fedora 14 - Page 214 - Developer IT

DBCC CHECKDB (BatmanDb, REPAIR_ALLOW_DATA_LOSS) – Are you Feeling Lucky?

- by David Totzke

I’m currently working for a client on a PowerBuilder to WPF migration. It’s one of those “I could tell you, but I’d have to kill you” kind of clients and the quick-lime pits are currently occupied by the EMC tech…but I’ve said too much already. At approximately 3 or 4 pm that day users of the Batman[1] application here in Gotham[1] started to experience problems accessing the application. Batman[2] is a document management system here that also integrates with the ERP system. Very little goes on here that doesn’t involve Batman in some way. The errors being received seemed to point to network issues (TCP protocol error, connection forcibly closed by the remote host etc…) but the real issue was much more insidious. Connecting to the database via SSMS and performing selects on certain tables underlying the application areas that were having problems started to reveal the issue. You couldn’t do a SELECT * FROM MyTable without it bombing and giving the same error noted above. A run of DBCC CHECKDB revealed 14 tables with corruption. One of the tables with issues was the Document table. Pretty central to a “document management” system. Information was obtained from IT that a single drive in the SAN went bad in the night. A new drive was in place and was working fine. The partition that held the Batman database is configured for RAID Level 5 so a single drive failure shouldn’t have caused any trouble and yet, the database is corrupted. They do hourly incremental backups here so the first thing done was to try a restore. A restore of the most recent backup failed so they worked backwards until they hit a good point. This successful restore was for a backup at 3AM – a full day behind. This time also roughly corresponds with the time the SAN started to report the drive failure. The plot thickens… I got my hands on the output from DBCC CHECKDB and noticed a pattern. What’s sad is that nobody that should have noticed the pattern in the DBCC output did notice. There was a rush to do things to try and recover the data before anybody really understood what was wrong with it in the first place. Cooler heads must prevail in these circumstances and some investigation should be done and a plan of action laid out or you could end up making things worse[3]. DBCC CHECKDB also told us that: repair_allow_data_loss is the minimum repair level for the errors found by DBCC CHECKDB Yikes. That means that the database is so messed up that you’re definitely going to lose some stuff when you repair it to get it back to a consistent state. All the more reason to do a little more investigation into the problem. Rescuing this database is preferable to having to export all of the data possible from this database into a new one. This is a fifteen year old application with about seven hundred tables. There are TRIGGERS everywhere not to mention the referential integrity constraints to deal with. Only fourteen of the tables have an issue. We have a good backup that is missing the last 24 hours of business which means we could have a “do-over” of yesterday but that’s not a very palatable option either. All of the affected tables had TEXT columns and all of the errors were about LOB data types and orphaned off-row data which basically means TEXT, IMAGE or NTEXT columns. If we did a SELECT on an affected table and excluded those columns, we got all of the rows. We exported that data into a separate database. Things are looking up. Working on a copy of the production database we then ran DBCC CHECKDB with REPAIR_ALLOW_DATA_LOSS and that “fixed” everything up. The allow data loss option will delete the bad rows. This isn’t too horrible as we have all of those rows minus the text fields from out earlier export. Now I could LEFT JOIN to the exported data to find the missing rows and INSERT them minus the TEXT column data. We had the restored data from the good 3AM backup that we could now JOIN to and, with fingers crossed, recover the missing TEXT column information. We got lucky in that all of the affected rows were old and in the end we didn’t lose anything. :O All of the row counts along the way worked out and it looks like we dodged a major bullet here. We’ve heard back from EMC and it turns out the SAN firmware that they were running here is apparently buggy. This thing is only a couple of months old. Grrr…. They dispatched a technician that night to come and update it . That explains why RAID didn’t save us. All-in-all this could have been a lot worse. Given the root cause here, they basically won the lottery in not losing anything. Here are a few links to some helpful posts on the SQL Server Engine blog. I love the title of the first one: Which part of 'REPAIR_ALLOW_DATA_LOSS' isn't clear? CHECKDB (Part 8): Can repair fix everything? (in fact, read the whole series) Ta da! Emergency mode repair (we didn’t have to resort to this one thank goodness) Dave Just because I can… [1] Names have been changed to protect the guilty. [2] I'm Batman. [3] And if I'm the coolest head in the room, you've got even bigger problems...

Read the article

Basic shadow mapping fails on NVIDIA card?

- by James

Recently I switched from an AMD Radeon HD 6870 card to an (MSI) NVIDIA GTX 670 for performance reasons. I found however that my implementation of shadow mapping in all my applications failed. In a very simple shadow POC project the problem appears to be that the scene being drawn never results in a draw to the depth map and as a result the entire depth map is just infinity, 1.0 (Reading directly from the depth component after draw (glReadPixels) shows every pixel is infinity (1.0), replacing the depth comparison in the shader with a comparison of the depth from the shadow map with 1.0 shadows the entire scene, and writing random values to the depth map and then not calling glClear(GL_DEPTH_BUFFER_BIT) results in a random noisy pattern on the scene elements - from which we can infer that the uploading of the depth texture and comparison within the shader are functioning perfectly.) Since the problem appears almost certainly to be in the depth render, this is the code for that: const int s_res = 1024; GLuint shadowMap_tex; GLuint shadowMap_prog; GLint sm_attr_coord3d; GLint sm_uniform_mvp; GLuint fbo_handle; GLuint renderBuffer; bool isMappingShad = false; //The scene consists of a plane with box above it GLfloat scene[] = { -10.0, 0.0, -10.0, 0.5, 0.0, 10.0, 0.0, -10.0, 1.0, 0.0, 10.0, 0.0, 10.0, 1.0, 0.5, -10.0, 0.0, -10.0, 0.5, 0.0, -10.0, 0.0, 10.0, 0.5, 0.5, 10.0, 0.0, 10.0, 1.0, 0.5, ... }; //Initialize the stuff used by the shadow map generator int initShadowMap() { //Initialize the shadowMap shader program if (create_program("shadow.v.glsl", "shadow.f.glsl", shadowMap_prog) != 1) return -1; const char* attribute_name = "coord3d"; sm_attr_coord3d = glGetAttribLocation(shadowMap_prog, attribute_name); if (sm_attr_coord3d == -1) { fprintf(stderr, "Could not bind attribute %s\n", attribute_name); return 0; } const char* uniform_name = "mvp"; sm_uniform_mvp = glGetUniformLocation(shadowMap_prog, uniform_name); if (sm_uniform_mvp == -1) { fprintf(stderr, "Could not bind uniform %s\n", uniform_name); return 0; } //Create a framebuffer glGenFramebuffers(1, &fbo_handle); glBindFramebuffer(GL_FRAMEBUFFER, fbo_handle); //Create render buffer glGenRenderbuffers(1, &renderBuffer); glBindRenderbuffer(GL_RENDERBUFFER, renderBuffer); //Setup the shadow texture glGenTextures(1, &shadowMap_tex); glBindTexture(GL_TEXTURE_2D, shadowMap_tex); glTexImage2D(GL_TEXTURE_2D, 0, GL_DEPTH_COMPONENT, s_res, s_res, 0, GL_DEPTH_COMPONENT, GL_FLOAT, NULL); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE); return 0; } //Delete stuff void dnitShadowMap() { //Delete everything glDeleteFramebuffers(1, &fbo_handle); glDeleteRenderbuffers(1, &renderBuffer); glDeleteTextures(1, &shadowMap_tex); glDeleteProgram(shadowMap_prog); } int loadSMap() { //Bind MVP stuff glm::mat4 view = glm::lookAt(glm::vec3(10.0, 10.0, 5.0), glm::vec3(0.0, 0.0, 0.0), glm::vec3(0.0, 1.0, 0.0)); glm::mat4 projection = glm::ortho<float>(-10,10,-8,8,-10,40); glm::mat4 mvp = projection * view; glm::mat4 biasMatrix( 0.5, 0.0, 0.0, 0.0, 0.0, 0.5, 0.0, 0.0, 0.0, 0.0, 0.5, 0.0, 0.5, 0.5, 0.5, 1.0 ); glm::mat4 lsMVP = biasMatrix * mvp; //Upload light source matrix to the main shader programs glUniformMatrix4fv(uniform_ls_mvp, 1, GL_FALSE, glm::value_ptr(lsMVP)); glUseProgram(shadowMap_prog); glUniformMatrix4fv(sm_uniform_mvp, 1, GL_FALSE, glm::value_ptr(mvp)); //Draw to the framebuffer (with depth buffer only draw) glBindFramebuffer(GL_FRAMEBUFFER, fbo_handle); glBindRenderbuffer(GL_RENDERBUFFER, renderBuffer); glBindTexture(GL_TEXTURE_2D, shadowMap_tex); glFramebufferTexture2D(GL_FRAMEBUFFER, GL_DEPTH_ATTACHMENT, GL_TEXTURE_2D, shadowMap_tex, 0); glDrawBuffer(GL_NONE); glReadBuffer(GL_NONE); GLenum result = glCheckFramebufferStatus(GL_FRAMEBUFFER); if (GL_FRAMEBUFFER_COMPLETE != result) { printf("ERROR: Framebuffer is not complete.\n"); return -1; } //Draw shadow scene printf("Creating shadow buffers..\n"); int ticks = SDL_GetTicks(); glClear(GL_DEPTH_BUFFER_BIT); //Wipe the depth buffer glViewport(0, 0, s_res, s_res); isMappingShad = true; //DRAW glEnableVertexAttribArray(sm_attr_coord3d); glVertexAttribPointer(sm_attr_coord3d, 3, GL_FLOAT, GL_FALSE, 5*4, scene); glDrawArrays(GL_TRIANGLES, 0, 14*3); glDisableVertexAttribArray(sm_attr_coord3d); isMappingShad = false; glBindFramebuffer(GL_FRAMEBUFFER, 0); printf("Render Sbuf in %dms (GLerr: %d)\n", SDL_GetTicks() - ticks, glGetError()); return 0; } This is the full code for the POC shadow mapping project (C++) (Requires SDL 1.2, SDL-image 1.2, GLEW (1.5) and GLM development headers.) initShadowMap is called, followed by loadSMap, the scene is drawn from the camera POV and then dnitShadowMap is called. I followed this tutorial originally (Along with another more comprehensive tutorial which has disappeared as this guy re-configured his site but used to be here (404).) I've ensured that the scene is visible (as can be seen within the full project) to the light source (which uses an orthogonal projection matrix.) Shader utilities function fine in non-shadow-mapped projects. I should also note that at no point is the GL error state set. What am I doing wrong here and why did this not cause problems on my AMD card? (System: Ubuntu 12.04, Linux 3.2.0-49-generic, 64 bit, with the nvidia-experimental-310 driver package. All other games are functioning fine so it's most likely not a card/driver issue.)

Read the article

Performance: recursion vs. iteration in Javascript

- by mastazi

I have read recently some articles (e.g. http://dailyjs.com/2012/09/14/functional-programming/) about the functional aspects of Javascript and the relationship between Scheme and Javascript (the latter was influenced by the first, which is a functional language, while the O-O aspects are inherited from Self which is a prototyping-based language). However my question is more specific: I was wondering if there are metrics about the performance of recursion vs. iteration in Javascript. I know that in some languages (where by design iteration performs better) the difference is minimal because the interpreter / compiler converts recursion into iteration, however I guess that probably this is not the case of Javascript since it is, at least partially, a functional language.

Read the article

Logical progressions through the job market

- by Philluminati

I'm 5 years out of a unrecognised university where I did Software Engineering. First job was VB.NET, one job was Python, Linux and Web development. I feel cast as a web developer. I'd love a role doing C but no one is interested in juniors if the applicant hasn't got 3 years of C development experience already. I've done some C and a drop of open source coding but I'll never have the confidence to convince someone I know absolutely what I'm doing. Do I just spend more and more time letting life pass me by as I sit in my room on a friday night writing a C problem "for the sake of learning more C" Basically I'm just not sure I want to continue my career if it's going to involve nothing but high level, machine abstracted, business logic and as interested as I am in low level development and enjoy reading books by Taunembaum I struggle to see how I can make the jump and I just feel life would be easier if I got a job in a cafe in Amsterdam rolling spliffs for customers. My ideal job, being a paid member of the Fedora development team seems so far away, without anyone to pay me to learn the skills to get there, and the only way would be to literally spend weeks and weeks of my life contributing code without recognition for free and without any guarentees at the end. Not that I've contributed anything at all so far. Are there any career paths that are logically set out so that jumping between roles is "correctly" incremental and where hard work and learning does eventually lead to the kind of places I might want to go? [ and also getting paid at the same time? ]

Read the article

How do I solve VirtualBox error 0x80004005?

