Search Results

Search found 10004 results on 401 pages for 'thread pool'.

Page 294/401 | < Previous Page | 290 291 292 293 294 295 296 297 298 299 300 301  | Next Page >

• cannot access localhost using ip

  - by Robert

  I have done a small web development project using eclipse. It runs well when I try running it on browser with url localhost:8080/myproject/home.html. But if I want to access it on another machine (laptop, mobile, etc. using the same wifi) it is not possible; it is not able to connect. After Googling for a while found out that I have to use the IP address instead of 'localhost'. So I tried 10.0.0.4:8080/myproject/home.html, but still does not work. In fact i am unable to open that url on the same machine (where localhost:8080/myproject/home.html works fine). I also added a new Inbound rule in control panel firewall settings, allowing access to all ports for protocol TCP. Still have problem in running application with the url 10.0.0.4:8080/myproject/home.html (both on same machine as well as laptop and mobile). FYI i am using Eclipse Indigo, Apache tomcat 6.0 and server.xml file contents is as below: <?xml version="1.0" encoding="UTF-8"?> <!-- Licensed to the Apache Software Foundation (ASF) under one or more contributor license agreements. See the NOTICE file distributed with this work for additional information regarding copyright ownership. The ASF licenses this file to You under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. --><!-- Note: A "Server" is not itself a "Container", so you may not define subcomponents such as "Valves" at this level. Documentation at /docs/config/server.html --><Server port="8005" shutdown="SHUTDOWN"> <!--APR library loader. Documentation at /docs/apr.html --> <Listener SSLEngine="on" className="org.apache.catalina.core.AprLifecycleListener"/> <!--Initialize Jasper prior to webapps are loaded. Documentation at /docs/jasper-howto.html --> <Listener className="org.apache.catalina.core.JasperListener"/> <!-- Prevent memory leaks due to use of particular java/javax APIs--> <Listener className="org.apache.catalina.core.JreMemoryLeakPreventionListener"/> <!-- JMX Support for the Tomcat server. Documentation at /docs/non-existent.html --> <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener"/> <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener"/> <!-- Global JNDI resources Documentation at /docs/jndi-resources-howto.html --> <GlobalNamingResources> <!-- Editable user database that can also be used by UserDatabaseRealm to authenticate users --> <Resource auth="Container" description="User database that can be updated and saved" factory="org.apache.catalina.users.MemoryUserDatabaseFactory" name="UserDatabase" pathname="conf/tomcat-users.xml" type="org.apache.catalina.UserDatabase"/> </GlobalNamingResources> <!-- A "Service" is a collection of one or more "Connectors" that share a single "Container" Note: A "Service" is not itself a "Container", so you may not define subcomponents such as "Valves" at this level. Documentation at /docs/config/service.html --> <Service name="Catalina"> <!--The connectors can use a shared executor, you can define one or more named thread pools--> <!-- <Executor name="tomcatThreadPool" namePrefix="catalina-exec-" maxThreads="150" minSpareThreads="4"/> --> <!-- A "Connector" represents an endpoint by which requests are received and responses are returned. Documentation at : Java HTTP Connector: /docs/config/http.html (blocking & non-blocking) Java AJP Connector: /docs/config/ajp.html APR (HTTP/AJP) Connector: /docs/apr.html Define a non-SSL HTTP/1.1 Connector on port 8080 --> <Connector port="8080" protocol="HTTP/1.1" address="10.0.0.4" connectionTimeout="20000" redirectPort="8443" /> <!-- A "Connector" using the shared thread pool--> <!-- <Connector executor="tomcatThreadPool" port="8080" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" /> --> <!-- Define a SSL HTTP/1.1 Connector on port 8443 This connector uses the JSSE configuration, when using APR, the connector should be using the OpenSSL style configuration described in the APR documentation --> <!-- <Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true" maxThreads="150" scheme="https" secure="true" clientAuth="false" sslProtocol="TLS" /> --> <!-- Define an AJP 1.3 Connector on port 8009 --> <Connector port="8009" protocol="AJP/1.3" redirectPort="8443"/> <!-- An Engine represents the entry point (within Catalina) that processes every request. The Engine implementation for Tomcat stand alone analyzes the HTTP headers included with the request, and passes them on to the appropriate Host (virtual host). Documentation at /docs/config/engine.html --> <!-- You should set jvmRoute to support load-balancing via AJP ie : <Engine name="Catalina" defaultHost="localhost" jvmRoute="jvm1"> --> <Engine defaultHost="localhost" name="Catalina"> <!--For clustering, please take a look at documentation at: /docs/cluster-howto.html (simple how to) /docs/config/cluster.html (reference documentation) --> <!-- <Cluster className="org.apache.catalina.ha.tcp.SimpleTcpCluster"/> --> <!-- The request dumper valve dumps useful debugging information about the request and response data received and sent by Tomcat. Documentation at: /docs/config/valve.html --> <!-- <Valve className="org.apache.catalina.valves.RequestDumperValve"/> --> <!-- This Realm uses the UserDatabase configured in the global JNDI resources under the key "UserDatabase". Any edits that are performed against this UserDatabase are immediately available for use by the Realm. --> <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/> <!-- Define the default virtual host Note: XML Schema validation will not work with Xerces 2.2. --> <Host appBase="webapps" autoDeploy="true" name="localhost" unpackWARs="true" xmlNamespaceAware="false" xmlValidation="false"> <!-- SingleSignOn valve, share authentication between web applications Documentation at: /docs/config/valve.html --> <!-- <Valve className="org.apache.catalina.authenticator.SingleSignOn" /> --> <!-- Access log processes all example. Documentation at: /docs/config/valve.html --> <!-- <Valve className="org.apache.catalina.valves.AccessLogValve" directory="logs" prefix="localhost_access_log." suffix=".txt" pattern="common" resolveHosts="false"/> --> <Context docBase="myproject" path="/myproject" reloadable="true" source="org.eclipse.jst.jee.server:myproject"/></Host> </Engine> </Service> </Server>

