oracle modules - Page 187

Getting Started with Oracle Fusion Project Portfolio Management

Designed from the ground-up using the latest technology advances and incorporating the best practices gathered from Oracle's thousands of customers, Fusion Applications are 100 percent open standards-based business applications that set a new standard for the way we innovate, work and adopt technology. Delivered as a complete suite of modular applications, Fusion Applications work with your existing portfolio to evolve your business to a new level of performance. In this AppCast, part of a special series on Fusion Applications, you hear about the unique advantages of Fusion Project Portfolio Management, learn about the scope of the first release and discover how Fusion PPM modules can be used to complement and enhance your existing Projects solutions.

Read the article

R12.0 Cash Management Consolidated Patch Collection (CPC) And R12.1 Cash Management Recommended Patch Collection (RPC)

- by user793553

If you have Oracle E-Business Suite's Cash Management (CE) application installed, you'll want to be sure to install the latest CPC (Consolidated Patch Collection) if you are using a R12.0 version of the apps, or the latest RPC (Recommended Patch Collection) for the R12.1 version of the apps. These collections give you all the fixes currently available for known issues in the specified versions of the application, including all of the latest Root Cause Analysis Fixes (RCAs)! What is an "RPC" (for R12.1 users)? Since the release of 12.1, a number of recommended patches for Oracle Cash Management have been made available as standalone patches to help address important business process issues. Adoption of these patches was highly recommended at the time, but not always implemented, so to further facilitate adoption of these patches, Oracle consolidated them into product-specific Recommended Patch Collections (RPCs) - a collection of recommended patches. They were created by Oracle Development with the following goals in mind: Stability: To address data integrity issues that have been identified by Oracle Development and Oracle Software Support as having the potential to interfere with the normal completion of important business processes (such as, period close, etc.). Root Cause Fixes (RCAs): To make available root cause fixes for known data integrity issues. Compact: To keep the file footprint as small as possible to help facilitate the install process and minimize testing. Granular: To compile the collection of patches based on functional areas, allowing a customer to apply multiple RPCs at once, or in phases (based on individual needs and goals). Where to start ALL R12 Cash Management users (R12.0 and R12.1 users) should start with the following Note on My Oracle Support (MOS): Doc ID 1367845.1: R12: Cash Management Recommended Patch Collections It's a great place for important implementation information about both sets of critical patch collections! For R12.1x users R12.1 users should also take a look at the documents below for even more information about the RPC for the R12.1.x versions of the Cash Management application, and other related available RPCs: Note Number Title 1489997.1 Master Troubleshooting Guide for CE: Reconciliation & Clearing [VIDEO] 954704.1 EBS: R12.1 Oracle Financials Recommended Patch Collections (RPCs) 1316506.1 R12: Oracle CE: Upgrading from R11i to R12.1: Latest Recommended Patches Patch Wizard Utility While a patch may contain several hundred files, the impact on your system may actually be minimal. Patches contain hard prerequisites that are intended to make a patch work on a very low code baseline. The Patch Wizard Utility will give you a detailed analysis of the patch’s impact on your instance BEFORE it’s applied, so you’ll know exactly what to expect from the application. Please refer to Doc ID 976188.1 for more information on this important utility

Read the article

Wisdom of merging 100s of Oracle instances into one instance

- by hoytster

Our application runs on the web, is mostly an inquiry tool, does some transactions. We host the Oracle database. The app has always had a different instance of Oracle for each customer. A customer is a company which pays us to provide our service to the company's employees, typically 10,000-25,000 employees per customer. We do a major release every few years, and migrating to that new release is challenging: we might have a team at the customer site for a couple weeks, explaining new functionality and setting up the driving data to suit that customer. We're considering going multi-client, putting all our customers into a single shared Oracle 11g instance on a big honkin' Windows Server 2008 server -- in order to reduce costs. I'm wondering if that's advisable. There are some advantages to having separate instances for each customer. Tell me if these are bogus, please. In my rough guess about decreasing importance: Our customers MyCorp and YourCo can be migrated separately when breaking changes are made to the schema. (With multi-client, we'd be migrating 300+ customers overnight!?!) MyCorp's data can be easily backed up and (!!!) restored, without affecting other customers. MyCorp's data is securely separated from their competitor YourCo's data, without depending on developers to get the code right and/or DBAs getting the configuration right. Performance is better because the database is smaller (5,000 vs 2,000,000 rows in ~50 tables). If MyCorp's offices are (mostly) in just one region, then the MyCorp's instance can be geographically co-located there, so network lag doesn't hurt performance. We can provide better service to global clients, for the same reason. In MyCorp wants to take their database in-house, then we can easily export their instance, to get MyCorp their data. Load-balancing is easier because instances can be placed on different servers (this is with a web farm). When a DEV or QA instance is needed, it's easier to clone the real instance and anonymize the data, because there's much less data. Because they're small enough, developers can have their own instance running locally, so they can work on code while waiting at the airport and while in-flight, without fighting VPN hassles. Q1: What are other advantages of separate instances? We are contemplating changing the database schema and merging all of our customers into one Oracle instance, running on one hefty server. Here are advantages of the multi-client instance approach, most important first (my WAG). Please snipe if these are bogus: Less work for the DBAs, since they only need to maintain one instance instead of hundreds. Less DBA work translates to cheaper, our main motive for this change. With just one instance, the DBAs can do a better job of optimizing performance. They'll have time to add appropriate indexes and review our SQL. It will be easier for developers to debug & enhance the application, because there is only one schema and one app (there might be dozens of schema versions if there are hundreds of instances, with a different version of the app for each version of the schema). This reduces costs too. The alternative is having to start every debug session with (1) What version is this customer running and (2) Let's struggle to recreate the corresponding development environment, code and database. (We need a Virtual Machine that includes the code AND database instance for each patch and release!) Licensing Oracle is cheaper because it's priced per server irrespective of heft (or something -- I don't know anything about the subject). The database becomes a viable persistent store for web session data, because there is just one instance. Some database operations are easier with one multi-client instance, like finding a participant when they're hazy about which customer they (or their spouse, maybe) works for: all the names are in one table. Reporting across customers is straightforward. Q2: What are other advantages of having multiple clients in one instance? Q3: Which approach do you think is better (why)? Instance per customer, or all customers in one instance? I'm concerned that having one multi-client instance makes migration near-impossible, and that's a deal killer... ... unless there is a compromise solution like having two multi-client instances, the old and the new. In that case case, we would design cross-instance solutions for finding participants, reporting, etc. so customers could go from one multi-client instance to the next without anything breaking. THANKS SO MUCH for your collective advice! This issue is beyond me -- but not beyond the collective you. :) Hoytster

