Search Results

Search found 89638 results on 3586 pages for 'file table'.

Page 2303/3586 | < Previous Page | 2299 2300 2301 2302 2303 2304 2305 2306 2307 2308 2309 2310  | Next Page >

• The Numbers of Customer Experience

  - by Christie Flanagan

  This week, we’ll be continuing our conversations about Customer Experience (CX) on the Oracle WebCenter blog.  While we all know that customer experience is critically important for acquiring new customers and engendering long term brand loyalty, I thought we could kick this week off by taking a look at the numbers of customer experience.   I’m sure you’ll agree that nothing quite puts things into perspective like numbers and figures. A whopping 86% of consumers say that they are willing to pay more for a better customer experience.  But many companies are failing to step up to the challenge.  And when companies fail deliver on customer experience expectations, they leave money on the table. A huge percentage of customers, 89%, begin doing business with a competitor following a poor customer experience. Breaking up isn’t hard to do and today’s empowered customers have no qualms about taking their business elsewhere when their expectations for customer experience are not met. Over a quarter of consumers, 26%, posted a negative comment on a social networking site like Facebook or Twitter following a poor customer experience. Today, individual customer service failures have the ability to easily snowball.  An unsatisfied customer has the ability to easily share their rancor with their entire social network and chip away at your brand’s reputation. A large number of consumers, 79%,  who shared complaints about poor customer experience online had their complaints ignored.  Companies ignore customer complaints at their own peril.  And unsatisfied customers, when handled effectively, have the potential to become advocates for your brand.  Of the 21% of consumers who did get responses to complaints, more than half had positive reactions to the same company about which they were previously complaining. Half of consumers will give a brand only a week to respond to a question before they stop doing business with them.  The clock is ticking when customers have questions about your brand and a week is an eternity in the realm of customer experience.  The source for these stats is the 2011 Customer Experience Impact (CEI) Report, which explores the relationship between consumers and brands.  The report is based on a survey commissioned by RightNow (acquired by Oracle in 2012) and conducted by Harris Interactive. If you’re interested in seeing more facts and figures about customer experience, download the full report.

  Read the article

• CodePlex Daily Summary for Thursday, November 01, 2012

  CodePlex Daily Summary for Thursday, November 01, 2012Popular ReleasesAccess 2010 Application Platform - Build Your Own Database: Application Platform - 0.0.1: Initial Release This is the first version of the database. At the moment is all contained in one file to make development easier, but the obvious idea would be to split it into Front and Back End for a production version of the tool. The features it contains at the moment are the "Core" features.Python Tools for Visual Studio: Python Tools for Visual Studio 1.5: We’re pleased to announce the release of Python Tools for Visual Studio 1.5 RTM. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including CPython/IronPython, Edit/Intellisense/Debug/Profile, Cloud, HPC, IPython, etc. support. For a quick overview of the general IDE experience, please watch this video There are a number of exciting improvement in this release comp...Devpad: 4.25: Whats new for Devpad 4.25: New Theme support New Export Wordpress Minor Bug Fix's, improvements and speed upsAssaultCube Reloaded: 2.5.5: Linux has Ubuntu 11.10 32-bit precompiled binaries and Ubuntu 10.10 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, please wait while we try to package for those OSes. Try to compile it. If it fails, download a virtual machine. The server pack is ready for both Windows and Linux, but you might need to compile your own for Linux (source included) Changelog: Fixed potential bot bugs: Map change, OpenAL...Edi: Edi 1.0 with DarkExpression: Added DarkExpression theme (dialogs and message boxes are not completely themed, yet)MCEBuddy 2.x: MCEBuddy 2.3.6: Changelog for 2.3.6 (32bit and 64bit) 1. Fixed a bug in multichannel audio conversion failure. AAC does not support 6 channel audio, MCEBuddy now checks for it and force the output to 2 channel if AAC codec is specified 2. Fixed a bug in Original Broadcast Date and Time. Original Broadcast Date and Time is reported in UTC timezone in WTV metadata. TVDB and MovieDB dates are reported in network timezone. It is assumed the video is recorded and converted on the same machine, i.e. local timezone...MVVM Light Toolkit: MVVM Light Toolkit V4.1 for Visual Studio 2012: This version only supports Visual Studio 2012 (and all Express editions too). If you use Visual Studio 2010, please stay tuned, we will publish an update in a few days with support for VS10. V4.1 supports: Windows Phone 8 Windows 8 (Windows RT) Silverlight 5 Silverlight 4 WPF 4.5 WPF 4 WPF 3.5 And the following development environments: Visual Studio 2012 (Pro, Premium, Ultimate) Visual Studio 2012 Express for Windows 8 Visual Studio 2012 Express for Windows Phone 8 Visual...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.73: Fix issue in Discussion #401101 (unreferenced var in a for-in statement was getting removed). add the grouping operator to the parsed output so that unminified parsed code is closer to the original. Will still strip unneeded parens later, if minifying. more cleaning of references as they are minified out of the code.Liberty: v3.4.0.1 Release 28th October 2012: Change Log -Fixed -H4 Fixed the save verification screen showing incorrect mission and difficulty information for some saves -H4 Hopefully fixed the issue where progress did not save between missions and saves would not revert correctly -H3 Fixed crashes that occurred when trying to load player information -Proper exception dialogs will now show in place of crashesPlayer Framework by Microsoft: Player Framework for Windows 8 (Preview 7): This release is compatible with the version of the Smooth Streaming SDK released today (10/26). Release 1 of the player framework is expected to be available next week. IMPROVEMENTS & FIXESIMPORTANT: List of breaking changes from preview 6 Support for the latest smooth streaming SDK. Xaml only: Support for moving any of the UI elements outside the MediaPlayer (e.g. into the appbar). Note: Equivelent changes to the JS version due in coming week. Support for localizing all text used in t...Send multiple SMS via Way2SMS C#: SMS 1.1: Added support for 160by2Quick Launch: Quick Launch 1.0: A Lightweight and Fast Way to Manage and Launch Thousands of Tools and ApplicationsPress Win+Q and start to search and run. http://www.codeplex.com/Download?ProjectName=quicklaunch&DownloadId=523536Orchard Project: Orchard 1.6: Please read our release notes for Orchard 1.6: http://docs.orchardproject.net/Documentation/Orchard-1-6-Release-Notes Please do not post questions as reviews. Questions should be posted in the Discussions tab, where they will usually get promptly responded to. If you post a question as a review, you will pollute the rating, and you won't get an answer.Media Companion: Media Companion 3.507b: Once again, it has been some time since our release, and there have been a number changes since then. It is hoped that these changes will address some of the issues users have been experiencing, and of course, work continues! New Features: Added support for adding Home Movies. Option to sort Movies by votes. Added 'selectedBrowser' preference used when opening links in an external browser. Added option to fallback to getting runtime from the movie file if not available on IMDB. Added new Big...MSBuild Extension Pack: October 2012: Release Blog Post The MSBuild Extension Pack October 2012 release provides a collection of over 475 MSBuild tasks. A high level summary of what the tasks currently cover includes the following: System Items: Active Directory, Certificates, COM+, Console, Date and Time, Drives, Environment Variables, Event Logs, Files and Folders, FTP, GAC, Network, Performance Counters, Registry, Services, Sound Code: Assemblies, AsyncExec, CAB Files, Code Signing, DynamicExecute, File Detokenisation, GUI...NAudio: NAudio 1.6: Release notes at http://mark-dot-net.blogspot.co.uk/2012/10/naudio-16-release-notes-10th.htmlPowerShell Community Extensions: 2.1 Production: PowerShell Community Extensions 2.1 Release NotesOct 25, 2012 This version of PSCX supports both Windows PowerShell 2.0 and 3.0. See the ReleaseNotes.txt download above for more information.Umbraco CMS: Umbraco 4.9.1: Umbraco 4.9.1 is a bugfix release to fix major issues in 4.9.0 BugfixesThe full list of fixes can be found in the issue tracker's filtered results. A summary: Split buttons work again, you can now also scroll easier when the list is too long for the screen Media and Content pickers have information of the full path of the picked item Fixed: Publish status may not be accurate on nodes with large doctypes Fixed: 2 media folders and recycle bins after upgrade to 4.9 The template/code ...AcDown????? - AcDown Downloader Framework: AcDown????? v4.2.2: ??●AcDown??????????、??、??、???????。????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????，??????、????????????????。 ● AcDown??????????????????，????????????????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???，????????.NET Framework 2.0???(x86)，?????"?????????"??? (2)???????????Linux???，????????Mono?? ??2...Rawr: Rawr 5.0.2: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr Addon (NOT UPDATED YET FOR MOP)We now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including ba...New ProjectsAsbesto: Proyecto grupo: "2ravas" para Laboratorio de Computación IV de la carrera TSP de la UTN-FRGP Realizado en C# y ASP.NET en Visual Studio 2012 y SQL Server 2012C++ Diamond printer on console without if statement: prints just a diamond with stars(*). only one important and funny feature is that it's not using 'if' statement. C++ used.CloudTest: Test cloud computing projectEnumeration of objects Class Library C#: At core level in Java I like extension of traditional enum type permiting use as the elements instances of a class. The project implements the same idea by C# with some more advanced features like a set type with boolean operators extending idea of FlagsAttributeEquation Inversion: Visual Studion 2008 Add-in for equation inversions.ESENT Serialization Class Library: ESENT Serialization class library is built above Managed ESENT. It allows you to store your objects in the underlying extensible storage engine database.ForceHttps: Very simple httpModule to ensure that all http requests are https. 1. Drop the dll into your website's bin directory 2. Update httpModules section of your web.config to reference the dll 3. Make sure your Web Server can handle SSL requests for the URL ALL http requests will be redirected as https.forrajeriaPAV2: tp pav2 asd as asd as fasfjaijiasjifoa as asf asf as afs fas asf afs fsaGoogle Analytics for WinRT: A Windows Store (WinRT) class library for tracking Google Analytics page views, events, and custom variables for your Metro style desktop and tablet apps.huanglitest10312: mvc projectiMan: iMan will be your own port manager, which help to provide the information about all the ports open in your PC It's completely developed in .NET C#InjectionCop: Facilitates secure coding through static code analysis and contract annotations in the Common Language Infrastructure.Master of Olympus: Remake of Master of Olympus : Zeus, a game developed by Impressions Games in 2000.MediaScribe: MediaScribe is a note app for your media.MouseNestDotNet: A small personal website application.Project Estimator ???????? ?? ?????????????? ?? ???????: Project Estimator ? ???????? ??????????? ? ??????????? ?? ????? ? ???????? ????.Projekt grupowy 1: Project created only for school purpose.SecondHandApp: Warenwirtschaftsprogramm für denn SecondHand LädenSimple .NET XML Serialization: .NET's XML serialization using Linq XObject classes EG: XElement in an IXmlSerializable base classStrip Converter: A Very Handy Converter for 2D Games Developers Developer Website: http://www.bluebulk.infoSwitch JS Control (Client Side): Switch JS control is a very light client side library to create switch(es) on web applications or mobile applications.VisaSys: Visa System????????: TODO::????