  Read the article

• Refresh layout while filling it

  - by neutrino

  Hi guys, I have an activity with a HorizontalScrollView. When it opens, I start filling this view (or rather, a container layout inside it) with another views. This is done from another thread by using handler.post. The views are added in bunches of 15, and when there are no more views to add, I start updating them with new data (this is a kind of streaming data from a server). The problem is that the scrollview is empty until all of the views are added. As soon as they are all added and start updating, the scrollview gets drawn. How do I refresh it in the process of adding views? I don't want the screen to be empty for 3 seconds while all of the views are added. Thanks a lot. UPDATE: turned out this problem is not specific for HorizontalScrollView, this is the case for any generic layout.

  Read the article

• vb.net - how do I parse a percentage value from a grid cell?

  - by Bob Palin

  I'm trying to parse a formatted percentage value back from a datagridviewcell that has been set with the "P" formatter: double percent = 0.96 cell.value = percent.tostring("p") gives me a displayed value of 96 % which is what I want. Now what I'm looking for is something like what is provided for the other formatting strings - NumberStyles.HexNumber, Currency etc so that I can do this double percent= double.parse( cell.value, NumberStyles.Percent ) which would give me a percent value of .96 I have scoured the .net documentation but can't find any sort of AllowPercent style like the others - is there one? Bob Palin p.s. I see there is another question here like this and tried to expand on it in that thread, but was deleted by a moderator and told to post a new question.

  Read the article

• Mongrel with Ruby 1.9.

  - by JussiR

  When starting the server, I get this strange error after updating to Ruby 1.9: " [BUG] cross-thread violation on rb_gc() ruby 1.8.6 (2008-08-11) [i386-mswin32] This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information. " My mongrel version is 1.1.6, which should be compatible with Ruby 1.9. I also still have the Ruby 1.8.6 installation, so i assume that for some reason mongrel tries to access that and kills ruby? My rails version is 2.3.4, in case it matters.

  Read the article

• NSOpenGLView in NSSplitView

  - by Remizorrr

  When i put an NSOpenglView in NSSplitView, a problem occurs while dragging splitter. The openGLView and SplitView are resizing asynchronously. i found a solution in apple mail list thread http://developer.apple.com/mac/library/samplecode/GLChildWindowDemo/Introduction/Intro.html and i found a solution with some carbon calls. but now i get link error (only in release mode). so i'v got two questions - is there any cocoa way to fix the splitter - gl problem? if no - how can i fix carbon linker errors in release mode?

  Read the article

• Space bar and arrow keys on Radio buttons trigger TypeError: Error #1009

  - by Sr.Richie

  I've just discovered a bug in my app, it looks like a Flash player bug, i would like to know if anyone has found a workaround or something. I've some radio buttons groups in my app. If I press the arrow keys while holding the spacebar pressed, it ends up triggering TypeError: Error #1009: Cannot access a property or method of a null object reference. at fl.controls::LabelButton/drawIcon() at fl.controls::LabelButton/draw() at fl.controls::RadioButton/draw() at fl.core::UIComponent/callLaterDispatcher() If found this thread that describes my same situation. Do you think there's any workaround for this? Is it really a flash bug?

