Search Results

Search found 27472 results on 1099 pages for 'sql humor'.

Page 810/1099 | < Previous Page | 806 807 808 809 810 811 812 813 814 815 816 817  | Next Page >

  • PASS: Board Q&amp;A at the Summit

    - by Bill Graziano
    The last two years we’ve put the Board in front of the members and taken questions.  We’re going to do that again this year.  It will be in Room 307/308 from 12:15 to 1:30 on Friday. Yes, this time overlaps with the Birds of a Feather Lunch and the start of afternoon sessions – but only partially.  You can attend the Q&A and still get to parts of both of those.  There just isn’t a great time to do this.  Every time overlaps with something. We can’t do it after the last session on Friday.  We can’t fit it between the last session and the evening events on Wednesday or Thursday.  We had some discussion around breakfast time but I didn’t think that was realistic.  This is the least bad time we could come up with. Last year we had 60-70 people attend.  These are the items that were specific things that I could work on: The first question was whether to increase transparency around individual votes of Board members.  We approved this at the Board meeting the following day.  The only caveat was that if the Board is given confidential information as a basis for their vote then we may not be able to disclose individual votes.  Putting a Director in a position where they can’t publicly defend the reason for their vote is a difficult situation.  Thanks Kendal! Can we have a Board member discretionary fund?  As background, I took a couple of people to lunch so we could have a quiet place to talk.  I bought lunch but wasn’t able to expense it back to PASS.  We just don’t have a budget item for things like this.  I think we should.  I would guess the entire Board would like it also.  It was in an earlier version of the budget but came out as part of a cost-cutting move to balance the budget.  I’d like to see it added back in but we’ll have to see. I know there were a comments about the elections.  At this point we had created the Election Review Committee.  I’ve already written at length about this process. Where does IT work go?  PASS started to publish our internal management reports starting in December 2010.  You can find them on our Governance page.  These aren’t filtered at all and include a variety of information about IT projects.  The most recent update had roughly a page of updates related to IT.  Lots of the work was related to Summit and the Orator tool that we use to manage speaker submissions. There were numerous requests that Tina Turner not be repeated.  Done.  I don’t think we’ll do anything quite like that again.  We had a request for a payment plan for Summit.  We looked into this briefly but didn’t take any action.  We didn’t think the effort was worth the small number of people that would use it.  If you disagree, submit this on our Summit Feedback site and get some votes. There were lots of suggestions around the first-timers events – especially from first timers.  You can find all our current activities related to first-timers at the First Timers page on the Summit web site.  Plus links to 34 (!) blog posts on suggestions for first-timers.  And a big THANK YOU to Confio and Red Gate for sponsoring this. I hope you get the chance to attend.  These events are very helpful to me as a Board member.  I like being able to look around the room as comments are being made and see the audience reaction.  It helps me gauge the interest in an idea. I’d also like to direct you to the Summit Feedback site.  You can submit and vote on ideas to make the Summit a better experience.  As of right now we have the suggestions from last year still up.  We may reset these prior to the Summit though.

    Read the article

  • using sp_addrolemember

    - by Derek Dieter
    To add a user or group to a role, you need to use sp_addrolemember. This procedure is easy to use as it only accepts two parameters, the role name, and the username (or group). Roles are utilized in order to provide a layer of abstraction from permissions from being applied directly to users. While [...]

    Read the article

  • Where is a good place to start to learn about custom caching in .Net

    - by John
    I'm looking to make some performance enhancements to our site, but I'm not sure exactly where to begin. We have some custom object caching, but I think that we can do better. Our Business We aggregate news stories on a news type of web site. We get approximately 500-1000 new stories per week. We have index pages that show various lists of the items and details pages that show the individual stories. Our Current Use case: Getting an Individual Story User makes a request The Data Access Layer(DAL) checks to see if the item is in cache and if item is fresh (15 minutes). If the item is not in cache or is not fresh, retrieve the item from SQL Server, save to cache and return to user. Problems with this approach The pull nature of caching means that users have to pay the waiting cost every time that the cache is refreshed. Once a story is published, it changes infrequently and I think that we should replace the pull model with something better. My initial thoughts My initial thought is that stories should ALL be stored locally in some type of dictionary. (Cache or is there another, better way?). If the story is not found, then make a trip to the database, update the local dictionary and send the item back. Since there may be occasional updates to stories, this should be an entirely process from the user. I watched a video by Brent Ozar, How StackOverflow Scales SQL Server, in which Brent states "the fastest database query is the one that you don't make". Where do I start? At this point, I don't know exactly what the solution is. Is it caching? Is there a better way of using local storage? Do I use a Dictionary, OrderedDictionary, List ? It seems daunting and I'm just looking for some good starting points to learn more about how to do this type of optimization.