Read the article

starting oracle 10g on ubuntu, Listener failed to start.

- by tsegay

I have installed oracle 10g on a ubuntu 10.x, This is my first time installation. After installing I tried to start it with the command below. tsegay@server-name:/u01/app/oracle/product/10.2.0/db_1/bin$ lsnrctl LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 29-DEC-2010 22:46:51 Copyright (c) 1991, 2005, Oracle. All rights reserved. Welcome to LSNRCTL, type "help" for information. LSNRCTL> start Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait... TNSLSNR for Linux: Version 10.2.0.1.0 - Production System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1))) TNS-12555: TNS:permission denied TNS-12560: TNS:protocol adapter error TNS-00525: Insufficient privilege for operation Linux Error: 1: Operation not permitted Listener failed to start. See the error message(s) above... my listener.ora file looks like this: # listener.ora Network Configuration File: /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora # Generated by Oracle configuration tools. SID_LIST_LISTENER = (SID_LIST = (SID_DESC = (SID_NAME = PLSExtProc) (ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1) (PROGRAM = extproc) ) ) LISTENER = (DESCRIPTION_LIST = (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1)) (ADDRESS = (PROTOCOL = TCP)(HOST = acct-vmserver)(PORT = 1521)) ) ) I can guess the problem is with permission issue, But i dont know where I have to do the change on permission. Any help is appreciated ...

Read the article

Perl EPIC Not recognising installed CPAN modules

- by Recc

Eclipse on a mac, was working fine adding new modules until I Installed Text::CSV_XS which Eclips doesn't recognise as added to @INC For instance use strict; use SOAP::Transport::HTTP; SOAP::Transport::HTTP::CGI->dispatch_to('C2FService')->handle; BEGIN { package C2FService; use vars qw(@ISA); @ISA = qw(Exporter SOAP::Server::Parameters); use SOAP::Lite; sub c2f { my $self = shift; my $envelope = pop; my $temp = $envelope->dataof("//c2f/temperature"); return SOAP::Data->name( 'convertedTemp' => ( ( ( 9 / 5 ) * ( $temp->value ) ) + 32 ) ); } } use SOAP::Transport::HTTP; is marked as error if I comment it out use SOAP::Lite; is in turn marked as an error, not found etc the usual if a module is not installed. Both are installed with CPAN and $ perl -c soap-test.pl post-code-check.pl syntax OK Perl is fine CPAN tests are all pass, the code works, only EPIC lags behind. $ pwd && ls /opt/local/lib/perl5/site_perl/5.12.4/SOAP Client.pod Lite Server.pod Constants.pm Lite.pm Test.pm Data.pod Packager.pm Trace.pod Deserializer.pod SOM.pod Transport Fault.pod Schema.pod Transport.pod Header.pod Serializer.pod Utils.pod And if I have use errors in the start of my files the rest of the source is not error checked..

Read the article

Errors to do with modules when using net-snmp utils

- by bob

I was using the net-snmp packages that come with my linux distro (version 5.3.2.2), but wanted to do some work with the latest version of net-snmp (5.7), so tried compiling and installing the new source. It seemed to work ok but now I'm getting a load of errors when use net-snmp utils (snmpget, snmpset snmpwalk etc..) for example: $ snmptranslate -On SNMPv2-MIB::system.sysDescr MIB search path: /home/me/.snmp/mibs:/usr/local/share/snmp/mibs Cannot find module (SNMPv2-SMI) At line 6 in /usr/local/share/snmp/mibs/SNMPv2-MIB.txt Cannot find module (SNMPv2-TC): At line 9 in /usr/local/share/snmp/mibs/SNMPv2-MIB.txt Cannot find module (SNMPv2-MIB): At line 9 in (none) : <a lot of similar lines> : Cannot find module (NET-SNMP-VACM-MIB): At line 9 in (none) .1.3.6.1.2.1.1.1 From this I assumed perhaps that I was missing mibs from the 'MIB search path', so I looked at the first error 'Cannot find module (SNMPv2-SMI)', however it seems to be in the right directory: $ ls /usr/local/share/snmp/mibs/*SNMPv2-SMI* /usr/local/share/snmp/mibs/SNMPv2-SMI.txt And the same result for the other in the list.. so I'm wondering if anybody knows why it might not be finding the modules even though they seem to be in the search path?

Read the article

Memory modules not running at rated speeds.

