BitProcess ? 64 : 32, Environment.Is64BitOperatingSystem ? 64 : 32); if (args.Length != 1) { throw new ApplicationException("Need 1 argument - path to the software hive file on disk"); } string softwareHiveFile = Path.GetFullPath(args[0]); if (File.Exists(softwareHiveFile) == false) { throw new ApplicationException("Specified file does not exist: " + softwareHiveFile); } // pick a random subkey so it doesn't already exist var keyPathToCreate = "Microsoft\\Windows\\CurrentVersion\\RunOnceEx\\" + Guid.NewGuid(); var hKey = RegistryNativeMethods.RegLoadAppKey(softwareHiveFile); using (var safeRegistryHandle = new SafeRegistryHandle(new IntPtr(hKey), true)) using (var appKey = RegistryKey.FromHandle(safeRegistryHandle)) using (var runOnceExKey = appKey.CreateSubKey(keyPathToCreate)) { runOnceExKey.SetValue("foo", "bar"); Console.WriteLine("Was able to create {0} and write a value under it", keyPathToCreate); } } } internal static class RegistryNativeMethods { [Flags] public enum RegSAM { AllAccess = 0x000f003f } private const int REG_PROCESS_APPKEY = 0x00000001; // approximated from pinvoke.net's RegLoadKey and RegOpenKey // NOTE: changed return from long to int so we could do Win32Exception on it [DllImport("advapi32.dll", SetLastError = true)] private static extern int RegLoadAppKey(String hiveFile, out int hKey, RegSAM samDesired, int options, int reserved); public static int RegLoadAppKey(String hiveFile) { int hKey; int rc = RegLoadAppKey(hiveFile, out hKey, RegSAM.AllAccess, REG_PROCESS_APPKEY, 0); if (rc != 0) { throw new Win32Exception(rc, "Failed during RegLoadAppKey of file " + hiveFile); } return hKey; } }

  Read the article

• HOWTO: Migrate SharePoint site from one farm to another?