    Read the article

  • CodePlex Daily Summary for Monday, July 29, 2013

    CodePlex Daily Summary for Monday, July 29, 2013Popular ReleasesGIS Raster Tile Normalizer for GeoServer: V110 Extended to tile DEMs: 1) Now imports large DEM datasets. They are stored as 3.25 degree tiles in GeoTIFF 32 bit single band tiles ready to be used by GeoServer. Also, parallel colorized hillshade tiles are optionally created for easy visualization in GeoServer. 2) No longer uses FWTools, but the more recent 32 bit Windows 1.9 GDAL installation from Tamas at http://www.gisinternals.com/sdk/. Also required is Python 2.7, the GDAL Python Bindings from Tamas, and the Numpy python libraries. This is because we use th...R.NET: R.NET 1.5: The major changes in v1.5 are: Initialize method must be called before using R. Settings should be passed to the method. EagerEvaluate method renamed to Evaluate (use Defer method when you want old version of Evaluate).TX264: 0.9.7: --0.9.7 -Added: Encoding time will be shown in the log -Added: 64bit FLAC.exe -Added: Tx264 will now write version info file to its own folder -Added: Option to set encoder priorties (thx to XanaMuui&Ruriko) -Fixed: A possible error where source files were deleted -Updated: x264 to rev2345 -Updated: MediaInfo to 0.7.64 -Updated: MkvToolNix to 6.3.0 -Updated: FLAC to 1.3.0 -Updated: AlphaControls to 8.42 Stable -Updated: QAAC to 2.19 -Updated: SoX build with unicode by Lord_MulderMedia Companion: Media Companion MC3.574b: Some good bug fixes been going on with the new XBMC-Link function. Thanks to all who were able to do testing and gave feedback. New:* Added some adhoc extra General movie filters, one of which is Plot = Outline (see fixes above). To see the filters, add the following line to your config.xml: <ShowExtraMovieFilters>True</ShowExtraMovieFilters>. The others are: Imdb in folder name, Imdb in not folder name & Imdb not in folder name & year mismatch. * Movie - display <tag> list on browser tab ...OfflineBrowser: Preview Release with Search: I've added search to this release.VG-Ripper & PG-Ripper: VG-Ripper 2.9.46: changes FIXED LoginMath.NET Numerics: Math.NET Numerics v2.6.0: What's New in Math.NET Numerics 2.6 - Announcement, Explanations and Sample Code. New: Linear Curve Fitting Linear least-squares fitting (regression) to lines, polynomials and linear combinations of arbitrary functions. Multi-dimensional fitting. Also works well in F# with the F# extensions. New: Root Finding Brent's method. ~Candy Chiu, Alexander Täschner Bisection method. ~Scott Stephens, Alexander Täschner Broyden's method, for multi-dimensional functions. ~Alexander Täschner ...AJAX Control Toolkit: July 2013 Release: AJAX Control Toolkit Release Notes - July 2013 Release Version 7.0725July 2013 release of the AJAX Control Toolkit. AJAX Control Toolkit .NET 4.5 – AJAX Control Toolkit for .NET 4.5 and sample site (Recommended). AJAX Control Toolkit .NET 4 – AJAX Control Toolkit for .NET 4 and sample site (Recommended). AJAX Control Toolkit .NET 3.5 – AJAX Control Toolkit for .NET 3.5 and sample site (Recommended). Notes: - Instructions for using the AJAX Control Toolkit with ASP.NET 4.5 can be found at...MJP's DirectX 11 Samples: Specular Antialiasing Sample: Sample code to complement my presentation that's part of the Physically Based Shading in Theory and Practice course at SIGGRAPH 2013, entitled "Crafting a Next-Gen Material Pipeline for The Order: 1886". Demonstrates various methods of preventing aliasing from specular BRDF's when using high-frequency normal maps. The zip file contains source code as well as a pre-compiled x64 binary.English Practice Helper: English Practice Helper Demo v1.1: Fix some bug in sentences compareKartris E-commerce: Kartris v2.5003: This fixes an issue where search engines appear to identify as IE and so trigger the noIE page if there is not a non-responsive skin specified.Blue Mercs Data Gateway: Blue Mercs Data Gateway 2.0: Changes made for major release v2.0 build in support for Microsoft Access Database build in logging support (with optional stopwatch duration) implemented thread DbContext that can be referenced to share context accross layers implented 'having' sql keyword implemented 'top(n)' and 'first' sql keywords implemented 'distinct' sql keyword implemented sql column expressions implemented CTE (common table expressions) joins are refactored allow auto join on keys when using entiti...Wix Test: WIX Test Bootstrapper (Burn): WIX Test Bootstrapper and MSI setup files. Alfa versions.ScriptZilla: ScriptZilla 1.2.5.1: New Programming Languages(C++ too !) and An Better Editor.SSISConnectionBuilder: Alpha 2: Removed SSIS SDK dependencies.VBDownloader: VBDownloader 1.0: VBDownloader v1.0 The open source solution for downloads First releasemysqllib: mysqllib 1.5: La nuova versione 1.5 vede espandersi questa libreria con nuovi metodi e nuove caratteristiche interessanti. Ecco i cambiamenti: (NEW) Aggiunta classe MySqlTable per visualizzare tutti i dettagli della tabella, tra cui una lista di dettagli delle colonne (NEW) Aggiunta classe MySqlColumn per visualizzare tutti i dettagli della colonna, tra cui una lista dei valori della colonna (NEW) Nuovi metodi GetTable(...) e GetColumn(...) per risultati dettagliati di tabelle e colonne (NEW) Nuovi met...GoAgent GUI: GoAgent GUI 1.3.5 Alpha (20130723): ????????Alpha?,???????????,?????????????。 ??????????GoAgent???(???phus lu?GitHub??????GoAgent??????,??????????????????) ????????????????????????Bug ?????????。??????????????。 ????issue????,????????,????????????????。LogicCircuit: LogicCircuit 2.13.07.22: Logic Circuit - is educational software for designing and simulating logic circuits. Intuitive graphical user interface, allows you to create unrestricted circuit hierarchy with multi bit buses, debug circuits behavior with oscilloscope, and navigate running circuits hierarchy. Changes of this versionYou can make visual elements of the circuit been visible on its symbols. This way you can build composite displays, keyboards and reuse them. Please read about displays for more details http://ww...LINQ to Twitter: LINQ to Twitter v2.1.08: Supports .NET 3.5, .NET 4.0, .NET 4.5, Silverlight 4.0, Windows Phone 7.1, Windows Phone 8, Client Profile, Windows 8, and Windows Azure. 100% Twitter API coverage. Also supports Twitter API v1.1! Also on NuGet.New Projects#Zyan Drench, a game for Android: Zyan Drench is a simple yet very entertaining game for Android phones developed using Zyan Communication Framework: http://zyan.com.de Crzy Game Launcher: All in one game launcher and updater. Keep your game up-to-date with this simple to use launcher.Ecobee API: This project is a portable .NET Library wrapping the Ecobee Thermostat API.Fire-Fighting Kinect Game: Fire-Fighting Kinect Game A fire-fighting game that uses Vizard virtual reality software and the Microsoft Kinect to allow the player to put out virtual fires.Fish Atlantis: This is our homework.FreeBee 900 Pro - Open Source XBee® Pro Alternative: https://hg.codeplex.com/freebee900proFuelRex: FuelRex foi feito pra lhe ajudar em seu dia a dia. Facilite seus cálculos e obtenha números reais sobre o gasto de combustíveis, em um aplicativo totalmente.KbdPlayground: A collection of .NET helpers and experimentsMailChimpNET: MailChimpNET provides a .NET PCL based wrapper around the mailchimp.com web API.MVC Generator: Addin for Visual Studio that generates MVC from Entity Framework files. A Rapid Scaffolder with options.One More ENgine project: OMEN projet (One More ENgine) main objective is to provide a simple application container.Orchard Podcasts: The Orchard Podcasting module allows users to create and publish a podcast feed (Yahoo Media RSS) for consumption by users using Orchard v1.6+.Outlook 2013 Backup Add-In: Automatically backups psd-files after closing Outlook. This plugin is compatible with Outlook 2013 32/64 Bit Version. Project Emilie: A little help to make your WinRT XAML projects truly fast and fluid, based on work from two of the top Windows 8 applications.Search WPF: A small utility to browse the WPF classes and interfaces.sGaming: Silverlight 3D EngineTelerik Connect: Simple ASP.NET Project aiming to build a copy of the LinkedIn website functionality.Testing The Unittesting Tools in Visual Studio: This project is a collection of testprograms for verifying the different test adapters available for Visual Studio. TvLinks Torrent Searcher: Easy way to search Torrents for TV Series.xnaGaming: XNA game engine

    Read the article

  • Geek City: Clearing Plans for a Single Database

    - by Kalen Delaney
    I know Friday afternoon isn't the best time for blogging, as everyone is going home now, and by Monday morning, this post will be old news. But I'm not shutting down just yet, and a something came up this week that I just realized not everybody knew about, so I decided to blog it. Many (or most?) of you are aware that you can clear all cached plans using DBCC FREEPROCCACHE. In addition, there are certain configuration options, for which changing their values will cause all plans in cache to be removed....(read more)

    Read the article

  • 24 Hours of PASS: 15 Powerful Dynamic Management Objects - Deck and Demos

    - by Adam Machanic
    Thank you to everyone who attended today's 24 Hours of PASS webcast on Dynamic Management Objects! I was shocked, awed, and somewhat scared when I saw the attendee number peak at over 800. I really appreciate your taking time out of your day to listen to me talk. It's always interesting presenting to people I can't see or hear, so I relied on Twitter for a form of nearly real-time feedback. I would like to especially thank everyone who left me tweets both during and after the presentation. Your feedback...(read more)

    Read the article

  • Could my 64-bit server be somehow identifying itself as a 32-bit server?