  Read the article

• Ubuntu Server Cannot Route to the Internet

  - by ejes

  I've been having this problem for weeks now, and I can't seem to figure out the problem. My server can route the local network and serves it well, however it cannot access the internet. It can't be the router because everything else on this lan can route through the router. I've even switched the ethernet port. Any help would be appreciated. I've tried all the usual places, anyway, here are the configs: root@uhs:~# uname -a Linux uhs 3.0.0-16-generic-pae #28-Ubuntu SMP Fri Jan 27 19:24:01 UTC 2012 i686 i686 i386 GNU/Linux root@uhs:~# cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface # auto eth1 # iface eth1 inet dhcp auto eth0 iface eth0 inet static address 192.168.0.3 netmask 255.255.255.0 broadcast 192.168.0.255 gateway 192.168.0.1 root@uhs:~# ping -c 4 192.168.0.1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. 64 bytes from 192.168.0.1: icmp_req=1 ttl=64 time=0.334 ms 64 bytes from 192.168.0.1: icmp_req=2 ttl=64 time=0.339 ms 64 bytes from 192.168.0.1: icmp_req=3 ttl=64 time=0.324 ms 64 bytes from 192.168.0.1: icmp_req=4 ttl=64 time=0.339 ms --- 192.168.0.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2997ms rtt min/avg/max/mdev = 0.324/0.334/0.339/0.006 ms root@uhs:~# ping -c 4 209.85.145.103 PING 209.85.145.103 (209.85.145.103) 56(84) bytes of data. --- 209.85.145.103 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3023ms root@uhs:~# ifconfig eth0 Link encap:Ethernet HWaddr 00:0c:6e:a0:92:6e inet addr:192.168.0.3 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::20c:6eff:fea0:926e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13131114 errors:0 dropped:0 overruns:0 frame:0 TX packets:10540297 errors:0 dropped:0 overruns:5 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3077922794 (3.0 GB) TX bytes:3827489734 (3.8 GB) Interrupt:10 Base address:0xa000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:7721 errors:0 dropped:0 overruns:0 frame:0 TX packets:7721 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:551950 (551.9 KB) TX bytes:551950 (551.9 KB) root@uhs:~# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 100 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 root@uhs:~# # PRETEND Traceroute root@uhs:~# for i in {1..30}; do ping -t $i -c 1 209.85.145.103; done | grep "Time to live exceeded" root@uhs:~#

  Read the article

• How can I dynamically load the correct sprite from a sprite sheet?

  - by Leonard Challis

  I am making a simple card game in unity. The game is based on a standard 52-card pack, with identical backs for unique faces. In my particular game different cards are worth different values and have various special abilities. The game will have 52 cards on the table (on the draw position or in the face-down deck or in someone's hand) at all times, so this number won't change. I thought that making a Card prefab and instantiating 52 of these manually would be a bad idea. Even doing it in code, I thought, would be a bit OTT, and that I should just instantiate visual cards when they are face-up to the player. I have a sprite sheet of the 52 cards and the back, which is imported as a Sprite in multiple mode, sliced in to a grid containing all the cards needed to play the game. The problem I now face is that, through my GameController script I want to generate a shuffled pack of cards, deal some to each player and then show those cards to a player. However, I am not sure of the best way, or even if it's possible, to do this dynamically with the sprite sheets as they are. For instance if I have the following: private CardRank rank; private CardSuite suite; private void Start() { this.rank = CardRank.Ace; this.suite = CardSuite.Spades; } This class would be instantiated by the game manager. I would have 52 of these in code. Whenever I have to visually show a card in the scene, I would use a card prefab, which is essentially a game object with a SpriteRenderer on it. I would need to dynamically load the correct sprite for this object from the spritesheet. The sliced sprites from the sprite sheet actually have names in the format AS (Ace of Spades), 7H (Seven of Hearts), etc - though this was a manual thing I did myself of course. I have also tried various alternative solutions, including creating animations, having separate sprites not in a spritesheet and having an array of available sprites in an array with a specific index for each card, but none seem as elegant as trying to load the correct sprite at runtime, as I'm trying to. So, how do I load a specific sprite from a spritesheet at runtime? I'm open to suggestions, even those that make me think differently about how to approach the problem.

  Read the article

• Hyper-V Live Migration across Sites!

  - by Ryan Roussel

  One of the great sessions I sat in on at Tech Ed this week was stretching a Windows 2008 R2 Hyper-V  Failover Cluster across sites.  With this ability, you could actually implement a Hyper-V cluster where you could migrate or even Live Migrate VMs across sites.   With this area’s propensity for Hurricanes, this will be a very popular topic for me over the next few months. While this technology is possible today, it’s also very complicated and can be very expensive to implement.    First your WAN connection has to support the ability to trunk your VLAN across both sites in order to Live Migrate.  This means you can’t use a Layer 3 routed connection like MPLS.  It has to be a Metro Ethernet connection or "Dark Fiber”.  Dark Fiber is unused Fiber already in the ground that can be leased from  various providers. Both of these connections would allow you to trunk layer 2 across your WAN.  Cisco does have the ability to trunk layer 2 across a routed connection by muxing the traffic but this is only available in their Nexus product line which has a very steep price tag.   If you are stuck with MPLS or the like and Nexus switching is not a realistic possibility, you will have to implement a multi-subnet cluster in which case Live Migration won’t be possible.  However you can still failover VMs to the remote site with some planning and manual intervention.  The consideration here is that the VMs will be on a different subnet once migrated, so you will have to change the IP addressing of your VMs.  This also has ramifications with DNS and Name resolution to control your down time.  DHCP with Reservations for your VMs is the preferred method to achieve the IP changes as this will automate that part of the process.   Secondly, you will have to have  a mechanism to replicate your storage across both sites.  Many SAN vendors natively support hardware based synchronous and asynchronous replication.  Some even support cluster shared volumes which were introduced in 2008 R2.   If your SANs do not support this natively, there are alternative file based replication products either software based like Double Take or hardware appliance like EMC.  Be sure to check with your vendor on the support of Disk majority if you’re replicating your quorum disk between SANs.   The last consideration is the ability to maintain quorum for your cluster.  If your replication provider does not support Disk Majority through replication, you will have to explore Node Majority with File Share Witness.  This will affect your design as a 3 node cluster with 1 node at the remote site and FSW at the production site would not have the ability to maintain quorum if the production site was lost. MS best practice for this would be to implement an even node cluster with 2 nodes at  each site and the FSW at a third site.   And there you have it.  While some considerations and research goes into implementing this solution, even a multi-subnet solution would be invaluable to organizations in the implementations of “warm” DR sites.

  Read the article

• Full disk encryption with seperate boot and encrypted keyfile storage: Two-Form Authentication

  - by Cain

  I am trying to setup true Full Disk encryption with two-form authentication on 12.04 and can not find out how to call a keyfile for the encrypted root out of another encrypted partition. All documentation or questions I am finding for whole or full disk encryption only encrypts separate partitions on the same disk. This is not what most are calling full disk encryption, /boot is not on a partition on the root drive, rather it is on a usb stick as sdx1. Instead root is on a logical partition on top of a LUKS container. Luks is run on the whole disk, encrypting the partition table as well. All drives in the machine are completely encrypted and to open it it requires a USB drive (what I have) as well as a passphrase (what I know) resulting in Two-Form Authentication to boot the machine. Device sdx cryptroot vg00 lvroot / There is no passphrase to open the encrypted root device, only a keyfile. That keyfile is kept on the usb drive with /boot, in its own encrypted partition (I'll call this cryptkey). In order for the root file system (cryptroot) to be opened, initramfs must ask for the passphrase to cryptkey on the usb drive, then use the keyfile inside that to open cryproot. I did manage to find what I think is the how-to I used to do this once before: http://wiki.ubuntu.org.cn/UbuntuHelp:FeistyLUKSTwoFormFactor I already have the system installed and can chroot into it, however, I can not get it to call for the keys on the USB during boot. I did find a how-to saying I needed to make a cryptroot conf for initramfs but, I believe that is for a passphrase: https://help.ubuntu.com/community/EncryptedFilesystemLVMHowto#Notes_for_making_it_work_in_Ubuntu_12.04_.22Precise_Pangolin.22_amd64 I also tried to setup crypttab. However, crypttab only works for drives mounted after the root drive as calling for a keyfile on a device not yet mounted to the system doesnt work. The Feisty how-to included scripts that would be run during boot instructing initramfs to mount the usb drive temporarily and call the keyfile for root which worked quite well except those scripts are outdated now, many of the things they relied on have been merged into something else, changed, or simply don't exist anymore. If I have missed a clear how-to for this, that would be wonderful, I just don't think I have.