  - by Ramiz Uddin

  Hi Everyone, I've a site deployed on a developed machine. The site was developed under WSS 3.0 which contains custom List, Features, Templates, Styles etc. What I've to do is to create a deployment package (setup) which I can give away to my client. I know about stsadm but I don't have the access of the production machine. Is there a way I can package all the dependencies in a single file (installation file) and run on the server which will include all the dependencies (including site content)? I've tried to experiment this with SharePoint Content Deployment Wizard. It all went well when Export the site but always fail to Import with the following message: [2/2/2010 3:43:25 PM]: Start Time: 2/2/2010 3:43:25 PM. [2/2/2010 3:43:25 PM]: Progress: Initializing Import. [2/2/2010 3:43:42 PM]: FatalError: Could not find WebTemplate #75805 with LCID 1033. at Microsoft.SharePoint.Deployment.ImportRequirementsManager.VerifyWebTemplate(SPRequirementObject reqObj) at Microsoft.SharePoint.Deployment.ImportRequirementsManager.Validate(SPRequirementObject reqObj) at Microsoft.SharePoint.Deployment.ImportRequirementsManager.DeserializeAndValidate() at Microsoft.SharePoint.Deployment.SPImport.VerifyRequirements() at Microsoft.SharePoint.Deployment.SPImport.Run() [2/2/2010 3:43:48 PM]: Progress: Import Completed. [2/2/2010 3:43:48 PM]: Finish Time: 2/2/2010 3:43:48 PM. [2/2/2010 3:43:48 PM]: Completed with 0 warnings. [2/2/2010 3:43:48 PM]: Completed with 1 errors. [2/2/2010 3:44:51 PM]: Start Time: 2/2/2010 3:44:51 PM. [2/2/2010 3:44:51 PM]: Progress: Initializing Import. [2/2/2010 3:45:08 PM]: FatalError: Could not find WebTemplate #75805 with LCID 1033. at Microsoft.SharePoint.Deployment.ImportRequirementsManager.VerifyWebTemplate(SPRequirementObject reqObj) at Microsoft.SharePoint.Deployment.ImportRequirementsManager.Validate(SPRequirementObject reqObj) at Microsoft.SharePoint.Deployment.ImportRequirementsManager.DeserializeAndValidate() at Microsoft.SharePoint.Deployment.SPImport.VerifyRequirements() at Microsoft.SharePoint.Deployment.SPImport.Run() [2/2/2010 3:45:14 PM]: Progress: Import Completed. [2/2/2010 3:45:14 PM]: Finish Time: 2/2/2010 3:45:14 PM. [2/2/2010 3:45:14 PM]: Completed with 0 warnings. [2/2/2010 3:45:14 PM]: Completed with 1 errors. [2/2/2010 3:56:17 PM]: Start Time: 2/2/2010 3:56:17 PM. [2/2/2010 3:56:17 PM]: Progress: Initializing Import. [2/2/2010 3:56:34 PM]: FatalError: Could not find WebTemplate #75805 with LCID 1033. at Microsoft.SharePoint.Deployment.ImportRequirementsManager.VerifyWebTemplate(SPRequirementObject reqObj) at Microsoft.SharePoint.Deployment.ImportRequirementsManager.Validate(SPRequirementObject reqObj) at Microsoft.SharePoint.Deployment.ImportRequirementsManager.DeserializeAndValidate() at Microsoft.SharePoint.Deployment.SPImport.VerifyRequirements() at Microsoft.SharePoint.Deployment.SPImport.Run() [2/2/2010 3:56:39 PM]: Progress: Import Completed. [2/2/2010 3:56:39 PM]: Finish Time: 2/2/2010 3:56:39 PM. [2/2/2010 3:56:39 PM]: Completed with 0 warnings. [2/2/2010 3:56:39 PM]: Completed with 1 errors. I actually couldn't find a good reference on how to use it. But, this software doesn't something I'm looking for which can create a simple deployment package (after that you don't need to do anything). I might not be correct but after two days of googling I think there is no such utility (freeware) that can create a simple package of a site and install on other farm without even need to configure anything before you run the installation package. You people might have an advise which can help me to look/think outside the box and get to the solution quickly instead adding more days working on the problem. Please, share only freewares. I can't afford to buy anything. I'm waiting to be surprised with a good share :) Have a good day! Thanks.

  Read the article

• Convert NSData to primitive variable with ieee-754 or twos-complement ?

