Search Results

Search found 25706 results on 1029 pages for 'issue tracking'.

Page 305/1029 | < Previous Page | 301 302 303 304 305 306 307 308 309 310 311 312  | Next Page >

  • Strange rare out-of-order data received using Indy

    - by Jim
    We're having a bizarre problem with Indy10 where two large strings (a few hundred characters each) that we send out one after the other are appearing at the other end intertwined oddly. This happens extremely infrequently. Each string is a complete XML message terminated with a LF and in general the READ process reads an entire XML message, returning when it sees the LF. The call to actually send the message is protected by a critical section around the call to the IOHandler's writeln method and so it is not possible for two threads to send at the same time. (We're certain the critical section is implemented/working properly). This problem happens very rarely. The symptoms are odd...when we send string A followed by string B what we received at the other end (on the rare occasions where we have failure) is the trailing section of string A by itself (i.e., there's a LF at the end of it) followed by the leading section of string A and then the entire string B followed by a single LF. We've verified that the "timed out" property is not true after the partial read - we log that property after every read that returns content. Also, we know there are no embedded LF characters in the string, as we explicitly replace all non-alphanumeric characters in the string with spaces before appending the LF and sending it. We have log mechanisms inside the critical sections on both the transmission and receiving ends and so we can see this behavior at the "wire". We're completely baffled and wondering (although always the lowest possibility) whether there could be some low-level Indy issues that might cause this issue, e.g., buffers being sent in the wrong order....very hard to believe this could be the issue but we're grasping at straws. Does anyone have any bright ideas?

    Read the article

  • Running JIRA on a VM

    - by Peter Kahn
    Anyone have any success or failure running Jira on a VM? I am setting up a new source control and defect tracking server. My server room is near full and my services group suggested a VM. I saw that a bunch of people are running SVN on VM (including NCSA). The VM would also free me from hardware problems and give me high availability. Finally, it frees me from some red tape and it can be implemented faster. So, does anyone know of any reason why I shouldn't put Jira on a VM? Thanks

    Read the article

  • ASP.NET MVC & Detached Entity won't save

    - by Justin
    Hey all, I have an ASP.NET MVC POST action for saving an entity on submit of a form. It works fine for insert but doesn't work for update, the database doesn't get called, so it's clearly not tracking the changes, as it's "detached". I'm using Entity Framework w/.NET 4: //POST: /Developers/Save/ [AcceptVerbs(HttpVerbs.Post)] public ActionResult Save(Developer developer) { developer.UpdateDate = DateTime.Now; if (developer.DeveloperID == 0) {//inserting new developer. DataContext.DeveloperData.Insert(developer); } //save changes - TODO: doesn't update... DataContext.SaveChanges(); //redirect to developer list. return RedirectToAction("Index"); } Any ideas would be greatly appreciated, thanks, Justin

    Read the article

  • complex sql which runs extremely slow when the query has order by clause

    - by basit.
    I have following complex query which I need to use. When I run it, it takes 30 to 40 seconds. But if I remove the order by clause, it takes 0.0317 sec to return the result, which is really fast compare to 30 sec or 40. select DISTINCT media.* , username from album as album , album_permission as permission , user as user, media as media where ((media.album_id = album.album_id and album.private = 'yes' and album.album_id = permission.album_id and (permission.email = '' or permission.user_id = '') ) or (media.album_id = album.album_id and album.private = 'no' ) or media.album_id = '0' ) and media.user_id = user.user_id and media.media_type = 'video' order by media.id DESC LIMIT 0,20 The id on order by is primary key which is indexed too. So I don't know what is the problem. I also have album and album permission table, just to check if media is public or private, if private then check if user has permission or not. I was thinking maybe that is causing the issue. What if I did this in sub query, would that work better? Also can someone help me write that sub query, if that is the solution? If you can't help write it, just at least tell me. I'm really going crazy with this issue.. SOLUTION MAYBE Yes, I think sub-query would be best solution for this, because the following query runs at 0.0022 seconds. But I'm not sure if validation of an album would be accurate or not, please check. select media.*, username from media as media , user as user where media.user_id = user.user_id and media.media_type = 'video' and media.id in (select media2.id from media as media2 , album as album , album_permission as permission where ((media2.album_id = album.album_id and album.private = 'yes' and album.album_id = permission.album_id and (permission.email = '' or permission.user_id = '')) or (media.album_id = album.album_id and album.private = 'no' ) or media.album_id = '0' ) and media.album_id = media2.album_id ) order by media.id DESC LIMIT 0,20

    Read the article

  • AdMob ad in iPhone app makes App content disappear when "done" is pressed!