  Read the article

• How to implement blocking request-reply using Java concurrency primitives?

  - by Uri

  My system consists of a "proxy" class that receives "request" packets, marshals them and sends them over the network to a server, which unmarshals them, processes, and returns some "response packet". My "submit" method on the proxy side should block until a reply is received to the request (packets have ids for identification and referencing purposes) or until a timeout is reached. If I was building this in early versions of Java, I would likely implement in my proxy a collection of "pending messages ids", where I would submit a message, and wait() on the corresponding id (with a timeout). When a reply was received, the handling thread would notify() on the corresponding id. Is there a better way to achieve this using an existing library class, perhaps in java.util.concurrency? If I went with the solution described above, what is the correct way to deal with the potential race condition where a reply arrives before wait() is invoked?

  Read the article

• Django Comments and Users integration

  - by Patrick

  Hi folks, I am new to django. I am trying to use django.contrib.comments, I saw the table in the database like this, but how can I integrate it with user_id, user_photos, user_name, user_email....and those things with the django commenting system? I also tried to use thread-comments, but I can't configure it properly, is the django threadedcomments table similar to following ? Please let me know if any of you have done this before....all I need is a user login, and post comments, and then show list of comments with users' profile photos and username, as well as there comments. I think shouldn't be that hard. Thank you very much again. +-----------------+--------------+------+-----+---------+----------------+ | Field | Type | Null | Key | Default | Extra | +-----------------+--------------+------+-----+---------+----------------+ | id | int(11) | NO | PRI | NULL | auto_increment | | content_type_id | int(11) | NO | MUL | NULL | | | object_pk | longtext | NO | | NULL | | | site_id | int(11) | NO | MUL | NULL | | | user_id | int(11) | YES | MUL | NULL | | | user_name | varchar(50) | NO | | NULL | | | user_email | varchar(75) | NO | | NULL | | | user_url | varchar(200) | NO | | NULL | | | comment | longtext | NO | | NULL | | | submit_date | datetime | NO | | NULL | | | ip_address | char(15) | YES | | NULL | | | is_public | tinyint(1) | NO | | NULL | | | is_removed | tinyint(1) | NO | | NULL | | +-----------------+--------------+------+-----+---------+----------------+

  Read the article

• Guidelines of when to use locking

  - by miguel

  I would like to know if there are any guidelineswhich a developer should follow as to when (and where) to place locks. For instance: I understand that code such as this should be locked, to avoid the possibility of another thread changing the value of SomeHeapValue unexpectedly. class Foo { public SomeHeapObject myObject; public void DoSummat(object inputValue_) { myObject.SomeHeapValue = inputValue_; } } My question is, however, how deep does one go with the locking? For instance, if we have this code: class Foo { public SomeHeapObject myObject; public void DoSummat(object inputValue_) { myObject.SomeHeapValue = GetSomeHeapValue(); } } Should we lock in the DoSummat(...) method, or should we lock in the GetSomeHeapValue() method? Are there any guidelines that you all keep in mind when strcturing multi-threaded code?

  Read the article

• getting core file

  - by ashwani66476

  Hello All I am running a Core JAVA application on AIX machine, and it creates a file named "core". My concern are 1. I am not able to open this "core" file in "Heap Analyzer" or "Thread Analyzer". 2. Which tools do I need to use, So that I can analyze this "core" file. 3. Could any one elaborate more about this file? why this "core" file creates. Waiting for response..... Many Thanks

  Read the article

• Safe HttpContext.Current.Cache Usage

  - by Burak SARICA

  Hello there, I use Cache in a web service method like this : var pblDataList = (List<blabla>)HttpContext.Current.Cache.Get("pblDataList"); if (pblDataList == null) { var PBLData = dc.ExecuteQuery<blabla>( @"SELECT blabla"); pblDataList = PBLData.ToList(); HttpContext.Current.Cache.Add("pblDataList", pblDataList, null, DateTime.Now.Add(new TimeSpan(0, 0, 15)), Cache.NoSlidingExpiration, CacheItemPriority.Normal, null); } I wonder is it thread safe? I mean the method is called by multiple requesters And more then one requester may hit the second line at the same time while the cache is empty. So all of these requesters will retrieve the data and add to cache. The query takes 5-8 seconds. May a surrounding lock statement around this code prevent that action? (I know multiple queries will not cause error but i want to be sure running just one query.)