- by Wesley

Hi all, I'm having some odd memory issues with my build. Here are my specs right now: QDI Superb 4 motherboard Intel Pentium 4 Northwood 2.4GHz (512KB L2, 533MHz FSB) 3x 256MB PC2100 DDR266 RAM 16MB NVIDIA TNT2 Pro AGP Seagate 80GB IDE HDD Generic USB 2.0 PCI Generic Modem PCI Bestec 250W PSU To be even more specific, here are the current brands and models of each module: Kingston KVR266X64C25/256 Samsung PC2100U-25331-Z SMART SM5643285D4N0CHM0H Supposedly, they are all PC2100 266MHz modules with a latency of 2.5. Looking in Speccy, the Kingston module is somehow running at a speed of PC2300 ~284MHz. I've never overclocked RAM at all as I don't know how to. However, when I first started the computer, I had the SMART module in place first and then reset the BIOS settings, including the integrated overclocking options. However, this still doesn't explain why the Kingston module runs at a higher speed than the SMART and Samsung module. Why is it like this? On a side note, where could I find the motherboard manual for the QDI Superb 4? Thanks in advance.

Read the article

Managing User & Role Security with Oracle SQL Developer

- by thatjeffsmith

With the advent of SQL Developer v3.0, users have had access to some powerful database administration features. Version 3.1 introduced more powerful features such as an interface to Data Pump and RMAN. Today I want to talk about some very simple but frequently ran tasks that SQL Developer can assist with, like: identifying privs granted to users managing role privs assigning new roles and privs to users & roles Before getting started, you’ll need a connection to the database with the proper privileges. The common ROLE used to accomplish this is the ‘DBA‘ role. Curious as to what the DBA role is actually comprised of? Let’s find out! Open the DBA Console First make sure you’re connected to the database you want to manage security on with a privileged administrator account. Then open the View menu and select ‘DBA.’ Accessing the DBA panel ‘Create’ a Connection Click on the green ‘+’ button in the DBA panel. It will ask you to choose a previously defined SQL Developer connection. Defining a DBA connection in Oracle SQL Developer Once connected you will see a tree list of DBA features you can start interacting with. Expand the ‘Security’ Tree Node As you click on an object in the DBA panel, the ‘viewer’ will open on the right-hand-side, just like you are accustomed to seeing when clicking on a table or stored procedure. Accessing the DBA role If I’m a newly hired Oracle DBA, the first thing I might want to do is become very familiar with the DBA role. People will be asking you to grant them this role or a subset of its privileges. Once you see what the role can do, you will become VERY protective of it. My favorite 3-letter 4-letter word is ‘ANY’ and the DBA role is littered with privileges like this: ANY TABLE privs granted to DBA role So if this doesn’t freak you out, then maybe you should re-consider your career path. Or in other words, don’t be granting this role to ANYONE you don’t completely trust to take care of your database. If I’m just assigned a new database to manage, the first thing I might want to look at is just WHO has been assigned the DBA role. SQL Developer makes this easy to ascertain, just click on the ‘User Grantees’ panel. Who has the keys to your car? Making Changes to Roles and Users If you mouse-right-click on a user in the Tree, you can do individual tasks like grant a sys priv or expire an account. But, you can also use the ‘Edit User’ dialog to do a lot of work in one pass. As you click through options in these dialogs, it will build the ‘ALTER USER’ script in the SQL panel, which can then be executed or copied to the worksheet or to your .SQL file to be ran at your discretion. A Few Clicks vs a Lot of Typing These dialogs won’t make you a DBA, but if you’re pressed for time and you’re already in SQL Developer, they can sure help you make up for lost time in just a few clicks!

Read the article

Jython and python modules

- by Geo

I've just started using the PythonInterpreter from within my Java classes, and it works great! However, if I try to include python modules (re, HTMLParser, etc.), I'm receiving the following exception (for re): Exception in thread "main" Traceback (innermost last): File "", line 1, in ? ImportError: no module named re How could I make the classes from the jython jar "see" the modules python has available?

Read the article

ASP.NET MVC hosting problem, routing, handlers and modules

- by johnabs

Hi, This is one of them again, hosting with fasthosts. I recently purchased a windows developer package from them. When I tried to deploy my ASP.NET 3.5 MVC project, which was working fine with the same host on a reseller account, it is not working. The reason to move from reseller to a normal Windows Developer package is, the MS-SQL server database is too expensive in a reseller account, strange! I contact them, and they are saying they upgraded the control panel. The technical support said, I need to disable the Modules and Handlers from the web.config file. Also I need to deploy them as .dll files. I am not sure how to do that. The website is partially working now. I think the problem is now with the routing. I have not deployed any .dlls apart from the System.Web.Mvc.dll, System.Web.Routing.dll and System.Web.Abstractions.dll. I have not got a clue on how to deploy the Modules and Handlers. The code that I commented on the web.config file is as follows.  Anybody got any ideas please. Thank you for your time.

Read the article

ruby nested classes and modules

- by ash34

Hi, I am familiar with the concept of nesting classes and modules within another module and grouping them in a namespace. What is the idea / purpose behind Nesting classes within another class class A class B def method_B ... end end end 2.Nesting modules within another class class A module c def method_c ... end end end thanks, ash

Read the article

Drupal 7 is unable to install modules

- by Benjamin Wong

My instance of Drupal 7 is unable to install new modules via FTP link. The error message that comes up is as follows : Warning: fileowner() [function.fileowner]: stat failed for temporary://upd92FE.tmp in update_manager_local_transfers_allowed() (line 924 of C:\inetpub\wwwroot\drupal\modules\update\update.manager.inc). My setup is as follows : Windows 7 Home Premium 64 Bit IIS 7.5 + Zend Community Server

Read the article

importing 2 modules with use

- by oren

I have 2 perl modules every module use the second one i.e Module1.pm use Module2 Module2.pm use Module1 did i enter infinte loop of loading modules or what happen on the background.

