Search Results

Search found 1228 results on 50 pages for 'asus'.

Page 9/50 | < Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >

• asus n550jv audio problem: no sound from notebook' speakers

  - by skywalker

  Ubuntu 13.10. The problem is: the internal speakers don't work. I have no problem when I'm using the headphones. There is no hardware issue since in windows 8 everything works perfectly(external subwoofer included). I'm trying to modify /etc/modprobe.d/alsa-base.conf but I can't find the correct model to put into: options snd-hda-intel model= The file HD-Audio-Models.txt doesn't contain the model for ALC668. Some info: :~sudo aplay -l **** List of PLAYBACK Hardware Devices **** card 0: MID [HDA Intel MID], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: MID [HDA Intel MID], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: MID [HDA Intel MID], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: PCH [HDA Intel PCH], device 0: ALC668 Analog [ALC668 Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 :~$ sudo lspci -v | grep -A7 -i "audio" 00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06) Subsystem: Intel Corporation Device 2010 Flags: bus master, fast devsel, latency 0, IRQ 52 Memory at f7a14000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Kernel driver in use: snd_hda_intel -- 00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 04) Subsystem: ASUSTeK Computer Inc. Device 11cd Flags: bus master, fast devsel, latency 0, IRQ 53 Memory at f7a10000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel PS info :~$ amixer -c 0 Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'IEC958',1 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'IEC958',2 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] :~$ pacmd dump-volumes Welcome to PulseAudio! Use "help" for usage information. Sink 0: reference = 0: 76% 1: 76%, real = 0: 76% 1: 76%, soft = 0: 100% 1: 100%, current_hw = 0: 76% 1: 76%, save = yes Input 8: volume = 0: 100% 1: 100%, reference_ratio = 0: 100% 1: 100%, real_ratio = 0: 100% 1: 100%, soft = 0: 100% 1: 100%, volume_factor = 0: 100% 1: 100%, volume_factor_sink = 0: 100% 1: 100%, save = no Source 0: reference = 0: 100% 1: 100%, real = 0: 100% 1: 100%, soft = 0: 100% 1: 100%, current_hw = 0: 100% 1: 100%, save = no Source 1: reference = 0: 16% 1: 16%, real = 0: 16% 1: 16%, soft = 0: 100% 1: 100%, current_hw = 0: 16% 1: 16%, save = yes

  Read the article

• Asus Eee PC 701 4G hangs on boot

  - by Andrew

  I've got an old Eee PC 701 4G with the following specifications: 512 MB RAM 4GB SSD drive SM223AC 8GB SD card extension Screen resolution: 800 x 480 BIOS Revision 1101 (05/16/2008) EC Firmware version: EPC-079 Windows XP SP3 works fine on it, but I decided to switch my OS to Ubuntu. I have downloaded an Ubuntu 10.10 Netbook Remix ISO and wrote it to my FAT32 SD card using Universal-USB-Installer-1.8.3.3, as described on ubuntu.com During standard load from the SD card the boot process hangs up with black screen. If I'll press F6 while preloading Ubuntu, it sucessfully displays the boot menu, selecting language and showing 2 main commands: "Run ubuntu from USB drive" and "Install Ubuntu". Selecting either of these commands leading to the same result - after some background work the main loading indicator is displayed ("Ubuntu" text with dotted progress bar under it), and it's progressing forever without any effect. Is Ubuntu 10.10 compatible with my Eee PC at all? How to boot it correctly?

  Read the article

• Cant install 12.04.1 or 12.10 in Asus GT75VW laptop

  - by Software companies in perth

  I got this new laptop that comes with a 256 GB ssd drive 128 GB are used for the preinstalled Windows 7 I want to install Ubuntu on the other 128 Gb. I first installed 12.10, it worked and booted once into the OS bu then it started booting onto a black screen so i tried with 12.04.1, i tried installing it a few times with the normal and alternate installer but after saying the installation was OK, it boots onto this distorted graphics screen with a purpelish background where you can't do anything.... What do i do?

