Search Results

Search found 14152 results on 567 pages for 'private'.

Page 415/567 | < Previous Page | 411 412 413 414 415 416 417 418 419 420 421 422  | Next Page >

• Technology mash: is this possible?

  - by Jon Story

  I'm in the process of setting up my own DNS+hosting on a couple of VPS and my home machines, mostly for academic/learning purposes, but also for convenient accessing of my files, hosting my personal websites, private git repositories etc. I've got a main web server with DNS, and a slave DNS server. I've also got a couple of machines at home doing file hosting, video streaming and all that fun stuff. I'm intending to use my VPS's to provide myself with a dynamic DNS system so that I can point mydomain.com at my DNS servers, with home.mydomain.com going into my home network via a raspberry pi. HOWEVER.... I've not got access to the network infrastructure at home (rented accommodation with managed internet), so I can't forward the ports on the router to my own machines. As such, I'm wondering if it's possible to route all the traffic via an SSH/HTTP tunnel through one of the VPS? My plan is to have the raspberry pi provide a VPN into my home network. The raspberry pi uses SSH to connect to the VPS, and the VPS forwards any traffic to home.mydomain.com via the tunnel to the raspberry pi. Is this even possible, and how do I go about it? I don't mind getting my hands dirty with coding and low level tools, I'm just not sure where to start or what the best way to go about it is.

  Read the article

• The best way to hide data Encryption,Connection,Hardware

  - by Tico Raaphorst

  So to say, if i have a VPS which i own now, and i wanted to make the most secure and stable system that i can make. How would i do that? Just to try: I installed debian 7 with LVM Encryption via installation: You get the 2 partitions a /boot and a encrypted partition. When booting you will be prompted to fill in the password to unlock the encryption of the encrypted partition, Which then will have more partitions like /home /usr and swapspace which will automatically mount. Now, i do need to fill in the password over a VNC-SSL connection via the control panel website of the VPS hoster, so they can see my disk encryption password if they wanted to, they have the option if they wanted to look at what i have as data right? Data encryption on VPS , Is it possible to have a 100% secure virtual private server? So lets say i have my server and it is sitting well locked next to me, with the following examples covered bios (you have to replace bios) raid (you have to unlock raid-config) disk (you have to unlock disk encryption) filelike-zip-tar (files are stored in encrypted archives) which are in some other crypted file mounted as partition (archives mounted as partitions) all on the same system So it will be slow but it would be extremely difficult to crack the encryption. So to say if you stole the server. Then i only need to make the connection like ssh safer with single use passwords, block all incoming and outgoing connections but give one "exception" for myself. And maybe one for if i somehow lose my identity for the "exeption" What other overkill but realistic security options are available, i have heard about SElinux?

  Read the article

• How can I "filter" postfix-generated bounce messages?

  - by Flimzy

  We are using postfix 2.7 and custom SMTPD (based on qpsmtpd) in highly customized configuration for spam filtering. We have a new requirement to filter postfix-generated bounces through our custom qpsmtpd process (not so much for content filtering, but to process these bounces accordingly). Our current configuration looks (in part) like this: main.cf (only customizations shown): 2526 inet n - - - 0 cleanup pickup fifo n - - 60 1 pickup -o content_filter=smtp:127.0.0.2 Our smtpd injects messages to postfix on port 2526, by speaking directly to the cleanup daemon. And the custom pickup command instructs postfix to hand off all locally-generated mail (from cron, nagios, or other custom scripts) to our custom smtpd. The problem is that this configuration does not affect postfix generated bounce messages, since they do not go through the pickup daemon. I have tried adding the same content_filter option to the bounce daemon commands, but it does not seem to have any effect: bounce unix - - - - 0 bounce -o content_filter=smtp:127.0.0.2 defer unix - - - - 0 bounce -o content_filter=smtp:127.0.0.2 trace unix - - - - 0 bounce -o content_filter=smtp:127.0.0.2 For reference, here is my main.cf file, as well: biff = no # TLS parameters smtpd_tls_loglevel = 0 smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${queue_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${queue_directory}/smtp_scache smtp_tls_security_level = may mydestination = $myhostname alias_maps = proxy:pgsql:/etc/postfix/dc-aliases.cf transport_maps = proxy:pgsql:/etc/postfix/dc-transport.cf # This is enforced on incoming mail by QPSMTPD, so this is simply # the upper possible bound (also enforced in defaults.pl) message_size_limit = 262144000 mailbox_size_limit = 0 # We do our own message expiration, but if we set this to 0, then postfix # will try each mail delivery only once, so instead we set it to 100 days # (which is the max postfix seems to support) maximal_queue_lifetime = 100d hash_queue_depth = 1 hash_queue_names = deferred, defer, hold I also tried adding the internal_mail_filter_classes option to main.cf, but also tono affect: internal_mail_filter_classes = bounce,notify I am open to any suggestions, including handling our current content-filtering-loop in a different way. If it's not clear what I'm asking, please let me know, and I can try to clarify.

  Read the article

• RPC Server Unavailable on Hyper-V cluster when moving resources after the host adapter has failed

  - by Doug Luxem

  On a Windows 2008 R2 SP1 cluster running Hyper-V, a lost network connectivity on the primary host interface. The interface was rapidly flapping up and down, and this was later determined to be caused by a faulty switch port. As this was a clustered server, the host interface was not fault tolerant (seeing as how the whole server was fault tolerant), so connectivity to the host was going up and down. The Hyper-V guests were completely unaffected by the network outage as they used a dedicated trunk on the server separate from the host interface. Additionally, dedicated interfaces for the cluster and live migration networks were fine. In order to diagnose the server, I tried to move all resources (Hyper-V Guests) to other nodes through Failover Cluster Manager. These moves failed with an error RPC Server Unavailable. The only way to move resources was by shutting down the guests, stopping the cluster service on the Node A, allowing other nodes to take ownership of the resources, and restarting the guests. A few other notes: All nodes have Client for MS Networks and File & Printer Sharing enabled on the Cluster and LM networks. Node A was accessible over cluster and LM networks from other nodes (these are private, cluster-only networks); pingable, CIFs, etc. Accessing \\NODEA is done over the Host adapters, as you would expect in this case and is the reason for the RPC Server Unavailable error with that adapter being down. My questions here are - Is there a way to still use Live Migration in a failure scenario such as this to prevent shutting down the Hyper-V guests? How can the network be reconfigured in the future so that the cluster service attempts to use the cluster and/or live migration networks to issue the RPC requests?

  Read the article

• Possible Solution for Setting up a Linux VPN Server to Encrypt WLAN Traffic of Macs and iPhones on

  - by GorillaPatch

  I would like to set up a VPN server on debian linux to encrypt wireless traffic coming from my Mac or iOS device. I would like to use a certificate-based solution. Setting up a PKI infrastructure and managing certificates is OK for me. 1. Which server to pick? By looking through the internet and here on stackoverflow I found the following possible solutions: strongSwan IPSec and racoon Which solution is feasible for a linode running debian squeeze? 2. How to configure the network? If I understood correctly a VPN has a virtual network interface as an endpoint on the server side. Naively I would think that I need a DHCP server running on the server to assign a dynamic private IP (like of the class C network 192.168.xxx.xxx) to the connecting clients. Next I think I would need to set up masquerading to NAT the incoming VPN traffic to the real interface directly connected to the internet. Is this the right way to go? Do you have any configuration examples? I often saw VPN configurations used to connect to your home network, but that is not what I am looking for. I have a server up in the internet and want to use it as a proxy to encrypt traffic in insecure network environments like public WLANs.

  Read the article

• OpenSSL error while running punjab

  - by Hunt

  i ran punjab - BOSH connection manager - using twistd -y punjab.tac command in my centos but i am getting following error Unhandled Error Traceback (most recent call last): File "/usr/local/lib/python2.7/site-packages/twisted/application/app.py", line 652, in run runApp(config) File "/usr/local/lib/python2.7/site-packages/twisted/scripts/twistd.py", line 23, in runApp _SomeApplicationRunner(config).run() File "/usr/local/lib/python2.7/site-packages/twisted/application/app.py", line 386, in run self.application = self.createOrGetApplication() File "/usr/local/lib/python2.7/site-packages/twisted/application/app.py", line 451, in createOrGetApplication application = getApplication(self.config, passphrase) --- <exception caught here> --- File "/usr/local/lib/python2.7/site-packages/twisted/application/app.py", line 462, in getApplication application = service.loadApplication(filename, style, passphrase) File "/usr/local/lib/python2.7/site-packages/twisted/application/service.py", line 405, in loadApplication application = sob.loadValueFromFile(filename, 'application', passphrase) File "/usr/local/lib/python2.7/site-packages/twisted/persisted/sob.py", line 210, in loadValueFromFile exec fileObj in d, d File "punjab.tac", line 39, in <module> '/etc/pki/tls/cert.pem', File "/usr/local/lib/python2.7/site-packages/twisted/internet/ssl.py", line 68, in __init__ self.cacheContext() File "/usr/local/lib/python2.7/site-packages/twisted/internet/ssl.py", line 78, in cacheContext ctx.use_privatekey_file(self.privateKeyFileName) OpenSSL.SSL.Error: [('x509 certificate routines', 'X509_check_private_key', 'key values mismatch')] Failed to load application: [('x509 certificate routines', 'X509_check_private_key', 'key values mismatch')] my configuration file of punjab is sslContext = ssl.DefaultOpenSSLContextFactory( '/etc/pki/tls/private/ca.key', '/etc/pki/tls/cert.pem', ) How can i resolve above error

  Read the article

• Does anyone know how to "tcpdump" traffic decrypted by Mallory MITM? [migrated]

  - by chriv

  I'm looking for some help in capturing network traffic that I can analyze in Wireshare (or other tools). The tool I'm using is mallory. If anyone is familiar with mallory, I could use some help. I've got it configured and running correctly, but I don't know how to get the output that I want. The setup is on my private network. I have a VM (running Ubuntu 12.04 - precise) with two NICs: eth0 is on my "real" network eth1 is only on my "fake" network, and is using dnsmasq (for DNS and DHCP for other devices on the "fake" network) Effectively eth0 is the "WAN" on my VM, and eth1 is the "LAN" on my VM. I've setup mallory and iptables to intercept, decrypt, encrypt and rewrite all traffic coming in on destination port 443 on eth1. On the device I want intercepted, I have imported the ca.cer that mallory generated as a trusted root certificate. I need to analyze some strange behavior in the HTTPS stream between the client and server, so that's why mallory is setup in between for this MITM. I would like to take the decrypted HTTPS traffic and dump it to either a logfile or a socket in a format compatible with tcpdump/wireshark (so I can collect it later and analyze it). Running tcpdump on eth1 is too soon (it's encrypted), and running tcpdump on eth2 is too late (it's been re-encrypted). Is there a way to make mallory "tcpdump" the decrypted traffic (in both directions)?

  Read the article

• Slow RDP after server joins domain

  - by Chris Grove

  We're having RDP issues with Amazon cloud servers that we recently joined to an Active Directory domain. The setup is: A local office network A virtual private cloud in Amazon An IPSec tunnel between the two networks A number of Windows 2008 R2 servers on both networks An AD domain (call it abc.net), with one domain controller in each network. The domain controllers are both new, fresh installs. Before we had the domain set up we had local accounts for the cloud computers which were used for RDP access. Our idea was to get all of the servers on to the domain so we could use domain logins instead of per-server local logins. Before the cloud servers were in the domain, RDP (from the office network or through a VPN to the cloud) worked great. After we joined the cloud servers to the domain, RDP from the office became very slow - a few minutes to log in, long frequent pauses when the interface is unresponsive, generally just a slow and frustrating experience. This is a problem regardless of whether a domain or local login is used for RDP. Oddly, when outside of the office network and connecting to the cloud directly with the VPN, RDP is still very responsive. Any idea why RDP from office to cloud is suddenly very slow after the cloud servers join the domain? What can I look at in our configuration to address this? Any help is greatly appreciated.

  Read the article

• Sharing between Vista and Windows 7

  - by Metro Smurf

  Vista Ultimate 32 bit Windows 7 Ultimate 64 bit I've read through similar questions about sharing between Win7 and Vista, but none of them have resolved my issue of not being able to share between Win7 and Vista: Connecting to a Vista shared folder from Windows 7 Networking Windows 7 and Vista Enable File sharing in Windows Vista Previously I had previously had my Vista and XP system sharing back and forth without any problems. I was able to access the shares without entering a user name / password in the NT challenge prompt (note: account names and passwords were different on the Vista and XP systems). Currently I replaced my XP system with a Win7 system. Now, when I attempt to access shares to/from Vista / Win7, I am continually prompted with an NT challenge to enter my credentials. Things I've Verified/Tried Both systems are on the same workgroup. Win 7 is using the Home network. Vista is using the Private network. In other words, neither system is using a Public network profile. Enabled file sharing with and without password protection on both Vista and Win7 Tried HomeGroup Connections (win7) with Windows to manage connections and Use user accounts to connect. Reviewed too many online articles to count to trouble shoot. Set the shares to have full control by everyone. Set up the shares directly on the directory and through the share manager. My Question How can I enable file sharing between Vista and Win7 without being prompted with a username/password challenge, ever?

  Read the article

• Password-less login into localhost

  - by Brad

  I am trying to setup password-less login into my localhost because it's required for a tutorial. I went through the normal steps of generating an rsa key and appending the public key to authorized_keys but I am still prompted for a password. I've also enabled RSAAuthentication and PubKeyAuthentication in /etc/ssh_config. Following other suggestions I've seen, I tried: chmod go-w ~/ chmod 700 ~/.ssh chmod 600 ~/.ssh/authorized_keys But the problem persists. Here is the output from ssh -v localhost: (tutorial)bnels21-2:tutorial bnels21$ ssh -v localhost OpenSSH_5.9p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /etc/ssh_config debug1: /etc/ssh_config line 20: Applying options for * debug1: Connecting to localhost [::1] port 22. debug1: Connection established. debug1: identity file /Users/bnels21/.ssh/id_rsa type 1 debug1: identity file /Users/bnels21/.ssh/id_rsa-cert type -1 debug1: identity file /Users/bnels21/.ssh/id_dsa type -1 debug1: identity file /Users/bnels21/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9 debug1: match: OpenSSH_5.9 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.9 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA 1c:31:0e:56:93:45:dc:f0:77:6c:bd:90:27:3b:c6:43 debug1: Host 'localhost' is known and matches the RSA host key. debug1: Found key in /Users/bnels21/.ssh/known_hosts:11 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,keyboard-interactive debug1: Next authentication method: publickey debug1: Offering RSA public key: /Users/bnels21/.ssh/id_rsa debug1: Authentications that can continue: publickey,keyboard-interactive debug1: Offering RSA public key: id_rsa3 debug1: Authentications that can continue: publickey,keyboard-interactive debug1: Trying private key: /Users/bnels21/.ssh/id_dsa debug1: Next authentication method: keyboard-interactive Password: Any suggestions? I'm running OSX 10.8.

  Read the article

• Linux CentOS strange memory readings

  - by user2008937

  I am actually a young junior sys admin. I have a question - i am trying to understand how linux deals with memory... while playing around different monitoring programs I found some strange thing. When I run top on my laptop it shows me that FIREFOX process with pid 8778 takes 18,3% of memory (%MEM column). grep "MemTotal" /proc/meminfo Above command give me 1848336kb/1024 = 1805megs of memory (its ok - i have 2 gigs of ram). So if the firefox process takes 18,3% of MEM(according to tops %MEM column) then it takes 0.183 * 1805 which is approximately 325mb of memory. Quite a lot as for firefox... But well, in Linux there are lots of shared libraries that programs commonly uses (like famous libc). And those libraries are added to memory utilization of every process that uses it in the system, despite they are actually reading same file(single object in memory). So top may show too big mem utilization because of those shared libraries. Well, it is time to use PMAP which should show us the real mem utilization of process. But.. pmap -d $(pidof firefox) mapped: 983460K writeable/private: 757164K shared: 66416K so pmap shows that 983460/1024=993MB of memory is mapped to this process. It is in fact much bigger than mem utilization showed by top. Whats wrong here? How pmap can show more than top? even when top adds also the shared libraries (which in fact are single objects in memory) for each process that uses it? and pmap omits it? Regards Krzysztof

  Read the article

• ability to see free/busy detail information for conference rooms in Outlook 2007 and Microsoft hosted Exchange solution

  - by Malav

  recently my company migrated from an in-house Exchange server to the Microsoft hosted exchange online solution. My client is Outlook 2007. Before the migration, I could see the details of the meetings when I hovered on the busy blue bar for a resource such as a conference room. I could click on the meetings and see the invite list and the contents of the meeting. Ofcourse if the meeting was marked as private I could not. however after the migration to the online solution, I cannot see the detailed information. I can still see if the room is busy or not but I can no longer see the details of that meeting. The IT folks can see the information and they claim that they can see it because they have full admin rights. It is their claim that in the hosted Exchange solution you can either have full access (admin access) and see the details or not see anything but just that the room is busy. there is no middle ground such as being able to see the details of the meeting but not having any admin rights. For some reason I believe this to be not true. Can someone please verify my doubts and inform me of what needs to be done to see that information if my IT folks are wrong? thanks

  Read the article

• Vyatta masquerade out bridge interface

  - by miquella

  We have set up a Vyatta Core 6.1 gateway on our network with three interfaces: eth0 - 1.1.1.1 - public gateway/router IP (to public upstream router) eth1 - 2.2.2.1/24 - public subnet (connected to a second firewall 2.2.2.2) eth2 - 10.10.0.1/24 - private subnet Our ISP provided the 1.1.1.1 address for us to use as our gateway. The 2.2.2.1 address is so the other firewall (2.2.2.2) can communicate to this gateway which then routes the traffic out through the eth0 interface. Here is our current configuration: interfaces { bridge br100 { address 2.2.2.1/24 } ethernet eth0 { address 1.1.1.1/30 vif 100 { bridge-group { bridge br100 } } } ethernet eth1 { bridge-group { bridge br100 } } ethernet eth2 { address 10.10.0.1/24 } loopback lo { } } service { nat { rule 100 { outbound-interface eth0 source { address 10.10.0.1/24 } type masquerade } } } With this configuration, it routes everything, but the source address after masquerading is 1.1.1.1, which is correct, because that's the interface it's bound to. But because of some of our requirements here, we need it to source from the 2.2.2.1 address instead (what's the point of paying for a class C public subnet if the only address we can send from is our gateway!?). I've tried binding to br100 instead of eth0, but it doesn't seem to route anything if I do that. I imagine I'm just missing something simple. Any thoughts?

  Read the article

• Macvlan based interface pings from host but not from namespace

  - by jtlebi

  My setup: Private network vboxnet1 10.0.7.0/24 1 Host, ubuntu desktop 1 VM, ubuntu server (VirtualBox) Adressing layout: HOST: 10.0.7.1 VM: 10.0.7.101 VM MAC NAMESPACE: 10.0.7.102 On the VM, I ran the following commands: ip netns add mac # create a new nmespace ip link add link eth0 mac0 type macvlan # create a new macvlan interface ip link set mac0 netns mac On the mac namespace, inside the VM: ip link set lo up ip link set mac up ip addr add 10.0.7.102/24 dev mac0 So that we basically end up with: (Like Inception ?) +------------------------+ | Host: 10.0.7.1 | | | | +--------------------+ | | | VM: 10.0.7.101 | | | | | | | | +----------------+ | | | | | NS: 10.0.7.102 | | | | | | | | | | | +----------------+ | | | +--------------------+ | +------------------------+ What works: Ping between Host and VM Ping between NS and NS dhclient from NS What does not work: ping between NS and VM ping between NS and Host Where I started to go nuts: tcpdump on host (the real machine) actually shows ARP request AND replies tcpdump on NS shows ARP requests sent to the host tcpdump on VM makes the whole mess work (!) -- ping starts to get answers when tcpdump is started on the VM ?!? So, I bet you were eager for it, my question is: how to I make it work ? I suspect something's wrong with ARP on the macvlan inside the NS but can't figure out what exactly... Btw, I did the same expérimentations with the mac0 interface directly on the VM (no namespace) and it worked flawlessly.

  Read the article

• Why not block ICMP?

  - by Agvorth

  I think I almost have my iptables setup complete on my CentOS 5.3 system. Here is my script... # Establish a clean slate iptables -P INPUT ACCEPT iptables -P FORWARD ACCEPT iptables -P OUTPUT ACCEPT iptables -F # Flush all rules iptables -X # Delete all chains # Disable routing. Drop packets if they reach the end of the chain. iptables -P FORWARD DROP # Drop all packets with a bad state iptables -A INPUT -m state --state INVALID -j DROP # Accept any packets that have something to do with ones we've sent on outbound iptables -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT # Accept any packets coming or going on localhost (this can be very important) iptables -A INPUT -i lo -j ACCEPT # Accept ICMP iptables -A INPUT -p icmp -j ACCEPT # Allow ssh iptables -A INPUT -p tcp --dport 22 -j ACCEPT # Allow httpd iptables -A INPUT -p tcp --dport 80 -j ACCEPT # Allow SSL iptables -A INPUT -p tcp --dport 443 -j ACCEPT # Block all other traffic iptables -A INPUT -j DROP For context, this machine is a Virtual Private Server Web app host. In a previous question, Lee B said that I should "lock down ICMP a bit more." Why not just block it altogether? What would happen if I did that (what bad thing would happen)? If I need to not block ICMP, how could I go about locking it down more?

  Read the article

• Puppet write hosts using api call

  - by Ben Smith

  I'm trying to write a puppet function that calls my hosting environment (rackspace cloud atm) to list servers, then update my hosts file. My get_hosts function is currently this: require 'rubygems' require 'cloudservers' module Puppet::Parser::Functions newfunction(:get_hosts, :type => :rvalue) do |args| unless args.length == 1 raise Puppet::ParseError, "Must provide the datacenter" end DC = args[0] USERNAME = DC == "us" ? "..." : "..." API_KEY = DC == "us" ? "..." : "..." AUTH_URL = DC == "us" ? CloudServers::AUTH_USA : CloudServers::AUTH_UK DOMAIN = "..." cs = CloudServers::Connection.new(:username => USERNAME, :api_key => API_KEY, :auth_url => AUTH_URL) cs.list_servers_detail.map {|server| server.map {|s| { s[:name] + "." + DC + DOMAIN => { :ip => s[:addresses][:private][0], :aliases => s[:name] }}} } end end And I have a hosts.pp that calls this and 'should' write it to /etc/hosts. class hosts::us { $hosts = get_hosts("us") hostentry { $hosts: } } define hostentry() { host{ $name: ip => $name[ip], host_aliases => $name[aliases] } } As you can imagine, this isn't currently working and I'm getting a 'Symbol as array index at /etc/puppet/manifests/hosts.pp:2' error. I imagine, once I've realised what I'm currently doing wrong there will be more errors to come. Is this a good idea? Can someone help me work out how to do this?

  Read the article

• Juniper SSG20 IP settings for email server

  - by codemonkie

  We have 5 usable external static IP addresses leased by our ISP: .49 to .53, where .49 is assigned to the Juniper SSG20 firewall and NATed for 172.16.10.0/24 .50 is assigned to a windows box for web server and domain controller .51 is assigned to another windows box with exchange server (domain: mycompany1.com) mx record is pointing to 20x.xx.xxx.51 Currently there is a policy set for all SMTP incoming traffic addressed to .51 forward to the NATed address of the exchange server box (private IP: 172.16.10.194). We can send and receive emails for both internal and external, but the gmail is saying mails from mycomany1.com is not sent from the same IP as the mx lookup however is from 20x.xx.xxx.49: Received-SPF: neutral (google.com: 20x.xx.xxx.49 is neither permitted nor denied by best guess record for domain of [email protected]) client-ip=20x.xx.xxx.49; Authentication-Results: mx.google.com; spf=neutral (google.com: 20x.xx.xxx.49 is neither permitted nor denied by best guess record for domain of [email protected]) [email protected] and the mx record in global dns space as well as in the domain controller .50 for mail.mycompany1.com is set to 20x.xx.xxx.51 My attempt to resolve the above issue is to Update the mx record from 20x.xx.xxx.51 to 20x.xx.xxx.49 Create a new VIP for SMTP traffic addressed to 20x.xx.xxx.49 to forward to 172.16.10.194 After my changes incoming email stopped working, I believe it has something to do with the Juniper setting that SMTP addressed to .49 is not forwarded to 172.16.10.194 Also, I have been wondering is it mandatory to assign an external static IP address to the Juniper firewall? Any helps appreciated. TIA

  Read the article

• As an admin, what tools do you use to log what you do to your boxes?

  - by Jerry

  I am more of a linux applications developer than an admin. Over time, I've built servers and maintained them, sometimes to offer services, mostly just to develop the applications I work on. Way back when I would create a file in my account to keep notes on what I did on each machine, so that I could replicate that when I migrated to other machines. Nowadays, I install something a private trac installation, install it's blog plugin, and then use that to make notes of everything I install, and most commands that I run, as well as the output. This provides me a combination wiki and blog that I find very useful as a "captain's log". I do this mostly so that when I migrate to a new clean machine, I have a much easier time in bringing it up. And yet, I am always amazed when I see others just install this, delete that, run this, setup this config, ... without seeming to use any way to actually note what they are doing. What do YOU do, and what tools are available? I am especially interested in the transition between maintaining a few machines for a few people and maintaining several to dozens of machines providing a real service. What are the best practices, and where can I find good resources? Thanks!

  Read the article

• Vmware Workstation, Win7 host, Ubuntu guests with Nat + Host-only networks but they cannot connect to the Internet

  - by Ikon

  I have a Win7 host machine with Vmware Workstation. In the workstation I have 3 Ubuntu installed. All 3 Ubuntu guests have a Nat network - to access the internet without asking the router for a local address - and a Host-only network - to connect all Ubuntu quests and the host in a private network for internal communication, without touching the router. When I try to make any of the Ubuntu quests to get data from the internet - assuming that they would figure out that the Nat-ed interface can access the requested data - they fail and report that there is no route to my query. If I disconnect the 2nd interface on the Ubuntu guests with the Host-only network and restart networking, they start to know the route to the internet. Odd, during the installation of the guests they asked which of the 2 given interfaces - with Nat and Host-only config - should be used to get updates during installation and they oddly managed to get the updates. Not so after the installation has finished and rebooted. I have checked the Virtual Network Editor that the Nat interface should use my real network card to access the net, so there should be no problem. I wish not to use the router's dhcp service to give the Ubuntu quests an address, and also I don't want the guests to be accessable from the local network directly, but only by the host - that's the Host-only network is for. Any suggestions? Edit: 192.168.189.0 is the Nat interface and 192.168.7.0 is the Host-only. $ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.7.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 192.168.189.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 192.168.189.2 0.0.0.0 UG 100 0 0 eth0

  Read the article

• Nginx Ubuntu Postfix Config - Can't connect to incoming IMAP server 'server not responding' but can send mail via outgoing using same details?

  - by daveaspinall

  I'm pretty to new server admin and especially nginx but seem to be getting ok fine apart from accessing my mail via my iPhone? I've changed my domain to 'domain.com' The thing is I can send mail via my outgoing IMAP server but can't connect to the incoming one? I just get the message "the mail server at mail.domain.com is not responding" /etc/postfix/main.cf alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no broken_sasl_auth_clients = yes config_directory = /etc/postfix home_mailbox = Maildir/ inet_interfaces = all inet_protocols = all mailbox_command = mailbox_size_limit = 0 mydestination = domain.com, mail.domain.com, localhost.com, , localhost, localhost.localdomain mydomain = domain.com myhostname = mail.domain.com mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 myorigin = /etc/mailname recipient_delimiter = + relayhost = smtp_tls_note_starttls_offer = yes smtp_tls_security_level = may smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_local_domain = smtpd_sasl_security_options = noanonymous smtpd_tls_CAfile = /etc/ssl/certs/cacert.pem smtpd_tls_auth_only = no smtpd_tls_cert_file = /etc/ssl/certs/smtpd.crt smtpd_tls_key_file = /etc/ssl/private/smtpd.key smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes smtpd_tls_security_level = may smtpd_tls_session_cache_timeout = 3600s tls_random_source = dev:/dev/urandom telnet localhost 25 ehlo locahost 250-mail.domain.com 250-PIPELINING 250-SIZE 10240000 250-VRFY 250-ETRN 250-STARTTLS 250-AUTH LOGIN PLAIN 250-AUTH=LOGIN PLAIN 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN Using the following details to connect: username password hostname: mail.domain.com port: 25 iptables --list Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination I also sent mail to the server as a test and got this missage if it helps? Technical details of temporary failure: [mail.domain.com. (10): Connection refused] I also looked in /var/log/mail.log and it has multiple entries of: postfix/smtpd[12239]: connect from 5acefc9a.bb.sky.com[90.206.252.xxx] Mar 23 06:47:09 new-domain postfix/smtpd[12239]: lost connection after CONNECT from 5acefc9a.bb.sky.com[90.206.252.154] Notice new-domain which is incorrect but the server hostname and hostname in the configs are correct? I recently moves servers and the host has set the primary domain on the service as new-domain.com so this may be the issue? Like I said, it works to connect to outgoing server, but incoming gets the not responding error? Any idea would be much appreciated!

  Read the article

• Apache Redirect is redirecting all HTTP instead of just one subdomain

  - by David Kaczynski

  All HTTP requests, such as http://example.com, are getting redirected to https://redmine.example.com, but I only want http://redmine.example.com to be redirected. For example, requests for I have the following in my 000-default configuration: <VirtualHost *:80> ServerName redmine.example.com DocumentRoot /usr/share/redmine/public Redirect permanent / https://redmine.example.com </VirtualHost> <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> . . . </VirtualHost> Here is my default-ssl configuration: <VirtualHost *:443> ServerName redmine.example.com DocumentRoot /usr/share/redmine/public SSLEngine on SSLCertificateFile /etc/ssl/certs/ssl-cert-snakeoil.pem SSLCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key BrowserMatch "MSIE [2-6]" \ nokeepalive ssl-unclean-shutdown \ downgrade-1.0 force-response-1.0 BrowserMatch "MSIE [17-9]" ssl-unclean-shutdown <Directory /usr/share/redmine/public> Options FollowSymLinks AllowOverride None Order allow,deny Allow from all </Directory> LogLevel info ErrorLog /var/log/apache2/redmine-error.log CustomLog /var/log/apache2/redmine-access.log combined </VirtualHost> <VirtualHost *:443> ServerAdmin webmaster@localhost DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> . . . </VirtualHost> Is there anything here that is cause all HTTP requests to be redirected to https://redmine.example.com?

  Read the article

• EC2 AMI won't boot after edit

  - by Eric Lars0n

  I did something stupid, I got a new laptop and copied everything over to the new one, then wiped the old one clean. Then I realized that I forgot to copy the private key out of .ssh that I use to connect to my AWS EBS backed instance. So I can't log in to my custom AMI. So I created a new Volume from the Snapshot of the AMI, then started up a public instance and attached the Volume to it, edit the sshd_config to allow for password log in. Unmounted the volume, detached it, made a snapshot of it, then made a new AMI from the snapshot. The new AMI launches, but never passes the Status Checks and is not reachable. What am I doing wrong? Or alternatively how can I fix my problem? Edit: Adding some of the console output Linux version 2.6.16-xenU ([email protected]) (gcc version 4.0.1 20050727 (Red Hat 4.0.1-5)) #1 SMP Mon May 28 03:41:49 SAST 2007 BIOS-provided physical RAM map: Xen: 0000000000000000 - 000000006a400000 (usable) 980MB HIGHMEM available. 727MB LOWMEM available. NX (Execute Disable) protection: active IRQ lockup detection disabled RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize NET: Registered protocol family 2 Registering block device major 8 XENBUS: Timeout connecting to devices! Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,0)

  Read the article

• Ubuntu: Network connection seems to fail after some time

  - by chrischu

  I just bought a Shuttle XS-35 barebone mini-PC and put a 1 TB WD hard drive and 2 Gigs of RAM into it and installed Ubuntu onto it. The machine will post as a media server (streaming videos to my PS3) and as a webserver for some small private projects. Now I wanted to copy my videos from my Windows 7 machine to the Ubuntu machine and therefore created a Samba share on the Ubuntu machine. I tried copying the files with the standard Windows copy function and with SyncToy but after some time (sometimes 5 copied files, sometimes 120 copied files) the Samba share just disappears. When that happens I can't reach the internet from the Ubuntu machine although the network connection still seems to be fine (IP still there etc.). Between the machines lies a LinkSys router. When I try to ping my router (after the connection doesn't work anymore) from the Ubuntu machine only a very small subset of the packages actually get there (something around 20%). When I restart the Ubuntu machine everything seems to work normal again. I have no idea where the problem lies here. Does anybody have a clue? Thanks in advance!

  Read the article

• How do you backup your own files? [on hold]

  - by Antonis Christofides

  I'm a system administrator and I use rsnapshot to backup some servers, duplicity for some others. Both work fine, each one with advantages and disadvantages. Despite that, I am at a loss on how to backup my own private files. I'd use duplicity to automatically backup my files to a remote server; but the problem is that once in a while I must do a full backup. My emails and important files are 9G, and I expect this to increase. Uploading through aDSL at 1Mbit would be 20 hours. Too much. rsnapshot doesn't require periodic full backups (only the first time), but it must be running on the remote server and have a means to connect to my computer; if the server is compromised (or simply if the NSA decides to use it), my own machine is also compromised. Not good. The only solution I've come up with is use encfs, use unison to synchronize the files to a remote server, and use duplicity or rsnapshot on the remote server to backup these files. In that case, the question is whether I can sync the files on many computers; is it possible for encfs to be used with the same key on many computers? I also think that if I append one character to the unencrypted file, its encrypted encfs counterpart might change a lot, so that incrementals with duplicity would be less efficient—but not a big deal. Maybe also, when I need to restore a file, finding the correct file to restore could be a pain, because of filename encryption. I wonder whether there is any other possibility that I've overlooked. Maybe I'm asking too much for my personal use, and I should settle with an external disk?

  Read the article

• How to tell nginx to honor backend's cache?

  - by ChocoDeveloper

  I'm using php-fpm with nginx as http server (I don't know much about reverse proxies, I just installed it and didn't touch anything), without Apache nor Varnish. I need nginx to understand and honor the http headers I send. I tried with this config (taken from the docs) but didn't work: /etc/nginx/nginx.conf: fastcgi_cache_path /var/lib/nginx/cache levels=1:2 keys_zone=website:10m inactive=10m; fastcgi_cache_key "$scheme$request_method$host$request_uri"; /etc/nginx/sites-available/website: server { fastcgi_cache website; #fastcgi_cache_valid 200 302 1h; #fastcgi_cache_valid 301 1d; #fastcgi_cache_valid any 1m; #fastcgi_cache_min_uses 1; #fastcgi_cache_use_stale error timeout invalid_header http_503; add_header X-Cache $upstream_cache_status; } I always get "MISS" and the cache dir is empty. If I uncomment the other directives, I get hit, but I don't want those "dumb" settings, I need to control them within my backend. For example, if my backend says "public, s-maxage=10", the cache should be considered stale after 10 secs. Instead, nginx will store it for 1h, because of these directives. I was thinking whether I should try proxy_cache, not sure what's the difference. In both fastcgi and proxy modules docs it says this: The cache honors backend's Cache-Control, Expires, and etc. since version 0.7.48, Cache-Control: private and no-store only since 0.7.66, though. Vary handling is not implemented. nginx version: nginx/1.1.19 Any thoughts? pd: I also have the reverse proxy that is offered by Symfony2 (which I turn off to use nginx's). The headers are interpreted correctly by it, so I think I'm doing it right.

  Read the article

< Previous Page | 411 412 413 414 415 416 417 418 419 420 421 422  | Next Page >