  Read the article

• Why does my Messaging Menu code not work when split into functions?

  - by fluteflute

  Below are two python programs. They're exactly the same, except for one is split into two functions. However only the one that's split into two functions doesn't work - the second function doesn't work. Why would this be? Note the code is taken from this useful blog post. Without functions (works): import gtk def show_window_function(x, y): print x print y # get the indicate module, which does all the work import indicate # Create a server item mm = indicate.indicate_server_ref_default() # If someone clicks your server item in the MM, fire the server-display signal mm.connect("server-display", show_window_function) # Set the type of messages that your item uses. It's not at all clear which types # you're allowed to use, here. mm.set_type("message.im") # You must specify a .desktop file: this is where the MM gets the name of your # app from. mm.set_desktop_file("/usr/share/applications/nautilus.desktop") # Show the item in the MM. mm.show() # Create a source item mm_source = indicate.Indicator() # Again, it's not clear which subtypes you are allowed to use here. mm_source.set_property("subtype", "im") # "Sender" is the text that appears in the source item in the MM mm_source.set_property("sender", "Unread") # If someone clicks this source item in the MM, fire the user-display signal mm_source.connect("user-display", show_window_function) # Light up the messaging menu so that people know something has changed mm_source.set_property("draw-attention", "true") # Set the count of messages in this source. mm_source.set_property("count", "15") # If you prefer, you can set the time of the last message from this source, # rather than the count. (You can't set both.) This means that instead of a # message count, the MM will show "2m" or similar for the time since this # message arrived. # mm_source.set_property_time("time", time.time()) mm_source.show() gtk.mainloop() With functions (second function is executed but doesn't actually work): import gtk def show_window_function(x, y): print x print y # get the indicate module, which does all the work import indicate def function1(): # Create a server item mm = indicate.indicate_server_ref_default() # If someone clicks your server item in the MM, fire the server-display signal mm.connect("server-display", show_window_function) # Set the type of messages that your item uses. It's not at all clear which types # you're allowed to use, here. mm.set_type("message.im") # You must specify a .desktop file: this is where the MM gets the name of your # app from. mm.set_desktop_file("/usr/share/applications/nautilus.desktop") # Show the item in the MM. mm.show() def function2(): # Create a source item mm_source = indicate.Indicator() # Again, it's not clear which subtypes you are allowed to use here. mm_source.set_property("subtype", "im") # "Sender" is the text that appears in the source item in the MM mm_source.set_property("sender", "Unread") # If someone clicks this source item in the MM, fire the user-display signal mm_source.connect("user-display", show_window_function) # Light up the messaging menu so that people know something has changed mm_source.set_property("draw-attention", "true") # Set the count of messages in this source. mm_source.set_property("count", "15") # If you prefer, you can set the time of the last message from this source, # rather than the count. (You can't set both.) This means that instead of a # message count, the MM will show "2m" or similar for the time since this # message arrived. # mm_source.set_property_time("time", time.time()) mm_source.show() function1() function2() gtk.mainloop()

  Read the article

• Random thoughts on Monday

  - by user10760339

  I know that it has been a long time since my last post, just though that I would update you my latest thoughts of Governance. I just recently completed an executive round table series on EA and Cloud in Singapore, Indonesia and Malaysia. The response was phenomenal. The key point of the session was that Enterprise is the key enabler of innovation - All companies want to drive to be market leaders, EA can lay the foundation for the path to deliver that at innovation. When it comes to innovation, I see two distinct types: (a) Passive innovation is where a company creates innovation thought increments improvement over time. A great example is when airlines went from paper tickets to electronic ticket. Next logical progression is to do the same with boarding passes. There are a lot of examples to choose from, thought the thing to keep in mind, is that passive innovation will only keep you in the lead, it won’t allow you to create new markets or jump from #3 to #1 in one go. For that we need another type of innovation. (b) Disruptive innovation is where you create market where none existed before. Thought very difficult to do and requires significant investment in research, product and software development and not least of all, visionary thinking and timing, if done correctly, can turn the world on it’s ear. A great example is Apple iTunes. Some might say that this is incremental innovation, but only in one aspect, the downloading of music. Other then that, it’s all disruptive innovation. Being able to buy a single song rather then the album fundamentally changed the way we get out music. Behind all of these types of innovation is Enterprise Architecture. EA creates the infrastructure foundation, then delivery systems and the end-user experience to deliver this innovation. At Oracle, we are driving that EA innovation with our private cloud offerings from “bolt-to-glass” as I like to say. For more on what Oracle has to offer in EA and cloud, have a look at Cloud Computing | Oracle and Enterprise Architecture - OracleI am working on new material that I will be posting in a couple of weeks, so check back regularly for new updates or feel free to subscript for updates.

  Read the article

• Elo system behaves oddly in program I've created

  - by adc

  Alright, so I'm looking to build a small program (C# and XAML) that, essentially, does this: Generate array of players. Each player has a current rating and a true rating. I set current rating to 1200 as a starting point right now; I've also tried setting it to true rating and the average of the two. True rating is what their skill level actually is. Their true rating is calculated based on percentages from the current League of Legends rating system; generating an array of 970 thousand generates results very similar to the data from here: (removed due to URL limit - but trust me, the results are very similar). This array is of length specified by the user. If need be, sort the array from smallest to largest. Play X number of games, again specified by the user. This is done by taking the array of players (which is sorted by Current Rating after being created) and running through it in groups of 10. The first five are on team one, the second five are on team two. It then takes the True Rating of these players and calculates an expected chance to win using the Elo system. It generates a random double and compares it to the expected chance to win; if the number is lower, team one wins - otherwise team two wins. I then update the rating of the players via, again, the Elo system - giving the winning team a score of 1 and the losing team a score of 0. I use a K value of 36 (but have tried 12, 24, and even higher ones) and an F value of 400. After going through the entire loop of players (which I have conveniently forced to be a multiple of ten), it sorts the array - again via current rating. This, if my understanding of the Elo system is correct, runs properly. However, it doesn't seem to work. I have a running test telling me how many players of the full array are within 100 current rating of their true rating. I would expect some portion of the population to be outside this range (as probability is not always going to go in their favor), but a full 40-45% of the population is outside of this range. I also have it outputting the maximum difference between true and current rating - and I have never seen this drop below 500! It hovers between 550-600, occasionally going over or under. I'm at a loss as to what to change - I've fiddled with the K and F values, where I start all the players, etc. but nothing changes the fact that eventually a good 40% of the population is outside the range. And it isn't that I have it playing too few games - it's now run through over 60 thousand games and the problem never disappears or really fluctuates. The full C# code, including everything except the XAML file and the Player class (pastebin is being very slow and I can only post two links, so I can't link to the XAML file): http://pastebin.com/rFcZRL84 The Player class: http://pastebin.com/4cJTdTRu I guess my question is did I do anything wrong? Is there a problem with the way I implemented the system, or is it just that Riot uses a significantly modified Elo system? I don't think it's the latter, as that still wouldn't explain the massive true and current rating differences to me, however.

  Read the article

• Correct way to handle path-finding collision matrix

  - by Xander Lamkins

  Here is an example of me utilizing path finding. The red grid represents the grid utilized by my A* library to locate a distance. This picture is only an example, currently it is all calculated on the 1x1 pixel level (pretty darn laggy). I want to make it so that the farther I click, the less accurate it will be (split the map into larger grid pieces). Edit: as mentioned by Eric, this is not a required game mechanic. I am perfectly fine with any method that allows me to make this accurate while still fast. This isn't the really the topic of this question though. The problem I have is, my current library uses a two dimensional grid of integers. The higher the number in a cell, the more resistance for that grid tile. Currently I'm setting all unwalkable spots to Integer Max. Here is an example of what I want: I'm just not sure how I should set up the arrays of integers of the grid. Every time an element is added/removed to/from the game, it's collision details are updated in the table. Here is a picture of what the map looks like on my collision layer: I probably shouldn't be creating new arrays every time I have to do a path find because my game needs to support tons of PF at the same time. Should I have multiple arrays that are all updated when the dynamic elements are updated (a building is built/a building is destroyed). The problem I see with this is that it will probably make the creation and destruction of buildings a little more laggy than I would want because it would be setting the collision grid for each built in accuracy level. I would also have to add more/remove some arrays if I ever in the future changed the map size. Should I generate the new array based on an accuracy value every time I need to PF? The problem I see with this is that it will probably make any form of PF just as laggy because it will have to search through a MapWidth x MapHeight number of cells to shrink it all down. Or is there a better way? I'm certainly not the best at optimizing really anything. I've just started dealing with XNA so I'm not used to having optimization code really doing much of an affect until now... :( If you need code examples, please ask. I'll add it as an edit. EDIT: While this doesn't directly relate to the question, I figure the more information I provide, the better. To keep your units from moving as accurately to the players desired position, I've decided that once the unit PFs over to the less accurate grid piece, it will then PF on a more accurate level to the exact position requested.

  Read the article

• Sparse virtual machine disk image resizing weirdness?