  Read the article

• Inconsistent booting problem 12.04LTS on Asus U46E RAL7

  - by G. He

  The laptop is dual booting with windows 7 and ubuntu 11.10. For 11.10 to boot, I had to add 'nolapic' in GRUB boot options. I downloaded 12.04LTS LiveCD yesterday and made a CD and a bootable USB stick. With both USB and LiveCD, occasionally I can boot into 12.04. But many times, the boot process stuck at some point. For USB boot, sometime it works. But other times, it seems to stuck right after seeing the message: NMI watchdog enabled. takes one hw-pmu counted [0.408590] #2 The number in [] changes. Some times it stuck at #2, and sometimes at #3. For LiveCD boot, sometime it works. But when it stuck, it stuck at different places. At times, the boot process go directly to a blank screen with a blink '_' at up left corner. Sometime it went a bit further, after showing options to try/install ubuntu then stuck with a blank screen with blink '_'. Anything I can do to get around of this?

  Read the article

• Skype Review: Asus Videophone Touch AiGuru SV1T

  The wireless SV1T lets you make Skype video calls without being tethered to &#151; or even in the same room as &#151; a PC.

  Read the article

• Can't get Optimus to work with Ironhide on an Asus N53SN

  - by Musaab

  I installed Ubuntu 11.10 (Same issue in 11.04 btw) and then I installed Ironhide. I went through the configuration, chose the one with the highest confirmation for my system and tested it: > Error: Module nvidia does not exist in /proc/modules > P50 Disabling nVidia Card Succeded (the spelling error is theirs) And it changes nothing. I tried other configurations and got worse results. This has really become a major headache. Any solutions?

  Read the article

• Unable to install 12.10 on asus r500v

  - by bmdr38

  I have been unable to get beyond the grub boot screen of the live dvd/usb. The Try Ubuntu without installing, Install Ubuntu, etc menu shows, and I have tried adding/replacing nomodeset and no splash with neither helping. Even "Check disc for defects" does not display anything when selected. I am at a complete loss as to how to fix this one. I have had many successful installs in the past, but this is definitely a first for me. Just as FYI, Gfx card: Geforce GT 635M I realize this particular card has Optimus on it, however even the alternative boot/command line install fails to load. Any help would be appreciated. I realize there have been multiple threads on this, but none of the methods within them have solved this yet. Thanks

  Read the article

• Hybrid Graphics Functional won't work with my Asus UL30V anymore

  - by futuress

  The problem is that I am no longer able to boot in compatibility mode for just turning on my Nvidia graphics to install the driver. Because no login screen will appear if Ubuntu is loading. In Ubuntu 11.10 I was able to activate nvidia graphics only' option this way: 1) Change BIOS to 'compatibility mode' which will turn off the Intel card. 2) Install the Nvidia proprietary driver using Ubuntu's driver finder (Additional Drivers) and then reboot. I was not interested using only the Intel graphics, for the sake of battery life. Now I have both cards running and they drain my battery life dramatically. And the main problem of this configuration no OpenGL is available, so I can't play any games any more. At this point, I have a pre-solution. I uninstalled the nvidia drivers and installed bumblebee. Now the Intel card is recognized. I would prefer to run just the nvidia card as in Ubuntu 11.10 but for now this is better than nothing. Does anybody else have the same problem?

  Read the article

• Ubuntu 12.04 Asus Eee PC 1005 weird keyboard

  - by radioheads

  After upgrading to 12.04 on my netbook the keyboard got weird behaviour Before logging in to any session everything's OK (i tested the input in vt1) but as i log in with any session (unity or unity-2d) keyboard behaves as if Fn key was pressed (i got numbers and special symbols instead of normal chars. I think the problem may be in acpi support, but i don't know where to start exactly. I will appreciate any help =) P.S. Sorry for my english - I am not a native speaker =)

  Read the article

• Trying to update Asus BIOS: FreeDOS crashes

  - by ZekeDroid

  My UX31 zenbook is experiencing some weird shutdown behavior when the battery drops below 50% and the internet seems to agree that updating the BIOS is a good step forward since there were issue with the kernel before. I downloaded both the correct BIOS file and the windows 7 utility tool and now need to boot FreeDOS to run, however, I've tried every method out there and they all fail (or so I think): Using unetbootin's FreeDOS 1.0 image I get to an error saying it couldn't run drivers then I get to a command line on disk A:. I assumed a dead end. Using unetbootin but with the FreeDOS 1.1 version image downloaded directly: get an error of "bad or missing command interpreter". I looked online and the solutions didn't work either. So, is there an alternative to FreeDOS or to installing a BIOS that I could use?