    - by Deane
    Has anyone ever heard of a 64-bit OS identifying itself as a 32-bit OS? We have a Windows Server 2008 R2 x64 development server. We've been trying to activate it with a product key from MSDN, but it keeps telling us the the key is invalid. I've opened a ticket with MSDN for this. Then something odd happened -- I tried to install a 64-bit version of SQL Server 2005. After it extracted, we got this message: This version of hotfix.exe is not compatible with the version of Windows you're running. Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program... Now, we're pretty sure this is a 64-bit OS. Computer Properties says: System Type: 64-bit Operating System Also, we have both a "Program Files" and a "Program Files (x64)" directory. I don't know how the product key activator or the SQL install program attempts to divine the type of OS, but could it be...wrong?

    Read the article

  • Passiionate about Microsoft Technology - Help raise money for Cystic Fibrosis Foundation

    - by Testas
    I need your help! Please sign up to help our team raise $10,000 for Cystic Fibrosis Foundation. Simply by becoming a team member (a bit like a fan) and you will be helping our team earn points and advance in the race to rasie the money for charity.   If you can tick any of the boxes below then we need your help: Already Microsoft Certified? Hold a MCP/MCSA/MCSE/MCT/TS/MCITP? Want to help sufferers from the most common genetically inherited disease? Passionate about Microsoft Technology? Like to Blog, Tweet, email, connect! Enjoy the thrill of the race! Follow the Born To Learn Blog? Join our blue team and help us become the leader of the race.so please sign in with your Live ID which is associated with your MCP account and register with us - also take a look at the blue forums - we are building up some cool info! http://bit.ly/blueteam  or  http://borntolearn.mslearn.net/prix/p/index.aspx Please blog and let people know about this! Regards Chris

    Read the article

  • Building a Redundant / Distrubuted Application

    - by MattW
    This is more of a "point me in the right direction" question. I (and my team of 3) have built a hosted web app that queues and routes customer chat requests to available customer service agents (It does other things as well, but this is enough background to illustrate the issue). The basic dev architecture today is: a single page ajax web UI (ASP.NET MVC) with floating chat windows (think Gmail) a backend Windows service to queue and route the chat requests this service also logs the chats, calculates service levels, etc a Comet server product that routes data between the web frontend and the backend Windows service this also helps us detect which Agents are still connected (online) And our hardware architecture today is: 2 servers to host the web UI portion of the application a load balancer to route requests to the 2 different web app servers a third server to host the SQL Server DB and the backend Windows service responsible for queuing / delivering chats So as it stands today, one of the web app servers could go down and we would be ok. However, if something would happen to the SQL Server / Windows Service server we would be boned. My question - how can I make this backend Windows service logic be able to be spread across multiple machines (distributed)? The Windows service is written to accept requests from the Comet server, check for available Agents, and route the chat to those agents. How can I make this more distributed? How can I make it so that I can distribute the work of the backend Windows service can be spread across multiple machines for redundancy and uptime purposes? Will I need to re-write it with distributed computing in mind? I should also note that I am hosting all of this on Rackspace Cloud instances - so maybe it is something I should be less concerned about? Thanks in advance for any help!

    Read the article

  • Oracle Linked Servers on Windows Server 2008 R2

    - by John Paul Cook
    Oracle hasn’t yet released versions of its client software for Windows Server 2008 R2. If you need to create an Oracle linked server, that’s a problem. You’ll see this installation block when attempting to install the Oracle client software for Windows Server 2008: It’s very simple to fix. Check the first checkbox to make the installer ignore the version check. Click Next and ignore the warning you’ll see. The installation should complete successfully. Windows does offer various strategies for mitigating...(read more)

    Read the article

  • Service Accounts LastLogonTimestamp

    - by Ryan Ries
    In an Active Directory domain, if I configure a Windows service on a domain member computer to start with an AD user account (aka "ye olde service account",) and the then the service stays running but I don't restart the service or reboot the machine for a year... does the LastLogonTimestamp of the service account's user object continue to update? Edit: If you say "it depends on the service," then use MS SQL Server as an example. I set MSSQL Engine to run as contoso\sql-service. Then I leave it alone for a year.

    Read the article

  • Your Next IT Job

    - by BuckWoody
    Some data professionals have worked (and plan to work) in the same place for a long time. In organizations large and small, the turnover rate just isn’t that high. This has not been my experience. About every 3-5 years I’ve changed either roles or companies. That might be due to the IT environment or my personality (or a mix of the two), but the point is that I’ve had many roles and worked for many companies large and small throughout my 27+ years in IT. At one point this might have been a detriment – a prospective employer looks at the resume and says “it seems you’ve moved around quite a bit.” But I haven’t found that to be the case all the time –in fact, in some cases the variety of jobs I’ve held has been an asset because I’ve seen what works (and doesn’t) in other environments, which can save time and money. So if you’re in the first camp – great! Stay where you are, and continue doing the work you love. but if you’re in the second, then this post might be useful. If you are planning on making a change, or perhaps you’ve hit a wall at your current location, you might start looking around for a better paying job – and there’s nothing wrong with that. We all try to make our lives better, and for some that involves more money. Money, however, isn’t always the primary motivator. I’ve gone to another job that doesn’t have as many benefits or has the same salary as the current job I’m working to gain more experience, get a better work/life balance and so on. It’s a mix of factors that only you know about. So I thought I would lay out a few advantages and disadvantages in the shops I’ve worked at. This post isn’t aimed at a single employer, but represents a mix of what I’ve experienced, and of course the opinions here are my own. You will most certainly have a different take – if so, please post a response! I also won’t mention a specific industry – I’ve worked everywhere from medical firms, legal offices, retail, billing centers, manufacturing, government, even to NASA. I’m focusing here mostly on size and composition. And I’m making some very broad generalizations here – I am fully aware that a small company might have great benefits and a large company might allow a lot of role flexibility.  your mileage may vary – and again, post those comments! Small Company To me a “small company” means around 100 people or less – sometimes a lot less. These can be really fun, frustrating places to to work. Advantages: a great deal of flexibility, a wide range of roles (often at the same time), a large degree of responsibility, immediate feedback, close relationships with co-workers, work directly with your customer. Disadvantages: Too much responsibility, little work/life balance, immature political structure, few (if any) benefits. If the business is family-owned, they can easily violate work/life boundaries. Medium Size company In my experience the next size company I would work for involves from a few hundred people to around five thousand. Advantages: Good mobility – fairly easy to get promoted, acceptable benefits, more defined responsibilities, better work/life balance, balanced load for expertise, but still the organizational structure is fairly simple to understand. Disadvantages: Pay is not always highest, rapid changes in structure as the organization grows, transient workforce. You may not be given the opportunity to work with another technology if someone already “owns” it. Politics are painful at this level as people try to learn how to do it. Large Company When you get into the tens of thousands of folks employed around the world, you’re in a large company. Advantages: Lots of room to move around – sometimes you can work (as I have) multiple jobs through the years and yet stay at the same company, building time for benefits, very defined roles, trained managers (yes, I know some of them are still awful – trust me – I DO know that), higher-end benefits, long careers possible, discounts at retailers and other “soft” benefits, prestige. For some, a higher level of politics (done professionally) is a good thing. Disadvantages: You could become another faceless name in the crowd, might not allow a great deal of flexibility,  large organizational changes might take away any control you have of your career. I’ve also seen large layoffs happen, and good people get let go while “dead weight” is retained. For some, a higher level of politics is distasteful. So what are your experiences? Share with the group! Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • Ola Hallengren adds STATISTICS support to his solution