- by maria

Hi I was trying to run Windows XP under Virtual Box (host system Ubuntu 10.04) and I've got an error message saying: Kernel driver not installed (rc=-1908) The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. Re-setup the kernel module by executing '/etc/init.d/vboxdrv setup' as root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary. This is terminal output: maria@maria-laptop:~$ sudo /etc/init.d/vboxdrv setup * Stopping VirtualBox kernel modules * done. * Uninstalling old VirtualBox DKMS kernel modules * done. * Trying to register the VirtualBox kernel modules using DKMS * Failed, trying without DKMS * Recompiling VirtualBox kernel modules * done. * Starting VirtualBox kernel modules * done. After that I can run XP on Virtual Box, but when I try to log into user's account, I have the message that I have to register XP (I haven't done it yet, as each time I was cliking on pop-up window suggesting registration, nothing was happening). I click that I want to register it now and appears the message about error 0x80004005, which prevents Windows to check the license for that computer (the message is in Polish, so I don't post it here...). I forgot to install DKMS first, but I've done it after. What should I do to run virtual machine? It was using it already, the problem occured only today. Thanks for any suggestion

Read the article

7 reasons you had to be at JavaOne Latin America 2012

- by Bruno.Borges

Yesterday was 12/12/12, and everybody went crazy on Twitter with cool memes like this one. And maybe you are now wondering why I mentioned 7 (seven) on the blog title. Because I want to play numbers? Yes! Today is 7 days after JavaOne Latin America 2012 is over (... and I had to figure out an excuse for taking so long to blog about it...). So unless you were at JavaOne Latin America this year, here are 7 things you missed: OTN Lounge mini-theatreThere was a mini-theatre holding several lightning talks. We had people from SouJava JUG, GoJava JUG, Globalcode, and several other Java gurus and companies running demos, talks, and even more. For example, @drspockbr talked about the ScrumToys project, that demonstrates the power of JSF. Hands On Lab for JAX-RS and WebSocketsOne of the cool things to do during JavaOne is to come to these Hands On labs and really do something using new technologies with the help of experts. This one in particular, was covered by me, Arun Gupta, and Reza Rahman. The HOL had more people than laptops (and we had 48 laptops!) interested on understanding and learning about the new stuff that is coming within Java EE 7. Things like JAX-RS, Server-sent Events and WebSockets. Hey, if you want to try this HOL by yourself, it is available on Github, so go for it! If you have questions, just let me know! Java Community KeynoteThis keynote presented a lot of cool things like startups using Java in their projects, the Duke Awards, SouJava winning the JCP Outstanding Award, the Java Band, and even more! It was really a space where the Java community could present what they are doing and what they want to do. There's a lot of interest on the Adopt-a-JSR program and the Adopt-OpenJDK. There's also an Adopt-a-JavaEE-JSR program! Take a look if you want to participate and Make the Future Java. Java EE (JMS, JAX-RS) sessions from Reza Rahman, the HeavyMetal guyReza is a well know professional and Java EE enthusiast from the communitty who just joined Oracle this year. His sessions were very well attended, perhaps because of a high interest on the new things coming to Java EE 7 like JMS 2.0 and JAX-RS 2.0. If you want to look at what he did at this JavaOne edition, read his blog post. By the way, if you like Java and heavymetal, you should follow him on Twitter as well! :-) Java EE (WebSockets, HTML5) sessions from Arun Gupta, the GlassFish guyIf you don't know Arun Gupta, no worries. You will have time to know about him while you read his Java EE 6 Pocket Guide. Arun has been evangelizing Java EE for a long time, and is now spreading his word about the new upcoming version Java EE 7. He gave one talk about HTML5 Productivity on the Java EE 7 platform, and another one on building web apps with WebSockets. Pretty neat! Arun blogged about JavaOne Latin America as well. Read it here. Java Embedded and JavaFXIf there are two things that are really trending in the Java World right now besides Java EE 7, certainly they are JavaFX and Java Embedded. There were 14 talks covering Java Embedded, from Java Cards to Raspberry.pi, from Java ME to Java on your TV with Ginga-J. The Internet of Things is becoming true, and Java is the only platform today that can connect it all in an standardized and concise way. JavaFX gained a lot of attention too. There were 8 sessions covering what the platform has to offer in terms of Rich User Experience. The JavaFX Scene Builder is an awesome tool to start playing designing an UI, and coding for JavaFX is like coding Swing with 8 hands, one holding your coffee cup. You can achieve a lot, with your two hands (unless, you really have 8 hands, then you can achieve 4 times more :-). If you want to read more about JavaFX, go to Stephen Chin's blog post. GlassFish and Friends Party, 1st edition at JavaOne Lating AmericaThis is probably the thing that I'm most proud. We brought to Brasil the tradition of holding a happy hour for all GlassFish, Java EE friends. This party started almost 7 years ago in San Francisco, and it was about time to bring it to Brazil! The party happened on Tuesday night, right after JavaOne General Keynote, at the Tribeca Pub. We had about 80 attendees and met a lot of Java EE developers there! People from JUGs, Oracle, Locaweb and Red Hat showed up too, including some execs from Oracle that didn't resist and could not miss a party like this one.Lots of caipirinhas, beer and food to everyone, some cool music... even The Fish walking around the party with Juggy!You can see more photos from the party on an album I shared with the recently created GlassFish Brasil community on Google+ here (but you may be more interested in joining the GlassFish english community). There's also more pictures that Arun took and shared on this link. So now you may want to consider coming to Brazil next year! Java EE 7 is on its way, and Brazil is happily and patiently waiting for it, with a lot of enthusiasm. By the way, GlassFish and Java EE 6 just celebrated a Happy Birthday!

Read the article

ASP.NET Web Forms Extensibility: Handler Factories

- by Ricardo Peres

An handler factory is the class that implements IHttpHandlerFactory and is responsible for instantiating an handler (IHttpHandler) that will process the current request. This is true for all kinds of web requests, whether they are for ASPX pages, ASMX/SVC web services, ASHX/AXD handlers, or any other kind of file. Also used for restricting access for certain file types, such as Config, Csproj, etc. Handler factories are registered on the global Web.config file, normally located at %WINDIR%\Microsoft.NET\Framework<x64>\vXXXX\Config for a given path and request type (GET, POST, HEAD, etc). This goes on section <httpHandlers>. You would create a custom handler factory for a number of reasons, let me list just two: A centralized place for using dependency injection; Also a centralized place for invoking custom methods or performing some kind of validation on all pages. Let’s see an example using Unity for injecting dependencies into a page, suppose we have this on Global.asax.cs: 1: public class Global : HttpApplication 2: { 3: internal static readonly IUnityContainer Unity = new UnityContainer(); 4: 5: void Application_Start(Object sender, EventArgs e) 6: { 7: Unity.RegisterType<IFunctionality, ConcreteFunctionality>(); 8: } 9: } We instantiate Unity and register a concrete implementation for an interface, this could/should probably go in the Web.config file. Forget about its actual definition, it’s not important. Then, we create a custom handler factory: 1: public class UnityPageHandlerFactory : PageHandlerFactory 2: { 3: public override IHttpHandler GetHandler(HttpContext context, String requestType, String virtualPath, String path) 4: { 5: IHttpHandler handler = base.GetHandler(context, requestType, virtualPath, path); 6: 7: //one scenario: inject dependencies 8: Global.Unity.BuildUp(handler.GetType(), handler, String.Empty); 9: 10: return (handler); 11: } 12: } It inherits from PageHandlerFactory, which is .NET’s included factory for building regular ASPX pages. We override the GetHandler method and issue a call to the BuildUp method, which will inject required dependencies, if any exist. An example page with dependencies might be: 1: public class SomePage : Page 2: { 3: [Dependency] 4: public IFunctionality Functionality 5: { 6: get; 7: set; 8: } 9: } Notice the DependencyAttribute, it is used by Unity to identify properties that require dependency injection. When BuildUp is called, the Functionality property (or any other properties with the DependencyAttribute attribute) will receive the concrete implementation associated with it’s type, as registered on Unity. Another example, checking a page for authorization. Let’s define an interface first: 1: public interface IRestricted 2: { 3: Boolean Check(HttpContext ctx); 4: } An a page implementing that interface: 1: public class RestrictedPage : Page, IRestricted 2: { 3: public Boolean Check(HttpContext ctx) 4: { 5: //check the context and return a value 6: return ...; 7: } 8: } For this, we would use an handler factory such as this: 1: public class RestrictedPageHandlerFactory : PageHandlerFactory 2: { 3: private static readonly IHttpHandler forbidden = new UnauthorizedHandler(); 4: 5: public override IHttpHandler GetHandler(HttpContext context, String requestType, String virtualPath, String path) 6: { 7: IHttpHandler handler = base.GetHandler(context, requestType, virtualPath, path); 8: 9: if (handler is IRestricted) 10: { 11: if ((handler as IRestricted).Check(context) == false) 12: { 13: return (forbidden); 14: } 15: } 16: 17: return (handler); 18: } 19: } 20: 21: public class UnauthorizedHandler : IHttpHandler 22: { 23: #region IHttpHandler Members 24: 25: public Boolean IsReusable 26: { 27: get { return (true); } 28: } 29: 30: public void ProcessRequest(HttpContext context) 31: { 32: context.Response.StatusCode = (Int32) HttpStatusCode.Unauthorized; 33: context.Response.ContentType = "text/plain"; 34: context.Response.Write(context.Response.Status); 35: context.Response.Flush(); 36: context.Response.Close(); 37: context.ApplicationInstance.CompleteRequest(); 38: } 39: 40: #endregion 41: } The UnauthorizedHandler is an example of an IHttpHandler that merely returns an error code to the client, but does not cause redirection to the login page, it is included merely as an example. One thing we must keep in mind is, there can be only one handler factory registered for a given path/request type (verb) tuple. A typical registration would be: 1: <httpHandlers> 2: <remove path="*.aspx" verb="*"/> 3: <add path="*.aspx" verb="*" type="MyNamespace.MyHandlerFactory, MyAssembly"/> 4: </httpHandlers> First we remove the previous registration for ASPX files, and then we register our own. And that’s it. A very useful mechanism which I use lots of times.

Read the article

VirtualBox error 0x80004005

- by maria

Hi I was trying to run Windows XP under Virtual Box (host system Ubuntu 10.04) and I've got an error message saying: Kernel driver not installed (rc=-1908) The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. Re-setup the kernel module by executing '/etc/init.d/vboxdrv setup' as root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary. This is terminal output: maria@maria-laptop:~$ sudo /etc/init.d/vboxdrv setup * Stopping VirtualBox kernel modules * done. * Uninstalling old VirtualBox DKMS kernel modules * done. * Trying to register the VirtualBox kernel modules using DKMS * Failed, trying without DKMS * Recompiling VirtualBox kernel modules * done. * Starting VirtualBox kernel modules * done. After that I can run XP on Virtual Box, but when I try to log into user's account, I have the message that I have to register XP (I haven't done it yet, as each time I was cliking on pop-up window suggesting registration, nothing was happening). I click that I want to register it now and appears the message about error 0x80004005, which prevents Windows to check the license for that computer (the message is in Polish, so I don't post it here...). I forgot to install DKMS first, but I've done it after. What should I do to run virtual machine? It was using it already, the problem occured only today. Thanks for any suggestion