  Read the article

• failure to upgrade to 13.10 on ASUS 1015E-DS03

  - by user211270

  How should I proceed? On my last step to reach 13.10, after the download and installation and removal of unwanted packages, and after the reboot, I received this message: Sorry, a problem occurred while installing software. Package: i915-dkms The details revealed: Package i915-dkms 0.1 [origin: unknown] Problem Type Package Title i915-dkms 0.1: i915 kernel modele failed to build ApportVersion 2.12.5-0ubuntu2.1 Architecture amd64 DKMSBuildLog DKMSKernelVersion 3.11.0-12-generic Date Sun Nov 3 19:49:38 2013 Dependencies DistributionChannelDescriptor This is a distribution channel descriptor For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-annan-standard-precise-amd64-20130106-0 DistroRelease Ubuntu 13.10 InstallationDate Installed on 2013-01-24 (283 days ago) Thanks for any help, Bob Pendleton

  Read the article

• Ubuntu 12.10 not properply working on Asus u46E after Update

  - by John Oakland

  I recently installed the latest Ubuntu update on my laptop and since then, the alignment on the browser is messed up, the mouse is not working, and I can't connect to the internet. Before it was working perfectly. Any ideas on what to do? Thanks for any feedback FYI: I am right now using windows since I have both linux and windows on my laptop. Also, when booting I do have the option to boot previous ubuntu versions, when I boot the previous unbuntu version on my laptop, everything works accept except the internet. (the mouse works, alignment is proper)

  Read the article

• Windows 7 doesnt boot after installing Ubuntu 12.10 (Asus Zenbook Prime / UEFI problem)

  - by jpdus

  Today I installed Ubuntu and since then i cannot boot into Windows anymore. I used the "standard" option (didnt change any partitions manually, just entered the size) but used the UEFI-mode. At first the GRUB entries for Windows did not work at all, after reading this thead i was able to add a new Grub entry - now i can get into the "windows-loading" screen for a few seconds but then i always see some kind of bluescreen for a fraction of a second and the laptop reboots. I can get into the windows recovery partition but the only option there is to reset everything to factory settings (+erase all data). I have no idea how to get into the Windows 7 repair mode which was mentioned here (tried everything else in this thread too - no success). My boot info can be found here: http://paste.ubuntu.com/1411573/ I have no idea what went wrong (there is even an extra page for the Zenbook Prime where no installation problems are mentioned). I would appreciate any help/ideas, many thanks!

  Read the article

• issues with ASUS S301L ultrabooks

  - by Wuerze

  I just like to tell you what still is a Problem in Ubuntu 14.04 and should be solved for a nice experience of this distribution. Unfortunately I do not have any hints to tell you, because I am just a user and know not much about programming. Anyway, I hope it helps. 1) Intel open source Graphics issues (proprietary) -when attaching HDMI-cable the screen switches to the external monitor and it's fine, but there is no switching back unless restart with HDMI deattached -black screen appears for like 2 seconds as if I would change screen in the settings; frequency increases with intensity of driver use (i.e. videos or video games) 2) hotkeys (commonly recognised) -there is no possibility to adjust brightness with the hotkeys (Fn+F5 and Fn+F6) 3) touchscreen (commonly recognised) -the touchscreen is behaving like a mouse -configuring gestures for the multi touch screen seems to always end in disabling touch pad gestures 4) panel symbols -battery symbol has got a low accuracy while it determines accurately the energy left; only 5 steps of energy are shown by the symbol Thank you all for participating in the solution of these problems! I will stay tuned and edit this list if something has been solved.

  Read the article

• ASUS Xonar DG not working Ubuntu

  - by thephpdev

  I've checked the "Questions that may already have your answer" to no avail. Basically, there is no sound at all, the snd_oxygen drivers are all being loaded. I can see the sound card and all of it's separate ports in Settings-Sound-Output, but nothing is coming out. I tried adjusting the volume in alsamixer, but for some reason the volume won't change (all that is there are some options [Speakers, Headphones, FP Headphones] and they change when I press the up/down arrow keys) at all. I have also tried many other terminal commands, such as reloading alsa and checking if the sound card is even being detected, which it is. I'm left clueless. It says on a bug report that this has been unassigned for over a year. Surely that's not right. Thanks in advance, Caelan.