    - by nephilite
    Hello All, When I return from an adMob ad by hitting "done" the content of my app has disappeared ! All that remains is a background image I had attached directly to the main window. Oddly I can still hear the result of my touch events from my main screen (which is now gone). This may be related to the issue some people have had regarding a 20 pixel move involving the toolbar...I see something to that effect as the ad starts to overlay. I have admob in another app that is working fine, and I notice when the ad opens in that app the ad content fills the whole screen EXCEPT the top toolbar (it starts right under it). In the new app I'm working on right now this isn't the case. When the ad starts to open I see the tool bar vanish, then the add comes in and fills the entire screen (including the area where the tool bar was); then when I click done and the the ad goes away everything under it is gone as well. It may be worth noting that the App I had working was 2.x and the current app is 3.x (and thus using the admob 3.0 libraries). This is very odd and deal-breaking; I need help ASAP The relevant part of my view hierarchy is as follows: AppDelegate - ViewController - MainView (Ad is in here) There are also some other Views that are children of the ViewController and a UITabbar is also a subview of the ViewController (programmatically declared, not a UITabBar Controller). Any help you can offer would be extremely appreciate...I need to resolve this issue ASAP, release in two days! Thanks!!

    Read the article

  • Determine the ContentObserver

    - by tommieb75
    I have this content observer that is watching on the Call Log: public class monitorCallLog extends ContentObserver{ private static final String TAG = "monitorCallLog"; public monitorCallLog(Handler handler) { super(handler); // TODO Auto-generated constructor stub } @Override public boolean deliverSelfNotifications() { return false; } @Override public void onChange(boolean selfChange){ Log.v(TAG, "[onChange] *** ENTER ***"); super.onChange(selfChange); // Code goes in here to handle the job of tracking.... Log.v(TAG, "[onChange] *** LEAVE ***"); } } Now... how can I determine the nature of the change on this URI content://call_log/calls? I want to check on it if a deletion has occurred on the said URI... but there is no way of knowing...this seems to apply on a query/delete/insert/update on said URI that triggers the onChange method.... any tips/suggestions?

    Read the article

  • Create a virtual serial port for widcomm stack under 32feet

    - by i13m
    Hi, all Currently I am doing a project involves a bluetooth communication setup between a PDA and a small embedded device. This small embedded device can only be communicated with a virtual serial port over a bluetooth link. The PDA is the ipaq running with windows mobile 6, and I am using c#. I had done a program which can communication with the serial port over bluetooth. But the only issue is every time I run this program, I have to active the bluetooth radio, and manually pairing this device with the pda via the bluetooth manager. What I want to do is when running this program, it can establish the bluetooth connection between the pda and the embedded module. So I am using functions from the 32feet prject. This is one issue is I cant make the virutal serial port part, as I think the 32feet project can only make virual serial ports for the window bluetooth stack but not the widcomm bluetooth stact, which the ipaq is using. Therefore, are there any existing c# classes or stacks that can make virtual serial port under widcomm for windows mobile 6. Thanks

    Read the article

  • Converting Milliseconds to Timecode

    - by Jeff
    I have an audio project I'm working on using BASS from Un4seen. This library uses BYTES mainly but I have a conversion in place that let's me show the current position of the song in Milliseconds. Knowing that MS = Samples * 1000 / SampleRate and that Samples = Bytes * 8 / Bits / Channels So here's my main issue and it's fairly simple... I have a function in my project that converts the Milliseconds to TimeCode in Mins:Secs:Milliseconds. Public Function ConvertMStoTimeCode(ByVal lngCurrentMSTimeValue As Long) ConvertMStoTimeCode = CheckForLeadingZero(Fix(lngCurrentMSTimeValue / 1000 / 60)) & ":" & _ CheckForLeadingZero(Int((lngCurrentMSTimeValue / 1000) Mod 60)) & ":" & _ CheckForLeadingZero(Int((lngCurrentMSTimeValue / 10) Mod 100)) End Function Now the issue comes within the Seconds calculation. Anytime the MS calculation is over .5 the seconds place rounds up to the next second. So 1.5 seconds actually prints as 2.5 seconds. I know for sure that using the Int conversion causes a round down and I know my math is correct as I've checked in a calculator 100 times. I can't figure out why the number is rounding up. Any suggestions?