Read the article

CVS: Modules vs Subdirectories

- by Glaxalg

Does anyone know what is the best approach to define structure of modules/directories in CVS? Specifically what if I have big project that could possibly has many sub-projects (even not related). Is it better to define module for each sub-project or use subdirectories: Approach #1 Modules CVSROOT Main Project Platform A Sub-project1 Platform A Sub-project2 Platform B Sub-project3 ... Approach #2 subdirectories CVSROOT Project Main Platform A Sub-Project 1 Sub-Project 2 Platform B Sub-Project 3 ...

Read the article

Solaris 10 branded zone VM Templates for Solaris 11 on OTN

- by jsavit

Early this year I wrote the article Ours Goes To 11 which describes the ability to import Solaris 10 systems into a "Solaris 10 branded zone" under Oracle Solaris 11. I did this using Solaris 11 Express, and the capability remains in Solaris 11 with only slight changes. This important tool lets you painlessly inhaling a Solaris Container from Solaris 10 or entire Solaris 10 systems ("the global zone") into virtualized environments on a Solaris 11 OS. Just recently, Oracle provided Oracle VM Templates for Oracle Solaris 10 Zones to let you create Solaris 10 branded zones for Solaris 11 even if you don't currently have access to install media or a running Solaris 10 system. To use this, just download the Oracle VM Template for Oracle Solaris Zone 10 from OTN at http://www.oracle.com/technetwork/server-storage/solaris11/downloads/virtual-machines-1355605.html. This page contains images of Oracle Solaris 10 8/11 (the recent update to Solaris 10) in SPARC and x86 formats suitable for creating branded zones. The same page also has a VirtualBox image you can download for a complete Solaris 10 install in a guest virtual machine you can run on any host OS that supports VirtualBox. Both sets of downloads provide a quick - and extremely easy - way to set up a virtual Solaris 10 environment. In the case of the Oracle VM Templates, they illustrate several advanced features of Solaris 11. To start, just go to the above link, download the template for the hardware platform (SPARC or x86) you want, and download the README file also linked from that page. Install prerequisites The README file tells you to install the prerequisite Solaris 11 package that implements the Solaris 10 brand. Then you can install instances of zones with that brand. # pkg install pkg:/system/zones/brand/brand-solaris10 Packages to install: 1 Create boot environment: No Create backup boot environment: Yes DOWNLOAD PKGS FILES XFER (MB) Completed 1/1 44/44 0.4/0.4 PHASE ACTIONS Install Phase 74/74 PHASE ITEMS Package State Update Phase 1/1 Image State Update Phase 2/2 That took only a few minutes, and didn't require a reboot. Install the Solaris 10 zone Now it's time to run the downloaded template file. First make it executable via the chmod command, of course. I found that (unlike stated in the README) there was no need to rename the downloaded file to remove the .bin. When you run it you provide several parameters to describe the zone configuration: -a IP address - the IP address and optional netmask for the zone. This is the only mandatory parameter. -z zonename - the name of the zone you would like to create. -i interface - the package will create an exclusive-IP zone using a virtual NIC (vnic) based on this physical interface. In my case, I have a NIC called rge0. -p PATH - specifies the path in which you want the zoneroot to be placed. In my case, I have a ZFS dataset mounted at /zones, and this will create a zoneroot at /zones/s10u10. Kicking it off, you will see a copyright message, and then messages showing progress building the zone, which only takes a few minutes. # ./solaris-10u10-x86.bin -p /zones -a 192.168.1.100 -i rge0 -z s10u10 ... ... Checking disk-space for extraction Ok Extracting in /export/home/CDimages/s10zone/bootimage.ihaqvh ... 100% [===============================] Checking data integrity Ok Checking platform compatibility The host and the image do not have the same Solaris release: host Solaris release: 5.11 image Solaris release: 5.10 Will create a Solaris 10 branded zone. Warning: could not find a defaultrouter Zone won't have any defaultrouter configured IMAGE: ./solaris-10u10-x86.bin ZONE: s10u10 ZONEPATH: /zones/s10u10 INTERFACE: rge0 VNIC: vnicZBI13379 MAC ADDR: 2:8:20:5c:1a:cc IP ADDR: 192.168.1.100 NETMASK: 255.255.255.0 DEFROUTER: NONE TIMEZONE: US/Arizona Checking disk-space for installation Ok Installing in /zones/s10u10 ... 