Read the article

SPARC T4-4 Delivers World Record First Result on PeopleSoft Combined Benchmark

- by Brian

Oracle's SPARC T4-4 servers running Oracle's PeopleSoft HCM 9.1 combined online and batch benchmark achieved World Record 18,000 concurrent users while executing a PeopleSoft Payroll batch job of 500,000 employees in 43.32 minutes and maintaining online users response time at < 2 seconds. This world record is the first to run online and batch workloads concurrently. This result was obtained with a SPARC T4-4 server running Oracle Database 11g Release 2, a SPARC T4-4 server running PeopleSoft HCM 9.1 application server and a SPARC T4-2 server running Oracle WebLogic Server in the web tier. The SPARC T4-4 server running the application tier used Oracle Solaris Zones which provide a flexible, scalable and manageable virtualization environment. The average CPU utilization on the SPARC T4-2 server in the web tier was 17%, on the SPARC T4-4 server in the application tier it was 59%, and on the SPARC T4-4 server in the database tier was 35% (online and batch) leaving significant headroom for additional processing across the three tiers. The SPARC T4-4 server used for the database tier hosted Oracle Database 11g Release 2 using Oracle Automatic Storage Management (ASM) for database files management with I/O performance equivalent to raw devices. This is the first three tier mixed workload (online and batch) PeopleSoft benchmark also processing PeopleSoft payroll batch workload. Performance Landscape PeopleSoft HR Self-Service and Payroll Benchmark Systems Users Ave Response Search (sec) Ave Response Save (sec) Batch Time (min) Streams SPARC T4-2 (web) SPARC T4-4 (app) SPARC T4-2 (db) 18,000 0.944 0.503 43.32 64 Configuration Summary Application Configuration: 1 x SPARC T4-4 server with 4 x SPARC T4 processors, 3.0 GHz 512 GB memory 5 x 300 GB SAS internal disks 1 x 100 GB and 2 x 300 GB internal SSDs 2 x 10 Gbe HBA Oracle Solaris 11 11/11 PeopleTools 8.52 PeopleSoft HCM 9.1 Oracle Tuxedo, Version 10.3.0.0, 64-bit, Patch Level 031 Java Platform, Standard Edition Development Kit 6 Update 32 Database Configuration: 1 x SPARC T4-4 server with 4 x SPARC T4 processors, 3.0 GHz 256 GB memory 3 x 300 GB SAS internal disks Oracle Solaris 11 11/11 Oracle Database 11g Release 2 Web Tier Configuration: 1 x SPARC T4-2 server with 2 x SPARC T4 processors, 2.85 GHz 256 GB memory 2 x 300 GB SAS internal disks 1 x 100 GB internal SSD Oracle Solaris 11 11/11 PeopleTools 8.52 Oracle WebLogic Server 10.3.4 Java Platform, Standard Edition Development Kit 6 Update 32 Storage Configuration: 1 x Sun Server X2-4 as a COMSTAR head for data 4 x Intel Xeon X7550, 2.0 GHz 128 GB memory 1 x Sun Storage F5100 Flash Array (80 flash modules) 1 x Sun Storage F5100 Flash Array (40 flash modules) 1 x Sun Fire X4275 as a COMSTAR head for redo logs 12 x 2 TB SAS disks with Niwot Raid controller Benchmark Description This benchmark combines PeopleSoft HCM 9.1 HR Self Service online and PeopleSoft Payroll batch workloads to run on a unified database deployed on Oracle Database 11g Release 2. The PeopleSoft HRSS benchmark kit is a Oracle standard benchmark kit run by all platform vendors to measure the performance. It's an OLTP benchmark where DB SQLs are moderately complex. The results are certified by Oracle and a white paper is published. PeopleSoft HR SS defines a business transaction as a series of HTML pages that guide a user through a particular scenario. Users are defined as corporate Employees, Managers and HR administrators. The benchmark consist of 14 scenarios which emulate users performing typical HCM transactions such as viewing paycheck, promoting and hiring employees, updating employee profile and other typical HCM application transactions. All these transactions are well-defined in the PeopleSoft HR Self-Service 9.1 benchmark kit. This benchmark metric is the weighted average response search/save time for all the transactions. The PeopleSoft 9.1 Payroll (North America) benchmark demonstrates system performance for a range of processing volumes in a specific configuration. This workload represents large batch runs typical of a ERP environment during a mass update. The benchmark measures five application business process run times for a database representing large organization. They are Paysheet Creation, Payroll Calculation, Payroll Confirmation, Print Advice forms, and Create Direct Deposit File. The benchmark metric is the cumulative elapsed time taken to complete the Paysheet Creation, Payroll Calculation and Payroll Confirmation business application processes. The benchmark metrics are taken for each respective benchmark while running simultaneously on the same database back-end. Specifically, the payroll batch processes are started when the online workload reaches steady state (the maximum number of online users) and overlap with online transactions for the duration of the steady state. Key Points and Best Practices Two Oracle PeopleSoft Domain sets with 200 application servers each on a SPARC T4-4 server were hosted in 2 separate Oracle Solaris Zones to demonstrate consolidation of multiple application servers, ease of administration and performance tuning. Each Oracle Solaris Zone was bound to a separate processor set, each containing 15 cores (total 120 threads). The default set (1 core from first and third processor socket, total 16 threads) was used for network and disk interrupt handling. This was done to improve performance by reducing memory access latency by using the physical memory closest to the processors and offload I/O interrupt handling to default set threads, freeing up cpu resources for Application Servers threads and balancing application workload across 240 threads. See Also Oracle PeopleSoft Benchmark White Papers oracle.com SPARC T4-2 Server oracle.com OTN SPARC T4-4 Server oracle.com OTN PeopleSoft Enterprise Human Capital Management oracle.com OTN PeopleSoft Enterprise Human Capital Management (Payroll) oracle.com OTN Oracle Solaris oracle.com OTN Oracle Database 11g Release 2 Enterprise Edition oracle.com OTN Disclosure Statement Oracle's PeopleSoft HR and Payroll combined benchmark, www.oracle.com/us/solutions/benchmark/apps-benchmark/peoplesoft-167486.html, results 09/30/2012.

Read the article

Installed on a machine with EFI and after installation, it says the disk is not bootable

- by Roy Hocknull

I installed Ubuntu 11.10 and the installation runs through fine. It then says reboot, and the machine says 'inserts a boot disk' which means the hard disk isn't bootable. The primary hard disk is an EFI device, and nothing seems to work. The machine in question is an Acer Aspire M3970 desktop. Core i5 2300, with 8Gb Ram. Main boot drive is an SSD (Vertex 2E 60Gb). I am trying to install the 11.10 x64 version. The installation I have tried from CD and USB stick. It goes through the install, allows you to partition the drives then installs all the packages. At the end it goes for a reboot, and asks you to remove the installation media. The PC then restarts and says no bootable disk. I tried it many times. In the end I have installed Fedora 15 x64 which works straight away with no messing. Unless this issues is fixed I have to drop 11.10 as a viable option. From my experience F15 isn't quite as polished as Ubuntu, but in this case - it works!! Is this a widespread problem or am I unique?

Read the article

Using a Predicate as a key to a Dictionary

- by Tom Hines

I really love Linq and Lambda Expressions in C#. I also love certain community forums and programming websites like DaniWeb. A user on DaniWeb posted a question about comparing the results of a game that is like poker (5-card stud), but is played with dice. The question stemmed around determining what was the winning hand. I looked at the question and issued some comments and suggestions toward a potential answer, but I thought it was a neat homework exercise. [A little explanation] I eventually realized not only could I compare the results of the hands (by name) with a certain construct – I could also compare the values of the individual dice with the same construct. That piece of code eventually became a Dictionary with the KEY as a Predicate<int> and the Value a Func<T> that returns a string from the another structure that contains the mapping of an ENUM to a string. In one instance, that string is the name of the hand and in another instance, it is a string (CSV) representation of of the digits in the hand. An added benefit is that the digits re returned in the order they would be for a proper poker hand. For instance the hand 1,2,5,3,1 would be returned as ONE_PAIR (1,1,5,3,2). [Getting to the point] 1: using System; 2: using System.Collections.Generic; 3: 4: namespace DicePoker 5: { 6: using KVP_E2S = KeyValuePair<CDicePoker.E_DICE_POKER_HAND_VAL, string>; 7: public partial class CDicePoker 8: { 9: /// <summary> 10: /// Magical construction to determine the winner of given hand Key/Value. 11: /// </summary> 12: private static Dictionary<Predicate<int>, Func<List<KVP_E2S>, string>> 13: map_prd2fn = new Dictionary<Predicate<int>, Func<List<KVP_E2S>, string>> 14: { 15: {new Predicate<int>(i => i.Equals(0)), PlayerTie},//first tie 16: 17: {new Predicate<int>(i => i > 0), 18: (m => string.Format("Player One wins\n1={0}({1})\n2={2}({3})", 19: m[0].Key, m[0].Value, m[1].Key, m[1].Value))}, 20: 21: {new Predicate<int>(i => i < 0), 22: (m => string.Format("Player Two wins\n2={2}({3})\n1={0}({1})", 23: m[0].Key, m[0].Value, m[1].Key, m[1].Value))}, 24: 25: {new Predicate<int>(i => i.Equals(0)), 26: (m => string.Format("Tie({0}) \n1={1}\n2={2}", 27: m[0].Key, m[0].Value, m[1].Value))} 28: }; 29: } 30: } When this is called, the code calls the Invoke method of the predicate to return a bool. The first on matching true will have its value invoked. 1: private static Func<DICE_HAND, E_DICE_POKER_HAND_VAL> GetHandEval = dh => 2: map_dph2fn[map_dph2fn.Keys.Where(enm2fn => enm2fn(dh)).First()]; After coming up with this process, I realized (with a little modification) it could be called to evaluate the individual values in the dice hand in the event of a tie. 1: private static Func<List<KVP_E2S>, string> PlayerTie = lst_kvp => 2: map_prd2fn.Skip(1) 3: .Where(x => x.Key.Invoke(RenderDigits(dhPlayerOne).CompareTo(RenderDigits(dhPlayerTwo)))) 4: .Select(s => s.Value) 5: .First().Invoke(lst_kvp); After that, I realized I could now create a program completely without “if” statements or “for” loops! 1: static void Main(string[] args) 2: { 3: Dictionary<Predicate<int>, Action<Action<string>>> main = new Dictionary<Predicate<int>, Action<Action<string>>> 4: { 5: {(i => i.Equals(0)), PlayGame}, 6: {(i => true), Usage} 7: }; 8: 9: main[main.Keys.Where(m => m.Invoke(args.Length)).First()].Invoke(Display); 10: } …and there you have it. :) ZIPPED Project

Read the article

kubuntu 12.10 will not boot on mac 2.93Ghz intel core 2 duo

- by Jake Sweet

I feel like I've tried it all and nothing is changing. I've tried booting from a liveUSB, a liveDVD, and I've checked the mod5 everything matches up. I've even tried different distro's same result on all of them. Just for reference: linuxmint 13kde and Fedora 17. I've also tried changing my liveUSB building software just in case. I've tried unetbootin and Linux USB builder. Both have same results, my opinion is that it is a hardware issue since I'm having near the same result with all of these variables. So now what is actually happening? I can boot up to a screen. I say A screen because some of the ways that dvd's and usb's boot differs. Now on liveusb I'm reaching a black screen with white text. Says booting: done, then below says loading ramdrive: done, then below that it says preparing to boot kernel this may take a while and buckle in or something to that effect. Then nothing. That's it computer freezes. I've waited up to 8 hrs and still nothing. Ok for the liveDVD Everything goes according to instructions per pdf files on every distro, until linux starts. I can only run in compatibility mode. When any other option is tried the computer seems to freeze/stall/be a pain in my butt... Ok well that seems to wrap it up. Also if I'm not explaining something well, I'm sorry I can try to clear anything up. I'm not the best at descriptions. I'm leaving with a tech specs of my mac: 2.93GHz Intel Core 2 Duo, 4 GB ram, NVIDIA GeForce GT 120 graphics, bought in late 09" it's the 24" model, let me know if anymore information will help. Also thanks in advance

Read the article

ISACA Webcast follow up: Managing High Risk Access and Compliance with a Platform Approach to Privileged Account Management