  Read the article

• ASUS VX-6 Laptop Wireless not connecting

  - by user2152790

  Someone posted a script a couple days ago, here is my output.Pastebin I can see wifi SSIDs in network, but cannot connect to mine. The only time wifi worked on 13.10 was in the Live CD, but wifi stopped working as soon as install process started. Did below but made no difference. sudo apt-get install bcmwl-kernel-source sudo modprobe -rv brcmsmac sudo modprobe -v wl What I do next? I tried Software&Updates and it showed 1 proprietary driver in use. This sounds like a WPA/WPA2 issue? Wifi works when I tried Zorin OS 7.1, wifi always worked in windows 7.

  Read the article

• Asus K50I sound issues

  - by MrStatic

  I have an Asus K50IJ (Bestbuy) laptop and have issues with my sound. Speakers themselves work fine but when I plug into the headphone jack it auto mutes the front channel and no sounds comes out of either the speakers or the headphones. If I then unmute the channel I get sound from both the speakers and the headphones. alsamixer shows the Headphone channel as all grayed out. /etc/modprobe.d/alsa-base.conf I have tried snd-hda-intel model="asus-laptop" and snd-hda-intel model="asus" In Sound Preferences I have gone to output and changed the Connector to 'Analog Headphones' that results in no sound from either speakers or headphones. As one forum suggested I tried to comment out blacklist snd_pcsp in the blacklist.conf which resulted in no change. lspci -v shows: 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) Subsystem: Santa Cruz Operation Device 1043 Flags: bus master, fast devsel, latency 0, IRQ 45 Memory at fe9f4000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel Capabilities: [130] Root Complex Link Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel

  Read the article

• Asus PCE-N53 11n N600 PCI-E Adapter on 3.x kernel

  - by CITguy

  Problem ASUS PCE-N53 wireless NIC doesn't work for latest versions of the linux kernel. How do I get it working on my system? (Note: I'm posting the answer I've found for others to use.) Installing Driver for Linux 3.x Kernel ASUS provides Linux drivers from their website, but it mentions that the driver supports "Linux Kernel 2.6.x", so it won't work without a some modifications to the driver code. Fortunately, an archlinux forum mentions similar problems and one user was able to create a patch for kernel 3.8.x that seems to work with kernel 3.11.x. Here's how I got it working: Prerequisites Ubuntu: sudo apt-get install build-essential Arch: sudo pacman -S base-devel Steps: 1. Download the driver from the ASUS website The download can be found under "Support Drivers & Tools". 2. Unzip the contents of the downloaded file cd into the new directory 3. Patch The arch forum mentions a 3.8 patch file that needs to be downloaded. Download rt5592sta_fix_64bit_3.8.patch to the current directory. tar -xvf {driver_source.tar.gz} cd into the directory created in previous step patch -p1 < ../rt5592sta_fix_64bit_3.8.patch 4. Compile NOTE: You will need to use sudo for it to compile properly. sudo make sudo make install sudo modprobe rt5592sta 5. Enjoy If all is well, you should now have a working card.

  Read the article

• Xbox Music ignores Asus FN media keys in Desktop Mode

  - by Ruud Lenders

  I have an Asus PRO64JQ laptop, and I recently upgraded to Windows 8. The FN keys stopped working, so I tried to install default drivers using the CD that came with my laptop. Unfortunately, the CD does not support Windows 8. Asus Support does not help me either. It seems that Asus does not support Windows 8 on my model, since I can't find it in their list of Windows 8 upgradable models. Also, the support page of my laptop does not allow me to select Windows 8 as OS. That's why I'm asking my question here. I fixed (most of) the FN keys by installing the ATKPackage, and I was happy to find out that the media keys (play/pauze, next, previous) works with the Xbox Music app. But the keys only work in the Metro UI. In Desktop Mode, pressing FN+? (play/pause) starts up Windows Media Player. Disabling Windows Media Player through the control panel stops it from popping up, but Xbox Music still only responds to them in the Metro UI. I remember that I had similar problems when I tried to make these media keys to work with iTunes on Windows 7. The fix there was a small iTunes plug-in. So tell me, do you know how to fix my problem? Thanks.