    Read the article

  • Debugging SQL Server Slowness: Same Database, Different Servers

    - by Craig Walker
    For a while now we've been having anecdotal slowness on our newly-minted (VMWare-based) SQL Server 2005 database servers. Recently the problem has come to a head and I've started looking for the root cause of the issue. Here's the weird part: on the stored procedure that I'm using as a performance test case, I get a 30x difference in the execution speed depending on which DB server I run it on. This is using the same database (mdf) and log (ldf) files, detached, copied, and reattached from the slow server to the fast one. This doesn't appear to be a (virtualized) hardware issue: he slow server has 4x the CPU capacity and 2x the memory as the fast one. As best as I can tell, the problem lies in the environment/configuration of the servers (either operating system or SQL Server installation). However, I've checked a bunch of variables (SQL Server config options, running services, disk fragmentation) and found nothing that has made a difference in testing. What things should I be looking at? What tools can I use to investigate why this is happening?

    Read the article

  • Javascript "Member not found" error in IE8

    - by Steven
    I'm trying to debug the following block of Javascript code to see what the issue is. I'm getting an error that says "Member not found" on the line constructor = function() { in the extend:function() method. I'm not very good with Javascript, and I didn't write this, so I'm kind of lost on what the issue is. The error only occurs in IE8, it works fine in IE7 and Firefox. var Class = { create: function() { return function() { if(this.destroy) Class.registerForDestruction(this); if(this.initialize) this.initialize.apply(this, arguments); } }, extend: function(baseClassName) { constructor = function() { var i; this[baseClassName] = {} for(i in window[baseClassName].prototype) { if(!this[i]) this[i] = window[baseClassName].prototype[i]; if(typeof window[baseClassName].prototype[i] == 'function') { this[baseClassName][i] = window[baseClassName].prototype[i].bind(this); } } if(window[baseClassName].getInheritedStuff) { window[baseClassName].getInheritedStuff.apply(this); } if(this.destroy) Class.registerForDestruction(this); if(this.initialize) this.initialize.apply(this, arguments); } constructor.getInheritedStuff = function() { this[baseClassName] = {} for(i in window[baseClassName].prototype) { if(!this[i]) this[i] = window[baseClassName].prototype[i]; if(typeof window[baseClassName].prototype[i] == 'function') { this[baseClassName][i] = window[baseClassName].prototype[i].bind(this); } } if(window[baseClassName].getInheritedStuff) { window[baseClassName].getInheritedStuff.apply(this); } } return constructor; }, objectsToDestroy : [], registerForDestruction: function(obj) { if(!Class.addedDestructionLoader) { Event.observe(window, 'unload', Class.destroyAllObjects); Class.addedDestructionLoader = true; } Class.objectsToDestroy.push(obj); }, destroyAllObjects: function() { var i,item; for(i=0;item=Class.objectsToDestroy[i];i++) { if(item.destroy) item.destroy(); } Class.objectsToDestroy = null; } }

    Read the article

  • jQuery AJAX call not working in Webkit

    - by Brian
    I've run into a strange issue with Webkit based browsers (both Safari and Chrome - I'm testing on a Mac) and I am not sure what is causing it. Here's a small script I've created that replicates the issue: <html> <head> <script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.4.2/jquery.min.js"></script> <script type="text/javascript" language="javascript"> function doRequest() { document.test.submit(); $.ajax({ type: "GET", cache: false, url: 'ajax.php?tmp=1', success: doSuccess }); } function doSuccess(t_data,t_status,req) { alert('Data is: '+ t_data +', XMLHTTPRequest status is: '+ req.status); } </script> </head> <body> <form name="test" method="post" action="ajax.html" enctype="multipart/form-data"> <input type="file" name="file_1"> <br><input type="button" value="upload" onclick="doRequest();"> </form> </body> </html> ajax.php is: <?php echo $_REQUEST['tmp']; ?> This works as is on Firefox, but the XMLHTTPRequest status is always "0" on both Safari and Chrome. If I remove this line: document.test.submit(); then it works, but of course the form is not submitted. I've tried changing the form submit button from "button" to "submit", but that also prevents it from working on Safari or Chrome. What I am trying to accomplish is: submit the form call another script to get status on the file being uploaded via the form (it's for a small upload progress meter). Any help is really appreciated - I'm hopeful it is just a quirk I'm not familiar with. Thanks! Brian

    Read the article

  • Losing Session between Classic ASP and ASP.NET

    - by Aaron
    The company that I work for is making a transition between classic ASP programs and ASP.NET programs for our intranet software. Eventually, everything will be written in ASP.NET, but because of time constraints, there are still a number of programs that use classic ASP. To compensate we've written features that allow for redirects and autologins between classic ASP programs and ASP.NET programs. I've been starting to see a problem, though, with holding the session state for our ASP.NET software. If a user uses an ASP.NET program, then does work in a classic ASP program, then goes back to that ASP.NET program, often times, the user's authentication for the ASP.NET program is still in place, yet the user's session is lost, resulting in an error whenever a function is performed within the program. I'm trying to capture the loss of the session state in global.asax's Session_End event, which would redirect the user to the login page, but that hasn't worked. Has anyone else faced a similar issue with users moving back and forth between classic ASP and ASP.NET and losing sessions? Is that even my real issue here? It's the only thing that I can see as being a problem. Thanks for any help.

    Read the article

  • WCF Message Debugging on WebHttpBehavior

    - by Programming Hero
    I've created a custom binding in WCF for a custom MessageEncoder to allow messages to be written as XML using a wider range of encodings than WCF supports out of the box. The encoder appears to be working and I am able to send and receive messages, but I want to verify that the XML message being written is exactly as required by the service I am trying to consume. I've turned on message logging for WCF using the diagnostic trace listeners to output the messages sent and received over the wire to a log file. Unfortunately, for calls using my encoder, the message is displayed as ... stream ... EDIT: I don't think it's anything to do with my custom encoding. I have experimented with my custom binding a little, switching to using the built-in text encoding and http transport. I still don't get a message body logged in the message trace. EDIT2: Having done further investigation, the issue looks to be related not to the custom binding, but the custom behaviour. I'm apply the <webHttp/> behaviour. Once this is specified (along with manual addressing), the tracing behaviour shows up. Is this a known issue with WebHttpBehavior? Am I still barking up the wrong tree?

    Read the article

  • Rails apps blew up on mediatemple's (dv) server

    - by BandsOnABudget
    i managed to fix this issue but i wanted to document it here for any others whom might have similar problems. I'm running a mediatemple (dv) rage server. monit started sending me alerts that i was having resource limitations on the server. logged into plesk and the CPU was pinned at 99.9%. Rebooted the server, catastrophe avoided... Not quite - all my rails apps were not loading My Setup ruby 1.8.6 Rails 2.3.5 w/ passenger installed as an apache module. I noticed a defunct ruby process so i killed and rebooted the server but runby continued to come back as defunct. Started trolling thru the apache log and i saw errors irt updating rubygems. i updated to the latest but then continued to get gem errors. Basically, I had to go thru all my apps and update any gems manually, reboot apache, and all was restored. Not really sure the cause of the issue but wanted to note it for posterity. Anybody else in the community ever have similar issues???

    Read the article

  • IE7 - visited links revert to unvisted after page refresh

    - by Gerald
    Hello, A number of our users have just upgraded from IE6 to IE7. the upgreaded users are reporting an issue with visited links reverting to their unvisited color after a page refresh. This only happens to links that are using javascript instead of a hard coded URL: <script lang="JavaScript"> <!-- function LoadGoogle() { var LoadGoogle = window.open('http://www.google.com'); } --> </script> <a href="javascript:LoadGoogle()">Google using javascript</a> <a href="#" OnClick="javascript:LoadGoogle()">Google using javascript OnClick</a> The above links will revert back to the unvisited color whenever the page is refreshed. It doesn't matter if the page is refreshed because of a post back, manually hitting the refresh or f5 button, or from an auto-refresh function. Please note, the above code is an over simplification of what is actually happening, but I believe it illustrates the issue well enough. This is causing a problem for our users because we are providing them with a list of items that are all opened into new windows via javascript when they are clicked; and refresh the parent page when the users are finished with them. Each time the parent page is refreshed all of these links revert back to their unvisited color, so our users are losing track of which items they've worked on. I've been digging around and it looks like this is intended behavior. IE7 doesn't register these links with the browsers history. Does anyone know a work around that will allow us to keep these javascript links in the visited state without having to do a major overhaul of the apps code? Thank you.

    Read the article

  • What advantages does TFS 2010 have over Axosoft OnTime?

    - by Russell
    I am currently creating a business case for rolling out TFS 2010 as our source control and bug/release management tool. We currently use OnTime for our bug tracking software and subversion for our SCM. I was wondering what advantages TFS 2010 has over OnTime? I have done some thinking so far and would love to hear responses: TFS 2010 allows linking changesets-work items-builds TFS 2010 provides greater customisation of workflow than OnTime TFS 2010 is integrated into the Visual Studio IDE - This requires less apps to be open and less window flicking Thanks in advance.

    Read the article

  • Duration of Excessive GC Time in "java.lang.OutOfMemoryError: GC overhead limit exceeded"

    - by jilles de wit
    Occasionally, somewhere between once every 2 days to once every 2 weeks, my application crashes in a seemingly random location in the code with: java.lang.OutOfMemoryError: GC overhead limit exceeded. If I google this error I come to this SO question and that lead me to this piece of sun documentation which expains: The parallel collector will throw an OutOfMemoryError if too much time is being spent in garbage collection: if more than 98% of the total time is spent in garbage collection and less than 2% of the heap is recovered, an OutOfMemoryError will be thrown. This feature is designed to prevent applications from running for an extended period of time while making little or no progress because the heap is too small. If necessary, this feature can be disabled by adding the option -XX:-UseGCOverheadLimit to the command line. Which tells me that my application is apparently spending 98% of the total time in garbage collection to recover only 2% of the heap. But 98% of what time? 98% of the entire two weeks the application has been running? 98% of the last millisecond? I'm trying to determine a best approach to actually solving this issue rather than just using -XX:-UseGCOverheadLimit but I feel a need to better understand the issue I'm solving.

    Read the article

  • android compile error: could not reserve enough space for object heap

    - by moonlightcheese
    I'm getting this error during compilation: Error occurred during initialization of VM Could not create the Java virtual machine. Could not reserve enough space for object heap What's worse, the error occurs intermittently. Sometimes it happens, sometimes it doesn't. It seems to be dependent on the amount of code in the application. If I get rid of some variables or drop some imported libraries, it will compile. Then when I add more to it, I get the error again. I've included the following sources into the application in the [project_root]/src/ directory: org.apache.httpclient (I've stripped all references to log4j from the sources, so don't need it) org.apache.codec (as a dependency) org.apache.httpcore (dependency of httpclient) and my own activity code consisting of nothing more than an instance of HttpClient. I know this has something to do with the amount of memory necessary during compile time or some compiler options, and I'm not really stressing my system while i'm coding. I've got 2GB of memory on this Core Duo laptop and windows reports only 860MB page file usage (haven't used any other memory tools. I should have plenty of memory and processing power for this... and I'm only compiling some common http libs... total of 406 source files. What gives? edit (4/30/2010-18:24): Just compiled some code where I got the above stated error. I closed some web browser windows and recompiled the same exact code with no edits and it compiled with no issue. this is definitely a compiler issue related to memory usage. Any help would be great.... because I have no idea where to go from here. Android API Level: 5 Android SDK rel 5 JDK version: 1.6.0_12 Sorry I had to repost this question because regardless of whether I use the native HttpClient class in the Android SDK or my custom version downloaded from apache, the error still occurs.

    Read the article

  • How do I compress a Json result from ASP.NET MVC with IIS 7.5

    - by Gareth Saul
    I'm having difficulty making IIS 7 correctly compress a Json result from ASP.NET MVC. I've enabled static and dynamic compression in IIS. I can verify with Fiddler that normal text/html and similar records are compressed. Viewing the request, the accept-encoding gzip header is present. The response has the mimetype "application/json", but is not compressed. I've identified that the issue appears to relate to the MimeType. When I include mimeType="*/*", I can see that the response is correctly gzipped. How can I get IIS to compress WITHOUT using a wildcard mimeType? I assume that this issue has something to do with the way that ASP.NET MVC generates content type headers. The CPU usage is well below the dynamic throttling threshold. When I examine the trace logs from IIS, I can see that it fails to compress due to not finding a matching mime type. <httpCompression directory="%SystemDrive%\inetpub\temp\IIS Temporary Compressed Files" noCompressionForProxies="false"> <scheme name="gzip" dll="%Windir%\system32\inetsrv\gzip.dll" /> <dynamicTypes> <add mimeType="text/*" enabled="true" /> <add mimeType="message/*" enabled="true" /> <add mimeType="application/x-javascript" enabled="true" /> <add mimeType="application/json" enabled="true" /> </dynamicTypes> <staticTypes> <add mimeType="text/*" enabled="true" /> <add mimeType="message/*" enabled="true" /> <add mimeType="application/x-javascript" enabled="true" /> <add mimeType="application/atom+xml" enabled="true" /> <add mimeType="application/xaml+xml" enabled="true" /> <add mimeType="application/json" enabled="true" /> </staticTypes> </httpCompression>