    - by AaronBertrand
    Last week, Ola published a very useful update to his Backup, Integrity Check and Index Optimization scripts : the solution now supports updating statistics. There are several options, such as only updating when the data has been modified and using the RESAMPLE and NORECOMPUTE options. An example call: EXEC dbo.IndexOptimize @Databases = 'USER_DATABASES' , @FragmentationHigh_LOB = 'INDEX_REBUILD_OFFLINE' , @FragmentationHigh_NonLOB = 'INDEX_REBUILD_ONLINE' , @FragmentationMedium_LOB = 'INDEX_REORGANIZE_STATISTICS_UPDATE'...(read more)

    Read the article

  • Providing a public Web-Hosting service on MS Windows - advice and resources

    - by crgnz
    Are there any resources offering advice on how to setup a microsoft based web-hosting service? I currently offer LAMP hosting with cPanel, but there is some demand for IIS & SQL Server. As far as I can tell MS Windows Web Server 2008 R2 edition allows unlimited IIS connections. And a per-processor license for MS SQL Server Web Edition 2008 also permits unlimited connections. Where I am falling down is that I can't figure out how to get "unlimited" Active Directory users. I can't use 2008R2 Web Server edition for AD, so I will need the 2008R2 standard edition, I think. Does Microsoft have a provision for using AD in an ISP scenario? I am looking at using the cPanel Enkompas system to manage the Windows software, and Enkompas requires AD for user authentication. Any advice would be greatly appreciated!

    Read the article

  • Presenting at Roanoke Code Camp Saturday!

    - by andyleonard
    Introduction I am honored to once again be selected to present at Roanoke Code Camp ! An Introductory Topic One of my presentations is titled "I See a Control Flow Tab. Now What?" It's a Level 100 talk for those wishing to learn how to build their very first SSIS package. This highly-interactive, demo-intense presentation is for beginners and developers just getting started with SSIS. Attend and learn how to build SSIS packages from the ground up . Designing an SSIS Framework I'm also presenting...(read more)

    Read the article

  • Presenting at PASS Summit 2011!

    - by andyleonard
    Introduction I am honored to be presenting at the PASS Summit 2011 11-14 Oct 2011 in Seattle! This year, I was selected to present a regular session and a pre-conference session. The pre-con is going to be fun. It’s a team effort with Tim Mitchell ( Blog | @Tim_Mitchell | SQLPeople ) and – even though he isn’t listed as a presenter – Matt Masson ( Blog | @mattmasson ). Like me, Tim’s been using SSIS since it was released; and Matt’s on the SSIS developer team at Microsoft – he helps build SSIS! Our...(read more)

    Read the article

  • Oracle Index Skip Scan

    - by jchang
    There is a feature, called index skip scan that has been in Oracle since version 9i. When I across this, it seemed like a very clever trick, but not a critical capability. More recently, I have been advocating DW on SSD in approrpiate situations, and I am thinking this is now a valuable feature in keeping the number of nonclustered indexes to a minimum. Briefly, suppose we have an index with key columns: Col1 , Col2 , in that order. Obviously, a query with a search argument (SARG) on Col1 can use...(read more)