  Read the article

• Unknown error in Producer/Consumer program, believe it to be an infinite loop.

  - by ray2k

  Hello, I am writing a program that is solving the producer/consumer problem, specifically the bounded-buffer version(i believe they mean the same thing). The producer will be generating x number of random numbers, where x is a command line parameter to my program. At the current moment, I believe my program is entering an infinite loop, but I'm not sure why it is occurring. I believe I am executing the semaphores correctly. You compile it like this: gcc -o prodcon prodcon.cpp -lpthread -lrt Then to run, ./prodcon 100(the number of randum nums to produce) This is my code. typedef int buffer_item; #include <stdlib.h> #include <stdio.h> #include <pthread.h> #include <semaphore.h> #include <unistd.h> #define BUFF_SIZE 10 #define RAND_DIVISOR 100000000 #define TRUE 1 //two threads void *Producer(void *param); void *Consumer(void *param); int insert_item(buffer_item item); int remove_item(buffer_item *item); int returnRandom(); //the global semaphores sem_t empty, full, mutex; //the buffer buffer_item buf[BUFF_SIZE]; //buffer counter int counter; //number of random numbers to produce int numRand; int main(int argc, char** argv) { /* thread ids and attributes */ pthread_t pid, cid; pthread_attr_t attr; pthread_attr_init(&attr); pthread_attr_setscope(&attr, PTHREAD_SCOPE_SYSTEM); numRand = atoi(argv[1]); sem_init(&empty,0,BUFF_SIZE); sem_init(&full,0,0); sem_init(&mutex,0,0); printf("main started\n"); pthread_create(&pid, &attr, Producer, NULL); pthread_create(&cid, &attr, Consumer, NULL); printf("main gets here"); pthread_join(pid, NULL); pthread_join(cid, NULL); printf("main done\n"); return 0; } //generates a randum number between 1 and 100 int returnRandom() { int num; srand(time(NULL)); num = rand() % 100 + 1; return num; } //begin producing items void *Producer(void *param) { buffer_item item; int i; for(i = 0; i < numRand; i++) { //sleep for a random period of time int rNum = rand() / RAND_DIVISOR; sleep(rNum); //generate a random number item = returnRandom(); //acquire the empty lock sem_wait(&empty); //acquire the mutex lock sem_wait(&mutex); if(insert_item(item)) { fprintf(stderr, " Producer report error condition\n"); } else { printf("producer produced %d\n", item); } /* release the mutex lock */ sem_post(&mutex); /* signal full */ sem_post(&full); } return NULL; } /* Consumer Thread */ void *Consumer(void *param) { buffer_item item; int i; for(i = 0; i < numRand; i++) { /* sleep for a random period of time */ int rNum = rand() / RAND_DIVISOR; sleep(rNum); /* aquire the full lock */ sem_wait(&full); /* aquire the mutex lock */ sem_wait(&mutex); if(remove_item(&item)) { fprintf(stderr, "Consumer report error condition\n"); } else { printf("consumer consumed %d\n", item); } /* release the mutex lock */ sem_post(&mutex); /* signal empty */ sem_post(&empty); } return NULL; } /* Add an item to the buffer */ int insert_item(buffer_item item) { /* When the buffer is not full add the item and increment the counter*/ if(counter < BUFF_SIZE) { buf[counter] = item; counter++; return 0; } else { /* Error the buffer is full */ return -1; } } /* Remove an item from the buffer */ int remove_item(buffer_item *item) { /* When the buffer is not empty remove the item and decrement the counter */ if(counter > 0) { *item = buf[(counter-1)]; counter--; return 0; } else { /* Error buffer empty */ return -1; } }

  Read the article

• Copying a java text file into a String.

  - by Deepak Konidena

  Hi, I run into the following errors when i try to store a large file into a string. Exception in thread "main" java.lang.OutOfMemoryError: Java heap space at java.util.Arrays.copyOf(Arrays.java:2882) at java.lang.AbstractStringBuilder.expandCapacity(AbstractStringBuilder.java:100) at java.lang.AbstractStringBuilder.append(AbstractStringBuilder.java:515) at java.lang.StringBuffer.append(StringBuffer.java:306) at rdr2str.ReaderToString.main(ReaderToString.java:52) As is evident, i am running out of heap space. Basically my pgm looks like something like this. FileReader fr = new FileReader(<filepath>); sb = new StringBuffer(); char[] b = new char[BLKSIZ]; while ((n = fr.read(b)) > 0) sb.append(b, 0, n); fileString = sb.toString(); Can someone suggest me why i am running into heap space error? Thanks.