100% [===============================] Using a static exclusive-IP Attaching s10u10 Booting s10u10 Waiting for boot to complete booting... booting... booting... Zone s10u10 booted The zone's root password has been set using the root password of the local host. You can change the zone's root password to further harden the security of the zone: being root, log into the zone from the local host with the command 'zlogin s10u10'. Once logged in, change the root password with the command 'passwd'. The nifty part in my opinion (besides being so easy), is that the zone was created as an exclusive-IP zone on a virtual NIC. This network configuration lets you enforce traffic isolation from other zones, enforce network Quality of Service, and even let the zone set its own characteristics like IP address and packet size. Independence of the zone's network characteristics from the global zone is one of the enhancements in Solaris 10 that make it easier to consolidate zones while preserving their autonomy, yet provide control in a consolidated environment. Let's see what the virtual network environment looks like by issuing commands from the Solaris 11 global zone. First I'll use Old School ifconfig, and then I'll use the new ipadm and dladm commands. # ifconfig -a4 lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 rge0: flags=1004943<UP,BROADCAST,RUNNING,PROMISC,MULTICAST,DHCP,IPv4> mtu 1500 index 2 inet 192.168.1.3 netmask ffffff00 broadcast 192.168.1.255 ether 0:14:d1:18:ac:bc vboxnet0: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 3 inet 192.168.56.1 netmask ffffff00 broadcast 192.168.56.255 ether 8:0:27:f8:62:1c # dladm show-phys LINK MEDIA STATE SPEED DUPLEX DEVICE yge0 Ethernet unknown 0 unknown yge0 yge1 Ethernet unknown 0 unknown yge1 rge0 Ethernet up 1000 full rge0 vboxnet0 Ethernet up 1000 full vboxnet0 # dladm show-link LINK CLASS MTU STATE OVER yge0 phys 1500 unknown -- yge1 phys 1500 unknown -- rge0 phys 1500 up -- vboxnet0 phys 1500 up -- vnicZBI13379 vnic 1500 up rge0 s10u10/vnicZBI13379 vnic 1500 up rge0 s10u10/net0 vnic 1500 up rge0 # dladm show-vnic LINK OVER SPEED MACADDRESS MACADDRTYPE VID vnicZBI13379 rge0 1000 2:8:20:5c:1a:cc random 0 s10u10/vnicZBI13379 rge0 1000 2:8:20:5c:1a:cc random 0 s10u10/net0 rge0 1000 2:8:20:9d:d0:79 random 0 # ipadm show-addr ADDROBJ TYPE STATE ADDR lo0/v4 static ok 127.0.0.1/8 rge0/_a dhcp ok 192.168.1.3/24 vboxnet0/_a static ok 192.168.56.1/24 lo0/v6 static ok ::1/128 Log into the zone The install step already booted the zone, so lets log into it. Notice how you have to be appropriately privileged to log into a zone. This is my home system so I'm being a bit cavalier, but in a production environment you can give granular control of who can login to which zones. Voila! a Solaris 10 environment under a Solaris 11 kernel. Notice the output from the uname -a and ifconfig commands, and output from a ping to a nearby host. $ zlogin s10u10 zlogin: You lack sufficient privilege to run this command (all privs required) savit@home:~$ sudo zlogin s10u10 Password: [Connected to zone 's10u10' pts/5] Oracle Corporation SunOS 5.10 Generic Patch January 2005 # uname -a SunOS s10u10 5.10 Generic_Virtual i86pc i386 i86pc # ifconfig -a4 lo0: flags=2001000849 mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 vnicZBI13379: flags=1000843 mtu 1500 index 2 inet 192.168.1.100 netmask ffffff00 broadcast 192.168.1.255 ether 2:8:20:5c:1a:cc # bash bash-3.2# ifconfig -a lo0: flags=2001000849 mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 vnicZBI13379: flags=1000843 mtu 1500 index 2 inet 192.168.1.100 netmask ffffff00 broadcast 192.168.1.255 ether 2:8:20:5c:1a:cc bash-3.2# ping 192.168.1.2 192.168.1.2 is alive For fun, I configured Apache (setting its configuration file in /etc/apache2) and brought it up. Easy - took just a few minutes. bash-3.2# svcs apache2 STATE STIME FMRI disabled 12:38:46 svc:/network/http:apache2 bash-3.2# svcadm enable apache2 Summary In just a few minutes, I built a functioning virtual Solaris 10 environment under by Solaris 11 system. It was... easy! While I can still do it the manual way (creating and using a system archive), this is a low-effort way to create a Solaris 10 zone on Solaris 11.