  - by William GILLARD

  Hi every one. I am new programmer in Obj-C and cocoa. Im a trying to write a framework which will be used to read a binary files (Flexible Image Transport System or FITS binary files, usually used by astronomers). The binary data, that I am interested to extract, can have various formats and I get its properties by reading the header of the FITS file. Up to now, I manage to create a class to store the content of the FITS file and to isolate the header into a NSString object and the binary data into a NSData object. I also manage to write method which allow me to extract the key values from the header that are very valuable to interpret the binary data. I am now trying to convert the NSData object into a primitive array (array of double, int, short ...). But, here, I get stuck and would appreciate any help. According to the documentation I have about the FITS file, I have 5 possibilities to interpret the binary data depending on the value of the BITPIX key: BITPIX value | Data represented 8 | Char or unsigned binary int 16 | 16-bit two's complement binary integer 32 | 32-bit two's complement binary integer 64 | 64-bit two's complement binary integer -32 | IEEE single precision floating-point -64 | IEEE double precision floating-point I already write the peace of code, shown bellow, to try to convert the NSData into a primitive array. // self reefer to my FITS class which contain a NSString object // with the content of the header and a NSData object with the binary data. -(void*) GetArray { switch (BITPIX) { case 8: return [self GetArrayOfUInt]; break; case 16: return [self GetArrayOfInt]; break; case 32: return [self GetArrayOfLongInt]; break; case 64: return [self GetArrayOfLongLong]; break; case -32: return [self GetArrayOfFloat]; break; case -64: return [self GetArrayOfDouble]; break; default: return NULL; } } // then I show you the method to convert the NSData into a primitive array. // I restrict my example to the case of 'double'. Code is similar for other methods // just change double by 'unsigned int' (BITPIX 8), 'short' (BITPIX 16) // 'int' (BITPIX 32) 'long lon' (BITPIX 64), 'float' (BITPIX -32). -(double*) GetArrayOfDouble { int Nelements=[self NPIXEL]; // Metod to extract, from the header // the number of element into the array NSLog(@"TOTAL NUMBER OF ELEMENTS [%i]\n",Nelements); //CREATE THE ARRAY double (*array)[Nelements]; // Get the total number of bits in the binary data int Nbit = abs(BITPIX)*GCOUNT*(PCOUNT + Nelements); // GCOUNT and PCOUNT are defined // into the header NSLog(@"TOTAL NUMBER OF BIT [%i]\n",Nbit); int i=0; //FILL THE ARRAY double Value; for(int bit=0; bit < Nbit; bit+=sizeof(double)) { [Img getBytes:&Value range:NSMakeRange(bit,sizeof(double))]; NSLog(@"[%i]:(%u)%.8G\n",i,bit,Value); (*array)[i]=Value; i++; } return (*array); } However, the value I print in the loop are very different from the expected values (compared using official FITS software). Therefore, I think that the Obj-C double does not use the IEEE-754 convention as well as the Obj-C int are not twos-complement. I am really not familiar with this two convention (IEEE and twos-complement) and would like to know how I can do this conversion with Obj-C. In advance many thanks for any help or information.

  Read the article

• What would cause ANY .NET application to crash immediately... except a project I create and Debug in