  Read the article

• SetWindowHookEx and execution blocking

  - by Kalaz

  Hello, I just wonder... I mainly use .NET but now I started to investigate WINAPI calls. For example I am using this piece of code to hook to the API functions. It starts freezing, when I try to debug the application... using System; using System.Diagnostics; using System.Runtime.InteropServices; using System.Threading; using System.Windows.Forms; public class Keyboard { private const int WH_KEYBOARD_LL = 13; private const int WM_KEYDOWN = 0x0100; private static LowLevelKeyboardProc _proc = HookCallback; private static IntPtr _hookID = IntPtr.Zero; public static event Action<Keys,bool, bool> KeyDown; public static void Hook() { new Thread(new ThreadStart(()=> { _hookID = SetHook(_proc); Application.Run(); })).Start(); } public static void Unhook() { UnhookWindowsHookEx(_hookID); } private static IntPtr SetHook(LowLevelKeyboardProc proc) { using (Process curProcess = Process.GetCurrentProcess()) using (ProcessModule curModule = curProcess.MainModule) { return SetWindowsHookEx(WH_KEYBOARD_LL, proc, GetModuleHandle(curModule.ModuleName), 0); } } private delegate IntPtr LowLevelKeyboardProc( int nCode, IntPtr wParam, IntPtr lParam); private static IntPtr HookCallback( int nCode, IntPtr wParam, IntPtr lParam) { if (nCode >= 0 && wParam == (IntPtr)WM_KEYDOWN) { int vkCode = Marshal.ReadInt32(lParam); Keys k = (Keys) vkCode; if (KeyDown != null) { KeyDown.BeginInvoke(k, IsKeyPressed(VirtualKeyStates.VK_CONTROL), IsKeyPressed(VirtualKeyStates.VK_SHIFT),null,null); } } return CallNextHookEx(_hookID, nCode, wParam, lParam); } private static bool IsKeyPressed(VirtualKeyStates virtualKeyStates) { return (GetKeyState(virtualKeyStates) & (1 << 7))==128; } [DllImport("user32.dll", CharSet = CharSet.Auto, SetLastError = true)] private static extern IntPtr SetWindowsHookEx(int idHook, LowLevelKeyboardProc lpfn, IntPtr hMod, uint dwThreadId); [DllImport("user32.dll", CharSet = CharSet.Auto, SetLastError = true)] [return: MarshalAs(UnmanagedType.Bool)] private static extern bool UnhookWindowsHookEx(IntPtr hhk); [DllImport("user32.dll", CharSet = CharSet.Auto, SetLastError = true)] private static extern IntPtr CallNextHookEx(IntPtr hhk, int nCode, IntPtr wParam, IntPtr lParam); [DllImport("kernel32.dll", CharSet = CharSet.Auto, SetLastError = true)] private static extern IntPtr GetModuleHandle(string lpModuleName); [DllImport("user32.dll")] static extern short GetKeyState(VirtualKeyStates nVirtKey); } enum VirtualKeyStates : int { VK_LBUTTON = 0x01, VK_RBUTTON = 0x02, VK_CANCEL = 0x03, VK_MBUTTON = 0x04, // VK_XBUTTON1 = 0x05, VK_XBUTTON2 = 0x06, // VK_BACK = 0x08, VK_TAB = 0x09, // VK_CLEAR = 0x0C, VK_RETURN = 0x0D, // VK_SHIFT = 0x10, VK_CONTROL = 0x11, VK_MENU = 0x12, VK_PAUSE = 0x13, VK_CAPITAL = 0x14, // VK_KANA = 0x15, VK_HANGEUL = 0x15, /* old name - should be here for compatibility */ VK_HANGUL = 0x15, VK_JUNJA = 0x17, VK_FINAL = 0x18, VK_HANJA = 0x19, VK_KANJI = 0x19, // VK_ESCAPE = 0x1B, // VK_CONVERT = 0x1C, VK_NONCONVERT = 0x1D, VK_ACCEPT = 0x1E, VK_MODECHANGE = 0x1F, // VK_SPACE = 0x20, VK_PRIOR = 0x21, VK_NEXT = 0x22, VK_END = 0x23, VK_HOME = 0x24, VK_LEFT = 0x25, VK_UP = 0x26, VK_RIGHT = 0x27, VK_DOWN = 0x28, VK_SELECT = 0x29, VK_PRINT = 0x2A, VK_EXECUTE = 0x2B, VK_SNAPSHOT = 0x2C, VK_INSERT = 