    Read the article

  • Timeout reading verity collection - CF8

    - by Gary
    For a long time now I've been having a problem with using the verity search service bundled with ColdFusion 8. The issue is with timeout errors occurring when perfoming any operation on a collection. It's intermittent, and usually occurs after a few operations have been successfully performed. For instance: If I'm adding records to a collection the first, say 15 records, will go through with no problems, but all subsequent records will timeout until the service is rebooted. I'm on a shared server, Windows 2008, 64bit as far as I know. The error I receive is: "An error occurred while performing an operation in the Search Engine library. Error reading collection information.: com.verity.api.administration.ConfigurationException: java.io.IOException: Read timed out" Having spoken to my hosting company, and after doing some research, it's been suggested that the number of collections on a server may cause this issue. I've reduced the amount of collections I use, and there are currently 39 collections on the server. As I'm on a shared server, I have no control over how many collections other customers use, however I've read that the limit is 128 collections, so I don't see why 39 should cause it to become unusable. The collections aren't big, there's maybe around 5,000 records between all of them. Any ideas?

    Read the article

  • Daylight saving time - do and don'ts

    - by Oded
    I am hoping to make this question and the answers to it the definitive guide to dealing with daylight saving time, in particular for dealing with the actual change overs. Many systems are dependent on keeping accurate time, the problem is with changes to time due to daylight savings - moving the clock forward or backwards. For instance, one has business rules in an order taking system that depend on the time of the order - if the clock changes, the rules might not be as clear. How should the time of the order be persisted? There is of course an endless number of scenarios - this one is simply an illustrative one. How have you dealt with the daylight saving issue? What assumptions are part of your solution? (looking for context here) As important, if not more so: What did you try that did not work? Why did it not work? I would be interested in programming, OS, data persistence and other pertinent aspects of the issue. General answers are great, but I would also like to see details especially if they are only available on one platform.

    Read the article

  • XMLBeans - xsi:type stripped using Axis2 and Tomcat?

    - by Matthew Gamble
    I’m new to XMLBeans and have been trying to use it to create an XML document as part of an axis2 web service. When I run my code as a standard Java application or as a standard servlet, the XML is correctly generated: <?xml version="1.0" encoding="UTF-8"?> <c:BroadsoftDocument protocol="OCI" xmlns:c="C"> <sessionId>000000001</sessionId> <command xsi:type="AuthenticationRequest" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <userId>admin</userId></command> </c:BroadsoftDocument> However, when the exact same code is run under Axis2 & Tomcat in a servlet I get: <?xml version="1.0" encoding="UTF-8"?> <c:BroadsoftDocument protocol="OCI" xmlns:c="C"> <sessionId>000000001</sessionId> <command> <userId>admin</userId></command> </c:BroadsoftDocument> This of course isn’t valid – the xsi:type of the “command” element is stripped when the code is run under Tomcat. Does anyone have any suggestions of what I could be doing wrong that would cause this type of issue only when running under Axis2? At first I thought it was a Tomcat issue, but after creating a generic servlet and running the exact same code I don't have any issues. I've tried playing with the XMLOptions for XMLBeans, but couldn't seem to resolve the problem. The options I'm currently using are: xmlOptions = new XmlOptions(); xmlOptions.setCharacterEncoding("UTF-8"); xmlOptions.setUseDefaultNamespace(); xmlOptions.setSaveAggressiveNamespaces(); xmlOptions.setSavePrettyPrint();

    Read the article

  • How do I correctly install dulwich to get hg-git working on Cygwin?