  - by blak3r

  My software recently got deployed to a customer who said that the application was crashing immediately after it started. After some initial debugging, the customer provided me remote access to one of the computers which was unable to run the application. I found that the crash wasn't specific to my application. Any application which depended on the .NET framework crashed immediately. Conveniently, Visual Studio 2008 was installed so I created a quick hello world application on it and clicked Debug. The application worked fine. But, then when I tried to execute the generated binaries in the /bin/Debug/HelloWorld.exe directory outside of visual studio it crashed. List of things i've tried (UPDATED): I checked that "Everyone" has Read&Execute permissions for c:\Windows. To test that the problem was with the .NET Framework (and not my application), I attempted to download Paint .NET on to the computers. The setup frontend crashed in the same manner. Performed a repair of the .NET framework as outlined in http://support.microsoft.com/kb/908077 (Boy was this fun and time consuming). No luck. Installed .NET 3.5 SP1 (before it just had .NET 3.5) Note: my application targets 2.0 so I did this more as a long shot... but i learned in the process that .NET 3.5 SP1 also updates the underlying frameworks. Ran Aaron Stebner's .NET Setup Verification Tool. This tool indicated that .NET was successfully installed. (I forget if i checked all the versions but at least 2.0 worked). Tested some mini hello world applications which were targeted for .NET 2.0 and .NET 3.5 and both crashed in the same way. Tried launching .NET apps via windbg cmd line. Doing this did allow me invoke my simple hello world applications. So, simple .NET hello world works when invoked by windbg or by launching via debug in visual studio... but doesn't if i try to execute it standalone. I created a dump file using WinDbg. It wasn't all that revealing to me. FAULTING_IP: mscorwks!PEImage::GetEntryPointToken+21 79f4ff9d f6401010 test byte ptr [eax+10h],10h EXCEPTION_RECORD: 0012f710 -- (.exr 0x12f710) ExceptionAddress: 79f4ff9d (mscorwks!PEImage::GetEntryPointToken+0x00000021) ExceptionCode: c0000005 (Access violation) ExceptionFlags: 00000000 NumberParameters: 2 Parameter[0]: 00000000 Parameter[1]: 00000010 Attempt to read from address 00000010 FAULTING_THREAD: 00000b44 PROCESS_NAME: MyProcess.exe ERROR_CODE: (NTSTATUS) 0x80000003 - {EXCEPTION} Breakpoint A breakpoint has been reached. EXCEPTION_CODE: (HRESULT) 0x80000003 (2147483651) - One or more arguments are invalid DETOURED_IMAGE: 1 NTGLOBALFLAG: 0 APPLICATION_VERIFIER_FLAGS: 0 MANAGED_STACK: !dumpstack -EE OS Thread Id: 0xb44 (0) Current frame: ChildEBP RetAddr Caller,Callee EXCEPTION_OBJECT: !pe cb10b4 Exception object: 00cb10b4 Exception type: System.ExecutionEngineException Message: <none> InnerException: <none> StackTrace (generated): <none> StackTraceString: <none> HResult: 80131506 MANAGED_OBJECT_NAME: System.ExecutionEngineException CONTEXT: 0012f72c -- (.cxr 0x12f72c) eax=00000000 ebx=00000000 ecx=00000000 edx=0000000e esi=001a1490 edi=00000001 eip=79f4ff9d esp=0012f9f8 ebp=0012fa1c iopl=0 nv up ei pl zr na pe nc cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00010246 mscorwks!PEImage::GetEntryPointToken+0x21: 79f4ff9d f6401010 test byte ptr [eax+10h],10h ds:0023:00000010=?? Resetting default scope READ_ADDRESS: 00000010 FOLLOWUP_IP: mscorwks!PEImage::GetEntryPointToken+21 79f4ff9d f6401010 test byte ptr [eax+10h],10h BUGCHECK_STR: APPLICATION_FAULT_NULL_CLASS_PTR_DEREFERENCE_SHUTDOWN PRIMARY_PROBLEM_CLASS: NULL_CLASS_PTR_DEREFERENCE_SHUTDOWN DEFAULT_BUCKET_ID: NULL_CLASS_PTR_DEREFERENCE_SHUTDOWN LAST_CONTROL_TRANSFER: from 79ef02b5 to 79f4ff9d STACK_TEXT: 79f4ff9d mscorwks!PEImage::GetEntryPointToken+0x21 79ef02b5 mscorwks!PEFile::GetEntryPointToken+0xa0 79eefeaf mscorwks!SystemDomain::ExecuteMainMethod+0xd4 79fb9793 mscorwks!ExecuteEXE+0x59 79fb96df mscorwks!_CorExeMain+0x15c 7900b1b3 mscoree!_CorExeMain+0x2c 7c817077 kernel32!BaseProcessStart+0x23 SYMBOL_STACK_INDEX: 0 SYMBOL_NAME: mscorwks!PEImage::GetEntryPointToken+21 FOLLOWUP_NAME: MachineOwner MODULE_NAME: mscorwks IMAGE_NAME: mscorwks.dll DEBUG_FLR_IMAGE_TIMESTAMP: 471ef729 STACK_COMMAND: .cxr 0012F72C ; kb ; dds 12f9f8 ; kb FAILURE_BUCKET_ID: NULL_CLASS_PTR_DEREFERENCE_SHUTDOWN_80000003_mscorwks.dll!PEImage::GetEntryPointToken BUCKET_ID: APPLICATION_FAULT_NULL_CLASS_PTR_DEREFERENCE_SHUTDOWN_DETOURED_mscorwks!PEImage::GetEntryPointToken+21 WATSON_STAGEONE_URL: http://watson.microsoft.com/StageOne/MyProcess_exe/2_4_4_39/4a8a192c/unknown/0_0_0_0/bbbbbbb4/80000003/00000000.htm?Retriage=1 Followup: MachineOwner Edit 1:The event log details for this error say it's a .NET Runtime version 2.0.50727.3053 - Fatal Execution Engine Error (7A097706)(80131506). Edit 2 (10-7-09): This issue is still active. Edit 3 (3-29-10): This update is to let everyone know that I never did successfully solve the problem. The customer who's machine this was on lost interest in solving it and just reimaged the machine :(. Thanks for all the contributions though.