Read the article

Clouds Everywhere But not a Drop of Rain – Part 3

- by sxkumar

I was sharing with you how a broad-based transformation such as cloud will increase agility and efficiency of an organization if process re-engineering is part of the plan. I have also stressed on the key enterprise requirements such as “broad and deep solutions, “running your mission critical applications” and “automated and integrated set of capabilities”. Let me walk you through some key cloud attributes such as “elasticity” and “self-service” and what they mean for an enterprise class cloud. I will also talk about how we at Oracle have taken a very enterprise centric view to developing cloud solutions and how our products have been specifically engineered to address enterprise cloud needs. Cloud Elasticity and Enterprise Applications Requirements Easy and quick scalability for a short-period of time is the signature of cloud based solutions. It is this elasticity that allows you to dynamically redistribute your resources according to business priorities, helps increase your overall resource utilization, and reduces operational costs by allowing you to get the most out of your existing investment. Most public clouds are offering a instant provisioning mechanism of compute power (CPU, RAM, Disk), customer pay for the instance-hours(and bandwidth) they use, adding computing resources at peak times and removing them when they are no longer needed. This type of “just-in-time” serving of compute resources is well known for mid-tiers “state less” servers such as web application servers and web servers that just need another machine to start and run on it but what does it really mean for an enterprise application and its underlying data? Most enterprise applications are not as quite as “state less” and justifiably so. As such, how do you take advantage of cloud elasticity and make it relevant for your enterprise apps? This is where Cloud meets Grid Computing. At Oracle, we have invested enormous amount of time, energy and resources in creating enterprise grid solutions. All our technology products offer built-in elasticity via clustering and dynamic scaling. With products like Real Application Clusters (RAC), Automatic Storage Management, WebLogic Clustering, and Coherence In-Memory Grid, we allow all your enterprise applications to benefit from Cloud elasticity –both vertically and horizontally - without requiring any application changes. A number of technology vendors take a rather simplistic route of starting up additional or removing unneeded VM as the "Cloud Scale-Out" solution. While this may work for stateless mid-tier servers where load balancers can handle the addition and remove of instances transparently but following a similar approach for the database tier - often called as "database sharding" - requires significant application modification and typically does not work with off the shelf packaged applications. Technologies like Oracle Database Real Application Clusters, Automatic Storage Management, etc. on the other hand bring the benefits of incremental scalability and on-demand elasticity to ANY application by providing a simplified abstraction layers where the application does not need deal with data spread over multiple database instances. Rather they just talk to a single database and the database software takes care of aggregating resources across multiple hardware components. It is the technologies like these that truly make a cloud solution relevant for enterprises. For customers who are looking for a next generation hardware consolidation platform, our engineered systems (e.g. Exadata, Exalogic) not only provide incredible amount of performance and capacity, they also reduce the data center complexity and simplify operations. Assemble, Deploy and Manage Enterprise Applications for Cloud Products like Oracle Virtual assembly builder (OVAB) resolve the complex problem of bringing the cloud speed to complex multi-tier applications. With assemblies, you can not only provision all components of a multi-tier application and wire them together by push of a button, other aspects of application lifecycle, such as real-time application testing, scale-up/scale-down, performance and availability monitoring, etc., are also automated using Oracle Enterprise Manager. An essential criteria for an enterprise cloud to succeed is the ability to ensure business service levels especially when business users have either full visibility on the usage cost with a “show back” or a “charge back”. With Oracle Enterprise Manager 12c, we have created the most comprehensive cloud management solution in the industry that is capable of managing business service levels “applications-to-disk” in a enterprise private cloud – all from a single console. It is the only cloud management platform in the industry that allows you to deliver infrastructure, platform and application cloud services out of the box. Moreover, it offers integrated and complete lifecycle management of the cloud - including planning and set up, service delivery, operations management, metering and chargeback, etc . Sounds unbelievable? Well, just watch this space for more details on how Oracle Enterprise Manager 12c is the nerve center of Oracle Cloud! Our cloud solution portfolio is also the broadest and most deep in the industry - covering public, private, hybrid, Infrastructure, platform and applications clouds. It is no coincidence therefore that the Oracle Cloud today offers the most comprehensive set of public cloud services in the industry. And to a large part, this has been made possible thanks to our years on investment in creating cloud enabling technologies. Summary But the intent of this blog post isn't to dwell on how great our solutions are (these are just some examples to illustrate how we at Oracle have approached this problem space). Rather it is to help you ask the right questions before you embark on your cloud journey. So to summarize, here are the key takeaways. It is critical that you are clear on why you are building the cloud. Successful organizations keep business benefits as the first and foremost cloud objective. On the other hand, those who approach this purely as a technology project are more likely to fail. Think about where you want to be in 3-5 years before you get started. Your long terms objectives should determine what your first step ought to be. As obvious as it may seem, more people than not make the first move without knowing where they are headed. Don’t make the mistake of equating cloud to virtualization and Infrastructure-as-a-Service (IaaS). Spinning a VM on-demand will give some short term relief to your IT staff but is unlikely to solve your larger business problems. As such, even if IaaS is your first step towards a more comprehensive cloud, plan the roadmap around those higher level services before you begin. And ask your vendors on how they are going to be your partners in this journey. Capabilities like self-service access and chargeback/showback are absolutely critical if you really expect your cloud to be transformational. Your business won't see the full benefits of the cloud until it empowers them with same kind of control and transparency that they are used to while using a public cloud service. Evaluate the benefits of integration, as opposed to blindly following the best-of-breed strategy. Integration is a huge challenge and more so in a cloud environment. There are enormous costs associated with stitching a solution out of disparate components and even more in maintaining it. Hope you found these ideas helpful. Looking forward to hearing your thoughts and experiences.

Read the article

Gentoo baselayout-2 problem with module parameters

- by Alakdae

I recently switched to baselayout-2 on my Gentoo machine but I have one problem. I autoload a module bttv with paramater: card=77,77 The problem is that at boot the module is loaded without the parameter which makes the video feed useless. I cannot find the cause because the funny thing is that when I put an echo in /etc/init.d/modules to see what is passed to modprobe, this is what I got: szymanowicz ~ # /etc/init.d/modules restart * WARNING: you are stopping a boot service * Caching service dependencies ... [ ok ] * Loading module bttv ... bttv card=77,77 [ ok ] * Autoloaded 1 module(s) It indicates that everything is OK, but dmesg shows that at boot time there are no parameters. bttv0: using: *** UNKNOWN/GENERIC *** [card=0,autodetected] ... bttv1: using: *** UNKNOWN/GENERIC *** [card=0,autodetected] Whereas when I run it manually I get: bttv0: using: GrandTec Multi Capture Card (Bt878) [card=77,insmod option] ... bttv1: using: GrandTec Multi Capture Card (Bt878) [card=77,insmod option] Please help me because reloading the modules every time there is a reboot is very anoying (not many reboots, but I need to remember about the module)

Read the article

Oracle & Active Directory : A love/hate relationship

- by Frank

Hi SO'ers, I'm currently trying to access Active Directory via the dbms_ldap API in Pl/Sql (Oracle). The trouble is that I'm not able to connect with my own username and password or anynoymously. However, in C# I can connect anonymously with this code : DirectoryEntry ldap = new DirectoryEntry("LDAP://Hostname"); DirectorySearcher searcher = new DirectorySearcher(ldap); searcher.Filter = "(SAMAccountName=username)"; SearchResult result = searcher.FindOne(); If I try to connect anonymously in Oracle, I only get the error(ORA-31202 : LDAP client/server error) when I try to search (and the result code for the bind is SUCCESS)... my_session := dbms_ldap.init('HOST','389'); retval := dbms_ldap.simple_bind_s(my_session, '', ''); retval := dbms_ldap.search_s(my_session, ldap_base, dbms_ldap.scope_subtree, 'objectclass=*', my_attrs, 0, my_message); Why is the anonymous connection is C# works but doesn't work in Pl/Sql? Do you have any other idea to connect to Active Directory via Oracle? Help me reunite them together. Thanks. Edit When I bind with anonymous credentials I get : ORA-31202: DBMS_LDAP: LDAP client/server error 00000000: LdapErr: DSID-0C090627, comment: In order to perform this operation a successful bind must be completed on the connection And if I try to connect with my credentials, which are supposed to be valid since I'm connected to the domain with it... I get : ORA-31202: DBMS_LDAP: LDAP client/server error Invalid credentials 80090308: LdapErr: DSID-0C090334, comment: AcceptSecurityContext error