    Read the article

  • PASS: Bylaw Change 2013

    - by Bill Graziano
    PASS launched a Global Growth Initiative in the Summer of 2011 with the appointment of three international Board advisors.  Since then we’ve thought and talked extensively about how we make PASS more relevant to our members outside the US and Canada.  We’ve collected much of that discussion in our Global Growth site.  You can find vision documents, plans, governance proposals, feedback sites, and transcripts of Twitter chats and town hall meetings.  We also address these plans at the Board Q&A during the 2012 Summit. One of the biggest changes coming out of this process is around how we elect Board members.  And that requires a change to the bylaws.  We published the proposed bylaw changes as a red-lined document so you can clearly see the changes.  Our goal in these bylaw changes was to address the changes required by the global growth initiatives, conduct a legal review of the document and address other minor issues in the document.  There are numerous small wording changes throughout the document.  For example, we replaced every reference of “The Corporation” with the word “PASS” so it now reads “PASS is organized…”. Board Composition The biggest change in these bylaw changes is how the Board is composed and elected.  This discussion starts in section VI.2.  This section now says that some elected directors will come from geographic regions.  I think this is the best way to make sure we give all of our members a voice in the leadership of the organization.  The key parts of this section are: The remaining Directors (i.e. the non-Officer Directors and non-Vendor Appointed Directors) shall be elected by the voting membership (“Elected Directors”). Elected Directors shall include representatives of defined PASS regions (“Regions”) as set forth below (“Regional Directors”) and at minimum one (1) additional Director-at-Large whose selection is not limited by region. Regional Directors shall include, but are not limited to, two (2) seats for the Region covering Canada and the United States of America. Additional Regions for the purpose of electing additional Regional Directors and additional Director-at-Large seats for the purpose of expanding the Board shall be defined by a majority vote of the current Board of Directors and must be established prior to the public call for nominations in the general election. Previously defined Regions and seats approved by the Board of Directors shall remain in effect and can only be modified by a 2/3 majority vote by the then current Board of Directors. Currently PASS has six At-Large Directors elected by the members.  These changes allow for a Regional Director position that is elected by the members but must come from a particular region.  It also stipulates that there must always be at least one Director-at-Large who can come from any region. We also understand that PASS is currently a very US-centric organization.  Our Summit is held in America, roughly half our chapters are in the US and Canada and most of the Board members over the last ten years have come from America.  We wanted to reflect that by making sure that our US and Canadian volunteers would continue to play a significant role by ensuring that two Regional seats are reserved specifically for Canada and the US. Other than that, the bylaws don’t create any specific regional seats.  These rules allow us to create Regional Director seats but don’t require it.  We haven’t fully discussed what the criteria will be in order for a region to have a seat designated for it or how many regions there will be.  In our discussions we’ve broadly discussed regions for United States and Canada Europe, Middle East, and Africa (EMEA) Australia, New Zealand and Asia (also known as Asia Pacific or APAC) Mexico, South America, and Central America (LATAM) As you can see, our thinking is that there will be a few large regions.  I’ve also considered a non-North America region that we can gradually split into the regions above as our membership grows in those areas.  The regions will be defined by a policy document that will be published prior to the elections. I’m hoping that over the next year we can begin to publish more of what we do as Board-approved policy documents. While the bylaws only require a single non-region specific At-large Director, I would expect we would always have two.  That way we can have one in each election.  I think it’s important that we always have one seat open that anyone who is eligible to run for the Board can contest.  The Board is required to have any regions defined prior to the start of the election process. Board Elections – Regional Seats We spent a lot of time discussing how the elections would work for these Regional Director seats.  Ultimately we decided that the simplest solution is that every PASS member should vote for every open seat.  Section VIII.3 reads: Candidates who are eligible (i.e. eligible to serve in such capacity subject to the criteria set forth herein or adopted by the Board of Directors) shall be designated to fill open Board seats in the following order of priority on the basis of total votes received: (i) full term Regional Director seats, (ii) full term Director-at-Large seats, (iii) not full term (vacated) Regional Director seats, (iv) not full term (vacated) Director-at-Large seats. For the purposes of clarity, because of eligibility requirements, it is contemplated that the candidates designated to the open Board seats may not receive more votes than certain other candidates who are not selected to the Board. We debated whether to have multiple ballots or one single ballot.  Multiple ballot elections get complicated quickly.  Let’s say we have a ballot for US/Canada and one for Region 2.  After that we’d need a mechanism to merge those two together and come up with the winner of the at-large seat or have another election for the at-large position.  We think the best way to do this is a single ballot and putting the highest vote getters into the most restrictive seats.  Let’s look at an example: There are seats open for Region 1, Region 2 and at-large.  The election results are as follows: Candidate A (eligible for Region 1) – 550 votes Candidate B (eligible for Region 1) – 525 votes Candidate C (eligible for Region 1) – 475 votes Candidate D (eligible for Region 2) – 125 votes Candidate E (eligible for Region 2) – 75 votes In this case, Candidate A is the winner for Region 1 and is assigned that seat.  Candidate D is the winner for Region 2 and is assigned that seat.  The at-large seat is filled by the high remaining vote getter which is Candidate B. The key point to understand is that we may have a situation where a person with a lower vote total is elected to a regional seat and a person with a higher vote total is excluded.  This will be true whether we had multiple ballots or a single ballot.  Board Elections – Vacant Seats The other change to the election process is for vacant Board seats.  The actual changes are sprinkled throughout the document. Previously we didn’t have a mechanism that allowed for an election of a Board seat that we knew would be vacant in the future.  The most common case is when a Board members moves to an Officer role in the middle of their term.  One of the key changes is to allow the number of votes members have to match the number of open seats.  This allows each voter to express their preference on all open seats.  This only applies when we know about the opening prior to the call for nominations.  This all means that if there’s a seat will be open at the start of the next Board term, and we know about it prior to the call for nominations, we can include that seat in the elections.  Ultimately, the aim is to have PASS members decide who sits on the Board in as many situations as possible. We discussed the option of changing the bylaws to just take next highest vote-getter in all other cases.  I think that’s wrong for the following reasons: All voters aren’t able to express an opinion on all candidates.  If there are five people running for three seats, you can only vote for three.  You have no way to express your preference between #4 and #5. Different candidates may have different information about the number of seats available.  A person may learn that a Board member plans to resign at the end of the year prior to that information being made public. They may understand that the top four vote getters will end up on the Board while the rest of the members believe there are only three openings.  This may affect someone’s decision to run.  I don’t think this creates a transparent, fair election. Board members may use their knowledge of the election results to decide whether to remain on the Board or not.  Admittedly this one is unlikely but I don’t want to create a situation where this accusation can be leveled. I think the majority of vacancies in the future will be handled through elections.  The bylaw section quoted above also indicates that partial term vacancies will be filled after the full term seats are filled. Removing Directors Section VI.7 on removing directors has always had a clause that allowed members to remove an elected director.  We also had a clause that allowed appointed directors to be removed.  We added a clause that allows the Board to remove for cause any director with a 2/3 majority vote.  The updated text reads: Any Director may be removed for cause by a 2/3 majority vote of the Board of Directors whenever in its judgment the best interests of PASS would be served thereby. Notwithstanding the foregoing, the authority of any Director to act as in an official capacity as a Director or Officer of PASS may be suspended by the Board of Directors for cause. Cause for suspension or removal of a Director shall include but not be limited to failure to meet any Board-approved performance expectations or the presence of a reason for suspension or dismissal as listed in Addendum B of these Bylaws. The first paragraph is updated and the second and third are unchanged (except cleaning up language).  If you scroll down and look at Addendum B of these bylaws you find the following: Cause for suspension or dismissal of a member of the Board of Directors may include: Inability to attend Board meetings on a regular basis. Inability or unwillingness to act in a capacity designated by the Board of Directors. Failure to fulfill the responsibilities of the office. Inability to represent the Region elected to represent Failure to act in a manner consistent with PASS's Bylaws and/or policies. Misrepresentation of responsibility and/or authority. Misrepresentation of PASS. Unresolved conflict of interests with Board responsibilities. Breach of confidentiality. The bold line about your inability to represent your region is what we added to the bylaws in this revision.  We also added a clause to section VII.3 allowing the Board to remove an officer.  That clause is much less restrictive.  It doesn’t require cause and only requires a simple majority. The Board of Directors may remove any Officer whenever in their judgment the best interests of PASS shall be served by such removal. Other There are numerous other small changes throughout the document. Proxy voting.  The laws around how members and Board members proxy votes are specific in Illinois law.  PASS is an Illinois corporation and is subject to Illinois laws.  We changed section IV.5 to come into compliance with those laws.  Specifically this says you can only vote through a proxy if you have a written proxy through your authorized attorney.  English language proficiency.  As we increase our global footprint we come across more members that aren’t native English speakers.  The business of PASS is conducted in English and it’s important that our Board members speak English.  If we get big enough to afford translators, we may be able to relax this but right now we need English language skills for effective Board members. Committees.  The language around committees in section IX is old and dated.  Our lawyers advised us to clean it up.  This section specifically applies to any committees that the Board may form outside of portfolios.  We removed the term limits, quorum and vacancies clause.  We don’t currently have any committees that this would apply to.  The Nominating Committee is covered elsewhere in the bylaws. Electronic Votes.  The change allows the Board to vote via email but the results must be unanimous.  This is to conform with Illinois state law. Immediate Past President.  There was no mechanism to fill the IPP role if an outgoing President chose not to participate.  We changed section VII.8 to allow the Board to invite any previous President to fill the role by majority vote. Nominations Committee.  We’ve opened the language to allow for the transparent election of the Nominations Committee as outlined by the 2011 Election Review Committee. Revocation of Charters. The language surrounding the revocation of charters for local groups was flagged by the lawyers. We have allowed for the local user group to make all necessary payment before considering returning of items to PASS if required. Bylaw notification. We’ve spent countless meetings working on these bylaws with the intent to not open them again any time in the near future. Should the bylaws be opened again, we have included a clause ensuring that the PASS membership is involved. I’m proud that the Board has remained committed to transparency and accountability to members. This clause will require that same level of commitment in the future even when all the current Board members have rolled off. I think that covers everything.  I’d encourage you to look through the red-line document and see the changes.  It’s helpful to look at the language that’s being removed and the language that’s being added.  I’m happy to answer any questions here or you can email them to [email protected].

    Read the article

  • Less Useful Soft Skills

    - by andyleonard
    Introduction This post is the fifty-sixth part of a ramble-rant about the software business. The current posts in this series can be found on the series landing page . Over a career that spans decades, one encounters useful and “less useful” soft skills in the modern enterprise. I thought I would share a few of the less useful variety: Free Advice If someone asks another for advice, that’s a cool compliment. The person asking has seen something that compels them to seek information about how-another-does-or-sees-things....(read more)

    Read the article

  • Just when you thought it was safe..........

    - by GrumpyOldDBA
    One of my duties is to handle software releases to our Production system, as is my want I always run my eye down any schema changes, this new object stood out for a number of reasons. I may add this to my interview questions: SET ANSI_NULLS ON SET QUOTED_IDENTIFIER ON GO IF NOT EXISTS ( SELECT 1 FROM INFORMATION_SCHEMA.TABLES WHERE TABLE_SCHEMA= 'dbo' AND TABLE_NAME= 'MSPaymentForExtraction' ) BEGIN CREATE TABLE [dbo].[MSPaymentForExtraction]([MSPaymentID] [ int ] NOT NULL IDENTITY...(read more)

    Read the article

  • SQL2K8R2: StreamInsight changes at RTM: Hopping Windows

    - by Greg Low
    We've been working on updating our demos and samples for the RTM changes of StreamInsight. I'll detail these as I come across them. The first is that there is a change to the HoppingWindow. The first two parameters are the same in the constructor but the third parameter is now required. It is the HoppingWindowOutputPolicy. Currently, there is only a single option for this which is ClipToWindowEnd. So you can create a HoppingWindow like this: var queryOutput = from w in input.HoppingWindow ( TimeSpan...(read more)

    Read the article

  • Possible SWITCH Optimization in DAX – #powerpivot #dax #tabular

    - by Marco Russo (SQLBI)
    In one of the Advanced DAX Workshop I taught this year, I had an interesting discussion about how to optimize a SWITCH statement (which could be frequently used checking a slicer, like in the Parameter Table pattern). Let’s start with the problem. What happen when you have such a statement? Sales :=     SWITCH (         VALUES ( Period[Period] ),         "Current", [Internet Total Sales],         "MTD", [MTD Sales],         "QTD", [QTD Sales],         "YTD", [YTD Sales],          BLANK ()     ) The SWITCH statement is in reality just syntax sugar for a nested IF statement. When you place such a measure in a pivot table, for every cell of the pivot table the IF options are evaluated. In order to optimize performance, the DAX engine usually does not compute cell-by-cell, but tries to compute the values in bulk-mode. However, if a measure contains an IF statement, every cell might have a different execution path, so the current implementation might evaluate all the possible IF branches in bulk-mode, so that for every cell the result from one of the branches will be already available in a pre-calculated dataset. The price for that could be high. If you consider the previous Sales measure, the YTD Sales measure could be evaluated for all the cells where it’s not required, and also when YTD is not selected at all in a Pivot Table. The actual optimization made by the DAX engine could be different in every build, and I expect newer builds of Tabular and Power Pivot to be better than older ones. However, we still don’t live in an ideal world, so it could be better trying to help the engine finding a better execution plan. One student (Niek de Wit) proposed this approach: Selection := IF (     HASONEVALUE ( Period[Period] ),     VALUES ( Period[Period] ) ) Sales := CALCULATE (     [Internet Total Sales],     FILTER (         VALUES ( 'Internet Sales'[Order Quantity] ),         'Internet Sales'[Order Quantity]             = IF (                 [Selection] = "Current",                 'Internet Sales'[Order Quantity],                 -1             )     ) )     + CALCULATE (         [MTD Sales],         FILTER (             VALUES ( 'Internet Sales'[Order Quantity] ),             'Internet Sales'[Order Quantity]                 = IF (                     [Selection] = "MTD",                     'Internet Sales'[Order Quantity],                     -1                 )         )     )     + CALCULATE (         [QTD Sales],         FILTER (             VALUES ( 'Internet Sales'[Order Quantity] ),             'Internet Sales'[Order Quantity]                 = IF (                     [Selection] = "QTD",                     'Internet Sales'[Order Quantity],                     -1                 )         )     )     + CALCULATE (         [YTD Sales],         FILTER (             VALUES ( 'Internet Sales'[Order Quantity] ),             'Internet Sales'[Order Quantity]                 = IF (                     [Selection] = "YTD",                     'Internet Sales'[Order Quantity],                     -1                 )         )     ) At first sight, you might think it’s impossible that this approach could be faster. However, if you examine with the profiler what happens, there is a different story. Every original IF’s execution branch is now a separate CALCULATE statement, which applies a filter that does not execute the required measure calculation if the result of the FILTER is empty. I used the ‘Internet Sales’[Order Quantity] column in this example just because in Adventure Works it has only one value (every row has 1): in the real world, you should use a column that has a very low number of distinct values, or use a column that has always the same value for every row (so it will be compressed very well!). Because the value –1 is never used in this column, the IF comparison in the filter discharge all the values iterated in the filter if the selection does not match with the desired value. I hope to have time in the future to write a longer article about this optimization technique, but in the meantime I’ve seen this optimization has been useful in many other implementations. Please write your feedback if you find scenarios (in both Power Pivot and Tabular) where you obtain performance improvements using this technique!