  Read the article

• ssh permission denied

  - by Gitmo

  I am trying to ssh into a remote machine and I get the following debug messages: debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to xxx.xxx.x.xx [xxx.xxx.xx.x] port 22. debug1: Connection established. debug3: Not a RSA1 key file /home/hadoop/.ssh/id_rsa. debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /home/hadoop/.ssh/id_rsa type 1 debug1: Checking blacklist file /usr/share/ssh/blacklist.RSA-2048 debug1: Checking blacklist file /etc/ssh/blacklist.RSA-2048 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.1p1 Debian-6ubuntu2 debug1: match: OpenSSH_5.1p1 Debian-6ubuntu2 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.1p1 Debian-6ubuntu2 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-cbc hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 128/256 debug2: bits set: 511/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug3: check_host_in_hostfile: filename /home/hadoop/.ssh/known_hosts debug3: check_host_in_hostfile: match line 20 debug1: Host '192.168.1.63' is known and matches the RSA host key. debug1: Found key in /home/hadoop/.ssh/known_hosts:20 debug2: bits set: 511/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /home/hadoop/.ssh/id_rsa (0x241c110) debug1: Authentications that can continue: publickey,password debug3: start over, passed a different list publickey,password debug3: preferred gssapi-keyex,gssapi-with-mic,gssapi,publickey,keyboard-interactive debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering public key: /home/hadoop/.ssh/id_rsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey,password debug2: we did not send a packet, disable method debug1: No more authentication methods to try. Permission denied (publickey,password). What seems to be the problem?? I have tried everything, this is driving me nuts.

  Read the article

• [python] voice communication for python help!

  - by Eric

  Hello! I'm currently trying to write a voicechat program in python. All tips/trick is welcome to do this. So far I found pyAudio to be a wrapper of PortAudio. So I played around with that and got an input stream from my microphone to be played back to my speakers. Only RAW of course. But I can't send RAW-data over the netowrk (due the size duh), so I'm looking for a way to encode it. And I searched around the 'net and stumbled over this speex-wrapper for python. It seems to good to be true, and believe me, it was. You see in pyAudio you can set the size of the chunks you want to take from your input audiobuffer, and in that sample code on the link, it's set to 320. Then when it's encoded, its like ~40 bytes of data per chunk, which is fairly acceptable I guess. And now for the problem. I start a sample program which just takes the input stream, encodes the chunks, decodes them and play them (not sending over the network due testing). If I just let my computer idle and run this program it works great, but as soon as I do something, i.e start Firefox or something, the audio input buffer gets all clogged up! It just grows and then it all crashes and gives me an overflow error on the buffer.. OK, so why am I just taking 320 bytes of the stream? I could just take like 1024 bytes or something and that will easy the pressure on the buffer. BUT. If I give speex 1024 bytes of data to encode/decode, it either crashes and says that thats too big for its buffer. OR it encodes/decodes it, but the sound is very noisy and "choppy" as if it only encoded a tiny bit of that 1024 chunk and the rest is static noise. So the sound sounds like a helicopter, lol. I did some research and it seems that speex only can convert 320 bytes of data at time, and well, 640 for wide-band. But that's the standard? How can I fix this problem? How should I construct my program to work with speex? I could use a middle-buffer tho that takes all available data to read from the buffer, then chunk this up in 320 bits and encode/decode them. But this takes a bit longer time and seems like a very bad solution of the problem.. Because as far as I know, there's no other encoder for python that encodes the audio so it can be sent over the network in acceptable small packages, or? I've been googling for three days now. Also there is this pyMedia library, I don't know if its good to convert to mp3/ogg for this kind of software. Thank in in advance for reading this, hope anyone can help me! (:

  Read the article

• Linking LLVM JIT Code to Static LLVM Libraries?