  - by Matt H

  I have a partitioned virtual machine disk image created by vmware. What I want to do is resize that by 10GB. The file size is showing as 64424509440. Or 60GB. So I ran this: dd if=/dev/zero of=./win7.img seek=146800640 count=0 It ran without errors and I can verify the new size is in fact 75161927680 bytes or 70GB. This is where it gets a little odd. I started the guest domain in xen which is a Windows 7 enterprise machine. What I was expecting to see in diskmgmt.msc is 2 partitions. 1 system partition at the start of around 100MB and near 60GB partition (which is C drive) followed by around 10GB of free space. Actually what I saw was a 70GB partition!?! That confused me... so I decided to run the Check Disk which when you set it on the C drive it asks you to reboot so it'll run on boot. So I did that and during the boot it ran the checks. It got all the way through stage 3 and didn't show any errors at all. Looked at the partitions in disk manager and now C drive has shrunk back to 60GB and there is no free space. What gives? Ok, I thought I'd try mounting it under Dom0 and examining it with fdisk. This is what I get when mounted sudo xl block-attach 0 tap:aio:/home/xen/vms/otoy_v1202-xen.img xvda w sudo fdisk -l /dev/xvda Disk /dev/xvda: 64.4 GB, 64424509440 bytes 255 heads, 63 sectors/track, 7832 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x582dfc96 Device Boot Start End Blocks Id System /dev/xvda1 * 1 13 102400 7 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/xvda2 13 7833 62810112 7 HPFS/NTFS Note the cylinder boundary comment. When I run sudo cfdisk /dev/xvda I get: FATAL ERROR: Bad primary partition 1: Partition ends in the final partial cylinder Press any key to exit cfdisk So I guess this is a bigger problem than first thought. How can I fix this? EDIT: Oops, the cylinder boundary thing is not a problem at all since disks have used LBA etc. So that threw me for a moment... still the problem exists... Now this output looks a little different. sudo sfdisk -uS -l /dev/xvda Disk /dev/xvda: 7832 cylinders, 255 heads, 63 sectors/track Units = sectors of 512 bytes, counting from 0 Device Boot Start End #sectors Id System /dev/xvda1 * 2048 206847 204800 7 HPFS/NTFS /dev/xvda2 206848 125827071 125620224 7 HPFS/NTFS /dev/xvda3 0 - 0 0 Empty /dev/xvda4 0 - 0 0 Empty BTW: I do have a backup of the image so if you help me mess it up that's ok. EDIT: sudo parted /dev/xvda print free Model: Xen Virtual Block Device (xvd) Disk /dev/xvda: 64.4GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 32.3kB 1049kB 1016kB Free Space 1 1049kB 106MB 105MB primary ntfs boot 2 106MB 64.4GB 64.3GB primary ntfs 64.4GB 64.4GB 1049kB Free Space Cool. Linux is showing free space is 10GB which is what I expect. The problem is windows isn't seeing this?

  Read the article

• WebLogic Partner Community Newsletter May 2014

  - by JuergenKress

  Dear WebLogic Partner Community member, Registration for the Fusion Middleware Summer Camps 2014 is open – Register asap for one of our bootcamps August 4th – 8th 2014 in Lisbon. Please read details and pre-requisitions careful before you register. We expect that like in the past, the conference will be booked out soon! Thanks to you our WebLogic Specialized Partners Oracle is #1 for Worldwide Market-Share Total Software Revenue in the Application Platform Market Segment for 2013. Want to know why, get the new recipes for Oracle WebLogic 12.1.2. Looking for the right server to run WebLogic – try WebLogic on Oracle Database Appliance 2.9. Want to install WebLogic - Play around with WebLogic Maven Plug-In. Thanks for sharing all the additional WebLogic articles within the community: How to use NodeManager to control WebLogic Servers & Retrieving WebLogic Server Name and Port in ADF Application & Glassfish to WebLogic Migration & Advanced GPIO & Building Robots with Java Embedded & Quick & Dirty How-to Guide: Install GlassFish 4 on Raspberry Pi & New Release: Java Micro Edition (ME) 8. In our Development tool section Frank published Development - Performance and Tuning - Overview in the latest ADF Architecture TV channel. Many of our clients run forms applications, make sure you run it on WebLogic. Thanks for sharing all the additional development tool articles within the community: Using Oracle WebLogic 12c with NetBeans IDE & Consuming SOAP Service & Check Box Support in ADF Query & New release of the ADF EMG Audit Rules & Working with the Array Data Type in a Table & ADF client-side architecture - Select All & Book Review: NetBeans Platform for Beginners See you in Lisbon! To read the complete newsletter please visit http://tinyurl.com/WebLogicNewsMay2014 (OPN Account required) To become a member of the WebLogic Partner Community please register at http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: WebLogic Community newsletter,newsletter,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

  Read the article

• RewriteRule not working for certain URLs

  - by keiki

  There are a few domains pointing towards the same server, and of course I need them all redirect to only one of them. Redirects work, but only for certain URLs. What works: http://www.domain.com, http://domain.com, domain.com/index.html, domain.com/index.php, , domain.com/nonExistentDirectory, and if I click in the menu the following URLs are also redirected correctly: domain.com/foo/bar, domain.com/foo/bar.html or .php or other extension. What doesn't work: domain.com/existentDirectory, domain.com/foo/bar (if I type the URL in the address bar). If anyone will have the time and skill and will to tell me where's the mistake, I'll be deeply grateful. Here's my .htaccess file: AddHandler x-httpd-php .html .htm <ifModule mod_gzip.c> mod_gzip_on Yes mod_gzip_dechunk Yes mod_gzip_item_include file \.(html?|txt|css|js|php|pl)$ mod_gzip_item_include handler ^cgi-script$ mod_gzip_item_include mime ^text/.* mod_gzip_item_include mime ^application/x-javascript.* mod_gzip_item_exclude mime ^image/.* mod_gzip_item_exclude rspheader ^Content-Encoding:.*gzip.* </ifModule> <ifModule mod_expires.c> ExpiresActive On ExpiresDefault "access plus 1 seconds" ExpiresByType text/html "access plus 1 seconds" ExpiresByType image/gif "access plus 2592000 seconds" ExpiresByType image/jpeg "access plus 2592000 seconds" ExpiresByType image/png "access plus 2592000 seconds" ExpiresByType text/css "access plus 2592000 seconds" ExpiresByType text/javascript "access plus 216000 seconds" ExpiresByType application/x-javascript "access plus 216000 seconds" </ifModule> <ifModule mod_headers.c> <filesMatch "\\.(ico|pdf|flv|jpg|jpeg|png|gif|swf)$"> Header set Cache-Control "max-age=2592000, public" </filesMatch> <filesMatch "\\.(css)$"> Header set Cache-Control "max-age=2592000, public" </filesMatch> <filesMatch "\\.(js)$"> Header set Cache-Control "max-age=216000, private" </filesMatch> <filesMatch "\\.(xml|txt)$"> Header set Cache-Control "max-age=216000, public, must-revalidate" </filesMatch> <filesMatch "\\.(html|htm|php)$"> Header set Cache-Control "max-age=1, private, must-revalidate" </filesMatch> </ifModule> <ifModule mod_headers.c> Header unset ETag </ifModule> FileETag None <ifModule mod_headers.c> Header unset Last-Modified </ifModule> # BEGIN WordPress <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /index.php [L] </IfModule> # END WordPress RewriteCond %{HTTP_HOST} ^foo\.com$ [OR] RewriteCond %{HTTP_HOST} ^www\.foo\.com$ RewriteRule (.*) http://domain.com/$1 [R=301,L,QSA] RewriteCond %{HTTP_HOST} ^foo1\.com$ [OR] RewriteCond %{HTTP_HOST} ^www\.foo1\.com$ RewriteRule (.*) http://domain.com/$1 [R=301,L,QSA] RewriteCond %{HTTP_HOST} ^foo2\.com$ [OR] RewriteCond %{HTTP_HOST} ^www\.foo2\.com$ RewriteRule (.*) http://domain.com/$1 [R=301,L,QSA] RewriteCond %{HTTP_HOST} ^foo3\.com$ [OR] RewriteCond %{HTTP_HOST} ^www\.foo3\.com$ RewriteRule (.*) http://domain.com/$1 [R=301,L,QSA] RewriteCond %{HTTP_HOST} ^foo8\.com$ [OR] RewriteCond %{HTTP_HOST} ^www\.foo8\.com$ RewriteRule (.*) http://domain.com/$1 [R=301,L,QSA] Thinking that the above version was overkill, I've also tried to redirect all the requests for domains different than the main on to be redirected to it like this: RewriteCond %{HTTP_HOST} !^domain\.com$ [NC] RewriteRule ^(.*)$ http://domain.com [L,R=301] Is it also wrong? Because it doesn't work either! P.S. @Sodved I've tried that and it doesn't help (I comment here because I can't seem to be able to comment your answer.) Removing the following piece of code didn't solve the issue either, so the problem must be somewhere else: # BEGIN WordPress <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /index.php [L] </IfModule> # END WordPress New details: using this tool for checking the redirects I got the following results for the URLs that are not redirected: Checked link: http://domain.com/aDirectory/ Type of link: direct link (note the trailing slash above) and: Checked link: http://domain.com/aDirectory Type of redirect: 301 Moved Permanently Redirected to: http://domain.com/aDirectory/ (no trailing slash here) I hope/suspect I'm getting closer to the cause of this behavior.

  Read the article

• SO-Aware Service Explorer – Configure and Export your services from VS 2010 into the repository

  - by cibrax

  We have introduced a new Visual Studio tool called “Service Explorer” as part of the new SO-Aware SDK version 1.3 to help developers to configure and export any regular WCF service into the SO-Aware service repository. This new tool is a regular Visual Studio Tool Window that can be opened from “View –> Other Windows –> Services Explorer”. Once you open the Services Explorer, you will able to see all the available WCF services in the Visual Studio Solution. In the image above, you can see that a “HelloWorld” service was found in the solution and listed under the Tool window on the left. There are two things you can do for a new service in tool, you can either export it to SO-Aware repository or associate it to an existing service version in the repository. Exporting the service to SO-Aware means that you want to create a new service version in the repository and associate the WCF service WSDL to that version. Associating the service means that you want to use a version already created in SO-Aware with the only purpose of managing and centralizing the service configuration in SO-Aware. The option for exporting a service will popup a dialog like the one bellow in which you can enter some basic information about the service version you want to create and the repository location. The option for associating a service will popup a dialog in which you can pick any existing service version repository and the application configuration file that you want to keep in sync for the service configuration. Two options are available for configuring a service, WCF Configuration or SO-Aware. The WCF Configuration option just tells the tool that the service will use the standard WCF configuration section “system.serviceModel” but that section must be updated and kept in sync with the configuration selected for the service in the repository. The SO-Aware configuration option will tell the tool that the service configuration will be resolved at runtime from the repository. For example, selecting SO-Aware will generate the following configuration in the selected application configuration file, <configuration> <configSections> <section name="serviceRepository" type="Tellago.ServiceModel.Governance.ServiceConfiguration.ServiceRepositoryConfigurationSection, Tellago.ServiceModel.Governance.ServiceConfiguration" /> </configSections> <serviceRepository url="http://localhost/soaware/servicerepository.svc"> <services> <service name="ref:HelloWorldService(1.0)@dev" type="SOAwareSampleService.HelloWorldService" /> </services> </serviceRepository> </configuration> As you can see the tool represents a great addition to the toolset that any developer can use to manage and centralize configuration for WCF services. In addition, it can be combined with other useful tools like WSCF.Blue (Web Service Contract First) for generating the service artifacts like schemas, service code or the service WSDL itself.

  Read the article

• Single page not appearing in Google Search

  - by Dan

  Description I have a static franchise website which has various sub pages each dedicated to an individual franchisee. For each franchisee the page, the only thing slightly similar between all of them are the page titles, they follow this structure: <title> Welcome to THE_COMPANY - PRODUCT_DESCRIPTION Services, THE_LOCATION </title> THE_COMPANY and PRODUCT_DESCRIPTION are the same across all franchisees, however THE_LOCATION changes depeding on where they are located in the UK. Each franchisee page has the following <meta /> tags: <meta name="DC.creator" content="user"/> <meta name="DC.format" content="text/html"/> <meta name="DC.language" content="en"/> <meta name="DC.date.modified" content="2014-01-23T11:22:31+00:00"/> <meta name="DC.date.created" content="2014-01-23T11:22:09+00:00"/> <meta name="DC.type" content="Page"/> <meta name="DC.distribution" content="Global"/> <meta name="robots" content="ALL"/> <meta name="distribution" content="Global"/> The main content on each franchisee page is completely different. The Problem There is one particular franchisee page, located in Area A.. Which will not appear in Google Search results at all. However every single other franchisee (if you Google Search for "THE_COMPANY, THE_LOCATION" is number 1). And if I do the same search on Bing, Yahoo or DuckDuckGo, the Area A franchisee is the first result on all of them. Has Google for some reason black listed one page on the site? What I Have Tried Ensuring the page is referenced in my sitemap.xml file 'Fetching as Google Bot' the link www.the_company.co.uk/areaa When that came back as OK I would submit to index Resubmitting the sitemap.xml file in Webmaster Tools Linking to the Area A page from another pages content For this I also waited about 3 weeks before checking again to give Google time to re-index Making a change to the page content and waiting another 2 / 3 weeks Removing the page completely and recreating it with an alternative URL The closest thing I have found to this issue is this StackOverflow question but this particular franchisee has existed for almost a year, it used to appear on Google searches however no longer does. I'm guessing the Panda update wasn't too happy with something on the page, but it hasn't effected anything else on the site and I am at a loss for things to try. I would greatly appreciate any information or thoughts as to what could have caused this Thanks. Update In line with Daniel Fukudas answer below, I have followed some of his steps but everything seems to check out alright: HTTP Headers HTTP/1.1 200 OK => Date => Tue, 25 Feb 2014 16:31:29 GMT Server => Zope/(2.12.16, python 2.6.6, linux2) ZServer/1.1 Content-Length => 40078 Expires => Sat, 01 Jan 2000 00:00:00 GMT Content-Type => text/html;charset=utf-8 Content-Language => en Vary => Accept-Encoding Connection => close Robots <meta /> tag: <meta name="robots" content="ALL"/> I have updated this <meta /> tag to read content="INDEX" instead now. robots.txt: User-agent: * Disallow: User-Agent: Googlebot Disallow: /*sendto_form$ Disallow: /*folder_factories$ Using site:THE_COMPANY.co.uk: Searching for 'AREA A site:THE_COMPANY.co.uk' does not return the page, but regardless of that searching just for site:THE_COMPANY.co.uk will not necessarily return every indexed page, or so I understand... Update It appears Google likes to drop pages every now and then from the index, despite my steps above, I left the site alone and the page appeared back in the SERPs by itself.

  Read the article

• Migrating a WebLogic Domain from a 32 to a 64 bit JVM/Architecture

  - by adejuanc

  Currently on 32 bit OS which presents a physical constraint when trying to allocate memory. By limit, a 32 bit OS, will not be able to allocate more than 3 GB on a Linux environment, or 2 GB for Windows environment (not considering Physical Address Extension (PAE) implementation, which can increase the maximum allocatable memory). When this limit is reached, a migration to a 64 bit architecture is recommended. Below are the steps on how to install a 64 WebLogic Server version, along with a 64 Bit JVM and then how to migrate the domain to this new environment. Weblogic Server Version: WebLogic Server Version: 10.3.4.0 OS: Linux adejuan-cl.cl.oracle.com 2.6.18-194.el5 #1 SMP Mon Jan 01 22:10:29 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux JVM:java version "1.6.0_22" Java(TM) SE Runtime Environment (build 1.6.0_22-b04) Oracle JRockit(R) (build R28.1.1-13-139783-1.6.0_22-20101206-0136-linux-x86_64, compiled mode) To create migration template: 1. Execute $<WLS_HOME>/wlserver_10.3/common/bin/config_builder.sh 2. Create Domain Template. 3. Select Domain to migrate. 4. Enter the name of template and other info. Click next. 5. Using Add Button, Select libraries you want to add under lib folder. copy jdbc data sources you would like to have under config/jdbc folder. If you want to have log4j configuration, copy log4j.xml under domain_root folder. 6. Select data base for the domain and click next. 7. Enter Admin Server Name and port numbers. Click next. 8. Enter username and password. Click next. Select No if you don want to add users/groups/roles 9. Click next until reach button create. This will create a jar file that is needed for the next action plan. To install and migrate domain to 64 bit architecture. 1. Install JVM Jrockit R28.1.1.13 on environment. (uncompress zip folder on a known location) 2. Go to JRockit_Home/bin and execute $ java -d64 -jar wls1034_generic.jar 3. When prompt, select JRockit JVM in browse menu, and wait for installation to finish. 4. Go to <WLS_HOME>/wlserver_10.3/common/bin and execute $ ./config.sh 5. Select Create a new Weblogic domain 6. Select Base this domain on an existing template and select browse. 7. Select jar file created on previous action plan. 8. Select Name of domain. Maintain in most cases. 9. Select user name and password. Maintain in most cases. 10. Select Jrockit SDK 1.6.0_22 and click next. 11. Confirm all JMS/JDBC/security configuration. 12. On select Optional Configuration, reconfigure if necessary. 13. Check on Configuration summary for all domain configuration. 14. Click on create, to finish up domain import. Note: Always when installing a 64 bit WLS, it's necessary to install first the 64 JVM and then run the generic installer with the -d64 bit option. If this is not performed, the installation will be the 32 default version. For more information, please refer: http://download.oracle.com/docs/cd/E13188_01/jrockit/docs50/dev_faq.html#pae

  Read the article

• UPOS RFIDScanner data format

  - by Robert Snyder

  A lot of work that I do currently is based in the OPOS/UPOS world. My company has a device that can read 13.56Mhz tags (RFID), Smart Cards, and Mag Stripe cards. Up until somewhat recently I have only been working with RFID for a very specific scenario. That was to read UltraLight C and Desfire cards. These cards were all setup very specifically so that I could take the data read from those cards and force it into a MSR track2 format. The past couple of weeks, however, I have been working on reading RFID credit cards (since I have a Visa card I've been using mine), and Smart Card credit cards. (The visa card I have has both) In learning how to communicate with SmartCard and reading ISO7816 and EMVCO documents I became a little more familiar with how info is stored. But now I have a question regarding UPOS. The RFID data on my Visa is stored (and read) very similar to how the data is stored and read from the Smart Card on my Visa. Cool. Well in the UPOS spec for SmartCardRW the ReadData method returns a byte array. That's cool, I can just return all that data and then parse it as my heart desires. The RFID though has a LinkedList of Tags. Well this makes sense in terms of my Visa card (reminds me of a question I have in regards to SmartCard, but that is for another question) but what about ULC and Desfire, or for that matter any Mifare card. Pages, Files, Purses don't exactly fit the Tag profile. For instance lets just say I read pages 4-12 on my ULC card. Each page I read is 4 bytes long. Does this mean I have 9 tags in my LinkedList? Is my Tag id the page number? Or then how does that translate to Desfire? I open application 123456 and read file 1 and file 2, Do I have 2 tags? and if so what is my tag id? At least with my Visa I think that I have to use the Tag id (ex 5F24 for my expiration date) and value of {0x15, 0x10, 0x31} Part of me says yes..that makes sense. Another part of me says, "well if that is the case then why doesn't SmartCardRW have Tags?" So that is my question. How do I format my data from those different types of media? or is that the job of my Control Object (the application)? Is so how does it know? The only protocols I have are: // Summary: // Enumerates the available predefined RFID tag protocols the device supports. [Flags] public enum RFIDProtocols { EpcClass0 = 1, RFIDSdt0Plus = 2, EpcClass1 = 4, EpcClass1Gen2 = 8, EpcClass2 = 16, Iso14443A = 4096, Iso14443B = 8192, Iso15693 = 12288, Iso180006B = 16384, Other = 16777216, All = 1073741824, } If I use that well all of my cards that I have are all Iso14443A. I use the ATQA and the SAK to know what type of card I really have. There is no RFID property that lets me specify that. So I'm lost.

  Read the article

• SharePoint 2010 Hosting :: How to Create an External Content Type SharePoint 2010

  - by mbridge

  In this simple Article trying to show how SharePoint Designer 2010 more the External Content Type to External Database are very easy to create and can be integrated with our SharePoint Portals. You can download SharePoint Designer 2010 here: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=d88a1505-849b-4587-b854-a7054ee28d66&displaylang=en For this Example I will create a Database in SQL Server and will use SharePoint Designer 2010 to create the connections and use as a mirror from our SharePoint Portal using List and the Database. The first thing we need to do, is connect to SQL Server and create our Database call “Contacts” and add the Table “Contact” with the following fields.  When we create the External Content Type. We  will need to associate the Content Type, in this case i am using the Generic List, then we can create the Connection to the external Data Source. After create the Connection to the Database we can define what Columns we will use and what operations we will add our custom List. For this example i select all Operation they came default. This operation are very important because the Business rules are defined in each operation. After we create the diferent operations we can create the Custom List and define the how will be the Operation and add the Name for our custom List.  If you try to access the New Custom List Call “Custom Contact” you will see we will not have access to the Business Data Connectivity. To Resolve this issue we will need to give Access and permissions to users to the Custom External Content Type BDC connection in the Central administration.  Access to Central Administration Page and select the option “Service Application Tab> Manage Service Application”. There you select the Service “Business Data Connectivity Service” then select “Manage”.  This Option will list all External Content Type, choose the External Content Type we create and select the option “Set Object Permission”, this option will allow to add users to the BDC and manage the permissions to the Custom List.  After the correct permissions are given we can Access to Data on our custom Contact List and start creating new Item and all the other options and operation we define to the same List.  Hope you like this litle Article about connect Database Content to SharePoint Portal using the Externa Content Types and BCS.Thank you.

  Read the article

• Restoring MSDB

  - by David-Betteridge

  We recently performed a disaster recovery exercise which included the restoration of the MSDB database onto our DR server.  I did a quick google to see if there were any special considerations and found the following MS article.  Considerations for Restoring the model and msdb Databases (http://msdn.microsoft.com/en-us/library/ms190749(v=sql.105).aspx).   It said both the original and replacement servers must be on the same version,  I double-checked and in my case they are both SQL Server 2008 R2 SP1 (10.50.2500).. So I went ahead and stopped SQL Server agent, restored the database and restarted the agent.  Checked the jobs and they were all there, everything looked great, and was until the server was rebooted a few days later.Then the syspolicy_purge_history job started failing on the 3rd step with the error message “Unable to start execution of step 3 (reason: The PowerShell subsystem failed to load [see the SQLAGENT.OUT file for details]; The job has been suspended). The step failed.”   A bit more googling pointed me to the msdb.dbo.syssubsystems table SELECT * FROM msdb.dbo.syssubsystems WHERE start_entry_point ='PowerShellStart'   And in particular the value for the subsystem_dll. It still had the path to the SQLPOWERSHELLSS.DLL but on the old server. The DR instance has a different name to the live instance and so the paths are different.   This was quickly fixed with the following SQL Use msdb; GO sp_configure 'allow updates', 1 ; RECONFIGURE WITH OVERRIDE ; GO UPDATE msdb.dbo.syssubsystems SET subsystem_dll='C:\Program Files\Microsoft SQL Server\MSSQL10_50.DR\MSSQL\binn\SQLPOWERSHELLSS.DLL' WHERE start_entry_point ='PowerShellStart'; GO sp_configure 'allow updates', 0; RECONFIGURE WITH OVERRIDE ; GO Stopped and started SQL Server agent and now the job completes.   I then wondered if anything else might be broken, SELECT subsystem_dll FROM msdb.dbo.syssubsystems Shows a further 10 wrong paths – fortunately for parts of SQL (replication, SSIS etc) we aren’t using! Lessons Learnt 1.       DR exercises are a good thing! 2.       Keep the Live and DR environments as similar as possible.    

  Read the article

• The Raspberry Pi JavaFX In-Car System (Part 3)

  - by speakjava

  Ras Pi car pt3 Having established communication between a laptop and the ELM327 it's now time to bring in the Raspberry Pi. One of the nice things about the Raspberry Pi is the simplicity of it's power supply.  All we need is 5V at about 700mA, which in a car is as simple as using a USB cigarette lighter adapter (which is handily rated at 1A).  My car has two cigarette lighter sockets (despite being specified with the non-smoking package and therefore no actual cigarette lighter): one in the centre console and one in the rear load area.  This was convenient as my idea is to mount the Raspberry Pi in the back to minimise the disruption to the very clean design of the Audi interior. The first task was to get the Raspberry Pi to communicate using Wi-Fi with the ELM 327.  Initially I tried a cheap Wi-Fi dongle from Amazon, but I could not get this working with my home Wi-Fi network since it just would not handle the WPA security no matter what I did.  I upgraded to a Wi Pi from Farnell and this works very well. The ELM327 uses Ad-Hoc networking, which is point to point communication.  Rather than using a wireless router each connecting device has its own assigned IP address (which needs to be on the same subnet) and uses the same ESSID.  The settings of the ELM327 are fixed to an IP address of 192.168.0.10 and useing the ESSID, "Wifi327".  To configure Raspbian Linux to use these settings we need to modify the /etc/network/interfaces file.  After some searching of the web and a few false starts here's the settings I came up with: auto lo eth0 wlan0 iface lo inet loopback iface eth0 inet static     address 10.0.0.13     gateway 10.0.0.254     netmask 255.255.255.0 iface wlan0 inet static     address 192.168.0.1     netmask 255.255.255.0     wireless-essid Wifi327     wireless-mode ad-ho0 After rebooting, iwconfig wlan0 reported that the Wi-Fi settings were correct.  However, ifconfig showed no assigned IP address.  If I configured the IP address manually using ifconfig wlan0 192.168.0.1 netmask 255.255.255.0 then everything was fine and I was able to happily ping the IP address of the ELM327.  I tried numerous variations on the interfaces file, but nothing I did would get me an IP address on wlan0 when the machine booted.  Eventually I decided that this was a pointless thing to spend more time on and so I put a script in /etc/init.d and registered it with update-rc.d.  All the script does (currently) is execute the ifconfig line and now, having installed the telnet package I am able to telnet to the ELM327 via the Raspberry Pi.  Not nice, but it works. Here's a picture of the Raspberry Pi in the car for testing In the next part we'll look at running the Java code on the Raspberry Pi to collect data from the car systems.