Read the article

How to find if an Oracle APEX session is expired

- by Mathieu Longtin

I have created a single-sign-on system for our Oracle APEX applications, roughly based on this tutorial: http://www.oracle.com/technology/oramag/oracle/09-may/o39security.html The only difference is that my master SSO login is in Perl, rather than another APEX app. It sets an SSO cookie, and the app can check if it's valid with a database procedure. I have noticed that when I arrive in the morning, the whole system doesn't work. I reload a page from the APEX app, it then sends me to the SSO page because the session was expired, I logon, and get redirected back to my original APEX app page. This usually works except first thing in the morning. It seems the APEX session is expired. In that case it seems to find the session, but then refuse to use it, and sends me back to the login page. I've tried my best to trace the problem. The "wwv_flow_custom_auth_std.is_session_valid" function returns true, so I'm assuming the session is valid. But nothing works until I remove the APEX session cookie. Then I can log back in easily. Anybody knows if there is another call that would tell me if the session is expired or not? Thanks

Read the article

Getting Oracle's MD5 to match PHP's MD5

- by Zenshai

Hi all, I'm trying to compare an MD5 checksum generated by PHP to one generated by Oracle 10g. However it seems I'm comparing apples to oranges. Here's what I did to test the comparison: //md5 tests //php md5 print md5('testingthemd5function'); print '<br/><br/>'; //oracle md5 $md5query = "select md5hash('testingthemd5function') from dual"; $stid = oci_parse($conn, $md5query); if (!$stid) { $e = oci_error($conn); print htmlentities($e['message']); exit; } $r = oci_execute($stid, OCI_DEFAULT); if (!$r) { $e = oci_error($stid); echo htmlentities($e['message']); exit; } $row = oci_fetch_row($stid); print $row[0]; The md5 function (seen in the query above) in Oracle uses the 'dbms_obfuscation_toolkit.md5' package(?) and is defined like this: CREATE OR REPLACE FUNCTION PORTAL.md5hash (v_input_string in varchar2) return varchar2 is v_checksum varchar2(20); begin v_checksum := dbms_obfuscation_toolkit.md5 (input_string => v_input_string); return v_checksum; end; What comes out on my PHP page is: 29dbb90ea99a397b946518c84f45e016 )Û¹©š9{”eÈOEà Can anyone help me in getting the two to match?

Read the article

Dropping all user tables/sequences in Oracle

- by Ambience

As part of our build process and evolving database, I'm trying to create a script which will remove all of the tables and sequences for a user. I don't want to do recreate the user as this will require more permissions than allowed. My script creates a procedure to drop the tables/sequences, executes the procedure, and then drops the procedure. I'm executing the file from sqlplus: drop.sql: create or replace procedure drop_all_cdi_tables is cur integer; begin cur:= dbms_sql.OPEN_CURSOR(); for t in (select table_name from user_tables) loop execute immediate 'drop table ' ||t.table_name|| ' cascade constraints'; end loop; dbms_sql.close_cursor(cur); cur:= dbms_sql.OPEN_CURSOR(); for t in (select sequence_name from user_sequences) loop execute immediate 'drop sequence ' ||t.sequence_name; end loop; dbms_sql.close_cursor(cur); end; / execute drop_all_cdi_tables; / drop procedure drop_all_cdi_tables; / Unfortunately, dropping the procedure causes a problem. There seems to cause a race condition and the procedure is dropped before it executes. E.g.: SQL*Plus: Release 11.1.0.7.0 - Production on Tue Mar 30 18:45:42 2010 Copyright (c) 1982, 2008, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production With the Partitioning, OLAP, Data Mining and Real Application Testing options Procedure created. PL/SQL procedure successfully completed. Procedure created. Procedure dropped. drop procedure drop_all_user_tables * ERROR at line 1: ORA-04043: object DROP_ALL_USER_TABLES does not exist SQL Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64 With the Partitioning, OLAP, Data Mining and Real Application Testing options Any ideas on how to get this working?

Read the article

Connecting Error to Remote Oracle XE database using ASP.NET

- by imsatasia

Hello, I have installed Oracle XE on my Development machine and it is working fine. Then I installed Oracle XE client on my Test machine which is also working fine and I can access Development PC database from Browser. Now, I want to create an ASP.Net application which can access that Oracle XE database. I tried it too, but it always shows me an error on my TEST machine to connect database to the Development Machine using ASP.Net. Here is my code for ASP.Net application: protected void Page_Load(object sender, EventArgs e) { string connectionString = GetConnectionString(); OracleConnection connection = new OracleConnection(connectionString); connection.Open(); Label1.Text = "State: " + connection.State; Label1.Text = "ConnectionString: " + connection.ConnectionString; OracleCommand command = connection.CreateCommand(); string sql = "SELECT * FROM Users"; command.CommandText = sql; OracleDataReader reader = command.ExecuteReader(); while (reader.Read()) { string myField = (string)reader["nID"]; Console.WriteLine(myField); } } static private string GetConnectionString() { // To avoid storing the connection string in your code, // you can retrieve it from a configuration file. return "User Id=System;Password=admin;Data Source=(DESCRIPTION=" + "(ADDRESS=(PROTOCOL=TCP)(HOST=myServerAddress)(PORT=1521))" + "(CONNECT_DATA=(SERVICE_NAME=)));"; }

Read the article

Return an Oracle Associative Array from a function

- by Paul Johnson

Does anybody know if it is possible to return an associative array as the result of an Oracle function, if so do you have any examples? I have an Oracle package which contains an associative array declaration as defined below: TYPE EVENTPARAM IS TABLE OF NUMBER INDEX BY BINARY_INTEGER; This is then used in a stored procedure outside the package as follows: v_CompParams areva_interface.eventparam; The intention is to store an associative array of strings in the variable v_CompParams, returned from a Parse function in another package. The definition for which is as follows: PACKAGE STRING_MANIP IS TYPE a_array IS TABLE OF NUMBER INDEX BY BINARY_INTEGER; FUNCTION Parse (v_string VARCHAR2, v_delim VARCHAR2) RETURN a_array; FUNCTION RowCount(colln IN a_array) RETURN NUMBER; END; The code which implements this is: v_CompParams := STRING_MANIP.PARSE(v_CompID,v_Delim); Unfortunately it doesn't work, I get the error 'PLS-00382: expression is of wrong type'. I foolishly assumed, that since a_array derives from the same source Oracle type as the variable v_CompParams, that there would be no problem casting between them. Any help much appreciated. Kind Regards Paul J.

Read the article

ways to avoid global temp tables in oracle

- by Omnipresent

We just converted our sql server stored procedures to oracle procedures. Sql Server SP's were highly dependent on session tables (INSERT INTO #table1...) these tables got converted as global temporary tables in oracle. We ended up with aroun 500 GTT's for our 400 SP's Now we are finding out that working with GTT's in oracle is considered a last option because of performance and other issues. what other alternatives are there? Collections? Cursors? Our typical use of GTT's is like so: Insert into GTT INSERT INTO some_gtt_1 (column_a, column_b, column_c) (SELECT someA, someB, someC FROM TABLE_A WHERE condition_1 = 'YN756' AND type_cd = 'P' AND TO_NUMBER(TO_CHAR(m_date, 'MM')) = '12' AND (lname LIKE (v_LnameUpper || '%') OR lname LIKE (v_searchLnameLower || '%')) AND (e_flag = 'Y' OR it_flag = 'Y' OR fit_flag = 'Y')); Update the GTT UPDATE some_gtt_1 a SET column_a = (SELECT b.data_a FROM some_table_b b WHERE a.column_b = b.data_b AND a.column_c = 'C') WHERE column_a IS NULL OR column_a = ' '; and later on get the data out of the GTT. These are just sample queries, in actuality the queries are really complext with lot of joins and subqueries. I have a three part question: Can someone show how to transform the above sample queries to collections and/or cursors? Since with GTT's you can work natively with SQL...why go away from the GTTs? are they really that bad. What should be the guidelines on When to use and When to avoid GTT's

Read the article

Oracle ODBC x64 - getting 0 when selecting a number(9) column

- by MatsL

I'm having a really weird problem with a third party web service that uses an ODBC connection to Oracle 10.2.0.3.0. I've written a .NET client that generates the same SQL as the web service so I can find out what's going on. The web service is hosted by IIS 6 that's in x64 mode so we use Oracle x64 client. The oracle client version is 10.2.0.1.0. I have a table that looks like this (I've removed some columns and names): SQL> describe tablename; Name Null? Type ----------------------------------------- -------- ---------------------------- KOD VARCHAR2(30) ORDNING NUMBER(5) AVGIFT NUMBER(9) I then in SQL*Plus issue the following statement: SELECT KOD as kod, AVGIFT as riskPoang FROM tablename Where upper(KODTYP) = 'OBJLIVSV_RISKVERKSAMTYP' ORDER BY ORDNING And I get the following result: KOD RISKPOANG ------------------------------ ---------- Hög risk 55 Mellan risk 35 Låg risk 15 Mycket låg risk 5 But when I execute the exact same SQL using the same DSN on the same machine I get this: Values Kod: Hög risk RiskPoäng: 0 Kod: Mellan risk RiskPoäng: 0 Kod: Låg risk RiskPoäng: 0 Kod: Mycket låg risk RiskPoäng: 0 If I first cast the number to varchar and then back again to number, like this: SELECT KOD as kod, to_number(to_char(AVGIFT, '99'), '9999999999') as riskPoang FROM tablename Where upper(KODTYP) = 'OBJLIVSV_RISKVERKSAMTYP' ORDER BY ORDNING I get the correct result: Values Kod: Hög risk RiskPoäng: 55 Kod: Mellan risk RiskPoäng: 35 Kod: Låg risk RiskPoäng: 15 Kod: Mycket låg risk RiskPoäng: 5 Has anyone else experiences this? It's incredibly annoying and I'm completely stuck and not sure what to do next. We have a third party web service that use these tables so I must get the original SQL-statement to work since I can't modify its code. And pointers are greatly appreciated! :-) Best regards, Mats

Search Results

Search found 18108 results on 725 pages for 'oracle modules'.

Page 187/725 | < Previous Page | 183 184 185 186 187 188 189 190 191 192 193 194 | Next Page >

- by user793553

- by hoytster

- by tsegay

- by Recc

- by bob

- by Wesley

- by thatjeffsmith

- by Geo

- by johnabs

- by ash34

- by Benjamin Wong

- by oren

- by Glaxalg

- by jsavit

- by sxkumar

- by Alakdae

- by Frank

- by Mathieu Longtin

- by Zenshai

- by Ambience

- by imsatasia

- by Paul Johnson

- by Omnipresent

- by MatsL

< Previous Page | 183 184 185 186 187 188 189 190 191 192 193 194 | Next Page >