0x2D, VK_DELETE = 0x2E, VK_HELP = 0x2F, // VK_LWIN = 0x5B, VK_RWIN = 0x5C, VK_APPS = 0x5D, // VK_SLEEP = 0x5F, // VK_NUMPAD0 = 0x60, VK_NUMPAD1 = 0x61, VK_NUMPAD2 = 0x62, VK_NUMPAD3 = 0x63, VK_NUMPAD4 = 0x64, VK_NUMPAD5 = 0x65, VK_NUMPAD6 = 0x66, VK_NUMPAD7 = 0x67, VK_NUMPAD8 = 0x68, VK_NUMPAD9 = 0x69, VK_MULTIPLY = 0x6A, VK_ADD = 0x6B, VK_SEPARATOR = 0x6C, VK_SUBTRACT = 0x6D, VK_DECIMAL = 0x6E, VK_DIVIDE = 0x6F, VK_F1 = 0x70, VK_F2 = 0x71, VK_F3 = 0x72, VK_F4 = 0x73, VK_F5 = 0x74, VK_F6 = 0x75, VK_F7 = 0x76, VK_F8 = 0x77, VK_F9 = 0x78, VK_F10 = 0x79, VK_F11 = 0x7A, VK_F12 = 0x7B, VK_F13 = 0x7C, VK_F14 = 0x7D, VK_F15 = 0x7E, VK_F16 = 0x7F, VK_F17 = 0x80, VK_F18 = 0x81, VK_F19 = 0x82, VK_F20 = 0x83, VK_F21 = 0x84, VK_F22 = 0x85, VK_F23 = 0x86, VK_F24 = 0x87, // VK_NUMLOCK = 0x90, VK_SCROLL = 0x91, // VK_OEM_NEC_EQUAL = 0x92, // '=' key on numpad // VK_OEM_FJ_JISHO = 0x92, // 'Dictionary' key VK_OEM_FJ_MASSHOU = 0x93, // 'Unregister word' key VK_OEM_FJ_TOUROKU = 0x94, // 'Register word' key VK_OEM_FJ_LOYA = 0x95, // 'Left OYAYUBI' key VK_OEM_FJ_ROYA = 0x96, // 'Right OYAYUBI' key // VK_LSHIFT = 0xA0, VK_RSHIFT = 0xA1, VK_LCONTROL = 0xA2, VK_RCONTROL = 0xA3, VK_LMENU = 0xA4, VK_RMENU = 0xA5, // VK_BROWSER_BACK = 0xA6, VK_BROWSER_FORWARD = 0xA7, VK_BROWSER_REFRESH = 0xA8, VK_BROWSER_STOP = 0xA9, VK_BROWSER_SEARCH = 0xAA, VK_BROWSER_FAVORITES = 0xAB, VK_BROWSER_HOME = 0xAC, // VK_VOLUME_MUTE = 0xAD, VK_VOLUME_DOWN = 0xAE, VK_VOLUME_UP = 0xAF, VK_MEDIA_NEXT_TRACK = 0xB0, VK_MEDIA_PREV_TRACK = 0xB1, VK_MEDIA_STOP = 0xB2, VK_MEDIA_PLAY_PAUSE = 0xB3, VK_LAUNCH_MAIL = 0xB4, VK_LAUNCH_MEDIA_SELECT = 0xB5, VK_LAUNCH_APP1 = 0xB6, VK_LAUNCH_APP2 = 0xB7, // VK_OEM_1 = 0xBA, // ';:' for US VK_OEM_PLUS = 0xBB, // '+' any country VK_OEM_COMMA = 0xBC, // ',' any country VK_OEM_MINUS = 0xBD, // '-' any country VK_OEM_PERIOD = 0xBE, // '.' any country VK_OEM_2 = 0xBF, // '/?' for US VK_OEM_3 = 0xC0, // '`~' for US // VK_OEM_4 = 0xDB, // '[{' for US VK_OEM_5 = 0xDC, // '\|' for US VK_OEM_6 = 0xDD, // ']}' for US VK_OEM_7 = 0xDE, // ''"' for US VK_OEM_8 = 0xDF, // VK_OEM_AX = 0xE1, // 'AX' key on Japanese AX kbd VK_OEM_102 = 0xE2, // "<>" or "\|" on RT 102-key kbd. VK_ICO_HELP = 0xE3, // Help key on ICO VK_ICO_00 = 0xE4, // 00 key on ICO // VK_PROCESSKEY = 0xE5, // VK_ICO_CLEAR = 0xE6, // VK_PACKET = 0xE7, // VK_OEM_RESET = 0xE9, VK_OEM_JUMP = 0xEA, VK_OEM_PA1 = 0xEB, VK_OEM_PA2 = 0xEC, VK_OEM_PA3 = 0xED, VK_OEM_WSCTRL = 0xEE, VK_OEM_CUSEL = 0xEF, VK_OEM_ATTN = 0xF0, VK_OEM_FINISH = 0xF1, VK_OEM_COPY = 0xF2, VK_OEM_AUTO = 0xF3, VK_OEM_ENLW = 0xF4, VK_OEM_BACKTAB = 0xF5, // VK_ATTN = 0xF6, VK_CRSEL = 0xF7, VK_EXSEL = 0xF8, VK_EREOF = 0xF9, VK_PLAY = 0xFA, VK_ZOOM = 0xFB, VK_NONAME = 0xFC, VK_PA1 = 0xFD, VK_OEM_CLEAR = 0xFE } It works well even if you put messagebox into the event or something that blocks execution. But it gets bad if you try to put breakpoint into the event. Why? I mean event is not run in the same thread that the windows hook is. That means that It shouldn't block HookCallback. It does however... I would really like to know why is this happening. My theory is that Visual Studio when breaking execution temporarily stops all threads and that means that HookCallback is blocked... Is there any book or valuable resource that would explain concepts behind all of this threading?