  Read the article

• EM12c: Using the LIST verb in emcli

  - by SubinDaniVarughese

  Many of us who use EM CLI to write scripts and automate our daily tasks should not miss out on the new list verb released with Oracle Enterprise Manager 12.1.0.3.0. The combination of list and Jython based scripting support in EM CLI makes it easier to achieve automation for complex tasks with just a few lines of code. Before I jump into a script, let me highlight the key attributes of the list verb and why it’s simply excellent! 1. Multiple resources under a single verb:A resource can be set of users or targets, etc. Using the list verb, you can retrieve information about a resource from the repository database.Here is an example which retrieves the list of administrators within EM.Standard mode$ emcli list -resource="Administrators" Interactive modeemcli>list(resource="Administrators")The output will be the same as standard mode.Standard mode$ emcli @myAdmin.pyEnter password :  ******The output will be the same as standard mode.Contents of myAdmin.py scriptlogin()print list(resource="Administrators",jsonout=False).out()To get a list of all available resources use$ emcli list -helpWith every release of EM, more resources are being added to the list verb. If you have a resource which you feel would be valuable then go ahead and contact Oracle Support to log an enhancement request with product development. Be sure to say how the resource is going to help improve your daily tasks. 2. Consistent Formatting:It is possible to format the output of any resource consistently using these options:  –column  This option is used to specify which columns should be shown in the output. Here is an example which shows the list of administrators and their account status$ emcli list -resource="Administrators" -columns="USER_NAME,REPOS_ACCOUNT_STATUS" To get a list of columns in a resource use:$ emcli list -resource="Administrators" -help You can also specify the width of the each column. For example, here the column width of user_type is set to 20 and department to 30. $ emcli list -resource=Administrators -columns="USER_NAME,USER_TYPE:20,COST_CENTER,CONTACT,DEPARTMENT:30"This is useful if your terminal is too small or you need to fine tune a list of specific columns for your quick use or improved readability.  –colsize  This option is used to resize column widths.Here is the same example as above, but using -colsize to define the width of user_type to 20 and department to 30.$ emcli list -resource=Administrators -columns="USER_NAME,USER_TYPE,COST_CENTER,CONTACT,DEPARTMENT" -colsize="USER_TYPE:20,DEPARTMENT:30" The existing standard EMCLI formatting options are also available in list verb. They are: -format="name:pretty" | -format="name:script” | -format="name:csv" | -noheader | -scriptThere are so many uses depending on your needs. Have a look at the resources and columns in each resource. Refer to the EMCLI book in EM documentation for more information.3. Search:Using the -search option in the list verb makes it is possible to search for a specific row in a specific column within a resource. This is similar to the sqlplus where clause. The following operators are supported:           =           !=           >           <           >=           <=           like           is (Must be followed by null or not null)Here is an example which searches for all EM administrators in the marketing department located in the USA.$emcli list -resource="Administrators" -search="DEPARTMENT ='Marketing'" -search="LOCATION='USA'" Here is another example which shows all the named credentials created since a specific date.  $emcli list -resource=NamedCredentials -search="CredCreatedDate > '11-Nov-2013 12:37:20 PM'"Note that the timestamp has to be in the format DD-MON-YYYY HH:MI:SS AM/PM Some resources need a bind variable to be passed to get output. A bind variable is created in the resource and then referenced in the command. For example, this command will list all the default preferred credentials for target type oracle_database.Here is an example$ emcli list -resource="PreferredCredentialsDefault" -bind="TargetType='oracle_database'" -colsize="SetName:15,TargetType:15" You can provide multiple bind variables. To verify if a column is searchable or requires a bind variable, use the –help option. Here is an example:$ emcli list -resource="PreferredCredentialsDefault" -help 4. Secure accessWhen list verb collects the data, it only displays content for which the administrator currently logged into emcli, has access. For example consider this usecase:AdminA has access only to TargetA. AdminA logs into EM CLIExecuting the list verb to get the list of all targets will only show TargetA.5. User defined SQLUsing the –sql option, user defined sql can be executed. The SQL provided in the -sql option is executed as the EM user MGMT_VIEW, which has read-only access to the EM published MGMT$ database views in the SYSMAN schema. To get the list of EM published MGMT$ database views, go to the Extensibility Programmer's Reference book in EM documentation. There is a chapter about Using Management Repository Views. It’s always recommended to reference the documentation for the supported MGMT$ database views.  Consider you are using the MGMT$ABC view which is not in the chapter. During upgrade, it is possible, since the view was not in the book and not supported, it is likely the view might undergo a change in its structure or the data in it. Using a supported view ensures that your scripts using -sql will continue working after upgrade.Here’s an example  $ emcli list -sql='select * from mgmt$target' 6. JSON output support    JSON (JavaScript Object Notation) enables data to be displayed in a collection of name/value pairs. There is lot of reading material about JSON on line for more information.As an example, we had a requirement where an EM administrator had many 11.2 databases in their test environment and the developers had requested an Administrator to change the lifecycle status from Test to Production which meant the admin had to go to the EM “All targets” page and identify the set of 11.2 databases and then to go into each target database page and manually changes the property to Production. Sounds easy to say, but this Administrator had numerous targets and this task is repeated for every release cycle.We told him there is an easier way to do this with a script and he can reuse the script whenever anyone wanted to change a set of targets to a different Lifecycle status. Here is a jython script which uses list and JSON to change all 11.2 database target’s LifeCycle Property value.If you are new to scripting and Jython, I would suggest visiting the basic chapters in any Jython tutorials. Understanding Jython is important to write the logic depending on your usecase.If you are already writing scripts like perl or shell or know a programming language like java, then you can easily understand the logic.Disclaimer: The scripts in this post are subject to the Oracle Terms of Use located here.  1 from emcli import *  2  search_list = ['PROPERTY_NAME=\'DBVersion\'','TARGET_TYPE= \'oracle_database\'','PROPERTY_VALUE LIKE \'11.2%\'']  3 if len(sys.argv) == 2:  4    print login(username=sys.argv[0])  5    l_prop_val_to_set = sys.argv[1]  6      l_targets = list(resource="TargetProperties", search=search_list,   columns="TARGET_NAME,TARGET_TYPE,PROPERTY_NAME")  7    for target in l_targets.out()['data']:  8       t_pn = 'LifeCycle Status'  9      print "INFO: Setting Property name " + t_pn + " to value " +       l_prop_val_to_set + " for " + target['TARGET_NAME']  10      print  set_target_property_value(property_records=      target['TARGET_NAME']+":"+target['TARGET_TYPE']+":"+      t_pn+":"+l_prop_val_to_set)  11  else:  12   print "\n ERROR: Property value argument is missing"  13   print "\n INFO: Format to run this file is filename.py <username>   <Database Target LifeCycle Status Property Value>" You can download the script from here. I could not upload the file with .py extension so you need to rename the file to myScript.py before executing it using emcli.A line by line explanation for beginners: Line  1 Imports the emcli verbs as functions  2 search_list is a variable to pass to the search option in list verb. I am using escape character for the single quotes. In list verb to pass more than one value for the same option, you should define as above comma separated values, surrounded by square brackets.  3 This is an “if” condition to ensure the user does provide two arguments with the script, else in line #15, it prints an error message.  4 Logging into EM. You can remove this if you have setup emcli with autologin. For more details about setup and autologin, please go the EM CLI book in EM documentation.  5 l_prop_val_to_set is another variable. This is the property value to be set. Remember we are changing the value from Test to Production. The benefit of this variable is you can reuse the script to change the property value from and to any other values.  6 Here the output of the list verb is stored in l_targets. In the list verb I am passing the resource as TargetProperties, search as the search_list variable and I only need these three columns – target_name, target_type and property_name. I don’t need the other columns for my task.  7 This is a for loop. The data in l_targets is available in JSON format. Using the for loop, each pair will now be available in the ‘target’ variable.  8 t_pn is the “LifeCycle Status” variable. If required, I can have this also as an input and then use my script to change any target property. In this example, I just wanted to change the “LifeCycle Status”.  9 This a message informing the user the script is setting the property value for dbxyz.  10 This line shows the set_target_property_value verb which sets the value using the property_records option. Once it is set for a target pair, it moves to the next one. In my example, I am just showing three dbs, but the real use is when you have 20 or 50 targets. The script is executed as:$ emcli @myScript.py subin Production The recommendation is to first test the scripts before running it on a production system. We tested on a small set of targets and optimizing the script for fewer lines of code and better messaging.For your quick reference, the resources available in Enterprise Manager 12.1.0.4.0 with list verb are:$ emcli list -helpWatch this space for more blog posts using the list verb and EM CLI Scripting use cases. I hope you enjoyed reading this blog post and it has helped you gain more information about the list verb. Happy Scripting!!Disclaimer: The scripts in this post are subject to the Oracle Terms of Use located here. Stay Connected: Twitter | Facebook | YouTube | Linkedin | Newsletter mt=8">Download the Oracle Enterprise Manager 12c Mobile app

  Read the article

• Session Sharing with another User on *NIX and Windows

  - by Giri Mandalika

  Oracle Solaris Since Solaris is not widely known for its graphical interface, let's just focus on sharing a terminal session in read-only mode with another user on the same system. Here is an example. eg., % finger Login Name TTY Idle When Where root Super-User pts/1 Sat 16:57 dhcp-amer-vpn-rmdc-a sunperf ??? pts/2 4 Sat 16:41 pitcher.sfbay.sun.com In this example, two users root and sunperf are connected to the same system from two different terminals pts/1 and pts/2 respectively. If the root user wants to show something to sunperf user -- what s/he is doing in her/his terminal, for example, it can be accomplished with the following command. script -a /dev/null | tee -a <target_terminal eg., # script -a /dev/null | tee -a /dev/pts/2 Script started, file is /dev/null # # uptime 5:04pm up 1 day(s), 2:56, 2 users, load average: 0.81, 0.81, 0.81 # # isainfo -v 64-bit sparcv9 applications crc32c cbcond pause mont mpmul sha512 sha256 sha1 md5 camellia kasumi des aes ima hpc vis3 fmaf asi_blk_init vis2 vis popc 32-bit sparc applications crc32c cbcond pause mont mpmul sha512 sha256 sha1 md5 camellia kasumi des aes ima hpc vis3 fmaf asi_blk_init vis2 vis popc v8plus div32 mul32 # # exit Script done, file is /dev/null After the script .. | tee .. command, sunperf user should be able to see the root user's stdin and stdout contents in her/his own terminal until the script session exits in root user's terminal. Since this kind of sharing is based on capturing and redirecting the contents to the target terminal, the users on the receiving end won't be able to see whatever is being edited on initiators' terminal [using editors such as vi]. Also it is not possible to share the session with any connected user on the system unless the initiator has the necessary permissions and privileges. The script utility records everything printed in a terminal session, while the tee utility replicates the contents of the screen capture on to the standard output of the target terimal. The tee utility does not buffer the output - so, the screen capture from the initiators' terminal appears almost right away in the target terminal. Though I never tested, this technique may work on all *NIX and Linux flavors with little or no changes. Also there might be other ways to accomplish this. [Thanks to Sujeet for sharing this tip] Microsoft Windows Most of the Windows users may rely on VNC services to share a desktop session. Another way to share the desktop session is to use the Remote Desktop Connection (RDC) client. Here are the steps. Connect to the target Windows system using Remote Desktop Connection client Launch Windows Task Manager Navigate to the "Users" tab Find the user session that you want to connect to and have full control over as the other user who is currently holding that session Select the user name in Windows Task Manager, right click and choose the option "Remote Control" A window pops up on the other user's session with the message "<USER is requesting to control your session remotely. Do you accept the request?" Once the other user says "Yes", you will be granted access to that session. Since then both users should be able to see the same screen and even control the session from their respective workstations.

  Read the article

• Unable to Sign in to the Microsoft Online Services Signin application from Windows 7 client located behind ISA firewall

  - by Ravindra Pamidi

  A while ago i helped a customer troubleshoot authentication problem with Microsoft Online Services Signin application.  This customer was evaluating Microsoft BPOS (Business Productivity Online Services) and was having trouble using the single sign on application behind ISA 2004 firewall.The network structure is fairly simple with single Windows 2003 Active Directory domain and Windows 7 clients. On a successful logon to the Microsoft Online Services Signin application, this application provides single signon functionality to all of Microsoft online services in the BPOS package. Symptoms:When trying to signin it fails with error "The service is currently unavailable. Please try again later. If problems continue, contact your service administrator". If ISA 2004 firewall is removed from the picture the authentication succeeds.Troubleshooting: Enabled ISA Server firewall logging along with Microsoft Network Monitor tool on the Windows 7 Client while reproducing the issue. Analysis of the ISA Server Firewall logs and Microsoft Network capture revealed that the Microsoft Online Services Sign In application when sending request to ISA Server does not send the domain credentials and as a result ISA Server responds with an error code of HTTP 407 Proxy authentication required listing out the supported authentication mechanisms.  The application in question is expected to send the credentials of the domain user in response to this request. However in this case, it fails to send the logged on user's domain credentials. Bit of researching on the Internet revealed that The "Microsoft Online Services Sign In" application by default does not support Outbound Internet Proxy authentication. In order for it to send the logged on user's domain credentials we had to make  changes to its configuration file "SignIn.exe.config" located under "Program Files\Microsoft Online Services\Sign In" folder. Step by Step details to configure the configuration file are documented on Microsoft TechNet website given below.  Configure your outbound authenticating proxy serverhttp://www.microsoft.com/online/help/en-us/helphowto/cc54100d-d149-45a9-8e96-f248ecb1b596.htm After the above problem was addressed we were still not able to use the "Microsoft Online Services Sign In" application and it failed with the same error.  Analysis of another network capture revealed that the application in question is now sending the required credentials and the connection seems to terminate at a later stage. Enabled verbose logging for the "Microsoft Online Services Sign In" application and then reproduced the problem. Analysis of the logs revealed a time difference between the local client and Microsoft Online services server of around seven minutes which is above the acceptable time skew of five minutes. Excerpt from Microsoft Online Services Sign In application verbose log:  1/26/2012 1:57:51 PM Verbose SingleSignOn.GetSSOGenericInterface SSO Interface URL: https://signinservice.apac.microsoftonline.com/ssoservice/UID1/26/2012 1:57:52 PM Exception SSOSignIn.SignIn The security timestamp is invalid because its creation time ('2012-01-26T08:34:52.767Z') is in the future. Current time is '2012-01-26T08:27:52.987Z' and allowed clock skew is '00:05:00'.1/26/2012 1:57:52 PM Exception SSOSignIn.SignIn  Although the Windows 7 Clients successfully synchronized time to the domain controller for the domain, the domain controller was not configured to synchronize time with external NTP servers. This caused a gradual drift in time on the network thus resulting in the above issue. Reconfigured the domain controller holding the PDC FSMO role to synchronize time with external time source ( time.nist.gov ) and edited the system policy on the ISA server firewall to allow NTP traffic to time.nist.gov Configure the time source for the forest:Windows Time Servicehttp://technet.microsoft.com/en-us/library/cc794937(WS.10).aspx Forced synchronization of Windows time using the command w32tm /resync on the domain controller and later on the clients each of which had corrected the seven minutes difference. This resolved the problem with logon to Microsoft Online Services Sign In.

  Read the article

• Webcast Q&A: ResCare Solves Content Lifecycle Challenges with Oracle WebCenter

  - by Kellsey Ruppel

  Last week we had the fourth webcast in our WebCenter in Action webcast series, "ResCare Solves Content Lifecycle Challenges with Oracle WebCenter", where customer Joe Lichtefeld from ResCare and Wayne Boerger & Doug Thompson from Oracle Partner TEAM Informatics shared how Oracle WebCenter is powering allowing ResCare to solve content lifecycle challenges, reduce compliance and business risks, and increase adoption of intranet as primary business communication tool In case you missed it, here's a recap of the Q&A.   Joe Lichtefeld, ResCare  Q: Did you run into any issues in the deployment of the platform?A: We experienced very few issues when implementing the content management and search functionalities. There were some challenges in determining the metadata structure. We tried to find a fine balance between having enough fields to provide the functionality needed, but trying to limit the impact to the contributing members.  Q: What has been the biggest benefit your end users have seen?A: The biggest benefit to date is two-fold. Content on the intranet can be maintained by the individual contributors more timely than in our old process of all requests being updated by IT. The other big benefit is the ability to find the most current version of a document instead of relying on emails and phone calls to track down the "current" version. Q: Was there any resistance internally when implementing the solution? If so, how did you overcome that?A: We experienced very little resistance. Most of our community groups were eager to be able to contribute and maintain their information. We had the normal hurdles of training and follow-up training with implementing a new system and process. As our second phase rolled out access to all employees, we have received more positive feedback on the accessibility of information. Wayne Boerger & Doug Thompson, TEAM Informatics Q: Can you integrate multiple repositories with the Google Search Appliance? Yes, the Google Search Appliance is designed to index lots of different repositories, from both public and internal sources. There are included connectors to many repositories, such as SharePoint, databases, file systems, LDAP, and with the TEAM GSA Connector and the Oracle Content Server. And the index for these repositories can be configured into different collections depending on the use cases that each customer has, and really, for each need within a customer environment. Q: How many different filters can you add when the search results are returned? A: Presuming this question is about the filtering on the search results. You can add as many filters as you like and it can be done by collection or any number of other criteria. Most importantly, customers now have the ability to limit the returned content by a set metadata value. Q: With the TEAM Sites Connector, what types of content can you sync? A: There’s really no limit; if it can be checked into the content server, then it is eligible for sync into Sites.  So basically, any digital file that has relevance to a Sites implementation can be checked into the WC Content central repository and then the connector can/will manage it. Q: Using the Connector, are there any limitations around where in Sites that synced content can be used? A: There are no limitations about where it can be used. When setting up your environment to use it, you just need to think through the different destinations on the Sites side that might use the content; that way you’ve got the right information to create the rules needed for the connector. If you missed the webcast, be sure to catch the replay to see a live demonstration of WebCenter in action!  ResCare Solves Content Lifecycle Challenges with Oracle WebCenter from Oracle WebCenter

  Read the article

• BIP 10.1.3.4.x June 2010 Update Available

  - by Tim Dexter

  A new patchset for 10.1.3.4.0 and 10.1.3.4.1 is available on Metalink. some notes: The patch number is 9791839. This patchset includes 28 new bug fixes since the last patchset release on March 31. This is a culmulative update that includes all the fixes and enhancements from previous updates. The patch will supercede the other two updates. Install instructions are in the readme inside the patch There is also a new BIP client patch available, 9821068. No new template building features to my knowledge but there is an update to the template viewer to allow you to test and debug you siny new Excel templates. Server 8529759XMLP_TEMPLATE_DESIGNER CANNOT SAVE / UPLOAD TEMPLATE 8566455 BI PUBLISHER SCHEDULER DOES NOT START WITH JNDI DATA SOURCE 9295667RESPONSE OF GETSCHEDULEDREPORTINFO RETURNS STATUS AS 'UNKNOWN' INSTEAD OF 'SCHED 9542413 UNABLE TO CREATE A NEW TEMPLATE FROM UI 9546137 EXCEL ANALYZER TEMPLATE FAILS FOR A STRUCTURED XML WHEN IT IS UPLOADED 9556338 SIEBEL - BIP PARAMETERS SORT ORDER 9560562 BI PUBLISHER CACHE DIRECTORY FILLING UP AND POINTING TO INVALID DIRECTORY 9646599 USER ROLE DEFINED AS PRIMARYGROUP IN ACTIVEDIRECTORY GROUP ARE NOT RECOGNIZED 9664768 ER: NEED TO BIND USER ATTRIBUTE VALUES DEFINED IN ACTIVEDIRECTORY IN DATA QUERY 9665075 BI PUBLISHER AFTER 9546699 NOTIFICATIONS FOR REPORTS FAIL 9669973 ER: NEED TO SUPPORT PRE-PROCESSING XML WITH XSL FOR EXCEL TEMPLATE 9704401 ER: NEED TO SUPPORT DEFAULT GROUP FOR ALL USERS IN LDAP/AD SECURITY 9711899 SEARCH PARAMETER IS NOT VISIBLE WHEN SCHEDULE A REPORT 9753736 SOME ROLES FROM ACTIVEDIRECTORY ARE NOT LISTED IN ADMIN ROLE-FOLDER MAPPING 9771354 MULTIPLE PARAMETERS IN 10.1.3.4.1 DATA TEMPLATE ACT ACT DIFFERENTLY FROM 10.1.3. 9772982 "REFRESH OTHER PARAMETERS ON CHANGE" DOESN'T WORK PROPERLY Core  8599646 ER:EXTRA SPACE ADDED BELOW IMAGE IN A TABLE CELL OF TEMPLATE IN FIREFOX 9377593 SOME ROWS HEIGHT IN HTML/EXCEL OUTPUT ARE TOO BIG IN BI PUBLISHER 9487030 NAVIGATION TREE REPEATING TWICE IN PDF DCCUMENT CREATED BY BI PUBLISHER 9509432 PERFORMANCE ISSUE WHEN USING PDF TEMPLATE 9534424 PS: DOCUMENT-REPEAT-FULLPATH-ELEMENTNAME SHOULDNT USE DOT "." AS PATH SEPARATOR 9553360 FORMPROCESSOR CANNOT PARSE SOME PDF TEMPLATES 9554959 TEXT IN AUTOSHAPE IS NOT PROPERLY CUT OFF FOR LINE WRAPPING 9569417 AFTER APPLYING PATCH 9509432 PDF TEMPLATES WITH DBDRV PRODUCE NO OUTPUT 9571670 ER: EXCEL TEMPLATE TO SUPPORT XSLT LOGIC AND XSL CUSTOM EXTENTIONS 9589809 XSL:CALL-TEMPLATE IS MISSING IN GENERATED XSL FILE 9605920 BOOKMARK TESTCASE FAILED DUE TO ER9283933 9689634 PRINT FLOW CHART USING ACROSS 3 DOWN 0 GIVES EXTRA BLANK PAGES You might have noticed some fixes and ehancements to the Excel templates so I can get back on those now. There is a part two to the Mapviewer BIP Mashup coming ... just need aanother 4 hours in the day to squeeze it in.

  Read the article

< Previous Page | 2299 2300 2301 2302 2303 2304 2305 2306 2307 2308 2309 2310  | Next Page >