    Read the article

  • CodePlex Daily Summary for Monday, June 18, 2012

    CodePlex Daily Summary for Monday, June 18, 2012Popular Releases????: ????2.0.2: 1、???????????。 2、DJ???????10?,?????????10?。 3、??.NET 4.5(Windows 8)????????????。 4、???????????。 5、??????????????。 6、???Windows 8????。 7、?????2.0.1???????????????。 8、??DJ?????????。Azure Storage Explorer: Azure Storage Explorer 5 Preview 1 (6.17.2012): Azure Storage Explorer verison 5 is in development, and Preview 1 provides an early look at the new user interface and some of the new features. Here's what's new in v5 Preview 1: New UI, similar to the new Windows Azure HTML5 portal Support for configuring and viewing storage account logging Support for configuring and viewing storage account monitoring Uses the Windows Azure 1.7 SDK libraries Bug fixesXDA ROM Hub: XDA ROM Hub v0.35 Beta: Download and install stock ROM -- Not all ROMS are online. Flash CWM On locked bootloader. Root. Unroot. Flash kernels. Flash system image Erase system. Erase boot. Erase Data and Cache. Install update.zip. Install ROM addons. Install Boot animations. Unlock bootloader. Please rate and reviewCodename 'Chrometro': Developer Preview: Welcome to the Codename 'Chrometro' Developer Preview! This is the very first public preview of the app. Please note that this is a highly primitive build and the app is not even half of what it is meant to be. The Developer Preview sports the following: 1) An easy to use application setup. 2) The Assistant which simplifies your task of customization. 3) The partially complete Metro UI. 4) A variety of settings 5) A partially complete web browsing experience To get started, download the Ins...????????API for .Net SDK: SDK for .Net ??? Release 2: 6?17????? ??? - .net 4.0 SDK??Dynamic??????????????????API?? ??? - ?Utility?????????API??????DateTime???ParseUTCDate ?? - ?????????????Json.net???,???SDK????Json.net?????。 ?? - ???Client??????API???GetCommand?PostCommand,?????????????????API??。 ?? - ???????,??????API?,??????API???,???string???,??Entity?Dynamic????????API??????????。 ?? - ???Entity???????API??IEnumerable<T>??????????JSON????????。(??@???HZM??BUG??) ??? ??????????,??????Release 2??Demo????。??????Demo???????SDK for .Net...Cosmos (C# Open Source Managed Operating System): Release 92560: Prerequisites Visual Studio 2010 - Any version including Express. Express users must also install Visual Studio 2010 Integrated Shell runtime VMWare - Cosmos can run on real hardware as well as other virtualization environments but our default debug setup is configured for VMWare. VMWare Player (Free). or Workstation VMWare VIX API 1.11AutoUpdaterdotNET : Autoupdate for VB.NET and C# Developer: AutoUpdater.NET 1.1: Release Notes *New feature added that allows user to select remind later interval.Sumzlib: API document: API documentMicrosoft SQL Server Product Samples: Database: AdventureWorks 2008 OLTP Script: Install AdventureWorks2008 OLTP database from script The AdventureWorks database can be created by running the instawdb.sql DDL script contained in the AdventureWorks 2008 OLTP Script.zip file. The instawdb.sql script depends on two path environment variables: SqlSamplesDatabasePath and SqlSamplesSourceDataPath. The SqlSamplesDatabasePath environment variable is set to the default Microsoft ® SQL Server 2008 path. You will need to change the SqlSamplesSourceDataPath environment variable to th...HigLabo: HigLabo_20120613: Bug fix HigLabo.Mail Decode header encoded by CP1252Jasc (just another script compressor): 1.3.1: Updated Ajax Minifier to 4.55.WipeTouch, a jQuery touch plugin: 1.2.0: Changes since 1.1.0: New: wipeMove event, triggered while moving the mouse/finger. New: added "source" to the result object. Bug fix: sometimes vertical wipe events would not trigger correctly. Bug fix: improved tapToClick handler. General code refactoring. Windows Phone 7 is not supported, yet! Its behaviour is completely broken and would require some special tricks to make it work. Maybe in the future...Phalanger - The PHP Language Compiler for the .NET Framework: 3.0.0.3026 (June 2012): Fixes: round( 0.0 ) local TimeZone name TimeZone search compiling multi-script-assemblies PhpString serialization DocDocument::loadHTMLFile() token_get_all() parse_url()BlackJumboDog: Ver5.6.4: 2012.06.13 Ver5.6.4  (1) Web???????、???POST??????????????????SharePoint XSL Templates: SPXSLT 0.0.9: Added new template FixAmpersands. Fixed the contents of the MultiSelectValueCheck.xsl file, which was missing the stylesheet wrapper.ExcelFileEditor: .CS File: nothingWeapsy - ASP.NET MVC CMS: 1.0.0 RC: - Upgrade to Entity Framework 4.3.1 - Added AutoMapper custom version (by nopCommerce Team) - Added missed model properties and localization resources of Plugin Definitions - Minor changes - Fixed some bugsXenta Framework - extensible enterprise n-tier application framework: Xenta Framework 1.8.0 Beta: Catalog and Publication reviews and ratings Store language packs in data base Improve reporting system Improve Import/Export system A lot of WebAdmin app UI improvements Initial implementation of the WebForum app DB indexes Improve and simplify architecture Less abstractions Modernize architecture Improve, simplify and unify API Simplify and improve testing A lot of new unit tests Codebase refactoring and ReSharpering Utilize Castle Windsor Utilize NHibernate ORM ...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.55: Properly handle IE extension to CSS3 grammar that allows for multiple parameters to functional pseudo-class selectors. add new switch -braces:(new|same) that affects where opening braces are placed in multi-line output. The default, "new" puts them on their own new line; "same" outputs them at the end of the previous line. add new optional values to the -inline switch: -inline:(force|noforce), which can be combined with the existing boolean value via comma-separators; value "force" (which...Microsoft Media Platform: Player Framework: MMP Player Framework 2.7 (Silverlight and WP7): Additional DownloadsSMFv2.7 Full Installer (MSI) - This will install everything you need in order to develop your own SMF player application, including the IIS Smooth Streaming Client. It only includes the assemblies. If you want the source code please follow the link above. Smooth Streaming Sample Player - This is a pre-built player that includes support for IIS Smooth Streaming. You can configure the player to playback your content by simplying editing a configuration file - no need to co...New ProjectsApp Fabric Module for Orchard CMS: App Fabric Module for Orchard CMSBBInterfaceNET: BBInterfaceNET is a visual designer for building Blackberry user interfaces.Blackbird Environment: Blackbird is a scalable and asynchronous emulator written for the FUSE protocol, as used by Habbo Hotel.Codename 'Chrometro': This project, inspired by the Metro UI of Windows 8 and Windows Phone, is a Windows Forms Browser coded in VB.NET. The special part is that, it maintains the convention of a traditional desktop environment, so that you won't need to have Windows 8 installed to use it, yet it very eloquently blends in parts of the Metro interface. The key features of Metro, namely "Simple", "Clean" and "Modern" are quite evident in this browser. Opinions, suggestions, feedback, etc. are welcome and they'll ...Deep Framework: Deep Framework is a c# based functional framework thats parted in "Modes". So, you can develop faster and you get clean and not so much code.DeeWeibo: WP7???????,OAuth2.0??,????V2??,?????Donkey Cleaner: Aplicación que limpia posibles programas maliciosos.EKA-ASB Information Management: simple web appFeedback Browser: Application that manages all TFSPreview Feedback Requests assigned to you.guoc: guoc is a free projectITOWNSOS: Project for order of service managementMad Library: Mad Library is free open source .NET framework library which provides many accelerations of normal programming with preprogrammed functions.MyMiniDataMgr: This is a private proj. Just for c# exercise.NameDay Webservice: This is a webservice about the namedays in some countries. It is able to tell the name of today, or spec date, or when will be.NBi: NBi is a testing framework (add-on to NUnit) for Microsoft Business Intelligence platform and Data Access.News Press: News Press is simple blogging application by ASP.NET MVC and EF CodeFirst.numbers spiral: Spiral numeric matrix builder console application.Pdf to xml biztalk pipeline: Pdf 2 xml biztalk pipelineQuran Bookmark for WP7: If you keep forgetting where you have reached reading the Quran, then this is the application for you. Set your bookmark and you will never forget again.soping: ReleaseTelerik Projects: This is my implementation of the Convex Hull Algorithm (Graham Scan Method).test03: ??TestAProRobin: edit project summary & details... URL .codeplex.com Title Logo Project Title Only Logo Only Logo with title right bottom Logo with title right WP7 Pushpin Clusterer: WP7 pushpin clusterer is a project that makes clustering pushpins on the bing maps control in your Windows Phone app easy.YAVBSM: This is going to be a VirtualBox Service Manager for Microsoft Windows Systems.