- by Darin Pendergraft

Last week we presented how Oracle Privileged Account Manager (OPAM) could be used to manage high risk, privileged accounts. If you missed the webcast, here is a link to the replay: ISACA replay archive (NOTE: you will need to use Internet Explorer to view the archive) For those of you that did join us on the call, you will know that I only had a little bit of time for Q&A, and was only able to answer a few of the questions that came in. So I wanted to devote this blog to answering the outstanding questions. Here they are. 1. Can OPAM track admin or DBA activity details during a password check-out session? Oracle Audit Vault is monitoring these activities which can be correlated to check-out events. 2. How would OPAM handle simultaneous requests? OPAM can be configured to allow for shared passwords. By default sharing is turned off. 3. How long are the passwords valid? Are the admins required to manually check them in? Password expiration can be configured and set in the password policy according to your corporate standards. You can specify if you want forced check-in or not. 4. Can 2-factor authentication be used with OPAM? Yes - 2-factor integration with OPAM is provided by integration with Oracle Access Manager, and Oracle Adaptive Access Manager. 5. How do you control access to OPAM to ensure that OPAM admins don't override the functionality to access privileged accounts? OPAM provides separation of duties by using Admin Roles to manage access to targets and privileged accounts and to control which operations admins can perform. 6. How and where are the passwords stored in OPAM? OPAM uses Oracle Platform Security Services (OPSS) Credential Store Framework (CSF) to securely store passwords. This is the same system used by Oracle Applications. 7. Does OPAM support hierarchical/level based privileges? Is the log maintained for independent review/audit? Yes. OPAM uses the Fusion Middleware (FMW) Audit Framework to store all OPAM related events in a dedicated audit database. 8. Does OPAM support emergency access in the case where approvers are not available until later? Yes. OPAM can be configured to release a password under a "break-glass" emergency scenario. 9. Does OPAM work with AIX? Yes supported UNIX version are listed in the "certified component section" of the UNIX connector guide at:http://docs.oracle.com/cd/E22999_01/doc.111/e17694/intro.htm#autoId0 10. Does OPAM integrate with Sun Identity Manager? Yes. OPAM can be integrated with SIM using the REST APIs. OPAM has direct integration with Oracle Identity Manager 11gR2. 11. Is OPAM available today and what does it cost? Yes. OPAM is available now. Ask your Oracle Account Manager for pricing. 12. Can OPAM be used in SAP environments? Yes, supported SAP version are listed in the "certified component section" of the SAP connector guide here: http://docs.oracle.com/cd/E22999_01/doc.111/e25327/intro.htm#autoId0 13. How would this product integrate, if at all, with access to a particular field in the DB that need additional security such as SSN's? OPAM can work with DB Vault and DB Firewall to provide the fine grained access control for databases. 14. Is VM supported? As a deployment platform Oracle VM is supported. For further details about supported Virtualization Technologies see Oracle Fusion Middleware Supported System configurations here: http://www.oracle.com/technetwork/middleware/ias/downloads/fusion-certification-100350.html 15. Where did this (OPAM) technology come from? OPAM was built by Oracle Engineering. 16. Are all Linux flavors supported? How about BSD? BSD is not supported. For supported UNIX version see the "certified component section" of the UNIX connector guide http://docs.oracle.com/cd/E22999_01/doc.111/e17694/intro.htm#autoId0 17. What happens if users don't check passwords in at the end of a work task? In OPAM a time frame can be defined how long a password can be checked out. The security admin can force a check-in at any given time. 18. is MySQL supported? Yes, supported DB version are listed in the "certified component section" of the DB connector guide here: http://docs.oracle.com/cd/E22999_01/doc.111/e28315/intro.htm#BABGJJHA 19. What happens when OPAM crashes and you need to use the password? OPAM can be configured for high availability, but if required, OPAM data can be backed up/recovered. See the OPAM admin guide. 20. Is OPAM Standalone product or does it leverage other components from IDM? OPAM can be run stand-alone, but will also leverage other IDM components

Read the article

Whoosh: PASS Board Year 1, Q4

- by Denise McInerney

"Whoosh". That's the sound the last quarter of 2012 made as it rushed by. My first year on the PASS Board is complete, and the last three months of it were probably the busiest. PASS Summit 2012 Much of October was devoted to preparing for Summit. Every Board member, HQ staffer and dozens of volunteers were busy in the run-up to our flagship event. It takes a lot of work to put on the Summit. The community meetings, first-timers program, keynotes, sessions and that fabulous Community Appreciation party are the result of many hours of preparation. Virtual Chapters at the Summit With a lot of help from Karla Landrum, Michelle Nalliah, Lana Montgomery and others at HQ the VCs had a good presence at Summit. We started the week with a VC leaders meeting. I shared some information about the activities and growth during the first part of the year. From January - September 2012: The number of VCs increased from 14 to 20 VC membership grew from 55,200 to 80,100 Total attendance at VC meetings increased from 1,480 to 2,198 Been part of PASS Global Growth with language-based VC- including Chinese, Spanish and Portuguese. We also heard from some VC leaders and volunteers. Ryan Adams (Performance VC) shared his tips for successful marketing of VC events. Amy Lewis (Business Intelligence VC) described how the BI chapter has expanded to support PASS' global growth by finding volunteers to organize events at times that are convenient for people in Europe and Australia. Felipe Ferreira (Portuguese language VC) described the experience of building a user group first in Brazil, then expanding to work with Portuguese-speaking data professionals around the world. Virtual Chapter leaders and volunteers were in evidence throughout Summit, beginning with the Welcome Reception. For the past several years VCs have had an organized presence at this event, signing up new members and advertising their meetings. Many VC leaders also spent time at the Community Zone. This new addition to the Summit proved to be a vibrant spot were new members and volunteers could network with others and find out how to start a chapter or host a SQL Saturday. Women In Technology 2012 was the 10th WIT Luncheon to be held at Summit. I was honored to be asked to be on the panel to discuss the topic "Where Have We Been and Where are We Going?" The PASS community has come a long way in our understanding of issues facing women in tech and our support of women in the organization. It was great to hear from panelists Stefanie Higgins and Kevin Kline who were there at the beginning as well as Kendra Little and Jen Stirrup who are part of the progress being made by women in our community today. Bylaw Changes The Board spent a good deal of time in 2012 discussing how to move our global growth initiatives forward. An important component of this is a proposed change to how the Board is elected with some seats representing geographic regions. At the end of December we voted on these proposed bylaw changes which have been published for review. The member review and feedback is open until February 8. I encourage all members to review these changes and send any feedback to [email protected] In addition to reading the bylaws, I recommend reading Bill Graziano's blog post on the subject. Business Analytics Conference At Summit we announced a new event: the PASS Business Analytics Conference. The inaugural event will be April 10-12, 2013 in Chicago. The world of data is changing rapidly. More and more businesses want to extract value and insight from their data. Data professionals who provide these insights or enable others to do so are in demand. The BA Conference offers expert content on predictive analytics, data exploration and visualization, content delivery strategies and more. By holding this new event PASS is participating in important discussions happening in our industry, offering our members more educational value and reaching out to data professionals who are not currently part of our organization. New Year, New Portfolio In addition to my work with the Virtual Chapters I am also now responsible for the 24 Hours of PASS portfolio. Since the first 24HOP of 2013 is scheduled for January 30 we started the transition of the portfolio work from Rob Farley to me right after Summit. Work immediately started to secure speakers for the January event. We have also been evaluating webinar platforms that can be used for 24HOP as well as the Virtual Chapters. Next Up 24 Hours of PASS: Business Analytics Edition will be held on January 30. I'll be there and will moderate one or two sessions. The 24HOP topics are a sneak peek into the type of content that will be offered at the Business Analytics Conference. I hope to see some of you there. The Virtual Chapters have hit the ground running in 2013; many of them have events scheduled. The Application Development VC is getting restarted and a new Business Analytics VC will be starting soon. Check out the lineup and join the VCs that interest you. And watch the Events page and Connector for announcements of upcoming meetings. At the end of January I will be attending a Board meeting in Seattle, and February 23 I will be at SQL Saturday #177 in Silicon Valley.

Read the article

Blog Buzz - Devoxx 2011

- by Janice J. Heiss

Some day I will make it to Devoxx – for now, I’m content to vicariously follow the blogs of attendees and pick up on what’s happening. I’ve been doing more blog "fishing," looking for the best commentary on 2011 Devoxx. There’s plenty of food for thought – and the ideas are not half-baked.The bloggers are out in full, offering useful summaries and commentary on Devoxx goings-on.Constantin Partac, a Java developer and a member of Transylvania JUG, a community from Cluj-Napoca/Romania, offers an excellent summary of the Devoxx keynotes. Here’s a sample:“Oracle Opening Keynote and JDK 7, 8, and 9 Presentation• Oracle is committed to Java and wants to provide support for it on any device.• JSE 7 for Mac will be released next week.• Oracle would like Java developers to be involved in JCP, to adopt a JSR and to attend local JUG meetings.• JEE 7 will be released next year.• JEE 7 is focused on cloud integration, some of the features are already implemented in glassfish 4 development branch.• JSE 8 will be release in summer of 2013 due to “enterprise community request” as they can not keep the pace with an 18 month release cycle.• The main features included in JSE8 are lambda support, project Jigsaw, new Date/Time API, project Coin++ and adding support for sensors. JSE 9 probably will focus on some of these features:1. self tuning JVM2. improved native language integration3. processing enhancement for big data4. reification (adding runtime class type info for generic types)5. unification of primitive and corresponding object classes6. meta-object protocol in order to use type and methods define in other JVM languages7. multi-tenancy8. JVM resource management” Thanks Constantin! Ivan St. Ivanov, of SAP Labs Bulgaria, also commented on the keynotes with a different focus. He summarizes Henrik Stahl’s look ahead to Java SE 8 and JavaFX 3.0; Cameron Purdy on Java EE and the cloud; celebrated Java Champion Josh Bloch on what’s good and bad about Java; Mark Reinhold’s quick look ahead to Java SE 9; and Brian Goetz on lambdas and default methods in Java SE 8. Here’s St. Ivanov’s account of Josh Bloch’s comments on the pluses of Java:“He started with the virtues of the platform. To name a few: Tightly specified language primitives and evaluation order – int is always 32 bits and operations are executed always from left to right, without compilers messing around Dynamic linking – when you change a class, you need to recompile and rebuild just the jar that has it and not the whole application Syntax similarity with C/C++ – most existing developers at that time felt like at home Object orientations – it was cool at that time as well as functional programming is today It was statically typed language – helps in faster runtime, better IDE support, etc. No operator overloading – well, I’m not sure why it is good. Scala has it for example and that’s why it is far better for defining DSLs. But I will not argue with Josh.”It’s worth checking out St. Ivanov’s summary of Bloch’s views on what’s not so great about Java as well. What's Coming in JAX-RS 2.0Marek Potociar, Principal Software Engineer at Oracle and currently specification lead of Java EE RESTful web services API (JAX-RS), blogged on his talk about what's coming in JAX-RS 2.0, scheduled for final release in mid-2012. Here’s a taste:“Perhaps the most wanted addition to the JAX-RS is the Client API, that would complete the JAX-RS story, that is currently server-side only. In JAX-RS 2.0 we are adding a completely interface-based and fluent client API that blends nicely in with the existing fluent response builder pattern on the server-side. When we started with the client API, the first proposal contained around 30 classes. Thanks to the feedback from our Expert Group we managed to reduce the number of API classes to 14 (2 of them being exceptions)! The resulting is compact while at the same time we still managed to create an API that reflects the method invocation context flow (e.g. once you decide on the target URI and start setting headers on the request, your IDE will not try to offer you a URI setter in the code completion). This is a subtle but very important usability aspect of an API…” Obviously, Devoxx is a great Java conference, one that is hitting this year at a time when much is brewing in the platform and beginning to be anticipated.

Read the article

MCM Lab exam this week

- by Rob Farley

In two days I’ll’ve finished the MCM Lab exam, 88-971. If you do an internet search for 88-971, it’ll tell you the answer is –883. Obviously. It’ll also give you a link to the actual exam page, which is useful too, once you’ve finished being distracted by the calculator instead of going to the thing you’re actually looking for. (Do people actually search the internet for the results of mathematical questions? Really?) The list of Skills Measured for this exam is quite short, but can essentially be broken down into one word “Anything”. The Preparation Materials section is even better. Classroom Training – none available. Microsoft E-Learning – none available. Microsoft Press Books – none available. Practice Tests – none available. But there are links to Readiness Videos and a page which has no resources listed, but tells you a list of people who have already qualified. Three in Australia who have MCM SQL Server 2008 so far. The list doesn’t include some of the latest batch, such as Jason Strate or Tom LaRock. I’ve used SQL Server for almost 15 years. During that time I’ve been awarded SQL Server MVP seven times, but the MVP award doesn’t actually mean all that much when considering this particular certification. I know lots of MVPs who have tried this particular exam and failed – including Jason and Tom. Right now, I have no idea whether I’ll pass or not. People tell me I’ll pass no problem, but I honestly have no idea. There’s something about that “Anything” aspect that worries me. I keep looking at the list of things in the Readiness Videos, and think to myself “I’m comfortable with Resource Governor (or whatever) – that should be fine.” Except that then I feel like I maybe don’t know all the different things that can go wrong with Resource Governor (or whatever), and I wonder what kind of situations I’ll be faced with. And then I find myself looking through the stuff that’s explained in the videos, and wondering what kinds of things I should know that I don’t, and then I get amazingly bored and frustrated (after all, I tell people that these exams aren’t supposed to be studied for – you’ve been studying for the last 15 years, right?), and I figure “What’s the worst that can happen? A fail?” I’m told that the exam provides a list of scenarios (maybe 14 of them?) and you have 5.5 hours to complete them. When I say “complete”, I mean complete – you don’t get to leave them unfinished, that’ll get you ‘nil points’ for that scenario. Apparently no-one gets to complete all of them. Now, I’m a consultant. I get called on to fix the problems that people have on their SQL boxes. Sometimes this involves fixing corruption. Sometimes it’s figuring out some performance problem. Sometimes it’s as straight forward as getting past a full transaction log; sometimes it’s as tricky as recovering a database that has lost its metadata, without backups. Most situations aren’t a problem, but I also have the confidence of being able to do internet searches to verify my maths (in case I forget it’s –883). In the exam, I’ll have maybe twenty minutes per scenario (but if I need longer, I’ll have to take longer – no point in stopping half way if it takes more than twenty minutes, unless I don’t see an end coming up), so I’ll have time constraints too. And of course, I won’t have any of my usual tools. I can’t take scripts in, I can’t take staff members. Hopefully I can use the coffee machine that will be in the room. I figure it’s going to feel like one of those days when I’ve gone into a client site, and found that the problems are way worse than I expected, and that the site is down, with people standing over me needing me to get things right first time... ...so it should be fine, I’ve done that before. :) If I do fail, it won’t make me any less of a consultant. It won’t make me any less able to help all of my clients (including you if you get in touch – hehe), it’ll just mean that the particular problem might’ve taken me more than the twenty minutes that the exam gave me. @rob_farley PS: Apparently the done thing is to NOT advertise that you’re sitting the exam at a particular time, only that you’re expecting to take it at some point in the future. I think it’s akin to the idea of not telling people you’re pregnant for the first few months – it’s just in case the worst happens. Personally, I’m happy to tell you all that I’m going to take this exam the day after tomorrow (which is the 19th in the US, the 20th here). If I end up failing, you can all commiserate and tell me that I’m not actually as unqualified as I feel.