  Read the article

• One executable with cmd-line params or just many satellite executables?

  - by Nikos Baxevanis

  I design an application back-end. For now, it is a .NET process (a Console Application) which hosts various communication frameworks such as Agatha and NServiceBus. I need to periodically update my datastore with values (coming from the application while it's running). I found three possible ways: Accept command line arguments, so I can call my console app with -update. On start up a background thread will periodically invoke the update method. Create an updater.exe app which will do the updates, but I will have code duplication since in some way it will need to query the data from the source in order to save it to the datastore. Which one is better?

  Read the article

• Java Non-Blocking HTTP Server

  - by Marcus

  I have written an application using embedded Jetty that makes network calls to other services. I presume that the serving threads are idle whilst waiting for the network calls to complete. Is there any way to have a worker thread that switches between requests to perform work that can be done at the current time and then when the network calls return also handle that? A request would be returned when all work has been completed for it. I know this is a common paradigm, and I have used it for non-blocking TCP networking, but I'm unsure as to how to achieve this on a Java HTTP server whilst also waiting on external results. Any links or explanations are appreciated. Thanks

  Read the article

• How to make a mutable ItemizedOverlay

  - by Hamy

  Hey all, I would like to make a Google map overlay with changable pins. An easy way to visualize this would be to think of a near real time overlay, where the pins are constantly changing location. However, I can't seem to think of a safe way to do this with the ItemizedOverlay. The problem seems to be the call to populate - If size() is called by some maps thread, and then my data changes, then the result when the maps call accesses getItem() can be an IndexOutOfBoundsException. Can anyone think of a better solution than overloading populate and wrapping super.populate in a synchronized block? Perhaps I could get better luck using a normal Overlay? The Itemized one seems to exist to manage the data for you, perhaps I am making a fundamental mistake by using it? Thanks for any help, my brain is hurting! Hamy

  Read the article

• How to show Label1.Text for each item in a foreach statement?

  - by Mike108

  I want to show each item Id that is doing now dynamically in a foreach statement. But the following code only shows the last item Id in Label1.Text. How to show Label1.Text for each item in a foreach statement? I use asp.net C#. protected void Button1_Click(object sender, EventArgs e) { List<int> list = new List<int>() { 1,2,3,4,5 }; foreach (var item in list) { Label1.Text = string.Format("I'm doing item {0} now.", item.ToString()); Thread.Sleep(1 * 1000); } }

  Read the article

• WPF DataGrid adding extra "ghost" row

  - by hs2d

  Hei, In my application i'm using DataGrid to show some data. To get everything working with threading i'm using AsyncObservableCollection as DataContext of DataGrid. When my application starts it looks for files in some folders and updates AsyncObservableCollection. Now here's where things go bad, when i start the application for some reason i get 2 rows with same data in DataGrid even if there is one item in collection. If i add a delay(Thread.Sleep() 50ms minimum) before executing loading files method then DataGrid show everything correctly (no extra row). Have anybody encountered something similar or is there something else i should try? Thanks in advance!

  Read the article

• Calling UITableViews delegate methods directly.