    Read the article

  • Indexed view deadlocking

    - by Dave Ballantyne
    Deadlocks can be a really tricky thing to track down the root cause of.  There are lots of articles on the subject of tracking down deadlocks, but seldom do I find that in a production system that the cause is as straightforward.  That being said,  deadlocks are always caused by process A needs a resource that process B has locked and process B has a resource that process A needs.  There may be a longer chain of processes involved, but that is the basic premise. Here is one such (much simplified) scenario that was at first non-obvious to its cause: The system has two tables,  Products and Stock.  The Products table holds the description and prices of a product whilst Stock records the current stock level. USE tempdb GO CREATE TABLE Product ( ProductID INTEGER IDENTITY PRIMARY KEY, ProductName VARCHAR(255) NOT NULL, Price MONEY NOT NULL ) GO CREATE TABLE Stock ( ProductId INTEGER PRIMARY KEY, StockLevel INTEGER NOT NULL ) GO INSERT INTO Product SELECT TOP(1000) CAST(NEWID() AS VARCHAR(255)), ABS(CAST(CAST(NEWID() AS VARBINARY(255)) AS INTEGER))%100 FROM sys.columns a CROSS JOIN sys.columns b GO INSERT INTO Stock SELECT ProductID,ABS(CAST(CAST(NEWID() AS VARBINARY(255)) AS INTEGER))%100 FROM Product There is a single stored procedure of GetStock: Create Procedure GetStock as SELECT Product.ProductID,Product.ProductName FROM dbo.Product join dbo.Stock on Stock.ProductId = Product.ProductID where Stock.StockLevel <> 0 Analysis of the system showed that this procedure was causing a performance overhead and as reads of this data was many times more than writes,  an indexed view was created to lower the overhead. CREATE VIEW vwActiveStock With schemabinding AS SELECT Product.ProductID,Product.ProductName FROM dbo.Product join dbo.Stock on Stock.ProductId = Product.ProductID where Stock.StockLevel <> 0 go CREATE UNIQUE CLUSTERED INDEX PKvwActiveStock on vwActiveStock(ProductID) This worked perfectly, performance was improved, the team name was cheered to the rafters and beers all round.  Then, after a while, something else happened… The system updating the data changed,  The update pattern of both the Stock update and the Product update used to be: BEGIN TRAN UPDATE... COMMIT BEGIN TRAN UPDATE... COMMIT BEGIN TRAN UPDATE... COMMIT It changed to: BEGIN TRAN UPDATE... UPDATE... UPDATE... COMMIT Nothing that would raise an eyebrow in even the closest of code reviews.  But after this change we saw deadlocks occuring. You can reproduce this by opening two sessions. In session 1 begin transaction Update Product set ProductName ='Test' where ProductID = 998 Then in session 2 begin transaction Update Stock set Stocklevel = 5 where ProductID = 999 Update Stock set Stocklevel = 5 where ProductID = 998 Hop back to session 1 and.. Update Product set ProductName ='Test' where ProductID = 999 Looking at the deadlock graphs we could see the contention was between two processes, one updating stock and the other updating product, but we knew that all the processes do to the tables is update them.  Period.  There are separate processes that handle the update of stock and product and never the twain shall meet, no reason why one should be requiring data from the other.  Then it struck us,  AH the indexed view. Naturally, when you make an update to any table involved in a indexed view, the view has to be updated.  When this happens, the data in all the tables have to be read, so that explains our deadlocks.  The data from stock is read when you update product and vice-versa. The fix, once you understand the problem fully, is pretty simple, the apps did not guarantee the order in which data was updated.  Luckily it was a relatively simple fix to order the updates and deadlocks went away.  Note, that there is still a *slight* risk of a deadlock occurring, if both a stock update and product update occur at *exactly* the same time.

    Read the article

  • How to Manage Technical Employees

    - by Ajarn Mark Caldwell
    In my current position as Software Engineering Manager I have been through a lot of ups and downs with staffing, ranging from laying-off everyone who was on my team as we went through the great economic downturn in 2007-2008, to numerous rounds of interviewing and hiring contractors, full-time employees, and converting some contractors to employee status.  I have not yet blogged much about my experiences, but I plan to do that more in the next few months.  But before I do that, let me point you to a great article that somebody else wrote on The Unspoken Truth About Managing Geeks that really hits the target.  If you are a non-technical person who manages technical employees, you definitely have to read that article.  And if you are a technical person who has been promoted into management, this article can really help you do your job and communicate up the line of command about your team.  When you move into management with all the new and different demands put on you, it is easy to forget how things work in the tech subculture, and to lose touch with your team.  This article will help you remember what’s going on behind the scenes and perhaps explain why people who used to get along great no longer are, or why things seem to have changed since your promotion. I have to give credit to Andy Leonard (blog | twitter) for helping me find that article.  I have been reading his series of ramble-rants on managing tech teams, and the above article is linked in the first rant in the series, entitled Goodwill, Negative and Positive.  I have read a handful of his entries in this series and so far I pretty much agree with everything he has said, so of course I would encourage you to read through that series, too.

    Read the article

< Previous Page | 806 807 808 809 810 811 812 813 814 815 816 817  | Next Page >