  - by inflector

  I'm in the process of implementing a cross-platform (Mac OS X, Windows, and Linux) application which will do lots of CPU intensive analysis of financial data. The bulk of the analysis engine will be written in C++ for speed reasons, with a user-accessible scripting engine interfacing with the C++ testing engine. I want to write several scripting front-ends over time to emulate other popular software with existing large user bases. The first front will be a VisualBasic-like scripting language. I'm thinking that LLVM would be perfect for my needs. Performance is very important because of the sheer amount of data; it can take hours or days to run a single run of tests to get an answer. I believe that using LLVM will also allow me to use a single back-end solution while I implement different front-ends for different flavors of the scripting language over time. The testing engine itself will be separated from the interface and testing will even take place in a separate process with progress and results being reported to the testing management interface. Tests will consist of scripting code integrated with the testing engine code. In a previous implementation of a similar commercial testing system I wrote, I built a fast interpreter which easily interfaced with the testing library because it was written in C++ and linked directly to the testing engine library. Callbacks from scripting code to testing library objects involved translating between the formats with significant overhead. I'm imagining that with LLVM, I could implement the callbacks into C++ directly so that I could make the scripting code work almost as if it had been written in C++. Likewise, if all the code was compiled to LLVM byte-code format, it seems like the LLVM optimizers could optimize across the boundaries between the scripting language and the testing engine code that was written in C++. I don't want to have to compile the testing engine every time. Ideally, I'd like to JIT compile only the scripting code. For small tests, I'd skip some optimization passes, while for large tests, I'd perform full optimizations during the link. So is this possible? Can I precompile the testing engine to a .o object file or .a library file and then link in the scripting code using the JIT? Finally, ideally, I'd like to have the scripting code implement specific methods as subclasses for a specific C++ class. So the C++ testing engine would only see C++ objects while the JIT setup code compiled scripting code that implemented some of the methods for the objects. It seems that if I used the right name mangling algorithm it would be relatively easy to set up the LLVM generation for the scripting language to look like a C++ method call which could then be linked into the testing engine. Thus the linking stage would go in two directions, calls from the scripting language into the testing engine objects to retrieve pricing information and test state information and calls from the testing engine of methods of some particular C++ objects where the code was supplied not from C++ but from the scripting language. In summary: 1) Can I link in precompiled (either .bc, .o, or .a) files as part of the JIT compilation, code-generation process? 2) Can I link in code using that the process in 1) above in such a way that I am able to create code that acts as if it was all written in C++?

  Read the article

• Is this question too hard for a seasoned C++ architect?

  - by Monomer

  Background Information We're looking to hire a seasoned C++ architect (10+years dev, of which at least 6years must be C++ ) for a high frequency trading platform. Job advert says STL, Boost proficiency is a must with preferences to modern uses of C++. The company I work for is a Fortune 500 IB (aka finance industry), it requires passes in all the standard SHL tests (numeric, vocab, spatial etc) before interviews can commence. Everyone on the team was given the task of coming up with one question to ask the candidates during a written/typed test, please note this is the second test provided to the candidates, the first being Advanced IKM C++ test, done in the offices supervised and without internet access. People passing that do the second test. After roughly 70 candidates, my question has been determined to be statistically the worst performing - aka least number of people attempted it, furthermore even less people were able to give meaningful answers. Please note, the second test is not timed, the candidate can literally take as long as they like (we've had one person take roughly 10.5hrs) My question to SO is this, after SHL and IKM adv c++ tests, backed up with at least 6+ years C++ development experience, is it still ok not to be able to even comment about let alone come up with some loose strategy for solving the following question. The Question There is a class C with methods foo, boo, boo_and_foo and foo_and_boo. Each method takes i,j,k and l clock cycles respectively, where i < j, k < i+j and l < i+j. class C { public: int foo() {...} int boo() {...} int boo_and_foo() {...} int foo_and_boo() {...} }; In code one might write: C c; . . int i = c.foo() + c.boo(); But it would be better to have: int i = c.foo_and_boo(); What changes or techniques could one make to the definition of C, that would allow similar syntax of the original usage, but instead have the compiler generate the latter. Note that foo and boo are not commutative. Possible Solution We were basically looking for an expression templates based approach, and were willing to give marks to anyone who had even hinted or used the phrase or related terminology. We got only two people that used the wording, but weren't able to properly describe how they accomplish the task in detail. We use such techniques all over the place, due to the use of various mathematical operators for matrix and vector based calculations, for example to decide when to use IPP or hand woven implementations at compile time for a particular architecture and many other things. The particular area of software development requires microsecond response times. I believe could/should be able to teach a junior such techniques, but given the assumed caliber of candidates I expected a little more. Is this really a difficult question? Should it be removed? Or are we just not seeing the right candidates?