  - by RickiG

  Hi I was looking for a way to call the edit method directly. - (void)tableView:(UITableView *)theTableView commitEditingStyle:(UITableViewCellEditingStyle)editingStyle forRowAtIndexPath:(NSIndexPath *)indexPath I have all my logic for animating manipulated cells, removing from my model array etc. in this method. It is getting called when a user swipes, adds or rearranges, but I would like to call it manually/directly as a background thread changes my model. I have constructed an NSIndexPath like so: NSIndexPath *path = [NSIndexPath indexPathForRow:i inSection:1]; I just can't figure out how to call something like: [self.tableview commitEditingStyle:UITableViewCellEditingStyleDelete forRowAtIndexPath:path]; Do I need to gain access to the methods of this plain style UITableView in another way? Thanks:)

  Read the article

• How to block the UI during asynchronous operations in WPF

  - by mcintyre321

  We have a WPF app (actually a VSTO WPF app). On certain controls there are multiple elements which, when clicked, load data from a web service and update the UI. Right now, we carry out these web requests synchronously, blocking the UI thread until the response comes back. This prevents the user clicking around the app while the data is loading, potentially putting it into an invalid state to handle the data when it is returned. Of course the app becomes unresponsive if the request takes a long time. Ideally, we'd like to have the cancel button active during this time, but nothing else. Is there a clever way of doing this, or will we have to switch the requests to execute asynchronously using backgroundworker and write something that disables all the controls apart from the cancel button while a request is in progress?

  Read the article

• How to make a legacy webapp spring aware at the container level for bean autowire into Servlets?

  - by Pete

  We have a legacy web application (not Spring based) and are looking for best practices to autowire some newer Spring configured (thread safe) service beans into instance variables in several of the legacy servlets. Rewriting every servlet to Spring MVC is out of scope. For testability, we do not want any Spring specific bean lookup code in the Servlets to look up beans by name or similar. Note that we are not concerned about web specific bean scopes such as session or request; all services are singleton scope. Below shows relevant code snippet MyServlet extends LegacyServletSuperclass { private MyThreadSafeServiceBean wantThisToBeAutowiredBySpring; .... }

  Read the article

• I need to stop execution during recursive algorithm

  - by Shaza

  Hey, I have a problem in choosing the right method to accomplish my goal. I'm working on Algorithms teaching system, I'm using C#. I need to divide my algorithm into steps, each step will contain a recursion. I have to stop execution after each step, user can then move to the next step(next recursion) using a button in my GUI. After searching, threads was the right choice, but I found several methods: (Thread.sleep/interrupt): didn't work, my GUI freezed !! (Suspend/Resume): I've read that it's a bad idea to use. (Waithandles): still reading about them. (Monitor wait/resume). I don't have much time to try and read all previous methods, please help me in choosing the best method that fits my system.Any suggestions are extremal welcomed.

  Read the article

• Creating a provider. I receive this exception java.lang.SecurityException

  - by user308806

  Hello, I'm trying to create a provider. when I run the code i receive this exception Exception in thread "main" java.lang.SecurityException: JCE cannot authenticate the provider MyProvider at javax.crypto.Cipher.getInstance(DashoA13*..) at javax.crypto.Cipher.getInstance(DashoA13*..) at hellman.Main.main(Main.java:68) Caused by: java.util.jar.JarException: Cannot parse file:/C:/Documents%20and%20Settings/brahim%20%20chami/Bureau/Project%233/hellman/build/classes/ at javax.crypto.SunJCE_c.a(DashoA13*..) at javax.crypto.SunJCE_b.b(DashoA13*..) at javax.crypto.SunJCE_b.a(DashoA13*..) ... 3 more Java Result: 1

  Read the article

• Python urllib3 and how to handle cookie support?

  - by bigredbob

  So I'm looking into urllib3 because it has connection pooling and is thread safe (so performance is better, especially for crawling), but the documentation is... minimal to say the least. urllib2 has build_opener so something like: #!/usr/bin/python import cookielib, urllib2 cj = cookielib.CookieJar() opener = urllib2.build_opener(urllib2.HTTPCookieProcessor(cj)) r = opener.open("http://example.com/") But urllib3 has no build_opener method, so the only way I have figured out so far is to manually put it in the header: #!/usr/bin/python import urllib3 http_pool = urllib3.connection_from_url("http://example.com") myheaders = {'Cookie':'some cookie data'} r = http_pool.get_url("http://example.org/", headers=myheaders) But I am hoping there is a better way and that one of you can tell me what it is. Also can someone tag this with "urllib3" please.

  Read the article

< Previous Page | 290 291 292 293 294 295 296 297 298 299 300 301  | Next Page >