  Read the article

• Sound from both speakers and headphones with SoundMAX ADI AD1986A on Windows 7: possible?

  - by oKtosiTe

  My ASUS A8N-VM CSM motherboard has an on-board sound chip–the SoundMAX ADI AD1986A. Although sound does work reliably on Windows 7, I was a bit disappointed that neither ASUS nor the manufacturer of the sound chip offer drivers for it for Windows 7 (or Vista for that matter). Among other things jack detection, output to front and read jack simultaneously and surround sound are no longer available using Microsoft's default HD Audio driver under Windows 7. Under Windows XP and several Linux distributions (Arch, Gentoo and Ubuntu) that I've tried everything works as it should. Since I switch between headphones and speakers quite often, this annoyance begs me to ask: aside from buying a sound card, is there any way to get sound from both outputs at the same time?

  Read the article

• Alternate motherboard in Dell case

  - by Kevin

  Is it possible to use an ASUS P6T motherboard in a Dell Dimension 9100 case?

  Read the article

• Avoiding double NAT with PPPoA connection

  - by user498429

  I've got an ASUS RT-N56U wending its way to me and have been thinking about how to set this up on my home network. I currently have a Netgear DG634g V5 and was hoping to use this device as a modem only, with everything else being done by the router. Problem is, my ISP uses PPPoA and the asus seems only to support PPPoE. I'm aware that a double NAT configuration should be avoided and I've seen some instructions here: http://www.tomshardware.co.uk/forum/33700-17-ultimate-modem-router-setup-thread Specifically, I was going to follow the guidance in the section entitled "Chaining Two Networks Together In a Cascading Fashion (Modem handles PPPoA)". That seems like it could work. However, is this a double NAT configuration or even a good way to do it? Would UPnP still work? The other option, I understand, is to buy the Draytek Vigor 120 but I'd ideally like to avoid the cost of that if its not necessary.

  Read the article

• If USB is not listed in BIOS as a boot option, does that mean the machine can't boot from USB?

  - by Chace Fields

  I just purchased an Asus Zenbook Prime UX31A-DH51 with Windows 8. I want to wipe the drive and do a clean install but USB is not listed as a boot option in the BIOS. Does this mean it is not possible? Here is a photo of my BIOS options. This is the only option I get when I click Add New Boot Option. Not sure if I can add USB here. * Update * Asus tech emailed and said: "Unfortunately with Windows 8 you can not boot from bios."

  Read the article

• Disassemble Asus A2500H

  - by Stijn Sanders

  I have an aged Asus A2500H notebook, with a broken screen and damage to the outside. Since it has a TV-out connection, and is working good otherwise, I have it hooked up to my television as a kind of media-center to play video over LAN. I want to remove the screen as cleanly as possible, but am having trouble opening up the laptop. I've been able to remove the (broken) hinges the screen pivots on. I've also removed any other screws I could spot, but still the casing doesn't come off and seems to be attached by yet more screws I can't access (yet). I've been searching the web for disassemble instructions, I've found some for a number of other brands and models, but not for the Asus A2500H.

  Read the article

• Dolby Digital Live (DDL) on Asus Rampage II Gene (Creative X-Fi Extreme)

  - by kevyn

  Hi there, I have an Asus Rampage II Gene motherboard which has X-Fi extreme built in. I can get it to work with Windows 7 ok using the Creative drivers, however when I try and install the DDL/DTS add on pack from Creative I get the error message: "There are no supported audio device available. You need to close the application. Click OK to close the application now" I don't understand it because I have the Creative software installed ok and supporting the sound without any problems. In Device manager the audio device comes up as 'High definition audio device' and uses driver: 6.1.7600.16385 from Microsoft. I tried using the Creative drivers which show up as 'soundmax HD audio' however these do not allow any of the Creative products to run properly. Please can anyone offer any help? Or even just confirm that DDL can work with my onboard sound? Windows 7 Ultimate 64 bit 6GB DDR3 XFX GS8800 384mb Asus Rampage II Gene Intel i7 920 (2.66)

  Read the article

< Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >