Search Results

Search found 10004 results on 401 pages for 'thread pool'.

Page 366/401 | < Previous Page | 362 363 364 365 366 367 368 369 370 371 372 373  | Next Page >

  • String Sharing/Reference issue with objects in Delphi

    - by jenakai123
    My application builds many objects in memory based on filenames (among other string based information). I was hoping to optimise memory usage by storing the path and filename separately, and then sharing the path between objects in the same path. I wasn't trying to look at using a string pool or anything, basically my objects are sorted so if I have 10 objects with the same path I want objects 2-10 to have their path "pointed" at object 1's path (eg object[2].Path=object[1].Path); I have a problem though, I don't believe that my objects are in fact sharing a reference to the same string after I think I am telling them to (by the object[2].Path=object[1].Path assignment). When I do an experiment with a string list and set all the values to point to the first value in the list I can see the "memory conservation" in action, but when I use objects I see absolutely no change at all, admittedly I am only using task manager (private working set) to watch for memory use changes. Here's a contrived example, I hope this makes sense. I have an object: TfileObject=class(Tobject) FpathPart: string; FfilePart: string; end; Now I create 1,000,000 instances of the object, using a new string for each one: var x: integer; MyFilePath: string; fo: TfileObject; begin for x := 1 to 1000000 do begin // create a new string for every iteration of the loop MyFilePath:=ExtractFilePath(Application.ExeName); fo:=TfileObject.Create; fo.FpathPart:=MyFilePath; FobjectList.Add(fo); end; end; Run this up and task manager says I am using 68MB of memory or something. (Note that if I allocated MyFilePath outside of the loop then I do save memory because of 1 instance of the string, but this is a contrived example and not actually how it would happen in the app). Now I want to "optimise" my memory usage by making all objects share the same instance of the path string, since it's the same value: var x: integer; begin for x:=1 to FobjectList.Count-1 do begin TfileObject(FobjectList[x]).FpathPart:=TfileObject(FobjectList[0]).FpathPart; end; end; Task Manager shows absouletly no change. However if I do something similar with a TstringList: var x: integer; begin for x := 1 to 1000000 do begin FstringList.Add(ExtractFilePath(Application.ExeName)); end; end; Task Manager says 60MB memory use. Now optimise with: var x: integer; begin for x := 1 to FstringList.Count - 1 do FstringList[x]:=FstringList[0]; end; Task Manager shows the drop in memory usage that I would expect, now 10MB. So I seem to be able to share strings in a string list, but not in objects. I am obviously missing something conceptually, in code or both! I hope this makes sense, I can really see the ability to conserve memory using this technique as I have a lot of objects all with lots of string information, that data is sorted in many different ways and I would like to be able to iterate over this data once it is loaded into memory and free some of that memory back up again by sharing strings in this way. Thanks in advance for any assistance you can offer.

    Read the article

  • HttpWebRequest and Ignoring SSL Certificate Errors

    - by Rick Strahl
    Man I can't believe this. I'm still mucking around with OFX servers and it drives me absolutely crazy how some these servers are just so unbelievably misconfigured. I've recently hit three different 3 major brokerages which fail HTTP validation with bad or corrupt certificates at least according to the .NET WebRequest class. What's somewhat odd here though is that WinInet seems to find no issue with these servers - it's only .NET's Http client that's ultra finicky. So the question then becomes how do you tell HttpWebRequest to ignore certificate errors? In WinInet there used to be a host of flags to do this, but it's not quite so easy with WebRequest. Basically you need to configure the CertificatePolicy on the ServicePointManager by creating a custom policy. Not exactly trivial. Here's the code to hook it up: public bool CreateWebRequestObject(string Url) {    try     {        this.WebRequest =  (HttpWebRequest) System.Net.WebRequest.Create(Url);         if (this.IgnoreCertificateErrors)            ServicePointManager.CertificatePolicy = delegate { return true; };}One thing to watch out for is that this an application global setting. There's one global ServicePointManager and once you set this value any subsequent requests will inherit this policy as well, which may or may not be what you want. So it's probably a good idea to set the policy when the app starts and leave it be - otherwise you may run into odd behavior in some situations especially in multi-thread situations.Another way to deal with this is in you application .config file. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} <configuration>   <system.net>     <settings>       <servicePointManager           checkCertificateName="false"           checkCertificateRevocationList="false"                />     </settings>   </system.net> </configuration> This seems to work most of the time, although I've seen some situations where it doesn't, but where the code implementation works which is frustrating. The .config settings aren't as inclusive as the programmatic code that can ignore any and all cert errors - shrug. Anyway, the code approach got me past the stopper issue. It still amazes me that theses OFX servers even require this. After all this is financial data we're talking about here. The last thing I want to do is disable extra checks on the certificates. Well I guess I shouldn't be surprised - these are the same companies that apparently don't believe in XML enough to generate valid XML (or even valid SGML for that matter)...© Rick Strahl, West Wind Technologies, 2005-2011Posted in .NET  CSharp  HTTP  

    Read the article

  • How To Configure Remote Desktop To Hyper-V Guest Virtual Machines

    - by Brian Jackett
    Configuring Remote Desktop (RDP) from a host Hyper-V machine to a guest virtual machine can be tricky, so this post is dedicated to the issues and resolution steps I went through to allow RDP.  Cutting to the point, below are the things to look for followed by some explanation about my scenario if you care to read.  This is not an exhaustive list of what is required, just the items that were causing problems for my particular scenario. Requirements Allow Remote Desktop Connections in guest OS. The network adapter type must allow communication with host machine (e.g. use an “Internal” virtual adapter.) If running Server 2008 R2 on guest, network discovery mode must be turned on. If running Server 2008 R2 on guest, the services supporting network discovery mode must be running: - DNS Client - Function Discovery Resource Publication - SSDP Discovery - UPnP Device Host My Environment     A quick word about my environment.  I am running Windows Server 2008 R2 with Hyper V on my laptop and numerous guest VMs running Windows Server 2003 R2 or Windows Server 2008 R2.  I run a domain controller VM and then 1 or 2 SharePoint servers depending on my work needs.  I’ve found this setup to work well except when it comes to the display window for my VMs. The Issue     Ever since I began running Hyper-V I haven’t been able to RDP to my guest VMs which means the resolution for my connection windows ha been limited to what the native Hyper-V connections allow.  During personal use I can put the resolution up to 1152 x 864, but during presentations I am usually limited to a measly 800 x 600.  That is until today when I decided to fully investigate why I couldn’t connect via RDP.     First a thank you to John Ross (@johnrossjr), Christina Wheeler (@cwheeler76) and Clayton Cobb (@warrtalon) for various suggestions while I was researching tonight.  As it turns out I had not 1, not 2, but 3 items preventing me from using RDP.  Let’s dig into the requirements above. Allow RDP Connection     This item I had previously taken care of, but it bears repeating because by default Windows Server 2008 R2 does not allow RDP connections.  Change the setting from “Don’t allow…” to whichever “Allow connections…” setting suits your needs.  I chose the less secure option as this is just my dev laptop. Network Adapter Type     When I originally configured my VMs I configured each to use 2 network adapters: one using the physical ethernet adapter for internet use and a virtual private adapter for communication between the VMs.  The connection for the ethernet adapter is an "”External” adapter and thus doesn’t connect between the host and guest.  The virtual private adapter allowed communication ONLY between the VMs and not to my host.  There is a third option “Internal” which allows communication between VMs as well as to the host.  After finding out this distinction I promptly created an Internal network adapter and assigned that to my VMs. Turn On Network Discovery     Seems like a pretty common sense thing, but in order to allow remote desktop connections the target computer must able to be found by the source computer (explained here.)  One of the settings that controls if a computer can be found on the network is aptly named Network Discovery.  By default Windows Server 2008 R2 turns Network Discovery off for security purposes.  To enable it open up the Network and Sharing Center.  Click “Change Advanced Sharing Settings” on the left.  On the following screen select “Turn on network discovery” for the currently used profile and click Save Settings.  You may notice though that your selection to turn on network discovery doesn’t save.  If this is the case then you most likely don’t have the supporting services running (as was my case.) Network Discovery Supporting Services     There are a total of 4 services (listed again below) that need to be running before you can turn on network discovery (explained here.)  The below images highlight these services.  In my guest VM I found that I had DNS Client already running while the other 3 were disabled.  I set them all to enabled and started the ones that were stopped.  After this change I returned to the Sharing settings screen and found that Network Discovery was turned on.  I’m not sure whether this was picking up my attempt to turn it on previously or if starting those services turned it on.  Either way the end result was a success. - DNS Client - Function Discovery Resource Publication - SSDP Discovery - UPnP Device Host Before and After Results     The first image is the smaller square shaped viewing window used by the Hyper-V native connection.  The second is the full-screen RDP connection in all its widescreen glory. Conclusion     Over the past few months I’ve found Hyper-V to be very useful for virtualizing my development environments, but I’ve also had a steep learning curve to get various items configured just right.  Allowing RDP connections to guest VMs was one area that I hadn’t been able to get right for the longest time.  Now that I resolved these issues I hope that others can avoid the pitfalls that I ran into.  If you know of any other items I left off feel free to let me know.        -Frog Out   Links Turning on Network Discovery http://sqlblog.com/blogs/john_paul_cook/archive/2009/08/15/remote-desktop-connection-on-windows-server-2008-r2.aspx Services required for Network Discovery http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/2e1fea01-3f2b-4c46-a631-a8db34ed4f84

    Read the article

  • SSAS: Using fake dimension and scopes for dynamic ranges

    - by DigiMortal
    In one of my BI projects I needed to find count of objects in income range. Usual solution with range dimension was useless because range where object belongs changes in time. These ranges depend on calculation that is done over incomes measure so I had really no option to use some classic solution. Thanks to SSAS forums I got my problem solved and here is the solution. The problem – how to create dynamic ranges? I have two dimensions in SSAS cube: one for invoices related to objects rent and the other for objects. There is measure that sums invoice totals and two calculations. One of these calculations performs some computations based on object income and some other object attributes. Second calculation uses first one to define income ranges where object belongs. What I need is query that returns me how much objects there are in each group. I cannot use dimension for range because on one date object may belong to one range and two days later to another income range. By example, if object is not rented out for two days it makes no money and it’s income stays the same as before. If object is rented out after two days it makes some income and this income may move it to another income range. Solution – fake dimension and scopes Thanks to Gerhard Brueckl from pmOne I got everything work fine after some struggling with BI Studio. The original discussion he pointed out can be found from SSAS official forums thread Create a banding dimension that groups by a calculated measure. Solution was pretty simple by nature – we have to define fake dimension for our range and use scopes to assign values for object count measure. Object count measure is primitive – it just counts objects and that’s it. We will use it to find out how many objects belong to one or another range. We also need table for fake ranges and we have to fill it with ranges used in ranges calculation. After creating the table and filling it with ranges we can add fake range dimension to our cube. Let’s see now how to solve the problem step-by-step. Solving the problem Suppose you have ranges calculation defined like this: CASE WHEN [Measures].[ComplexCalc] < 0 THEN 'Below 0'WHEN [Measures].[ComplexCalc] >=0 AND  [Measures].[ComplexCalc] <=50 THEN '0 - 50'...END Let’s create now new table to our analysis database and name it as FakeIncomeRange. Here is the definition for table: CREATE TABLE [FakeIncomeRange] (     [range_id] [int] IDENTITY(1,1) NOT NULL,     [range_name] [nvarchar](50) NOT NULL,     CONSTRAINT [pk_fake_income_range] PRIMARY KEY CLUSTERED      (         [range_id] ASC     ) ) Don’t forget to fill this table with range labels you are using in ranges calculation. To use ranges from table we have to add this table to our data source view and create new dimension. We cannot bind this table to other tables but we have to leave it like it is. Our dimension has two attributes: ID and Name. The next thing to create is calculation that returns objects count. This calculation is also fake because we override it’s values for all ranges later. Objects count measure can be defined as calculation like this: COUNT([Object].[Object].[Object].members) Now comes the most crucial part of our solution – defining the scopes. Based on data used in this posting we have to define scope for each of our ranges. Here is the example for first range. SCOPE([FakeIncomeRange].[Name].&[Below 0], [Measures].[ObjectCount])     This=COUNT(            FILTER(                [Object].[Object].[Object].members,                 [Measures].[ComplexCalc] < 0          )     ) END SCOPE To get these scopes defined in cube we need MDX script blocks for each line given here. Take a look at the screenshot to get better idea what I mean. This example is given from SQL Server books online to avoid conflicts with NDA. :) From previous example the lines (MDX scripts) are: Line starting with SCOPE Block for This = Line with END SCOPE And now it is time to deploy and process our cube. Although you may see examples where there are semicolons in the end of statements you don’t need them. Visual Studio BI tools generate separate command from each script block so you don’t need to worry about it.

    Read the article

  • Installing Matlab on ubuntu 12.04 32 bits

    - by Amir
    I have been trying to install Matlab2012a, matlab2012b and Matlab2013a for like 4 hours, triedto fix my prospective errors regarding the posts 2012a, Ubuntu-Matlab Documentation and Matlab-central. But either i am recieving an error while the installation GUI pops-up with the error : The application encountered an unexpected error and needs to close. You may want to try re-installing your product(s). More information can be found at /tmp/mathworks_amir.log On the other hand for 2012a. and the errors for 2012b and 2013a is : `Installing ... Exception in thread "main" com.google.inject.ProvisionException: Guice provision errors: 1) Error in custom provider, java.lang.RuntimeException: java.lang.reflect.InvocationTargetException at com.mathworks.wizard.WizardModule.provideDisplayProperties(WizardModule.java:60) while locating com.mathworks.instutil.DisplayProperties at com.mathworks.wizard.ui.components.ComponentsModule.providePaintStrategy(ComponentsModule.java:76) while locating com.mathworks.wizard.ui.components.PaintStrategy for parameter 4 at com.mathworks.wizard.ui.components.SwingComponentFactoryImpl.(SwingComponentFactoryImpl.java:110) while locating com.mathworks.wizard.ui.components.SwingComponentFactoryImpl while locating com.mathworks.wizard.ui.components.SwingComponentFactory for parameter 1 at com.mathworks.wizard.ui.WizardUIImpl.(WizardUIImpl.java:65) while locating com.mathworks.wizard.ui.WizardUIImpl while locating com.mathworks.wizard.ui.WizardUI annotated with @com.google.inject.name.Named(value=BaseWizardUI) at com.mathworks.wizard.ui.UIModule.provideWizardUI(UIModule.java:50) while locating com.mathworks.wizard.ui.WizardUI for parameter 0 at com.mathworks.wizard.ExceptionHandlerImpl.(ExceptionHandlerImpl.java:22) while locating com.mathworks.wizard.ExceptionHandlerImpl while locating com.mathworks.wizard.ExceptionHandler 1 error at com.google.inject.InjectorImpl$4.get(InjectorImpl.java:767) at com.google.inject.InjectorImpl.getInstance(InjectorImpl.java:793) at com.mathworks.wizard.WizardLauncher.startWizard(WizardLauncher.java:160) at com.mathworks.wizard.WizardLauncher.start(WizardLauncher.java:75) at com.mathworks.wizard.AbstractLauncher.launch(AbstractLauncher.java:27) at com.mathworks.wizard.AbstractLauncher.launchStandalone(AbstractLauncher.java:18) at com.mathworks.professionalinstaller.Launcher.main(Launcher.java:21) Caused by: java.lang.RuntimeException: java.lang.reflect.InvocationTargetException at com.google.inject.internal.ProviderMethod.get(ProviderMethod.java:106) at com.google.inject.InternalFactoryToProviderAdapter.get(InternalFactoryToProviderAdapter.java:48) at com.google.inject.InjectorImpl$4$1.call(InjectorImpl.java:758) at com.google.inject.InjectorImpl.callInContext(InjectorImpl.java:811) at com.google.inject.InjectorImpl$4.get(InjectorImpl.java:754) at com.google.inject.spi.ProviderLookup$1.get(ProviderLookup.java:89) at com.google.inject.spi.ProviderLookup$1.get(ProviderLookup.java:89) at com.google.inject.internal.ProviderMethod.get(ProviderMethod.java:95) at com.google.inject.InternalFactoryToProviderAdapter.get(InternalFactoryToProviderAdapter.java:48) at com.google.inject.SingleParameterInjector.inject(SingleParameterInjector.java:42) at com.google.inject.SingleParameterInjector.getAll(SingleParameterInjector.java:66) at com.google.inject.ConstructorInjector.construct(ConstructorInjector.java:84) at com.google.inject.ConstructorBindingImpl$Factory.get(ConstructorBindingImpl.java:111) at com.google.inject.FactoryProxy.get(FactoryProxy.java:56) at com.google.inject.SingleParameterInjector.inject(SingleParameterInjector.java:42) at com.google.inject.SingleParameterInjector.getAll(SingleParameterInjector.java:66) at com.google.inject.ConstructorInjector.construct(ConstructorInjector.java:84) at com.google.inject.ConstructorBindingImpl$Factory.get(ConstructorBindingImpl.java:111) at com.google.inject.FactoryProxy.get(FactoryProxy.java:56) at com.google.inject.ProviderToInternalFactoryAdapter$1.call(ProviderToInternalFactoryAdapter.java:45) at com.google.inject.InjectorImpl.callInContext(InjectorImpl.java:811) at com.google.inject.ProviderToInternalFactoryAdapter.get(ProviderToInternalFactoryAdapter.java:42) at com.google.inject.Scopes$1$1.get(Scopes.java:54) at com.google.inject.InternalFactoryToProviderAdapter.get(InternalFactoryToProviderAdapter.java:48) at com.google.inject.InjectorImpl$4$1.call(InjectorImpl.java:758) at com.google.inject.InjectorImpl.callInContext(InjectorImpl.java:811) at com.google.inject.InjectorImpl$4.get(InjectorImpl.java:754) at com.google.inject.spi.ProviderLookup$1.get(ProviderLookup.java:89) at com.google.inject.spi.ProviderLookup$1.get(ProviderLookup.java:89) at com.google.inject.internal.ProviderMethod.get(ProviderMethod.java:95) at com.google.inject.InternalFactoryToProviderAdapter.get(InternalFactoryToProviderAdapter.java:48) at com.google.inject.ProviderToInternalFactoryAdapter$1.call(ProviderToInternalFactoryAdapter.java:45) at com.google.inject.InjectorImpl.callInContext(InjectorImpl.java:811) at com.google.inject.ProviderToInternalFactoryAdapter.get(ProviderToInternalFactoryAdapter.java:42) at com.google.inject.Scopes$1$1.get(Scopes.java:54) at com.google.inject.InternalFactoryToProviderAdapter.get(InternalFactoryToProviderAdapter.java:48) at com.google.inject.SingleParameterInjector.inject(SingleParameterInjector.java:42) at com.google.inject.SingleParameterInjector.getAll(SingleParameterInjector.java:66) at com.google.inject.ConstructorInjector.construct(ConstructorInjector.java:84) at com.google.inject.ConstructorBindingImpl$Factory.get(ConstructorBindingImpl.java:111) at com.google.inject.FactoryProxy.get(FactoryProxy.java:56) at com.google.inject.ProviderToInternalFactoryAdapter$1.call(ProviderToInternalFactoryAdapter.java:45) at com.google.inject.InjectorImpl.callInContext(InjectorImpl.java:811) at com.google.inject.ProviderToInternalFactoryAdapter.get(ProviderToInternalFactoryAdapter.java:42) at com.google.inject.Scopes$1$1.get(Scopes.java:54) at com.google.inject.InternalFactoryToProviderAdapter.get(InternalFactoryToProviderAdapter.java:48) at com.google.inject.InjectorImpl$4$1.call(InjectorImpl.java:758) at com.google.inject.InjectorImpl.callInContext(InjectorImpl.java:804) at com.google.inject.InjectorImpl$4.get(InjectorImpl.java:754) ... 6 more Caused by: java.lang.reflect.InvocationTargetException at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:606) at com.google.inject.internal.ProviderMethod.get(ProviderMethod.java:101) ... 54 more Caused by: com.mathworks.instutil.JNIException: java.lang.UnsatisfiedLinkError: Can't load library: /tmp/mathworks_7417/bin/glnxa64/libinstutil.so at com.mathworks.instutil.NativeUtility.loadNativeLibrary(NativeUtility.java:39) at com.mathworks.instutil.NativeUtility.(NativeUtility.java:24) at com.mathworks.instutil.DisplayPropertiesImpl.(DisplayPropertiesImpl.java:10) at com.mathworks.wizard.WizardModule.provideDisplayProperties(WizardModule.java:67) ... 59 more Caused by: java.lang.UnsatisfiedLinkError: Can't load library: /tmp/mathworks_7417/bin/glnxa64/libinstutil.so at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1842) at java.lang.Runtime.load0(Runtime.java:795) at java.lang.System.load(System.java:1061) at com.mathworks.instutil.NativeUtility.loadNativeLibrary(NativeUtility.java:37) ... 62 more Finished ` I have tried to 1- re-install java run-time 6 and then 7. 2- pass the java-path to the install with : -javadir 3- use the force to install on 32 bits as : sh install -glnx86 -v -javadir /usr/lib/jvm/java-7-openjdk-i386/jre But it seems none of them have worked so far. any ideas ??

    Read the article

  • CodePlex Daily Summary for Wednesday, October 02, 2013

    CodePlex Daily Summary for Wednesday, October 02, 2013Popular ReleasesEla, functional programming language: Ela, dynamic functional language (PDF, book, 0.6): A book about Ela, dynamic functional language in PDF format.Compact 2013 Tools: Managed Code Version of Apps 1.0: Compact13MinShell Download https://download-codeplex.sec.s-msft.com/Images/v20779/RuntimeBinary.gif Compact13MinShellV3.0.zip The Codeplex Project Downloads Page AboutCompact13Tools.zip: Each app as an OS Content Subproject. Includes CoreCon3 Subproject. Apps.zip: Just the apps in a a zip file AppInstallersx86.zip: The apps as separate x86 installers Compact13MinShell Download: (Separate Codeplex Project) The Minshell that implements the menu that includes these apps via registr...Application Architecture Guidelines: App Architecture Guidelines 3.0.8: This document is an overview of software qualities, principles, patterns, practices, tools and libraries.C# Intellisense for Notepad++: Release v1.0.7.0: - smart indentation - document formatting To avoid the DLLs getting locked by OS use MSI file for the installation.CS-Script for Notepad++: Release v1.0.7.0: - smart indentation - document formatting To avoid the DLLs getting locked by OS use MSI file for the installation.State of Decay Save Manager: Version 1.0.2: Added Start/Stop button for timer to manually enable/disable Quick save routine updated to force it to refresh the folder date Quick save added to backup listing Manual update button Lower level hooking for F5 and F9 buttons workingSharePoint Farm documentation tool: SPDocumentor 0.1: SPDocumentor 0.1 This is a POC version of the tool that will be implemented.DotNetNuke® Form and List: 06.00.06: DotNetNuke Form and List 06.00.06 Changes to 6.0.6•Add in Sql to remove 'text on row' setting for UserDefinedTable to make SQL Azure compatible. •Add new azureCompatible element to manifest. •Added a fix for importing templates. Changes to 6.0.2•Fix: MakeThumbnail was broken if the application pool was configured to .Net 4 •Change: Data is now stored in nvarchar(max) instead of ntext Changes to 6.0.1•Scripts now compatible with SQL Azure. Changes to 6.0.0•Icons are shown in module action b...BlackJumboDog: Ver5.9.6: 2013.09.30 Ver5.9.6 (1)SMTP???????、???????????????? (2)WinAPI??????? (3)Web???????CGI???????????????????????Microsoft Ajax Minifier: Microsoft Ajax Minifier 5.2: Mostly internal code tweaks. added -nosize switch to turn off the size- and gzip-calculations done after minification. removed the comments in the build targets script for the old AjaxMin build task (discussion #458831). Fixed an issue with extended Unicode characters encoded inside a string literal with adjacent \uHHHH\uHHHH sequences. Fixed an IndexOutOfRange exception when encountering a CSS identifier that's a single underscore character (_). In previous builds, the net35 and net20...AJAX Control Toolkit: September 2013 Release: AJAX Control Toolkit Release Notes - September 2013 Release (Updated) Version 7.1001September 2013 release of the AJAX Control Toolkit. AJAX Control Toolkit .NET 4.5 – AJAX Control Toolkit for .NET 4.5 and sample site (Recommended). AJAX Control Toolkit .NET 4 – AJAX Control Toolkit for .NET 4 and sample site (Recommended). AJAX Control Toolkit .NET 3.5 – AJAX Control Toolkit for .NET 3.5 and sample site (Recommended). Important UpdateThis release has been updated to fix two issues: Upda...WDTVHubGen - Adds Metadata, thumbnails and subtitles to WDTV Live Hubs: WDTVHubGen.v2.1.4.apifix-alpha: WDTVHubGen.v2.1.4.apifix-alpha is for testers to figure out if we got the NEW api plugged in ok. thanksVisual Log Parser: VisualLogParser: Portable Visual Log Parser for Dotnet 4.0Trace Reader for Microsoft Dynamics CRM: Trace Reader (1.2013.9.29): Initial releaseAudioWordsDownloader: AudioWordsDownloader 1.1 build 88: New features list of words (mp3 files) is available upon typing when a download path is defined list of download paths is added paths history settings added Bug fixed case mismatch in word search field fixed path not exist bug fixed when history has been used path, when filled from dialog, not stored refresh autocomplete list after path change word sought is deleted when path is changed at the end sought word list is deleted word list not refreshed download ends. word lis...Wsus Package Publisher: Release v1.3.1309.28: Fix a bug, where WPP crash when running on a computer where Windows was installed in another language than Fr, En or De, and launching the Update Creation Wizard. Fix a bug, where WPP crash if some Multi-Thread job are launch with more than 64 items. Add a button to abort "Install This Update" wizard. Allow WPP to remember which columns are shown last time. Make URL clickable on the Update Information Tab. Add a new feature, when Double-Clicking on an update, the default action exec...Tweetinvi a friendly Twitter C# API: Alpha 0.8.3.0: Version 0.8.3.0 emphasis on the FIlteredStream and ease how to manage Exceptions that can occur due to the network or any other issue you might encounter. Will be available through nuget the 29/09/2013. FilteredStream Features provided by the Twitter Stream API - Ability to track specific keywords - Ability to track specific users - Ability to track specific locations Additional features - Detect the reasons the tweet has been retrieved from the Filtered API. You have access to both the ma...AcDown?????: AcDown????? v4.5: ??●AcDown??????????、??、??、???????。????,????,?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????,??????、????????????????。 ● AcDown???????C#??,????.NET Framework 2.0??。?????"Acfun?????"。 ??v4.5 ???? AcPlay????????v3.5 ????????,???????????30% ?? ???????GoodManga.net???? ?? ?????????? ?? ??Acfun?????????? ??Bilibili??????????? ?????????flvcd???????? ??SfAcg????????????? ???????????? ???????????????? ????32...Magick.NET: Magick.NET 6.8.7.001: Magick.NET linked with ImageMagick 6.8.7.0. Breaking changes: - ToBitmap method of MagickImage returns a png instead of a bmp. - Changed the value for full transparency from 255(Q8)/65535(Q16) to 0. - MagickColor now uses floats instead of Byte/UInt16.Media Companion: Media Companion MC3.578b: With the feedback received over the renaming of Movie Folders, and files, there has been some refinement done. As well as I would like to introduce Blu-Ray movie folder support, for Pre-Frodo and Frodo onwards versions of XBMC. To start with, Context menu option for renaming movies, now has three sub options: Movie & Folder, Movie only & Folder only. The option Manual Movie Rename needs to be selected from Movie Preferences, but the autoscrape boxes do not need to be selected. Blu Ray Fo...New ProjectsAll CRM Resources for Microsoft Dynamics CRM: Microsoft Dynamics CRM Resources Windows 8 App with News, Feeds, Forums, Blogs, Videos & Twitter updates, information, guides & resources #MSDynCRM community.BasiliskBugTracker: A sample teamwork project for the Telerik Academy's ASP.NET Course 2013.CagerAutoPilot: Programmatically control a toy helicopter with kinectClass Libraries & Database Management: ClassDBManager permette la sincronizzazione delle classi (creazione/modifica/cancellazione) in base alle tabelle contenute nel databaseCommand Line Utility: Enables fast, easy creation of object-oriented settings classes in C# that interface directly with command line input. Minimize code and increase robustness.Controles | Versa: Login Pagina Principal Cadastro UsuáriosDispage: DisPage is a system to hide a website under a different browser title (For example "Vimeo" could look like "Google" (I am working on a way of changing this)ExpressiveDataGenerators: Expressive and powerfull test data generators.Fabrikam Fiber: This project provides download and support to anyone (i.e. trainers) who want to access the Fabrikam Fiber sample application, setup scripts, notes, etc.Get all numbers in between a pair of numbers: Get all integers between two numbers. C#, VB.NETHungryCrowd food lovers market: food lovers market, food, marketsInvalid User Details for SharePoint 2007 and 2010 Sites: Client Based Utility to export invalid users from a SharePoint site (2007 and 2010), as a CSV file using native SP Web Services (UserGroup.asmx and People.asmx)Kh?o Sát Công Ngh?: 1. Tên d? tài: Th?c tr?ng và gi?i pháp h? tr? nâng cao nang l?c c?nh tranh c?a các doanh nghi?p nh? và v?a t?nh Thanh Hóa Lightning: Micro toolkit to make it easy to get content on your site, and serve it fast.LovelyCMS: LovelyCMS ist ein sehr einfaches Content Management System auf der Basis von ASP.NET MVC4.MVC Error Handler: Simple library that allows you to easily create error pages for common HTTP error and application exceptions.MVC Table Styling selection to CSS and demo table: Enter table styling by selection from drop-down list and both generated CSS and see effect of the CSS on a demo table.MvcWebApiFramework: main frameworkNoDemo: It is not only a demo.NumbersInWordsRU: ?????? ??? ??????????? ????? ??????? ? ????? ????????Omnifactotum: Omnifactotum is the .NET library intended to help .NET developers avoid writing the same helper types, methods and extension methods for different projects.Outlook Rules Offline Processor: A utility for organizing Microsoft Outlook rules. The utility uses the rules export file, *.RWZ, to make changes.SharePoint Farm documentation tool: The SPDocumentor (SharePoint Farm documentation tool) allows you to generate a word document that includes most of your farm settings. Startup Shutdown Mailer: This tool is a simple Windows Service which sends an e-mail to a specified account whenever your PC was started up or shut down.YüzKitabi: Daha güvenli ve etkilesimli YüzKitabi Uygulamasi

    Read the article

  • Create and Consume WCF service using Visual Studio 2010

    - by sreejukg
    In this article I am going to demonstrate how to create a WCF service, that can be hosted inside IIS and a windows application that consume the WCF service. To support service oriented architecture, Microsoft developed the programming model named Windows Communication Foundation (WCF). ASMX was the prior version from Microsoft, was completely based on XML and .Net framework continues to support ASMX web services in future versions also. While ASMX web services was the first step towards the service oriented architecture, Microsoft has made a big step forward by introducing WCF. An overview of planning for WCF can be found from this link http://msdn.microsoft.com/en-us/library/ff649584.aspx . The following are the important differences between WCF and ASMX from an asp.net developer point of view. 1. ASMX web services are easy to write, configure and consume 2. ASMX web services are only hosted in IIS 3. ASMX web services can only use http 4. WCF, can be hosted inside IIS, windows service, console application, WAS(Windows Process Activation Service) etc 5. WCF can be used with HTTP, TCP/IP, MSMQ and other protocols. The detailed difference between ASMX web service and WCF can be found here. http://msdn.microsoft.com/en-us/library/cc304771.aspx Though WCF is a bigger step for future, Visual Studio makes it simpler to create, publish and consume the WCF service. In this demonstration, I am going to create a service named SayHello that accepts 2 parameters such as name and language code. The service will return a hello to user name that corresponds to the language. So the proposed service usage is as follows. Caller: SayHello(“Sreeju”, “en”) -> return value -> Hello Sreeju Caller: SayHello(“???”, “ar”) -> return value -> ????? ??? Caller: SayHello(“Sreeju”, “es”) - > return value -> Hola Sreeju Note: calling an automated translation service is not the intention of this article. If you are interested, you can find bing translator API and can use in your application. http://www.microsofttranslator.com/dev/ So Let us start First I am going to create a Service Application that offer the SayHello Service. Open Visual Studio 2010, Go to File -> New Project, from your preferred language from the templates section select WCF, select WCF service application as the project type, give the project a name(I named it as HelloService), click ok so that visual studio will create the project for you. In this demonstration, I have used C# as the programming language. Visual studio will create the necessary files for you to start with. By default it will create a service with name Service1.svc and there will be an interface named IService.cs. The screenshot for the project in solution explorer is as follows Since I want to demonstrate how to create new service, I deleted Service1.Svc and IService1.cs files from the project by right click the file and select delete. Now in the project there is no service available, I am going to create one. From the solution explorer, right click the project, select Add -> New Item Add new item dialog will appear to you. Select WCF service from the list, give the name as HelloService.svc, and click on the Add button. Now Visual studio will create 2 files with name IHelloService.cs and HelloService.svc. These files are basically the service definition (IHelloService.cs) and the service implementation (HelloService.svc). Let us examine the IHelloService interface. The code state that IHelloService is the service definition and it provides an operation/method (similar to web method in ASMX web services) named DoWork(). Any WCF service will have a definition file as an Interface that defines the service. Let us see what is inside HelloService.svc The code illustrated is implementing the interface IHelloService. The code is self-explanatory; the HelloService class needs to implement all the methods defined in the Service Definition. Let me do the service as I require. Open IHelloService.cs in visual studio, and delete the DoWork() method and add a definition for SayHello(), do not forget to add OperationContract attribute to the method. The modified IHelloService.cs will look as follows Now implement the SayHello method in the HelloService.svc.cs file. Here I wrote the code for SayHello method as follows. I am done with the service. Now you can build and run the service by clicking f5 (or selecting start debugging from the debug menu). Visual studio will host the service in give you a client to test it. The screenshot is as follows. In the left pane, it shows the services available in the server and in right side you can invoke the service. To test the service sayHello, double click on it from the above window. It will ask you to enter the parameters and click on the invoke button. See a sample output below. Now I have done with the service. The next step is to write a service client. Creating a consumer application involves 2 steps. One generating the class and configuration file corresponds to the service. Create a project that utilizes the generated class and configuration file. First I am going to generate the class and configuration file. There is a great tool available with Visual Studio named svcutil.exe, this tool will create the necessary class and configuration files for you. Read the documentation for the svcutil.exe here http://msdn.microsoft.com/en-us/library/aa347733.aspx . Open Visual studio command prompt, you can find it under Start Menu -> All Programs -> Visual Studio 2010 -> Visual Studio Tools -> Visual Studio command prompt Make sure the service is in running state in visual studio. Note the url for the service(from the running window, you can right click and choose copy address). Now from the command prompt, enter the svcutil.exe command as follows. I have mentioned the url and the /d switch – for the directory to store the output files(In this case d:\temp). If you are using windows drive(in my case it is c: ) , make sure you open the command prompt with run as administrator option, otherwise you will get permission error(Only in windows 7 or windows vista). The tool has created 2 files, HelloService.cs and output.config. Now the next step is to create a new project and use the created files and consume the service. Let us do that now. I am going to add a console application to the current solution. Right click solution name in the solution explorer, right click, Add-> New Project Under Visual C#, select console application, give the project a name, I named it TestService Now navigate to d:\temp where I generated the files with the svcutil.exe. Rename output.config to app.config. Next step is to add both files (d:\temp\helloservice.cs and app.config) to the files. In the solution explorer, right click the project, Add -> Add existing item, browse to the d:\temp folder, select the 2 files as mentioned before, click on the add button. Now you need to add a reference to the System.ServiceModel to the project. From solution explorer, right click the references under testservice project, select Add reference. In the Add reference dialog, select the .Net tab, select System.ServiceModel, and click ok Now open program.cs by double clicking on it and add the code to consume the web service to the main method. The modified file looks as follows Right click the testservice project and set as startup project. Click f5 to run the project. See the sample output as follows Publishing WCF service under IIS is similar to publishing ASP.Net application. Publish the application to a folder using Visual studio publishing feature, create a virtual directory and create it as an application. Don’t forget to set the application pool to use ASP.Net version 4. One last thing you need to check is the app.config file you have added to the solution. See the element client under ServiceModel element. There is an endpoint element with address attribute that points to the published service URL. If you permanently host the service under IIS, you can simply change the address parameter to the corresponding one and your application will consume the service. You have seen how easily you can build/consume WCF service. If you need the solution in zipped format, please post your email below.

    Read the article

  • Silverlight 5 Hosting :: Features in Silverlight 5 and Release Date

    - by mbridge
    Silverlight 5 is finally announced in the Silverlight FireStarter Event on the 2nd December, 2010. This new version of Silverlight which was earlier labeled as 'Future of Microsoft Silverlight' has now come much closer to go live as the first Silverlight 5 Beta version is expected to be shipped during the early months of 2011. However for the full fledged and the final release of Silverlight 5, we have to wait many more months as the same is likely to be made available within the Q3 2011. As would have been usually expected, this latest edition would feature many new capabilities thereby extending the developer productivity to a whole new dimension of premium media experience and feature-rich business applications. It comes along with many new feature updates as well as the inclusion of new technologies to improve the standard of the Silverlight applications which are now fine-tuned to produce next generation business and media solutions that is capable to meet the requirements of the advanced web-based app development. The Silverlight 5 is all set to replace the previous fourth version which now includes more than forty new features while also dropping various deprecated elements that was prevalent earlier. It has brought around some major performance enhancements and also included better support for various other tools and technologies. Following are some of the changes that are registered to be available under the Silverlight 5 Beta edition which is scheduled to be launched during the Q1 2011. Silverlight 5 : Premium Media Experiences The media features of Silverlight 5 has seen some major enhancements with a lot of optimizations being made to deliver richer solutions. It's capability has now been extended to make things easier, faster and capable of performing the desired tasks in the most efficient manner. The Silverlight media solutions has already been a part of many companies in the recent days where various on-demand Silverlight services were featured but with the arrival of the next generation premium media solution of Silverlight 5, it is expected to register new heights of success and global user acclamation for using it with many esteemed web-based projects and media solutions. - The most happening element in the new Silverlight 5 will be its support for utilizing the GPU based hardware acceleration which is intended to lower down the CPU load to a significant extent and thereby allowing faster rendering of media contents without consuming much resources. This feature is believed to be particularly helpful for low configured machines to run full HD media content without any lagging caused due to processor load. It will hence be one great feature to revolutionize the new generation high quality media contents to be available within the web in a more efficient manner with its hardware decoded video playback capabilities. - With the inclusion of hardware video decoding to minimize the processor load, the Silverlight 5 also comes with another optimization enhancement to also reduce the power consumption level by making new methods to deal with the power-saver settings. With this optimization in effect, the computer would be automatically allowed to switch to sleep mode while no video playback is in progress and also to prevent any screensavers to popup and cause annoyances during any video playback. There would also be other power saver options which will be made available to best suit the users requirements and purpose. - The Silverlight trickplay feature is another great way to tweak any silverlight powered media content as is used for many video tutorial sites or for dealing with any sort of presentations. This feature enables the user to modify the playback speed to either slowdown or speedup during the playback durations based on the requirements without compromising on the quality of output. Normally such manipulations always makes the content's audio to go off-pitch, but the same will not be the case with TrickPlay and the audio would seamlessly progress with the video without skipping any of its part. - In addition to all of the above, the new Silverlight 5 will be featuring wireless control of all the media contents by making use of remote controllers. With the use of such remote devices, it will be easier to handle the various media playback controls thereby providing more freedom while experiencing the premium media services. Silverlight 5 : Business Application Development The application development standard has been extended with more possibilities by bringing forth new and useful technologies and also reviving the existing methods to work better than what it was used to. From the UI improvements to advanced technical aspects, the Silverlight 5 scores high on all grounds to produce great next generation business delivered applications by putting in more creativity and resourceful touch to all the apps being produced with it. - The WPF feature of Silverlight is made more effective by introducing new standards of Databinding which is intended to improve the productivity standards of the Silverlight application developer. It brings in a lot of convenience in debugging the databinding components or expressions and hence making things work in a flawless manner. Some additional features related to databinding includes that of Ancestor RelativeSource, Implicit DataTemplates and Model View ViewModel (MVVM) support with DataContextChanged event and many other new features relating it. - It now comes with a refined text and printing service which facilitates better clarity of the text rendering and also many positive changes which are being applied to the layout pattern. New supports has been added to include OpenType font, multi-column text, linked-text containers and character leading support to name a few among the available features.This also includes some important printing aspects like that of Postscript Vector Printing API which allows to program our printing tasks in a user defined way and Pivot functionality for visualization concerns of informations. - The Graphics support is the key improvements being incorporated which now enables to utilize three dimensional graphics pattern using GPU acceleration. It can manage to provide some really cool visualizations being curved to provide media contents within the business apps with also the support for full HD contents at 1080p quality. - Silverlight 5 includes the support for 64-bit operating systems and relevant browsers and is also optimized to provide better performance. It can support the background thread for the networking which can reduce the latency of the network to a considerable extent. The Out-of-Browser functionality adds the support for utilizing various libraries and also the Win32 API. It also comes with testing support with VS 2010 which is mostly an automated procedure and has also enabled increased security aspects of all the Silverlight 5 developed applications by using the improved version of group policy support.

    Read the article

  • top tweets WebLogic Partner Community – November 2011

    - by JuergenKress
    Send us your tweets @wlscommunity #WebLogicCommunity and follow us on twitter http://twitter.com/wlscommunity glassfish GlassFish Marek’s JAX-RS 2.0 content from Devoxx 2011 – bit.ly/sp2NJO chriscmuir chriscmuir New blog post: ADF bug: missing af:column borders in af:table for IE7 – t.co/81np2jug chriscmuir chriscmuir Reading: Oracle’s ADF Rich Client User Interface (RCUI) Guidelines – oracle.com/webfolder/ux/m… netbeans NetBeans Team Bottlenecks be gone! #Java Performance Tuning workshop in Munich w Kirk Pepperdine, Nov 29-Dec 2: ow.ly/7Akh5 OracleBlogs OracleBlogs Creating ADF Faces Comamnd Button at Runtime ow.ly/1fM9dE alexismp Alexis MP blogged "GlassFish Back from Devoxx 2011, Mature Java EE 6 and EE 7 well on its way" – bit.ly/rP8LV0 JDeveloper JDeveloper & ADF Usage of jQuery in ADF dlvr.it/x3t84 20 hours ago Favorite Retweet Reply OTNArchBeat OTNArchBeat Webcast: Introducing Oracle WebLogic Server 12c: Developer Deep Dive – Dec 1 – 11am PT / 2pm ET bit.ly/t61W4G oraclepartners ORCL PartnerNetwork Brand new Oracle WebLogic 12c will launch on December 1, 10AM PT with a global Webcast highlighting salient… t.co/aflQQ3IX OracleBlogs OracleBlogs JDeveloper and ADF at UKOUG t.co/2CQTiB9n fnimphiu Frank Nimphius Attending UKOUG? All ADF sessions at a glance: t.co/TcMNTMXp 21 Nov Favorite Retweet Reply JDeveloper JDeveloper & ADF Free Webinar ‘ADF Task Flows for Beginners’, information and registration t.co/66jXnGgo via javafx4you javafx4you Java Developer Workshop #2 – Dec 1, 2011 @ Oracle Aoyama center in Tokyo t.co/8p9q3W2B AMIS_Services AMIS Services #vacature #Oracle #ADF ontwikkelaars. bit.ly/AMISADF Gun jezelf een nieuwe uitdaging? Meer op: dld.bz/azZ5N OracleBlogs OracleBlogs Launch Invitation: Introducing Oracle WebLogic Server 12c t.co/bRxCKwAk fnimphiu Frank Nimphius The brand new WebLogic 12c will be released on December 1st 2011 !!! Register for online launch event t.co/pPScg4Xh glassfish GlassFish Announcing Oracle WebLogic 12c – t.co/qh8TdFEl AdamBien Adam Bien Sun Coding Conventions–The Only Standard (Stop Inventing): Code written according to the Sun Coding Conventions… t.co/qaUWp5Mz wlscommunity WebLogic Community Launch Invitation: Introducing Oracle WebLogic Server 12c wp.me/p1LMIb-4y andrejusb Andrejus Baranovskis Andrejus Baranovskis’s Blog: Custom Exception Registration for ADF BC EO Attribute fb.me/1m6nXQD52 MNEMONIC01 Michel Schildmeijer Blog by Michel Schildmeijer: "Oracle WebLogic 12c has been announced" bit.ly/vk6WQL glassfish GlassFish Tab Sweep – Coherence, SBT for GlassFish, OSGi in question, Java EE plugins, … t.co/tVIL95lj OracleBlogs OracleBlogs JavaFX 2.0 at Devoxx 2011 ow.ly/1fJ5iT JDeveloper JDeveloper & ADF Experimenting with ADF BC Application Module Pool Tuning dlvr.it/wjLC1 OracleWebLogic Oracle WebLogic Brand New #WebLogic 12c Launch Event, Dec 1 10am PT. Hasan Rizvi, SVP Fusion Middleware. Developer session. bit.ly/weblogic12clau… JDeveloper JDeveloper & ADF PopUp and Esc/Cancel operations. ADF 11g dlvr.it/whrmC JDeveloper JDeveloper & ADF BPM Workspace: issue loading ADF task flows t.co/vk1gKPx5 OpenJDK OpenJDK Kelly O’Hair — OpenJDK B24 Available : t.co/1bFws6Nw JDeveloper JDeveloper & ADF Oracle ADF setting Task flow to use same page definition file of caller page t.co/9k6UIoYZ JDeveloper JDeveloper & ADF Master Detail Data presentation and CRUD Operations. Detail records in an Editable Popup. ADF 11g t.co/H8uudR0Y JDeveloper JDeveloper & ADF Entity Attribute Validation Rule (Business Rule) based on Master View Object Attribute Example ADF 11g t.co/1agxEQcZ oracletechnet Justin Kestelyn Webcast: Oracle WebLogic Server 12c Launch/Developer Deep-Dive (Dec. 1) t.co/OVBdGKzC JDeveloper JDeveloper & ADF How to render different node icons for different tree levels dlvr.it/wY2jL JDeveloper JDeveloper & ADF Query Component with ‘dynamic’ view criteria dlvr.it/wXlF1 JDeveloper JDeveloper & ADF How to play Flash .swf file in Oracle ADF application t.co/zaSONWAH Devoxx Devoxx Duke at the #Devoxx 2011 Noxx Party! pic.twitter.com/bVJWyu1Z brhubart Bob Rhubart Adam Leftik: JavaEE adoption continues to increase, reaching 40+ million downloads this year. #qconsf11 JDeveloper JDeveloper & ADF Free #ODTUG Seminar – #ADF Task Flows for Beginners – sign up today. www3.gotomeeting.com/register/13372… java Java New Project: OpenJFX j.mp/tI4k3s #javafx #openjdk #devoxx << JavaFX is open source! /via frankmunz Frank Munz WebLogic 12c launch event Dec 1st. t.co/jQKinBqN brhubart Bob Rhubart Spring to Java EE Migration | David Heffelfinger feedly.com/k/td8ccG odtug ODTUG Mark your calendars and register for our upcoming webinars: bit.ly/dWKG1C ADF Task Flows & Measuring Scalability & Performance w/TCP myfear Markus Eisele Anybody willing to take this question? Using #JavaMail with #Weblogic Server bit.ly/stJOET AMIS_Services AMIS Services 20-22 december #training #Oracle JHeadstart #11g, productief ontwikkelen met ADF. Schrijf je in op: amis.nl/trainingen/ora… AdamBien Adam Bien Stress Testing Java EE 6 Applications – Free Article In Free Java Magazine: In the November / December 2011 issu… bit.ly/vmzKkc java Java New Tech Article: Spring to #JavaEE Migration t.co/0EvdHNxb OracleBlogs OracleBlogs WebLogic Java record SPARC T4-4 Servers Set World Record on SPECjEnterprise2010 t.co/Eu1b6ZE0 OracleBlogs OracleBlogs What Is JavaFX? ow.ly/1frb6I OTNArchBeat OTNArchBeat The openJDK Windows Binary Download | Adam Bien ow.ly/7fRiG wlscommunity WebLogic Community WebLogic – Java record – SPARC T4-4 Servers Set World Record on SPECjEnterprise2010 glassfish GlassFish "youtube.com/java" blogs.oracle.com/theaquarium/en… OTNArchBeat OTNArchBeat Beta Testing Concludes: 1Z1-102 – "Oracle WebLogic Server 11g: System Administration I" (Oracle Certification) ow.ly/7fJCl wlscommunity WebLogic Community A deep dive in Oracle WebLogic! @ Contribute – November 29th, 2011 Kontich Belgium wp.me/p1LMIb-4u glassfish GlassFish Gartner’s Latest Enterprise Application Server Magic Quadrant – Oracle’s leadership t.co/aYDqipD8 OpenJDK OpenJDK Terrence Barr – Open sourcing of JavaFX: OpenJFX Project proposed – bit.ly/uKVnEl OpenJDK OpenJDK Maurizio Cimadamore – Testing overload resolution: bit.ly/vgXAbQ java Java Java User Groups Roundup, November 2011 : t.co/hea6vVnk /via @robilad << in German JavaSpotlight The Java Spotlight Java Spotlight Episode 54: Stuart Marks on the Coinification of JDK7 goo.gl/fb/3UXoM OTNArchBeat OTNArchBeat Article Series: Migrating Spring to Java EE 6 | Arun Gupta bit.ly/twUJtz glassfish GlassFish New Java EE 6 Hands-On lab, Devoxx-approved! bit.ly/vup5uE java Java Brian Goetz’s enthusiasm for Java is palpable! #devoxx interview adf_emg ADF EMG "ADF testing with a mock framework" – what is a mock framework? Visit the forum and see: groups.google.com/forum/#!topic/… java Java Taping a bunch of interviews today with Java experts at #devoxx. View on Parleys.com tomorrow. glassfish GlassFish New screencast to configure and run a cross-machine cluster using GlassFish 3.1.1 in < 7 mins faissalb.blogspot.com/2011/11/glassf… (via @bfaissal) glassfish GlassFish Oracle Contributor Agreements – New Home! bit.ly/tD2eLo OTNArchBeat OTNArchBeat Java Magazine – by and for the Java Community- inaugural issue bit.ly/tTv8UD OTNArchBeat OTNArchBeat The Heroes of Java: Michael Hüttermann | @MyFear bit.ly/rYYOFe javafx4you javafx4you Development with #JavaFX on #Linux j.mp/uOpe69 #not_for_the_faint_of_heart java Java Contribute Technical Questions for Java Experts at #devoxx bit.ly/up2cN0 netbeans NetBeans Team A simple REST service using #NetBeans 7, #Java Servlet, and #JAXB: t.co/pKkufsD8 AdamBien Adam Bien The most beautiful, and portable slide of the whole #jaxcon for "Die Hard Java EE 6"session checked-in: kenai.com/projects/javae… jaxlondon JAX London Mark Little’s (@nmcl) excellent keynote from #jaxlondon ‘Middleware Everywhere…’ is available in full – t.co/8vBmtDJ1 AdamBien Adam Bien Calculator sample from "Die Hard Java EE 6" #jaxcon session checked-in: t.co/0UqaULfg OTNArchBeat OTNArchBeat ADF Faces – a logic bomb in the order of bean instantiations | @ChrisCMuir bit.ly/vjqRaZ OracleBlogs OracleBlogs ODI 11g y JMS Queue de Weblogic ow.ly/1fzfQJ frankmunz Frank Munz Which WebLogic book do you recommend? Review of S. Alapati’s WebLogic 11g Administration Handbook. bit.ly/rP0RtW JDeveloper JDeveloper & ADF PageFlowScope with Unbounded Task Flows: the magic sauce for multi-browser-tab support in JDeveloper ADF applications dlvr.it/vNFgn OracleBlogs OracleBlogs 3 New ADF Insider Essential training videos published. ow.ly/1fz94q OracleBlogs OracleBlogs Weblogic Server 11gR1 PS2: Administration Essentials book and eBook t.co/ykzwIaqs OracleBlogs OracleBlogs Specialized Partners Only! New Service to Promote Your Events t.co/qTgyEpY4 wlscommunity WebLogic Community Oracle Weblogic Server 11gR1 PS2: Administration Essentials book and eBook andrejusb Andrejus Baranovskis Andrejus Baranovskis’s Blog: Stress Testing Oracle ADF BC Applications – Intern… andrejusb.blogspot.com/2011/11/stress… OracleBlogs OracleBlogs Frank Nimphius presenting a full day of Oracle ADF in Switzerland ow.ly/1fxU78 java Java #JavaEE and #GlassFish: #JavaOne11 Slides, Demos, Replays, Hands-on Labs t.co/tLM0ehrD OracleBlogs OracleBlogs weblogic.security.SecurityInitializationException: Authentication for user weblogic denied ow.ly/1fxmiu glassfish GlassFish The Last Migration – GlassFish Wiki : t.co/Dc5FT1SJ OTNArchBeat OTNArchBeat A Successful Year of @MiddlewareMagic t.co/amcGGTTk OracleWebLogic Oracle WebLogic Unbeatable Performance for your Cloud Applications with Exalogic, #OracleCoherence and #WebLogic. ow.ly/7lYKm OTNArchBeat OTNArchBeat Stress Testing Oracle ADF BC Applications – Passivation and Activation | @AndrejusB bit.ly/sASssL OTNArchBeat OTNArchBeat Review: "Oracle Weblogic Server 11gR1 PS2: Administration Essentials" by Michel Schildmeijer | @MyFear t.co/ll6ra0J9 OTNArchBeat OTNArchBeat GlassFish 3.1.2 themes and features | The Aquarium bit.ly/vVqr9r Andre_van_Dalen Andre van Dalen Masterclass: Advanced Oracle ADF 11g lnkd.in/M_45Pi AdamBien Adam Bien The "lunch" edition of RentACar is pushed into: kenai.com/projects/javae… #wjax AdamBien Adam Bien In munich, room munich at #wjax. Welcome to #javaee workshop. Gather your questions. 15 minutes to go lucasjellema Lucas Jellema Review by Markus of Michel’s book: t.co/41U9wvOb In short: valuable for novice WLS users, maybe not so much for die-hard WLS admin. biemond Edwin Biemond “@myfear: [blog] #Review: "#Weblogic Server 11gR1 PS2: Administration Essentials" t.co/LsODcb3e” got the same conclusion on amazon glassfish GlassFish Practical advice for deploying Lift apps to GlassFish: bit.ly/t3KUml glassfish GlassFish The unbearable lightness of GlassFish t.co/v9307SEJ javafx4you javafx4you Building Java EE applications in JavaFX: JavaFX 2.0, FXML and Spring j.mp/tiMDUh andrejusb Andrejus Baranovskis Andrejus Baranovskis’s Blog: Stress Testing Oracle ADF BC Applications – Passiv… andrejusb.blogspot.com/2011/11/stress… wlscommunity WebLogic Community “@AMIS_Services: Follow @amis_services To Win a copy of SOA Suite 11g Handbook by @lucasjellema dld.bz/axD22 pls RT” excellent book! glassfish GlassFish GlassFish 3.1.2 themes and features bit.ly/uEc6uZ biemond Edwin Biemond Weblogic pre-sales exam was hard, you really need to know the versions , upgrade path and have a score above 80% monkchips James Governor The Rise and Fall and Rise of Java. JAX 2011 london keynote. how big data and the web are floating the boat. slidesha.re/u3Kzlo glassfish GlassFish Tab Sweep – Jersey, Hudson, GlassFish Hosting, GC’s compared, Spring to JavaEE, Modularity, … bit.ly/u9Cc30 oracletechnet Justin Kestelyn Oracle Tuxedo: A renewed acquaintance t.co/gp0mmf20 OTNArchBeat OTNArchBeat Oracle Enterprise Pack for Eclipse, OEPE 11.1.1.8 bit.ly/tC3eKp OracleBlogs OracleBlogs NetBeans HTML Editor and Groovy Editor in a Multiview Component (Part 2) ow.ly/1ftCeI myfear Markus Eisele [blog] #Oracle 2008 – 2011 in Gartners Magic Quadrant for Enterprise Application Servers t.co/2Bs1vgMZ myfear Markus Eisele [blog] #EclipseCon Europe – Java 7 in the Enterprise goo.gl/fb/r80df #ece2011 #java7 javafx4you javafx4you JavaFX 2.0 for Mac build b07 (developer preview) is available for download j.mp/vSwmBP Enjoy! #JavaFX #Mac OracleBlogs OracleBlogs A deep dive in Oracle WebLogic! @ Contribute November 29th, 2011 Kontich Belgium ow.ly/1fsEZs arungupta Arun Gupta #JavaEE7 slides from #jaxlondon and #jfall11 now available: slidesha.re/sh4iFq AdamBien Adam Bien Just checked-in the results of the #jaxlondon community night (somehow beer related): kenai.com/projects/javae… glassfish GlassFish GlassFish Podcast Episode #080 – User Stories, Part 3: Adam Bien and Sean Comerford (ESPN) blogs.oracle.com/glassfishpodca… glassfish GlassFish Story: t.co/jQPqihJb using GlassFish blogs.oracle.com/stories/entry/… "3000+ requests/sec" and more enterprisejava Java EE Mentions New blog post WebLogic deployment status checks for CI wp.me/pOOSs-F #weblogic #continuousintegration /vi… bit.ly/uZz0fk The become a member in the WebLogic Partner Community please first login at http://partner.oracle.com and then visit: http://www.oracle.com/partners/goto/wls-emea Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: twitter,WebLogic,WebLogic Community,OPN,Oracle,Jürgen Kress

    Read the article

  • How to Collect Debug Info for Oracle SQL Developer

    - by thatjeffsmith
    In a perfect world, there would be no software bugs. Developers would always test their code. QA would find any scenarios and bugs the developers hadn’t already thought of. Regression tests would be complete and flawless. But alas, we can only afford to pay mere humans here, so we will have bugs from time to time. Or sometimes you are trying to do something the software wasn’t designed for, or perhaps your machine has exhausted it’s resources trying to build the un-buildable. When you run into problems, you will need help. Developers need your help so they can help you. Surprisingly enough, feedback like this isn’t very helpful: Your program isn’t working. How can I make it work? When you are ready to work with us on the SQL Developer OTN forum, you will most likely be asked to run SQL Developer and capture the output from the command console. In case you need help with this, ere’s a step-by-step process you can follow in Windows 7 (should work in XP too.) Open a windows command window Start – Run – CMD Once it’s open, click on the window icon and select ‘Defaults.’ Change the default buffer size to be something bigger, much bigger. Set the CMD window default buffer size HIGHER Note: you only need to do this once. Navigate to your SQL Developer Installation Folder Instead of running the ‘sqldeveloper.exe’ file in the root directory, we are going to go several sub-directories down. Find the ‘bin’ sub-directory and run the ‘sqldeveloper.exe’ there. When you do this, a CMD window will open, and then you’ll see the SQL Developer application load. The SQL Developer bin directory - run the tool from here and get a logging window Use SQL Developer as normal, until it ‘breaks’ or ‘hangs’ Now, you are ready to grab the nitty-gritty information that MIGHT tell the developer what is going wrong or happening in your scenario. Click back into the CMD window Send a Ctrl+Break or a Ctrl+Pause. If you on a newer laptop that doesn’t have this key, be sure to check the ‘Fn’ subset of keys. If you need to map the BREAK or PAUSE buttons, this article might help. You can also try the on-screen keyboard in windows – just type ‘OSK’ in your START – RUN prompt. Copy the logging information from the command window – all of it We need this information, help us get it! Open a case with Oracle Support or Start a Thread on the Forums Or email me. If you’re on my blog reading this, it’s the least I can do to help Now, before you hit ‘Send’ or ‘Post’ or ‘Submit’ – be sure to add a brief description of what you were doing in the application when you ran into the problem. Even if you were doing ‘nothing,’ let us know how many connections you had open, what windows were active, etc. The more you can tell us, the higher your odds go up to getting a quick fix or at least an answer as to what is happening. Also include the following information: The version of SQL Developer you are running The version of the JDK you are using The OS you are using The version of Oracle you are connected to Now, don’t be surprised if you get asked to upgrade to a supported configuration, say ‘version 3.1 and the 1.6 JDK.’ Supporting older versions of software is fun, and while we enjoy a challenge, it may be easier for you to upgrade your way out of the problem at hand.

    Read the article

  • Day 2 - Game Design Documentation

    - by dapostolov
    So yesterday I didn't cut any code for my game but I was able to do a tiny bit of research on the XNA Game Development Technology and the communities out there and do you know what? I feel I'm a bit closer to my goal. The bad news is today I didn't cut code either. However, not all is lost because I wanted to get my ideas on paper and today I just did that.  Today, I began to jot down notes about the game and how I felt the visual elements would interact with each other. Unlike my workplace, my personal level of documentation is nothing more than a task list or a mind map of my ideas; it helps me streamline my solutions quiet effectively and circumvent the long process of articulating each thought to the n-th degree. I truly dislike documentation (because I have an extremely hard time articulating my thought and solutions); however, because I tend to do a really good job with documentation I tend to get stuck writing the buggers. But as a generalist remark: 'No Developer likes documentation.' For now let's stick with my basic notes and call this post a living document. Here are my notes, fresh, from after watching the new first episode of Merlin second season! Actually, a quick recommendation to anyone who is reading this (if anyone is): I truly recommend you envelope yourself in the medium or task you're trying to tackle. Be one with moment and feel it! For instance: Are you writing a fantasy script / game? What would the music of the genre sound like? For me the Conan the Barbarian soundtrack by Basil Poledouris is frackin awesome. There are many other good CD's out there, which I listen to (some who even use medival instruments, but Conan I keep returning to. It's a creative trigger for me. Ask yourself what would the imagery look like? Time to surf google for artist renditions of fantasy! What would the game feel like? Start playing some of your favorite games that inspire you, be wary though, have some self control and don't let it absorb your time. Anyhow, onto the documentation... Screens, Scenes, and Sprites. Oh My! (groan...) The first thing that came to mind were the screens, I thought the following would suffice: Menu Screen Character Customisation Screen Loading Screen? Battle Ground The Menu Screen Ok. So, the thought here is when the game loads a huge title is displayed: Wizard Wars. The player is prompted with 3 menu items: 1 Player Game, 2 Player Game, and Exit. Since I'm targetting the PC platform, as a non-networked game to start, I picture myself running my mouse over each menu option and the visual element of the menu item changes, along with a sound to indicate that I am over a curent menu item. And as I move my mouse away, it changes back, and possibly an exit mouse sound. Maybe on the screen somewhere is a brazier alit with a magical tome open right beside it, OR, maybe the tome is the menu! I hear the menu music as mellow, not obtrusive or piercing. On a menu item select, a confirmation sound bellows to indicate the players selection. The Esc key will always return me to the previous screens or desktop. The menu screen must feel...dark, like a really important ritual is about to happen and thus the music should build up. 1 Player Game - > Customize Character(s) 2 Player Game - > Customize Character(s) Exit - > Back to Windows Notes: So the first thing I pick up here are a couple things: First and foremost, my artistic abilities suck crap, so I may have to hire an artist (now that i've said that, lets get techy) graphical objects will be positioned within a scene on each screen / window. Menu items will be represented grapically, possibly animated, and have sound / animation effects triggered by user input or a time line. I have an animated scene involving a brazier or fire on a stick IF I was to move this game to the xbox, I'd have to track which menu item is currently selected (unless I do a mouse pointer type thing.) WindowObject has a scene A Scene has many GameObjects GameObject has a position graphic or animation MenuObject is a GameObject which has a mouse in, mouse out, and click event which either does something graphically (animation), does something with sound, or moves to another screen.  Character Customisation Screen With either the 1 or 2 player option selected, both selections will come to this screen; a wizard requires a name, powers, and vestements of course! Player one will configure his character first and then player two. I considered a split screen for PC but to have two people fighting over a keyboard would probably suck. For XBox, a split screen could work; maybe when I get into the networking portion (phase 2 blog?) of this game I will remove the 2 player option for PC and provide only multiplayer and I will leave 2 player for xbox...hmm... Anyhow...I picture the creation process as follows: Name: (textbox / keyboard entry) - for xbox, this would have to be different. Robe Color: (color box, or something) Stats: Speed, Oomph, and Health. (as sliders) 1 as minimum and 10 as maximum. Ok, Back, and Cancel buttons / options. Each stat has a benefit which are listed below. The idea is the player decides if he wants his wizard to run fast, be a tank and ... hit with a purse.Regardless, the player will have a pool of 12 points to use. Ideally, A balanced wizard will have 5 in each attribute. Spells? The only spell of choice is a ball of fire which comes without question. The music and screen should still feel like a ritual. The Character Speed Basically, how fast your character moves and casts. Oomph (Best Monster Truck Voice): PURE POWAH!!! The damage output of your fireball. Health How much damage you can take. Notes: I realise the game dynamics may sound uninteresting at the moment; but I think after a couple releases, we could have some other grand ideas such as: saved profiles, gold to upgrade arsenal of spells, talents, etc...but for now...a vanilla fireball thrower mage will suffice for this experiment. OK. So... a MenuObject  may need to be loosely coupled to allow future items such as networking? may be a button? a CharacterObject has a name speed oomph health and a funky robe color. cap on the three stats (1-10) an arsenal of 1 spell (possibly could expand this) The Loading Screen As is. The Battleground Screen For now, I'm keeping the screen as max resolution for the PC. The screen isn't going to move or even be a split screen. I'm not aiming high here because I want to see what level of change is involved when new features / concepts are added to game content. I'm interested to find out if we could apply techniques such as MVC or MVVM to this type of development or is it too tightly coupled? This reminds me when when my best friend and I were brainstorming our game idea (this is going back a while...1994, 6?) and he cringed at the thought of bringing business technology into games, especially when I suggested a database to store character information and COM / DCOM as the medium, but it seems I wasn't far off (reflecting); just like his implementation of a xml "config file" for dynamic direct-x menus back before .net in 1999...anyhow...i digress... The Battle One screen, two characters lobing balls of fire at each other...It doesn't get better than that. Every so often a scroll appears...and the fireballs bounce off walls, or the wizard has rapid fire, or even scrolls of healing! The scroll options are endless. Two bars at the top, each the color of the wizard (with their name beside the bar) indicate how much health they have. Possibly the appearance of the scrolls means the battle is taking too long? I'm thinking 1 player controls: up, down, left, right and space to fire the button. Or even possibly, mouse click and shift - mouse button to fire a spell in the direction they are facing. Two player controls: a, s, d, f and space AND arrows (up, down, left, right) and Del key or Crtl. The game ends when a player has 0 health and a dialog box appears asking for a rematch / reconfigure / exit. Health goes down when a fireball (friendly or not), connects with a wizard. When a wizard connects with a scroll, a countdown clock / icon appears near the health bar and the wizard begins to glow. For the most part, a wizard can have only scroll 1 effect on him at a time. Notes: Ok, there's alot to cover here. a CharacterObject is a GameObject it travels at a set velocity it travels in a direction it has sounds (walking, running, casting, impact, dying, laughing, whistling, other?) it has animations (walking, running, casting, impact, dying, laughing, idle, other?) it has a lifespan (determined by health) it is alive or dead it has a position a ScrollObject is a GameObject it carries a transferance of points "damage" (or healing, bad scroll effect?) (determinde by caster) it carries a transferance of "other" it is stationary it has a sound on impact it has a stationary animation it has an impact animation / or transfers an impact animation it has a fade animation? it has a lifespan (determined by game) it is alive or dead it has a position a WallObject is a GameObject it has a sound on fireball impact? it is a still image / stationary it has an impact animation / or transfers an impact animation it is dead it has a position A FireBall is a GameObject it carries a transferance of poinst "damage" (or healing, bad scroll effect?) (determinde by caster) it travels at a set velocity it travels in a direction it has a sound it has a travel animation it has an impact animation / or transfers an impact animation it has a fade animation? it has a lifespan (determined by caster) it is alive or dead it has a position As I look at this, I can see some common attributes in each object that I can carry up to the GameObject. I think I'm going to end the documentation here, it's taken me a bit of time to type this all out, tomorrow. I'll load up my IDE and my paint studio to get some good old fashioned cowboy hacking going!   D.

    Read the article

  • WebLogic Server Performance and Tuning: Part I - Tuning JVM

    - by Gokhan Gungor
    Each WebLogic Server instance runs in its own dedicated Java Virtual Machine (JVM) which is their runtime environment. Every Admin Server in any domain executes within a JVM. The same also applies for Managed Servers. WebLogic Server can be used for a wide variety of applications and services which uses the same runtime environment and resources. Oracle WebLogic ships with 2 different JVM, HotSpot and JRocket but you can choose which JVM you want to use. JVM is designed to optimize itself however it also provides some startup options to make small changes. There are default values for its memory and garbage collection. In real world, you will not want to stick with the default values provided by the JVM rather want to customize these values based on your applications which can produce large gains in performance by making small changes with the JVM parameters. We can tell the garbage collector how to delete garbage and we can also tell JVM how much space to allocate for each generation (of java Objects) or for heap. Remember during the garbage collection no other process is executed within the JVM or runtime, which is called STOP THE WORLD which can affect the overall throughput. Each JVM has its own memory segment called Heap Memory which is the storage for java Objects. These objects can be grouped based on their age like young generation (recently created objects) or old generation (surviving objects that have lived to some extent), etc. A java object is considered garbage when it can no longer be reached from anywhere in the running program. Each generation has its own memory segment within the heap. When this segment gets full, garbage collector deletes all the objects that are marked as garbage to create space. When the old generation space gets full, the JVM performs a major collection to remove the unused objects and reclaim their space. A major garbage collect takes a significant amount of time and can affect system performance. When we create a managed server either on the same machine or on remote machine it gets its initial startup parameters from $DOMAIN_HOME/bin/setDomainEnv.sh/cmd file. By default two parameters are set:     Xms: The initial heapsize     Xmx: The max heapsize Try to set equal initial and max heapsize. The startup time can be a little longer but for long running applications it will provide a better performance. When we set -Xms512m -Xmx1024m, the physical heap size will be 512m. This means that there are pages of memory (in the state of the 512m) that the JVM does not explicitly control. It will be controlled by OS which could be reserve for the other tasks. In this case, it is an advantage if the JVM claims the entire memory at once and try not to spend time to extend when more memory is needed. Also you can use -XX:MaxPermSize (Maximum size of the permanent generation) option for Sun JVM. You should adjust the size accordingly if your application dynamically load and unload a lot of classes in order to optimize the performance. You can set the JVM options/heap size from the following places:     Through the Admin console, in the Server start tab     In the startManagedWeblogic script for the managed servers     $DOMAIN_HOME/bin/startManagedWebLogic.sh/cmd     JAVA_OPTIONS="-Xms1024m -Xmx1024m" ${JAVA_OPTIONS}     In the setDomainEnv script for the managed servers and admin server (domain wide)     USER_MEM_ARGS="-Xms1024m -Xmx1024m" When there is free memory available in the heap but it is too fragmented and not contiguously located to store the object or when there is actually insufficient memory we can get java.lang.OutOfMemoryError. We should create Thread Dump and analyze if that is possible in case of such error. The second option we can use to produce higher throughput is to garbage collection. We can roughly divide GC algorithms into 2 categories: parallel and concurrent. Parallel GC stops the execution of all the application and performs the full GC, this generally provides better throughput but also high latency using all the CPU resources during GC. Concurrent GC on the other hand, produces low latency but also low throughput since it performs GC while application executes. The JRockit JVM provides some useful command-line parameters that to control of its GC scheme like -XgcPrio command-line parameter which takes the following options; XgcPrio:pausetime (To minimize latency, parallel GC) XgcPrio:throughput (To minimize throughput, concurrent GC ) XgcPrio:deterministic (To guarantee maximum pause time, for real time systems) Sun JVM has similar parameters (like  -XX:UseParallelGC or -XX:+UseConcMarkSweepGC) to control its GC scheme. We can add -verbosegc -XX:+PrintGCDetails to monitor indications of a problem with garbage collection. Try configuring JVM’s of all managed servers to execute in -server mode to ensure that it is optimized for a server-side production environment.

    Read the article

  • Does IntelliJ-Idea support Groovy 2.x?

    - by Freewind
    I just tried IntelliJ-Idea 11.x and 12.x (EPA), but when I use Groovy 2.0.1 or 2.0.5, the code can't be run and there are some errors out there. The Groovy plugin of idea has little information about which version of Groovy has been supported. Does idea support Groovy 2.x? I want to try the new @TypeChecked annotation of Groovy 2. UPDATE My groovy code: class X { def hello() { println("hello, groovy") } def static main(String[] args) { new X().hello() } } It uses groovy 2.0.5: And the error thrown: E:\java\jdk1.6.0_29_x64\bin\java -Didea.launcher.port=7532 "-Didea.launcher.bin.path=E:\java\IntelliJ IDEA 11.1.4\bin" -Dfile.encoding=UTF-8 -classpath "E:\java\jdk1.6.0_29_x64\jre\lib\charsets.jar;E:\java\jdk1.6.0_29_x64\jre\lib\deploy.jar;E:\java\jdk1.6.0_29_x64\jre\lib\javaws.jar;E:\java\jdk1.6.0_29_x64\jre\lib\jce.jar;E:\java\jdk1.6.0_29_x64\jre\lib\jsse.jar;E:\java\jdk1.6.0_29_x64\jre\lib\management-agent.jar;E:\java\jdk1.6.0_29_x64\jre\lib\plugin.jar;E:\java\jdk1.6.0_29_x64\jre\lib\resources.jar;E:\java\jdk1.6.0_29_x64\jre\lib\rt.jar;E:\java\jdk1.6.0_29_x64\jre\lib\ext\dcevm.jar;E:\java\jdk1.6.0_29_x64\jre\lib\ext\dnsns.jar;E:\java\jdk1.6.0_29_x64\jre\lib\ext\localedata.jar;E:\java\jdk1.6.0_29_x64\jre\lib\ext\sunjce_provider.jar;E:\WORKSPACE\TestGroovy2\out\production\TestGroovy2;E:\java\groovy-2.0.5\lib\ant-1.8.4.jar;E:\java\groovy-2.0.5\lib\ant-antlr-1.8.4.jar;E:\java\groovy-2.0.5\lib\ant-junit-1.8.4.jar;E:\java\groovy-2.0.5\lib\ant-launcher-1.8.4.jar;E:\java\groovy-2.0.5\lib\antlr-2.7.7.jar;E:\java\groovy-2.0.5\lib\asm-4.0.jar;E:\java\groovy-2.0.5\lib\asm-analysis-4.0.jar;E:\java\groovy-2.0.5\lib\asm-commons-4.0.jar;E:\java\groovy-2.0.5\lib\asm-tree-4.0.jar;E:\java\groovy-2.0.5\lib\asm-util-4.0.jar;E:\java\groovy-2.0.5\lib\bsf-2.4.0.jar;E:\java\groovy-2.0.5\lib\commons-cli-1.2.jar;E:\java\groovy-2.0.5\lib\commons-logging-1.1.1.jar;E:\java\groovy-2.0.5\lib\gpars-1.0-beta-3.jar;E:\java\groovy-2.0.5\lib\groovy-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-ant-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-bsf-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-console-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-docgenerator-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-groovydoc-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-groovysh-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-jmx-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-json-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-jsr223-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-servlet-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-sql-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-swing-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-templates-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-test-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-testng-2.0.5.jar;E:\java\groovy-2.0.5\lib\groovy-xml-2.0.5.jar;E:\java\groovy-2.0.5\lib\hamcrest-core-1.1.jar;E:\java\groovy-2.0.5\lib\ivy-2.2.0.jar;E:\java\groovy-2.0.5\lib\jansi-1.6.jar;E:\java\groovy-2.0.5\lib\jcommander-1.12.jar;E:\java\groovy-2.0.5\lib\jline-1.0.jar;E:\java\groovy-2.0.5\lib\jsp-api-2.0.jar;E:\java\groovy-2.0.5\lib\jsr166y-1.7.0.jar;E:\java\groovy-2.0.5\lib\junit-4.10.jar;E:\java\groovy-2.0.5\lib\qdox-1.12.jar;E:\java\groovy-2.0.5\lib\servlet-api-2.4.jar;E:\java\groovy-2.0.5\lib\testng-6.5.2.jar;E:\java\groovy-2.0.5\lib\xmlpull-1.1.3.1.jar;E:\java\groovy-2.0.5\lib\xstream-1.4.2.jar;E:\java\IntelliJ IDEA 11.1.4\lib\idea_rt.jar" com.intellij.rt.execution.application.AppMain X Exception in thread "main" java.lang.IncompatibleClassChangeError: Found interface org.objectweb.asm.MethodVisitor, but class was expected at org.codehaus.groovy.runtime.callsite.CallSiteGenerator.genConstructor(CallSiteGenerator.java:141) at org.codehaus.groovy.runtime.callsite.CallSiteGenerator.genPogoMetaMethodSite(CallSiteGenerator.java:162) at org.codehaus.groovy.runtime.callsite.CallSiteGenerator.compilePogoMethod(CallSiteGenerator.java:215) at org.codehaus.groovy.reflection.CachedMethod.createPogoMetaMethodSite(CachedMethod.java:228) at org.codehaus.groovy.runtime.callsite.PogoMetaMethodSite.createCachedMethodSite(PogoMetaMethodSite.java:212) at org.codehaus.groovy.runtime.callsite.PogoMetaMethodSite.createPogoMetaMethodSite(PogoMetaMethodSite.java:188) at groovy.lang.MetaClassImpl.createPogoCallSite(MetaClassImpl.java:3035) at org.codehaus.groovy.runtime.callsite.CallSiteArray.createPogoSite(CallSiteArray.java:147) at org.codehaus.groovy.runtime.callsite.CallSiteArray.createCallSite(CallSiteArray.java:161) at org.codehaus.groovy.runtime.callsite.CallSiteArray.defaultCall(CallSiteArray.java:45) at org.codehaus.groovy.runtime.callsite.AbstractCallSite.call(AbstractCallSite.java:108) at org.codehaus.groovy.runtime.callsite.AbstractCallSite.call(AbstractCallSite.java:112) at X.main(sta.groovy:6) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.intellij.rt.execution.application.AppMain.main(AppMain.java:120) Process finished with exit code 1

    Read the article

  • CodePlex Daily Summary for Wednesday, April 21, 2010

    CodePlex Daily Summary for Wednesday, April 21, 2010New ProjectsA WPF ImageButton that uses pixel shader for dynamically change the image status: A WPF ImageButton that uses pixel shader for dynamically change the image status.CCLI SongSelect Library: A managed code library for reading and working with CCLI SongSelect files in C#, VB.NET or any other language that can use DLLs built with Managed ...code paste: A code paste with idea, insight and funny from web. All the paster rights belong the original author.CodeBlock: CodeBlock is CLI implementation which uses LLVM as its native code generator. CodeBlock provides LLVM binding for .NET which is written in C#, a...CSS 360 Planetary Calendar: This is the Planetary Calendar for UW Bothell -- CSS 360DNN 4 Friendly Url Modification: DNN 4.6.2.0 source code modification for Friendly URL support.Event Scavenger: "Event Scavenger" was created out of a need to manage and monitor multiple servers and have a global view of what's happening in the logs of multip...FastBinaryFileSearch: General Purpose Binary Search Implementation Of BoyerMooreHorspool Algorithmgotstudentathelaticprofile: Test project Grate: Grate process photos by color-dispersion-tree It's developed in C#GZK2010: GZK Project is used for sdo.gzk 2010JpAccountingBeta: JpAccountingBetaLog4Net Viewer: Log4Net Viewer is a log4net files parser and exposes them to webservices. You can then watch them on a rich interface. This code is .NET4 with an ...MarkLogic Toolkit for Excel: The MarkLogic Toolkit for Excel allows you to quickly build content applications with MarkLogic Server that extend the functionality of Microsoft E...MarkLogic Toolkit for PowerPoint: The MarkLogic Toolkit for PowerPoint allows you to quickly build content applications with MarkLogic Server that extend the functionality of Micros...MarkLogic Toolkit for Word: The MarkLogic Toolkit for Word allows you to quickly build content applications with MarkLogic Server that extend the functionality of Microsoft Wo...MvcContrib Portable Areas: This project hosts mvccontrib portable areas.OgmoXNA: OgmoXNA is an XNA 3.1 Game Library and set of Content Pipeline Extensions for Matt Thorson's multi-platform Ogmo Editor. Its goal is to provide ne...Pdf ebook seaerch engine and viewer: PDF Search Engine is a book search engine search on sites, forums, message boards for pdf files. You can find and download a tons of e-books but p...ResizeDragBehavior: This C# Silverlight 3 ResizeDragBehavior is a simpel implementation of resizing columns left, right, above or under a workingspace. It allows you ...Roguelike school project: A simple Rogue-like game made in c# for my school project. Uses Windows forms for GUI and ADO.NET + SQL Server CE for persistency.SharePoint Service Account Password Recovery Tool: A utility to recover SharePoint service account and application pool passwords.Smart Include - a powerful & easy way to handle your CSS and Javascript includes: Smart Include provides web developers with a very easy way to have all their css and javascript files compressed and/or minified, placed in a singl...sNPCedit: Perfect World NPC Editorstatusupdates: Generic status updatesTRXtoHTML: This is a command line utility to generate html report files from VSTS 2008 result files (trx). Usage: VSTSTestReport /q <input trx file> <outpu...WawaWuzi: 网页版五子棋,欢迎大家参与哦,呵呵。WPF Alphabet: WPF Alphabet is a application that I created to help my child learn the alphabet. It displays each letter and pronounces it using speech synthesis....WPF AutoCompleteBox for Chinese Spell: CSAutoBox is a type of WPF AutoCompleteBox for Chinese Spell in Input,Like Google,Bing.WpfCollections: WpfCollections help in WPF MVVM scenarios, resolving some of common problems and tasks: - delayed CurrentChange in ListCollectionView, - generate...XML Log Viewer in the Cloud: Silvelright 4 application hosted on Windows Azure. Upload any log file based on xml format. View log, search log, diff log, catalog etc.New ReleasesA Guide to Parallel Programming: Drop 3 - Guide Preface, Chapters 1, 2, 5, and code: This is Drop 3 with Guide Preface, Chapters 1, 2, 5, and References, and the accompanying code samples. This drop requires Visual Studio 2010 Beta ...Artefact Animator: Artefact Animator - Silverlight 4 and WPF .Net 4: Artefact Animator Version 4.0.4.6 Silverlight 4 ArtefactSL.dll for both Debug and Release. WPF 4 Artefact.dll for both Debug and Release.ASP.NET Wiki Control: Release 1.2: Includes SyntaxHighlighter integration. The control will display the functionality if it detects that http://alexgorbatchev.com/wiki/SyntaxHighli...C# to VB.NET VB.NET To C# Code Convertor: CSharp To VB.Net Convertor VS2010 Support: !VS2010 Support Added To The Addon Visual Studio buildin VB.Net To C# , C# To VB.Net Convertor using NRefactor from icsharpcode's SharpDevelop. The...CodeBlock: LLVM - 2010-04-20: These are precompiled LLVM dynamic link libraries. One for AMD64 architecture and one for IA32. To use these DLL's you should copy them to corresp...crudwork library: crudwork 2.2.0.4: What's new: qapp (shorts for Query Analyzer Plus Plus) is a SQL query analyzer previously for SQLite only now works for all databases (SQL, Oracle...DiffPlex - a .NET Diff Generator: DiffPlex 1.1: Change listFixed performance bug caused by logging for debug build Added small performance fix in the core diff algorithm Package the release b...Event Scavenger: First release (version 3.0): This release does not include any installers yet as the system is a bit more complex than a simple MSI installer can handle. Follow the instruction...Extend SmallBasic: Teaching Extensions v.012: added archiving for screen shots (Tortoise.approve) ColorWheel exits if emptyFree Silverlight & WPF Chart Control - Visifire: Charts for Silverlight 4!: Hi, Visifire now works with Silverlight 4. Microsoft released Silverlight 4 last week. Some of the new features include more fluid animations, Web...IST435: Lab 5 - DotNetNuke Module Development: Lab 5 - DotNetNuke Module DevelopmentThis is the instructions for Lab 5 on. This lab must be completed in-class. It is based on your Lab 4.KEMET_API: Kemet API v0.2d: new platform with determiners and ideograms ... please consult the "release_note.txt" for more informations.MDT Scripts, Front Ends, Web Services, and Utilities for use with ConfigMgr/SCCM: PrettyGoodFrontEndClone (v1.0): This is a clone of the great PrettyGoodFrontEnd written by Johan Arwidmark that uses the Deployment Webservice as a backend so you don't need to ho...NMigrations: 1.0.0.3: CHG: upgraded solution/projects to Visual Studio 2010 FIX: removed precision/scale from MONEY data type (issue #8081) FIX: added support for binary...Object/Relational Mapper & Code Generator in Net 2.0 for Relational & XML Schema: 2.6: Minor release.OgmoXNA: OgmoXNA Alpha Binaries: Binaries Release build binaries for the Windows and Xbox 360 platforms. Includes the Content Pipeline Extensions needed to build your projects in ...Ox Game Engine for XNA: Release 70 - Fixes: Update in 2.2.3.2 Removed use of 'reflected' render state. May fix some render errors. Original Hi all! I fixed all of the major known problems...patterns & practices – Enterprise Library: Enterprise Library 5.0 - April 2010: Microsoft Enterprise Library 5.0 official binaries can be downloaded from MSDN. Please be patient as the bits get propagated through the download s...Pdf ebook seaerch engine and viewer: Codes PDf ebook: CodesPlay-kanaler (Windows Media Center Plug-in): Playkanaler 1.0.4: Playkanaler version 1.0.4 Viasatkanalerna kanske fungerar igen, tack vare AleksandarF. Pausa och spola fungerar inte ännu.PokeIn Comet Ajax Library: PokeIn v06 x64: Bug fix release of PokeIn x64 Security Bugs Fixed Encoding Bugs Fixed Performance Improvements Made New Method in BrowserHelper classPokeIn Comet Ajax Library: PokeIn v06 x86: Bug fix release of PokeIn x86 Security Bugs Fixed Encoding Bugs Fixed Performance Improvements Made New Method in BrowserHelper classPowerSlim - Acceptance Testing for Enterprise Applications: PowerSlim 0.2: We’re pleased to announce the PowerSlim 0.2. The main feature of this release is Windows Setup which installs all you need to start doing Acceptan...Rapidshare Episode Downloader: RED v0.8.5: This release fixes some bugs that mainly have to do with Next and Add Show functionality.Rawr: Rawr 2.3.15: - Improvements to Wowhead/Armory parsing. - Rawr.Mage: Fix for calculations being broken on 32bit OSes. - Rawr.Warlock: Lots more work on fleshin...ResizeDragBehavior: ResizeDragBehavior 1.0: First release of the ResizeDragBehavior. Also includes a sampleproject to see how this behavior can be implemented.RoTwee: RoTwee (11.0.0.0): 17316 Follow Visual Studio 2010/.NET Framework 4.0SharePoint Service Account Password Recovery Tool: 1.0: This is the first release of the password recovery toolSilverlightFTP: SilverlightFTP Beta RUS: SilverlightFTP with drag-n-drop support. Russian.SqlCe Viewer (SeasonStar Database Management): SqlCe Viewer(SSDM) 0.0.8.3: 1:Downgrade to .net framework 3.5 sp1 2:Fix some bugs 3:Refactor Mysql EntranceThe Ghost: DEL3SWE: DEL3SWETMap for VS2010: TMap for Visual Studio 2010: TMap for Visual Studio 2010Sogeti has developed a testing process template that integrates the TMap test approach with Visual Studio 2010 (VS2010)....TRXtoHTML: TRXtoHTML v1.1: Minor updateVisual Studio Find Results Window Tweak: Find Results Window Tweak: First stable release of the tool, which enables you to tweak the find results window.Web Service Software Factory: 15 Minute Walkthrough for WSSF2010: This walkthrough provides a very brief introduction for those who either do not have a lot of time for a full introduction, or those who are lookin...Web Service Software Factory: Hands On Lab - Building a Web Service (VS2010): This hands-on lab provides eight exercies to briefly introduce most of the experiences of building a Web service using the Service Factory 2010. Th...Web Service Software Factory: Web Service Software Factory 2010 Source Code: System Requirements • Microsoft Visual Studio 2010 (Premium, Professional or Ultimate Edition) • Guidance Automation Extensions 2010 • Visu...WPF Alphabet: Source Code plus Binaries: Compete C# and WPF source code available below. I have also included the binary for those that just want to run it.WPF AutoCompleteBox for Chinese Spell: CSAutoBox V1.0: This is CSAutoBox V1.0 Beta,if you have any questions,please email me.Most Popular ProjectsRawrWBFS ManagerSilverlight ToolkitAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseWindows Presentation Foundation (WPF)patterns & practices – Enterprise LibraryASP.NETMicrosoft SQL Server Community & SamplesPHPExcelMost Active ProjectsRawrpatterns & practices – Enterprise LibraryBlogEngine.NETIonics Isapi Rewrite FilterFarseer Physics EnginePHPExcelTweetSharpCaliburn: An Application Framework for WPF and SilverlightNB_Store - Free DotNetNuke Ecommerce Catalog ModulePokeIn Comet Ajax Library

    Read the article

  • Clean Up the New Ubuntu Grub2 Boot Menu

    - by Trevor Bekolay
    Ubuntu adopted the new version of the Grub boot manager in version 9.10, getting rid of the old problematic menu.lst. Today we look at how to change the boot menu options in Grub2. Grub2 is a step forward in a lot of ways, and most of the annoying menu.lst issues from the past are gone. Still, if you’re not vigilant with removing old versions of the kernel, the boot list can still end up being longer than it needs to be. Note: You may have to hold the SHIFT button on your keyboard while booting up to get this menu to show. If only one operating system is installed on your computer, it may load it automatically without displaying this menu. Remove Old Kernel Entries The most common clean up task for the boot menu is to remove old kernel versions lying around on your machine. In our case we want to remove the 2.6.32-21-generic boot menu entries. In the past, this meant opening up /boot/grub/menu.lst…but with Grub2, if we remove the kernel package from our computer, Grub automatically removes those options. To remove old kernel versions, open up Synaptic Package Manager, found in the System > Administration menu. When it opens up, type the kernel version that you want to remove in the Quick search text field. The first few numbers should suffice. For each of the entries associated with the old kernel (e.g. linux-headers-2.6.32-21 and linux-image-2.6.32-21-generic), right-click and choose Mark for Complete Removal. Click the Apply button in the toolbar and then Apply in the summary window that pops up. Close Synaptic Package Manager. The next time you boot up your computer, the Grub menu will not contain the entries associated with the removed kernel version. Remove Any Option by Editing /etc/grub.d If you need more fine-grained control, or want to remove entries that are not kernel versions, you must change the files located in /etc/grub.d. /etc/grub.d contains files that hold the menu entries that used to be contained in /boot/grub/menu.lst. If you want to add new boot menu entries, you would create a new file in this folder, making sure to mark it as executable. If you want to remove boot menu entries, as we do, you would edit files in this folder. If we wanted to remove all of the memtest86+ entries, we could just make the 20_memtest86+ file non-executable, with the terminal command sudo chmod –x 20_memtest86+ Followed by the terminal command sudo update-grub Note that memtest86+ was not found by update-grub because it will only consider executable files. However, instead, we’re going to remove the Serial console 115200 entry for memtest86+… Open a terminal window Applications > Accessories > Terminal. In the terminal window, type in the command: sudo gedit /etc/grub.d/20_memtest86+ The menu entries are found at the bottom of this file. Comment out the menu entry for serial console 115200 by adding a “#” to the start of each line. Save and close this file. In the terminal window you opened, enter in the command sudo update-grub Note: If you don’t run update-grub, the boot menu options will not change! Now, the next time you boot up, that strange entry will be gone, and you’re left with a simple and clean boot menu. Conclusion While changing Grub2’s boot menu may seem overly complicated to legacy Grub masters, for normal users, Grub2 means that you won’t have to change the boot menu that often. Fortunately, if you do have to do it, the process is still pretty easy. For more detailed information about how to change entries in Grub2, this Ubuntu forum thread is a great resource. If you’re using an older version of Ubuntu, check out our article on how to clean up Ubuntu grub boot menu after upgrades. Similar Articles Productive Geek Tips Clean Up Ubuntu Grub Boot Menu After UpgradesReinstall Ubuntu Grub Bootloader After Windows Wipes it OutChange the GRUB Menu Timeout on UbuntuHow To Switch to Console Mode for Ubuntu VMware GuestSet Windows as Default OS when Dual Booting Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Daily Motivator (Firefox) FetchMp3 Can Download Videos & Convert Them to Mp3 Use Flixtime To Create Video Slideshows Creating a Password Reset Disk in Windows Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation"

    Read the article

  • Record and Play your WebLogic Console Tasks Like a DVR

    - by james.bayer
    Automation using WebLogic Scripting Tool Today on the Oracle internal mailing list for WebLogic Server questions someone asked how to automate the configuration of the thread model for WebLogic Server and they were having trouble with the jython scripting syntax.  I’ve previously written about this feature called Work Managers and the associated constraints.  However, I did not show how to automate the process of configuring this without the console using WebLogic Scripting Tool – the jython scripting automation environment abbreviated as WLST.  I’ve written some very basic introductions to WLST before and there is also an Oracle By Example on the subject, but this is a bit more advanced.  Fear not because there is a really easy-to-use feature of the WLS console that lets you “Record” user actions just like a DVR.  Using these recordings of the web-based console, you can easily create a script even if you are unfamiliar with the WLST syntax and API.  I’m a big fan of both DVR’s and automation as can be evidenced with this old Halloween picture taken during simpler times.  Obviously the Cast Away and The Big Labowski references show some age.  I was a big Tivo fan-boy back in the day and I still think it’s the best DVR. I strongly believe that WebLogic Scripting Tool (WLST) is an absolutely essential tool for automating administration tasks in anything beyond a development environment.  Even in development environments you can make a case that it makes sense to start the automation for environments downstream.  I promise you that once you start using it for any tasks that you do even semi-regularly, you won’t go back to clicking through the console.  It’s simply so much more efficient and less error-prone to run a script. Let’s say you need to create a Work Manager and MaxThreadsConstraint – the easy way to do it is configure it in the WLS console first while capturing the commands with a recording.  See the images for the simple steps – click to enlarge. Record Console Configurations to a File Review the Recordings and Make Slight Modifications In order to make the recorded .py file directly callable as a stand-alone script I added calls to the connect() and edit() functions at the beginning and calls to disconnect() and exit() at the end – otherwise the main section of the script was provided by the console recording.  Below is the resulting file I saved as d:/temp/wm.py connect('weblogic','welcome1', 't3://localhost:7001') edit() startEdit()   cd('/SelfTuning/wl_server') cmo.createMaxThreadsConstraint('MaxThreadsConstraint-0')   cd('/SelfTuning/wl_server/MaxThreadsConstraints/MaxThreadsConstraint-0') set('Targets',jarray.array([ObjectName('com.bea:Name=examplesServer,Type=Server')], ObjectName)) cmo.setCount(5) cmo.unSet('ConnectionPoolName')   cd('/SelfTuning/wl_server') cmo.createWorkManager('WorkManager-0') cd('/SelfTuning/wl_server/WorkManagers/WorkManager-0') set('Targets',jarray.array([ObjectName('com.bea:Name=examplesServer,Type=Server')], ObjectName))   cmo.setMaxThreadsConstraint(getMBean('/SelfTuning/wl_server/MaxThreadsConstraints/MaxThreadsConstraint-0')) cmo.setIgnoreStuckThreads(false)   activate() disconnect() exit() Run the Script If you want to test it be sure to delete the Work Manager and MaxThreadConstraint that you had previously created in the console.  Do something like the following - set up the environment and tell WLST to execute the script which happens in the first 2 lines, the rest doesn’t require any user input: D:\Oracle\wls11g\wlserver_10.3\samples\domains\wl_server\bin>setDomainEnv.cmd D:\Oracle\wls11g\wlserver_10.3\samples\domains\wl_server>java weblogic.WLST d:\temp\wm.py   Initializing WebLogic Scripting Tool (WLST) ...   Welcome to WebLogic Server Administration Scripting Shell   Type help() for help on available commands   Connecting to t3://localhost:7001 with userid weblogic ... Successfully connected to Admin Server 'examplesServer' that belongs to domain 'wl_server'.   Warning: An insecure protocol was used to connect to the server. To ensure on-the-wire security, the SSL port or Admin port should be used instead.   Location changed to edit tree. This is a writable tree with DomainMBean as the root. To make changes you will need to start an edit session via startEdit().   For more help, use help(edit)   Starting an edit session ... Started edit session, please be sure to save and activate your changes once you are done. Activating all your changes, this may take a while ... The edit lock associated with this edit session is released once the activation is completed. Activation completed Disconnected from weblogic server: examplesServer     Exiting WebLogic Scripting Tool.   Now if you go back and look in the console the changes have been made and we now have a compete script.  Of course there is a full MBean reference and you can learn the nuances of jython and WLST, but why not the WLS console do most of the work for you!  Happy scripting.

    Read the article

  • Error when trying to compile abgx360: C++ compiler cannot create executables

    - by era878
    I am trying to compile the abgx360 GUI. First I run home/eric/Desktop/abgx360-1.0.5/configure but I recieve this error: checking for C++ compiler default output file name... configure: error: C++ compiler cannot create executables See `config.log' for more details. Then i run make but I recieve this error: make: * No rule to make target `/home/eric/Desktop/abgx360-1.0.5/Makefile.am', needed by `/home/eric/Desktop/abgx360-1.0.5/Makefile.in'. Stop. Here is my 'config.log': This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by abgx360gui configure 1.0.2, which was generated by GNU Autoconf 2.61. Invocation command line was $ /home/eric/Desktop/abgx360gui-1.0.2/configure ## --------- ## ## Platform. ## ## --------- ## hostname = Eric-Desktop uname -m = x86_64 uname -r = 2.6.35-27-generic uname -s = Linux uname -v = #48-Ubuntu SMP Tue Feb 22 20:25:46 UTC 2011 /usr/bin/uname -p = unknown /bin/uname -X = unknown /bin/arch = unknown /usr/bin/arch -k = unknown /usr/convex/getsysinfo = unknown /usr/bin/hostinfo = unknown /bin/machine = unknown /usr/bin/oslevel = unknown /bin/universe = unknown PATH: /usr/local/sbin PATH: /usr/local/bin PATH: /usr/sbin PATH: /usr/bin PATH: /sbin PATH: /bin PATH: /usr/games ## ----------- ## ## Core tests. ## ## ----------- ## configure:1800: checking for a BSD-compatible install configure:1856: result: /usr/bin/install -c configure:1867: checking whether build environment is sane configure:1910: result: yes configure:1938: checking for a thread-safe mkdir -p configure:1977: result: /bin/mkdir -p configure:1990: checking for gawk configure:2020: result: no configure:1990: checking for mawk configure:2006: found /usr/bin/mawk configure:2017: result: mawk configure:2028: checking whether make sets $(MAKE) configure:2049: result: yes configure:2302: checking for g++ configure:2332: result: no configure:2302: checking for c++ configure:2332: result: no configure:2302: checking for gpp configure:2332: result: no configure:2302: checking for aCC configure:2332: result: no configure:2302: checking for CC configure:2332: result: no configure:2302: checking for cxx configure:2332: result: no configure:2302: checking for cc++ configure:2332: result: no configure:2302: checking for cl.exe configure:2332: result: no configure:2302: checking for FCC configure:2332: result: no configure:2302: checking for KCC configure:2332: result: no configure:2302: checking for RCC configure:2332: result: no configure:2302: checking for xlC_r configure:2332: result: no configure:2302: checking for xlC configure:2332: result: no configure:2360: checking for C++ compiler version configure:2367: g++ --version >&5 /home/eric/Desktop/abgx360gui-1.0.2/configure: line 2368: g++: command not found configure:2370: $? = 127 configure:2377: g++ -v >&5 /home/eric/Desktop/abgx360gui-1.0.2/configure: line 2378: g++: command not found configure:2380: $? = 127 configure:2387: g++ -V >&5 /home/eric/Desktop/abgx360gui-1.0.2/configure: line 2388: g++: command not found configure:2390: $? = 127 configure:2413: checking for C++ compiler default output file name configure:2440: g++ conftest.cpp >&5 /home/eric/Desktop/abgx360gui-1.0.2/configure: line 2441: g++: command not found configure:2443: $? = 127 configure:2481: result: configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "abgx360gui" | #define PACKAGE_TARNAME "abgx360gui" | #define PACKAGE_VERSION "1.0.2" | #define PACKAGE_STRING "abgx360gui 1.0.2" | #define PACKAGE_BUGREPORT "" | #define PACKAGE "abgx360gui" | #define VERSION "1.0.2" | /* end confdefs.h. */ | | int | main () | { | | ; | return 0; | } configure:2488: error: C++ compiler cannot create executables See `config.log' for more details. ## ---------------- ## ## Cache variables. ## ## ---------------- ## ac_cv_env_CCC_set= ac_cv_env_CCC_value= ac_cv_env_CC_set= ac_cv_env_CC_value= ac_cv_env_CFLAGS_set= ac_cv_env_CFLAGS_value= ac_cv_env_CPPFLAGS_set= ac_cv_env_CPPFLAGS_value= ac_cv_env_CPP_set= ac_cv_env_CPP_value= ac_cv_env_CXXFLAGS_set= ac_cv_env_CXXFLAGS_value= ac_cv_env_CXX_set= ac_cv_env_CXX_value= ac_cv_env_LDFLAGS_set= ac_cv_env_LDFLAGS_value= ac_cv_env_LIBS_set= ac_cv_env_LIBS_value= ac_cv_env_build_alias_set= ac_cv_env_build_alias_value= ac_cv_env_host_alias_set= ac_cv_env_host_alias_value= ac_cv_env_target_alias_set= ac_cv_env_target_alias_value= ac_cv_path_install='/usr/bin/install -c' ac_cv_path_mkdir=/bin/mkdir ac_cv_prog_AWK=mawk ac_cv_prog_make_make_set=yes ## ----------------- ## ## Output variables. ## ## ----------------- ## ACLOCAL='${SHELL} /home/eric/Desktop/abgx360gui-1.0.2/missing --run aclocal-1.10' AMDEPBACKSLASH='' AMDEP_FALSE='' AMDEP_TRUE='' AMTAR='${SHELL} /home/eric/Desktop/abgx360gui-1.0.2/missing --run tar' AUTOCONF='${SHELL} /home/eric/Desktop/abgx360gui-1.0.2/missing --run autoconf' AUTOHEADER='${SHELL} /home/eric/Desktop/abgx360gui-1.0.2/missing --run autoheader' AUTOMAKE='${SHELL} /home/eric/Desktop/abgx360gui-1.0.2/missing --run automake-1.10' AWK='mawk' CC='' CCDEPMODE='' CFLAGS='' CPP='' CPPFLAGS='' CXX='g++' CXXDEPMODE='' CXXFLAGS='' CYGPATH_W='echo' DEFS='' DEPDIR='' ECHO_C='' ECHO_N='-n' ECHO_T='' EGREP='' EXEEXT='' GREP='' INSTALL_DATA='${INSTALL} -m 644' INSTALL_PROGRAM='${INSTALL}' INSTALL_SCRIPT='${INSTALL}' INSTALL_STRIP_PROGRAM='$(install_sh) -c -s' LDFLAGS='' LIBOBJS='' LIBS='' LTLIBOBJS='' MAKEINFO='${SHELL} /home/eric/Desktop/abgx360gui-1.0.2/missing --run makeinfo' OBJEXT='' PACKAGE='abgx360gui' PACKAGE_BUGREPORT='' PACKAGE_NAME='abgx360gui' PACKAGE_STRING='abgx360gui 1.0.2' PACKAGE_TARNAME='abgx360gui' PACKAGE_VERSION='1.0.2' PATH_SEPARATOR=':' SET_MAKE='' SHELL='/bin/bash' STRIP='' VERSION='1.0.2' WX_CFLAGS='' WX_CFLAGS_ONLY='' WX_CONFIG_PATH='' WX_CPPFLAGS='' WX_CXXFLAGS='' WX_CXXFLAGS_ONLY='' WX_LIBS='' WX_LIBS_STATIC='' WX_RESCOMP='' WX_VERSION='' ac_ct_CC='' ac_ct_CXX='' am__fastdepCC_FALSE='' am__fastdepCC_TRUE='' am__fastdepCXX_FALSE='' am__fastdepCXX_TRUE='' am__include='' am__isrc=' -I$(srcdir)' am__leading_dot='.' am__quote='' am__tar='${AMTAR} chof - "$$tardir"' am__untar='${AMTAR} xf -' bindir='${exec_prefix}/bin' build_alias='' datadir='${datarootdir}' datarootdir='${prefix}/share' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' dvidir='${docdir}' exec_prefix='NONE' host_alias='' htmldir='${docdir}' includedir='${prefix}/include' infodir='${datarootdir}/info' install_sh='$(SHELL) /home/eric/Desktop/abgx360gui-1.0.2/install-sh' libdir='${exec_prefix}/lib' libexecdir='${exec_prefix}/libexec' localedir='${datarootdir}/locale' localstatedir='${prefix}/var' mandir='${datarootdir}/man' mkdir_p='/bin/mkdir -p' oldincludedir='/usr/include' pdfdir='${docdir}' prefix='NONE' program_transform_name='s,x,x,' psdir='${docdir}' sbindir='${exec_prefix}/sbin' sharedstatedir='${prefix}/com' sysconfdir='${prefix}/etc' target_alias='' ## ----------- ## ## confdefs.h. ## ## ----------- ## #define PACKAGE_NAME "abgx360gui" #define PACKAGE_TARNAME "abgx360gui" #define PACKAGE_VERSION "1.0.2" #define PACKAGE_STRING "abgx360gui 1.0.2" #define PACKAGE_BUGREPORT "" #define PACKAGE "abgx360gui" #define VERSION "1.0.2" configure: exit 77

    Read the article

  • Detecting Idle Time with Global Mouse and Keyboard Hooks in WPF

    - by jdanforth
    Years and years ago I wrote this blog post about detecting if the user was idle or active at the keyboard (and mouse) using a global hook. Well that code was for .NET 2.0 and Windows Forms and for some reason I wanted to try the same in WPF and noticed that a few things around the keyboard and mouse hooks didn’t work as expected in the WPF environment. So I had to change a few things and here’s the code for it, working in .NET 4. I took the liberty and refactored a few things while at it and here’s the code now. I’m sure I will need it in the far future as well. using System; using System.Diagnostics; using System.Runtime.InteropServices; namespace Irm.Tim.Snapper.Util { public class ClientIdleHandler : IDisposable { public bool IsActive { get; set; } int _hHookKbd; int _hHookMouse; public delegate int HookProc(int nCode, IntPtr wParam, IntPtr lParam); public event HookProc MouseHookProcedure; public event HookProc KbdHookProcedure; //Use this function to install thread-specific hook. [DllImport("user32.dll", CharSet = CharSet.Auto, CallingConvention = CallingConvention.StdCall)] public static extern int SetWindowsHookEx(int idHook, HookProc lpfn, IntPtr hInstance, int threadId); //Call this function to uninstall the hook. [DllImport("user32.dll", CharSet = CharSet.Auto, CallingConvention = CallingConvention.StdCall)] public static extern bool UnhookWindowsHookEx(int idHook); //Use this function to pass the hook information to next hook procedure in chain. [DllImport("user32.dll", CharSet = CharSet.Auto, CallingConvention = CallingConvention.StdCall)] public static extern int CallNextHookEx(int idHook, int nCode, IntPtr wParam, IntPtr lParam); //Use this hook to get the module handle, needed for WPF environment [DllImport("kernel32.dll", CharSet = CharSet.Auto)] public static extern IntPtr GetModuleHandle(string lpModuleName); public enum HookType : int { GlobalKeyboard = 13, GlobalMouse = 14 } public int MouseHookProc(int nCode, IntPtr wParam, IntPtr lParam) { //user is active, at least with the mouse IsActive = true; Debug.Print("Mouse active"); //just return the next hook return CallNextHookEx(_hHookMouse, nCode, wParam, lParam); } public int KbdHookProc(int nCode, IntPtr wParam, IntPtr lParam) { //user is active, at least with the keyboard IsActive = true; Debug.Print("Keyboard active"); //just return the next hook return CallNextHookEx(_hHookKbd, nCode, wParam, lParam); } public void Start() { using (var currentProcess = Process.GetCurrentProcess()) using (var mainModule = currentProcess.MainModule) { if (_hHookMouse == 0) { // Create an instance of HookProc. MouseHookProcedure = new HookProc(MouseHookProc); // Create an instance of HookProc. KbdHookProcedure = new HookProc(KbdHookProc); //register a global hook _hHookMouse = SetWindowsHookEx((int)HookType.GlobalMouse, MouseHookProcedure, GetModuleHandle(mainModule.ModuleName), 0); if (_hHookMouse == 0) { Close(); throw new ApplicationException("SetWindowsHookEx() failed for the mouse"); } } if (_hHookKbd == 0) { //register a global hook _hHookKbd = SetWindowsHookEx((int)HookType.GlobalKeyboard, KbdHookProcedure, GetModuleHandle(mainModule.ModuleName), 0); if (_hHookKbd == 0) { Close(); throw new ApplicationException("SetWindowsHookEx() failed for the keyboard"); } } } } public void Close() { if (_hHookMouse != 0) { bool ret = UnhookWindowsHookEx(_hHookMouse); if (ret == false) { throw new ApplicationException("UnhookWindowsHookEx() failed for the mouse"); } _hHookMouse = 0; } if (_hHookKbd != 0) { bool ret = UnhookWindowsHookEx(_hHookKbd); if (ret == false) { throw new ApplicationException("UnhookWindowsHookEx() failed for the keyboard"); } _hHookKbd = 0; } } #region IDisposable Members public void Dispose() { if (_hHookMouse != 0 || _hHookKbd != 0) Close(); } #endregion } } The way you use it is quite simple, for example in a WPF application with a simple Window and a TextBlock: <Window x:Class="WpfApplication2.MainWindow" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="MainWindow" Height="350" Width="525"> <Grid> <TextBlock Name="IdleTextBox"/> </Grid> </Window> And in the code behind we wire up the ClientIdleHandler and a DispatcherTimer that ticks every second: public partial class MainWindow : Window { private DispatcherTimer _dispatcherTimer; private ClientIdleHandler _clientIdleHandler; public MainWindow() { InitializeComponent(); } private void Window_Loaded(object sender, RoutedEventArgs e) { //start client idle hook _clientIdleHandler = new ClientIdleHandler(); _clientIdleHandler.Start(); //start timer _dispatcherTimer = new DispatcherTimer(); _dispatcherTimer.Tick += TimerTick; _dispatcherTimer.Interval = new TimeSpan(0, 0, 0, 1); _dispatcherTimer.Start(); } private void TimerTick(object sender, EventArgs e) { if (_clientIdleHandler.IsActive) { IdleTextBox.Text = "Active"; //reset IsActive flag _clientIdleHandler.IsActive = false; } else IdleTextBox.Text = "Idle"; } } Remember to reset the ClientIdleHandle IsActive flag after a check.

    Read the article

  • Silverlight 5 &ndash; What&rsquo;s New? (Including Screenshots &amp; Code Snippets)

    - by mbcrump
    Silverlight 5 is coming next year (2011) and this blog post will tell you what you need to know before the beta ships. First, let me address people saying that it is dead after PDC 2010. I believe that it’s best to see what the market is doing, not the vendor. Below is a list of companies that are developing Silverlight 4 applications shown during the Silverlight Firestarter. Some of the companies have shipped and some haven’t. It’s just great to see the actual company names that are working on Silverlight instead of “people are developing for Silverlight”. The next thing that I wanted to point out was that HTML5, WPF and Silverlight can co-exist. In case you missed Scott Gutherie’s keynote, they actually had a slide with all three stacked together. This shows Microsoft will be heavily investing in each technology.  Even I, a Silverlight developer, am reading Pro HTML5. Microsoft said that according to the Silverlight Feature Voting site, 21k votes were entered. Microsoft has implemented about 70% of these votes in Silverlight 5. That is an amazing number, and I am crossing my fingers that Microsoft bundles Silverlight with Windows 8. Let’s get started… what’s new in Silverlight 5? I am going to show you some great application and actual code shown during the Firestarter event. Media Hardware Video Decode – Instead of using CPU to decode, we will offload it to GPU. This will allow netbooks, etc to play videos. Trickplay – Variable Speed Playback – Pitch Correction (If you speed up someone talking they won’t sound like a chipmunk). Power Management – Less battery when playing video. Screensavers will no longer kick in if watching a video. If you pause a video then screensaver will kick in. Remote Control Support – This will allow users to control playback functions like Pause, Rewind and Fastforward. IIS Media Services 4 has shipped and now supports Azure. Data Binding Layout Transitions – Just with a few lines of XAML you can create a really rich experience that is not using Storyboards or animations. RelativeSource FindAncestor – Ancestor RelativeSource bindings make it much easier for a DataTemplate to bind to a property on a container control. Custom Markup Extensions – Markup extensions allow code to be run at XAML parse time for both properties and event handlers. This is great for MVVM support. Changing Styles during Runtime By Binding in Style Setters – Changing Styles at runtime used to be a real pain in Silverlight 4, now it’s much easier. Binding in style setters allows bindings to reference other properties. XAML Debugging – Below you can see that we set a breakpoint in XAML. This shows us exactly what is going on with our binding.  WCF & RIA Services WS-Trust Support – Taken from Wikipedia: WS-Trust is a WS-* specification and OASIS standard that provides extensions to WS-Security, specifically dealing with the issuing, renewing, and validating of security tokens, as well as with ways to establish, assess the presence of, and broker trust relationships between participants in a secure message exchange. You can reduce network latency by using a background thread for networking. Supports Azure now.  Text and Printing Improved text clarity that enables better text rendering. Multi-column text flow, Character tracking and leading support, and full OpenType font support.  Includes a new Postscript Vector Printing API that provides control over what you print . Pivot functionality baked into Silverlight 5 SDK. Graphics Immediate mode graphics support that will enable you to use the GPU and 3D graphics supports. Take a look at what was shown in the demos below. 1) 3D view of the Earth – not really a real-world application though. A doctor’s portal. This demo really stood out for me as it shows what we can do with the 3D / GPU support. Out of Browser OOB applications can now create and manage childwindows as shown in the screenshot below.  Trusted OOB applications can use P/Invoke to call Win32 APIs and unmanaged libraries.  Enterprise Group Policy Support allow enterprises to lock down or up the sandbox capabilities of Silverlight 5 applications. In this demo, he tore the “notes” off of the application and it appeared in a new window. See the black arrow below. In this demo, he connected a USB Device which fired off a local Win32 application that provided the data off the USB stick to Silverlight. Another demo of a Silverlight 5 application exporting data right into Excel running inside of browser. Testing They demoed Coded UI, which is available now in the Visual Studio Feature Pack 2. This will allow you to create automated testing without writing any code manually. Performance: Microsoft has worked to improve the Silverlight startup time. Silverlight 5 provides 64-bit browser support.  Silverlight 5 also provides IE9 Hardware acceleration.   I am looking forward to Silverlight 5 and I hope you are too. Thanks for reading and I hope you visit again soon.  Subscribe to my feed CodeProject

    Read the article

  • Simultaneously calling multiple methods on a WCF service from silverlight

    - by ola karlsson
    A while back I had to debug some performance issues in an existing Silverlight app, as the problem / solution was a bit obscure and finding info about it was quite tricky, I thought I’d share, maybe it can help the next person with this problem. The App On start, the app would do a number of calls to different methods on a WCF service, this to populate the UI with the necessary data. Recently one of those services had been changed and was now taking quite a bit longer than it used to. This was resulting in quite a long loading time for the whole UI, which was set up so it wouldn’t let the user interact with anything, until all the service calls had finished. First I broke out the longer running service call from the others, then removed the constraint that it had to be loaded for the UI in general to become responsive. I also added a loading indicator just on that area of the UI, thinking that the main UI would load while this particular section could keep loading independently. The Problem However this is where things started to get a bit strange. I found that even after these changes, the main UI wouldn’t activate until the long running call returned. So now, I did what I should have done to start with, I got Fiddler out and had a look at what was really happening. What I found was that, once the call to the long running service method was placed, all subsequent call were waiting for that one to return before executing. Not having really worked with WCF previously or knowing much about it in general, I was stumped… I knew of the issues where Silverlight is restricted by the browsers networking features in regards to number of simultaneous connections etc. However that just didn’t seem to be the issue here, you can clearly see in Fiddler that there’s numerous calls, but they’re just not returning. I thought of the problem maybe being in the WCF service, but the calls were really not that complicated and surely the service should be able to handle a lot more than what I was throwing at it! So I did what every developer does in this type of scenario, I hit the search engines. I did a whole bunch of searching on things like “multiple simultaneous WCF calls from Silverlight” and “Calling long running WCF services from Silverlight” etc. etc. This however, pretty much got me nowhere, I found a whole heap of resources on how to do WCF calls from Silverlight but most of them were very basic and of no use what so ever. The fog is clearing It wasn’t until I came across the term “ WCF blocking calls” and started incorporating that in my searches I started to get somewhere. Those searches quite quickly brought me to the following thread in the Silverlight forum “Long-running WCF call blocking subsequent calls” which discussed the exact problem I was facing and the best part, one of the guys there had the solution! The short answer is in the forum post and the guys answering, has also done a more extensive blog post about it called “Silverlight, WCF, and ASP.Net Configuration Gotchas” which covers it very well.  So come on what’s the solution?! I heard you ask, unless you’ve already gone to the links and looked it up ;) The Solution Well, it turns out that the issue is founded in a mix of Silverlight, Asp.Net and WCF, basically if you’re doing multiple calls to a single WCF web-service and you have Asp.Net session state enabled, the calls will be executed sequentially by the service, hence any long running calls will block subsequent ones. So why is Asp.Net session state effecting us, we’re working in Silverlight, right? We'll as mentioned earlier, by default Silverlight uses the browsers networking stack when doing service calls, hence to the WCF service, the call looks like it might as well be coming from a normal Asp.Net. To get around this, we look to a feature introduced in Silverlight 3, namely the Client HTTP Stack. The Client HTTP Stack to the rescue By using the following syntax (for example in our App.xaml.cs, Application_Startup method) WebRequest.RegisterPrefix("http://", WebRequestCreator.ClientHttp); we can set our Silverlight application to use the Client HTTP Stack, which incidentally solves our problem! By using Silverlights own networking stack, rather than that of the browser, we get around the Asp.Net - WCF session state issue. The above code specifies that all calls to addresses starting with “http://” should go through the client stack, this can actually be set more granular and you can specify it to be used only for certain domains etc. Summary The actual solution is well covered in the forum and blog posts I link to above. This post is more about sharing my experience, hopefully helping to spread the word about this and maybe make it a bit easier for the next poor guy with this issue to find the solution. Until next time, Ola

    Read the article

  • How to propagate http response code from back-end to client

    - by Manoj Neelapu
    Oracle service bus can be used as for pass through casses. Some use cases require propagating the http-response code back to the caller. http://forums.oracle.com/forums/thread.jspa?messageID=4326052&#4326052 is one such example we will try to accomplish in this tutorial.We will try to demonstrate this feature using Oracle Service Bus (11.1.1.3.0. We will also use commons-logging-1.1.1, httpcomponents-client-4.0.1, httpcomponents-core-4.0.1 for writing the client to demonstrate.First we create a simple JSP which will always set response code to 304.The JSP snippet will look like <%@ page language="java"     contentType="text/xml;     charset=UTF-8"        pageEncoding="UTF-8" %><%      System.out.println("Servlet setting Responsecode=304");    response.setStatus(304);    response.flushBuffer();%>We will now deploy this JSP on weblogic server with URI=http://localhost:7021/reponsecode/For this JSP we will create a simple Any XML BS We will also create proxy service as shown below Once the proxy is created we configure pipeline for the proxy to use route node, which invokes the BS(JSPCaller) created in the first place. So now we will create a error handler for route node and will add a stage. When a HTTP BS sends a request, the JSP sends the response back. If the response code is not 200, then the http BS will consider that as error and the above configured error handler is invoked. We will print $outbound to show the response code sent by the JSP. The next actions. To test this I had create a simple clientimport org.apache.http.Header;import org.apache.http.HttpEntity;import org.apache.http.HttpHost;import org.apache.http.HttpResponse;import org.apache.http.HttpVersion;import org.apache.http.client.methods.HttpGet;import org.apache.http.conn.ClientConnectionManager;import org.apache.http.conn.scheme.PlainSocketFactory;import org.apache.http.conn.scheme.Scheme;import org.apache.http.conn.scheme.SchemeRegistry;import org.apache.http.impl.client.DefaultHttpClient;import org.apache.http.impl.conn.tsccm.ThreadSafeClientConnManager;import org.apache.http.params.BasicHttpParams;import org.apache.http.params.HttpParams;import org.apache.http.params.HttpProtocolParams;import org.apache.http.util.EntityUtils;/** * @author MNEELAPU * */public class TestProxy304{    public static void main(String arg[]) throws Exception{     HttpHost target = new HttpHost("localhost", 7021, "http");     // general setup     SchemeRegistry supportedSchemes = new SchemeRegistry();     // Register the "http" protocol scheme, it is required     // by the default operator to look up socket factories.     supportedSchemes.register(new Scheme("http",              PlainSocketFactory.getSocketFactory(), 7021));     // prepare parameters     HttpParams params = new BasicHttpParams();     HttpProtocolParams.setVersion(params, HttpVersion.HTTP_1_1);     HttpProtocolParams.setContentCharset(params, "UTF-8");     HttpProtocolParams.setUseExpectContinue(params, true);     ClientConnectionManager connMgr = new ThreadSafeClientConnManager(params,              supportedSchemes);     DefaultHttpClient httpclient = new DefaultHttpClient(connMgr, params);     HttpGet req = new HttpGet("/HttpResponseCode/ProxyExposed");     System.out.println("executing request to " + target);     HttpResponse rsp = httpclient.execute(target, req);     HttpEntity entity = rsp.getEntity();     System.out.println("----------------------------------------");     System.out.println(rsp.getStatusLine());     Header[] headers = rsp.getAllHeaders();     for (int i = 0; i < headers.length; i++) {         System.out.println(headers[i]);     }     System.out.println("----------------------------------------");     if (entity != null) {         System.out.println(EntityUtils.toString(entity));     }     // When HttpClient instance is no longer needed,      // shut down the connection manager to ensure     // immediate deallocation of all system resources     httpclient.getConnectionManager().shutdown();     }}On compiling and executing this we see the below output in STDOUT which clearly indicates the response code was propagated from Business Service to Proxy serviceexecuting request to http://localhost:7021----------------------------------------HTTP/1.1 304 Not ModifiedDate: Tue, 08 Jun 2010 16:13:42 GMTContent-Type: text/xml; charset=UTF-8X-Powered-By: Servlet/2.5 JSP/2.1----------------------------------------  

    Read the article

  • ODEE Green Field (Windows) Part 5 - Deployment and Validation

    - by AndyL-Oracle
    And here we are, almost finished with our installation of Oracle Documaker Enterprise Edition ("ODEE") in a Windows green field environment. Let's recap what we've done so far: In part 1, I went over the basic process that I intended to show with installing an ODEE on a green field server. I walked you through the basic installation of Oracle 11g database In part 2, I covered the installation of WebLogic application server. In part 3, I showed you how to install SOA Suite for WebLogic. In part 4, we did the first part of the installation of ODEE itself. What remains after all of that, is the deployment of the ODEE components onto the database and application server - so let's get to it! DATABASE First, we'll deploy the schemas to the database. The schemas are created during the ODEE installation according to the responses provided during the install process. To deploy the schemas, you'll need to login to the database server in your green field environment. Open a command line and CD into ODEE_HOME\documaker\database\oracle11g.Run SQLPLUS as SYSDBA and execute dmkr_admin.sql:  sqlplus / as sysdba @dmkr_admin.sql Execute dmkr_asline.sql, dmkr_admin_correspondence_example.sql.  If you require additional languages, run the appropriate SQL scripts (e.g. dmkr_asline_es.sql for Spanish). APPLICATION SERVER Next, we'll deploy the WebLogic domain and it's components - Documaker web services, Documaker Interactive, Documaker dashboard, and more. To deploy the components, you'll need to login to the application server in your green field environment. 1. Open Windows Explorer and navigate to ODEE_HOME\documaker\j2ee\weblogic\oracle11g\scripts.2. Using a text editor such as Notepad++, modify weblogic_installation_properties and set location of MIDDLEWARE_HOME and ODEE HOME. If you have used the defaults you’ll probably need to change the E: to C: and that’s it. Save the changes.3. Continuing in the same directory, use your text editor to modify set_middleware_env.cmd and set the drive and path to MIDDLEWARE_HOME. If you have used the defaults you’ll probably need to just change E: to C: and that’s it. Save the changes.4. In the same directory, execute wls_create_domain.cmd by double-clicking it. This should run to completion. If it does not, review any errors and correct them, and rerun the script.5. In the same directory, execute wls_add_correspondence.cmd by double-clicking it - again this should run to completion. 6. Next, we'll start the AdminServer - this is the main WebLogic domain server. To start it, use Windows Explorer and navigate to MIDDLEWARE_HOME\user_projects\domains\idocumaker_domain. Double-click startWebLogic.cmd and the server startup will begin. Once you see output that indicates that the server status changed to RUNNING you may proceed.  a. Note: if you saw database connection errors, you probably didn’t make sure your database name and connection type match. You can change this manually in the WebLogic Console. Open a browser and navigate to http://localhost:7001/console (replace localhost with the name of your application server host if you aren't opening the browser on the server), and login with the the weblogic credential you provided in the ODEE installation process. b. Once you're logged in, open Services?Data Sources. Select dmkr_admin and click Connection Pool.  c. The end of the URL should match the connection type you chose. If you chose ServiceName, the URL should be: jdbc:oracle:thin:@//<hostname>:1521/<serviceName> and if you chose SID, the URL should be: jdbc:oracle:thin:@//<hostname>:1521/<SIDname> d. An example serviceName is a fully qualified DNS-style name, e.g. "idmaker.us.oracle.com". (It does not need to actually resolve in DNS). An example SID is just a name, e.g. IDMAKER. e. Save the change and repeat for the data source dmkr_asline.  f. You will also need to make the same changes in the ODEE_HOME/documaker/docfactory/config/context/.bindings file - open the file in a text editor, locate the URL lines and make the appropriate change, then save the file.  7. Back in the ODEE_HOME\documaker\j2ee\weblogic\oracle11g\scripts directory, execute create_users_groups.cmd. 8. In the same directory, execute create_users_groups_correspondence_example.cmd. 9. Open a browser and navigate to http://localhost:7001/jpsquery. Replace localhost with the name of your application server host if you aren't running the browser on the application server. If you changed the default port for the AdminServer from 7001, use the port you changed it to. You should see output like this: 10. Start the WebLogic managed servers by opening a command prompt and navigating to MIDDLEWARE_HOME/user_projects/domains/idocumaker_domain/bin/. When you start the servers listed below, you will be prompted to enter the WebLogic credentials to start the server. You can prevent this by providing the credential in the startManagedwebLogic.cmd file for the WLS_USER and WLS_PASS values. Note that the credential will be stored in cleartext. To start the server, type in the command shown. a. Start the JMS Server: ./startManagedWebLogic.cmd jms_server b. Start Dashboard/Documaker Administrator: ./startManagedWebLogic.cmd dmkr_server c. Start Documaker Interactive for Correspondence: ./startManagedWebLogic.cmd idm_server SOA Composites  If you're planning on testing out the approval process components of BPEL that can be used with Documaker Interactive, then use the following steps to deploy the SOA composites. If you're not going to use BPEL, you can skip to the next section.1. Stop the servers listed in the previous section (Step 10) in the reverse order that they were started.2. Run the Domain configuration command: navigate to and execute MIDDLEWARE_HOME/wlserver_10.3/common/bin/config.cmd.3. Select Extend and click next. 4. Select the iDocumaker Domain and click Next. 5. Select the Oracle SOA Suite – 11.1.1.0 (this may automatically select other components which is OK). Click Next. 6. View the Configure JDBC resources screen. You should not make any changes. Click Next. 7. Check both connections and click Test Connections. After successful test, click Next. If the tests fail, something is broken. Go back to configure JDBC resources and check your service name/SID. 8. Check all schemas. Set a password (will be the same for all schemas). Enter the database information (service name, host name, port). Click Next. 9. Connections should test successfully. If not, go back and fix any errors. Click Next. 10. Click Next to pass through Optional Configuration. 11. Click Extend. 12. Click Done. 13. Open a terminal window and navigate to/execute: ODEE_HOME/documaker/j2ee/weblogic/oracle11g/bpel/antbuild.cmd14. Start the WebLogic Servers – AdminServer, jms_server, dmkr_server, idm_server. If you forgot how to do this, see the previous section Step 10. Note: if you previously changed the startManagedWebLogic.cmd script for WLS_USER and WLS_PASS you will need to make those changes again. 15. Start the WebLogic server soa_server1: MIDDLEWARE_HOME/user_projects/domains/idocumaker_domain/bin/startManagedWebLogic.cmd soa_server116. Open a browser to http://localhost:7001/console and login. 17. Navigate to Services?Data Sources and select DMKR_ASLINE. 18. Click the Targets tab. Check soa_server1, then click Save. Repeat for the DMKR_ADMIN data source. 19. Open a command prompt and navigate to ODEE_HOME/j2ee/weblogic/oracle11g/scripts, then execute deploy_soa.cmd. That's it! (As if that wasn't enough?) DOCUMAKER Deploy the sample MRL resources by navigating to/executing ODEE_HOME/documaker/mstrres/dmres/deploysamplemrl.bat. You should see approximately 500 resources deployed into the database. Start the Factory Services. Start?Run?services.msc. Locate the service named "ODDF xxxx" and right-click, select Start. Note that each Assembly Line has a separate Factory setup, including its own Factory service and Docupresentment service. The services are named for the assembly line and the machine on which they are installed (because you could have multiple machines servicing a single assembly line, so this allows for easy scripting to control all the services if you choose to do so. Repeat for the Docupresentment service. Note that each Assembly Line has a separate Docupresentment. Using Windows Explorer, navigate to ODEE_HOME/documaker/mstrres/dmres/input and select one of the XML files, and copy it into ODEE_HOME/documaker/hotdirectory. Note: if you chose a different hot directory during installation, copy the file there instead. Momentarily you should see the XML file disappear! Open browser and navigate to http://localhost:10001/DocumakerDashboard (previous versions 12.0-12.2 use http://localhost:10001/dashboard) and verify that job processed successfully. Note that some transactions may fail if you do not have a properly configured email server, and this is ok. You can set up a simple SMTP server (just search the internet for "SMTP developer" and you'll get several to choose from.  So... that's it? Where are we at this point? You now have a completely functional ODEE installation, from soup to nuts as they say. You can further expand your installation by doing some of the following activities: clustering WebLogic services configuring WebLogic for redundancy configuring Oracle 11g for RAC adding additional Factory servers for redundancy/processing capacity setting up a real MRL (instead of the sample resources) testing Documaker Web Services for job submission and more!  I certainly hope you've enjoyed this and find it useful. If you find yourself running into trouble, visit the Oracle Community for Documaker - there is plenty of activity there and you can ask questions. For more concentrated assistance, you can engage an Oracle consultant who is a subject matter expert to assist you. Feel free to email me [andy (dot) little (at) oracle (dot) com] and I can connect you with the appropriate resource to get started. Best of luck! -Andy 

    Read the article

  • Dynamic Data Connections

    - by Tim Dexter
    I have had a long running email thread running between Dan and David over at Valspar and myself. They have built some impressive connectivity between their in house apps and BIP using web services. The crux of their problem has been that they have multiple databases that need the same report executed against them. Not such an unusual request as I have spoken to two customers in the last month with the same situation. Of course, you could create a report against each data connection and just run or call the appropriate report. Not too bad if you have two or three data connections but more than that and it becomes a maintenance nightmare having to update queries or layouts. Ideally you want to have just a single report definition on the BIP server and to dynamically set the connection to be used at runtime based on the user or system that the user is in. A quick bit of digging and help from Shinji on the development team and I had an answer. Rather embarassingly, the solution has been around since the Oct 2010 rollup patch last year. Still, I grabbed the latest Jan 2011 patch - check out Note 797057.1 for the latest available patches. Once installed, I used the best web service testing tool I have yet to come across - SoapUI. Just point it at the WSDL and you can check out the available services and their parameters and then test them too. The XML packet has a new dynamic data source entry. You can set you own custom JDBC connection or just specify an existing data source name thats defined on the server. <pub:runReport> <pub:reportRequest> <pub:attributeFormat>xml</pub:attributeFormat> <pub:attributeTemplate>0</pub:attributeTemplate> <pub:byPassCache>true</pub:byPassCache> <pub:dynamicDataSource> <pub:JDBCDataSource> <pub:JDBCDriverClass></pub:JDBCDriverClass> <pub:JDBCDriverType></pub:JDBCDriverType> <pub:JDBCPassword></pub:JDBCPassword> <pub:JDBCURL></pub:JDBCURL> <pub:JDBCUserName></pub:JDBCUserName> <pub:dataSourceName>Conn1</pub:dataSourceName> </pub:JDBCDataSource> </pub:dynamicDataSource> <pub:reportAbsolutePath>/Test/Employee Report/Employee Report.xdo</pub:reportAbsolutePath> </pub:reportRequest> <pub:userID>Administrator</pub:userID> <pub:password>Administrator</pub:password> </pub:runReport> So I have Conn1 and Conn2 defined that are connections to different databases. I can just flip the name, make the WS call and get the appropriate dataset in my report. Just as an example, here's my web service call java code. Just a case of bringing in the BIP java libs to my java project. publicReportServiceService = new PublicReportServiceService(); PublicReportService publicReportService = publicReportServiceService.getPublicReportService_v11(); String userID = "Administrator"; String password = "Administrator"; ReportRequest rr = new ReportRequest(); rr.setAttributeFormat("xml"); rr.setAttributeTemplate("1"); rr.setByPassCache(true); rr.setReportAbsolutePath("/Test/Employee Report/Employee Report.xdo"); rr.setReportOutputPath("c:\\temp\\output.xml"); BIPDataSource bipds = new BIPDataSource(); JDBCDataSource jds = new JDBCDataSource(); jds.setDataSourceName("Conn1"); bipds.setJDBCDataSource(jds); rr.setDynamicDataSource(bipds); try { publicReportService.runReport(rr, userID, password); } catch (InvalidParametersException e) { e.printStackTrace(); } catch (AccessDeniedException e) { e.printStackTrace(); } catch (OperationFailedException e) { e.printStackTrace(); } } Note, Im no java whiz kid or whizzy old bloke, at least not unless Ive had a coffee. JDeveloper has a nice feature where you point it at the WSDL and it creates everything to support your calling code for you. Couple of things to remember: 1. When you call the service, remember to set the bypass the cache option. Forget it and much scratching of your head and taking my name in vain will ensue. 2. My demo actually hit the same database but used two users, one accessed the base tables another views with the same name. For far too long I thought the connection swapping was not working. I was getting the same results for both users until I realized I was specifying the schema name for the table/view in my query e.g. select * from EMP.EMPLOYEES. So remember to have a generic query that will depend entirely on the connection. Its a neat feature if you want to be able to switch connections and only define a single report and call it remotely. Now if you want the connection to be set dynamically based on the user and the report run via the user interface, thats going to be more tricky ... need to think about that one!

    Read the article

  • Task-It Webinar - Source Code

    Last week I presented a webinar called "Building a real-world application with RadControls for Silverlight 4". For those that didn't get to see the webinar, you can view it here: Building a read-world application with RadControls for Silverlight 4 Since the webinar I've received several requests asking if I could post the source code for the simple application I showed demonstrating some of the techniques used in the development of Task-It, such as MVVM, Commands and Internationalization. This source code is now available for downloadhere. After downloading the source: Extract it to the location of your choice on your hard-drive Open the solution Right-click ModuleProject.Web and selecte 'Set as StartUp Project'. Right-click ProjectTestPage.aspx and selected 'Set as Start Page' Create a database in SQL Server called WebinarProject. Navigate to the Database folder under the WebinarProject directory and run the .sql script against your WebinarProject database. The last two steps are necessary only for the Tasks page to work properly (using WCF RIA Services). Now some notes about each page: Code-behind This is not the way I recommend coding a line-of-business application in Silverlight, but simply wanted to show how the code-behind approach would look. Command This page introduces MVVM and Commands. You'll notice in the XAML that the Command property of theRadMenuItem and the Button are both bound to a SaveCommand. That comes from the view model. If you look in the code- behind of the user control you'll see that an instance of a CommandViewModel is instantiated and set as the DataContext of the UserControl.There is also a listener for the view model's SaveCompleted event. When this is fired, it tells the view (UserControl) to display the MessageBox. Internationalization This sample is similar to the previous one, but instead of using hard-coded strings in the UI, the strings are obtained via binding toview model properties. The view model gets the strings from the .resx files (Strings.resx or Strings.de.resx) under Assets/Resources. If you uncomment the call to ShowGerman() in App.xaml.cs's Application_Startup method and re-run the application, you will see the UI in German. Note that this code, which sets the CurrentCulture and CurrentUICulture on the current thread to "de" (German) is for testing purposes only. RadWindow Once again, very similar to the previous example.The difference is that we are now using a RadWindow to display the 'Saved' message instead of a MessageBox. The advantage here is that we do not have to hold on to a reference to the view model in our code behind so that we can get the 'Saved' message from it. The RadWindow's DataContext is now also bound to the view model, so within its XAML we can bind directly to properties in the view model. Much nicer, and cleaner. One other thing I introduced in this example is the use of spacer Rectangles. Rather than setting a width and/or height on the rectangles for spacing, I am now referencing a style in my ResourceDictionary called StandardSpacerStyle. I like doing this better than using margins or padding because now I have a reusable way to create space between elements, the Rectangle does not show (because I have not set its Fill color), and I can change my spacing throughout the user interface in one place if I'd like. Tasks This page is quite a bit different than the other four. It is a very simple, stripped-down version of the Tasks page in the Task-It application. The Tasks.xaml UserControl has a ContentControl, and the Content of that control is set based on whether we are looking at the list of tasks or editing a task. So it displays one of two child UserControls, which are called List and Details. List has the RadGridView, Details has the form. In the code-behind of the Tasks UserControl I am once again setting its DataContext to a view model class. The nice thing is, whichever child UserControl is being displayed (List or Details) inherits its DataContext from its parent control (Tasks), so I do not have to explicitly set it. The List UserControl simply displays a RadGridView whose ItemsSource is bound to a property in the view model called Tasks, and its SelectedItem property is bound to a property in the view model called SelectedItem. The SelectedItem binding must be TwoWay so that the view is notified when the SelectedItem changes in the view model, and the view model is notified when something changes in the view (like when a user changes the Name and/or DueDate in the form). You'll also notice that the form's TextBox and RadDatePicker are also TwoWay bound to the SelectedItem property in the view model. You can experiment with the binding by removing TwoWay and see how changes in the form do not show up in the RadGridView. So here we have an example of two different views (List and Details) that are both bound to the same view model...and actually, so is the Tasks UserControl, so it is really three views. WCF RIA Services By the way, I am using WCF RIA Services to retrieve data for the RadGridView and save the data when the user clicks the Save button in the form. I created a really simple ADO.NET Entity Data Model in WebinarProject.Web called DataModel.edmx. I also created a simple Domain Data Service called DataService that has methods for retrieving data, inserting, updating and deleting. However I am only using the retrieval and update methods in this sample. Note that I do not currently have any validation in place on the form, as I wanted to keep the sample as simple as possible. Wrap up Technically, I should move the calls to WCF RIA Services out of the view model and put them into a separate layer, but this works for now, and that is a topic for another day! Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • SQL SERVER – Solution – Puzzle – SELECT * vs SELECT COUNT(*)

    - by pinaldave
    Earlier I have published Puzzle Why SELECT * throws an error but SELECT COUNT(*) does not. This question have received many interesting comments. Let us go over few of the answers, which are valid. Before I start the same, let me acknowledge Rob Farley who has not only answered correctly very first but also started interesting conversation in the same thread. The usual question will be what is the right answer. I would like to point to official Microsoft Connect Items which discusses the same. RGarvao https://connect.microsoft.com/SQLServer/feedback/details/671475/select-test-where-exists-select tiberiu utan http://connect.microsoft.com/SQLServer/feedback/details/338532/count-returns-a-value-1 Rob Farley count(*) is about counting rows, not a particular column. It doesn’t even look to see what columns are available, it’ll just count the rows, which in the case of a missing FROM clause, is 1. “select *” is designed to return columns, and therefore barfs if there are none available. Even more odd is this one: select ‘blah’ where exists (select *) You might be surprised at the results… Koushik The engine performs a “Constant scan” for Count(*) where as in the case of “SELECT *” the engine is trying to perform either Index/Cluster/Table scans. amikolaj When you query ‘select * from sometable’, SQL replaces * with the current schema of that table. With out a source for the schema, SQL throws an error. so when you query ‘select count(*)’, you are counting the one row. * is just a constant to SQL here. Check out the execution plan. Like the description states – ‘Scan an internal table of constants.’ You could do ‘select COUNT(‘my name is adam and this is my answer’)’ and get the same answer. Netra Acharya SELECT * Here, * represents all columns from a table. So it always looks for a table (As we know, there should be FROM clause before specifying table name). So, it throws an error whenever this condition is not satisfied. SELECT COUNT(*) Here, COUNT is a Function. So it is not mandetory to provide a table. Check it out this: DECLARE @cnt INT SET @cnt = COUNT(*) SELECT @cnt SET @cnt = COUNT(‘x’) SELECT @cnt Naveen Select 1 / Select ‘*’ will return 1/* as expected. Select Count(1)/Count(*) will return the count of result set of select statement. Count(1)/Count(*) will have one 1/* for each row in the result set of select statement. Select 1 or Select ‘*’ result set will contain only 1 result. so count is 1. Where as “Select *” is a sysntax which expects the table or equauivalent to table (table functions, etc..). It is like compilation error for that query. Ramesh Hi Friends, Count is an aggregate function and it expects the rows (list of records) for a specified single column or whole rows for *. So, when we use ‘select *’ it definitely give and error because ‘*’ is meant to have all the fields but there is not any table and without table it can only raise an error. So, in the case of ‘Select Count(*)’, there will be an error as a record in the count function so you will get the result as ’1'. Try using : Select COUNT(‘RAMESH’) and think there is an error ‘Must specify table to select from.’ in place of ‘RAMESH’ Pinal : If i am wrong then please clarify this. Sachin Nandanwar Any aggregate function expects a constant or a column name as an expression. DO NOT be confused with * in an aggregate function.The aggregate function does not treat it as a column name or a set of column names but a constant value, as * is a key word in SQL. You can replace any value instead of * for the COUNT function.Ex Select COUNT(5) will result as 1. The error resulting from select * is obvious it expects an object where it can extract the result set. I sincerely thank you all for wonderful conversation, I personally enjoyed it and I am sure all of you have the same feeling. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: CodeProject, Pinal Dave, PostADay, Readers Contribution, Readers Question, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology

    Read the article

< Previous Page | 362 363 364 365 366 367 368 369 370 371 372 373  | Next Page >