Read the article

How to make the tokenizer detect empty spaces while using strtok()

- by Shadi Al Mahallawy

I am designing a c++ program, somewhere in the program i need to detect if there is a blank(empty token) next to the token used know eg. if(token1==start) { token2=strtok(NULL," "); if(token2==NULL) {LCCTR=0;} else {LCCTR=atoi(token2);} so in the previous peice token1 is pointing to start , and i want to check if there is anumber next to the start , so I used token2=strtok(NULL," ") to point to the next token but unfortunattly the strtok function cannot detect empty spaces so it gives me an error at run time"INVALID NULL POINTER" how can i fix it or is there another function to use to detect empty spaces #include <iostream> #include<string> #include<map> #include<iomanip> #include<fstream> #include<ctype.h> using namespace std; const int MAX=300; int LCCTR; int START(char* token1); char* PASS1(char*token1); void tokinizer() { ifstream in; ofstream out; char oneline[MAX]; in.open("infile.txt"); out.open("outfile.txt"); if(in.is_open()) { char *token1; in.getline(oneline,MAX); token1 = strtok(oneline," \t"); START (token1); //cout<<'\t'; while(token1!=NULL) { //PASS1(token1); //cout<<token1<<" "; token1=strtok(NULL," \t"); if(NULL==token1) {//cout<<endl; //cout<<LCCTR<<'\t'; in.getline(oneline,MAX); token1 = strtok(oneline," \t"); } } } in.close(); out.close(); } int START(char* token1) { string start("START"); char*token2; if(token1 != start) {LCCTR=0;} else if(token1==start) { token2=strchr(token1+2,' '); cout<<token2; if(token2==NULL) {LCCTR=0;} else {LCCTR=atoi(token2); if(atoi(token2)>9999||atoi(token2)<0){cout<<"IVALID STARTING ADDRESS"<<endl;exit(1);} } } return LCCTR; } char* PASS1 (char*token1) { map<string,int> operations; map<string,int>symtable; map<string,int>::iterator it; pair<map<string,int>::iterator,bool> ret; char*token3=NULL; char*token2=NULL; string test; string comp(" "); string start("START"); string word("WORD"); string byte("BYTE"); string resb("RESB"); string resw("RESW"); string end("END"); operations["ADD"] = 18; operations["AND"] = 40; operations["COMP"] = 28; operations["DIV"] = 24; operations["J"] = 0X3c; operations["JEQ"] =30; operations["JGT"] =34; operations["JLT"] =38; operations["JSUB"] =48; operations["LDA"] =00; operations["LDCH"] =50; operations["LDL"] =55; operations["LDX"] =04; operations["MUL"] =20; operations["OR"] =44; operations["RD"] =0xd8; operations["RSUB"] =0x4c; operations["STA"] =0x0c; operations["STCH"] =54; operations["STL"] =14; operations["STSW"] =0xe8; operations["STX"] =10; operations["SUB"] =0x1c; operations["TD"] =0xe0; operations["TIX"] =0x2c; operations["WD"] =0xdc; if(operations.find("ADD")->first==token1) { token2=strtok(NULL," "); //test=token2; cout<<token2; //if(test.empty()){cout<<"MISSING OPERAND"<<endl;exit(1);} //else{LCCTR=LCCTR+3;} } /*else if(operations.find("AND")->first==token1) { token2=strtok(NULL," "); test=token2; if(test.empty()){cout<<"MISSING OPERAND"<<endl;exit(1);} else{LCCTR=LCCTR+3;} } else if(operations.find("COMP")->first==token1) { token2=token1+5; test=token2; if(test.empty()){cout<<"MISSING OPERAND"<<endl;exit(1);} else{LCCTR=LCCTR+3;} } else if(operations.find("DIV")->first==token1) { token2=token1+4; test=token2; if(test.empty()){cout<<"MISSING OPERAND"<<endl;exit(1);} else{LCCTR=LCCTR+3;} } else if(operations.find("J")->first==token1) { token2=token1+2; test=token2; if(test.empty()){cout<<"MISSING OPERAND"<<endl;exit(1);} else{LCCTR=LCCTR+3;} } else if(operations.find("JEQ")->first==token1) { token2=token1+5; test=token2; if(test.empty()){cout<<"MISSING OPERAND"<<endl;exit(1);} else{LCCTR=LCCTR+3;} } else if(operations.find("JGT")->first==token1) { token2=strtok(NULL," "); test=token2; if(test.empty()){cout<<"MISSING OPERAND"<<endl;exit(1);} else{LCCTR=LCCTR+3;} } else if(operations.find("JLT")->first==token1) { token2=token1+6; test=token2; if(test.empty()){cout<<"MISSING OPERAND"<<endl;exit(1);} else{LCCTR=LCCTR+3;} } else if(operations.find("JSUB")->first==token1) { token2=token1+6; test=token2; if(test.empty()){cout<<"MISSING OPERAND"<<endl;exit(1);} else{LCCTR=LCCTR+3;} } else if(operations.find("LDA")->first==token1) { token2=token1+6; test=token2; if(test.empty()){cout<<"MISSING OPERAND"<<endl;exit(1);} else{LCCTR=LCCTR+3;} } else if(operations.find("LDCH")->first==token1) { token2=token1+6; test=token2; if(test.empty()){cout<<"MISSING OPERAND"<<endl;exit(1);} else{LCCTR=LCCTR+3;} } else if(operations.find("LDL")->first==token1) { token2=token1+6; test=token2; if(test.empty()){cout<<"MISSING OPERAND"<<endl;exit(1);} else{LCCTR=LCCTR+3;} } else if(operations.find("LDX")->first==token1) { token2=token1+6; test=token2; if(test.empty()){cout<<"MISSING OPERAND"<<endl;exit(1);} else{LCCTR=LCCTR+3;} } else if(operations.find("MUL")->first==token1) { token2=token1+6; test=token2; if(test.empty()){cout<<"MISSING OPERAND"<<endl;exit(1);} else{LCCTR=LCCTR+3;} } else if(operations.find("OR")->first==token1) { token2=token1+6; test=token2; if(test.empty()){cout<<"MISSING OPERAND"<<endl;exit(1);} else{LCCTR=LCCTR+3;} } else if(operations.find("RD")->first==token1) { token2=token1+6; test=token2; if(test.empty()){cout<<"MISSING OPERAND"<<endl;exit(1);} else{LCCTR=LCCTR+3;} } else if(operations.find("RSUB")->first==token1) { token2=token1+6; test=token2; if(test.empty()){cout<<"MISSING OPERAND"<<endl;exit(1);} else{LCCTR=LCCTR+3;} } else if(operations.find("STA")->first==token1) { token2=token1+6; test=token2; if(test.empty()){cout<<"MISSING OPERAND"<<endl;exit(1);} else{LCCTR=LCCTR+3;} } else if(operations.find("STCH")->first==token1) { token2=token1+6; test=token2; if(test.empty()){cout<<"MISSING OPERAND"<<endl;exit(1);} else{LCCTR=LCCTR+3;} } else if(operations.find("STL")->first==token1) { token2=token1+6; test=token2; if(test.empty()){cout<<"MISSING OPERAND"<<endl;exit(1);} else{LCCTR=LCCTR+3;} } else if(operations.find("STSW")->first==token1) { token2=token1+6; test=token2; if(test.empty()){cout<<"MISSING OPERAND"<<endl;exit(1);} else{LCCTR=LCCTR+3;} } else if(operations.find("STX")->first==token1) { token2=token1+6; test=token2; if(test.empty()){cout<<"MISSING OPERAND"<<endl;exit(1);} else{LCCTR=LCCTR+3;} } else if(operations.find("SUB")->first==token1) { token2=token1+6; test=token2; if(test.empty()){cout<<"MISSING OPERAND"<<endl;exit(1);} else{LCCTR=LCCTR+3;} } else if(operations.find("TD")->first==token1) { token2=token1+6; test=token2; if(test.empty()){cout<<"MISSING OPERAND"<<endl;exit(1);} else{LCCTR=LCCTR+3;} } else if(operations.find("TIX")->first==token1) { token2=token1+6; test=token2; if(test.empty()){cout<<"MISSING OPERAND"<<endl;exit(1);} else{LCCTR=LCCTR+3;} } else if(operations.find("WD")->first==token1) { token2=token1+6; test=token2; if(test.empty()){cout<<"MISSING OPERAND"<<endl;exit(1);} else{LCCTR=LCCTR+3;} }*/ //else if( if(word==token1) {LCCTR=LCCTR+3;} else if(byte==token1) {string test; token2=token1+7; test=token2; if(test[0]=='C') {token3=token1+10; test=token3; if(test.length()>15) {cout<<"ERROR"<<endl; exit(1);} } else if(test[0]=='X') {token3=token1+10; test=token3; if(test.length()>14) {cout<<"ERROR"<<endl; exit(1);} } LCCTR=LCCTR+test.length(); } else if(resb==token1) {token3=token1+5; LCCTR=LCCTR+atoi(token3);} else if(resw==token1) {token3=token1+5; LCCTR=LCCTR+3*atoi(token3);} else if(end==token1) {exit(1);} /*else { test=token1; int last=test.length(); if(token1==start||test[0]=='C'||test[0]=='X'||ispunct(test[last])||isdigit(test[0])||isdigit(test[1])||isdigit(test[2])||isdigit(test[3])){} else { token2=strtok(NULL," "); //test=token2; cout<<token2; if(token2!=NULL) { symtable.insert( pair<string,int>(token1,LCCTR)); for(it=symtable.begin() ;it!=symtable.end() ;++it) {/*cout<<"symbol: "<<it->first<<" LCCTR: "<<it->second<<endl;} } else{} } }*/ return token3; } int main() { tokinizer(); return 0; }

Read the article

How to attach turrets to tiles in a tile based game

- by Joseph St. Pierre

I am a flash developer, and I am building a Tower Defense game. The world is being built through tiles, and I have gotten that accomplished easily. I have also gotten level changes and enemy spawning down as well. However, I wish the player to be able to spawn turrets, and have those turrets be on specific tiles, based upon where the player placed it. Here is my code: stop(); colOffset = 50; rowOffset = 50; guns = []; placed = true; dead = 0; spawned = 0; level = 1; interval = 350 / level; amount = level * 20; counter = 0; numCol = 14; numRow = 10; tiles = []; k = 0; create = false; tileName = new Array("road","grass","end", "start"); board = new Array( new Array(1,1,1,1,3,1,1,1,1,1,2,1,1,1), new Array(1,1,1,0,0,1,1,1,1,1,0,1,1,1), new Array(1,1,1,0,1,1,1,1,1,1,0,0,1,1), new Array(1,1,1,0,0,0,1,1,1,1,1,0,1,1), new Array(1,1,1,0,1,0,0,0,1,1,1,0,0,1), new Array(1,1,1,0,1,1,1,0,0,1,1,1,0,1), new Array(1,1,0,0,1,1,1,1,0,1,1,0,0,1), new Array(1,1,0,1,1,1,1,1,0,1,0,0,1,1), new Array(1,1,0,0,0,0,0,0,0,1,0,1,1,1), new Array(1,1,1,1,1,1,1,1,0,0,0,1,1,1) ); buildBoard(); function buildBoard(){ for ( col = 0; col < numCol; col++){ for ( row = 0; row < numRow; row++){ _root.attachMovie("tile", "tile_" + col + "_" + row, _root.getNextHighestDepth()); theTile = eval("tile_" + col + "_" + row); theTile._x = (col * 50); theTile._y = (row * 50); theTile.row = row; theTile.col = col; tileType = board[row][col]; theTile.gotoAndStop(tileName[tileType]); tiles.push(theTile); } } } init(); function init(){ onEnterFrame = function(){ counter += 1; if ( spawned < amount && counter > 50){ min= _root.attachMovie("minion","minion",_root.getNextHighestDepth()); min._x = tile_4_0._x + 25; min._y = tile_4_0._y + 25; min.health = 100; choose = Math.round(Math.random()); if ( choose == 0 ){ min.waypointX = [ tile_4_1._x +25, tile_3_1._x + 25, tile_3_2._x + 25, tile_3_6._x + 25, tile_2_6._x + 25, tile_2_8._x + 25, tile_8_8._x + 25, tile_8_9._x + 25, tile_10_9._x + 25, tile_10_7._x + 25, tile_11_7._x + 25, tile_11_6._x + 25, tile_12_6._x + 25, tile_12_4._x + 25, tile_11_4._x + 25, tile_11_2._x + 25, tile_10_2._x + 25, tile_10_0._x + 25]; min.waypointY = [ tile_4_1._y +25, tile_3_1._y + 25, tile_3_2._y + 25, tile_3_6._y + 25, tile_2_6._y + 25, tile_2_8._y + 25, tile_8_8._y + 25, tile_8_9._y + 25, tile_10_9._y + 25, tile_10_7._y + 25, tile_11_7._y + 25, tile_11_6._y + 25, tile_12_6._y + 25, tile_12_4._y + 25, tile_11_4._y + 25, tile_11_2._y + 25, tile_10_2._y + 25, tile_10_0._y + 25]; } else if ( choose == 1 ){ min.waypointX = [ tile_4_1._x +25, tile_3_1._x + 25, tile_3_2._x + 25, tile_3_3._x + 25, tile_5_3._x + 25, tile_5_4._x + 25, tile_7_4._x + 25, tile_7_5._x + 25, tile_8_5._x + 25, tile_8_8._x + 25, tile_8_9._x + 25, tile_10_9._x + 25, tile_10_7._x + 25, tile_11_7._x + 25, tile_11_6._x + 25, tile_12_6._x + 25, tile_12_4._x + 25, tile_11_4._x + 25, tile_11_2._x + 25, tile_10_2._x + 25, tile_10_0._x + 25 ]; min.waypointY = [ tile_4_1._y +25, tile_3_1._y + 25, tile_3_2._y + 25, tile_3_3._y + 25, tile_5_3._y + 25, tile_5_4._y + 25, tile_7_4._y + 25, tile_7_5._y + 25, tile_8_5._y + 25, tile_8_8._y + 25, tile_8_9._y + 25, tile_10_9._y + 25, tile_10_7._y + 25, tile_11_7._y + 25, tile_11_6._y + 25, tile_12_6._y + 25, tile_12_4._y + 25, tile_11_4._y + 25, tile_11_2._y + 25, tile_10_2._y + 25, tile_10_0._y + 25 ]; } min.i = 0; counter = 0; spawned += 1; min.onEnterFrame = function(){ dx = this.waypointX[this.i] - this._x; dy = this.waypointY[this.i] - this._y; radians = Math.atan2(dy,dx); degrees = radians * 180 / Math.PI; xspeed = Math.cos(radians); yspeed = Math.sin(radians); this._x += xspeed; this._y += yspeed; if( this._x == this.waypointX[this.i] && this._y == this.waypointY[this.i]){ this.i++; } if ( this._x == tile_10_0._x + 25 && this._y == tile_10_0._y + 25){ this.removeMovieClip(); dead += 1; } } } if ( dead >= amount ){ dead = 0; level += 1; amount = level * 20; spawned = 0; } } btnM.onRelease = function(){ create = true; } } game.onEnterFrame = function(){ } It is possible for me however to complete this task, but only once. I am able to make the turret, drag it over to a tile, and have it attach itself to the tile. No problem. The issue is, I cannot do these multiple times. Please Help.

Read the article

Professional Development – Difference Between Bio, CV and Resume

- by Pinal Dave

Applying for work can be very stressful – you want to put your best foot forward, and it can be very hard to sell yourself to a potential employer while highlighting your best characteristics and answering questions. On top of that, some jobs require different application materials – a biography (or bio), a curriculum vitae (or CV), or a resume. These things seem so interchangeable, so what is the difference? Let’s start with the one most of us have heard of – the resume. A resume is a summary of your job and education history. If you have ever applied for a job, you will have used a resume. The ability to write a good resume that highlights your best characteristics and emphasizes your qualifications for a specific job is a skill that will take you a long way in the world. For such an essential skill, unfortunately it is one that many people struggle with. RESUME So let’s discuss what makes a great resume. First, make sure that your name and contact information are at the top, in large print (slightly larger font than the rest of the text, size 14 or 16 if the rest is size 12, for example). You need to make sure that if you catch the recruiter’s attention and they know how to get a hold of you. As for qualifications, be quick and to the point. Make your job title and the company the headline, and include your skills, accomplishments, and qualifications as bullet points. Use good action verbs, like “finished,” “arranged,” “solved,” and “completed.” Include hard numbers – don’t just say you “changed the filing system,” say that you “revolutionized the storage of over 250 files in less than five days.” Doesn’t that sentence sound much more powerful? Curriculum Vitae (CV) Now let’s talk about curriculum vitae, or “CVs”. A CV is more like an expanded resume. The same rules are still true: put your name front and center, keep your contact info up to date, and summarize your skills with bullet points. However, CVs are often required in more technical fields – like science, engineering, and computer science. This means that you need to really highlight your education and technical skills. Difference between Resume and CV Resumes are expected to be one or two pages long – CVs can be as many pages as necessary. If you are one of those people lucky enough to feel limited by the size constraint of resumes, a CV is for you! On a CV you can expand on your projects, highlight really exciting accomplishments, and include more educational experience – including GPA and test scores from the GRE or MCAT (as applicable). You can also include awards, associations, teaching and research experience, and certifications. A CV is a place to really expand on all your experience and how great you will be in this particular position. Biography (Bio) Chances are, you already know what a bio is, and you have even read a few of them. Think about the one or two paragraphs that every author includes in the back flap of a book. Think about the sentences under a blogger’s photo on every “About Me” page. That is a bio. It is a way to quickly highlight your life experiences. It is essentially the way you would introduce yourself at a party. Where a bio is required for a job, chances are they won’t want to know about where you were born and how many pets you have, though. This is a way to summarize your entire job history in quick-to-read format – and sometimes during a job hunt, being able to get to the point and grab the recruiter’s interest is the best way to get your foot in the door. Think of a bio as your entire resume put into words. Most bios have a standard format. In paragraph one, talk about your most recent position and accomplishments there, specifically how they relate to the job you are applying for. If you have teaching or research experience, training experience, certifications, or management experience, talk about them in paragraph two. Paragraph three and four are for highlighting publications, education, certifications, associations, etc. To wrap up your bio, provide your contact info and availability (dates and times). Where to use What? For most positions, you will know exactly what kind of application to use, because the job announcement will state what materials are needed – resume, CV, bio, cover letter, skill set, etc. If there is any confusion, choose whatever the industry standard is (CV for technical fields, resume for everything else) or choose which of your documents is the strongest. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: About Me, PostADay, Professional Development, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

Read the article

Wireless not working on Dell XPS 17 after installing 12.04

- by user60622

I (linux newbie) have a Dell XPS 17 and tried to install Ubuntu 12.04. After installation all WLAN accesspoints near are detected. But I can not connect (but I am able to connect with other computers as well as with Dell XPS 17 under windows). Outputs: iwconfig lo no wireless extensions. wlan0 IEEE 802.11bg ESSID:"LerchenPoint" Mode:Managed Frequency:2.412 GHz Access Point: 58:6D:8F:A0:2D:58 Bit Rate=1 Mb/s Tx-Power=14 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=70/70 Signal level=-37 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:19 Missed beacon:0 eth0 no wireless extensions. sudo lshw -class network *-network description: Wireless interface product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:04:00.0 logical name: wlan0 version: 00 serial: 00:26:c7:99:98:28 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-24-generic firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bg resources: irq:50 memory:f0400000-f0401fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:0a:00.0 logical name: eth0 version: 06 serial: f0:4d:a2:56:e3:94 size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-2.fw ip=192.168.0.123 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s resources: irq:47 ioport:6000(size=256) memory:f0a04000-f0a04fff memory:f0a00000-f0a03fff dmesg | grep iwl [ 10.157531] iwlwifi 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 10.157561] iwlwifi 0000:04:00.0: setting latency timer to 64 [ 10.157598] iwlwifi 0000:04:00.0: pci_resource_len = 0x00002000 [ 10.157599] iwlwifi 0000:04:00.0: pci_resource_base = ffffc90011090000 [ 10.157601] iwlwifi 0000:04:00.0: HW Revision ID = 0x0 [ 10.157731] iwlwifi 0000:04:00.0: irq 50 for MSI/MSI-X [ 10.157834] iwlwifi 0000:04:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C [ 10.157976] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S [ 10.179772] iwlwifi 0000:04:00.0: device EEPROM VER=0x15d, CALIB=0x6 [ 10.179775] iwlwifi 0000:04:00.0: Device SKU: 0X50 [ 10.179777] iwlwifi 0000:04:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3 [ 10.179796] iwlwifi 0000:04:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels [ 10.574728] iwlwifi 0000:04:00.0: loaded firmware version 39.31.5.1 build 35138 [ 10.726409] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 19.714132] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S [ 19.777862] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S [ 2251.603089] iwlwifi 0000:04:00.0: PCI INT A disabled [ 2266.578350] iwlwifi 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2266.578399] iwlwifi 0000:04:00.0: setting latency timer to 64 [ 2266.578435] iwlwifi 0000:04:00.0: pci_resource_len = 0x00002000 [ 2266.578437] iwlwifi 0000:04:00.0: pci_resource_base = ffffc90011090000 [ 2266.578439] iwlwifi 0000:04:00.0: HW Revision ID = 0x0 [ 2266.578704] iwlwifi 0000:04:00.0: irq 50 for MSI/MSI-X [ 2266.578808] iwlwifi 0000:04:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C [ 2266.578916] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S [ 2266.600709] iwlwifi 0000:04:00.0: device EEPROM VER=0x15d, CALIB=0x6 [ 2266.600712] iwlwifi 0000:04:00.0: Device SKU: 0X50 [ 2266.600713] iwlwifi 0000:04:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3 [ 2266.600727] iwlwifi 0000:04:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels [ 2266.605978] iwlwifi 0000:04:00.0: loaded firmware version 39.31.5.1 build 35138 [ 2266.606331] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 2266.614179] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S [ 2266.681541] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S Solutions I tried: rfkill list all 0: dell-wifi: Wireless LAN Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no echo "options iwlwifi 11n_disable=1" | sudo tee /etc/modprobe.d/iwlwifi.conf options iwlwifi 11n_disable=1 sudo modprobe -rfv iwlwifi WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release. rmmod /lib/modules/3.2.0-24-generic/kernel/drivers/net/wireless/iwlwifi/iwlwifi.ko rmmod /lib/modules/3.2.0-24-generic/kernel/net/mac80211/mac80211.ko rmmod /lib/modules/3.2.0-24-generic/kernel/net/wireless/cfg80211.ko sudo modprobe iwlwifi WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release. replacing iwlwifi-1000-5.ucode (current driver) against iwlwifi-1000-3.ucode sudo jockey-gtk: (jockey-gtk:2493): Gtk-CRITICAL **: gtk_icon_set_render_icon_pixbuf: assertion icon_set != NULL' failed (jockey-gtk:2493): Gtk-CRITICAL **: gtk_icon_set_render_icon_pixbuf: assertion icon_set != NULL' failed nothing is listet in "Additional drivers" (german: "Zusätzliche Treiber"). gksudo gedit /etc/modprobe.d/blacklist.conf add "blacklist acer_wmi" Any help would be appreciated very much. Thanks!!

Read the article

RDA Health Checks for SOA

- by ShawnBailey

What is a health check in RDA? A health check evaluates something in your environment to determine whether a change needs to be considered in order to avoid a problem or optimize fuctionality. Examples of what this 'something' might be are: Configuration Parameters JVM Options Runtime Statistics What have we done for SOA? In the latest release of RDA, 4.30, we have added a Rule Set for SOA called 'Oracle SOA 11g (11.1.1) Post Installation (Generic)'. This Rule Set contains 14 SOA related health checks. These checks were all derived from common issues / solutions we see in support of the SOA product. Many of the recommendations come from the product documentation while others are covered in the SOA Knowledge Base. Our goal is that you will be able to easily identify the areas of concern and understand the guidance available from the output of the Rule Set. Running the health checks for SOA The rules that the checks use are installed with RDA and bundled by product or functional area into what are called 'Rule Sets'. To view the available Rule Sets simply run the command from the RDA home location: rda.cmd (or .sh) -dT hcve This will bring up a list of the available HCVE (Health Check / Verification Engine) Rule Sets. Each Rule Set contains a group of related rules that are used for evalutation and display of results. A rule can be considered synonymous with a single health check and they are assigned an ID, Name and Description that can be seen when they are executed. The Rule Set for SOA is option number 11 and you just enter this selection at the prompt. The Rule Set will then execute to completion. After running an HCVE Rule Set the tool will write the output to the RDA_HOME/output folder. The simplest way to view the output is to drag the .htm file to a browser but of course it can also be uploaded to a Service Request for evaluation by Oracle Support. Many of the Rule Sets will prompt you for information before they can execute their rules but the SOA Rule Set will identify the SOA domains configured in your RDA setup.cfg file. This means that you don't need to answer all of the questions again about where stuff is but it also means that you must have configured RDA for SOA. To run the Rule Set: Download the latest version of RDA from MOS Doc ID 314422.1 Configure RDA for your SOA domains. Detailed steps can be found here In it's simplest form the command is 'rda.cmd (.sh) -S SOA' Go to the RDA home location and enter the command 'rda.cmd (or .sh) -dT hcve' Select option '11' It should be noted that this our first release of a SOA Rule Set so there will probably be some things we need to clean up or fix. None of these rules will actually modify anything on your system as they are read only and do the evaluations internally. Please let us know if you have any issues with the rules or ideas for new ones so we can make them as useful as possible. The Checks Here is a list of the SOA health checks by ID, Name and Description. ID Name Description A00100 SOA Domain Homes Lists the SOA domains that were indentified from the RDA setup.cfg file A00200 Coherence Protocol Conflict Checks to see if you have both Unicast and Multicast configured in the same domain. Checks both the setDomainEnv and config.xml entries (if it exists). We recommend Unicast with fully qualified host names or IP addresses. A00210 Coherence Fully Qualified Host Checks that the host names are fully qualified or that IP addresses are used. Will fail if unqualified host names are detected. A00220 Unicast Local Host Checks that the Coherence localhost is specified for use with Unicast A00300 JTA Timeout Checks that the JTA timeout is configured for the domain and lists the value. The bundled rule will only list the current values of the JTA timeout for each SOA Domain. In the future the rule with fail with a warning if the value is 300 seconds or lower. It is recommended that timeouts follow the pattern 'syncMaxWaitTime' < EJB Timeouts < JTA Timeout. The 300 second value is important because the EJB Timeouts default to 300 seconds. Additional information can be found in MOS Doc ID 880313.1. A00310 XA Max Time Checks that the JTA Maximum XA call time is set for the domain. Fails if it is not explicitly set or if the value is less than or equal to the default of 12000 ms. A00320 XA Timeout Checks that the XA timeout is enabled and that the value is '0' for the SOA Data Source (SOADataSource-jdbc.xml) A00330 JDBC Statement Timeout Checks that the Statement Timeout is set for all SOA Data Sources. Fails if the value is not set or if it is set to the default of -1. A00400 XA Driver Checks that the SOA Data Source is configured to use an XA driver. Fails if it is not. A00410 JDBC Capacity Settings Checks that the minimum and maximum capacity are equal for all SOA Data Sources. Fails if they are not and lists specifically which data sources failed. A00500 SOA Roles Checks that the default SOA roles 'SOAAdmin' and 'SOAOperator' are configured for the soa-infra application in the file sytem-jazn-data.xml. Fails if they are not. A00700 SOA-INFRA Deployment Checks that the soa-infra application is deployed to either a cluster, all members of a cluster or a stand alone server. A00710 SOA Deployments Checks that the SOA related applications are deployed to the same domain members as soa-infra. A00720 SOA Library Deployments Checks that the SOA related libraries are deployed to the same domain members as soa-infra. A00730 Data Source Deployments Checks that the SOA Data Sources are all targeted to the same domain members as soa-infra

Read the article

WebSocket API 1.1 released!

- by Pavel Bucek

Its my please to announce that JSR 356 – Java API for WebSocket maintenance release ballot vote finished with majority of “yes” votes (actually, only one eligible voter did not vote, all other votes were “yeses”). New release is maintenance release and it addresses only one issue: WEBSOCKET_SPEC-226. What changed in the 1.1? Version 1.1 is fully backwards compatible with version 1.0, there are only two methods added to javax.websocket.Session: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 /** * Register to handle to incoming messages in this conversation. A maximum of one message handler per * native websocket message type (text, binary, pong) may be added to each Session. I.e. a maximum * of one message handler to handle incoming text messages a maximum of one message handler for * handling incoming binary messages, and a maximum of one for handling incoming pong * messages. For further details of which message handlers handle which of the native websocket * message types please see {@link MessageHandler.Whole} and {@link MessageHandler.Partial}. * Adding more than one of any one type will result in a runtime exception. * * @param clazz type of the message processed by message handler to be registered. * @param handler whole message handler to be added. * @throws IllegalStateException if there is already a MessageHandler registered for the same native * websocket message type as this handler. */ public void addMessageHandler(Class<T> clazz, MessageHandler.Whole<T> handler); /** * Register to handle to incoming messages in this conversation. A maximum of one message handler per * native websocket message type (text, binary, pong) may be added to each Session. I.e. a maximum * of one message handler to handle incoming text messages a maximum of one message handler for * handling incoming binary messages, and a maximum of one for handling incoming pong * messages. For further details of which message handlers handle which of the native websocket * message types please see {@link MessageHandler.Whole} and {@link MessageHandler.Partial}. * Adding more than one of any one type will result in a runtime exception. * * * @param clazz type of the message processed by message handler to be registered. * @param handler partial message handler to be added. * @throws IllegalStateException if there is already a MessageHandler registered for the same native * websocket message type as this handler. */ public void addMessageHandler(Class<T> clazz, MessageHandler.Partial<T> handler); Why do we need to add those methods? Short and not precise version: to support Lambda expressions as MessageHandlers. Longer and slightly more precise explanation: old Session#addMessageHandler method (which is still there and works as it worked till now) does rely on getting the generic parameter during the runtime, which is not (always) possible. The unfortunate part is that it works for some common cases and the expert group did not catch this issue before 1.0 release because of that. The issue is really clearly visible when Lambdas are used as message handlers: 1 2 3 session.addMessageHandler(message -> { System.out.println("### Received: " + message); }); There is no way for the JSR 356 implementation to get the type of the used Lambda expression, thus this call will always result in an exception. Since all modern IDEs do recommend to use Lambda expressions when possible and MessageHandler interfaces are single method interfaces, it basically just scream “use Lambdas” all over the place but when you do that, the application will fail during runtime. Only solution we currently have is to explicitly provide the type of registered MessageHandler. (There might be another sometime in the future when generic type reification is introduced, but that is not going to happen soon enough). So the example above will then be: 1 2 3 session.addMessageHandler(String.class, message -> { System.out.println("### Received: " + message); }); and voila, it works. There are some limitations – you cannot do 1 List<String>.class , so you will need to encapsulate these types when you want to use them in MessageHandler implementation (something like “class MyType extends ArrayList<String>”). There is no better way how to solve this issue, because Java currently does not provide good way how to describe generic types. The api itself is available on maven central, look for javax.websocket:javax.websocket-api:1.1. The reference implementation is project Tyrus, which implements WebSocket API 1.1 from version 1.8.

Read the article

Reflections from the Young Prisms

- by Oracle OpenWorld Blog Team

By Karen Shamban The Young Prisms began their musical journey in San Francisco, and it's here they return to bring their unique sound to the Oracle OpenWorld Music Festival. We asked them to tell us their thoughts on music, performing, and what they like in an audience. Here's what they had to say: Q. What do you like best about performing in front of a live audience?A. There are a lot of things to love about playing in front of people. The best part is definitely the nights when the energy the audience brings shows through. Although it always differs from city to city and person to person, when you play to a full house and people are really getting into it, it's like no other feeling.Q. How do you use technology in creating and delivering your music?A. Well, we actually use a lot more electronic components than people realize. Pretty much every string instrument played either live or on recording has been filtered through numerous electronic effects. Matt uses somewhere around 12 or 14 every time we play live. Giovanni has six. Most of our writing and demoing is done with drum sequencers and samplers too, so it's safe to say we use technology to our advantage in the writing process. Live is a bit different, since we keep it to the basics with guitars and acoustic drums. We also tend to use projections when we play live, so technology helps us do that fairly easily as well.Q. Do you prefer smaller, intimate venues or larger, louder ones? Why?A. Couldn’t say we have a real preference in venue size. I mean, its always great to get to play through a massive killer sound system, but small venues when packed full are equally as special if not more so, because of the intimacy of it. Some of my favorite shows I've seen as an audience member/ fan have been at the smaller venues in San Francisco.Q. What about your fans surprises you?A. Sometimes the older guys are a surprise. We've played shows where there are more older guys in their 40s and 50s, who come and stare and take notes at our effects pedals. Then there are kids our age or in their 20s. Sometimes it's surprising to think that the older guys relate to what we're doing more than our peers and friends in our age group.Q. What about your live act surprises your fans?A. I think people are often surprised by how shy we can be. It feels like people expect us to be really rowdy and throw things and make really loud noises and get really aggressive on stage because some of the sounds we use can have an abrasive element to them. People expect Matt to have some kind of Kurt Cobain attitude, which he doesn’t at all. So it seems it surprises people to see musicians playing loud and noisy songs in their early and mid 20s being fairly tame and calm on stage.Q. There are going to be a lot of technical people (you could call them geeks) in the Oracle crowd -- what are they going to love about your performance?A. Hopefully most of them are pedal nerds like we are and like the previously mentioned “older dude crowd.” Besides that I hope they’d be into the projections and group of songs we're going to play for them.Q. What's new and different in the music you're making today, versus a year or two ago?A. I'd say there is more focus on the songwriting now and less of the noise today than last year. I think it's pretty evident on the new record compared to the last two. On the first two records we made as YP, we had another guitar player and songwriter who no longer plays with us. So the process in which we develop songs is different as well.Q. Have you been on tour recently? If so, what do you like about touring, and what do you dislike?A. Touring is amazing. Some people might tell you different if they've been doing it for what they'd call too long, but for us it's really a great chance to play for people who care about the music we're making and also to see and explore the world. Getting to visit so many different cities and explore so many different cultures is amazing. Of course we love getting into cultural foods too. Stefanie is a fashion geek so getting to go to New York as often as we do as well as getting to play in London and Paris is always especially fun for her.Q. Ever think about playing another kind of music? If so, what, and why?A. Never really thought about wanting to do anything drastically different. I think the style of music we play has a lot to do with the stuff we have been listening to both growing up and now. It wasn’t really a conscious decision to make sure it was a certain sound, so I'm not sure we've ever thought about doing a way different genre or whatever like electronic music or country. Although there have been times we've had conversations where we discuss possibly doing quiet sets or using the string synth sounds.Q. What are the top three things people should know about your music?A1. We like noise.A2. We use ambience and atmosphere as much as as we can.A3. Yes, the vocals are supposed to be mixed in with the guitars. Get more info: Oracle OpenWorld Music Festival Young Prisms

Read the article

For Programmers familiar with ACM API? Drawing Initials [closed]