    - by Erik Vold
    I have a similar issue as in this issue, but in my case I am trying to use cygwin. First I followed the instructions here, and I ran: $ easy_install hg-git The I created ~/.hgrc, with: [extensions] hgext.bookmarks = hggit = Then when I typed 'hg' at a command prompt, I'd see: "* failed to import extension hggit: No module named hggit" So I did a search for "hggit" and found /cygdrive/c/Python26/Lib/site-packages/hg_git-0.2.1-py2.6.egg/hggit, so I updated .hgrc: [extensions] hgext.bookmarks = hggit = /cygdrive/c/Python26/Lib/site-packages/hg_git-0.2.1-py2.6.egg/hggit Then when I type 'hg' I get "No module named dulwich.errors" If you read this question, it's the same problem. In python shell I cannot import dulwich: >>> import dulwich Traceback (most recent call last): File "<stdin>", line 1, in <module> ImportError: No module named dulwich I checked out my easy-install.pth and it does contain the dulwich egg: import sys; sys.__plen = len(sys.path) ./hg_git-0.2.1-py2.6.egg ./dulwich-0.5.0-py2.6-win32.egg import sys; new=sys.path[sys.__plen:]; del sys.path[sys.__plen:]; p=getattr(sys,'__egginsert',0); sys.path[p:p]=new; sys.__egginsert = p+len(new) So how can I fix this so that import dulwich works, which should fix my problem using hg-git I assume..

    Read the article

  • Hiding a UINavigationController's UIToolbar during viewWillDisappear:

    - by Nathan de Vries
    I've got an iPhone application with a UITableView menu. When a row in the table is selected, the appropriate view controller is pushed onto the application's UINavigationController stack. My issue is that the MenuViewController does not need a toolbar, but the UIViewControllers which are pushed onto the stack do. Each UIViewController that gets pushed calls setToolbarHidden:animated: in viewDidAppear:. To hide the toolbar, I call setToolbarHidden:animated: in viewWillDisappear:. Showing the toolbar works, such that when the pushed view appears the toolbar slides up and the view resizes correctly. However, when the back button is pressed the toolbar slides down but the view does not resize. This means that there's a black strip along the bottom of the view as the other view transitions in. I've tried adding the toolbar's height to the height of the view prior to hiding the toolbar, but this causes the view to be animated during the transition so that there's still a black bar. I realise I can manage my own UIToolbar, but I'd like to use UINavigationControllers built in UIToolbar for convenience. This forum post mentions the same issue, but no workaround is mentioned.

    Read the article

  • ASP.NET Chart Control errors in Event Viewer

    - by Richard Reddy
    Hi, I have been using the ASP.NET chart controls for a while on win2k3 (32bit) setups without any issue but have noticed that on our new win2k8 (64bit) box I am getting a warning message showing up in the event viewer from the chart control. In my web.config file I have the following tag telling the Chart Control where I can store the Temp Files: <add key="ChartImageHandler" value="storage=file;timeout=20;dir=c:\TempImageFiles\;" /> Below is the warning message produced by the control: Event code: 3005 Event message: An unhandled exception has occurred. Event time: 10/7/2009 2:40:03 PM Event time (UTC): 10/7/2009 2:40:03 PM Event ID: 237c3b208962429e8bbc5a48ffd177f0 Event sequence: 2860 Event occurrence: 26 Event detail code: 0 Application information: Application domain: /LM/W3SVC/2/ROOT-1-128993655360497729 Trust level: Full Application Virtual Path: / Application Path: C:\data\sites\mydomain.com\ Machine name: 231692-WEB Process information: Process ID: 4068 Process name: w3wp.exe Account name: NT AUTHORITY\NETWORK SERVICE Exception information: Exception type: ArgumentException Exception message: The image is not found. Request information: Request URL: http://www.mydomain.com/ChartImg.axd?i=chart%5F0%5F3.png&g=bccc8aa11abb470980c60e8cf1e71e15 Request path: /ChartImg.axd User host address: my domain ip User: Is authenticated: False Authentication Type: Thread account name: NT AUTHORITY\NETWORK SERVICE Thread information: Thread ID: 7 Thread account name: NT AUTHORITY\NETWORK SERVICE Is impersonating: False Stack trace: at System.Web.UI.DataVisualization.Charting.ChartHttpHandler.ProcessSavedChartImage(HttpContext context) at System.Web.UI.DataVisualization.Charting.ChartHttpHandler.System.Web.IHttpHandler.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) It's worth pointing out that ALL of the chart images are displayed correctly on the screen so I'm not sure when/where the image not found error is being caused. Is this a 64bit issue? Thanks, Rich

    Read the article

< Previous Page | 301 302 303 304 305 306 307 308 309 310 311 312  | Next Page >