  Read the article

• SQLAlchemy session management in long-running process

  - by codeape

  Scenario: A .NET-based application server (Wonderware IAS/System Platform) hosts automation objects that communicate with various equipment on the factory floor. CPython is hosted inside this application server (using Python for .NET). The automation objects have scripting functionality built-in (using a custom, .NET-based language). These scripts call Python functions. The Python functions are part of a system to track Work-In-Progress on the factory floor. The purpose of the system is to track the produced widgets along the process, ensure that the widgets go through the process in the correct order, and check that certain conditions are met along the process. The widget production history and widget state is stored in a relational database, this is where SQLAlchemy plays its part. For example, when a widget passes a scanner, the automation software triggers the following script (written in the application server's custom scripting language): ' wiget_id and scanner_id provided by automation object ' ExecFunction() takes care of calling a CPython function retval = ExecFunction("WidgetScanned", widget_id, scanner_id); ' if the python function raises an Exception, ErrorOccured will be true ' in this case, any errors should cause the production line to stop. if (retval.ErrorOccured) then ProductionLine.Running = False; InformationBoard.DisplayText = "ERROR: " + retval.Exception.Message; InformationBoard.SoundAlarm = True end if; The script calls the WidgetScanned python function: # pywip/functions.py from pywip.database import session from pywip.model import Widget, WidgetHistoryItem from pywip import validation, StatusMessage from datetime import datetime def WidgetScanned(widget_id, scanner_id): widget = session.query(Widget).get(widget_id) validation.validate_widget_passed_scanner(widget, scanner) # raises exception on error widget.history.append(WidgetHistoryItem(timestamp=datetime.now(), action=u"SCANNED", scanner_id=scanner_id)) widget.last_scanner = scanner_id widget.last_update = datetime.now() return StatusMessage("OK") # ... there are a dozen similar functions My question is: How do I best manage SQLAlchemy sessions in this scenario? The application server is a long-running process, typically running months between restarts. The application server is single-threaded. Currently, I do it the following way: I apply a decorator to the functions I make avaliable to the application server: # pywip/iasfunctions.py from pywip import functions def ias_session_handling(func): def _ias_session_handling(*args, **kwargs): try: retval = func(*args, **kwargs) session.commit() return retval except: session.rollback() raise return _ias_session_handling # ... actually I populate this module with decorated versions of all the functions in pywip.functions dynamically WidgetScanned = ias_session_handling(functions.WidgetScanned) Question: Is the decorator above suitable for handling sessions in a long-running process? Should I call session.remove()? The SQLAlchemy session object is a scoped session: # pywip/database.py from sqlalchemy.orm import scoped_session, sessionmaker session = scoped_session(sessionmaker()) I want to keep the session management out of the basic functions. For two reasons: There is another family of functions, sequence functions. The sequence functions call several of the basic functions. One sequence function should equal one database transaction. I need to be able to use the library from other environments. a) From a TurboGears web application. In that case, session management is done by TurboGears. b) From an IPython shell. In that case, commit/rollback will be explicit. (I am truly sorry for the long question. But I felt I needed to explain the scenario. Perhaps not necessary?)

  Read the article

< Previous Page | 783 784 785 786 787 788 789 790 791 792 793 794  | Next Page >