- by user71992

Possible Duplicate: For Programmers familiar with ACM API? Drawing Initials I came across an exercise (in the book "The Art and Science of Java" by Eric Roberts) that requires using only GArc and GLine classes to create a lettering library which draws your initials on the canvas. This should be made independent of the GLabel class. I'd like to know the correct approach to use in solving this problem. I'm not sure what I have so far is good enough (I'm thinking it's too long). The questions requires that I use a good Top-Down approach. Here's my code so far: //Passes letters to GLetter objects and draws them on the canvas package artScienceJavaExercises.chapter8; import acm.program.*; //import acm.graphics.*; public class DrawInitials extends GraphicsProgram{ public void init(){ resize(400,400); } public void run(){ //String let = readLine("Letter?: "); letter = new GLetter("l"); add(letter, (getWidth()-letter.getWidth()*2)/2, (getHeight()-letter.getHeight())/2); add(new GLetter("o"), (letter.getX()+letter.getWidth()), letter.getY()); } private GLetter letter; } //GLetter Class package artScienceJavaExercises.chapter8; import acm.graphics.*; import java.awt.*; public class GLetter extends GCompound{ private static final int ONE_THIRD = 30; private static final int ROW_2_HEIGHT = 40; private GArc[] arc = new GArc[4]; private GLine[] line = new GLine[24]; public GLetter(String s){ line[0] = new GLine(0,0, ONE_THIRD, 0); line[1] = new GLine(ONE_THIRD,0, ONE_THIRD*2, 0); line[2] = new GLine(ONE_THIRD*2,0, ONE_THIRD*3, 0); line[3] = new GLine(0,0, 0,ONE_THIRD); line[4] = new GLine(ONE_THIRD,0, ONE_THIRD, ONE_THIRD); line[5] = new GLine(ONE_THIRD*2,0, ONE_THIRD*2, ONE_THIRD); line[6] = new GLine(ONE_THIRD*3,0, ONE_THIRD*3, ONE_THIRD); line[7] = new GLine(0,ONE_THIRD, ONE_THIRD*2, ONE_THIRD); line[8] = new GLine(ONE_THIRD,ONE_THIRD, ONE_THIRD*2, ONE_THIRD); line[9] = new GLine(ONE_THIRD*2,ONE_THIRD, ONE_THIRD*3, ONE_THIRD); line[10] = new GLine(0,ONE_THIRD, 0, ONE_THIRD+ROW_2_HEIGHT); line[11] = new GLine(ONE_THIRD, ONE_THIRD, ONE_THIRD, ONE_THIRD+ROW_2_HEIGHT); line[12] = new GLine(ONE_THIRD*2,ONE_THIRD, ONE_THIRD*2, ONE_THIRD+ROW_2_HEIGHT); line[13] = new GLine(ONE_THIRD*3,ONE_THIRD, ONE_THIRD*3, ONE_THIRD+ROW_2_HEIGHT); line[14] = new GLine(0, ONE_THIRD+ROW_2_HEIGHT, ONE_THIRD, ONE_THIRD+ROW_2_HEIGHT); line[15] = new GLine(ONE_THIRD, ONE_THIRD+ROW_2_HEIGHT, ONE_THIRD*2, ONE_THIRD+ROW_2_HEIGHT); line[16] = new GLine(ONE_THIRD*2, ONE_THIRD+ROW_2_HEIGHT, ONE_THIRD*3, ONE_THIRD+ROW_2_HEIGHT); line[17] = new GLine(0, ONE_THIRD+ROW_2_HEIGHT, 0, ONE_THIRD*2+ROW_2_HEIGHT); line[18] = new GLine(ONE_THIRD, ONE_THIRD+ROW_2_HEIGHT, ONE_THIRD, ONE_THIRD*2+ROW_2_HEIGHT); line[19] = new GLine(ONE_THIRD*2, ONE_THIRD+ROW_2_HEIGHT, ONE_THIRD*2, ONE_THIRD*2+ROW_2_HEIGHT); line[20] = new GLine(ONE_THIRD*3, ONE_THIRD+ROW_2_HEIGHT, ONE_THIRD*3, ONE_THIRD*2+ROW_2_HEIGHT); line[21] = new GLine(0,ONE_THIRD*2+ROW_2_HEIGHT, ONE_THIRD, ONE_THIRD*2+ROW_2_HEIGHT); line[22] = new GLine(ONE_THIRD, ONE_THIRD*2+ROW_2_HEIGHT, ONE_THIRD*2, ONE_THIRD*2+ROW_2_HEIGHT); line[23] = new GLine(ONE_THIRD*2,ONE_THIRD*2+ROW_2_HEIGHT, ONE_THIRD*3, ONE_THIRD*2+ROW_2_HEIGHT); for(int i = 0; i<line.length; i++){ add(line[i]); line[i].setColor(Color.BLACK); line[i].setVisible(false); } arc[0] = new GArc(getWidth(), getHeight(), 106.699, 49.341); arc[1] = new GArc(getWidth(), getHeight(), 23.96, 49.341); arc[2] = new GArc(getWidth(), getHeight(), -23.96, -49.341); arc[3] = new GArc(0,0,getWidth(), getHeight(), -106.699, -49.341); for(int i = 0; i<arc.length; i++){ add(arc[i],0,0); arc[i].setColor(Color.BLACK); arc[i].setVisible(false); } paintLetter(s); } private void paintLetter(String s){ if (s.equalsIgnoreCase("l")){ turnOn(line[3]); turnOn(line[10]); turnOn(line[17]); turnOn(line[21]); turnOn(line[22]); turnOn(line[23]); } else if(s.equalsIgnoreCase("o")){ for(int i = 0; i<4; ++i){ turnOn(arc[i]); } turnOn(line[1]); turnOn(line[10]); turnOn(line[13]); turnOn(line[22]); } } private void turnOn(GObject g){ g.setVisible(true); } } I created a class (GLetter.java) with arrays for GArc and GLine objects. They are positioned in certain ways thereby turning certain Glines and/or GArcs on or off (changing visiblity) would create a pattern for a letter. This Gletter uses the if/else statements to determine which pattern to create - this makes me feel my code is too long. There is another class (DrawInitials.java) that simulates a GraphicsProgram and allows the user to pass certain letters as arguments to the GLetter object. I've used 'L' and 'O' as examples. However, I posted this because I'm not sure I'm using the right approach. That's why I need your help. I feel MY CODE IS TOO LONG! The code above is not the complete project...it only draws letters 'L' and 'O' for now.

Read the article

Skype support and dead parrot sketches

- by Greg Low

We as an industry have a lot to answer for. One thing is the level of support provided for users. Here's the conversation I'm having with Skype right now. It feels like being in a Monty Python skit. I was really hoping that when Microsoft purchased Skype that things might improve. 8:33:44 PM greglowInitial Question/Comment: Subscriptions (Unlimited Country, Unlimited Europe, Unlimited Region, Unlimited World)8:33:44 PM SystemThank you for contacting Skype Customer Support!8:33:49 PM SystemDonna Faye has joined this session!8:33:50 PM SystemConnected with Donna Faye8:33:50 PM SystemThank you for contacting Skype Customer Support!8:33:54 PM SystemPlease hold for the next available Live Support Agent.8:33:59 PM Donna FayeHello! Welcome to Skype Live Support! My name is Donna L. How may I help you?8:34:09 PM greglowI've got a subscription (skypename greglow)8:34:21 PM greglowIt's set to auto-renew8:34:45 PM greglowWhy have I been getting messages about my Skype number expiring, if it's set to renew automatically8:34:54 PM greglowand has recently renewed automatically8:35:09 PM Donna FayeThank you for the information.8:35:29 PM Donna FayeTo better assist you may I know your Skype name, please?8:35:37 PM greglowgreglow8:35:44 PM Donna FayeThank you.8:36:14 PM Donna FayeI understand your concern that you receive an email notification stating that your calling subscription will about to expire. Am I right?8:36:43 PM greglowNo, I got an email telling me that one of my Skype numbers was going to expire8:37:08 PM greglowWhen I went to the website, it said it was part of the subscription and the subscription was set to auto-renew8:37:18 PM greglowThe subscription auto-renewed on Oct XXth8:37:24 PM greglowBut the number still expired8:37:43 PM greglowWhen I logged on today, it said that the number had expired and that I had 52 days left to reactivate it8:37:58 PM greglowI did that but am trying to understand why that happens at all8:38:36 PM greglowWhy do you expire numbers that are part of auto-renewing subscriptions?8:39:49 PM Donna FayeUpon checking your account, your calling subscription link to three Online Numbers.8:39:55 PM greglowcorrect8:40:10 PM greglowbut until an hour or so ago, one of them had expired. why?8:40:54 PM Donna FayeLet me explain to you that now Online Number are detach to a calling subscription unlike before it was attach to the calling subscription so therefore each Online Number will recur individually.8:41:29 PM Donna FayeUpon checking your account it shows that all your Online Number will expire on October XX, 20138:41:44 PM Donna FayeIf you don't want to be charged again for you can cancel it anytime.8:41:59 PM greglowI have set it to charge automatically8:42:06 PM greglowso why do the numbers expire?8:42:32 PM Donna FayeNo they are not expired they are all active.8:42:33 PM greglowif there is an automatic payment set up, why does anything expire?8:42:52 PM greglowyes, but one of them was expired, and I only fixed it a few hours ago8:43:07 PM greglowI'm trying to understand why it expired8:44:54 PM Donna FayeThe email you got just notify you that you should have good enough funding source of your calling subscription and Online Number in order for this to recur.8:45:12 PM greglowAgreed. I did that but the number still expired. Why?8:45:38 PM Donna FayeHowever do not worry on this hence all Online Number are active and not expired.8:45:41 PM greglowWhen I logged on today it said that the number had expired and that I had 52 days left to reactivate it. Why did that happen?8:46:14 PM Donna FayeMay I know the Online Number you are pertaining, please?The number that had expired was (07) XXXX XXXX (Australia)8:49:19 PM Donna FayeOkay, do not worry on this Online Number because this will expire on October XX, 2013.8:49:38 PM Donna FayeThank you for all the information.8:49:46 PM greglowI understand that it won't expire now until next year. I'm trying to understand why it stopped working this time8:49:51 PM greglowso I can avoid that next time8:50:39 PM Donna FayeWhat do yo stop working, you mean that Online Number is unable to be reach out?8:50:59 PM Donna Faye*what do you mean by stop working8:51:18 PM greglowThe Skype number +61 7 XXXX XXXX stopped working because it expired8:51:32 PM Donna FayeNo, this into expired.8:51:34 PM greglowI'm trying to understand why it expired8:51:50 PM greglowSorry I don't follow "this into expired"8:52:39 PM Donna FayeLet me inform you that this Online Number is not expired.8:52:54 PM Donna FayePlease disregard the notification you see on your Skype account.8:53:02 PM greglowSorry, this is getting very frustrating. I already told you I fixed it today. I want to know why it happened.8:53:20 PM Donna FayeHence I can rest assured you that this is active until October XX, 2013.8:53:21 PM greglowSo I can avoid it happening again, on this account, or on our other accounts8:53:34 PM greglowCan I speak to someone who really understands this please?Donna FayeSkype send a notification to Skype users for their Skype product in order for them to be aware the expiration of your product however your Online Number still active on your account hence when your calling subscription Unlimited World recur your Online Number also recur. 8:57:59 PM Donna Faye I do apologize for this matter, please allow me to resolve this issue for you. 9:02:48 PM greglow My question is still the same: if it's set to auto-pay, why did it expire? 9:03:50 PM greglow Why did it stop working? Why did I have to "reactivate" it? 9:04:08 PM greglow Why didn't it just keep working if it's set to auto-pay? 9:04:30 PM greglow This isn't a difficult concept 9:04:34 PM Donna Faye Let me clarify to you that this is not the really expired what is emphasizing on this is when you don't have good enough funding source when you calling subscription recur the Online Number will possibly expired but seem that you have a good funding source then this will continue until 2013. 9:05:10 PM greglow When I logged on today, it was not working, and your website said it had expired and that I had 52 days left to reactivate it 9:05:17 PM greglow Why?and so on, and so on, and so on....

Search Results

Search found 6602 results on 265 pages for 'fedora 14'.

Page 214/265 | < Previous Page | 210 211 212 213 214 215 216 217 218 219 220 221 | Next Page >

- by David Totzke

- by James

- by mastazi

- by Philluminati

- by maria

- by Bruno.Borges

- by Ricardo Peres

- by maria

- by Brian

- by Roy Hocknull

- by Tom Hines

- by Jake Sweet

- by Darin Pendergraft

- by Denise McInerney

- by Janice J. Heiss

- by Rob Farley

- by Shadi Al Mahallawy

- by Joseph St. Pierre

- by Pinal Dave

- by user60622

- by ShawnBailey

- by Pavel Bucek

- by Oracle OpenWorld Blog Team

- by user71992

- by Greg Low

< Previous Page | 210 211 212 213 214 215 216 217 218 219 220 221 | Next Page >